# GME30.31 - PET finish 32/26-15,8-2/2,7-(HF) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

For GME30.31 - PET finish 32/26-15,8-2/2,7-(HF), specification type is neck_finish; description is This document provides specifications and dimensions of the 32 mm amorphous screw finish with two (2) thread starts for still waters and non-carbonated beverages (the internal pressure should not exceed 1 bar). This finish can be used for hot filling (HF) with a maximum temperature up to , recorded from its source on 2026-09-23.

- **Specification ID:** GME30.31 - PET finish 32/26-15,8-2/2,7-(HF) _(our reading, not quoted from the source)_
- **Specification type:** neck_finish _(our reading, not quoted from the source)_
- **Description:** This document provides specifications and dimensions of the 32 mm amorphous screw finish with two (2) thread starts for still waters and non-carbonated beverages (the internal pressure should not exceed 1 bar). This finish can be used for hot filling (HF) with a maximum temperature up to ... _(verified: appears in the quote below)_

## What the source says

> This document provides specifications and dimensions of the 32 mm amorphous screw finish with two (2) thread starts for still waters and non-carbonated beverages (the internal pressure should not exceed 1 bar). This finish can be used for hot filling (HF) with a maximum temperature up to ...

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Specification ID

> GME30.31 - PET finish 32/26-15,8-2/2,7-(HF)

## Source

- https://www.cetie.org/en/finish-data-sheets-gme_102.html

Last verified: 2026-09-23. Review by: 2028-09-22.
Part of [Packaging specification equivalence: neck finishes, corrugated grades and pallet standards](https://referencesource.org/packaging-material-specification-equivalence/).