ISO 287:2009 specifies an oven-drying method for the determination of the moisture content of a lot of paper and board.
ISO 287:2009 is applicable to every type of lot of paper and board, including corrugated board and solid board, provided that the paper or board does not contain any substances, other than water, that are volatile at the temperature specified in ISO 287:2009.
For the determination of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2870:1973 - **Identifier:** ISO 2870:1973 _(verified: appears in the quote below)_ - **Item title:** Surface active agents — Detergents — Anionic-active matter hydrolyzable under acid conditions — Determination of hydrolyzable and non-hydrolyzable anionic-active matter _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2870:1986 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 7883,IS,,ISO 2870:1973,Surface active agents — Detergents — Anionic-active matter hydrolyzable under acid conditions — Determination of hydrolyzable and non-hydrolyzable anionic-active matter,Agents de surface — Détergents — Matière active anionique hydrolysable en milieu acide — Détermination de la matière active anionique hydrolysable et non hydrolysable,1973-12-01,1,['71.100.40'],ISO/TC 91,9599,,[7884],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2870:1986 - **Identifier:** ISO 2870:1986 _(verified: appears in the quote below)_ - **Item title:** Surface active agents — Detergents — Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2870:2009 - **Withdrawn / published date:** 1986-05-01 _(verified: appears in the quote below)_ > 7884,IS,,ISO 2870:1986,Surface active agents — Detergents — Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions,Agents de surface — Détergents — Détermination de la matière active anionique hydrolysable et non hydrolysable en milieu acide,1986-05-01,2,['71.100.40'],ISO/TC 91,9599,[7883],[45657],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28706-2:2008 - **Identifier:** ISO 28706-2:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28706-2:2017 - **Withdrawn / published date:** 2008-11-17 _(verified: appears in the quote below)_ > 44894,IS,,ISO 28706-2:2008,"Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours","Émaux vitrifiés — Détermination de la résistance à la corrosion chimique — Partie 2: Détermination de la résistance à la corrosion chimique par des acides bouillants ou des liquides neutres bouillants, et/ou leurs vapeurs",2008-11-17,1,['25.220.50'],ISO/TC 107,9599,"[7708,1679,1346,7723]",[63869],"['en','fr']",15,"
ISO 28706-2:2008 describes a test method for the determination of the resistance of flat surfaces of vitreous and porcelain enamels to boiling ac Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28706-3:2008 - **Identifier:** ISO 28706-3:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28706-3:2017 - **Withdrawn / published date:** 2008-11-17 _(verified: appears in the quote below)_ > 44895,IS,,ISO 28706-3:2008,Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel,Émaux vitrifiés — Détermination de la résistance à la corrosion chimique — Partie 3: Détermination de la résistance à la corrosion chimique par des liquides alcalins dans un récipient hexagonal,2008-11-17,1,['25.220.50'],ISO/TC 107,9599,"[10447,10445]",[66647],"['en','fr']",10,
ISO 28706-3:2008 describes a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack by alkaline liquids at temperatures between 25 °C and 95 °C. The app Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28706-4:2008 - **Identifier:** ISO 28706-4:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28706-4:2016 - **Withdrawn / published date:** 2008-11-17 _(verified: appears in the quote below)_ > 44896,IS,,ISO 28706-4:2008,Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel,Émaux vitrifiés — Détermination de la résistance à la corrosion chimique — Partie 4: Détermination de la résistance à la corrosion chimique par des liquides alcalins dans un récipient cylindrique,2008-11-17,1,['25.220.50'],ISO/TC 107,9599,"[1499,1535]",[66378],"['en','fr']",11,
ISO 28706-4:2008 describes a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack by alkaline liquids at temperatures between 25 °C and 95 °C. The a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28706-5:2008 - **Identifier:** ISO 28706-5:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28706-5:2010 - **Withdrawn / published date:** 2008-11-17 _(verified: appears in the quote below)_ > 44897,IS,,ISO 28706-5:2008,Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems,Émaux vitrifiés — Détermination de la résistance à la corrosion chimique — Partie 5: Détermination de la résistance à la corrosion chimique en milieux fermés,2008-11-17,1,['25.220.50'],ISO/TC 107,9599,[22971],[56200],['en'],11,"
ISO 28706-5:2008 specifies a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack in closed systems by acid, neutral and alkaline liquids, as well as by actual process mixes.
It applies primarily to the testing of enamels Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2871-1:1988 - **Identifier:** ISO 2871-1:1988 _(verified: appears in the quote below)_ - **Item title:** Surface active agents — Detergents — Determination of cationic-active matter content — Part 1: High-molecular-mass cationic-active matter _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2871-1:2010 - **Withdrawn / published date:** 1988-10-20 _(verified: appears in the quote below)_ > 7887,IS,,ISO 2871-1:1988,Surface active agents — Detergents — Determination of cationic-active matter content — Part 1: High-molecular-mass cationic-active matter,Agents de surface — Détergents — Détermination de la teneur en matière active cationique — Partie 1: Matière active cationique à haute masse moléculaire,1988-10-20,1,['71.100.40'],ISO/TC 91,9599,[7885],[53739],"['en','fr']",2,"
An aliquot portion of a standard solution of sodium lauryl sulfate is titrated with a solution of the test sample, according to the direct two-phase titration procedure describes in ISO 2271. The method is applicable to solids or to aqueous solutions of the active material. The relative molecular mass of t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2871:1973 - **Identifier:** ISO 2871:1973 _(verified: appears in the quote below)_ - **Item title:** Surface active agents — Detergents — Determination of cationic-active matter — Direct two-phase titration procedure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2871-1:1988 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 7885,IS,,ISO 2871:1973,Surface active agents — Detergents — Determination of cationic-active matter — Direct two-phase titration procedure,Agents de surface — Détergents — Détermination de la teneur en matière active cationique — Méthode par le titrage direct dans deux phases,1973-12-01,1,['71.100.40'],ISO/TC 91,9599,,[7887],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2871-2:1990 - **Identifier:** ISO 2871-2:1990 _(verified: appears in the quote below)_ - **Item title:** Surface active agents — Detergents — Determination of cationic-active matter content — Part 2: Cationic-active matter of low molecular mass (between 200 and 500) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2871-2:2010 - **Withdrawn / published date:** 1990-11-22 _(verified: appears in the quote below)_ > 7888,IS,,ISO 2871-2:1990,Surface active agents — Detergents — Determination of cationic-active matter content — Part 2: Cationic-active matter of low molecular mass (between 200 and 500),Agents de surface — Détergents — Détermination de la teneur en matière active cationique — Partie 2: Matière active cationique à faible masse moléculaire (entre 200 et 500),1990-11-22,1,['71.100.40'],ISO/TC 91,9599,,[53740],"['en','fr']",4,"
The method is also suitable for other cationic-active materials. Not applicable if anionic and/or amphoteric surface active agents are present. The sample is titrated in a two-phase (aqueous chloroform) system against a standard anionic surface active agent in the pres Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2872-1:1973 - **Identifier:** ISO 2872-1:1973 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Part 1: Compression test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2872:1985 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 7889,IS,,ISO 2872-1:1973,"Packaging — Complete, filled transport packages — Part 1: Compression test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de compression,1973-12-01,1,['55.180.40'],ISO/TC 122,9599,,[7890],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2872:1985 - **Identifier:** ISO 2872:1985 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Compression test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12048:1994 - **Withdrawn / published date:** 1985-12-05 _(verified: appears in the quote below)_ > 7890,IS,,ISO 2872:1985,"Packaging — Complete, filled transport packages — Compression test",Emballages — Emballages d'expédition complets et pleins — Essai de compression,1985-12-05,2,['55.020'],ISO/TC 122/SC 3,9599,[7889],[20810],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28721-1:2008 - **Identifier:** ISO 28721-1:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28721-1:2019 - **Withdrawn / published date:** 2008-11-20 _(verified: appears in the quote below)_ > 45036,IS,,ISO 28721-1:2008,"Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories","Émaux vitrifiés — Appareils émaillés pour les installations industrielles — Partie 1: Exigences de qualité relatives aux appareillages, composants, appareils et accessoires",2008-11-20,1,['25.220.50'],ISO/TC 107,9599,,[75430],"['en','fr']",19,"
ISO 28721-1:2008 specifies the quality requirements for apparatus, components, appliances and accessories of glass-lined steel (including semi-crystallized enamel coatings) and glass-lined steel castings used for process plants. It specifies the quality requiremen Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28721-2:2008 - **Identifier:** ISO 28721-2:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28721-2:2015 - **Withdrawn / published date:** 2008-11-20 _(verified: appears in the quote below)_ > 44899,IS,,ISO 28721-2:2008,Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock,Émaux vitrifiés — Appareils émaillés pour les installations industrielles — Partie 2: Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique,2008-11-20,1,['25.220.50'],ISO/TC 107,9599,,[66379],"['en','fr']",3,"
ISO 28721-2:2008 specifies requirements for the resistance to chemical attack and thermal shock of chemical enamels and their designation for ordering purposes.
