This document specifies the requirements for safe commercial UAS operations.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21384-4:2020 - **Identifier:** ISO 21384-4:2020 _(verified: appears in the quote below)_ - **Item title:** Unmanned aircraft systems — Part 4: Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21384-4:2025 - **Withdrawn / published date:** 2020-05-26 _(verified: appears in the quote below)_ > 76785,IS,,ISO 21384-4:2020,Unmanned aircraft systems — Part 4: Vocabulary,Aéronefs sans pilote — Partie 4: Vocabulaire,2020-05-26,1,"['49.020','01.040.49']",ISO/TC 20/SC 16,9599,,[85053],['en'],10,This document defines terms and definitions relating to unmanned aircraft systems that are widely used in science and technology.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21398:2007 - **Identifier:** ISO 21398:2007 _(verified: appears in the quote below)_ - **Item title:** Hard coal and coke — Guidance to the inspection of mechanical sampling systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21398:2019 - **Withdrawn / published date:** 2007-05-31 _(verified: appears in the quote below)_ > 40209,IS,,ISO 21398:2007,Hard coal and coke — Guidance to the inspection of mechanical sampling systems,Houille et coke — Lignes directrices pour l'inspection des systèmes d'échantillonnage mécanique,2007-05-31,1,"['73.040','75.160.10']",ISO/TC 27/SC 4,9599,,[75342],['en'],25,"ISO 21398:2007 sets out recommended practices for the inspection of mechanical sampling systems. ISO 21398:2007 serves as a reference for conformance with applicable ISO/TC 27 International Standards.
ISO 21398:2007 covers general considerations including precision, mineral variability and bias, establishment of inspection systems and inspection procedure.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21415-2:2006 - **Identifier:** ISO 21415-2:2006 _(verified: appears in the quote below)_ - **Item title:** Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten by mechanical means _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21415-2:2015 - **Withdrawn / published date:** 2006-11-08 _(verified: appears in the quote below)_ > 37804,IS,,ISO 21415-2:2006,Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten by mechanical means,Blé et farines de blé — Teneur en gluten — Partie 2: Détermination du gluten humide par des moyens mécaniques,2006-11-08,1,['67.060'],ISO/TC 34/SC 4,9599,"[14249,11594]",[62221],"['en','fr','ru']",11,"ISO 21415-2:2006 specifies a method for the determination of the wet gluten content of wheat flour (Triticum aestivum L. and Triticum durum Desf.) by mechanical means. This method is directly applicable to flour. It is also applicable to semolina and wheat after grinding, if their particle size distribution meets the specification given.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21415-2:2015 - **Identifier:** ISO 21415-2:2015 _(verified: appears in the quote below)_ - **Item title:** Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21415-2:2026 - **Withdrawn / published date:** 2015-09-30 _(verified: appears in the quote below)_ > 62221,IS,,ISO 21415-2:2015,Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means,Blé et farines de blé — Teneur en gluten — Partie 2: Détermination du gluten humide et du gluten index par des moyens mécaniques,2015-09-30,2,['67.060'],ISO/TC 34/SC 4,9599,[37804],[91312],"['en','fr']",15,"ISO 21415-2:2015 specifies a method for determining the content of wet gluten and the gluten index for wheat flours (Triticum aestivum L. and Triticum durum Desf.) by mechanical means. This method is directly applicable to flours. It also applies to common and durum wheat after grinding, if their particular size distribution meets the specificatio Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2143:1981 - **Identifier:** ISO 2143:1981 _(verified: appears in the quote below)_ - **Item title:** Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxide coatings after sealing — Dye spot test with prior acid treatment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 2143 | ISO 2143:2010 - **Withdrawn / published date:** 1981-08-01 _(verified: appears in the quote below)_ > 6934,IS,,ISO 2143:1981,Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxide coatings after sealing — Dye spot test with prior acid treatment,Anodisation de l'aluminium et de ses alliages — Appréciation de la perte du pouvoir absorbant des couches d'oxydes anodiques après colmatage — Essai à la goutte de colorant avec action acide préalable,1981-08-01,1,['25.220.20'],ISO/TC 79/SC 2,9599,,"[1276,51486]","['en','fr']",3,"
The resistance of anodic oxide coatings to absorption of dyes may give information on the quality of sealing. The method is applicable to anodic oxide coatings to be subjected to weathering or to aggressive environments and, in all c Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2143:2010 - **Identifier:** ISO 2143:2010 _(verified: appears in the quote below)_ - **Item title:** Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2143:2017 - **Withdrawn / published date:** 2010-06-14 _(verified: appears in the quote below)_ > 51486,IS,,ISO 2143:2010,Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment,Anodisation de l'aluminium et de ses alliages — Appréciation de la perte du pouvoir absorbant des couches anodiques après colmatage — Essai à la goutte de colorant avec action acide préalable,2010-06-14,2,['25.220.20'],ISO/TC 79/SC 2,9599,[6934],[70154],"['en','fr']",5,"
ISO 2143:2010 specifies a method of estimating the loss of absorptive power of anodic oxidation coatings that have undergone a sealing treatment, by dye absorption after acid pretreatment.
The method is suitable for use as a product Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21433:2018 - **Identifier:** ISO 21433:2018 _(verified: appears in the quote below)_ - **Item title:** Plain bearings — Handling of plain bearings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21433:2025 - **Withdrawn / published date:** 2018-10-15 _(verified: appears in the quote below)_ > 70917,IS,,ISO 21433:2018,Plain bearings — Handling of plain bearings,Paliers lisses — Manipulation des paliers lisses,2018-10-15,1,['21.100.10'],ISO/TC 123/SC 6,9599,,[89840],['en'],9,"
This document specifies requirements and guidance on the storage, transportation, handling, installation, operation and replacement of plain bearings and related parts.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21438-1:2007 - **Identifier:** ISO 21438-1:2007 _(verified: appears in the quote below)_ - **Item title:** Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 1: Non-volatile acids (sulfuric acid and phosphoric acid) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21438-1:2022 - **Withdrawn / published date:** 2007-12-10 _(verified: appears in the quote below)_ > 40239,IS,,ISO 21438-1:2007,Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 1: Non-volatile acids (sulfuric acid and phosphoric acid),Air des lieux de travail — Détermination des acides inorganiques par chromatographie ionique — Partie 1: Acides non volatils (acide sulfurique et acide phosphorique),2007-12-10,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[72921],"['en','fr']",29,"ISO 21438-1:2007 specifies a method for the determination of the time-weighted average mass concentration of sulfuric acid and phosphoric acid in workplace air by ion chromatography.
The method is applicable to the personal sampling of the inhalable fraction of airborne particle Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21438-2:2009 - **Identifier:** ISO 21438-2:2009 _(verified: appears in the quote below)_ - **Item title:** Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21438-2:2024 - **Withdrawn / published date:** 2009-12-04 _(verified: appears in the quote below)_ > 43381,IS,,ISO 21438-2:2009,"Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)","Air des lieux de travail — Détermination des acides inorganiques par chromatographie ionique — Partie 2: Acides volatils, sauf acide fluorhydrique (acide chlorhydrique, acide bromhydrique et acide nitrique)",2009-12-04,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[83299],"['en','fr']",29,"
ISO 21438-2:2009 specifies a method for the determination of the time-weighted average mass concentration of hydrogen chloride (HCl) gas and hydrochloric acid mist, hydrogen bromide (HBr) vapour and h Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21438-3:2010 - **Identifier:** ISO 21438-3:2010 _(verified: appears in the quote below)_ - **Item title:** Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21438-3:2026 - **Withdrawn / published date:** 2010-07-30 _(verified: appears in the quote below)_ > 45768,IS,,ISO 21438-3:2010,Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides,Air des lieux de travail — Détermination des acides inorganiques par chromatographie ionique — Partie 3: Acide fluorhydrique et fluorures particulaires,2010-07-30,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[85691],"['en','fr']",29,"
ISO 21438-3:2010 specifies a method for the determination of the time-weighted average mass concentration of soluble particulate fluorides and hydrofluoric acid (HF) in workplace air by collection of the particulate fluorides on a pre-filter and HF on an alkali-impregnated filter and analysis by ion chromatog Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2144:1983 - **Identifier:** ISO 2144:1983 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of ash _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2144:1987 - **Withdrawn / published date:** 1983-05-01 _(verified: appears in the quote below)_ > 6935,IS,,ISO 2144:1983,Paper and board — Determination of ash,Papiers et cartons — Détermination des cendres,1983-05-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[6936],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2144:1987 - **Identifier:** ISO 2144:1987 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of ash _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2144:1997 - **Withdrawn / published date:** 1987-12-10 _(verified: appears in the quote below)_ > 6936,IS,,ISO 2144:1987,Paper and board — Determination of ash,Papiers et cartons — Détermination des cendres,1987-12-10,3,['85.060'],ISO/TC 6/SC 2,9599,[6935],[25911],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2144:1997 - **Identifier:** ISO 2144:1997 _(verified: appears in the quote below)_ - **Item title:** Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2144:2015 - **Withdrawn / published date:** 1997-12-18 _(verified: appears in the quote below)_ > 25911,IS,,ISO 2144:1997,"Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C","Papiers, cartons et pâtes — Détermination du résidu (cendres) après incinération à 900 degrés C",1997-12-18,4,['85.060'],ISO/TC 6,9599,[6936],[66536],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2144:2015 - **Identifier:** ISO 2144:2015 _(verified: appears in the quote below)_ - **Item title:** Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2144:2019 - **Withdrawn / published date:** 2015-05-11 _(verified: appears in the quote below)_ > 66536,IS,,ISO 2144:2015,"Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C","Papiers, cartons et pâtes — Détermination du résidu (cendres) après incinération à 900 degrés C",2015-05-11,5,['85.060'],ISO/TC 6,9599,[25911],[73415],"['en','fr']",6,"
ISO 2144:2015 describes the determination of the residue on ignition of pulps, papers, and boards. The International Standard is applicable to all types of pulp, paper, and board. The lower limit of the determination is about 0,2 %.
