Contains some amendments intended to improve the repeatability and reproducibility of specular-gloss measurements.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28139:2009 - **Identifier:** ISO 28139:2009 _(verified: appears in the quote below)_ - **Item title:** Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28139:2019 - **Withdrawn / published date:** 2009-09-07 _(verified: appears in the quote below)_ > 44519,IS,,ISO 28139:2009,Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements,Matériel agricole et forestier — Nébulisateurs portés à dos à moteur à combustion interne — Exigences de sécurité,2009-09-07,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[67563],"['en','fr']",17,"ISO 28139:2009 specifies safety requirements and their verification for the design and construction of knapsack mistblowers incorporating a combustion engine where the air flow is generated by a fan. It describes methods for the elimination or reduction of hazards arising from their use. In addition, it specifies the type of information on safe working practices to be provide Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2815:1973 - **Identifier:** ISO 2815:1973 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Buchholz indentation test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2815:2003 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 7812,IS,,ISO 2815:1973,Paints and varnishes — Buchholz indentation test,Peintures et vernis — Essais d'indentation Buchholz,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[30979],"['en','fr']",5,"
Specifies a method for the indentation test under well-defined conditions on a single coating or multicoat system of coating materials or related products. It shall used a specified instrument (Buchholz). The length of the indentation is indicative of the residual deformation of the paint film. The result is expressed as a function of the reciprocal of the indentation length. The test gives results which may be dependent upon time, temperature and humidity. The indentation depth depends upon the fi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28158:2010 - **Identifier:** ISO 28158:2010 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Integrated dental floss and handles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28158:2018 - **Withdrawn / published date:** 2010-06-18 _(verified: appears in the quote below)_ > 44521,IS,,ISO 28158:2010,Dentistry — Integrated dental floss and handles,Médecine bucco-dentaire — Porte-fil et fil dentaire intégré,2010-06-18,1,['97.170'],ISO/TC 106/SC 7,9599,,[69904],"['en','fr']",7,"
ISO 28158:2010 is applicable to integrated dental floss and handles for manual use. It does not include dental floss and handles which contain a continuous supply of dental floss, or dental floss and handles to which the floss is subsequently added.
ISO 28158:2010 does not specify specific qualitative and quantitative test methods for demonstrating freedom from unacceptable biological risks.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2816:1973 - **Identifier:** ISO 2816:1973 _(verified: appears in the quote below)_ - **Item title:** Fundamental characteristics of a system of shoe sizing to be known as Mondopoint _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9407:1991 - **Withdrawn / published date:** 1973-05-01 _(verified: appears in the quote below)_ > 7813,IS,,ISO 2816:1973,Fundamental characteristics of a system of shoe sizing to be known as Mondopoint,"Caractéristiques fondamentales d'un système de mesure des chaussures, dit système Mondopoint",1973-05-01,1,['61.060'],ISO/TC 137,9599,,[17106],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2817:1974 - **Identifier:** ISO 2817:1974 _(verified: appears in the quote below)_ - **Item title:** Tobacco and tobacco products — Determination of silica content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2817:1999 - **Withdrawn / published date:** 1974-03-01 _(verified: appears in the quote below)_ > 7814,IS,,ISO 2817:1974,Tobacco and tobacco products — Determination of silica content,Tabac et produits du tabac — Détermination de la teneur en silice,1974-03-01,1,['65.160'],ISO/TC 126/SC 1,9599,,[22453],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28178:2009 - **Identifier:** ISO 28178:2009 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Exchange format for colour and process control data using XML or ASCII text _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28178:2022 - **Withdrawn / published date:** 2009-03-16 _(verified: appears in the quote below)_ > 44527,IS,,ISO 28178:2009,Graphic technology — Exchange format for colour and process control data using XML or ASCII text,Technologie graphique — Format d'échange pour les données de couleur et de contrôle de procédé en utilisant du texte XML ou ASCII,2009-03-16,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,[82264],['en'],36,"ISO 28178:2009 defines an exchange format for colour and process control data (and the associated metadata necessary for its proper interpretation) in electronic form using either XML or ASCII formatted data files. It maintains human readability of the data as well as enabling machine readability. It includes a series of predefined tags and keywords, and provides ex Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2818:1980 - **Identifier:** ISO 2818:1980 _(verified: appears in the quote below)_ - **Item title:** Plastics — Preparation of test specimens by machining _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2818:1994 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 7815,IS,,ISO 2818:1980,Plastics — Preparation of test specimens by machining,Plastiques — Préparation des éprouvettes par usinage,1980-10-01,2,['83.080'],ISO/TC 61,9599,,[7816],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2818:1994 - **Identifier:** ISO 2818:1994 _(verified: appears in the quote below)_ - **Item title:** Plastics — Preparation of test specimens by machining _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2818:2018 | ISO/WD 2818 | ISO/DIS 2818 - **Withdrawn / published date:** 1994-08-18 _(verified: appears in the quote below)_ > 7816,IS,,ISO 2818:1994,Plastics — Preparation of test specimens by machining,Plastiques — Préparation des éprouvettes par usinage,1994-08-18,3,['83.080.01'],ISO/TC 61/SC 9,9599,[7815],"[70414,33338,50651]","['en','fr']",11,"
Cancels and replaces the second edition (1980). Establishes the general principles and procedures to be followed when machining and notching test specimens from compression-moulded and injection-moulded plastics, extruded sheets, plates and partially finished or wholly finished products.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2818:1994/Cor 1:2007 - **Identifier:** ISO 2818:1994/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics — Preparation of test specimens by machining — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2818:2018 - **Withdrawn / published date:** 2007-11-15 _(verified: appears in the quote below)_ > 50618,IS,Cor,ISO 2818:1994/Cor 1:2007,Plastics — Preparation of test specimens by machining — Technical Corrigendum 1,Plastiques — Préparation des éprouvettes par usinage — Rectificatif technique 1,2007-11-15,3,['83.080.01'],ISO/TC 61/SC 9,9599,,[70414],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2819:1980 - **Identifier:** ISO 2819:1980 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2819:2017 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 7817,IS,,ISO 2819:1980,Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion,Revêtements métalliques sur bases métalliques — Dépôts électrolytiques et dépôts par voie chimique — Liste des différentes méthodes d'essai d'adhérence,1980-08-01,2,['25.220.40'],ISO/TC 107,9599,,[70830],"['en','fr']",6,"Is limited to qualitative tests. Table 2 indicates the suitablility of each test for some of the most usual types of metallic coatings. Most of the tests are capable of destroying both the coating and the article being tested. Some destroy the coating only, but it should not be assumed that the articles are Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28198:2009 - **Identifier:** ISO 28198:2009 _(verified: appears in the quote below)_ - **Item title:** Vegetable fats and oils — Determination of toluene insoluble matter _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 28198 | ISO 28198:2018 - **Withdrawn / published date:** 2009-08-27 _(verified: appears in the quote below)_ > 44529,IS,,ISO 28198:2009,Vegetable fats and oils — Determination of toluene insoluble matter,Corps gras d'origine végétale — Détermination des matières insolubles dans le toluène,2009-08-27,1,['67.200.10'],ISO/TC 34/SC 11,9599,,"[70160,74099]","['en','fr','ru']",7,"
ISO 28198:2009 specifies a method for the determination of the content of toluene insoluble matter (TIM) in lecithin formulations, which indicates the presence of impurities such as protein, carbohydrate-containing extraction residues and other solid contaminants. This method is applicable to all types of vegetable lecithin.
