# Withdrawn and superseded ISO standards — page 83 of 246 Records 8201–8300. Every value below is quoted from the source named with it. ## ISO 2332:1993 - **Identifier:** ISO 2332:1993 _(verified: appears in the quote below)_ - **Item title:** Agricultural tractors and machinery — Connection of implements via three-point linkage — Clearance zone around implement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2332:2009 - **Withdrawn / published date:** 1993-10-14 _(verified: appears in the quote below)_ > 7154,IS,,ISO 2332:1993,Agricultural tractors and machinery — Connection of implements via three-point linkage — Clearance zone around implement,Tracteurs et matériels agricoles — Liaisons des instruments par l'attelage trois points — Zone de dégagement autour de l'instrument,1993-10-14,2,['65.060.01'],ISO/TC 23/SC 4,9599,[7167],[42847],"['en','fr']",6,"

Specifies dimensions. Applies to tractors of categories 1 to 3 and to the connection of agricultural implements to three-point linkages complying with ISO 730-1; also applies where implement couplers, complying with ISO 11001-1, ISO 11001-2 and ISO 11001-3, are used.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23337:2007 - **Identifier:** ISO 23337:2007 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23337:2016 - **Withdrawn / published date:** 2007-07-23 _(verified: appears in the quote below)_ > 41460,IS,,ISO 23337:2007,"Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance à l'abrasion à l'aide d'une machine de Lambourn perfectionnée,2007-07-23,1,['83.060'],ISO/TC 45/SC 2,9599,,[70330],"['en','fr']",11,"

ISO 23337:2007 specifies a method for the determination of the resistance of rubber to abrasion using the Improved Lambourn test machine.

The abrasion loss resulting from the slip caused by the difference in circumferential speed between a disc-shaped rubber test piece and an abrasive wheel, which are driven to rotate independently with the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23337:2016 - **Identifier:** ISO 23337:2016 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23337:2024 - **Withdrawn / published date:** 2016-10-27 _(verified: appears in the quote below)_ > 70330,IS,,ISO 23337:2016,"Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance à l'abrasion à l'aide d'une machine de Lambourn perfectionnée,2016-10-27,2,['83.060'],ISO/TC 45/SC 2,9599,[41460],[84124],"['en','fr']",12,"

ISO 23337:2016 specifies a method for the determination of the resistance of rubber to abrasion using the Improved Lambourn test machine.

The abrasion loss resulting from the slip caused by the difference in circumferential speed between a disc-shaped rubber test piece and an abrasive wheel, which are driven to rotate independently w Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23339:2010 - **Identifier:** ISO 23339:2010 _(verified: appears in the quote below)_ - **Item title:** Space systems — Unmanned spacecraft — Estimating the mass of remaining usable propellant _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23312:2022 - **Withdrawn / published date:** 2010-11-24 _(verified: appears in the quote below)_ > 55368,IS,,ISO 23339:2010,Space systems — Unmanned spacecraft — Estimating the mass of remaining usable propellant,Systèmes spatiaux — Véhicules spatiaux non habités — Estimation de la masse d'ergols résiduels utilisable,2010-11-24,1,['49.140'],ISO/TC 20/SC 14,9599,,[75221],['en'],7,"

ISO 23339:2010 gives requirements for estimating the mass of the remaining usable propellant of an unmanned spacecraft in low Earth orbit (LEO) or geostationary Earth orbit (GEO), and for designing propellant measurement systems. It is applicable to spacecraft with either mono- or bi-propellant propulsion systems using liquid or gaseous chemical propellants, and is limited to such systems because they are the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2336-2:1996 - **Identifier:** ISO 2336-2:1996 _(verified: appears in the quote below)_ - **Item title:** Hacksaw blades — Part 2: Dimensions for machine blades _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2336-2:2006 - **Withdrawn / published date:** 1996-04-18 _(verified: appears in the quote below)_ > 25063,IS,,ISO 2336-2:1996,Hacksaw blades — Part 2: Dimensions for machine blades,Lames de scies droites à métaux — Partie 2: Dimensions des lames à machine,1996-04-18,1,['25.100.40'],ISO/TC 29,9599,,[40606],"['en','fr']",2,"

Specifies the dimensions of machine hacksaw blades. It is valid for single edge blades of length from 300 mm up to 700 mm, the tooth pitch of which is no greater than 8,5 mm.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23369:2021 - **Identifier:** ISO 23369:2021 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23369:2022 - **Withdrawn / published date:** 2021-06-16 _(verified: appears in the quote below)_ > 68546,IS,,ISO 23369:2021,Hydraulic fluid power — Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions,Transmissions hydrauliques — Évaluation des performances d’un élément filtrant par la méthode de filtration multi-passe sous débit cyclique,2021-06-16,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[84020],"['en','fr']",34,"

This document specifies:

a) A multi-pass filtration performance test under cyclic flow conditions with continuous contaminant injection for hydraulic fluid power filter elements.

b) A procedure for determining the contaminant capacity, particulate removal and differential pressure characteristics.

c) A test cu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2338:1972 - **Identifier:** ISO 2338:1972 _(verified: appears in the quote below)_ - **Item title:** Parallel pins, unhardened — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2338:1997 | ISO 2338:1986 - **Withdrawn / published date:** 1972-04-01 _(verified: appears in the quote below)_ > 7171,IS,,ISO 2338:1972,"Parallel pins, unhardened — Metric series",Goupilles cylindriques non trempées — Série métrique,1972-04-01,1,['21.060.50'],ISO/TC 2,9599,,"[20001,7172]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2338:1986 - **Identifier:** ISO 2338:1986 _(verified: appears in the quote below)_ - **Item title:** Parallel pins, unhardened _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2338:1997 - **Withdrawn / published date:** 1986-10-30 _(verified: appears in the quote below)_ > 7172,IS,,ISO 2338:1986,"Parallel pins, unhardened",Goupilles cylindriques non trempées,1986-10-30,2,['21.060.50'],ISO/TC 2,9599,[7171],[20001],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23380:2008 - **Identifier:** ISO 23380:2008 _(verified: appears in the quote below)_ - **Item title:** Selection of methods for the determination of trace elements in coal _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23380:2013 - **Withdrawn / published date:** 2008-10-02 _(verified: appears in the quote below)_ > 41486,IS,,ISO 23380:2008,Selection of methods for the determination of trace elements in coal,Sélection des méthodes de détermination des éléments en traces dans le charbon,2008-10-02,1,['73.040'],ISO/TC 27/SC 5,9599,,[63443],['en'],9,"