NOTE The procedure (Clause 7) requires that at least 10 mg of residue is weighed. The limit stated above corresponds to a 5 g sample. If the sample size is increased, th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21459:2006 - **Identifier:** ISO 21459:2006 _(verified: appears in the quote below)_ - **Item title:** Space data and information transfer systems — Proximity-1 space link protocol — Coding and synchronization sublayer _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21459:2015 - **Withdrawn / published date:** 2006-07-05 _(verified: appears in the quote below)_ > 40247,IS,,ISO 21459:2006,Space data and information transfer systems — Proximity-1 space link protocol — Coding and synchronization sublayer,Systèmes de transfert des informations et données spatiales — Protocole pour liaisons spatiales de proximité 1 — Sous-couche de codage et synchronisation,2006-07-05,1,['49.140'],ISO/TC 20/SC 13,9599,,[67093],['en'],25,"
Proximity space links are defined to be short-range, bi-directional, fixed or mobile radio links, generally used to communicate among probes, landers, rovers, orbiting constellations, and orbiting relays. These links are characterized by short time delays, moderate (not weak) signals, and short, independent sessions.
ISO 21459:20 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2146:1972 - **Identifier:** ISO 2146:1972 _(verified: appears in the quote below)_ - **Item title:** Directories of libraries, information and documentation centres _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2146:1988 - **Withdrawn / published date:** 1972-01-01 _(verified: appears in the quote below)_ > 6938,IS,,ISO 2146:1972,"Directories of libraries, information and documentation centres","Répertoires de bibliothèques, de centres d'information et de documentation",1972-01-01,1,['01.140.20'],ISO/TC 46,9599,,[6939],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2146:1988 - **Identifier:** ISO 2146:1988 _(verified: appears in the quote below)_ - **Item title:** Documentation — Directories of libraries, archives, information and documentation centres, and their data bases _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 2146 | ISO 2146:2010 - **Withdrawn / published date:** 1988-07-07 _(verified: appears in the quote below)_ > 6939,IS,,ISO 2146:1988,"Documentation — Directories of libraries, archives, information and documentation centres, and their data bases","Documentation — Répertoires de bibliothèques, d'archives, de centres d'information et de documentation et de leurs bases de données",1988-07-07,2,['01.140.20'],ISO/TC 46/SC 4,9599,[6938],"[32497,44936]","['en','fr']",24, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21460:2006 - **Identifier:** ISO 21460:2006 _(verified: appears in the quote below)_ - **Item title:** Space data and information transfer systems — Proximity-1 space link protocol — Physical layer _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21460:2007 - **Withdrawn / published date:** 2006-07-13 _(verified: appears in the quote below)_ > 40248,IS,,ISO 21460:2006,Space data and information transfer systems — Proximity-1 space link protocol — Physical layer,Systèmes de transfert des informations et données spatiales — Protocole pour liaisons spatiales de proximité 1 — Couche physique,2006-07-13,1,['49.140'],ISO/TC 20/SC 13,9599,,[44999],['en'],24,"
Proximity space links are defined to be short-range, bi-directional, fixed or mobile radio links, generally used to communicate among probes, landers, rovers, orbiting constellations, and orbiting relays. These links are characterized by short time delays, moderate (not weak) signals, and short, independent sessions.
ISO 21460:2006 defines the Proximity-1 space link protocol Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21460:2007 - **Identifier:** ISO 21460:2007 _(verified: appears in the quote below)_ - **Item title:** Space data and information transfer systems — Proximity-1 space link protocol — Physical layer _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21460:2015 - **Withdrawn / published date:** 2007-10-10 _(verified: appears in the quote below)_ > 44999,IS,,ISO 21460:2007,Space data and information transfer systems — Proximity-1 space link protocol — Physical layer,Systèmes de transfert des informations et données spatiales — Protocole pour liaisons spatiales de proximité 1 — Couche physique,2007-10-10,2,['49.140'],ISO/TC 20/SC 13,9599,[40248],[67092],['en'],35,"
ISO 21460:2007 defines the Proximity-1 space link protocol physical layer. It specifies the channel connection process, provision for frequency bands and assignments, hailing channel, polarization, modulation, data rates, and performance requirements. Currently, the physical layer only defines operations at UHF frequencies for the Mars environment. The coding layer is defin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21461:2006 - **Identifier:** ISO 21461:2006 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21461:2009 - **Withdrawn / published date:** 2006-03-24 _(verified: appears in the quote below)_ > 40249,IS,,ISO 21461:2006,Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds,Caoutchouc — Détermination de l'aromaticité des huiles dans les mélanges vulcanisés,2006-03-24,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[53355],['en'],8,
ISO 21461:2006 provides a method for the selective determination of polyaromaticity of oil in vulcanized rubber compounds. The method is based on nuclear magnetic resonance (NMR) spectrometry.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21461:2009 - **Identifier:** ISO 21461:2009 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21461:2012 - **Withdrawn / published date:** 2009-02-24 _(verified: appears in the quote below)_ > 53355,IS,,ISO 21461:2009,Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds,Caoutchouc — Détermination de l'aromaticité des huiles dans les mélanges vulcanisés,2009-02-24,2,['83.040.10'],ISO/TC 45/SC 3,9599,"[51181,40249]",[57940],['en'],15,ISO 21461:2009 provides a method for the selective determination of polyaromaticity of oil in vulcanized rubber compounds. The method is based on nuclear magnetic resonance (NMR) spectrometry.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21467:2004 - **Identifier:** ISO 21467:2004 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery — Horizontal directional drills — Terminology and specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21467:2023 - **Withdrawn / published date:** 2004-09-06 _(verified: appears in the quote below)_ > 34546,IS,,ISO 21467:2004,Earth-moving machinery — Horizontal directional drills — Terminology and specifications,Engins de terrassement — Machines de forage à direction horizontale - Terminologie et spécifications,2004-09-06,1,['53.100'],ISO/TC 195/SC 3,9599,,[82062],"['en','fr']",10,"ISO 21467:2004 establishes terminology for horizontal directional drilling machines. It is applicable to non-riding, ride-on, pit-launched and attachment-mounted machines.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21484:2008 - **Identifier:** ISO 21484:2008 _(verified: appears in the quote below)_ - **Item title:** Nuclear fuel technology — Determination of the O/M ratio in MOX pellets — Gravimetric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21484:2017 - **Withdrawn / published date:** 2008-11-11 _(verified: appears in the quote below)_ > 40266,IS,,ISO 21484:2008,Nuclear fuel technology — Determination of the O/M ratio in MOX pellets — Gravimetric method,Technologie du combustible nucléaire — Détermination du rapport O/M dans les pastilles MOX — Méthode gravimétrique,2008-11-11,1,"['17.240','27.120.30']",ISO/TC 85/SC 5,9599,,[63950],"['en','fr']",4,"ISO 21484:2008 describes a method for determining the oxygen-to-metal (O/M) ratio in mixed uranium-plutonium oxide (U,Pu)O2 ± X pellets.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21485:2006 - **Identifier:** ISO 21485:2006 _(verified: appears in the quote below)_ - **Item title:** Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21485:2013 - **Withdrawn / published date:** 2006-11-03 _(verified: appears in the quote below)_ > 40273,IS,,ISO 21485:2006,Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction,Matériel pour l'industrie textile — Cadre pour la filature du coton — Vocabulaire et principes de construction,2006-11-03,1,"['01.040.59','59.120.10']",ISO/TC 72/SC 1,9599,,[60958],['en'],10,"ISO 21485:2006 establishes a vocabulary of terms related to, and the principles of construction for, draw frames and their components, used for cotton spinning in the textile industry.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21487:2006 - **Identifier:** ISO 21487:2006 _(verified: appears in the quote below)_ - **Item title:** Small craft — Permanently installed petrol and diesel fuel tanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21487:2012 - **Withdrawn / published date:** 2006-12-05 _(verified: appears in the quote below)_ > 34550,IS,,ISO 21487:2006,Small craft — Permanently installed petrol and diesel fuel tanks,Petits navires — Réservoirs à carburant à essence et diesel installés à demeure,2006-12-05,1,['47.080'],ISO/TC 188,9599,,[57087],"['en','fr']",8,"ISO 21487:2006 establishes requirements for design and test of petrol and diesel fuel tanks for internal combustion engines that are intended to be permanently installed in small craft of up to 24 m length of hull.