The purpose of the method is to enable the analysis of lecithin under several regulations. Lecithi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28199-1:2009 - **Identifier:** ISO 28199-1:2009 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28199-1:2021 - **Withdrawn / published date:** 2009-08-20 _(verified: appears in the quote below)_ > 44530,IS,,ISO 28199-1:2009,Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels,Peintures et vernis — Évaluation des propriétés des systèmes de revêtement liées au mode d'application — Partie 1: Vocabulaire pertinent et préparation des panneaux d'essai,2009-08-20,1,['87.040'],ISO/TC 35/SC 9,9599,,[76046],"['en','fr','ru']",19,"
ISO 28199-1:2009 defines terms relating to the evaluation of coating materials in research, development and production with regard to their suitability and safety for industrial processes and error analysis.
ISO 28199-1:2009 specifies methods for the p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28199-1:2009/Cor 1:2009 - **Identifier:** ISO 28199-1:2009/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28199-1:2021 - **Withdrawn / published date:** 2009-12-07 _(verified: appears in the quote below)_ > 55501,IS,Cor,ISO 28199-1:2009/Cor 1:2009,Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels — Technical Corrigendum 1,Peintures et vernis — Évaluation des propriétés des systèmes de revêtement liées au mode d'application — Partie 1: Vocabulaire pertinent et préparation des panneaux d'essai — Rectificatif technique 1,2009-12-07,1,['87.040'],ISO/TC 35/SC 9,9599,,[76046],"['en','fr','ru']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28199-2:2009 - **Identifier:** ISO 28199-2:2009 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28199-2:2021 - **Withdrawn / published date:** 2009-08-20 _(verified: appears in the quote below)_ > 44531,IS,,ISO 28199-2:2009,"Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling","Peintures et vernis — Évaluation des propriétés des systèmes de revêtement liées au mode d'application — Partie 2: Stabilité des couleurs, pouvoir masquant du procédé, détrempe, absorption des pertes de peinture à la pulvérisation, mouillage, texture superficielle et marbrures",2009-08-20,1,['87.040'],ISO/TC 35/SC 9,9599,,[76047],"['en','fr','ru']",9,"
ISO 28199-2:2009 specifies methods for the determination of colour stability, process Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28199-3:2009 - **Identifier:** ISO 28199-3:2009 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28199-3:2021 - **Withdrawn / published date:** 2009-08-20 _(verified: appears in the quote below)_ > 44532,IS,,ISO 28199-3:2009,"Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power","Peintures et vernis — Évaluation des propriétés des systèmes de revêtement liées au mode d'application — Partie 3: Évaluation visuelle du festonnage, de la formation de bulles, des piqûres et du pouvoir masquant",2009-08-20,1,['87.040'],ISO/TC 35/SC 9,9599,,[76048],"['en','fr','ru']",9,"
ISO 28199-3:2009 specifies visual methods for the assessment of tendency toward sagging, formation of bubbles, pinholing and hiding power of coating materials applied to a test panel under Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 282:1975 - **Identifier:** ISO 282:1975 _(verified: appears in the quote below)_ - **Item title:** Conveyor belts — Sampling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 282:1992 - **Withdrawn / published date:** 1975-05-01 _(verified: appears in the quote below)_ > 4195,IS,,ISO 282:1975,Conveyor belts — Sampling,Courroies transporteuses — Échantillonnage,1975-05-01,1,['53.040.20'],ISO/TC 41,9599,,[4196],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28219:2009 - **Identifier:** ISO 28219:2009 _(verified: appears in the quote below)_ - **Item title:** Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28219:2017 - **Withdrawn / published date:** 2009-01-05 _(verified: appears in the quote below)_ > 44534,IS,,ISO 28219:2009,Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols,Emballage — Étiquetage et marquage direct sur le produit avec un code à barres et des symboles bidimensionnels,2009-01-05,1,"['55.020','35.040.50']",ISO/TC 122,9599,,[65014],"['en','ru']",49,"
ISO 28219:2009
ISO 28219:2017
- defines minimum requirements for identifying items,
- provides guidelines for item marking with machine-readable symbols,
- covers both labels and direct marking of items,
- includes testing procedures for label adhesive characteristics and mark durability,
- provides guidance for the formatting on the label Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2825:1981 - **Identifier:** ISO 2825:1981 _(verified: appears in the quote below)_ - **Item title:** Spices and condiments — Preparation of a ground sample for analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2825:2026 - **Withdrawn / published date:** 1981-07-01 _(verified: appears in the quote below)_ > 7821,IS,,ISO 2825:1981,Spices and condiments — Preparation of a ground sample for analysis,Épices — Préparation d'un échantillon moulu en vue de l'analyse,1981-07-01,2,['67.220.10'],ISO/TC 34/SC 7,9599,,[86624],"['en','fr']",1,"
Basis for this method is the laboratory sample obtained by the method specified in ISO 948. The principle of determination consists in grinding the laboratory sample, which has been previously mixed, to obtain particles of the size specified in the International Standard appropriate to the spice or condiment concerned or, if not so specified, to obtain particles of size approximately 1 mm.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2827:1973 - **Identifier:** ISO 2827:1973 _(verified: appears in the quote below)_ - **Item title:** Photography — Determination of the light output of electronic flash equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2827:1988 - **Withdrawn / published date:** 1973-11-01 _(verified: appears in the quote below)_ > 7823,IS,,ISO 2827:1973,Photography — Determination of the light output of electronic flash equipment,Photographie — Détermination de l'émission lumineuse des équipements électroniques à éclairs,1973-11-01,1,['37.040.10'],ISO/TC 42,9599,,[7824],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 283-1:2000 - **Identifier:** ISO 283-1:2000 _(verified: appears in the quote below)_ - **Item title:** Textile conveyor belts — Full thickness tensile testing — Part 1: Determination of tensile strength, elongation at break and elongation at the reference load _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 283:2007 - **Withdrawn / published date:** 2000-10-26 _(verified: appears in the quote below)_ > 22088,IS,,ISO 283-1:2000,"Textile conveyor belts — Full thickness tensile testing — Part 1: Determination of tensile strength, elongation at break and elongation at the reference load","Courroies transporteuses à carcasse textile — Essai de traction en pleine épaisseur — Partie 1: Détermination de la résistance à la traction, de l'allongement à la rupture et de l'allongement sous charge de référence",2000-10-26,1,['53.040.20'],ISO/TC 41/SC 3,9599,[4198],[38394],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 283-1:2000/Cor 1:2006 - **Identifier:** ISO 283-1:2000/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Textile conveyor belts — Full thickness tensile testing — Part 1: Determination of tensile strength, elongation at break and elongation at the reference load — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 283:2007 - **Withdrawn / published date:** 2006-11-22 _(verified: appears in the quote below)_ > 45017,IS,Cor,ISO 283-1:2000/Cor 1:2006,"Textile conveyor