It is applicable to enamelled apparatus, piping and other components primarily used for proces Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28721-2:2015 - **Identifier:** ISO 28721-2:2015 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28721-2:2025 - **Withdrawn / published date:** 2015-11-30 _(verified: appears in the quote below)_ > 66379,IS,,ISO 28721-2:2015,Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock,Émaux vitrifiés — Appareils émaillés pour les installations industrielles — Partie 2: Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique,2015-11-30,2,['25.220.50'],ISO/TC 107,9599,[44899],[86916],"['en','fr']",3,"
ISO 28721-2:2015 specifies requirements for the resistance to chemical attack and thermal shock of chemical enamels and their designation for ordering purposes.
It is applicable to enamelled apparatus, piping and other components primarily used for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28721-4:2010 - **Identifier:** ISO 28721-4:2010 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28721-4:2015 - **Withdrawn / published date:** 2010-09-20 _(verified: appears in the quote below)_ > 56670,IS,,ISO 28721-4:2010,Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings,Émaux vitrifiés — Appareils émaillés pour les installations industrielles — Partie 4: Exigences de qualité pour les tubes et raccords à brides en acier émaillé,2010-09-20,1,['25.220.50'],ISO/TC 107,9599,,[66085],"['en','fr']",5,
ISO 28721-4:2010 specifies the quality requirements for glass-lined flanged steel pipes and flanged steel fittings used for process plants.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2873-1:1973 - **Identifier:** ISO 2873-1:1973 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Part 1: Low pressure test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2873:1985 - **Withdrawn / published date:** 1973-07-01 _(verified: appears in the quote below)_ > 7891,IS,,ISO 2873-1:1973,"Packaging — Complete, filled transport packages — Part 1: Low pressure test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de basse pression,1973-07-01,1,['55.180.40'],ISO/TC 122,9599,,[7892],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2873:1985 - **Identifier:** ISO 2873:1985 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Low pressure test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2873:2000 - **Withdrawn / published date:** 1985-12-05 _(verified: appears in the quote below)_ > 7892,IS,,ISO 2873:1985,"Packaging — Complete, filled transport packages — Low pressure test",Emballages — Emballages d'expédition complets et pleins — Essai de basse pression,1985-12-05,2,['55.180.40'],ISO/TC 122/SC 3,9599,[7891],[32413],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2874-1:1973 - **Identifier:** ISO 2874-1:1973 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Part 1: Stacking test using compression tester _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2874:1985 - **Withdrawn / published date:** 1973-10-01 _(verified: appears in the quote below)_ > 7893,IS,,ISO 2874-1:1973,"Packaging — Complete, filled transport packages — Part 1: Stacking test using compression tester",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de gerbage à l'aide d'une machine d'essai à compression,1973-10-01,1,['55.180.40'],ISO/TC 122,9599,,[7894],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2874:1985 - **Identifier:** ISO 2874:1985 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Stacking test using compression tester _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12048:1994 - **Withdrawn / published date:** 1985-12-05 _(verified: appears in the quote below)_ > 7894,IS,,ISO 2874:1985,"Packaging — Complete, filled transport packages — Stacking test using compression tester",Emballages — Emballages d'expédition complets et pleins — Essai de gerbage à l'aide d'une machine d'essai de compression,1985-12-05,2,['55.180.40'],ISO/TC 122/SC 3,9599,[7893],[20810],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28741:2009 - **Identifier:** ISO 28741:2009 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28741:2013 - **Withdrawn / published date:** 2009-06-05 _(verified: appears in the quote below)_ > 44904,IS,,ISO 28741:2009,Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions,Véhicules routiers — Bougies d'allumage et leur logement dans la culasse — Caractéristiques élémentaires et dimensions,2009-06-05,1,['43.060.50'],ISO/TC 22,9599,,[56857],"['en','fr']",25,"ISO 28741:2009 specifies the main properties and dimensions of spark-plugs, including the terminals and the dimensions of their cylinder head housings, for use with spark-ignition engines.
ISO 28741:2009 does not cover screened and waterproof spark-plugs.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28741:2009/Cor 1:2009 - **Identifier:** ISO 28741:2009/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28741:2013 - **Withdrawn / published date:** 2009-12-03 _(verified: appears in the quote below)_ > 55079,IS,Cor,ISO 28741:2009/Cor 1:2009,Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions — Technical Corrigendum 1,Véhicules routiers — Bougies d'allumage et leur logement dans la culasse — Caractéristiques élémentaires et dimensions — Rectificatif technique 1,2009-12-03,1,['43.060.50'],ISO/TC 22,9599,,[56857],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28741:2013 - **Identifier:** ISO 28741:2013 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28741:2023 - **Withdrawn / published date:** 2013-10-30 _(verified: appears in the quote below)_ > 56857,IS,,ISO 28741:2013,Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions,Véhicules routiers — Bougies d'allumage et leur logement dans la culasse — Caractéristiques élémentaires et dimensions,2013-10-30,2,['43.060.50'],ISO/TC 22/SC 32,9599,"[44904,55079]",[79008],['en'],27,"ISO 28741:2013 specifies the main properties and dimensions of spark-plugs, including the terminals and the dimensions of their cylinder head housings, for use with spark-ignition engines.
ISO 28741:2013 does not cover screened and waterproof spark-plugs.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2875-1:1973 - **Identifier:** ISO 2875-1:1973 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Part 1: Water spray test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2875:1985 - **Withdrawn / published date:** 1973-10-01 _(verified: appears in the quote below)_ > 7895,IS,,ISO 2875-1:1973,"Packaging — Complete, filled transport packages — Part 1: Water spray test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de résistance aux projections d'eau,1973-10-01,1,['55.180.40'],ISO/TC 122,9599,,[7896],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2875:1985 - **Identifier:** ISO 2875:1985 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Water spray test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2875:2000 - **Withdrawn / published date:** 1985-11-14 _(verified: appears in the quote below)_ > 7896,IS,,ISO 2875:1985,"Packaging — Complete, filled transport packages — Water spray test",Emballages — Emballages d'expédition complets et pleins — Essai de résistance aux projections d'eau,1985-11-14,2,['55.180.40'],ISO/TC 122/SC 3,9599,[7895],[32414],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2876-1:1973 - **Identifier:** ISO 2876-1:1973 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — Part 1: Rolling test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2876:1985 - **Withdrawn / published date:** 1973-07-01 _(verified: appears in the quote below)_ > 7897,IS,,ISO 2876-1:1973,"Packaging — Complete, filled transport packages — Part 1: Rolling test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de roulement,1973-07-01,1,['55.180.40'],ISO/TC 122,9599,,[7898],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28762:2008 - **Identifier:** ISO 28762:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28762:2010 - **Withdrawn / published date:** 2008-10-09 _(verified: appears in the quote below)_ > 44932,IS,,ISO 28762:2008,Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification,Émaux vitrifiés - Revêtements en émail appliqués sur l'acier de surfaces d'écriture - Spécification,2008-10-09,1,['25.220.50'],ISO/TC 107,9599,,[56201],['en'],4,ISO 28762:2008 specifies the requirements for the functional and aesthetic characteristics of vitreous and porcelain enamel coatings applied to plain steel for use as writing surfaces (whiteboards and chalkboards).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28763:2008 - **Identifier:** ISO 28763:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28763:2019 - **Withdrawn / published date:** 2008-10-09 _(verified: appears in the quote below)_ > 44933,IS,,ISO 28763:2008,"Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications",Émaux vitrifiés — Échangeurs thermiques pour réchauffeurs air-gaz et gaz-gaz à empilement de panneaux émaillés remplaçables et démontables — Spécifications,2008-10-09,1,['25.220.50'],ISO/TC 107,9599,,[76419],"['en','fr']",10,"ISO 28763:2008 specifies the minimum requirements and the functional characteristics of enamel coatings applied by any process, such as wet dipping, wet flow-coating, wet spraying, wet electrostatic spraying, wet electrodeposition or dry-powder electrostatic spraying, to profiled steel heat exchanger panels in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28764:2008 - **Identifier:** ISO 28764:2008 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28764:2015 - **Withdrawn / published date:** 2008-10-09 _(verified: appears in the quote below)_ > 44934,IS,,ISO 28764:2008,"Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron","Émaux vitrifiés — Production d'éprouvettes pour l'essai des émaux sur la tôle d'acier, la tôle d'aluminium et la fonte",2008-10-09,1,['25.220.50'],ISO/TC 107,9599,"[7695,1427,22969]",[66381],"['en','fr']",5,
ISO 28764:2008 specifies a method for the production of specimens suitable for testing vitreous and porcelain enamel coatings.
