# GME33.04 - PET neck finish 24/18-11,5-1/3,18-1,5 turns for HPC applications — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

For GME33.04 - PET neck finish 24/18-11,5-1/3,18-1,5 turns for HPC applications, specification type is neck_finish; description is This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 23,67 mm and denominated as 24/18-11,5-1/3,18-1,5 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also , recorded from its source on 2026-09-23.

- **Specification ID:** GME33.04 - PET neck finish 24/18-11,5-1/3,18-1,5 turns for HPC applications _(our reading, not quoted from the source)_
- **Specification type:** neck_finish _(our reading, not quoted from the source)_
- **Description:** This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 23,67 mm and denominated as 24/18-11,5-1/3,18-1,5 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ... _(verified: appears in the quote below)_

## What the source says

> This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 23,67 mm and denominated as 24/18-11,5-1/3,18-1,5 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ...

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Specification ID

> GME33.04 - PET neck finish 24/18-11,5-1/3,18-1,5 turns for HPC applications

## Source

- https://www.cetie.org/en/finish-data-sheets-gme_102.html

Last verified: 2026-09-23. Review by: 2028-09-22.
Part of [Packaging specification equivalence: neck finishes, corrugated grades and pallet standards](https://referencesource.org/packaging-material-specification-equivalence/).