ISO 23380:2008 provides guidance on the selection of methods used for the determination of trace elements in coal and coal ash. The trace elements of environmental interest include arsenic, beryllium, boron, cadmium, chlorine, chromium, cobalt, copper, fluorine, lead, manganese, mercury, molybdenum, nickel, selenium, vanadium and zinc. To this list can be added the radioactive trace elements, thorium and uranium.

ISO 23380:2008 does not prescribe the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23380:2013 - **Identifier:** ISO 23380:2013 _(verified: appears in the quote below)_ - **Item title:** Selection of methods for the determination of trace elements in coal _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23380:2022 - **Withdrawn / published date:** 2013-09-02 _(verified: appears in the quote below)_ > 63443,IS,,ISO 23380:2013,Selection of methods for the determination of trace elements in coal,Sélection des méthodes de détermination des éléments en traces dans le charbon,2013-09-02,2,['73.040'],ISO/TC 27/SC 5,9599,[41486],[79745],"['en','ru']",9,"

ISO 23380:2013 provides guidance on the selection of methods used for the determination of trace elements in coal. The trace elements of environmental interest include antimony, arsenic, beryllium, boron, cadmium, chlorine, chromium, cobalt, copper, fluorine, lead, manganese, mercury, molybdenum, nickel, selenium, thallium, vanadium, and zinc. The radioactive trace elements thorium and uranium can be added to this list.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23387:2020 - **Identifier:** ISO 23387:2020 _(verified: appears in the quote below)_ - **Item title:** Building information modelling (BIM) — Data templates for construction objects used in the life cycle of built assets — Concepts and principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23387:2025 - **Withdrawn / published date:** 2020-07-06 _(verified: appears in the quote below)_ > 75403,IS,,ISO 23387:2020,Building information modelling (BIM) — Data templates for construction objects used in the life cycle of built assets — Concepts and principles,Modélisation des informations de la construction (BIM) — Modèles de données pour les objets de construction utilisés durant le cycle de vie des biens construits — Concepts et principes,2020-07-06,1,"['35.240.67','91.010.01']",ISO/TC 59/SC 13,9599,,[85391],"['en','fr']",17,"

This document sets out the principles and structure for data templates for construction objects. It is developed to support digital processes using machine-readable formats using a standard data structure to exchange information about any type of constru Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2339:1974 - **Identifier:** ISO 2339:1974 _(verified: appears in the quote below)_ - **Item title:** Taper pins, unhardened — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2339:1986 - **Withdrawn / published date:** 1974-10-01 _(verified: appears in the quote below)_ > 7173,IS,,ISO 2339:1974,"Taper pins, unhardened — Metric series",Goupilles coniques non trempées — Série métrique,1974-10-01,1,['21.060.50'],ISO/TC 2,9599,,[7174],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 234:1975 - **Identifier:** ISO 234:1975 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 234-1975 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 234-1:1983 - **Withdrawn / published date:** 1975-03-01 _(verified: appears in the quote below)_ > 4119,IS,,ISO 234:1975,Withdrawal of ISO 234-1975,Annulation de l'ISO 234-1975,1975-03-01,1,['25.100.60'],ISO/TC 29,9599,,[4120],['en'],5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2340:1972 - **Identifier:** ISO 2340:1972 _(verified: appears in the quote below)_ - **Item title:** Clevis pins — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2340:1986 - **Withdrawn / published date:** 1972-04-01 _(verified: appears in the quote below)_ > 7175,IS,,ISO 2340:1972,Clevis pins — Metric series,Axes d'articulation — Série métrique,1972-04-01,1,['21.060.50'],ISO/TC 2,9599,,[7176],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23402-1:2020 - **Identifier:** ISO 23402-1:2020 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Portable dental equipment for use in non‐permanent healthcare environment — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23402-1:2026 - **Withdrawn / published date:** 2020-09-23 _(verified: appears in the quote below)_ > 75435,IS,,ISO 23402-1:2020,Dentistry — Portable dental equipment for use in non‐permanent healthcare environment — Part 1: General requirements,Médecine bucco-dentaire — Matériel dentaire portatif utilisable dans des environnements de soins de santé non permanents — Partie 1: Exigences générales,2020-09-23,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[89243],"['en','fr']",10,"

This document specifies general requirements and test methods for portable dental equipment for use in non-permanent healthcare environments.

Portable dental equipment within the scope of this document includes portable dental units, portable patient chairs, portable operator's stools, portable operating lights, porta Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2341:1972 - **Identifier:** ISO 2341:1972 _(verified: appears in the quote below)_ - **Item title:** Clevis pins with heads — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2341:1986 - **Withdrawn / published date:** 1972-04-01 _(verified: appears in the quote below)_ > 7177,IS,,ISO 2341:1972,Clevis pins with heads — Metric series,Axes d'articulation avec tête — Série métrique,1972-04-01,1,['21.060.50'],ISO/TC 2,9599,,[7178],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2342:1972 - **Identifier:** ISO 2342:1972 _(verified: appears in the quote below)_ - **Item title:** Slotted headless screws — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 2342 | ISO 2342:2003 - **Withdrawn / published date:** 1972-04-01 _(verified: appears in the quote below)_ > 7179,IS,,ISO 2342:1972,Slotted headless screws — Metric series,"Vis sans tête, fendues — Série métrique",1972-04-01,1,['21.060.10'],ISO/TC 2,9599,,"[29660,36429]","['en','fr']",1,"

