# GME30.39 - PET finish 25/22-9,5-3/1,73 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

For GME30.39 - PET finish 25/22-9,5-3/1,73, specification type is neck_finish, recorded from its source on 2026-09-23.

- **Specification ID:** GME30.39 - PET finish 25/22-9,5-3/1,73 _(our reading, not quoted from the source)_
- **Specification type:** neck_finish _(our reading, not quoted from the source)_
- **Description:** This document provides specifications and dimensions of the 25 mm screw finish with three (3) thread starts for flat waters and non carbonated beverages in small package sizes with up to 1.5 l volume. This finish can be used for aseptic filling and filling with introduction of nitrogen (internal ... _(verified: appears in the quote below)_

## What the source says

> This document provides specifications and dimensions of the 25 mm screw finish with three (3) thread starts for flat waters and non carbonated beverages in small package sizes with up to 1.5 l volume. This finish can be used for aseptic filling and filling with introduction of nitrogen (internal ...

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Specification ID

> GME30.39 - PET finish 25/22-9,5-3/1,73

## Source

- https://www.cetie.org/en/finish-data-sheets-gme_102.html

Last verified: 2026-09-23. Review by: 2028-09-22.
Part of [Packaging specification equivalence: neck finishes, corrugated grades and pallet standards](https://referencesource.org/packaging-material-specification-equivalence/).