It specifies two different specimens:
ISO 28765:2008 establishes the requirements for the design and use of vitreous-enamel-coated bolted cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges.
It applies to the design of the tank and any associated roof and gives guidan Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28765:2016 - **Identifier:** ISO 28765:2016 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28765:2022 - **Withdrawn / published date:** 2016-01-04 _(verified: appears in the quote below)_ > 66382,IS,,ISO 28765:2016,Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges,Émaux vitrifiés — Conception de réservoirs en acier boulonnés pour le stockage ou le traitement des eaux ou des effluents d'eaux usées urbains ou industriels,2016-01-04,2,['25.220.50'],ISO/TC 107,9599,[44935],[83825],"['en','fr']",24,"
ISO 28765:2016 establishes the requirements for the design and use of vitreous-enamel-coated bolted cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges.
It applies to the design of the tank and any associated roof and gives Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2878:1978 - **Identifier:** ISO 2878:1978 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized — Antistatic and conductive products — Determination of electrical resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2878:1987 - **Withdrawn / published date:** 1978-01-01 _(verified: appears in the quote below)_ > 7901,IS,,ISO 2878:1978,"Rubber, vulcanized — Antistatic and conductive products — Determination of electrical resistance",Caoutchouc vulcanisé — Produits antiélectrostatiques et conducteurs — Détermination de la résistance électrique,1978-01-01,1,['83.060'],ISO/TC 45,9599,,[7902],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2878:1987 - **Identifier:** ISO 2878:1987 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized — Antistatic and conductive products — Determination of electrical resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2878:2005 - **Withdrawn / published date:** 1987-02-12 _(verified: appears in the quote below)_ > 7902,IS,,ISO 2878:1987,"Rubber, vulcanized — Antistatic and conductive products — Determination of electrical resistance",Caoutchouc vulcanisé — Produits antiélectrostatiques et conducteurs — Détermination de la résistance électrique,1987-02-12,2,['83.060'],ISO/TC 45/SC 2,9599,[7901],[39930],"['en','fr']",5,
Elimination or reduction are important in many applications. Charges can be dissipated by suitable leakage paths. Antistatic properties of an article are also influenced by its electrostatic charging characteristics. Only methods involving such leakage paths are considered. Addition of carbon black to a polymer allows to produce wide range of conductivity. Antistatic properties may als Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2878:2005 - **Identifier:** ISO 2878:2005 _(verified: appears in the quote below)_ - **Item title:** Rubber — Antistatic and conductive products — Determination of electrical resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2878:2011 - **Withdrawn / published date:** 2005-06-29 _(verified: appears in the quote below)_ > 39930,IS,,ISO 2878:2005,Rubber — Antistatic and conductive products — Determination of electrical resistance,Caoutchouc vulcanisé — Produits antistatiques et conducteurs — Détermination de la résistance électrique,2005-06-29,3,['83.060'],ISO/TC 45/SC 2,9599,[7902],[53021],"['en','fr']",5,"
ISO 2878:2005 specifies a method of determining the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 times 108 ohms and whose conductivity is derived from the addition of carbon black and/or other appropriate substances to the bulk of the material.
< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2878:2011 - **Identifier:** ISO 2878:2011 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2878:2017 - **Withdrawn / published date:** 2011-09-12 _(verified: appears in the quote below)_ > 53021,IS,,ISO 2878:2011,"Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance",Caoutchouc vulcanisé ou thermoplastique — Produits antistatiques et conducteurs — Détermination de la résistance électrique,2011-09-12,4,['83.060'],ISO/TC 45/SC 2,9599,[39930],[72778],"['en','fr','ru']",8,"ISO 2878:2011 specifies a method of test to determine the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 x 108 ohms and whose conductivity is derived from the addition of carbon black and/or othe Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28801:2011 - **Identifier:** ISO 28801:2011 _(verified: appears in the quote below)_ - **Item title:** Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28592:2017 - **Withdrawn / published date:** 2011-03-14 _(verified: appears in the quote below)_ > 44963,IS,,ISO 28801:2011,"Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)","Plans d'échantillonnage double par attributs, avec taille d'échantillon minimale, indexés par la qualité du risque du fournisseur (QRF) et la qualité du risque du client (QRC)",2011-03-14,1,['03.120.30'],ISO/TC 69/SC 5,9599,,[64625],['en'],70,"
ISO 28801:2011 provides double sampling plans by attributes for the acceptance inspection of lots of discrete items. The plans are indexed by the producer's risk quality (PRQ) and the consumer's risk quality (CRQ) where the nominal producer's and consumer's risks are respectively either Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2881:1977 - **Identifier:** ISO 2881:1977 _(verified: appears in the quote below)_ - **Item title:** Tobacco and tobacco products — Determination of alkaloids in tobacco — Spectrophotometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2881:1992 - **Withdrawn / published date:** 1977-09-01 _(verified: appears in the quote below)_ > 7904,IS,,ISO 2881:1977,Tobacco and tobacco products — Determination of alkaloids in tobacco — Spectrophotometric method,Tabac et produits du tabac — Détermination de la teneur en alcaloïdes dans le tabac — Méthode spectrophotométrique,1977-09-01,2,['65.160'],ISO/TC 126,9599,,[7905],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2884-1:1999 - **Identifier:** ISO 2884-1:1999 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2884-1:2024 - **Withdrawn / published date:** 1999-09-30 _(verified: appears in the quote below)_ > 26991,IS,,ISO 2884-1:1999,Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear,Peintures et vernis — Détermination de la viscosité au moyen de viscosimètres rotatifs — Partie 1: Viscosimètre à cône et plateau fonctionnant à gradient de vitesse de cisaillement élevé,1999-09-30,1,['87.040'],ISO/TC 35/SC 9,9599,[7908],[85307],"['en','fr']",6,"
This part of ISO 2884 is one of a series dealing with the sampling and testing of paints, varnishes and related
products.
It supplements ISO 2431:1993, Paints and varnishes — Determination of flow time by use of flow cups.
