This document specifies dimensions required for the installation and integration of the high pressure fuel pump in gasoline (GDI) engines. The location of the fuel connections and the dimensions of the pump outside shape are not defined since they vary according to the manufacturer of the pump and to the particular application.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21043-1:2018 - **Identifier:** ISO 21043-1:2018 _(verified: appears in the quote below)_ - **Item title:** Forensic sciences — Part 1: Terms and definitions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21043-1:2025 - **Withdrawn / published date:** 2018-08-09 _(verified: appears in the quote below)_ > 69732,IS,,ISO 21043-1:2018,Forensic sciences — Part 1: Terms and definitions,Criminalistique — Partie 1: Termes et définitions,2018-08-09,1,['07.140'],ISO/TC 272,9599,,[87128],"['en','fr']",5,This document defines terms used in the ISO 21043 series of standards.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21047:2009 - **Identifier:** ISO 21047:2009 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — International Standard Text Code (ISTC) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 21047 - **Withdrawn / published date:** 2009-03-09 _(verified: appears in the quote below)_ > 41603,IS,,ISO 21047:2009,Information and documentation — International Standard Text Code (ISTC),Information et documentation — Code international normalisé des textes (ISTC),2009-03-09,1,['01.140.20'],ISO/TC 46/SC 9,9599,,[73300],"['en','fr']",22,"ISO 21047 specifies the International Standard Text Code (ISTC) which is applicable to any textual work, whenever there is an intention to produce such a textual work in the form of one or more manifestations. It provides an identification data element for applications that record and exchange information about textual works and related manifestations. For example, the ISTC can be used for the purposes of collocating subsequent manifestations Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21048:2004 - **Identifier:** ISO 21048:2004 _(verified: appears in the quote below)_ - **Item title:** Plastics — Epoxy resins — Determination of 1,2-glycol content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21048:2014 - **Withdrawn / published date:** 2004-06-10 _(verified: appears in the quote below)_ > 34396,IS,,ISO 21048:2004,"Plastics — Epoxy resins — Determination of 1,2-glycol content","Plastiques — Résines époxydes — Détermination de la teneur en 1,2-glycol",2004-06-10,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[63357],"['en','fr']",5,"
ISO 21048:2004 specifies a method for the determination of the 1,2-glycol content in epoxy resins.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2106:1982 - **Identifier:** ISO 2106:1982 _(verified: appears in the quote below)_ - **Item title:** Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2106:2011 - **Withdrawn / published date:** 1982-11-01 _(verified: appears in the quote below)_ > 6894,IS,,ISO 2106:1982,Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method,Anodisation de l'aluminium et de ses alliages — Détermination de la masse par unité de surface (masse surfacique) des couches anodiques — Méthode gravimétrique,1982-11-01,2,['25.220.20'],ISO/TC 79/SC 2,9599,,[51483],"['en','fr']",2,"The method is applicable to all oxide coatings formed by anodizing aluminium and its alloys, either cast or wrought. This method is suitable for most aluminium alloys except those in which the copper content is greater than 6 %.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2106:1982/Amd 1:1983 - **Identifier:** ISO 2106:1982/Amd 1:1983 _(verified: appears in the quote below)_ - **Item title:** Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2106:2011 - **Withdrawn / published date:** 1983-09-01 _(verified: appears in the quote below)_ > 6895,IS,Amd,ISO 2106:1982/Amd 1:1983,Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method — Amendment 1,Anodisation de l'aluminium et de ses alliages — Détermination de la masse par unité de surface (masse surfacique) des couches anodiques — Méthode gravimétrique — Amendement 1,1983-09-01,2,['25.220.20'],ISO/TC 79/SC 2,9599,,[51483],"['en','fr']",1,"Page 1, clause 2, replace the 3rd paragraph by: 'Conversely, if the conditions of application of the layer and its density are known, the determination of the mass per unit area (surface density) can permit a calculation of the average mass and an approximat Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2106:2011 - **Identifier:** ISO 2106:2011 _(verified: appears in the quote below)_ - **Item title:** Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2106:2019 - **Withdrawn / published date:** 2011-02-23 _(verified: appears in the quote below)_ > 51483,IS,,ISO 2106:2011,Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method,Anodisation de l'aluminium et de ses alliages — Détermination de la masse par unité de surface (masse surfacique) des couches anodiques — Méthode gravimétrique,2011-02-23,3,['25.220.20'],ISO/TC 79/SC 2,9599,"[6894,6895]",[72811],"['en','fr']",5,"
ISO 2106:2011 specifies a gravimetric method for determining the mass per unit area (surface density) of anodic oxidation coatings on aluminium and its alloys.