belts — Full thickness tensile testing — Part 1: Determination of tensile strength, elongation at break and elongation at the reference load — Technical Corrigendum 1","Courroies transporteuses à carcasse textile — Essai de traction en pleine épaisseur — Partie 1: Détermination de la résistance à la traction, de l'allongement à la rupture et de l'allongement sous charge de référence — Rectificatif technique 1",2006-11-22,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[38394],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 283:1980 - **Identifier:** ISO 283:1980 _(verified: appears in the quote below)_ - **Item title:** Full thickness tensile strength and elongation of conveyor belts — Specifications and method of test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 283:1990 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 4197,IS,,ISO 283:1980,Full thickness tensile strength and elongation of conveyor belts — Specifications and method of test,Résistance et allongement par traction des courroies transporteuses en pleine épaisseur — Spécifications et méthode d'essai,1980-08-01,1,['53.040.20'],ISO/TC 41,9599,,[4198],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 283:1990 - **Identifier:** ISO 283:1990 _(verified: appears in the quote below)_ - **Item title:** Conveyor belts — Full thickness tensile strength and elongation — Specifications and method of test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 283-1:2000 | ISO 14890:2003 - **Withdrawn / published date:** 1990-11-08 _(verified: appears in the quote below)_ > 4198,IS,,ISO 283:1990,Conveyor belts — Full thickness tensile strength and elongation — Specifications and method of test,Courroies transporteuses — Résistance et allongement par traction en pleine épaisseur — Spécifications et méthode d'essai,1990-11-08,2,['53.040.20'],ISO/TC 41/SC 3,9599,[4197],"[22088,25868]","['en','fr']",7,Specifies the conditions for full thickness tensile strength testing of conveyor belts and gives the corresponding specifications. Applies to both 'surface' and 'underground' belts. Does not apply to belts with a metal or with an aramid carcass. This second edition cancels and replaces the first edition (1980).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 283:2007 - **Identifier:** ISO 283:2007 _(verified: appears in the quote below)_ - **Item title:** Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 283:2015 - **Withdrawn / published date:** 2007-06-13 _(verified: appears in the quote below)_ > 38394,IS,,ISO 283:2007,"Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method","Courroies transporteuses à carcasse textile — Résistance à la traction, allongement à la rupture et allongement sous force de référence en pleine épaisseur — Méthode d'essai",2007-06-13,3,['53.040.20'],ISO/TC 41/SC 3,9599,"[22088,45017]",[61035],"['en','fr']",10,"ISO 283:2007 specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor belts having a textile carcass. The method can also be used for the determina Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 283:2015 - **Identifier:** ISO 283:2015 _(verified: appears in the quote below)_ - **Item title:** Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 283:2023 - **Withdrawn / published date:** 2015-10-26 _(verified: appears in the quote below)_ > 61035,IS,,ISO 283:2015,"Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method","Courroies transporteuses à carcasse textile — Résistance à la traction, allongement à la rupture et allongement sous force de référence en pleine épaisseur — Méthode d'essai",2015-10-26,4,['53.040.20'],ISO/TC 41/SC 3,9599,[38394],[84330],"['en','fr']",9,"
ISO 283:2015 specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor belts having a textile carcass. The method can also be used for the determination of f Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28319:2010 - **Identifier:** ISO 28319:2010 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Laser welding _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28319:2018 - **Withdrawn / published date:** 2010-05-18 _(verified: appears in the quote below)_ > 44645,IS,,ISO 28319:2010,Dentistry — Laser welding,Médecine bucco-dentaire — Soudage par laser,2010-05-18,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[70629],"['en','fr']",13,"
ISO 28319:2010 specifies requirements and test methods for laser welding, in the dental laboratory, of materials suitable for use in metallic restorations and appliances.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2834-1:2006 - **Identifier:** ISO 2834-1:2006 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2834-1:2020 - **Withdrawn / published date:** 2006-06-14 _(verified: appears in the quote below)_ > 41292,IS,,ISO 2834-1:2006,Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks,Technologie graphique — Préparation en laboratoire des impressions d'essai — Partie 1: Encres compactes,2006-06-14,1,['87.080'],ISO/TC 130,9599,"[38881,20256]",[76486],['en'],7,"ISO 2834-1:2006 specifies a laboratory method for the preparation of printed samples made with paste inks (such as inks used for lithographic and letterpress printing). Such printed samples are intended to be used for reflection-based measurements, such as colorimetry and reflection density as well as for testing light fastness, and the resistance of printing inks to mechanical and chemical attack regarding ei Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2834:1981 - **Identifier:** ISO 2834:1981 _(verified: appears in the quote below)_ - **Item title:** Printing inks — Preparation of standardized prints for determination of resistance to physical and chemical agents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2834:1999 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 7831,IS,,ISO 2834:1981,Printing inks — Preparation of standardized prints for determination of resistance to physical and chemical agents,Encres d'imprimerie — Réalisation d'impressions normalisées pour la détermination de la résistance aux agents physiques et chimiques,1981-11-01,2,['87.080'],ISO/TC 130,9599,,[20256],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2834:1999 - **Identifier:** ISO 2834:1999 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Test print preparation for offset and letterpress inks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2834-2:2007 | ISO 2834-1:2006 - **Withdrawn / published date:** 1999-10-07 _(verified: appears in the quote below)_ > 20256,IS,,ISO 2834:1999,Graphic technology — Test print preparation for offset and letterpress inks,Technologie graphique — Réalisation d'impressions pour encres pour offset et typographie,1999-10-07,3,['87.080'],ISO/TC 130,9599,[7831],"[41295,41292]",['en'],7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2834:1999/Cor 1:2003 - **Identifier:** ISO 2834:1999/Cor 1:2003 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Test print preparation for offset and letterpress inks — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2834-2:2007 | ISO 2834-1:2006 - **Withdrawn / published date:** 2003-07-03 _(verified: appears in the quote below)_ > 38881,IS,Cor,ISO 2834:1999/Cor 1:2003,Graphic technology — Test print preparation for offset and letterpress inks — Technical Corrigendum 1,Technologie graphique — Réalisation d'impressions pour encres pour offset et typographie — Rectificatif technique 1,2003-07-03,3,['87.080'],ISO/TC 130,9599,,"[41295,41292]",['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2834-2:2007 - **Identifier:** ISO 2834-2:2007 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 2834-2 | ISO 2834-2:2015 - **Withdrawn / published date:** 2007-12-06 _(verified: appears in the quote below)_ > 41295,IS,,ISO 2834-2:2007,Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks,Technologie graphique — Préparation en laboratoire des impressions d'essai — Partie 2: Encres d'impression liquides,2007-12-06,1,['87.080'],ISO/TC 130,9599,"[38881,20256]","[57638,65431]",['en'],8,"
