# DIN 125 — DIN / ISO / BS fastener equivalents and the sizes where they are not interchangeable

For DIN 125, iso standard is ISO 7089, 7090; part is Washer, Plain; interchangeability verdict is Fully interchangeable, verified against its source on 2026-08-05.

- **DIN standard:** DIN 125 _(verified: appears in the quote below)_
- **ISO standard:** ISO 7089, 7090 _(verified: appears in the quote below)_
- **Part:** Washer, Plain _(verified: appears in the quote below)_
- **Interchangeability verdict:** Fully interchangeable _(verified: appears in the quote below)_

## What the source says

> Washer, Plain | DIN 125 | ISO 7089, 7090 | Fully interchangeable | Normal vs chamfered faces.

## Sources disagree

More than one authority states this, and they do not state the same
thing. Both are reproduced with the source each came from.

### ISO standard

monsterbolts.com says iso standard is **ISO 7089, 7090**, as of 2026-08-05.

> Washer, Plain | DIN 125 | ISO 7089, 7090 | Fully interchangeable | Normal vs chamfered faces.

Source: https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners

trfastenings.com says iso standard is **ISO 7089**, as of 2026-08-05.

> DIN 125 | ISO 7089 | | Washers; medium type, primarily for hexagon bolts |

Source: https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards


### Part

monsterbolts.com says part is **Washer, Plain**, as of 2026-08-05.

> Washer, Plain | DIN 125 | ISO 7089, 7090 | Fully interchangeable | Normal vs chamfered faces.

Source: https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners

trfastenings.com says part is **Washers; medium type, primarily for hexagon bolts**, as of 2026-08-05.

> DIN 125 | ISO 7089 | | Washers; medium type, primarily for hexagon bolts |

Source: https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards


## Source

- https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards

Last verified: 2026-08-05. Review by: 2029-08-04.
Part of [DIN / ISO / BS fastener equivalents and the sizes where they are not interchangeable](https://referencesource.org/fastener-standard-interchangeability-exceptions/).