# GME30.26 - PET finish 29/25-12,6-3/2,17 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

For GME30.26 - PET finish 29/25-12,6-3/2,17, specification type is neck_finish, recorded from its source on 2026-09-23.

- **Specification ID:** GME30.26 - PET finish 29/25-12,6-3/2,17 _(our reading, not quoted from the source)_
- **Specification type:** neck_finish _(our reading, not quoted from the source)_
- **Description:** Specifications and dimensions of the 29 mm screw finish with three (3) thread starts for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. The dimension (12.6) is the height in millimetres from the top of finish to ... _(verified: appears in the quote below)_

## What the source says

> Specifications and dimensions of the 29 mm screw finish with three (3) thread starts for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. The dimension (12.6) is the height in millimetres from the top of finish to ...

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Specification ID

> GME30.26 - PET finish 29/25-12,6-3/2,17

## Source

- https://www.cetie.org/en/finish-data-sheets-gme_102.html

Last verified: 2026-09-23. Review by: 2028-09-22.
Part of [Packaging specification equivalence: neck finishes, corrugated grades and pallet standards](https://referencesource.org/packaging-material-specification-equivalence/).