ISO 2834-2:2007 specifies a test method for preparation of test prints produced with liquid water-based or solvent-based printing inks as used in flexography and gravure printing. These test prints are intended primarily for optical tests, such as colorimetry, transparency and reflection density as described in ISO 2846-3 and ISO 2846-5. They can also be used for testing gloss, light Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2834-2:2015 - **Identifier:** ISO 2834-2:2015 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2834-2:2022 - **Withdrawn / published date:** 2015-06-03 _(verified: appears in the quote below)_ > 65431,IS,,ISO 2834-2:2015,Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks,Technologie graphique — Préparation en laboratoire des impressions d'essai — Partie 2: Encres d'impression liquides,2015-06-03,2,['87.080'],ISO/TC 130,9599,[41295],[82263],['en'],7,"
ISO 2834-2:2015 specifies a test method for preparation of test prints produced with liquid water-based or solvent-based printing inks as used in flexography and gravure printing. These test prints are intended primarily for optical tests, such as gloss, colorimetry, transparency and reflection density. They can also be used for testing light fastness and the chemical, physical and mechanical resist Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2836:1974 - **Identifier:** ISO 2836:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Assessment of resistance to water _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:1999 - **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_ > 7833,IS,,ISO 2836:1974,Prints and printing inks — Assessment of resistance to water,Impressions et encres d'imprimerie — Évaluation de la résistance à l'eau,1974-08-01,1,['87.080'],ISO/TC 130,9599,,[28313],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2836:1999 - **Identifier:** ISO 2836:1999 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Prints and printing inks — Assessment of resistance to various agents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:2004 - **Withdrawn / published date:** 1999-10-07 _(verified: appears in the quote below)_ > 28313,IS,,ISO 2836:1999,Graphic technology — Prints and printing inks — Assessment of resistance to various agents,Technologie graphique — Impressions et encres d'imprimerie — Évaluation de la résistance à divers agents,1999-10-07,2,['87.080'],ISO/TC 130,9599,"[7841,7838,7835,7839,7836,7833,7840,7837]",[37551],['en'],4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2836:2004 - **Identifier:** ISO 2836:2004 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:2021 - **Withdrawn / published date:** 2004-03-16 _(verified: appears in the quote below)_ > 37551,IS,,ISO 2836:2004,Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents,Technologie graphique — Impressions et encres d'imprimerie — Évaluation de la résistance des impressions à divers agents,2004-03-16,3,['87.080'],ISO/TC 130,9599,"[28313,23388,2129]",[76452],['en'],8,"
ISO 2836:2004 specifies methods of assessing the resistance of printed materials to liquid and solid agents, solvents, varnishes, and acids. It applies to printing on all substrates by all of the traditional printing processes and digital imaging processes, such as ink-jet, electrophotography, etc., using marking materials appropriate to the printing process used.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2837:1974 - **Identifier:** ISO 2837:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Assessment of resistance to solvents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2837:1996 - **Withdrawn / published date:** 1974-07-01 _(verified: appears in the quote below)_ > 7834,IS,,ISO 2837:1974,Prints and printing inks — Assessment of resistance to solvents,Impressions et encres d'imprimerie — Évaluation de la résistance aux solvants,1974-07-01,1,['87.080'],ISO/TC 130,9599,,[23388],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2837:1996 - **Identifier:** ISO 2837:1996 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Prints and printing inks — Assessment of resistance to solvents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:2004 - **Withdrawn / published date:** 1996-08-15 _(verified: appears in the quote below)_ > 23388,IS,,ISO 2837:1996,Graphic technology — Prints and printing inks — Assessment of resistance to solvents,Technologie graphique — Impressions et encres d'imprimerie — Évaluation de la résistance aux solvants,1996-08-15,2,['87.080'],ISO/TC 130,9599,[7834],[37551],"['en','fr']",2,"Describes a method of assessing the resistance of prints and printing inks to solvents. Applies to all printing substrates such as paper, board, metals and plastics and to all printing processes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2838:1974 - **Identifier:** ISO 2838:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Assessment of resistance to alkalis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:1999 - **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_ > 7835,IS,,ISO 2838:1974,Prints and printing inks — Assessment of resistance to alkalis,Impressions et encres d'imprimerie — Évaluation de la résistance aux alcalis,1974-08-01,1,['87.080'],ISO/TC 130,9599,,[28313],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2839:1974 - **Identifier:** ISO 2839:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Assessment of resistance to soaps _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:1999 - **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_ > 7836,IS,,ISO 2839:1974,Prints and printing inks — Assessment of resistance to soaps,Impressions et encres d'imprimerie — Évaluation de la résistance aux savons,1974-08-01,1,['87.080'],ISO/TC 130,9599,,[28313],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28399:2011 - **Identifier:** ISO 28399:2011 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Products for external tooth bleaching _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 28399 | ISO 28399:2020 - **Withdrawn / published date:** 2011-01-14 _(verified: appears in the quote below)_ > 44686,IS,,ISO 28399:2011,Dentistry — Products for external tooth bleaching,"Médecine bucco-dentaire — Produits d'éclaircissement dentaire, à usage externe",2011-01-14,1,['97.170'],ISO/TC 106/SC 7,9599,,"[67747,70368]","['en','fr']",13,"ISO 28399:2011 specifies requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products). It also specifies requirements for their packaging, labelling and instructions for use.
The following tooth bleaching products are not c Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28399:2020 - **Identifier:** ISO 28399:2020 _(verified: appears in the quote below)_ - **Item title:** Dentistry — External tooth bleaching products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28399:2021 - **Withdrawn / published date:** 2020-03-10 _(verified: appears in the quote below)_ > 70368,IS,,ISO 28399:2020,Dentistry — External tooth bleaching products,Médecine bucco-dentaire — Produits d'éclaircissement dentaire par voie externe,2020-03-10,2,['97.170'],ISO/TC 106/SC 7,9599,[44686],[81568],"['en','fr']",22,"
This document specifies requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and manufacturer's instructions for use.
