# Measuring systems for the continuous and dynamic measurement of quantities of liquids other than water · Annex VII · meters (line B of Table 2), quantities ≥ 2 litres, class 1,5 — Accuracy classes and maximum permissible errors for trade measuring instruments

For Measuring systems for the continuous and dynamic measurement of quantities of liquids other than water, annex is Annex VII; condition is meters (line B of Table 2), quantities ≥ 2 litres, class 1,5; accuracy class is 1,5; maximum permissible error is 1,0 %, recorded from its source on 2026-09-01.

- **Instrument type:** Measuring systems for the continuous and dynamic measurement of quantities of liquids other than water _(verified: appears in its own passage below)_
- **Annex:** Annex VII _(verified: appears in its own passage below)_
- **Accuracy class:** 1,5 _(verified: appears in its own passage below)_
- **Condition:** meters (line B of Table 2), quantities ≥ 2 litres, class 1,5 _(our reading, not quoted from the source)_
- **Maximum permissible error:** 1,0 % _(verified: appears in its own passage below)_

## What the source says

> 2.1. For quantities equal to or greater than 2 litres the MPE on indications is: Table 2 | Accuracy Class | | 0,3 | 0,5 | 1,0 | 1,5 | 2,5 | Measuring systems (A) | 0,3 % | 0,5 % | 1,0 % | 1,5 % | 2,5 % | Meters (B) | 0,2 % | 0,3 % | 0,6 % | 1,0 % | 1,5 % | 2.2. For quantities less than two litres the MPE on indications is:

## Where each value comes from

This source states these in separate places, so each value is shown with the passage it comes from.

### Instrument type

> ANNEX VII MEASURING SYSTEMS FOR THE CONTINUOUS AND DYNAMIC MEASUREMENT OF QUANTITIES OF LIQUIDS OTHER THAN WATER (MI-005) The relevant essential requirements of Annex I, the specific requirements of this Annex and the conformity assessment procedures listed in this Annex, apply to measuring systems intended for the continuous and dynamic measurement of quantities (volumes or masses) of liquids other than water.

### Annex

> ANNEX VII MEASURING SYSTEMS FOR THE CONTINUOUS AND DYNAMIC MEASUREMENT OF QUANTITIES OF LIQUIDS OTHER THAN WATER (MI-005)

### Accuracy class

The source prints this value inside the passage below but does not name it there. The passage shows where it appears; what ties it to this record is the position on the page, not anything the passage says.

> 2.1. For quantities equal to or greater than 2 litres the MPE on indications is: Table 2 | Accuracy Class | | 0,3 | 0,5 | 1,0 | 1,5

### Maximum permissible error

> 2.1. For quantities equal to or greater than 2 litres the MPE on indications is: Table 2 | Accuracy Class | | 0,3 | 0,5 | 1,0 | 1,5 | 2,5 | Measuring systems (A) | 0,3 % | 0,5 % | 1,0 % | 1,5 % | 2,5 % | Meters (B) | 0,2 % | 0,3 % | 0,6 % | 1,0 %

## Source

- https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32014L0032

Last verified: 2026-09-01. Review by: 2027-09-01.
Part of [Accuracy classes and maximum permissible errors for trade measuring instruments](https://referencesource.org/legal-metrology-accuracy-classes/).