It specifies the genera Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2884:1974 - **Identifier:** ISO 2884:1974 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Determination of viscosity at a high rate of shear _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2884-1:1999 - **Withdrawn / published date:** 1974-02-01 _(verified: appears in the quote below)_ > 7908,IS,,ISO 2884:1974,Paints and varnishes — Determination of viscosity at a high rate of shear,Peintures et vernis — Détermination de la viscosité des peintures à gradient de vitesse élevé,1974-02-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[26991],"['en','fr']",2,
Describes a procedure for determining the viscosity of coating materials and related products at a rate of shear not less than 5000 s-1 and not higher than 20000 s-1. When products are being compared the rate of shear shall be approximately the same. The test shall be made at a closely controlled temperature unless otherwise agreed. The value obtained gives information about the resistance of the material to brushing during the initi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2884-2:2003 - **Identifier:** ISO 2884-2:2003 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2884-2:2024 - **Withdrawn / published date:** 2003-03-17 _(verified: appears in the quote below)_ > 31513,IS,,ISO 2884-2:2003,Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed,Peintures et vernis — Détermination de la viscosité au moyen de viscosimètres rotatifs — Partie 2: Viscosimètre à disque ou à bille fonctionnant à vitesse spécifiée,2003-03-17,1,['87.040'],ISO/TC 35/SC 9,9599,,[85308],"['en','fr']",7,"
ISO 2884-2:2003 specifies a general procedure for determining the viscosity of paints, varnishes and related products with a viscosity of up to 34 pascal seconds. It is applicable mainly during production and thinning.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28881:2013 - **Identifier:** ISO 28881:2013 _(verified: appears in the quote below)_ - **Item title:** Machine tools — Safety — Electro-discharge machines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28881:2022 - **Withdrawn / published date:** 2013-07-24 _(verified: appears in the quote below)_ > 45002,IS,,ISO 28881:2013,Machine tools — Safety — Electro-discharge machines,Machines-outils — Sécurité — Machines d'électro-érosion,2013-07-24,1,['25.080.01'],ISO/TC 39/SC 10,9599,,[75901],"['en','fr','ru']",51,"ISO 28881:2013 specifies safety requirements and/or protective measures, applicable to EDM equipment and EDM systems, such as manually controlled EDM die sinking or EDM drilling machines, numerically controlled EDM die sinking or EDM drilling machines and numerically controlled EDM wire cutting machines intended to be adopted by persons undertaking the design, construction, installation and/or supply of such equipment. It also includes information to be provided by the manufactur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28881:2013/Cor 1:2013 - **Identifier:** ISO 28881:2013/Cor 1:2013 _(verified: appears in the quote below)_ - **Item title:** Machine tools — Safety — Electro-discharge machines — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28881:2022 - **Withdrawn / published date:** 2013-09-12 _(verified: appears in the quote below)_ > 64870,IS,Cor,ISO 28881:2013/Cor 1:2013,Machine tools — Safety — Electro-discharge machines — Technical Corrigendum 1,Machines-outils — Sécurité — Machines d'électro-érosion — Rectificatif technique 1,2013-09-12,1,['25.080.01'],ISO/TC 39/SC 10,9599,,[75901],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2889:1975 - **Identifier:** ISO 2889:1975 _(verified: appears in the quote below)_ - **Item title:** General principles for sampling airborne radioactive materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2889:2010 - **Withdrawn / published date:** 1975-05-01 _(verified: appears in the quote below)_ > 7913,IS,,ISO 2889:1975,General principles for sampling airborne radioactive materials,Principes généraux pour le prélèvement des matières radioactives contenues dans l'air,1975-05-01,1,['13.280'],ISO/TC 85/SC 2,9599,,[40347],"['en','fr']",25,"
Sets forth the principles for collecting representative samples and prescribes acceptable methods and materials for gas and particle sampling (collection of the samples, and not their measurement), limited to sampling in installations where work with radioactive materials is conducted, including sampling effluent gases prior to, or at, the point of release to the atmosphere, and with the primary emphasis on the need to protect the radiation worker. D Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2889:2010 - **Identifier:** ISO 2889:2010 _(verified: appears in the quote below)_ - **Item title:** Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2889:2021 - **Withdrawn / published date:** 2010-03-03 _(verified: appears in the quote below)_ > 40347,IS,,ISO 2889:2010,Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities,Échantillonnage des substances radioactives contenues dans l'air dans les conduits et émissaires de rejet des installations nucléaires,2010-03-03,2,['13.280'],ISO/TC 85/SC 2,9599,[7913],[76005],"['en','fr']",103,"
ISO 2889:2010 sets forth performance-based criteria and recommendations for the design and use of systems for sampling of airborne radioactive materials in the effluent air from the ducts and stacks of nuclear facilities.
The requirements and recommendations of ISO 2889:2010 are aimed at sampling that is conducted for regulatory compliance and system control. If e Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2889:2021 - **Identifier:** ISO 2889:2021 _(verified: appears in the quote below)_ - **Item title:** Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2889:2023 - **Withdrawn / published date:** 2021-08-30 _(verified: appears in the quote below)_ > 76005,IS,,ISO 2889:2021,Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities,Échantillonnage de substances radioactives en suspension dans l'air dans les émissaires de rejet et les conduits des installations nucléaires,2021-08-30,3,['13.280'],ISO/TC 85/SC 2,9599,[40347],[85248],"['en','fr']",115,"
This document sets forth performance-based criteria and recommendations for the design and use of systems for sampling of airborne radioactive materials in the effluent air from the ducts and stacks of nuclear facilities.
The requirements and recommendations of this document are aimed at sampling that is conducted for regulatory compliance and system contr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 289-1:1994 - **Identifier:** ISO 289-1:1994 _(verified: appears in the quote below)_ - **Item title:** Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 289-1:2005 - **Withdrawn / published date:** 1994-06-23 _(verified: appears in the quote below)_ > 4211,IS,,ISO 289-1:1994,"Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity",Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 1: Détermination de l'indice consistométrique Mooney,1994-06-23,1,['83.060'],ISO/TC 45/SC 2,9599,[4209],[41621],"['en','fr']",9,
Applies to uncompounded or compounded rubbers. The torque which has to be applied under specified conditions in order to rotate a metal disc in a cylindrical chamber formed from mating dies filled with rubber is measured. The resistance offered by the rubber to this rotation is expressed in arbitrary units as the Mooney vis Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 289-1:2005 - **Identifier:** ISO 289-1:2005 _(verified: appears in the quote below)_ - **Item title:** Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 289-1:2014 - **Withdrawn / published date:** 2005-10-05 _(verified: appears in the quote below)_ > 41621,IS,,ISO 289-1:2005,"Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity",Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 1: Détermination de l'indice consistométrique Mooney,2005-10-05,2,['83.060'],ISO/TC 45/SC 2,9599,[4211],[62094],"['en','fr']",11,"
ISO 289-1:2005 specifies a method, using a shearing-disc viscometer, for measuring the Mooney viscosity of uncompounded or compounded rubbers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 289-1:2005/Cor 1:2009 - **Identifier:** ISO 289-1:2005/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 289-1:2014 - **Withdrawn / published date:** 2009-01-15 _(verified: appears in the quote below)_ > 53496,IS,Cor,ISO 289-1:2005/Cor 1:2009,"Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity — Technical Corrigendum 1",Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 1: Détermination de l'indice consistométrique Mooney — Rectificatif technique 1,2009-01-15,2,['83.060'],ISO/TC 45/SC 2,9599,,[62094],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 289-1:2014 - **Identifier:** ISO 289-1:2014 _(verified: appears in the quote below)_ - **Item title:** Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 289-1:2015 - **Withdrawn / published date:** 2014-02-03 _(verified: appears in the quote below)_ > 62094,IS,,ISO 289-1:2014,"Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity",Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 1: Détermination de l'indice consistométrique Mooney,2014-02-03,3,['83.060'],ISO/TC 45/SC 2,9599,"[53496,41621]",[68108],"['en','fr','ru']",17,"ISO 289-1:2014 specifies a method, using a shearing-disc viscometer, for measuring the Mooney viscosity of uncompounded or compounded rubbers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 289:1985 - **Identifier:** ISO 289:1985 _(verified: appears in the quote below)_ - **Item title:** Rubber, unvulcanized — Determination of Mooney viscosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 289-1:1994 - **Withdrawn / published date:** 1985-04-04 _(verified: appears in the quote below)_ > 4209,IS,,ISO 289:1985,"Rubber, unvulcanized — Determination of Mooney viscosity",Caoutchouc non vulcanisé — Détermination de la viscosité Mooney,1985-04-04,1,['83.060'],ISO/TC 45/SC 2,9599,,[4211],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 289-2:1994 - **Identifier:** ISO 289-2:1994 _(verified: appears in the quote below)_ - **Item title:** Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 289-2:2016 - **Withdrawn / published date:** 1994-06-23 _(verified: appears in the quote below)_ > 4213,IS,,ISO 289-2:1994,"Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics",Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 2: Détermination des caractéristiques de prévulcanisation,1994-06-23,1,['83.060'],ISO/TC 45/SC 2,9599,[4828],[68109],"['en','fr']",3,The test consists of determining how the Mooney viscosity of the rubber compound changes with running time at a specified temperature relevant to the process for which the compound is to be used. The time at which the Mooney viscosity has increased by a specified number of units is recorded. The pre-vu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 289-2:2016 - **Identifier:** ISO 289-2:2016 _(verified: appears in the quote below)_ - **Item title:** Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 289-2:2020 - **Withdrawn / published date:** 2016-02-18 _(verified: appears in the quote below)_ > 68109,IS,,ISO 289-2:2016,"Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics",Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 2: Détermination des caractéristiques de prévulcanisation,2016-02-18,2,['83.060'],ISO/TC 45/SC 2,9599,[4213],[77428],"['en','fr']",8,
ISO 289-2:2016 specifies a method for determining the pre-vulcanization characteristics of compounded rubber.