Specifies the dimensions for diameters from 1 mm up to and including 10 mm; refers to ISO/R 888 for length, and to ISO/R 262 for thread series; for the different shapes and dimensions of screw ends no reference has been made.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2343:1972 - **Identifier:** ISO 2343:1972 _(verified: appears in the quote below)_ - **Item title:** Hexagon socket set screws — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4028:1977 | ISO 4027:1977 | ISO 4029:1977 | ISO 4026:1977 - **Withdrawn / published date:** 1972-04-01 _(verified: appears in the quote below)_ > 7180,IS,,ISO 2343:1972,Hexagon socket set screws — Metric series,"Vis sans tête, à six pans creux — Série métrique",1972-04-01,1,['21.060.50'],ISO/TC 2,9599,,"[9717,9715,9719,9713]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2344:1981 - **Identifier:** ISO 2344:1981 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Spark plugs M 14 x 1,25 with conical seating and their cylinder head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2344:1987 | ISO 2344:1992 - **Withdrawn / published date:** 1981-05-01 _(verified: appears in the quote below)_ > 7181,IS,,ISO 2344:1981,"Road vehicles — Spark plugs M 14 x 1,25 with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 14 x 1,25 à siège conique et leur logement dans la culasse",1981-05-01,4,['43.060.50'],ISO/TC 22,9599,,"[7182,7183]","['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2344:1987 - **Identifier:** ISO 2344:1987 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2344:1992 - **Withdrawn / published date:** 1987-11-19 _(verified: appears in the quote below)_ > 7182,IS,,ISO 2344:1987,"Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M14 x 1,25 à siège conique et leur logement dans la culasse",1987-11-19,5,['43.060.50'],ISO/TC 22,9599,[7181],[7183],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2344:1992 - **Identifier:** ISO 2344:1992 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2344:1998 - **Withdrawn / published date:** 1992-11-25 _(verified: appears in the quote below)_ > 7183,IS,,ISO 2344:1992,"Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M14 x 1,25 à siège conique et leur logement dans la culasse",1992-11-25,6,['43.060.50'],ISO/TC 22,9599,"[7181,7182]",[26263],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2345:1981 - **Identifier:** ISO 2345:1981 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Spark plugs M 18 x 1,5 with conical seating and their cylinder head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2345:1987 - **Withdrawn / published date:** 1981-05-01 _(verified: appears in the quote below)_ > 7184,IS,,ISO 2345:1981,"Road vehicles — Spark plugs M 18 x 1,5 with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 18 x 1,5 à siège conique et leur logement dans la culasse",1981-05-01,3,['43.060.50'],ISO/TC 22,9599,,[7185],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2345:1987 - **Identifier:** ISO 2345:1987 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — M18 x 1,5 spark-plugs with conical seating and their cylinder head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2345:1994 - **Withdrawn / published date:** 1987-11-19 _(verified: appears in the quote below)_ > 7185,IS,,ISO 2345:1987,"Road vehicles — M18 x 1,5 spark-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M18 x 1,5 à siège conique et leur logement dans la culasse",1987-11-19,4,['43.060.50'],ISO/TC 22,9599,[7184],[21351],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2346:1982 - **Identifier:** ISO 2346:1982 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Compact spark plugs M 14 x 1,25 with flat seating and their cylinder head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2346:1991 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 7186,IS,,ISO 2346:1982,"Road vehicles — Compact spark plugs M 14 x 1,25 with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 14 x 1,25 'compactes' à siège plat et leur logement dans la culasse",1982-12-01,3,['43.060.50'],ISO/TC 22,9599,,[7187],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2346:1991 - **Identifier:** ISO 2346:1991 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — M14 x 1,25 compact spark-plugs with flat seating and their cylinder head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2346:2001 - **Withdrawn / published date:** 1991-10-24 _(verified: appears in the quote below)_ > 7187,IS,,ISO 2346:1991,"Road vehicles — M14 x 1,25 compact spark-plugs with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M14 x 1,25 'compactes' à siège plat et leur logement dans la culasse",1991-10-24,4,['43.060.50'],ISO/TC 22,9599,[7186],[30025],"['en','fr']",4,

Specifies the main characteristics of spark-plugs. Two figures illustrate dimensions and tolerances given. This fourth edition cancels and replaces the third edition (1982).

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23460:2011 - **Identifier:** ISO 23460:2011 _(verified: appears in the quote below)_ - **Item title:** Space projects — Programme management — Dependability assurance requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23460:2023 - **Withdrawn / published date:** 2011-02-23 _(verified: appears in the quote below)_ > 57227,IS,,ISO 23460:2011,Space projects — Programme management — Dependability assurance requirements,Projets spatiaux — Management de programme — Exigences d'assurance de sécurité de fonctionnement,2011-02-23,1,['49.140'],ISO/TC 20/SC 14,9599,,[84726],['en'],18,"

ISO 23460:2011 presents the requirements for a dependability (reliability, availability and maintainability) assurance programme for space projects.

ISO 23460:2011 defines the dependability requirements for space products as well as for system functions implemented in software, and the interaction between hardware and software.