This document is not applicable Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 284:1982 - **Identifier:** ISO 284:1982 _(verified: appears in the quote below)_ - **Item title:** Conveyor belts — Electrical conductivity — Specification and method of test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 284:2003 - **Withdrawn / published date:** 1982-05-01 _(verified: appears in the quote below)_ > 4199,IS,,ISO 284:1982,Conveyor belts — Electrical conductivity — Specification and method of test,Courroies transporteuses — Conductibilité électrique — Spécification et méthode d'essai,1982-05-01,2,['53.040.20'],ISO/TC 41/SC 3,9599,,[30119],"['en','fr']",3,
This second editions cancels and replaces the first edition (1975). Specifies the maximum electrical resistance of a conveyor belt and the corresponding mehtod of measurement. The test is intended to ensure that the belt is sufficiently conductive to drain off charges of electricity which may form on it in service.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 284:2003 - **Identifier:** ISO 284:2003 _(verified: appears in the quote below)_ - **Item title:** Conveyor belts — Electrical conductivity — Specification and test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 284:2012 - **Withdrawn / published date:** 2003-07-21 _(verified: appears in the quote below)_ > 30119,IS,,ISO 284:2003,Conveyor belts — Electrical conductivity — Specification and test method,Courroies transporteuses — Conductibilité électrique — Spécification et méthode d'essai,2003-07-21,3,['53.040.10'],ISO/TC 41/SC 3,9599,[4199],[61044],"['en','fr']",6,"ISO 284:2003 specifies the maximum electrical resistance of a conveyor belt and the corresponding test method.
The test is intended to ensure that the belt is sufficiently conductive to avoid the accumulation of electrical static charge which may be developed during service use.
ISO 284:2003 is not suitable or applicable to light conveyor belts as described by EN 873, the static electrical properties of which are measu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 284:2012 - **Identifier:** ISO 284:2012 _(verified: appears in the quote below)_ - **Item title:** Conveyor belts — Electrical conductivity — Specification and test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 284:2025 - **Withdrawn / published date:** 2012-11-29 _(verified: appears in the quote below)_ > 61044,IS,,ISO 284:2012,Conveyor belts — Electrical conductivity — Specification and test method,Courroies transporteuses — Conductibilité électrique — Spécification et méthode d'essai,2012-11-29,4,['53.040.10'],ISO/TC 41/SC 3,9599,[30119],[88542],"['en','fr']",6,"
ISO 284:2012 specifies the maximum electrical resistance of a conveyor belt and the corresponding test method.
The test is intended to ensure that the belt is sufficiently conductive to avoid the accumulation of electrical static charge which can be developed during service use.
ISO 284:2012 is not suitable or applicable to light conveyor belts as described in ISO 21183-1, the static electrical properties of which are Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2840:1974 - **Identifier:** ISO 2840:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Determination of the resistance of prints to detergents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:1999 - **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_ > 7837,IS,,ISO 2840:1974,Prints and printing inks — Determination of the resistance of prints to detergents,Impressions et encres d'imprimerie — Détermination de la résistance des impressions aux détergents,1974-08-01,1,['87.080'],ISO/TC 130,9599,,[28313],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28401:2010 - **Identifier:** ISO 28401:2010 _(verified: appears in the quote below)_ - **Item title:** Light metals and their alloys — Titanium and titanium alloys — Classification and terminology _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28401:2024 - **Withdrawn / published date:** 2010-11-23 _(verified: appears in the quote below)_ > 44689,IS,,ISO 28401:2010,Light metals and their alloys — Titanium and titanium alloys — Classification and terminology,Métaux légers et leurs alliages — Titane et alliages de titane — Classification et terminologie,2010-11-23,1,"['77.120.50','01.040.77']",ISO/TC 79/SC 11,9599,,[84252],['en'],13,
ISO 28401:2010 gives a classification of titanium and titanium alloys. It also gives terms and definitions in the field of titanium and its alloys.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2841:1974 - **Identifier:** ISO 2841:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Determination of the resistance of prints to cheese _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:1999 - **Withdrawn / published date:** 1974-07-01 _(verified: appears in the quote below)_ > 7838,IS,,ISO 2841:1974,Prints and printing inks — Determination of the resistance of prints to cheese,Impressions et encres d'imprimerie — Détermination de la résistance des impressions aux fromages,1974-07-01,1,['87.080'],ISO/TC 130,9599,,[28313],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2842:1974 - **Identifier:** ISO 2842:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Determination of the resistance of prints to edible oils and fats _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:1999 - **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_ > 7839,IS,,ISO 2842:1974,Prints and printing inks — Determination of the resistance of prints to edible oils and fats,Impressions et encres d'imprimerie — Détermination de la résistance des impressions aux huiles et graisses alimentaires,1974-08-01,1,['87.080'],ISO/TC 130,9599,,[28313],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2843:1974 - **Identifier:** ISO 2843:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Determination of the resistance of prints to impregnation by wax or paraffin wax _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:1999 - **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_ > 7840,IS,,ISO 2843:1974,Prints and printing inks — Determination of the resistance of prints to impregnation by wax or paraffin wax,Impressions et encres d'imprimerie — Détermination de la résistance des impressions à l'imprégnation par les cires ou paraffines,1974-08-01,1,['87.080'],ISO/TC 130,9599,,[28313],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2844:1974 - **Identifier:** ISO 2844:1974 _(verified: appears in the quote below)_ - **Item title:** Prints and printing inks — Determination of the resistance of prints to spices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2836:1999 - **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_ > 7841,IS,,ISO 2844:1974,Prints and printing inks — Determination of the resistance of prints to spices,Impressions et encres d'imprimerie — Détermination de la résistance des impressions aux épices,1974-08-01,1,['87.080'],ISO/TC 130,9599,,[28313],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2845:1975 - **Identifier:** ISO 2845:1975 _(verified: appears in the quote below)_ - **Item title:** Set of printing inks for letterpress printing — Colorimetric characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2846-1:1997 - **Withdrawn / published date:** 1975-07-01 _(verified: appears in the quote below)_ > 7842,IS,,ISO 2845:1975,Set of printing inks for letterpress printing — Colorimetric characteristics,Gamme d'encres primaires pour la typographie — Caractéristiques colorimétriques,1975-07-01,1,['87.080'],ISO/TC 130,9599,,[7844],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2846-1:1997 - **Identifier:** ISO 2846-1:1997 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Colour and transparency of ink sets for four-colour-printing — Part 1: Sheet-fed and heat-set web offset lithographic printing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2846-1:2006 - **Withdrawn / published date:** 1997-12-25 _(verified: appears in the quote below)_ > 7844,IS,,ISO 2846-1:1997,Graphic technology — Colour and transparency of ink sets for four-colour-printing — Part 1: Sheet-fed and heat-set web offset lithographic printing,Technologie graphique — Couleur et transparence des gammes d'encre d'impression en quadrichromie — Partie 1: Impression lithographique offset sur feuilles et à chaud,1997-12-25,1,['87.080'],ISO/TC 130,9599,"[7842,7843]",[39377],['en'],19, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2846-1:2006 - **Identifier:** ISO 