The pre-vulcanization characteristics determined by this method provide a means of estimating how long compounded rubber can be maintained at high temperatures and remain processable.
29022,IS,,ISO 289-3:1999,"Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR","Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 3: Détermination de la valeur Delta Mooney pour le caoutchouc styrène-butadiène polymérisé en émulsion, étendu à l'huile, non pigmenté",1999-11-25,1,['83.060'],ISO/TC 45/SC 2,9599,,[68110],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 289-4:2003 - **Identifier:** ISO 289-4:2003 _(verified: appears in the quote below)_ - **Item title:** Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 289-4:2017 - **Withdrawn / published date:** 2003-10-20 _(verified: appears in the quote below)_ > 37082,IS,,ISO 289-4:2003,"Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate",Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 4: Détermination du taux de relaxation de contrainte Mooney,2003-10-20,1,['83.060'],ISO/TC 45/SC 2,9599,,[65925],"['en','fr']",10,"ISO 289-4:2003 specifies a method of use of a shearing-disc viscometer for measuring the Mooney stress-relaxation rate (MSR) of uncompounded or compounded unvulcanized rubbers, characterizing the elastic response of those materials next to the viscous response as measured by the Mooney viscosity.
" 3 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2892:1973 - **Identifier:** ISO 2892:1973 _(verified: appears in the quote below)_ - **Item title:** Austenitic cast iron _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2892:2007 - **Withdrawn / published date:** 1973-09-01 _(verified: appears in the quote below)_ > 7916,IS,,ISO 2892:1973,Austenitic cast iron,Fonte austénitique,1973-09-01,1,['77.080.10'],ISO/TC 25,9599,,[34783],"['en','fr']",9,"Relates to nine grades of flake graphite austenitic cast iron and eleven grades of spheroidal or nodular graphite austenitic cast iron intended for subsequent use in the manufacture of castings. These grades of material are based on chemical composition and mechanical properties. Specifies symbols, production, properties and applications, sampling, test samples, testing and retests. An informative annex gives supplementary data on mechanical and physical properties and typical applications.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28921-1:2013 - **Identifier:** ISO 28921-1:2013 _(verified: appears in the quote below)_ - **Item title:** Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28921-1:2022 - **Withdrawn / published date:** 2013-04-24 _(verified: appears in the quote below)_ > 59734,IS,,ISO 28921-1:2013,"Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing","Robinetterie industrielle — Robinets d'isolement pour application à basses températures — Partie 1: Conception, essais de fabrication et de production",2013-04-24,1,['23.060.01'],ISO/TC 153,9599,,[78445],"['en','fr']",23,"ISO 28921-1:2013 specifies requirements for design, dimensions, material, fabrication and production testing of isolation valves for low-temperature applications. It applies to gate, globe, check, butterfly and ball valves and can be used for other valve types used in low-temperature services.
ISO 28921-1:2013 co Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28927-1:2009 - **Identifier:** ISO 28927-1:2009 _(verified: appears in the quote below)_ - **Item title:** Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28927-1:2019 - **Withdrawn / published date:** 2009-12-11 _(verified: appears in the quote below)_ > 40798,IS,,ISO 28927-1:2009,Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders,Machines à moteur portatives — Méthodes d'essai pour l'évaluation de l'émission de vibrations — Partie 1: Meuleuses verticales et meuleuses d'angles,2009-12-11,1,"['25.140.10','13.160']",ISO/TC 118/SC 3,9599,[16045],[78207],"['en','fr']",26,"
ISO 28927-1:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test whee Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28927-1:2009/Amd 1:2017 - **Identifier:** ISO 28927-1:2009/Amd 1:2017 _(verified: appears in the quote below)_ - **Item title:** Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders — Amendment 1: Cupped wire brushes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28927-1:2019 - **Withdrawn / published date:** 2017-04-12 _(verified: appears in the quote below)_ > 68218,IS,Amd,ISO 28927-1:2009/Amd 1:2017,Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders — Amendment 1: Cupped wire brushes,Machines à moteur portatives — Méthodes d'essai pour l'évaluation de l'émission de vibrations — Partie 1: Meuleuses verticales et meuleuses d'angles — Amendement 1: Brosses métalliques creuses,2017-04-12,1,"['25.140.10','13.160']",ISO/TC 118/SC 3,9599,,[78207],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2894:1980 - **Identifier:** ISO 2894:1980 _(verified: appears in the quote below)_ - **Item title:** Embossed credit cards — Specifications, numbering system and registration procedure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7811-3:1985 | ISO/IEC 7813:1990 | ISO 7811-5:1985 | ISO 7811-1:1985 | ISO 7810:1985 | ISO 7811-2:1985 | ISO 7811-4:1985 - **Withdrawn / published date:** 1980-12-01 _(verified: appears in the quote below)_ > 7917,IS,,ISO 2894:1980,"Embossed credit cards — Specifications, numbering system and registration procedure","Cartes de crédit estampées — Spécifications, système de numérotation et procédure d'enregistrement",1980-12-01,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[14720,14730,14724,14716,14714,14718,14722]",['en'],32, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28941-1:2008 - **Identifier:** ISO 28941-1:2008 _(verified: appears in the quote below)_ - **Item title:** Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 20557-1:2018 - **Withdrawn / published date:** 2008-12-02 _(verified: appears in the quote below)_ > 41627,IS,,ISO 28941-1:2008,Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de poly(phénylène éther) (PPE) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2008-12-02,1,['83.080.20'],ISO/TC 61/SC 9,9599,[25975],[68365],"['en','fr']",9,"
ISO 28941-1:2008 establishes a system of designation for PPE thermoplastic materials, which may be used as the basis for specifications.