For installation requirements, ISO 10088 applies.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21487:2006/Cor 1:2008 - **Identifier:** ISO 21487:2006/Cor 1:2008 _(verified: appears in the quote below)_ - **Item title:** Small craft — Permanently installed petrol and diesel fuel tanks — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21487:2012 - **Withdrawn / published date:** 2008-12-08 _(verified: appears in the quote below)_ > 52919,IS,Cor,ISO 21487:2006/Cor 1:2008,Small craft — Permanently installed petrol and diesel fuel tanks — Technical Corrigendum 1,Petits navires — Réservoirs à carburant à essence et diesel installés à demeure — Rectificatif technique 1,2008-12-08,1,['47.080'],ISO/TC 188,9599,,[57087],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21487:2012 - **Identifier:** ISO 21487:2012 _(verified: appears in the quote below)_ - **Item title:** Small craft — Permanently installed petrol and diesel fuel tanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21487:2022 - **Withdrawn / published date:** 2012-11-07 _(verified: appears in the quote below)_ > 57087,IS,,ISO 21487:2012,Small craft — Permanently installed petrol and diesel fuel tanks,Petits navires — Réservoirs à carburant à essence et diesel installés à demeure,2012-11-07,2,['47.080'],ISO/TC 188,9599,"[34550,52919]",[76441],"['en','fr']",8,"ISO 21487:2012 establishes requirements for design and test of petrol and diesel fuel tanks for internal combustion engines that are intended to be permanently installed in small craft of up to 24 m length of hull.
For installation requirements, ISO 10088 applies.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21487:2012/Amd 1:2014 - **Identifier:** ISO 21487:2012/Amd 1:2014 _(verified: appears in the quote below)_ - **Item title:** Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21487:2022 - **Withdrawn / published date:** 2014-11-27 _(verified: appears in the quote below)_ > 64508,IS,Amd,ISO 21487:2012/Amd 1:2014,Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 1,Petits navires — Réservoirs à carburant à essence et diesel installés à demeure — Amendement 1,2014-11-27,2,['47.080'],ISO/TC 188,9599,,[76441],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21487:2012/Amd 2:2015 - **Identifier:** ISO 21487:2012/Amd 2:2015 _(verified: appears in the quote below)_ - **Item title:** Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21487:2022 - **Withdrawn / published date:** 2015-11-13 _(verified: appears in the quote below)_ > 67404,IS,Amd,ISO 21487:2012/Amd 2:2015,Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 2,Petits navires — Réservoirs à carburant à essence et diesel installés à demeure — Amendement 2,2015-11-13,2,['47.080'],ISO/TC 188,9599,,[76441],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2149:1975 - **Identifier:** ISO 2149:1975 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 2149-1975 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7149:1982 - **Withdrawn / published date:** 1975-10-01 _(verified: appears in the quote below)_ > 6942,IS,,ISO 2149:1975,Withdrawal of ISO 2149-1975,Annulation de l'ISO 2149-1975,1975-10-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21498-2:2021 - **Identifier:** ISO 21498-2:2021 _(verified: appears in the quote below)_ - **Item title:** Electrically propelled road vehicles — Electrical specifications and tests for voltage class B systems and components — Part 2: Electrical tests for components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21498-2:2024 - **Withdrawn / published date:** 2021-03-23 _(verified: appears in the quote below)_ > 78210,IS,,ISO 21498-2:2021,Electrically propelled road vehicles — Electrical specifications and tests for voltage class B systems and components — Part 2: Electrical tests for components,Véhicules à propulsion electrique — Spécifications et essais electriques pour les systèmes et composants de classe B — Partie 2: Composants et essais electriques,2021-03-23,1,['43.120'],ISO/TC 22/SC 37,9599,,[84542],['en'],48,"This document applies to voltage class B electric propulsion systems and connected auxiliary electric systems of electrically propelled road vehicles. It applies to electric circuits and components in these systems.
This document focuses on the characteristics at the DC voltag Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2150:1975 - **Identifier:** ISO 2150:1975 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 2150-1975 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7149:1982 - **Withdrawn / published date:** 1975-10-01 _(verified: appears in the quote below)_ > 6943,IS,,ISO 2150:1975,Withdrawal of ISO 2150-1975,Annulation de l'ISO 2150-1975,1975-10-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21500:2012 - **Identifier:** ISO 21500:2012 _(verified: appears in the quote below)_ - **Item title:** Guidance on project management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21500:2021 | ISO 21502:2020 - **Withdrawn / published date:** 2012-09-03 _(verified: appears in the quote below)_ > 50003,IS,,ISO 21500:2012,Guidance on project management,Lignes directrices sur le management de projet,2012-09-03,1,['03.100.40'],ISO/TC 258,9599,,"[75704,74947]","['en','es','fr','ru']",36,"
ISO 21500:2012 provides guidance for project management and can be used by any type of organization, including public, private or community organizations, and for any type of project, irrespective of complexity, size or duration.
ISO 21500:2012 provides high-level description of concepts and processes that are considered to form good practice in project management. Projects are placed in the context of programmes and project portfolios, however, ISO 21500:2012 does not provide detailed guidance Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21501-1:2009 - **Identifier:** ISO 21501-1:2009 _(verified: appears in the quote below)_ - **Item title:** Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21501-1:2025 - **Withdrawn / published date:** 2009-05-22 _(verified: appears in the quote below)_ > 42728,IS,,ISO 21501-1:2009,Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer,Détermination de la distribution granulométrique — Méthodes d'interaction lumineuse de particules uniques — Partie 1: Spectromètre d'aérosol en lumière dispersée,2009-05-22,1,['19.120'],ISO/TC 24/SC 4,9599,,[81877],['en'],27,"
ISO 21501-1:2009 specifies characteristics of a light scattering aerosol spectrometer (LSAS) which is used for measuring the size, number concentration and number/size distribution of particles suspended in a gas. The light scattering technique described in this document is based upon single particle measur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21501-2:2007 - **Identifier:** ISO 21501-2:2007 _(verified: appears in the quote below)_ - **Item title:** Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21501-2:2019 | ISO/PWI 21501-2 - **Withdrawn / published date:** 2007-05-07 _(verified: appears in the quote below)_ > 40275,IS,,ISO 21501-2:2007,Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter,Détermination de la distribution granulométrique — Méthodes d'interaction lumineuse de particules uniques — Partie 2: Compteur de particules en suspension dans un liquide en lumière dispersée,2007-05-07,1,['19.120'],ISO/TC 24/SC 4,9599,[21709],"[75048,58071]",['en'],15,"
ISO 21501-2:2007 describes a calibration and verification method for a light scattering liquid-borne particle counter (LSLPC), which is used to measure the size and particle number concentration of particles suspended in liquid. The light scattering meth Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21501-3:2007 - **Identifier:** ISO 21501-3:2007 _(verified: appears in the quote below)_ - **Item title:** Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 21501-3 | ISO 21501-3:2019 - **Withdrawn / published date:** 2007-05-07 _(verified: appears in the quote below)_ > 40276,IS,,ISO 21501-3:2007,Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter,Détermination de la distribution granulométrique — Méthodes d'interaction lumineuse de particules uniques — Partie 3: Compteur de particules en suspension dans un liquide par extinction de la lumière,2007-05-07,1,['19.120'],ISO/TC 24/SC 4,9599,[21709],"[58072,75049]",['en'],12,"
ISO 21501-3:2007 describes a calibration and verification method for a light extinction liquid-borne particle counter (LELPC), which is used to measure the size and particle number concentration of particles suspended in liquid. The light extinct Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21501-4:2007 - **Identifier:** ISO 21501-4:2007 _(verified: appears in the quote below)_ - **Item title:** Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21501-4:2018 - **Withdrawn / published date:** 2007-05-07 _(verified: appears in the quote below)_ > 40274,IS,,ISO 21501-4:2007,Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces,Détermination de la distribution granulométrique — Méthodes d'interaction lumineuse de particules uniques — Partie 4: Compteur de particules en suspension dans l'air en lumière dispersée pour espaces propres,2007-05-07,1,['19.120'],ISO/TC 24/SC 4,9599,[21709],[58073],['en'],16,"
ISO 21501-4:2007 describes a calibration and verification method for a light scattering airborne particle counter (LSAPC), which is used to measure the size and particle number concentration of particles suspended in air. The light s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21503:2017 - **Identifier:** ISO 21503:2017 _(verified: appears in the quote below)_ - **Item title:** Project, programme and portfolio management — Guidance on programme management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21503:2022 - **Withdrawn / published date:** 2017-09-13 _(verified: appears in the quote below)_ > 66680,IS,,ISO 21503:2017,"Project, programme and portfolio management — Guidance on programme management","Management de projets, programmes et portefeuilles — Recommandations sur le management de programmes",2017-09-13,1,['03.100.01'],ISO/TC 258,9599,,[82868],"['en','fr']",15,"
ISO 21503:2017 provides guidance on programme management. This document is applicable to any type of organization including public or private and any size or sector, as well as any type of programme in terms of complexity.
