# PowerBrick SC — Solar inverter–battery compatibility

For PowerBrick SC, inverter brand is Victron; battery brand is Dyness; nominal voltage is 51.2 V; communication interface is BMS-Can; minimum firmware is v3.31, verified against its source on 2026-10-12.

- **Inverter brand:** Victron _(verified: appears in its own passage below)_
- **Battery brand:** Dyness _(verified: appears in its own passage below)_
- **Battery model:** PowerBrick SC _(verified: appears in the quote below)_
- **Nominal voltage:** 51.2 V _(verified: appears in the quote below)_
- **Communication interface:** BMS-Can _(verified: appears in its own passage below)_
- **Minimum firmware:** v3.31 _(verified: appears in its own passage below)_
- **Restrictions or notes:** Only 48 V Victron inverter/charger models are compatible with Dyness low-voltage batteries. 12 V and 24 V models are not supported. _(verified: appears in its own passage below)_

## What the source says

> PowerBrick SC | 16.07 | 51.2 V | 314 |

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Inverter brand

> Dyness batteries communicate with the Victron GX device over BMS-Can.

### Battery brand

> Dyness batteries communicate with the Victron GX device over BMS-Can.

### Communication interface

> Dyness batteries communicate with the Victron GX device over BMS-Can.

### Minimum firmware

> Device | Minimum firmware version | Notes | Victron GX device (Venus OS) | v3.31 |

### Restrictions or notes

> Important: Only 48 V Victron inverter/charger models are compatible with Dyness low-voltage batteries. 12 V and 24 V models are not supported.

## Source

- https://www.victronenergy.com/live/battery_compatibility:dyness

Last verified: 2026-10-12. Review by: 2027-04-10.
Part of [Solar inverter–battery compatibility](https://referencesource.org/solar-inverter-panel-battery-compatibility/).