The types of PPE plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties
Specifies a method for the determination of the water absorption of rigid cellular plastics by measuring the change in the buoyant force resulting from immersion of a specimen in water for 4 days. Corrections are specified to take account of any change in volume of the specimen and also tocorrect for the volume of water in the cut surface cells of the specimen. Water absorption is expessed as an average percentage increase over the orginal volume of the specimen Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2897-1:1990 - **Identifier:** ISO 2897-1:1990 _(verified: appears in the quote below)_ - **Item title:** Plastics — Impact-resistant polystyrene (SB) moulding and extrusion materials — Part 1: Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2897-1:1997 - **Withdrawn / published date:** 1990-09-27 _(verified: appears in the quote below)_ > 7922,IS,,ISO 2897-1:1990,Plastics — Impact-resistant polystyrene (SB) moulding and extrusion materials — Part 1: Designation,Plastiques — Polystyrène (SB) résistant au choc pour moulage et extrusion — Partie 1: Désignation,1990-09-27,1,['83.080.20'],ISO/TC 61/SC 9,9599,[7921],[26807],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2897-1:1997 - **Identifier:** ISO 2897-1:1997 _(verified: appears in the quote below)_ - **Item title:** Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19063-1:2015 - **Withdrawn / published date:** 1997-07-03 _(verified: appears in the quote below)_ > 26807,IS,,ISO 2897-1:1997,Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polystyrènes résistants au choc (PS-I) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1997-07-03,2,['83.080.20'],ISO/TC 61/SC 9,9599,[7922],[63847],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2897:1976 - **Identifier:** ISO 2897:1976 _(verified: appears in the quote below)_ - **Item title:** Plastics — Designation of impact-resistant polystyrenes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2897-1:1990 | ISO 2897-2:1981 - **Withdrawn / published date:** 1976-01-01 _(verified: appears in the quote below)_ > 7921,IS,,ISO 2897:1976,Plastics — Designation of impact-resistant polystyrenes,Matières plastiques — Désignation des polystyrènes résistants au choc,1976-01-01,1,['83.080.20'],ISO/TC 61,9599,,"[7922,7923]",['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2897-2:1981 - **Identifier:** ISO 2897-2:1981 _(verified: appears in the quote below)_ - **Item title:** Plastics — Impact-resistant polystyrenes — Part 2: Determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2897-2:1994 - **Withdrawn / published date:** 1981-07-01 _(verified: appears in the quote below)_ > 7923,IS,,ISO 2897-2:1981,Plastics — Impact-resistant polystyrenes — Part 2: Determination of properties,Plastiques — Polystyrènes résistant au choc — Partie 2: Détermination des caractéristiques,1981-07-01,1,['83.080.20'],ISO/TC 61,9599,[7921],[7924],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2897-2:1994 - **Identifier:** ISO 2897-2:1994 _(verified: appears in the quote below)_ - **Item title:** Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2897-2:2003 - **Withdrawn / published date:** 1994-10-20 _(verified: appears in the quote below)_ > 7924,IS,,ISO 2897-2:1994,Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polystyrènes résistants au choc (PS-I) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1994-10-20,2,['83.080.20'],ISO/TC 61/SC 9,9599,[7923],[33334],"['en','fr']",5,
Cancels and replaces the first edition (1981). Lays down the methods of preparation of test specimens and the test methods to be used in determining the properties of PS-I moulding and extrusion materials. Gives requirements for handling test material and for conditioning both the test mater Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2897-2:1994/Cor 1:1995 - **Identifier:** ISO 2897-2:1994/Cor 1:1995 _(verified: appears in the quote below)_ - **Item title:** Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2897-2:2003 - **Withdrawn / published date:** 1995-03-23 _(verified: appears in the quote below)_ > 25715,IS,Cor,ISO 2897-2:1994/Cor 1:1995,Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Technical Corrigendum 1,Plastiques — Polystyrènes résistants au choc (PS-I) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés — Rectificatif technique 1,1995-03-23,2,['83.080.20'],ISO/TC 61/SC 9,9599,,[33334],"['en','fr']",1,
Replaces in the last column of table 3 '220 °C' by '200 °C'.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2897-2:2003 - **Identifier:** ISO 2897-2:2003 _(verified: appears in the quote below)_ - **Item title:** Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19063-2:2020 - **Withdrawn / published date:** 2003-11-28 _(verified: appears in the quote below)_ > 33334,IS,,ISO 2897-2:2003,Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polystyrènes résistants au choc (PS-I) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2003-11-28,3,['83.080.20'],ISO/TC 61/SC 9,9599,"[25715,7924]",[77538],"['en','fr']",5,"ISO 2897-2:2003 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PS-I moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2898-1:1980 - **Identifier:** ISO 2898-1:1980 _(verified: appears in the quote below)_ - **Item title:** Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2898-1:1986 - **Withdrawn / published date:** 1980-03-01 _(verified: appears in the quote below)_ > 7925,IS,,ISO 2898-1:1980,Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation,Plastiques — Compositions plastifiées d'homopolymères et copolymères de chlorure de vinyle — Partie 1: Désignation,1980-03-01,1,['83.080.20'],ISO/TC 61,9599,,[7926],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2898-1:1986 - **Identifier:** ISO 2898-1:1986 _(verified: appears in the quote below)_ - **Item title:** Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) — Part 1: Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2898-1:1996 - **Withdrawn / published date:** 1986-08-14 _(verified: appears in the quote below)_ > 7926,IS,,ISO 2898-1:1986,Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) — Part 1: Designation,Plastiques — Compositions plastifiées d'homopolymères et de copolymères de chlorure de vinyle (PVC-P) — Partie 1: Désignation,1986-08-14,2,['83.080.20'],ISO/TC 61/SC 9,9599,[7925],[20474],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2898-1:1996 - **Identifier:** ISO 2898-1:1996 _(verified: appears in the quote below)_ - **Item title:** Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 24023-1:2020 - **Withdrawn / published date:** 1996-08-15 _(verified: appears in the quote below)_ > 20474,IS,,ISO 2898-1:1996,Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de poly(chlorure de vinyle) plastifié (PVC-P) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1996-08-15,3,['83.080.20'],ISO/TC 61/SC 9,9599,[7926],[77541],"['en','fr']",5,"
Establishes a system of designation for plasticized poly(vinyl chloride) (PVC-P) which may be used as the basis for specifications. PVC-P plastics are differentiated by a classification system based on appropriate levels of properties such as Shore hardness, density and torsional-stiffn Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2898-2:1980 - **Identifier:** ISO 2898-2:1980 _(verified: appears in the quote below)_ - **Item title:** Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2898-2:1989 - **Withdrawn / published date:** 1980-03-01 _(verified: appears in the quote below)_ > 7927,IS,,ISO 2898-2:1980,Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties,Plastiques — Compositions plastifiées d'homopolymères et copolymères de chlorure de vinyle — Partie 2: Détermination des propriétés,1980-03-01,1,['83.080.20'],ISO/TC 61,9599,,[7928],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2898-2:1989 - **Identifier:** ISO 2898-2:1989 _(verified: appears in the quote below)_ - **Item title:** Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2898-2:1997 - **Withdrawn / published date:** 1989-10-26 _(verified: appears in the quote below)_ > 7928,IS,,ISO 2898-2:1989,Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) — Part 2: Preparation of test specimens and determination of properties,Plastiques — Compositions plastifiées d'homopolymères et de copolymères de chlorure de vinyle (PVC-P) — Partie 2: Préparation des éprouvettes et détermination des caractéristiques,1989-10-26,2,['83.080.20'],ISO/TC 61/SC 9,9599,[7927],[25201],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2898-2:1997 - **Identifier:** ISO 2898-2:1997 _(verified: appears in the quote below)_ - **Item title:** Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2898-2:2008 - **Withdrawn / published date:** 1997-07-10 _(verified: appears in the quote below)_ > 25201,IS,,ISO 2898-2:1997,Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux à base de poly(chlorure de vinyle) plastifié (PVC-P) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1997-07-10,3,['83.080.20'],ISO/TC 61/SC 9,9599,[7928],[50605],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2898-2:2008 - **Identifier:** ISO 2898-2:2008 _(verified: appears in the quote below)_ - **Item title:** Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 24023-2:2020 - **Withdrawn / published date:** 2008-10-29 _(verified: appears in the quote below)_ > 50605,IS,,ISO 2898-2:2008,Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux à base de poly(chlorure de vinyle) plastifié (PVC-P) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2008-10-29,4,['83.080.20'],ISO/TC 61/SC 9,9599,[25201],[77542],"['en','fr']",6,"