The provisions of ISO 23460:2011 apply to all programme phases.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2347:1981 - **Identifier:** ISO 2347:1981 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Compact spark plugs M 14 x 1,25 with conical seating and their head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2347:1987 - **Withdrawn / published date:** 1981-05-01 _(verified: appears in the quote below)_ > 7188,IS,,ISO 2347:1981,"Road vehicles — Compact spark plugs M 14 x 1,25 with conical seating and their head housing","Véhicules routiers — Bougies d'allumage M 14 x 1,25 'compactes' à siège conique et leur logement dans la culasse",1981-05-01,3,['43.060.50'],ISO/TC 22,9599,,[7189],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2347:1987 - **Identifier:** ISO 2347:1987 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2347:1994 - **Withdrawn / published date:** 1987-11-19 _(verified: appears in the quote below)_ > 7189,IS,,ISO 2347:1987,"Road vehicles — M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M14 x 1,25 'compactes' à siège conique et leur logement dans la culasse",1987-11-19,4,['43.060.50'],ISO/TC 22,9599,[7188],[21349],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23470:2007 - **Identifier:** ISO 23470:2007 _(verified: appears in the quote below)_ - **Item title:** Soil quality — Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 23470 | ISO 23470:2018 - **Withdrawn / published date:** 2007-05-04 _(verified: appears in the quote below)_ > 36879,IS,,ISO 23470:2007,Soil quality — Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution,Qualité du sol — Détermination de la capacité d'échange cationique (CEC) effective et des cations échangeables à l'aide d'une solution de trichlorure de cobaltihexammine,2007-05-04,1,['13.080.20'],ISO/TC 190/SC 3,9599,,"[60543,68765]","['en','fr']",16,"

ISO 23470:2007 specifies a method for the determination of the cation exchange capacity (CEC) and the content of exchangeable cations (Al3+, Ca2+, Fe2+, K+, Mg2+, Mn2+, Na+) in soils using a hexammin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23480:2008 - **Identifier:** ISO 23480:2008 _(verified: appears in the quote below)_ - **Item title:** Tools for pressing — Sliding plates _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23480:2013 - **Withdrawn / published date:** 2008-03-31 _(verified: appears in the quote below)_ > 41581,IS,,ISO 23480:2008,Tools for pressing — Sliding plates,Outillage de presse — Plaques de retenue,2008-03-31,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60723],"['en','fr']",5,"

ISO 23480:2008 specifies the main dimensions and tolerances of sliding plates, to be used in press tools.

It also specifies the designation of sliding plates.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23481:2008 - **Identifier:** ISO 23481:2008 _(verified: appears in the quote below)_ - **Item title:** Tools for pressing — Cam driver plates _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23481:2013 - **Withdrawn / published date:** 2008-03-31 _(verified: appears in the quote below)_ > 41582,IS,,ISO 23481:2008,Tools for pressing — Cam driver plates,Outillage de presse — Plaques d'entraînement de came,2008-03-31,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[62185],"['en','fr']",3,

ISO 23481:2008 specifies the main dimensions and tolerances of plates to be used for cam drivers and slides in tools for pressing.

It also specifies the designation of cam driver plates.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23481:2013 - **Identifier:** ISO 23481:2013 _(verified: appears in the quote below)_ - **Item title:** Tools for pressing — Cam driver plates _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23481:2021 - **Withdrawn / published date:** 2013-11-27 _(verified: appears in the quote below)_ > 62185,IS,,ISO 23481:2013,Tools for pressing — Cam driver plates,Outillage de presse — Plaques d'entraînement de came,2013-11-27,2,['25.120.10'],ISO/TC 29/SC 8,9599,[41582],[79121],"['en','fr']",3,

ISO 23481:2013 specifies the main dimensions and tolerances of plates to be used for cam drivers and slides in tools for pressing. It also specifies the designation of cam driver plates.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2349:1973 - **Identifier:** ISO 2349:1973 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Tapered roller bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 578:1987 | ISO 492:1986 - **Withdrawn / published date:** 1973-04-01 _(verified: appears in the quote below)_ > 7190,IS,,ISO 2349:1973,"Rolling bearings — Tapered roller bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class)","Roulements — Roulements à rouleaux coniques — Sous-ensembles — Tolérances — Séries métriques, tolérances classe normale et classe 6 — Séries en inches, tolérances classe 4 (tolérances classe normale)",1973-04-01,1,['21.100.20'],ISO/TC 4,9599,,"[4673,4542]",['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23498:2020 - **Identifier:** ISO 23498:2020 _(verified: appears in the quote below)_ - **Item title:** Graphic technology — Visual opacity of printed white ink _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23498:2022 - **Withdrawn / published date:** 2020-09-18 _(verified: appears in the quote below)_ > 75783,IS,,ISO 23498:2020,Graphic technology — Visual opacity of printed white ink,Technologie graphique — Opacité visuelle de l'encre blanche imprimée,2020-09-18,1,['87.080'],ISO/TC 130,9599,,[83546],['en'],9,

This document specifies a method of measuring the visual opacity of printed specimens of white ink. It is applicable to printing opaque white ink on transparent and white or coloured opaque substrates.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23499:2008 - **Identifier:** ISO 23499:2008 _(verified: appears in the quote below)_ - **Item title:** Coal — Determination of bulk density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23499:2013 - **Withdrawn / published date:** 2008-05-20 _(verified: appears in the quote below)_ > 41593,IS,,ISO 23499:2008,Coal — Determination of bulk density,Charbon — Détermination de la masse volumique en vrac,2008-05-20,1,['73.040'],ISO/TC 27/SC 1,9599,,[63444],"['en','ru']",6,"

ISO 23499:2008 provides description of a cone procedure for determining an uncompacted bulk density of crushed coal less than 37 mm in size, such as is charged into coke ovens. It focuses on the uncompacted bulk density of coal resulting from flowing the material into a measuring container (box) in the absence of compacting forces.

ISO 23499:2008 does not cover procedures for determining a compacted coal bulk density nor to the testing of fine or powdered coal (for boiler or utility application) nor Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23499:2013 - **Identifier:** ISO 23499:2013 _(verified: appears in the quote below)_ - **Item title:** Coal — Determination of bulk density for the use in charging of coke ovens _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23499:2026 - **Withdrawn / published date:** 2013-07-22 _(verified: appears in the quote below)_ > 63444,IS,,ISO 23499:2013,Coal — Determination of bulk density for the use in charging of coke ovens,Charbon — Détermination de la masse volumique en vrac à des fins d'enfournement dans les fours à coke,2013-07-22,2,['73.040'],ISO/TC 27/SC 1,9599,[41593],[89242],['en'],6,"

ISO 23499:2013 provides description of a cone procedure for determining an uncompacted bulk density of crushed coal less than 37 mm in size, such as is charged into coke ovens. It focuses on the uncompacted bulk density of coal resulting from flowing the material into a measuring container (box) in the absence of compacting forces.

