# GME30.43 - PET finish 47/41-19,5-3/3,40 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

For GME30.43 - PET finish 47/41-19,5-3/3,40, specification type is neck_finish, recorded from its source on 2026-09-23.

- **Specification ID:** GME30.43 - PET finish 47/41-19,5-3/3,40 _(our reading, not quoted from the source)_
- **Specification type:** neck_finish _(our reading, not quoted from the source)_
- **Description:** This document provides specifications and dimensions of the 47 mm screw finish with three (3) thread starts for non-carbonated pressurised and non-pressurised beverages. This finish can be used for filling with introduction of nitrogen (internal overpressure should not exceed 1 bar). The ... _(verified: appears in the quote below)_

## What the source says

> This document provides specifications and dimensions of the 47 mm screw finish with three (3) thread starts for non-carbonated pressurised and non-pressurised beverages. This finish can be used for filling with introduction of nitrogen (internal overpressure should not exceed 1 bar). The ...

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Specification ID

> GME30.43 - PET finish 47/41-19,5-3/3,40

## Source

- https://www.cetie.org/en/finish-data-sheets-gme_102.html

Last verified: 2026-09-23. Review by: 2028-09-22.
Part of [Packaging specification equivalence: neck finishes, corrugated grades and pallet standards](https://referencesource.org/packaging-material-specification-equivalence/).