ISO 21503:2017 provides high-level descriptions of relevant terms, definitions, concepts, prerequisites and practices, including roles and responsibilities that form good practice in progra Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21504:2015 - **Identifier:** ISO 21504:2015 _(verified: appears in the quote below)_ - **Item title:** Project, programme and portfolio management — Guidance on portfolio management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21504:2022 - **Withdrawn / published date:** 2015-07-01 _(verified: appears in the quote below)_ > 61518,IS,,ISO 21504:2015,"Project, programme and portfolio management — Guidance on portfolio management","Management de projets, programmes et portefeuilles — Recommandations sur le management de portefeuilles",2015-07-01,1,['03.100.01'],ISO/TC 258,9599,,[82867],"['en','fr']",13,"
ISO 21504:2015 provides guidance on the principles of project and programme portfolio management. ISO 21504:2015 is relevant to any type of organization including public or private and any size organization or sector.
The guidance presented in ISO 21504:2015 is intended to be adapted to suit the specific environment of the project and programme portfolio.
ISO 21504:2015 does not provide guidance on p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21507:2005 - **Identifier:** ISO 21507:2005 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery — Performance requirements for non-metallic fuel tanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21507:2010 - **Withdrawn / published date:** 2005-11-23 _(verified: appears in the quote below)_ > 23780,IS,,ISO 21507:2005,Earth-moving machinery — Performance requirements for non-metallic fuel tanks,Engins de terrassement — Exigences de performance pour les réservoirs de carburant non métalliques,2005-11-23,1,['53.100'],ISO/TC 127/SC 1,9599,,[45468],"['en','fr']",4,
ISO 21507:2005 describes the performance requirements for non-metallic fuel tanks used in earth-moving machinery as defined in ISO 6165.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21508:2018 - **Identifier:** ISO 21508:2018 _(verified: appears in the quote below)_ - **Item title:** Earned value management in project and programme management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21508:2026 - **Withdrawn / published date:** 2018-04-25 _(verified: appears in the quote below)_ > 63582,IS,,ISO 21508:2018,Earned value management in project and programme management,Management de la valeur acquise en management de projet et de programme,2018-04-25,1,['03.100.40'],ISO/TC 258,9599,,[87899],"['en','fr']",25,"ISO 21508:2018 provides guidance for practices of earned value management in project and programme management. It is applicable to any type of organization including public or private and any size or sector, as well as any type of project or programme in terms of complexity, size or duration.
ISO 21508:2018 provides the following:
a) terms and definitions;
b) descriptions of the purpose and benefits of earned value management;
c) the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2151:1972 - **Identifier:** ISO 2151:1972 _(verified: appears in the quote below)_ - **Item title:** Measurement of airborne noise emitted by compressor/primemover-units intended for outdoor use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2151:2004 - **Withdrawn / published date:** 1972-06-01 _(verified: appears in the quote below)_ > 6944,IS,,ISO 2151:1972,Measurement of airborne noise emitted by compressor/primemover-units intended for outdoor use,Mesure du bruit aérien émis par des groupes moto-compresseurs destinés à être utilisés à l'extérieur,1972-06-01,1,"['23.140','17.140.20']",ISO/TC 118/SC 6,9599,,[31316],"['en','fr']",7,
Specifies a method of determining the airborne sound and gives precise instructions for conducting the tests and reporting the results. An annex contains a format with tables for test report. Three figures illustrate the description.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21528-1:2004 - **Identifier:** ISO 21528-1:2004 _(verified: appears in the quote below)_ - **Item title:** Microbiology of food and animal feeding stuffs — Horizontal methods for the detection and enumeration of Enterobacteriaceae — Part 1: Detection and enumeration by MPN technique with pre-enrichment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21528-1:2017 - **Withdrawn / published date:** 2004-08-16 _(verified: appears in the quote below)_ > 34565,IS,,ISO 21528-1:2004,Microbiology of food and animal feeding stuffs — Horizontal methods for the detection and enumeration of Enterobacteriaceae — Part 1: Detection and enumeration by MPN technique with pre-enrichment,Microbiologie des aliments — Méthodes horizontales pour la recherche et le dénombrement des Enterobacteriaceae — Partie 1: Recherche et dénombrement à l'aide de la technique NPP avec préenrichissement,2004-08-16,1,['07.100.01'],ISO/TC 34/SC 9,9599,"[11619,15749,14123]",[55228],"['en','fr']",12,"ISO 21528-1:2004 specifies a method, with pre-enrichment, for the detection of Enterobacteriaceae. It is applicable to products intended for human consumption and the feeding of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21528-2:2004 - **Identifier:** ISO 21528-2:2004 _(verified: appears in the quote below)_ - **Item title:** Microbiology of food and animal feeding stuffs — Horizontal methods for the detection and enumeration of Enterobacteriaceae — Part 2: Colony-count method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21528-2:2017 | ISO/WD 21528-2 - **Withdrawn / published date:** 2004-08-16 _(verified: appears in the quote below)_ > 34566,IS,,ISO 21528-2:2004,Microbiology of food and animal feeding stuffs — Horizontal methods for the detection and enumeration of Enterobacteriaceae — Part 2: Colony-count method,Microbiologie des aliments — Méthodes horizontales pour la recherche et le dénombrement des Enterobacteriaceae — Partie 2: Méthode par comptage des colonies,2004-08-16,1,['07.100.30'],ISO/TC 34/SC 9,9599,"[11619,15749,14123]","[63504,55229]","['en','fr']",10,"
ISO 21528-2:2004 specifies a method, without pre-enrichment, for the enumeration of Enterobacteriaceae. It is applicable to products intended for human consumption and the feeding of animals, and environmental samples in the area of food production and foo Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21533:2003 - **Identifier:** ISO 21533:2003 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Reusable cartridge syringes intended for intraligamentary injections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21533:2018 - **Withdrawn / published date:** 2003-06-11 _(verified: appears in the quote below)_ > 34574,IS,,ISO 21533:2003,Dentistry — Reusable cartridge syringes intended for intraligamentary injections,Art dentaire — Seringues à cartouche réutilisables pour injections intraligamentaires,2003-06-11,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[70318],"['en','fr']",6,"
ISO 21533:2003 specifies requirements and test methods for reusable cartridge syringes intended for intraligamentary injections.
It specifies requirements for dental cartridge syringes only with ISO metric thread sizes, and only intended for intraligamentary injections. However, imperial thread sizes are considered in an informative annex.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21533:2003/Cor 1:2009 - **Identifier:** ISO 21533:2003/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Reusable cartridge syringes intended for intraligamentary injections — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21533:2018 - **Withdrawn / published date:** 2009-12-03 _(verified: appears in the quote below)_ > 55598,IS,Cor,ISO 21533:2003/Cor 1:2009,Dentistry — Reusable cartridge syringes intended for intraligamentary injections — Technical Corrigendum 1,Art dentaire — Seringues à cartouche réutilisables pour injections intraligamentaires — Rectificatif technique 1,2009-12-03,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[70318],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21534:2002 - **Identifier:** ISO 21534:2002 _(verified: appears in the quote below)_ - **Item title:** Non-active surgical implants — Joint replacement implants — Particular requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21534:2007 - **Withdrawn / published date:** 2002-11-08 _(verified: appears in the quote below)_ > 34575,IS,,ISO 21534:2002,Non-active surgical implants — Joint replacement implants — Particular requirements,Implants chirurgicaux non actifs — Implants de remplacement d'articulation — Exigences particulières,2002-11-08,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[39024],"['en','fr']",12,"This International Standard specifies particular requirements for total and partial joint replacement implants, artificial ligaments and bone cement, hereafter referred to as implants. For the purposes of this International Standard, artificial ligaments and their associated fixing devices are included in the term implant, hereinafter referred to as implants.
It specifies requirements for intended perfo Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21535:2002 - **Identifier:** ISO 21535:2002 _(verified: appears in the quote below)_ - **Item title:** Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21535:2007 - **Withdrawn / published date:** 2002-11-08 _(verified: appears in the quote below)_ > 34576,IS,,ISO 21535:2002,Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants,Implants chirurgicaux non actifs — Implants de remplacement d'articulation — Exigences spécifiques relatives aux implants de remplacement de l'articulation de la hanche,2002-11-08,1,['11.040.30'],ISO/TC 150/SC 4,9599,,[40372],"['en','fr']",11,"
This International Standard provides specific requirements for hip-joint replacement implants.
With regard to safety, this International Standard gives requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging and information supplied by Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21535:2007 - **Identifier:** ISO 21535:2007 _(verified: appears in the quote below)_ - **Item title:** Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21535:2023 - **Withdrawn / published date:** 2007-09-26 _(verified: appears in the quote below)_ > 40372,IS,,ISO 21535:2007,Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants,Implants chirurgicaux non actifs — Implants de remplacement d'articulation — Exigences spécifiques relatives aux implants de remplacement de l'articulation de la hanche,2007-09-26,2,['11.040.40'],ISO/TC 150/SC 4,9599,[34576],[77044],"['en','fr','ru']",9,"
ISO 21535:2007 provides specific requirements for hip joint replacement implants. With regard to safety, this International Standard specifies requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging, information supplied by the ma Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21535:2007/Amd 1:2016 - **Identifier:** ISO 21535:2007/Amd 1:2016 _(verified: appears in the quote below)_ - **Item title:** Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21535:2023 - **Withdrawn / published date:** 2016-11-16 _(verified: appears in the quote below)_ > 67926,IS,Amd,ISO 21535:2007/Amd 1:2016,Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants — Amendment 1,Implants chirurgicaux non actifs — Implants de remplacement d'articulation — Exigences spécifiques relatives aux implants de remplacement de l'articulation de la hanche — Amendement 1,2016-11-16,2,['11.040.40'],ISO/TC 150/SC 4,9599,,[77044],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21536:2002 - **Identifier:** ISO 21536:2002 _(verified: appears in the quote below)_ - **Item title:** Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21536:2007 - **Withdrawn / published date:** 2002-11-08 _(verified: appears in the quote below)_ > 34577,IS,,ISO 21536:2002,Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants,Implants chirurgicaux non actifs — Implants de remplacement d'articulation — Exigences spécifiques relatives aux implants de remplacement de l'articulation du genou,2002-11-08,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[40373],"['en','fr']",6,"
This International Standard provides specific requirements for knee-joint replacement implants.