ISO 23499:2013 does not cover procedures for determining a compacted coal bulk densit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 235-1:1975 - **Identifier:** ISO 235-1:1975 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 235/1-1975 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 235:1980 - **Withdrawn / published date:** 1975-02-01 _(verified: appears in the quote below)_ > 4123,IS,,ISO 235-1:1975,Withdrawal of ISO 235/1-1975,Annulation de l/ISO 235/1-1975,1975-02-01,1,['25.100.30'],ISO/TC 29,9599,,[4122],['en'],13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 235:1980 - **Identifier:** ISO 235:1980 _(verified: appears in the quote below)_ - **Item title:** Parallel shank jobber and stub series drills and Morse taper shank drills _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 235:2016 - **Withdrawn / published date:** 1980-11-01 _(verified: appears in the quote below)_ > 4122,IS,,ISO 235:1980,Parallel shank jobber and stub series drills and Morse taper shank drills,Forets à queue cylindrique courts et extra-courts et forets à queue cône Morse,1980-11-01,2,['25.100.30'],ISO/TC 29/SC 9,9599,[4123],[64191],"['en','fr']",13,"

This secon edition, which superseded ISO 235-1:1975, incorporates draft Amendment 1. ISO 235 specifies in dimensions of the above mentioned drills. It comprises, for each type of these drills, three tables giving respectively the dimensions in millimetres, the dimensions in inches, the corrsponding length, in millimetres and in inches, set out as functions of diameter steps.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 235:1980/Cor 1:1996 - **Identifier:** ISO 235:1980/Cor 1:1996 _(verified: appears in the quote below)_ - **Item title:** Parallel shank jobber and stub series drills and Morse taper shank drills — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 235:2016 - **Withdrawn / published date:** 1996-07-04 _(verified: appears in the quote below)_ > 26718,IS,Cor,ISO 235:1980/Cor 1:1996,Parallel shank jobber and stub series drills and Morse taper shank drills — Technical Corrigendum 1,Forets à queue cylindrique courts et extra-courts et forets à queue cône Morse — Rectificatif technique 1,1996-07-04,2,['25.100.30'],ISO/TC 29/SC 9,9599,,[64191],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 235-2:1972 - **Identifier:** ISO 235-2:1972 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 235/2-1972 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7079:1981 - **Withdrawn / published date:** 1972-08-01 _(verified: appears in the quote below)_ > 4124,IS,,ISO 235-2:1972,Withdrawal of ISO 235/2-1972,Annulation de l'ISO 235/2-1972,1972-08-01,1,['25.100.30'],ISO/TC 29,9599,,[13651],['en'],4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23500-1:2019 - **Identifier:** ISO 23500-1:2019 _(verified: appears in the quote below)_ - **Item title:** Preparation and quality management of fluids for haemodialysis and related therapies — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23500-1:2024 - **Withdrawn / published date:** 2019-02-15 _(verified: appears in the quote below)_ > 67610,IS,,ISO 23500-1:2019,Preparation and quality management of fluids for haemodialysis and related therapies — Part 1: General requirements,Préparation et management de la qualité des liquides d'hémodialyse et de thérapies annexes — Partie 1: Exigences générales,2019-02-15,1,['11.040.40'],ISO/TC 150/SC 2,9599,[61863],[84368],"['en','fr']",87,"1.1 General

This document is the base standard for a number of other standards dealing with water treatment equipment, water, dialysis water, concentrates, and dialysis fluid (ISO 23500 series) and provides dialysis practitioners with guidance on the preparation of dialysis fluid for haemodialysis and related therapies and substitution fluid for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23500-2:2019 - **Identifier:** ISO 23500-2:2019 _(verified: appears in the quote below)_ - **Item title:** Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23500-2:2024 - **Withdrawn / published date:** 2019-02-15 _(verified: appears in the quote below)_ > 67611,IS,,ISO 23500-2:2019,Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies,Préparation et management de la qualité des liquides d'hémodialyse et de thérapies annexes — Partie 2: Équipement de traitement de l'eau pour des applications en hémodialyse et aux thérapies apparentées,2019-02-15,1,['11.040.40'],ISO/TC 150/SC 2,9599,[61864],[84369],"['en','fr']",34,"1.1 General

This document is addressed to the manufacturer and/or supplier of water treatment systems and/or devices used for the express purpose of providing water for haemodialysis or related therapies.

1 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23500:2011 - **Identifier:** ISO 23500:2011 _(verified: appears in the quote below)_ - **Item title:** Guidance for the preparation and quality management of fluids for haemodialysis and related therapies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23500:2014 - **Withdrawn / published date:** 2011-05-05 _(verified: appears in the quote below)_ > 45345,IS,,ISO 23500:2011,Guidance for the preparation and quality management of fluids for haemodialysis and related therapies,Directives concernant la préparation et le management de la qualité des fluides d'hémodialyse et de thérapies annexes,2011-05-05,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[61863],['en'],82,"

ISO 23500:2011 provides dialysis practitioners with guidance on the preparation of dialysis fluid for haemodialysis and related therapies and substitution fluid for use in online therapies, such as haemodiafiltration and haemofiltration. As such, ISO 23500:2011 functions as a recommended practice.

ISO 23500:2011 addresses the user's responsibility for the dialysis fluid once Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23500:2014 - **Identifier:** ISO 23500:2014 _(verified: appears in the quote below)_ - **Item title:** Guidance for the preparation and quality management of fluids for haemodialysis and related therapies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23500-1:2019 - **Withdrawn / published date:** 2014-03-17 _(verified: appears in the quote below)_ > 61863,IS,,ISO 23500:2014,Guidance for the preparation and quality management of fluids for haemodialysis and related therapies,Directives concernant la préparation et le management de la qualité des fluides d'hémodialyse et de thérapies annexes,2014-03-17,2,['11.040.40'],ISO/TC 150/SC 2,9599,[45345],[67610],"['en','fr']",85,"

ISO 23500:2014 provides dialysis practitioners with guidance on the preparation of dialysis fluid for haemodialysis and related therapies and substitution fluid for use in online therapies, such as haemodiafiltration and haemofiltration. As such, ISO 23500:2014 functions as a recommended practice.