ISO 2898-2:2898 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PVC-P moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2901:1977 - **Identifier:** ISO 2901:1977 _(verified: appears in the quote below)_ - **Item title:** ISO metric trapezoidal screw threads — Basic profile and maximum material profiles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2901:1993 - **Withdrawn / published date:** 1977-10-01 _(verified: appears in the quote below)_ > 7932,IS,,ISO 2901:1977,ISO metric trapezoidal screw threads — Basic profile and maximum material profiles,Filetages métriques trapézoïdaux ISO — Profil de base et profils à maximum de matière,1977-10-01,1,['21.040.10'],ISO/TC 1,9599,,[7933],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2901:1993 - **Identifier:** ISO 2901:1993 _(verified: appears in the quote below)_ - **Item title:** ISO metric trapezoidal screw threads — Basic profile and maximum material profiles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2901:2016 - **Withdrawn / published date:** 1993-10-14 _(verified: appears in the quote below)_ > 7933,IS,,ISO 2901:1993,ISO metric trapezoidal screw threads — Basic profile and maximum material profiles,Filetages métriques trapézoïdaux ISO — Profil de base et profils à maximum de matière,1993-10-14,2,['21.040.10'],ISO/TC 1,9599,[7932],[68337],"['en','fr']",5,"
Specifies the theoretical profile associated with the basic sizes of the major, pitch and minor diameters of the thread; the deviations are applied to these basic sizes; contains tabels and figures with metric dimensions.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2902:1977 - **Identifier:** ISO 2902:1977 _(verified: appears in the quote below)_ - **Item title:** ISO metric trapezoidal screw threads — General plan _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2902:2016 | ISO/CD 2902 - **Withdrawn / published date:** 1977-10-01 _(verified: appears in the quote below)_ > 7935,IS,,ISO 2902:1977,ISO metric trapezoidal screw threads — General plan,Filetages métriques trapézoïdaux ISO — Vue d'ensemble,1977-10-01,1,['21.040.10'],ISO/TC 1,9599,,"[70093,7934]","['en','fr']",2,Specifies a series of diameter and pitch combinations for threads having the basic profile according to ISO 2901; tabulates nominal diameters from 8 mm up to and including 300 mm together with the associated pitches ranging from 1.5 to 44.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2903:1977 - **Identifier:** ISO 2903:1977 _(verified: appears in the quote below)_ - **Item title:** ISO metric trapezoidal screw threads — Tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 2903 | ISO 2903:1993 - **Withdrawn / published date:** 1977-10-01 _(verified: appears in the quote below)_ > 7937,IS,,ISO 2903:1977,ISO metric trapezoidal screw threads — Tolerances,Filetages métriques trapézoïdaux ISO — Tolérances,1977-10-01,1,['21.040.10'],ISO/TC 1,9599,,"[7936,7938]","['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2903:1993 - **Identifier:** ISO 2903:1993 _(verified: appears in the quote below)_ - **Item title:** ISO metric trapezoidal screw threads — Tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2903:2016 - **Withdrawn / published date:** 1993-10-28 _(verified: appears in the quote below)_ > 7938,IS,,ISO 2903:1993,ISO metric trapezoidal screw threads — Tolerances,Filetages métriques trapézoïdaux ISO — Tolérances,1993-10-28,2,['21.040.10'],ISO/TC 1,9599,[7937],[68336],"['en','fr']",10,"Specifies a tolerance system for threads according to ISO 2902; the system does not apply to threads with special requirements on axial displacement (e.g. lead screws); gives the structure of the system and tabulates pitches from 1.5 up to and including 44, comprises basic major diameters over 5.6 mm up to and including 355 mm; includes recommended tolerance classes for bolt and nut threads.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2904:1977 - **Identifier:** ISO 2904:1977 _(verified: appears in the quote below)_ - **Item title:** ISO metric trapezoidal screw threads — Basic dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2904:2020 | ISO/CD 2912 | ISO/CD 2904 - **Withdrawn / published date:** 1977-10-01 _(verified: appears in the quote below)_ > 7940,IS,,ISO 2904:1977,ISO metric trapezoidal screw threads — Basic dimensions,Filetages métriques trapézoïdaux ISO — Dimensions de base,1977-10-01,1,['21.040.10'],ISO/TC 1,9599,,"[78729,7953,7939]","['en','fr']",6,"Specifies the dimensions for threads according to ISO 2902; the values refer to the basic profiles according to ISO 2901; shows the formulae for calculations; tabulates nominal diameters from 8 mm up to and including 300 mm with pitches from 1.5 to 44 together with the associated pitch, major and minor diameters.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2905:1974 - **Identifier:** ISO 2905:1974 _(verified: appears in the quote below)_ - **Item title:** Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2905:1985 - **Withdrawn / published date:** 1974-12-01 _(verified: appears in the quote below)_ > 7941,IS,,ISO 2905:1974,Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads,Éléments standard pour la construction des machines-outils — Nez de broches et douilles de réglage pour têtes multibroches,1974-12-01,1,['25.060.10'],ISO/TC 39,9599,,[7942],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2906:1972 - **Identifier:** ISO 2906:1972 _(verified: appears in the quote below)_ - **Item title:** Cinematography — 35 mm motion-picture film — Image area produced by camera aperture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2906:1984 - **Withdrawn / published date:** 1972-12-01 _(verified: appears in the quote below)_ > 7943,IS,,ISO 2906:1972,Cinematography — 35 mm motion-picture film — Image area produced by camera aperture,Cinématographie — Film cinématographique de 35 mm — Champ d'image enregistré par la fenêtre de la caméra,1972-12-01,1,['37.060.20'],ISO/TC 36,9599,,[7944],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2906:1984 - **Identifier:** ISO 2906:1984 _(verified: appears in the quote below)_ - **Item title:** Cinematography — Image area produced by camera aperture on 35 mm motion-picture film — Position and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2906:2002 - **Withdrawn / published date:** 1984-05-01 _(verified: appears in the quote below)_ > 7944,IS,,ISO 2906:1984,Cinematography — Image area produced by camera aperture on 35 mm motion-picture film — Position and dimensions,Cinématographie — Surface d'image délimitée par la fenêtre de la caméra sur les films cinématographiques 35 mm — Position et dimensions,1984-05-01,2,['37.060.20'],ISO/TC 36,9599,"[7943,3713]",[30126],"['en','fr']",3,"Specifies the position and dimensions of the image area produced by a camera aperture on 35 mm motion-picture film for rectilinear (non-anamorphic) and anamorphic pictures having a lateral compression ratio of 2:1 and an aspect ratio of 2,35:1. In addition, recommendations are given for the perforations serving the positioning of the film in th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 29061-1:2010 - **Identifier:** ISO 29061-1:2010 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 1: Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 29061-1:2026 - **Withdrawn / published date:** 2010-11-30 _(verified: appears in the quote below)_ > 52640,IS,,ISO 29061-1:2010,Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 1: Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments,"Véhicules routiers — Méthodes et critères pour l'évaluation de la facilité d'utilisation des systèmes de retenue pour enfants, et leurs interfaces avec les systèmes d'ancrage dans le véhicule — Partie 1: Véhicules et systèmes de retenue pour enfants équipés d'ancrages et d'attaches ISOFIX",2010-11-30,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[80301],['en'],21,"
ISO 29061-1:2011 provides criteria for the judgement of usability of child Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 29061-3:2017 - **Identifier:** ISO 29061-3:2017 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 3: Installation of child restraint systems using vehicle seat belts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 29061-3:2026 - **Withdrawn / published date:** 2017-12-01 _(verified: appears in the quote below)_ > 64042,IS,,ISO 29061-3:2017,Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 3: Installation of child restraint systems using vehicle seat belts,Véhicules routiers — Méthodes et critères pour l'évaluation de la facilité d'utilisation des systèmes de retenue enfants et leurs interfaces avec les systèmes d'ancrage dans le véhicule — Partie 3: Installation des systèmes de retenue pour enfant utilisant les ceintures de sécurité,2017-12-01,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[83099],['en'],19,