With regard to safety, this International Standard gives requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging and information supplied by th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21536:2007 - **Identifier:** ISO 21536:2007 _(verified: appears in the quote below)_ - **Item title:** Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21536:2023 - **Withdrawn / published date:** 2007-09-26 _(verified: appears in the quote below)_ > 40373,IS,,ISO 21536:2007,Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants,Implants chirurgicaux non actifs — Implants de remplacement d'articulation — Exigences spécifiques relatives aux implants de remplacement de l'articulation du genou,2007-09-26,2,['11.040.40'],ISO/TC 150/SC 4,9599,[34577],[77045],"['en','fr','ru']",5,"
ISO 21536:2007 provides specific requirements for knee joint replacement implants. With regard to safety, this International Standard specifies requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging, information supplied by the manu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21536:2007/Amd 1:2014 - **Identifier:** ISO 21536:2007/Amd 1:2014 _(verified: appears in the quote below)_ - **Item title:** Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21536:2023 - **Withdrawn / published date:** 2014-02-24 _(verified: appears in the quote below)_ > 59677,IS,Amd,ISO 21536:2007/Amd 1:2014,Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants — Amendment 1,Implants chirurgicaux non actifs — Implants de remplacement d'articulation — Exigences spécifiques relatives aux implants de remplacement de l'articulation du genou — Amendement 1,2014-02-24,2,['11.040.40'],ISO/TC 150/SC 4,9599,,[77045],"['en','fr','ru']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21538:2004 - **Identifier:** ISO 21538:2004 _(verified: appears in the quote below)_ - **Item title:** Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building construction and civil engineering _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21538:2016 - **Withdrawn / published date:** 2004-10-12 _(verified: appears in the quote below)_ > 40485,IS,,ISO 21538:2004,Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building construction and civil engineering,Âmes pour meules de tronçonnage superabrasives — Alésages de montage et de fixation — Bâtiment et génie civil,2004-10-12,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[69896],"['en','fr']",5,
ISO 21538:2004 specifies dimensions for mounting and fixing bores in blanks. These mounting and fixing bores comply with the relevant dimensions of the clamping flanges specified in ISO 21537-2:2004.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21538:2016 - **Identifier:** ISO 21538:2016 _(verified: appears in the quote below)_ - **Item title:** Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building construction and civil engineering _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21538:2024 - **Withdrawn / published date:** 2016-01-26 _(verified: appears in the quote below)_ > 69896,IS,,ISO 21538:2016,Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building construction and civil engineering,Âmes pour meules de tronçonnage superabrasives — Alésages de montage et de fixation — Bâtiment et génie civil,2016-01-26,2,['25.100.70'],ISO/TC 29/SC 5,9599,[40485],[84941],"['en','fr']",5,ISO 21538:2016 specifies dimensions for mounting and fixing bores in blanks. These mounting and fixing bores comply with the relevant dimensions of the clamping flanges specified in ISO 21537‑2.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21542:2011 - **Identifier:** ISO 21542:2011 _(verified: appears in the quote below)_ - **Item title:** Building construction — Accessibility and usability of the built environment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21542:2021 - **Withdrawn / published date:** 2011-12-12 _(verified: appears in the quote below)_ > 50498,IS,,ISO 21542:2011,Building construction — Accessibility and usability of the built environment,Construction immobilière — Accessibilité et facilité d'utilisation de l'environnement bâti,2011-12-12,1,['91.060.01'],ISO/TC 59/SC 16,9599,[22799],[71860],"['en','fr']",152,"ISO 21542:2011 specifies a range of requirements and recommendations for many of the elements of construction, assemblies, components and fittings which comprise the built environment. These requirements relate to the constructional aspects of access to buildings, to circulation within buildings, to egress from buildings in the normal course of events and evacuation in the event of an emergency. It also deals with asp Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21543:2006 - **Identifier:** ISO 21543:2006 _(verified: appears in the quote below)_ - **Item title:** Milk products — Guidelines for the application of near infrared spectrometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21543:2020 - **Withdrawn / published date:** 2006-09-06 _(verified: appears in the quote below)_ > 40318,IS,,ISO 21543:2006,Milk products — Guidelines for the application of near infrared spectrometry,Produits laitiers — Lignes directrices pour l'application de la spectrométrie dans le proche infrarouge,2006-09-06,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[77606],"['en','fr']",24,"
ISO 21543|IDF 201:2006 provides guidance on use of near infrared spectrometry in the determination of
-- the total solids, fat and protein contents in cheese,
-- the moisture, fat, protein and lactose contents in dried milk, dried whey and dried butter milk, and
-- the moisture, fat, non-fat solids and salt contents in butter.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-1:2004 - **Identifier:** ISO 21549-1:2004 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 1: General structure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21549-1:2013 - **Withdrawn / published date:** 2004-05-12 _(verified: appears in the quote below)_ > 34598,IS,,ISO 21549-1:2004,Health informatics — Patient healthcard data — Part 1: General structure,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 1: Structure générale,2004-05-12,1,['35.240.80'],ISO/TC 215,9599,,[60396],['en'],3,ISO 21549-1:2004 is Part 1 of a multi-part standard that defines data structures held on patient healthcards compliant with the physical dimensions of ID-1 cards as defined by ISO/IEC 7810. This part of ISO 21549 does not apply to multiapplication cards. It defines a general structure for the different types of data defined in the other parts of the standard using UML notation.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-2:2004 - **Identifier:** ISO 21549-2:2004 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 2: Common objects _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21549-2:2014 - **Withdrawn / published date:** 2004-05-12 _(verified: appears in the quote below)_ > 34599,IS,,ISO 21549-2:2004,Health informatics — Patient healthcard data — Part 2: Common objects,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 2: Objets communs,2004-05-12,1,['35.240.80'],ISO/TC 215,9599,,[60488],['en'],16,"ISO 21549-2:2004 establishes a common framework for the content and the structure of common objects used to construct or referenced by other data-object data held on patient healthcare data cards.
It is applicable to situations in which such data are recorded on or transported by patient healthcards whose physical dimensions are compliant with those of ID-1 cards as defined by ISO/IEC 7810.
It specifies the basic struct Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-3:2004 - **Identifier:** ISO 21549-3:2004 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 3: Limited clinical data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21549-3:2014 - **Withdrawn / published date:** 2004-05-12 _(verified: appears in the quote below)_ > 34600,IS,,ISO 21549-3:2004,Health informatics — Patient healthcard data — Part 3: Limited clinical data,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 3: Données cliniques limitées,2004-05-12,1,['35.240.80'],ISO/TC 215,9599,,[60489],['en'],10,"
ISO 21549-3:2004 describes and defines the limited clinical data objects used in or referenced by patient-held health data cards using UML, plain text and abstract syntax notation (ASN.1).
It is applicable to situations in which such data are recorded on or transported by patient healthcards whose physical dimensions are compliant with those of ID-1 cards as defined by ISO/IEC 7810.
It specifies the b Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-4:2006 - **Identifier:** ISO 21549-4:2006 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 4: Extended clinical data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21549-4:2014 - **Withdrawn / published date:** 2006-10-31 _(verified: appears in the quote below)_ > 37431,IS,,ISO 21549-4:2006,Health informatics — Patient healthcard data — Part 4: Extended clinical data,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 4: Données cliniques étendues,2006-10-31,1,['35.240.80'],ISO/TC 215,9599,,[60490],"['en','fr']",19,"
ISO 21549-4:2006 is applicable to situations in which such data are recorded on or transported by patient healthcare data cards compliant with the physical dimensions of ID-1 cards defined by ISO 7810.
ISO 21549-4:2006 specifies the basic structure of the data contained within the data object extended clinical data, but does not specify or mandate particular data-sets for storage on devices.
" 37 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-5:2008 - **Identifier:** ISO 21549-5:2008 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 5: Identification data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21549-5:2015 - **Withdrawn / published date:** 2008-03-31 _(verified: appears in the quote below)_ > 39282,IS,,ISO 21549-5:2008,Health informatics — Patient healthcard data — Part 5: Identification data,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 5: Données d'identification,2008-03-31,1,['35.240.80'],ISO/TC 215,9599,,[63030],"['en','fr']",6,"ISO 21549-5:2008 establishes a common framework for the content and the structure of identification data held on healthcare data cards. It specifies the basic structure of the data, but does not specify particular data-sets for storage on devices.