ISO 23500:2014 addresses the user's responsibility for the dialys Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23500-3:2019 - **Identifier:** ISO 23500-3:2019 _(verified: appears in the quote below)_ - **Item title:** Preparation and quality management of fluids for haemodialysis and related therapies — Part 3: Water for haemodialysis and related therapies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23500-3:2024 - **Withdrawn / published date:** 2019-02-15 _(verified: appears in the quote below)_ > 67612,IS,,ISO 23500-3:2019,Preparation and quality management of fluids for haemodialysis and related therapies — Part 3: Water for haemodialysis and related therapies,Préparation et management de la qualité des liquides d'hémodialyse et de thérapies annexes — Partie 3: Eau pour hémodialyse et thérapies apparentées,2019-02-15,1,['11.040.40'],ISO/TC 150/SC 2,9599,[61862],[84370],"['en','fr']",19,"

This document specifies minimum requirements for water to be used in haemodialysis and related therapies.

This document includes water to be used in the preparation of concentrates, dialysis fluids for haemodialysis, haemodiafiltration and haemofiltration, and for the reprocessing of haemodi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23500-4:2019 - **Identifier:** ISO 23500-4:2019 _(verified: appears in the quote below)_ - **Item title:** Preparation and quality management of fluids for haemodialysis and related therapies — Part 4: Concentrates for haemodialysis and related therapies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23500-4:2024 - **Withdrawn / published date:** 2019-02-15 _(verified: appears in the quote below)_ > 67613,IS,,ISO 23500-4:2019,Preparation and quality management of fluids for haemodialysis and related therapies — Part 4: Concentrates for haemodialysis and related therapies,Préparation et management de la qualité des liquides d'hémodialyse et de thérapies annexes — Partie 4: Concentrés pour hémodialyse et thérapies apparentées,2019-02-15,1,['11.040.40'],ISO/TC 150/SC 2,9599,[61861],[84371],"['en','fr']",22,"

This document specifies minimum requirements for concentrates used for haemodialysis and related therapies.

This document is addressed to the manufacturer of such concentrates. In several instances in this document, the dialysis fluid is addressed, which is made by the end use Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23500-5:2019 - **Identifier:** ISO 23500-5:2019 _(verified: appears in the quote below)_ - **Item title:** Preparation and quality management of fluids for haemodialysis and related therapies — Part 5: Quality of dialysis fluid for haemodialysis and related therapies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23500-5:2024 - **Withdrawn / published date:** 2019-02-15 _(verified: appears in the quote below)_ > 67614,IS,,ISO 23500-5:2019,Preparation and quality management of fluids for haemodialysis and related therapies — Part 5: Quality of dialysis fluid for haemodialysis and related therapies,Préparation et management de la qualité des liquides d'hémodialyse et de thérapies annexes — Partie 5: Qualité des liquides de dialyse pour hémodialyse et thérapies apparentées,2019-02-15,1,['11.040.40'],ISO/TC 150/SC 2,9599,[61860],[84372],"['en','fr']",14,"

This document specifies minimum quality requirements for dialysis fluids used in haemodialysis and related therapies.

This document includes dialysis fluids used for haemodialysis and haemodiafiltration, including substitution fluid for haemodi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23509:2006 - **Identifier:** ISO 23509:2006 _(verified: appears in the quote below)_ - **Item title:** Bevel and hypoid gear geometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23509:2016 - **Withdrawn / published date:** 2006-09-06 _(verified: appears in the quote below)_ > 36885,IS,,ISO 23509:2006,Bevel and hypoid gear geometry,Géométrie des engrenages coniques et hypoïdes,2006-09-06,1,['21.200'],ISO/TC 60/SC 2,9599,,[63832],"['en','fr']",138,"

ISO 23509:2006 specifies the geometry of bevel gears. The term bevel gears is used to mean straight, spiral, zerol bevel and hypoid gear designs. If the text pertains to one or more, but not all, of these, the specific forms are identified.

ISO 23509:2006 is intended for use by an experienced gear designer capable of selecting reasonable values for the factors based on his knowledge and background. It is not intended for use by the engineering public at large.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23509:2016 - **Identifier:** ISO 23509:2016 _(verified: appears in the quote below)_ - **Item title:** Bevel and hypoid gear geometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 23509 | ISO 23509-1:2025 - **Withdrawn / published date:** 2016-11-16 _(verified: appears in the quote below)_ > 63832,IS,,ISO 23509:2016,Bevel and hypoid gear geometry,Géométrie des engrenages coniques et hypoïdes,2016-11-16,2,['21.200'],ISO/TC 60/SC 2,9599,[36885],"[85501,85503]","['en','fr']",138,"

ISO 23509:2016 specifies the geometry of bevel gears.

The term bevel gears is used to mean straight, spiral, zerol bevel and hypoid gear designs. If the text pertains to one or more, but not all, of these, the specific forms are identified.

The manufacturing process of forming the desired tooth form is not intended to imply any specific process, but rather to be general in nature and applicable to all methods of manufacture.

The geometry for the calculation of factors used in bevel gea Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2351-1:2002 - **Identifier:** ISO 2351-1:2002 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 1: Screwdriver bits for slotted head screws _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2351-1:2007 - **Withdrawn / published date:** 2002-08-15 _(verified: appears in the quote below)_ > 28549,IS,,ISO 2351-1:2002,Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 1: Screwdriver bits for slotted head screws,Outils de manoeuvre pour vis et écrous — Embouts tournevis à machine — Partie 1: Embouts tournevis pour vis à tête fendue,2002-08-15,1,['25.140.01'],ISO/TC 29/SC 10,9599,[7192],[41054],"['en','fr']",5,"

ISO 2351-1 prescribes the technical specifications for machine-operated screwdriver bits for slotted head screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to tips for screwdrivers Type C as defined in ISO 2380-1.

