# GME30.41 - PET finish 26/22-13,4-1/2,3 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

For GME30.41 - PET finish 26/22-13,4-1/2,3, specification type is neck_finish; description is This experimental data sheet provides specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages, Up to 10,2g CO2/l (5,2 vol CO2) content for bottles of up to and including 2,0 litres in capacity, and up to 8,8g CO2/l (4,5 vol CO2) , recorded from its source on 2026-09-23.

- **Specification ID:** GME30.41 - PET finish 26/22-13,4-1/2,3 _(our reading, not quoted from the source)_
- **Specification type:** neck_finish _(our reading, not quoted from the source)_
- **Description:** This experimental data sheet provides specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages, Up to 10,2g CO2/l (5,2 vol CO2) content for bottles of up to and including 2,0 litres in capacity, and up to 8,8g CO2/l (4,5 vol CO2) ... _(verified: appears in the quote below)_

## What the source says

> This experimental data sheet provides specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages, Up to 10,2g CO2/l (5,2 vol CO2) content for bottles of up to and including 2,0 litres in capacity, and up to 8,8g CO2/l (4,5 vol CO2) ...

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Specification ID

> GME30.41 - PET finish 26/22-13,4-1/2,3

## Source

- https://www.cetie.org/en/finish-data-sheets-gme_102.html

Last verified: 2026-09-23. Review by: 2028-09-22.
Part of [Packaging specification equivalence: neck finishes, corrugated grades and pallet standards](https://referencesource.org/packaging-material-specification-equivalence/).