2846-1:2006 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2846-1:2017 - **Withdrawn / published date:** 2006-11-08 _(verified: appears in the quote below)_ > 39377,IS,,ISO 2846-1:2006,Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing,Technologie graphique — Couleur et transparence des gammes d'encre d'impression en quadrichromie — Partie 1: Impression lithographique offset sur feuilles et à chaud,2006-11-08,2,['87.080'],ISO/TC 130,9599,[7844],[70905],['en'],15,"ISO 2846-1:2006 specifies the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2846:1975 - **Identifier:** ISO 2846:1975 _(verified: appears in the quote below)_ - **Item title:** Set of printing inks for offset printing — Colorimetric characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2846-1:1997 - **Withdrawn / published date:** 1975-07-01 _(verified: appears in the quote below)_ > 7843,IS,,ISO 2846:1975,Set of printing inks for offset printing — Colorimetric characteristics,Gamme d'encres primaires pour l'impression offset — Caractéristiques colorimétriques,1975-07-01,1,['87.080'],ISO/TC 130,9599,,[7844],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2846-2:2000 - **Identifier:** ISO 2846-2:2000 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 2: Coldset offset lithographic printing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2846-2:2007 - **Withdrawn / published date:** 2000-05-04 _(verified: appears in the quote below)_ > 25070,IS,,ISO 2846-2:2000,Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 2: Coldset offset lithographic printing,Technologie graphique — Couleur et transparence des gammes d'encre d'impression en quadrichromie — Partie 2: Impression lithographique offset rotatif coldset,2000-05-04,1,['87.080'],ISO/TC 130,9599,,[42124],['en'],14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2848:1974 - **Identifier:** ISO 2848:1974 _(verified: appears in the quote below)_ - **Item title:** Modular co-ordination — Principles and rules _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2848:1984 - **Withdrawn / published date:** 1974-03-01 _(verified: appears in the quote below)_ > 7845,IS,,ISO 2848:1974,Modular co-ordination — Principles and rules,Coordination modulaires — Principes et règles,1974-03-01,1,['91.010.30'],ISO/TC 59,9599,,[7846],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28500:2009 - **Identifier:** ISO 28500:2009 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — WARC file format _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28500:2017 - **Withdrawn / published date:** 2009-05-13 _(verified: appears in the quote below)_ > 44717,IS,,ISO 28500:2009,Information and documentation — WARC file format,Information et documentation — Format de fichier WARC,2009-05-13,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[68004],['en'],28,"
ISO 28500:2009 specifies the WARC file format:
ISO 28560-1:2011 specifies a model for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries, including academic, public, corporate, special and school.
ISO 28560-1:2011 provides the framework to ensure interoperability between libraries in exchange of libra Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28560-1:2014 - **Identifier:** ISO 28560-1:2014 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — RFID in libraries — Part 1: Data elements and general guidelines for implementation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28560-1:2023 - **Withdrawn / published date:** 2014-08-18 _(verified: appears in the quote below)_ > 65203,IS,,ISO 28560-1:2014,Information and documentation — RFID in libraries — Part 1: Data elements and general guidelines for implementation,Information et documentation — RFID dans les bibliothèques — Partie 1: Éléments de données et lignes directrices générales pour la mise en oeuvre,2014-08-18,2,"['35.240.30','35.040.50']",ISO/TC 46/SC 4,9599,[50996],[85148],['en'],28,"
ISO 28560-1:2014 specifies a model for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries, including academic, public, corporate, special, and school.
ISO 28560-1:2014 provides the framework to ensure interoperability between libraries that exchange Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28560-2:2011 - **Identifier:** ISO 28560-2:2011 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28560-2:2014 - **Withdrawn / published date:** 2011-03-22 _(verified: appears in the quote below)_ > 50997,IS,,ISO 28560-2:2011,Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962,Information et documentation — RFID dans les bibliothèques — Partie 2: Encodage des éléments de données RFID fondé sur les règles de l'ISO/CEI 15962,2011-03-22,1,"['35.240.30','35.040.50']",ISO/TC 46/SC 4,9599,,[65204],['en'],41,"
ISO 28560-2:2011 specifies a data model and encoding rules for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries (including academic, public, corporate, special and school libraries). The rules for encoding a subset of data elements taken from the t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28560-2:2014 - **Identifier:** ISO 28560-2:2014 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28560-2:2018 - **Withdrawn / published date:** 2014-08-18 _(verified: appears in the quote below)_ > 65204,IS,,ISO 28560-2:2014,Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962,Information et documentation — RFID dans les bibliothèques — Partie 2: Encodage des éléments de données RFID fondé sur les règles de l'ISO/CEI 15962,2014-08-18,2,"['35.240.30','35.040.50']",ISO/TC 46/SC 4,9599,[50997],[75672],['en'],42,"
ISO 28560-2:2014 specifies a data model and encoding rules for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries (including national, academic, public, corporate, special, and school libraries). The rules for encoding a subset of data element Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28560-2:2018 - **Identifier:** ISO 28560-2:2018 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28560-2:2023 - **Withdrawn / published date:** 2018-10-12 _(verified: appears in the quote below)_ > 75672,IS,,ISO 28560-2:2018,Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962,Information et documentation — RFID dans les bibliothèques — Partie 2: Encodage des éléments de données RFID fondé sur les règles de l'ISO/CEI 15962,2018-10-12,3,"['35.240.30','35.040.50']",ISO/TC 46/SC 4,9599,[65204],[85149],['en'],44,"
This document specifies a data model and encoding rules for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries (including national, academic, public, corporate, special, and school libraries). The rules for encoding a subset of data elements t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28560-3:2011 - **Identifier:** ISO 28560-3:2011 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — RFID in libraries — Part 3: Fixed length encoding _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28560-3:2014 - **Withdrawn / published date:** 2011-03-22 _(verified: appears in the quote below)_ > 50998,IS,,ISO 28560-3:2011,Information and documentation — RFID in libraries — Part 3: Fixed length encoding,Information et documentation — RFID dans les bibliothèques — Partie 3: Encodage de longueur fixe,2011-03-22,1,"['35.240.30','35.040.50']",ISO/TC 46/SC 4,9599,,[65205],['en'],24,"
ISO 28560-3:2011 provides a data model and encoding rules for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries, including academic, public, corporate, special and school.
ISO 28560-3:2011 specifies the rules for encoding a subset of data elements taken from the total set of data elements listed in ISO 28560-1 into a basic block, and ot Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28560-3:2014 - **Identifier:** ISO 28560-3:2014 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — RFID in libraries — Part 3: Fixed length encoding _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28560-3:2023 - **Withdrawn / published date:** 2014-08-14 _(verified: appears in the quote below)_ > 65205,IS,,ISO 28560-3:2014,Information and documentation — RFID in libraries — Part 3: Fixed length encoding,Information et documentation — RFID dans les bibliothèques — Partie 3: Encodage de longueur fixe,2014-08-14,2,"['35.240.30','35.040.50']",ISO/TC 46/SC 4,9599,[50998],[85150],['en'],24,"
ISO 28560-3:2014 provides a data model and encoding rules for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries (including national, academic, public, corporate, special, and school libraries).