It also gives recommended combinations between tips and bits. 7191,IS,,ISO 2351:1972,"Screwdriver bits, for slotted head screws, with male hexagon drive","Embouts tournevis pour vis à tête fendue, à hexagone conducteur mâle",1972-06-01,1,['25.140.01'],ISO/TC 29,9599,,[7192],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2351:1986 - **Identifier:** ISO 2351:1986 _(verified: appears in the quote below)_ - **Item title:** Screwdriver bits for slotted head screws, with male hexagon drive _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2351-1:2002 - **Withdrawn / published date:** 1986-11-13 _(verified: appears in the quote below)_ > 7192,IS,,ISO 2351:1986,"Screwdriver bits for slotted head screws, with male hexagon drive","Embouts tournevis pour vis à tête fendue, à hexagone conducteur mâle",1986-11-13,2,['25.140.01'],ISO/TC 29/SC 10,9599,[7191],[28549],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2351-3:2002 - **Identifier:** ISO 2351-3:2002 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 3: Screwdriver bits for hexagon socket screws _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2351-3:2014 - **Withdrawn / published date:** 2002-08-15 _(verified: appears in the quote below)_ > 29902,IS,,ISO 2351-3:2002,Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 3: Screwdriver bits for hexagon socket screws,Outils de manoeuvre pour vis et écrous — Embouts tournevis à machine — Partie 3: Embouts tournevis pour vis à six pans creux,2002-08-15,1,['25.140.01'],ISO/TC 29/SC 10,9599,"[8260,26667]",[61604],"['en','fr']",5,"

ISO 2351-3 prescribes the technical specifications for machine-operated screwdriver bits for hexagon socket screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to tips for screwdrivers as defined in ISO 2936.

It gives also recommended combinations between tips and b Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2352:1982 - **Identifier:** ISO 2352:1982 _(verified: appears in the quote below)_ - **Item title:** Spiral ratchet screwdriver ends _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2352:2000 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 7193,IS,,ISO 2352:1982,Spiral ratchet screwdriver ends,Entraînement pour tournevis automatiques,1982-12-01,2,['25.140.30'],ISO/TC 29/SC 10,9599,,[29927],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23529:2004 - **Identifier:** ISO 23529:2004 _(verified: appears in the quote below)_ - **Item title:** Rubber — General procedures for preparing and conditioning test pieces for physical test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23529:2010 - **Withdrawn / published date:** 2004-09-07 _(verified: appears in the quote below)_ > 36888,IS,,ISO 23529:2004,Rubber — General procedures for preparing and conditioning test pieces for physical test methods,Caoutchouc — Procédures générales pour la préparation et le conditionnement des éprouvettes pour les méthodes d'essais physiques,2004-09-07,1,['83.060'],ISO/TC 45/SC 2,9599,"[10611,2230,20168,8675]",[50758],"['en','fr']",15,"

ISO 23529:2004 specifies conditions and procedures for the preparation, measurement, marking, storage and conditioning of rubber test pieces for use in physical tests specified in other International Standards, and the preferred conditions to be used during the tests. Special conditions applicable to a particular test or material or simulating a pa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23529:2010 - **Identifier:** ISO 23529:2010 _(verified: appears in the quote below)_ - **Item title:** Rubber — General procedures for preparing and conditioning test pieces for physical test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23529:2016 - **Withdrawn / published date:** 2010-10-22 _(verified: appears in the quote below)_ > 50758,IS,,ISO 23529:2010,Rubber — General procedures for preparing and conditioning test pieces for physical test methods,Caoutchouc — Procédures générales pour la préparation et le conditionnement des éprouvettes pour les méthodes d'essais physiques,2010-10-22,2,['83.060'],ISO/TC 45/SC 2,9599,[36888],[70323],"['en','fr','ru']",16,"

ISO 23529:2010 specifies general procedures for the preparation, measurement, marking, storage, and conditioning of rubber test pieces for use in physical tests specified in other International Standards, and the preferred conditions to be used during the tests. Special conditions, applicable to a particular test or material or simulating a particular climatic Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23537-1:2016 - **Identifier:** ISO 23537-1:2016 _(verified: appears in the quote below)_ - **Item title:** Requirements for sleeping bags — Part 1: Thermal and dimensional requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23537-1:2022 | ISO/PWI 23537-1 - **Withdrawn / published date:** 2016-09-30 _(verified: appears in the quote below)_ > 67105,IS,,ISO 23537-1:2016,Requirements for sleeping bags — Part 1: Thermal and dimensional requirements,Exigences pour les sacs de couchage — Partie 1: Exigences thermiques et dimensionnelles,2016-09-30,1,['97.200.30'],ISO/TC 83,9599,,"[82789,73880]","['en','fr']",21,"

ISO 23537-1:2016 specifies the requirements and test methods as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.

ISO 23537-1:2016 does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.