The detailed functions and mechanisms of the following services are not within the scope of ISO 21549-5:2008 (although its structures can accommodate suitable Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-5:2015 - **Identifier:** ISO 21549-5:2015 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 5: Identification data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21549-5:2023 - **Withdrawn / published date:** 2015-09-16 _(verified: appears in the quote below)_ > 63030,IS,,ISO 21549-5:2015,Health informatics — Patient healthcard data — Part 5: Identification data,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 5: Données d'identification,2015-09-16,2,['35.240.80'],ISO/TC 215,9599,[39282],[83446],"['en','fr']",8,"
ISO 21549-5:2015 describes and defines the basic structure of the identification data objects held on healthcare data cards, but does not specify particular data sets for storage on devices.
The detailed functions and mechanisms of the following services are not within the scope of this part of ISO 21549 (although its structures can accommodate suitable data objects elsewhere specified):
- Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-6:2008 - **Identifier:** ISO 21549-6:2008 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 6: Administrative data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 21549-6 - **Withdrawn / published date:** 2008-03-31 _(verified: appears in the quote below)_ > 42833,IS,,ISO 21549-6:2008,Health informatics — Patient healthcard data — Part 6: Administrative data,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 6: Données administratives,2008-03-31,1,['35.240.80'],ISO/TC 215,9599,,[88553],"['en','fr']",6,"
ISO 21549-6:2008 is applicable to situations in which administrative data are recorded on or transported by patient healthcards compliant with the physical dimensions of ID-1 cards defined by ISO/IEC 7810.
ISO 21549-6:2008 specifies the basic structure of the data contained within the data object administrative data, but does not specify or mandate particular data sets for storage on devices.
The det Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-7:2007 - **Identifier:** ISO 21549-7:2007 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 7: Medication data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21549-7:2016 - **Withdrawn / published date:** 2007-06-11 _(verified: appears in the quote below)_ > 34601,IS,,ISO 21549-7:2007,Health informatics — Patient healthcard data — Part 7: Medication data,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 7: Données de médication,2007-06-11,1,['35.240.80'],ISO/TC 215,9599,,[63739],"['en','fr']",37,"
ISO 21549-7:2007 describes and defines the medication data objects used within or referenced by patient held health data cards using UML, plain text and Abstract Syntax Notation (ASN.1).
ISO 21549-7:2007 is applicable to situations in which such data are recorded on or transported by patient healthcards compliant with the physical dimensions of ID-1 cards defined by ISO 7810.
ISO 21549-7:2007 specifies th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21549-7:2016 - **Identifier:** ISO 21549-7:2016 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Patient healthcard data — Part 7: Medication data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21549-7:2024 - **Withdrawn / published date:** 2016-11-23 _(verified: appears in the quote below)_ > 63739,IS,,ISO 21549-7:2016,Health informatics — Patient healthcard data — Part 7: Medication data,Informatique de santé — Données relatives aux cartes de santé des patients — Partie 7: Données de médication,2016-11-23,2,['35.240.80'],ISO/TC 215,9599,[34601],[86408],"['en','fr']",50,"
ISO 21549-7:2016 applies to situations in which such data is recorded on or transported by patient healthcards compliant with the physical dimensions of ID-1 cards defined by ISO/IEC 7810.
ISO 21549-7:2016 specifies the basic structure of the data contained within the medication data object, but does not specify or mandate particular data sets for storage on devices.
The purpose of this document is Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21561-2:2016 - **Identifier:** ISO 21561-2:2016 _(verified: appears in the quote below)_ - **Item title:** Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR — Part 2: FTIR with ATR method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21561-2:2024 - **Withdrawn / published date:** 2016-03-08 _(verified: appears in the quote below)_ > 64125,IS,,ISO 21561-2:2016,Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR — Part 2: FTIR with ATR method,Caoutchouc styrène-butadiène (SBR) — Détermination de la microstructure du SBR polymérisé en solution — Partie 2: Méthode FTIR avec ATR,2016-03-08,1,['83.060'],ISO/TC 45/SC 3,9599,"[53038,40322]",[85552],['en'],16,"
ISO 21561-2:2016 specifies procedures for the quantitative determination of the microstructure of the butadiene and the content of styrene in solution-polymerized SBR (S-SBR) by Fourier Transform Infrared Spectrometry (FTIR) with Attenuated Total Reflection (ATR) method. The styrene content is expressed in mass % relative to Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21561:2005 - **Identifier:** ISO 21561:2005 _(verified: appears in the quote below)_ - **Item title:** Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21561-2:2016 | ISO 21561-1:2015 - **Withdrawn / published date:** 2005-11-18 _(verified: appears in the quote below)_ > 40322,IS,,ISO 21561:2005,Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR,Caoutchouc styrène-butadiène (SBR) — Détermination de la microstructure du SBR polymérisé en solution,2005-11-18,1,['83.060'],ISO/TC 45/SC 3,9599,,"[64125,66501]",['en'],15,"
ISO 21561:2005 specifies procedures for the quantitative determination of the microstructure of the butadiene units and the content of styrene units in solution-polymerized SBR (S-SBR) by 1H-NMR spectrometry as an absolute method and by IR spectrometry as a relative method. The styrene content is expressed in mass % relative to the whole polymer. The 1,4-trans, 1,4-cis and 1,2-vinyl cont Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21561:2005/Amd 1:2010 - **Identifier:** ISO 21561:2005/Amd 1:2010 _(verified: appears in the quote below)_ - **Item title:** Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21561-2:2016 | ISO 21561-1:2015 - **Withdrawn / published date:** 2010-11-23 _(verified: appears in the quote below)_ > 53038,IS,Amd,ISO 21561:2005/Amd 1:2010,Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR — Amendment 1,Caoutchouc styrène-butadiène (SBR) — Détermination de la microstructure du SBR polymérisé en solution — Amendement 1,2010-11-23,1,['83.060'],ISO/TC 45/SC 3,9599,,"[64125,66501]",['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21563:2013 - **Identifier:** ISO 21563:2013 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Hydrocolloid impression materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21563:2021 - **Withdrawn / published date:** 2013-08-05 _(verified: appears in the quote below)_ > 55314,IS,,ISO 21563:2013,Dentistry — Hydrocolloid impression materials,Médecine bucco-dentaire — Produits pour empreintes à base d'hydrocolloïdes,2013-08-05,1,['11.060.10'],ISO/TC 106/SC 2,9599,"[22897,22724,6157]",[77792],"['en','fr']",45,"
ISO 21563:2013 specifies the requirements and tests for helping determine whether the elastic aqueous agar and alginate hydrocolloid dental impression materials, as prepared for retail marketing, are of the quality needed for their intended purposes. It also specifies requirements for labelling and instructions for use.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2157:1972 - **Identifier:** ISO 2157:1972 _(verified: appears in the quote below)_ - **Item title:** Dental burs and cutters — Nominal sizes and designation of working parts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2157:1984 | ISO 2157:1992 - **Withdrawn / published date:** 1972-08-01 _(verified: appears in the quote below)_ > 6947,IS,,ISO 2157:1972,Dental burs and cutters — Nominal sizes and designation of working parts,"Fraises et instruments de coupe, utilisés en art dentaire — Dimensions nominales et désignation des parties actives",1972-08-01,1,['11.060.20'],ISO/TC 106/SC 4,9599,,"[6948,6949]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2157:1984 - **Identifier:** ISO 2157:1984 _(verified: appears in the quote below)_ - **Item title:** Dental rotary instruments — Nominal sizes and designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2157:1992 - **Withdrawn / published date:** 1984-08-01 _(verified: appears in the quote below)_ > 6948,IS,,ISO 2157:1984,Dental rotary instruments — Nominal sizes and designation,Instruments rotatifs dentaires — Dimensions nominales et désignation,1984-08-01,2,['11.060.20'],ISO/TC 106/SC 4,9599,[6947],[6949],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2157:1992 - **Identifier:** ISO 2157:1992 _(verified: appears in the quote below)_ - **Item title:** Dental rotary instruments — Nominal diameters and designation code number _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2157:2016 - **Withdrawn / published date:** 1992-06-11 _(verified: appears in the quote below)_ > 6949,IS,,ISO 2157:1992,Dental rotary instruments — Nominal diameters and designation code number,Instruments rotatifs dentaires — Diamètres nominaux et désignation par numéro de code,1992-06-11,3,['11.060.20'],ISO/TC 106/SC 4,9599,"[6948,6947]",[66428],"['en','fr']",3,"Specifies the relevant characteristics of the working parts of dental rotary instruments, e.g. burs, laboratory burs, grinding instruments, diamond instruments, mandrels, etc. It does not cover the diameters of root canal instruments.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21572:2004 - **Identifier:** ISO 21572:2004 _(verified: appears in the quote below)_ - **Item title:** Foodstuffs — Methods for the detection of genetically modified organisms and derived products — Protein based methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21572:2013 - **Withdrawn / published date:** 2004-03-15 _(verified: appears in the quote below)_ > 34645,IS,,ISO 21572:2004,Foodstuffs — Methods for the detection of genetically modified organisms and derived products — Protein based methods,Produits alimentaires — Méthodes pour la détection d'organismes génétiquement modifiés et de produits dérivés — Méthodes basées sur les protéines,2004-03-15,1,['67.050'],ISO/TC 34/SC 16,9599,,[51005],"['en','fr']",21,ISO 21572:2004 provides general guidelines and performance criteria for methods for the detection and/or quantitation of specific proteins derived from genetically modified (GM) plant material in a specified matrix.