ISO 28560-3:2014 specifies the rules for encoding
a subset of data elements taken from the total set of data elements listed in ISO Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 28560-3:2023 - **Identifier:** ISO 28560-3:2023 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — RFID in libraries — Part 3: Fixed length encoding _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28560-3:2024 - **Withdrawn / published date:** 2023-04-17 _(verified: appears in the quote below)_ > 85150,IS,,ISO 28560-3:2023,Information and documentation — RFID in libraries — Part 3: Fixed length encoding,Information et documentation — RFID dans les bibliothèques — Partie 3: Encodage de longueur fixe,2023-04-17,3,"['35.240.30','35.040.50']",ISO/TC 46/SC 4,9599,[65205],[89939],['en'],25,"
This document provides a data model and encoding rules for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries (including national, academic, public, corporate, specia
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 28564-1:2010
- **Identifier:** ISO 28564-1:2010 _(verified: appears in the quote below)_
- **Item title:** Public information guidance systems — Part 1: Design principles and element requirements for location plans, maps and diagrams _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 28564-1:2026 | ISO/DIS 28564-1
- **Withdrawn / published date:** 2010-10-22 _(verified: appears in the quote below)_
> 44762,IS,,ISO 28564-1:2010,"Public information guidance systems — Part 1: Design principles and element requirements for location plans, maps and diagrams","Systèmes de guidage destinés à l'information du public — Partie 1: Principes de conception et exigences pour éléments de plans, cartes et diagrammes de situation",2010-10-22,1,['01.080.10'],ISO/TC 145/SC 1,9599,,"[90971,88658]","['en','fr']",20," ISO 28564-1:2010 specifies requirements and principles for the design and application of location plans, maps and diagrams used in public areas and workplaces to assist users to understand the environment, locate facilities and determine appropriate routes to reach those facilities. These loca
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 28580:2009
- **Identifier:** ISO 28580:2009 _(verified: appears in the quote below)_
- **Item title:** Passenger car, truck and bus tyres — Methods of measuring rolling resistance — Single point test and correlation of measurement results _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 28580:2018
- **Withdrawn / published date:** 2009-06-24 _(verified: appears in the quote below)_
> 44770,IS,,ISO 28580:2009,"Passenger car, truck and bus tyres — Methods of measuring rolling resistance — Single point test and correlation of measurement results","Pneumatiques pour voitures particulières, camions et autobus — Méthodes de mesure de la résistance au roulement — Essai à condition de mesure unique et corrélation des résultats de mesure",2009-06-24,1,['83.160.01'],ISO/TC 31,9599,,[67531],"['en','fr']",26," ISO 28580:2009 specifies methods for measuring rolling resistance, under controlled laboratory conditions, for new pneumatic tyres designed primarily for use on passenger cars, trucks and buses. Tyres intended for temporary use only are not included in ISO 28580:2009.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2859-0:1995
- **Identifier:** ISO 2859-0:1995 _(verified: appears in the quote below)_
- **Item title:** Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2859-10:2006
- **Withdrawn / published date:** 1995-08-03 _(verified: appears in the quote below)_
> 7865,IS,,ISO 2859-0:1995,Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system,Règles d'échantillonnage pour les contrôles par attributs — Partie 0: Introduction au système d'échantillonnage par attributs de l'ISO 2859,1995-08-03,1,['03.120.30'],ISO/TC 69/SC 5,9599,,[39991],"['en','fr']",56," Explains the terms used in acceptance sampling, describes the various schemes and plans, gives practical advice on sampling inspection and discusses some of the theoretical aspects. This edition cancels and replaces ISO 2859. ISO 2859-10:2006 provides a general introduction to acceptance sampling by attributes and provides a brief summary of the attribute sampling schemes and plans used in ISO 2859-1, ISO 2859-2, ISO 2859-3, ISO 2859-4 and ISO 2859-5, which describe specific types of attribute sampli
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2859:1974
- **Identifier:** ISO 2859:1974 _(verified: appears in the quote below)_
- **Item title:** Sampling procedures and tables for inspection by attributes _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2859-1:1989
- **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_
> 7863,IS,,ISO 2859:1974,Sampling procedures and tables for inspection by attributes,Règles et tables d'échantillonnage pour les contrôles par attributs,1974-11-01,1,['03.120.30'],ISO/TC 69,9599,,[7866],"['en','fr']",62,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2859-2:1985
- **Identifier:** ISO 2859-2:1985 _(verified: appears in the quote below)_
- **Item title:** Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO/CD 2859-2 | ISO/DIS 2859-2 | ISO 2859-2:2020
- **Withdrawn / published date:** 1985-08-29 _(verified: appears in the quote below)_
> 7867,IS,,ISO 2859-2:1985,Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection,"Règles d'échantillonnage pour les contrôles par attributs — Partie 2: Plans d'échantillonnage pour les contrôles de lots isolés, indexés d'après la qualité limite (QL)",1985-08-29,1,['03.120.30'],ISO/TC 69/SC 5,9599,,"[26922,41991,64505]","['en','fr']",21," Can be used when the switching rules in ISO 2859-1 are not applied. Indexing is by a preferred series of limiting qualities with a consumer's risk usually below 10 % and always below 13 %. Procedures are provided to cater for two situations: Procedure A to be used when the suppl
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2859-3:1991
- **Identifier:** ISO 2859-3:1991 _(verified: appears in the quote below)_
- **Item title:** Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2859-3:2005
- **Withdrawn / published date:** 1991-08-29 _(verified: appears in the quote below)_
> 7868,IS,,ISO 2859-3:1991,Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures,Règles d'échantillonnage pour les contrôles par attributs — Partie 3: Procédures d'échantillonnage successif partiel,1991-08-29,1,['03.120.30'],ISO/TC 69/SC 5,9599,,[34684],"['en','fr']",16," The procedures specified are applicable to the inspection of: end items, components and raw materials, services, materials in process, supplies in storage, data or records, administrative procedures. Annexes A and B form an integral part of this standard. Annexes C and D are for information only. ISO 2859-4:2002 establishes the sampling plans and the procedures that can be used to assess whether the quality level of an entity (lot, process, etc) conforms to a declared value. The sampling plans have been devised so as to obtain a risk of less than 5 % of contradicting a correct declared quality level. The risk is 10 % of failing t
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 286-1:1988
- **Identifier:** ISO 286-1:1988 _(verified: appears in the quote below)_
- **Item title:** ISO system of limits and fits — Part 1: Bases of tolerances, deviations and fits _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 286-1:2010 | ISO/DIS 286-1
- **Withdrawn / published date:** 1988-09-08 _(verified: appears in the quote below)_