NOTE 1 No prediction model exists for th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23537-1:2016/Amd 1:2018 - **Identifier:** ISO 23537-1:2016/Amd 1:2018 _(verified: appears in the quote below)_ - **Item title:** Requirements for sleeping bags — Part 1: Thermal and dimensional requirements — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23537-1:2022 | ISO/PWI 23537-1 - **Withdrawn / published date:** 2018-01-08 _(verified: appears in the quote below)_ > 73657,IS,Amd,ISO 23537-1:2016/Amd 1:2018,Requirements for sleeping bags — Part 1: Thermal and dimensional requirements — Amendment 1,Exigences pour les sacs de couchage — Partie 1: Exigences thermiques et dimensionnelles — Amendement 1,2018-01-08,1,['97.200.30'],ISO/TC 83,9599,,"[82789,73880]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23537-2:2016 - **Identifier:** ISO 23537-2:2016 _(verified: appears in the quote below)_ - **Item title:** Requirements for sleeping bags — Part 2: Fabric and material properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23537-2:2023 | ISO/PWI 23537-2 - **Withdrawn / published date:** 2016-09-30 _(verified: appears in the quote below)_ > 67112,IS,,ISO 23537-2:2016,Requirements for sleeping bags — Part 2: Fabric and material properties,Exigences pour les sacs de couchage — Partie 2: Propriétés de l'étoffe et des matières,2016-09-30,1,['97.200.30'],ISO/TC 83,9599,,"[82790,73881]","['en','fr']",6,"

ISO 23537-2:2016 specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities. Thermal and dimensional requirements are specified in ISO 23537‑1.

ISO 23537-2:2016 does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23539:2005 - **Identifier:** ISO 23539:2005 _(verified: appears in the quote below)_ - **Item title:** Photometry — The CIE system of physical photometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CIE 23539:2023 - **Withdrawn / published date:** 2005-07-26 _(verified: appears in the quote below)_ > 41641,IS,,ISO 23539:2005,Photometry — The CIE system of physical photometry,Photométrie — Le système CIE de photométrie physique,2005-07-26,1,['17.180.01'],CIE,9599,,[83178],"['en','fr']",18,"

ISO 23539:2005 specifies the characteristics of the system of physical photometry established by the CIE and accepted as the basis for the measurement of light. It defines the photometric quantities, units and standards that make up the CIE system of physical photometry and that have been officially accepted by the Comité International des Poids et Mesures (CIPM).

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23550:2004 - **Identifier:** ISO 23550:2004 _(verified: appears in the quote below)_ - **Item title:** Safety and control devices for gas burners and gas-burning appliances — General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23550:2011 - **Withdrawn / published date:** 2004-10-01 _(verified: appears in the quote below)_ > 36890,IS,,ISO 23550:2004,Safety and control devices for gas burners and gas-burning appliances — General requirements,Dispositifs de commande et de sécurité pour brûleurs à gaz et appareils à gaz — Exigences générales,2004-10-01,1,['27.060.20'],ISO/TC 161,9599,,[57045],"['en','fr']",37,"

ISO 23550:2004 specifies safety, constructional and performance requirements and testing of safety control or regulating devices and sub-assemblies or fittings (hereafter referred to as controls) for burners and gas-burning appliances using fuel gases as natural gas, manufactured gas or liquefied petroleum gas (LPG). It is not applicable to corrosive and waste gases.

ISO 23550:2004 is applicable to t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23550:2011 - **Identifier:** ISO 23550:2011 _(verified: appears in the quote below)_ - **Item title:** Safety and control devices for gas burners and gas-burning appliances — General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23550:2018 - **Withdrawn / published date:** 2011-03-10 _(verified: appears in the quote below)_ > 57045,IS,,ISO 23550:2011,Safety and control devices for gas burners and gas-burning appliances — General requirements,Dispositifs de commande et de sécurité pour brûleurs à gaz et appareils à gaz — Exigences générales,2011-03-10,2,['27.060.20'],ISO/TC 161,9599,"[51636,36890]",[60451],"['en','fr']",41,"

ISO 23550:2011 specifies safety, constructional and performance requirements and testing of safety control or regulating devices and sub-assemblies or fittings for burners and gas-burning appliances using such fuel gases as natural gas, manufactured gas or liquefied petroleum gas (LPG). It is not applicable to corrosive and waste gases.

ISO 23550:2011 is applicable to the following con Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23550:2011/Amd 1:2015 - **Identifier:** ISO 23550:2011/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Safety and control devices for gas burners and gas-burning appliances — General requirements — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23550:2018 - **Withdrawn / published date:** 2015-11-03 _(verified: appears in the quote below)_ > 61951,IS,Amd,ISO 23550:2011/Amd 1:2015,Safety and control devices for gas burners and gas-burning appliances — General requirements — Amendment 1,Dispositifs de commande et de sécurité pour brûleurs à gaz et appareils à gaz — Exigences générales — Amendement 1,2015-11-03,2,['27.060.20'],ISO/TC 161,9599,,[60451],['en'],7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23551-1:2006 - **Identifier:** ISO 23551-1:2006 _(verified: appears in the quote below)_ - **Item title:** Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23551-1:2012 - **Withdrawn / published date:** 2006-06-28 _(verified: appears in the quote below)_ > 36891,IS,,ISO 23551-1:2006,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic valves,Dispositifs de commande et de sécurité pour brûleurs à gaz et appareils à gaz — Exigences particulières — Partie 1: Robinets automatiques,2006-06-28,1,['27.060.20'],ISO/TC 161,9599,,[54346],['en'],18,"

ISO 23551-1:2006 specifies safety, constructional and performance requirements and testing of automatic valves (hereafter referred to as valves) for gas burners, gas appliances and similar use.

ISO 23551-1:2006 covers type testing only.

ISO 23551-1:2006 applies to valves with declared maximum working pressures up to and including 5 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 23551-1:2012 - **Identifier:** ISO 23551-1:2012 _(verified: appears in the quote below)_ - **Item title:** Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23551-1:2024 | ISO/DIS 23551-1 - **Withdrawn / published date:** 2012-08-08 _(verified: appears in the quote below)_ > 54346,IS,,ISO 23551-1:2012,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves,Dispositifs de commande et de sécurité pour brûleurs à gaz et appareils à gaz — Exigences particulières — Partie 1: Robinets automatiques et semi-automatiques,2012-08-08,2,['27.060.20'],ISO/TC 161,9599,[36891],"[83847,75139]",['en'],37,"

ISO 23551-1:2012 specifies safety, constructional and performance requirements and testing of automatic and semi-automatic shut-off valves for gas burners, gas appliances and appliances of similar use.

It applies to