ISO 29061-3:2017 specifies the criteria for judgement of usability of child restraint systems (CRS) when Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 29061-4:2017 - **Identifier:** ISO 29061-4:2017 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 4: Securing of child in child restraint system and daily handling aspects _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 29061-4:2026 - **Withdrawn / published date:** 2017-12-01 _(verified: appears in the quote below)_ > 64043,IS,,ISO 29061-4:2017,Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 4: Securing of child in child restraint system and daily handling aspects,"Véhicules routiers — Méthodes et critères pour l'évaluation de la facilité d'utilisation des systèmes de retenue enfants et leurs interfaces avec les systèmes d'ancrage dans le véhicule — Partie 4: Sécuriser l'enfant dans les systèmes de retenue pour enfant, et aspects de manipulation quotidienne",2017-12-01,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[83100],['en'],15,"
ISO 29061-4:2017 provides criteria for judgement of usability of child restraint Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 29061-5:2017 - **Identifier:** ISO 29061-5:2017 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 5: Installation and securing of child in a booster system _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 29061-5:2026 - **Withdrawn / published date:** 2017-12-01 _(verified: appears in the quote below)_ > 64044,IS,,ISO 29061-5:2017,Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 5: Installation and securing of child in a booster system,"Véhicules routiers — Méthodes et critères pour l'évaluation de la facilité d'utilisation des systèmes de retenue pour enfants, et leurs interfaces avec les systèmes d'ancrage dans le véhicule — Partie 5: Installation et fixation d'un enfant dans un système de réhausseur",2017-12-01,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[83101],['en'],18,"
ISO 29061-5:2017 provides criteria for judgement of usability of booster seat child restraint systems (CRS) when installing Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2907:1972 - **Identifier:** ISO 2907:1972 _(verified: appears in the quote below)_ - **Item title:** Cinematography — 35 mm motion-picture film — Projectable image area _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2907:1984 - **Withdrawn / published date:** 1972-12-01 _(verified: appears in the quote below)_ > 7945,IS,,ISO 2907:1972,Cinematography — 35 mm motion-picture film — Projectable image area,Cinématographie — Film cinématographique de 35 mm — Champ d'image projetable,1972-12-01,1,['37.060.20'],ISO/TC 36,9599,,[7946],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2907:1984 - **Identifier:** ISO 2907:1984 _(verified: appears in the quote below)_ - **Item title:** Cinematography — Maximum projectable image area on 35 mm motion-picture film — Position and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2907:2002 - **Withdrawn / published date:** 1984-05-01 _(verified: appears in the quote below)_ > 7946,IS,,ISO 2907:1984,Cinematography — Maximum projectable image area on 35 mm motion-picture film — Position and dimensions,Cinématographie — Surface maximale projetable pour une image sur film cinématographique 35 mm — Position et dimensions,1984-05-01,2,['37.060.20'],ISO/TC 36,9599,"[3713,7945]",[25425],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2908:1974 - **Identifier:** ISO 2908:1974 _(verified: appears in the quote below)_ - **Item title:** Petroleum waxes — Determination of oil content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 2908 - **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_ > 7947,IS,,ISO 2908:1974,Petroleum waxes — Determination of oil content,Cires de pétrole — Détermination de la teneur en huile,1974-08-01,1,['75.140'],ISO/TC 28,9599,,[29952],"['en','fr']",9,"
Includes a test procedure for products having a congealing point of 30 °C or higher and containing not more than 15 % of oil. This content may have significant effects on several of its properties, such as strength, hardness, flexibility, scuff resistance, coefficient of friction, coefficient of expansion, melting point, and oil staining.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2909:1981 - **Identifier:** ISO 2909:1981 _(verified: appears in the quote below)_ - **Item title:** Petroleum products — Calculation of viscosity index from kinematic viscosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2909:2002 - **Withdrawn / published date:** 1981-09-01 _(verified: appears in the quote below)_ > 7948,IS,,ISO 2909:1981,Petroleum products — Calculation of viscosity index from kinematic viscosity,Produits pétroliers — Calcul de l'indice de viscosité à partir de la viscosité cinématique,1981-09-01,2,['75.080'],ISO/TC 28,9599,,[29953],"['en','fr']",6,"Specifies two procedures at 40 °C and 100 °C. Procedure A is applicable to viscosity indices up to and including 100, procedure B to viscosity indices 100 and greater. The table given applies to kinematic viscosities between 2 and 70 mm /s at 100 C. The values are determined with reference to a value of 1,003 8 mm /s at 20,00 °C for distilled water.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 291:1977 - **Identifier:** ISO 291:1977 _(verified: appears in the quote below)_ - **Item title:** Plastics — Standard atmospheres for conditioning and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 291:1997 - **Withdrawn / published date:** 1977-12-01 _(verified: appears in the quote below)_ > 4215,IS,,ISO 291:1977,Plastics — Standard atmospheres for conditioning and testing,Plastiques — Atmosphères normales de conditionnement et d'essai,1977-12-01,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[25543],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 291:1997 - **Identifier:** ISO 291:1997 _(verified: appears in the quote below)_ - **Item title:** Plastics — Standard atmospheres for conditioning and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 291:2005 - **Withdrawn / published date:** 1997-07-24 _(verified: appears in the quote below)_ > 25543,IS,,ISO 291:1997,Plastics — Standard atmospheres for conditioning and testing,Plastiques — Atmosphères normales de conditionnement et d'essai,1997-07-24,2,['83.080.01'],ISO/TC 61/SC 6,9599,[4215],[38242],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 291:1997/Cor 1:1998 - **Identifier:** ISO 291:1997/Cor 1:1998 _(verified: appears in the quote below)_ - **Item title:** Plastics — Standard atmospheres for conditioning and testing — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 291:2005 - **Withdrawn / published date:** 1998-02-26 _(verified: appears in the quote below)_ > 30108,IS,Cor,ISO 291:1997/Cor 1:1998,Plastics — Standard atmospheres for conditioning and testing — Technical Corrigendum 1,Plastiques — Atmosphères normales de conditionnement et d'essai — Rectificatif technique 1,1998-02-26,2,['83.080.01'],ISO/TC 61/SC 6,9599,,[38242],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 291:2005 - **Identifier:** ISO 291:2005 _(verified: appears in the quote below)_ - **Item title:** Plastics — Standard atmospheres for conditioning and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 291:2008 - **Withdrawn / published date:** 2005-11-17 _(verified: appears in the quote below)_ > 38242,IS,,ISO 291:2005,Plastics — Standard atmospheres for conditioning and testing,Plastiques — Atmosphères normales de conditionnement et d'essai,2005-11-17,3,['83.080.01'],ISO/TC 61/SC 6,9599,"[25543,30108]",[50572],"['en','fr']",8,ISO 291:2005 sets out specifications relating to the conditioning and testing of all plastics and all types of test specimen at constant atmospheric conditions.
Special atmospheres applicable to a particular test or material or simulating a particular climatic environment are not included.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2910:1974 - **Identifier:** ISO 2910:1974 _(verified: appears in the quote below)_ - **Item title:** Cinematography — Screen luminance for the projection of motion-picture films in indoor theatres _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2910:1990 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 7949,IS,,ISO 2910:1974,Cinematography — Screen luminance for the projection of motion-picture films in indoor theatres,Cinématographie — Luminance des écrans de projection dans les salles d'exploitation,1974-11-01,1,['37.060.10'],ISO/TC 36,9599,,[7950],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2910:1990 - **Identifier:** ISO 2910:1990 _(verified: appears in the quote below)_ - **Item title:** Cinematography — Screen luminance for the projection of motion-picture prints in indoor theatres and review rooms _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2910:2007 | ISO/WD 2910 - **Withdrawn / published date:** 1990-07-12 _(verified: appears in the quote below)_ > 7950,IS,,ISO 2910:1990,Cinematography — Screen luminance for the projection of motion-picture prints in indoor theatres and review rooms,Cinématographie — Luminance des écrans de projection des copies cinématographiques dans les salles d'exploitation et les salles de vision,1990-07-12,2,['37.060.10'],ISO/TC 36,9599,"[7949,7918]","[39968,28542]","['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 93](https://referencesource.org/iso-standard-supersessions/p/93/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 95](https://referencesource.org/iso-standard-supersessions/p/95/) Last verified: 2026-08-05. Review by: 2027-02-02.