> 4202,IS,,ISO 286-1:1988,"ISO system of limits and fits — Part 1: Bases of tolerances, deviations and fits","Système ISO de tolérances et d'ajustements — Partie 1: Base des tolérances, écarts et ajustements",1988-09-08,1,['17.040.10'],ISO/TC 213,9599,[4201],"[45975,29647]","['en','fr']",30, This part gives the bases of the ISO system of limits and fits together with the calculated values of the standard tolerances and fundamental deviations. It also gives terms and definitions together with associated symbols. This part gives of the limit deviations for commonly used tolerance classes calculated from the information given in ISO 286-1. It covers values for the upper and the lower deviations which are illustrated by a figure. It tabulates numerical values for basic sizes from 3 mm up to and including 3150 mm. An annex gives a graph
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 286-2:1988/Cor 1:2006
- **Identifier:** ISO 286-2:1988/Cor 1:2006 _(verified: appears in the quote below)_
- **Item title:** ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts — Technical Corrigendum 1 _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 286-2:2010
- **Withdrawn / published date:** 2006-09-14 _(verified: appears in the quote below)_
> 44740,IS,Cor,ISO 286-2:1988/Cor 1:2006,ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts — Technical Corrigendum 1,Système ISO de tolérances et d'ajustements — Partie 2: Tables des degrés de tolérance normalisés et des écarts limites des alésages et des arbres — Rectificatif technique 1,2006-09-14,1,['17.040.10'],ISO/TC 213,9599,,[54915],"['en','fr']",2,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2860:1983
- **Identifier:** ISO 2860:1983 _(verified: appears in the quote below)_
- **Item title:** Earth-moving machinery — Minimum access dimensions _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2860:1992
- **Withdrawn / published date:** 1983-06-01 _(verified: appears in the quote below)_
> 7869,IS,,ISO 2860:1983,Earth-moving machinery — Minimum access dimensions,Engins de terrassement — Dimensions minimales des passages,1983-06-01,3,['53.100'],ISO/TC 127/SC 2,9599,,[7870],"['en','fr']",3,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2861-1:1974
- **Identifier:** ISO 2861-1:1974 _(verified: appears in the quote below)_
- **Item title:** Vacuum technology — Quick-release couplings — Dimensions — Part 1: Clamped type _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2861:2013 | ISO/NP 2861-1
- **Withdrawn / published date:** 1974-08-01 _(verified: appears in the quote below)_
> 7871,IS,,ISO 2861-1:1974,Vacuum technology — Quick-release couplings — Dimensions — Part 1: Clamped type,Technique du vide — Raccords rapides — Dimensions — Partie 1: Raccords à collier,1974-08-01,1,['23.160'],ISO/TC 112,9599,,"[58069,56049]","['en','fr']",2," ISO 2861-1:1974 specifies the dimensions of quick-release couplings of the clamped type as used in vacuum technology, as well as those of the “O” rings and their carriers which are associated with these couplings to ensure vacuum tightness. ISO 2861:2013 specifies the dimensions of the clamped-type quick-release couplings used in vacuum technology, as well as those of the O-rings and their carriers associated with these couplings, used to ensure vacuum tightness. ISO 28620:2010 specifies essential requirements and related test methods for non-electrically driven portable infusion devices. It applies to devices designed for continuous (fixed or adjustable) flow and/or for bolus application. These devices can be used in health care and non-health care settings. They can be applied or administered by health care professionals or by the intended patient. These devices can be pre-filled by the manuf
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 28641:2010
- **Identifier:** ISO 28641:2010 _(verified: appears in the quote below)_
- **Item title:** Rubber compounding ingredients — Organic chemicals — General test methods _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 28641:2018
- **Withdrawn / published date:** 2010-05-14 _(verified: appears in the quote below)_
> 44842,IS,,ISO 28641:2010,Rubber compounding ingredients — Organic chemicals — General test methods,Ingrédients de mélange du caoutchouc — Produits chimiques organiques — Méthodes d'essai générales,2010-05-14,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[70405],"['en','fr','ru']",47," ISO 28641:2010 specifies sampling and test methods for the determination of the general characteristics of organic chemicals such as accelerators, antidegradants (including wax) and vulcanizing agents (excluding peroxides). Specifies criteria for access systems - steps, ladders, walkways, platforms, grab rails (handrails), grab handles, guardrails and enclosure entrance and exit openings as they relate to aiding the operator and servicemen in performing their functions on the machinery. Applies to access systems to the operator's station and to service points on earth-moving machinery as defined in ISO 6165 while the machinery is parked in accordance with manufacturer's instructions. ISO 2867:2006 specifies criteria for access systems (steps, ladders, walkways, platforms, grab rails/handrails, grab handles, guardrails and enclosure entrance and exit openings) as they relate to aiding the operator, maintenance personnel and service personnel in performing their functions on earth-moving machinery. It is applicable to systems giving access to the operator platform and to routine maintenance points on earth-moving machinery as defined in ISO 6165 parked in accordance with the manufacturer's i
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2867:2006/Cor 1:2008
- **Identifier:** ISO 2867:2006/Cor 1:2008 _(verified: appears in the quote below)_
- **Item title:** Earth-moving machinery — Access systems — Technical Corrigendum 1 _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2867:2011
- **Withdrawn / published date:** 2008-06-17 _(verified: appears in the quote below)_
> 51688,IS,Cor,ISO 2867:2006/Cor 1:2008,Earth-moving machinery — Access systems — Technical Corrigendum 1,Engins de terrassement — Moyens d'accès — Rectificatif technique 1,2008-06-17,6,['53.100'],ISO/TC 127/SC 2,9599,,[51279],['en'],1,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 287:1978
- **Identifier:** ISO 287:1978 _(verified: appears in the quote below)_
- **Item title:** Paper and board — Determination of moisture content — Oven-drying method _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 287:1985
- **Withdrawn / published date:** 1978-10-01 _(verified: appears in the quote below)_
> 4204,IS,,ISO 287:1978,Paper and board — Determination of moisture content — Oven-drying method,Papier et carton — Détermination de l'humidité — Méthode par séchage à l'étuve,1978-10-01,1,['85.060'],ISO/TC 6,9599,,[4205],['en'],3,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 287:1985
- **Identifier:** ISO 287:1985 _(verified: appears in the quote below)_
- **Item title:** Paper and board — Determination of moisture content — Oven-drying method _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 287:2009
- **Withdrawn / published date:** 1985-08-01 _(verified: appears in the quote below)_
> 4205,IS,,ISO 287:1985,Paper and board — Determination of moisture content — Oven-drying method,Papier et carton — Détermination de l'humidité — Méthode par séchage à l'étuve,1985-08-01,2,['85.060'],ISO/TC 6/SC 2,9599,[4204],[44637],"['en','fr']",4," Applies to all paper and board, including corrugated fibreboard and solid fibreboard, provided that the paper or board does not contain any substance, other than water, that will escape at the temperature specified for test.