These general guidelines address existing antibody based methods. Methods other than those described in annex A may Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21572:2004/Cor 1:2005 - **Identifier:** ISO 21572:2004/Cor 1:2005 _(verified: appears in the quote below)_ - **Item title:** Foodstuffs — Methods for the detection of genetically modified organisms and derived products — Protein based methods — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21572:2013 - **Withdrawn / published date:** 2005-02-18 _(verified: appears in the quote below)_ > 41983,IS,Cor,ISO 21572:2004/Cor 1:2005,Foodstuffs — Methods for the detection of genetically modified organisms and derived products — Protein based methods — Technical Corrigendum 1,Produits alimentaires — Méthodes pour la détection d'organismes génétiquement modifiés et de produits dérivés — Méthodes basées sur les protéines — Rectificatif technique 1,2005-02-18,1,['67.050'],ISO/TC 34,9599,,[51005],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21572:2013 - **Identifier:** ISO 21572:2013 _(verified: appears in the quote below)_ - **Item title:** Foodstuffs — Molecular biomarker analysis — Protein-based methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 21572 | ISO 21572:2019 - **Withdrawn / published date:** 2013-02-05 _(verified: appears in the quote below)_ > 51005,IS,,ISO 21572:2013,Foodstuffs — Molecular biomarker analysis — Protein-based methods,Produits alimentaires — Analyse des biomarqueurs moléculaires — Méthodes basées sur les protéines,2013-02-05,2,['67.050'],ISO/TC 34/SC 16,9599,"[41983,34645]","[76529,77325]","['en','fr','ru']",29,
ISO 21572:2013 provides general guidelines and performance criteria for methods for the detection and/or quantification of specific proteins or protein(s) of interest [POI(s)] in a specified matrix.
These general guidelines address existing antibody based methods. Methods other than those described in Annex A or Annex B can also detect the POI. The same criteria as outlined in ISO 21572:2013 apply ge Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21573-1:2006 - **Identifier:** ISO 21573-1:2006 _(verified: appears in the quote below)_ - **Item title:** Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21573-1:2014 - **Withdrawn / published date:** 2006-05-12 _(verified: appears in the quote below)_ > 35947,IS,,ISO 21573-1:2006,Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications,Machines et matériels pour la construction des bâtiments — Pompes à béton — Partie 1: Terminologie et spécifications commerciales,2006-05-12,1,['91.220'],ISO/TC 195/SC 1,9599,,[66215],"['en','fr']",21,
ISO 21573-1:2006 establishes terminology and commercial-literature specifications for concrete pumps which are used on building sites for concrete-mix delivery.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21573-1:2014 - **Identifier:** ISO 21573-1:2014 _(verified: appears in the quote below)_ - **Item title:** Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21573-1:2024 - **Withdrawn / published date:** 2014-08-04 _(verified: appears in the quote below)_ > 66215,IS,,ISO 21573-1:2014,Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications,Machines et matériels pour la construction des bâtiments — Pompes à béton — Partie 1: Terminologie et spécifications commerciales,2014-08-04,2,['91.220'],ISO/TC 195/SC 1,9599,[35947],[86231],['en'],21,ISO 21573-1:2014 establishes terminology and commercial-literature specifications for concrete pumps which are used on building sites for concrete-mix delivery.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21573-2:2008 - **Identifier:** ISO 21573-2:2008 _(verified: appears in the quote below)_ - **Item title:** Building construction machinery and equipment — Concrete pumps — Part 2: Procedure for examination of technical parameters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21573-2:2020 - **Withdrawn / published date:** 2008-06-23 _(verified: appears in the quote below)_ > 37176,IS,,ISO 21573-2:2008,Building construction machinery and equipment — Concrete pumps — Part 2: Procedure for examination of technical parameters,Machines et matériels pour la construction des bâtiments — Pompes à béton — Partie 2: Procédure pour la détermination des paramètres techniques,2008-06-23,1,['91.220'],ISO/TC 195/SC 1,9599,,[75344],"['en','fr']",17,ISO 21573-2:2008 specifies the procedure and requirements for examining the technical commercial specifications of concrete pumps as defined in ISO 21573-1. It applies to mobile (with or without boom) and stationary concrete pumps.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21575:2018 - **Identifier:** ISO 21575:2018 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Optical materials and components — The powder test method for the water resistance of optical glass _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21575:2026 - **Withdrawn / published date:** 2018-06-28 _(verified: appears in the quote below)_ > 71112,IS,,ISO 21575:2018,Optics and photonics — Optical materials and components — The powder test method for the water resistance of optical glass,Optique et photonique — Matériaux et composants optiques — Méthode d'essai sur poudre pour déterminer la résistance à l'eau des verres optiques,2018-06-28,1,['37.020'],ISO/TC 172/SC 3,9599,,[88734],['en'],4,This document specifies the general procedures of the powder test method for the water resistance of optical glass.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 216:1975 - **Identifier:** ISO 216:1975 _(verified: appears in the quote below)_ - **Item title:** Writing paper and certain classes of printed matter — Trimmed sizes — A and B series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 216 | ISO 216:2007 - **Withdrawn / published date:** 1975-05-01 _(verified: appears in the quote below)_ > 4087,IS,,ISO 216:1975,Writing paper and certain classes of printed matter — Trimmed sizes — A and B series,Papiers d'écriture et certaines catégories d'imprimés — Formats finis — Séries A et B,1975-05-01,1,['85.080.10'],ISO/TC 6,9599,,"[4088,36631]","['en','fr']",3,"Appllies to trimmed sizes of paper for administrative, commercial and technical use and to printed matter such as forms and catalogues, and does not necessarily apply to newspapers, books, posters etc.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2160:1972 - **Identifier:** ISO 2160:1972 _(verified: appears in the quote below)_ - **Item title:** Petroleum products — Corrosiveness to copper — Copper strip test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2160:1985 - **Withdrawn / published date:** 1972-11-01 _(verified: appears in the quote below)_ > 6950,IS,,ISO 2160:1972,Petroleum products — Corrosiveness to copper — Copper strip test,Produits pétroliers — Action corrosive sur le cuivre — Essai à la lame de cuivre,1972-11-01,1,['75.080'],ISO/TC 28,9599,,[6951],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2160:1985 - **Identifier:** ISO 2160:1985 _(verified: appears in the quote below)_ - **Item title:** Petroleum products — Corrosiveness to copper — Copper strip test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2160:1998 - **Withdrawn / published date:** 1985-02-14 _(verified: appears in the quote below)_ > 6951,IS,,ISO 2160:1985,Petroleum products — Corrosiveness to copper — Copper strip test,Produits pétroliers — Action corrosive sur le cuivre — Essai à la lame de cuivre,1985-02-14,2,['75.080'],ISO/TC 28,9599,[6950],[27552],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2160:1985/Cor 1:1993 - **Identifier:** ISO 2160:1985/Cor 1:1993 _(verified: appears in the quote below)_ - **Item title:** Petroleum products — Corrosiveness to copper — Copper strip test — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2160:1998 - **Withdrawn / published date:** 1993-11-11 _(verified: appears in the quote below)_ > 22732,IS,Cor,ISO 2160:1985/Cor 1:1993,Petroleum products — Corrosiveness to copper — Copper strip test — Technical Corrigendum 1,Produits pétroliers — Action corrosive sur le cuivre — Essai à la lame de cuivre — Rectificatif technique 1,1993-11-11,2,['75.080'],ISO/TC 28,9599,,[27552],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21606:2007 - **Identifier:** ISO 21606:2007 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Elastomeric auxiliaries for use in orthodontics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21606:2022 - **Withdrawn / published date:** 2007-05-18 _(verified: appears in the quote below)_ > 40342,IS,,ISO 21606:2007,Dentistry — Elastomeric auxiliaries for use in orthodontics,Art dentaire — Auxiliaires élastomères utilisés en orthodontie,2007-05-18,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[82586],"['en','fr']",8,"ISO 21606:2007 is applicable to all elastomeric auxiliaries including orthodontic elastics, elastomeric bands, chains, links, thread and ligatures used for orthodontics both inside and outside the mouth, in conjunction with fixed and removable appliances.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21618:2019 - **Identifier:** ISO 21618:2019 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21618:2025 - **Withdrawn / published date:** 2019-03-01 _(verified: appears in the quote below)_ > 71248,IS,,ISO 21618:2019,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method","Céramiques techniques (céramiques avancées, céramiques techniques avancées) — Méthode d’essai pour déterminer la résistance à la rupture par indentation (IF) des céramiques monolithiques à température ambiante",2019-03-01,1,['81.060.30'],ISO/TC 206,9599,,[90548],['en'],17,"This document describes a test method that covers the determination of fracture resistance of monolithic ceramics at room temperature by the indentation fracture (IF) method.
This document is intended for use Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2162:1973 - **Identifier:** ISO 2162:1973 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Representation of springs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2162-1:1993 - **Withdrawn / published date:** 1973-03-01 _(verified: appears in the quote below)_ > 6952,IS,,ISO 2162:1973,Technical drawings — Representation of springs,Dessins techniques — Représentation des ressorts,1973-03-01,1,"['21.160','01.100.20']",ISO/TC 10,9599,,[6953],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2162-3:1993 - **Identifier:** ISO 2162-3:1993 _(verified: appears in the quote below)_ - **Item title:** Technical product documentation — Springs — Part 3: Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 26909:2009 - **Withdrawn / published date:** 1993-11-25 _(verified: appears in the quote below)_ > 6955,IS,,ISO 2162-3:1993,Technical product documentation — Springs — Part 3: Vocabulary,Documentation technique de produits — Ressorts — Partie 3: Vocabulaire,1993-11-25,1,"['21.160','01.100.20','01.040.01','01.040.21']",ISO/TC 227,9599,,[43902],"['en','fr']",7,
Defines 33 terms in English and French for the description of springs and their characteristics to be used in technical product documentation.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21627-1:2002 - **Identifier:** ISO 21627-1:2002 _(verified: appears in the quote below)_ - **Item title:** Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21627-1:2009 - **Withdrawn / published date:** 2002-09-05 _(verified: appears in the quote below)_ > 34631,IS,,ISO 21627-1:2002,Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine,Plastiques — Résines époxydes — Détermination de la teneur en chlore — Partie 1: Chlore inorganique,2002-09-05,1,['83.080.10'],ISO/TC 61/SC 12,9599,[19320],[50598],"['en','fr']",5,"ISO 21627 specifies a direct potentiometric method for the determination of inorganic chlorine in epoxy resins, also called ionic chlorine.
The inorganic chlorine content is expressed in milligrams per kilogram of epoxy resin.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21627-2:2002 - **Identifier:** ISO 21627-2:2002 _(verified: appears in the quote below)_ - **Item title:** Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21627-2:2009 - **Withdrawn / published date:** 2002-09-05 _(verified: appears in the quote below)_ > 34632,IS,,ISO 21627-2:2002,Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine,Plastiques — Résines époxydes — Détermination de la teneur en chlore — Partie 2: Chlore facilement saponifiable,2002-09-05,1,['83.080.10'],ISO/TC 61/SC 12,9599,[25208],[50599],"['en','fr']",6,ISO 21627-2 specifies a method for the determination of easily saponifiable chlorine in epoxy resins.
The values obtained are indicative of the concentration of easily saponifiable chlorine of chlorohydrin groups in the compounds.
The easily saponifiable chlorine content is the quantity of easily saponifiable chlorine in a given quantity of epoxy resin.
34633, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21627-3:2002 - **Identifier:** ISO 21627-3:2002 _(verified: appears in the quote below)_ - **Item title:** Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21627-3:2009 - **Withdrawn / published date:** 2002-09-05 _(verified: appears in the quote below)_ > 34633,IS,,ISO 21627-3:2002,Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine,Plastiques — Résines époxydes — Détermination de la teneur en chlore — Partie 3: Chlore total,2002-09-05,1,['83.080.10'],ISO/TC 61/SC 12,9599,[22472],[50600],"['en','fr']",5,"ISO 21627-3 specifies a method for the determination of the total chlorine contained in epoxy resins.
The amount of chlorine measured by this method, referred to as total chlorine, includes saponifiable organic chlorine and inorganic chlorine.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21628:2008 - **Identifier:** ISO 21628:2008 _(verified: appears in the quote below)_ - **Item title:** Gardening machinery — Powered material-collecting systems — Safety _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21628:2020 - **Withdrawn / published date:** 2008-07-10 _(verified: appears in the quote below)_ > 40352,IS,,ISO 21628:2008,Gardening machinery — Powered material-collecting systems — Safety,Matériel de jardinage — Systèmes motorisés de collecte des matériaux — Sécurité,2008-07-10,1,['65.060.70'],ISO/TC 23/SC 13,9599,,[74504],"['en','fr']",5,"ISO 21628:2008 gives safety requirements and the means for their verification specific to the design and construction of powered material‑collecting systems used in agriculture, gardening and areal maintenance (e.g. landscaping). It is applicable to mounted, semi-mounted or trailed machines manufactured after the date of its publication.
It specifies means for eliminating or reducing mechanical hazards when the material-collecting system is Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21628:2008/Amd 1:2015 - **Identifier:** ISO 21628:2008/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Gardening machinery — Powered material-collecting systems — Safety — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21628:2020 - **Withdrawn / published date:** 2015-12-03 _(verified: appears in the quote below)_ > 66990,IS,Amd,ISO 21628:2008/Amd 1:2015,Gardening machinery — Powered material-collecting systems — Safety — Amendment 1,Matériel de jardinage — Systèmes motorisés de collecte des matériaux — Sécurité — Amendement 1,2015-12-03,1,['65.060.70'],ISO/TC 23/SC 13,9599,,[74504],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2163:1975 - **Identifier:** ISO 2163:1975 _(verified: appears in the quote below)_ - **Item title:** Industrial trucks — Wheels and castors — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 22877:2004 - **Withdrawn / published date:** 1975-07-01 _(verified: appears in the quote below)_ > 6956,IS,,ISO 2163:1975,Industrial trucks — Wheels and castors — Vocabulary,Chariots de manutention — Roues et roulettes — Vocabulaire,1975-07-01,1,"['01.040.53','53.060']",ISO/TC 110/SC 1,9599,,[36536],"['en','fr']",9,"
Defines terms relating to industrial wheels and castors (industrial wheels, axle and mountings, industrial castors).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21647:2004 - **Identifier:** ISO 21647:2004 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Particular requirements for the basic safety and essential performance of respiratory gas monitors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 21647 | ISO 80601-2-55:2011 - **Withdrawn / published date:** 2004-11-17 _(verified: appears in the quote below)_ > 34637,IS,,ISO 21647:2004,Medical electrical equipment — Particular requirements for the basic safety and essential performance of respiratory gas monitors,Appareils électromédicaux — Prescriptions particulières relatives à la sécurité et aux performances de base des moniteurs de gaz respiratoires,2004-11-17,1,['11.040.10'],ISO/TC 121/SC 1,9599,"[17801,22622,19195,28347]","[52127,52211]","['en','fr','ru']",40,"ISO 21647:2004 specifies particular requirements for the basic safety and essential performance of respiratory gas monitors (RGM) (as defined in 3.15) intended for continuous operation for use with humans. It supplements the requirements of IEC 60601-1:1988.
ISO 21647:2004 spec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21647:2004/Cor 1:2005 - **Identifier:** ISO 21647:2004/Cor 1:2005 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Particular requirements for the basic safety and essential performance of respiratory gas monitors — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 21647 | ISO 80601-2-55:2011 - **Withdrawn / published date:** 2005-07-13 _(verified: appears in the quote below)_ > 42637,IS,Cor,ISO 21647:2004/Cor 1:2005,Medical electrical equipment — Particular requirements for the basic safety and essential performance of respiratory gas monitors — Technical Corrigendum 1,Appareils électromédicaux — Prescriptions particulières relatives à la sécurité et aux performances de base des moniteurs de gaz respiratoires — Rectificatif technique 1,2005-07-13,1,['11.040.10'],ISO/TC 121/SC 1,9599,,"[52127,52211]","['en','ru']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21649:2006 - **Identifier:** ISO 21649:2006 _(verified: appears in the quote below)_ - **Item title:** Needle-free injectors for medical use — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21649:2023 - **Withdrawn / published date:** 2006-05-19 _(verified: appears in the quote below)_ > 35954,IS,,ISO 21649:2006,Needle-free injectors for medical use — Requirements and test methods,Injecteurs sans aiguille à usage médical — Exigences et méthodes d'essai,2006-05-19,1,['11.040.20'],ISO/TC 84,9599,,[82503],"['en','fr','ru']",32,"
ISO 21649:2006 applies to safety and performance and testing requirements for single-use and multiple-use needle-free injection systems intended for human use in clinics and other medical settings and for personal use by patients.
The dose chamber of the injection system is often disposable and intended to be replaced after either a single use or a limited number of uses. It is sometimes separable from the injection mechanism and often termed a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2167:1981 - **Identifier:** ISO 2167:1981 _(verified: appears in the quote below)_ - **Item title:** Round-headed cabbage — Guide to storage _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2167:1991 - **Withdrawn / published date:** 1981-10-01 _(verified: appears in the quote below)_ > 6961,IS,,ISO 2167:1981,Round-headed cabbage — Guide to storage,Choux pommés — Guide pour l'entreposage,1981-10-01,2,['67.080.20'],ISO/TC 34,9599,,[6962],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21670:2003 - **Identifier:** ISO 21670:2003 _(verified: appears in the quote below)_ - **Item title:** Hexagon weld nuts with flange _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21670:2014 - **Withdrawn / published date:** 2003-10-16 _(verified: appears in the quote below)_ > 35963,IS,,ISO 21670:2003,Hexagon weld nuts with flange,"Écrous hexagonaux à souder, à embase",2003-10-16,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[63369],"['en','fr']",4,"
ISO 21670:2003 specifies characteristics for hexagon weld nuts with flange, with sizes M5 to M16 (coarse thread) and M12 to M16 (fine thread), of product grade A.
Weld nuts conforming to this International Standard are suitable for use with bolts of property classes up to 10.9 in accordance with ISO 898-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 76](https://referencesource.org/iso-standard-supersessions/p/76/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 78](https://referencesource.org/iso-standard-supersessions/p/78/) Last verified: 2026-08-05. Review by: 2027-02-02.