The method is applicable to all oxidation coatings formed by anodizing aluminium and its alloys, either cast or wroug Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21067:2007 - **Identifier:** ISO 21067:2007 _(verified: appears in the quote below)_ - **Item title:** Packaging — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21067-2:2015 | ISO/DIS 21067 | ISO 21067-1:2016 - **Withdrawn / published date:** 2007-06-28 _(verified: appears in the quote below)_ > 34399,IS,,ISO 21067:2007,Packaging — Vocabulary,Emballages — Vocabulaire,2007-06-28,1,"['55.020','01.040.55']",ISO/TC 122,9599,,"[62932,52664,66981]",['en'],11,"
ISO 21067:2007 specifies preferred terms and definitions related to packaging and materials handling, for use in international commerce.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21068-1:2008 - **Identifier:** ISO 21068-1:2008 _(verified: appears in the quote below)_ - **Item title:** Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1: General information and sample preparation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21068-1:2024 - **Withdrawn / published date:** 2008-07-21 _(verified: appears in the quote below)_ > 35628,IS,,ISO 21068-1:2008,Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1: General information and sample preparation,Analyse chimique des matières premières et des produits réfractaires contenant du carbure de silicium — Partie 1: Informations générales et préparation des échantillons,2008-07-21,1,['81.080'],ISO/TC 33,9599,,[83504],"['en','fr']",8,ISO 21068-1:2008 gives definitions and specifies techniques for the preparation of samples for the chemical analysis of silicon-carbide-containing raw materials and refractory products.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21068-2:2008 - **Identifier:** ISO 21068-2:2008 _(verified: appears in the quote below)_ - **Item title:** Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21068-2:2024 - **Withdrawn / published date:** 2008-07-21 _(verified: appears in the quote below)_ > 43830,IS,,ISO 21068-2:2008,"Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon","Analyse chimique des matières premières et des produits réfractaires contenant du carbure de silicium — Partie 2: Détermination de la perte au feu, du carbone total, du carbone libre et du carbure de silicium, de la silice totale et libre, et du silicium total et libre",2008-07-21,1,['81.080'],ISO/TC 33,9599,,[83505],"['en','fr']",48,"ISO 21068-2:2008 specifies analytical techniques for the determination of change in mass by thermal tre Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21068-3:2008 - **Identifier:** ISO 21068-3:2008 _(verified: appears in the quote below)_ - **Item title:** Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21068-3:2024 - **Withdrawn / published date:** 2008-07-21 _(verified: appears in the quote below)_ > 43831,IS,,ISO 21068-3:2008,"Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents","Analyse chimique des matières premières et des produits réfractaires contenant du carbure de silicium — Partie 3: Dosage de l'azote, de l'oxygène et des constituants métalliques et oxydés",2008-07-21,1,['81.080'],ISO/TC 33,9599,,[83509],"['en','fr']",37,"
ISO 21068-3:2008 specifies methods for the determination of total nitrogen and nitrogen calculated as silicon nitride, total oxygen, and free metallic and oxidic components in silicon carbide raw materials and refractory products.
It appl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2107:1983 - **Identifier:** ISO 2107:1983 _(verified: appears in the quote below)_ - **Item title:** Aluminium, magnesium and their alloys — Temper designations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2107:2004 | ISO/WD 2107 - **Withdrawn / published date:** 1983-06-01 _(verified: appears in the quote below)_ > 6896,IS,,ISO 2107:1983,"Aluminium, magnesium and their alloys — Temper designations","Aluminium, magnésium et leurs alliages — Désignation des états",1983-06-01,1,"['25.200','77.120.10','77.120.20']",ISO/TC 79/SC 9,9599,,"[32984,1213]","['en','fr']",3,"
The temper designations define the sequence of basic treatments used to produce the tempers. Mechanical properties apply to individual alloy-temper-product combinataions. The temper designation consists of letters and follows the designation of the alloy, and is separated therefrom by a dash.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2107:2004 - **Identifier:** ISO 2107:2004 _(verified: appears in the quote below)_ - **Item title:** Aluminium and aluminium alloys — Wrought products — Temper designations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2107:2007 - **Withdrawn / published date:** 2004-07-08 _(verified: appears in the quote below)_ > 32984,IS,,ISO 2107:2004,Aluminium and aluminium alloys — Wrought products — Temper designations,Aluminium et alliages d'aluminium — Produits corroyés — Désignation des états métallurgiques,2004-07-08,2,"['25.200','77.120.10']",ISO/TC 79/SC 9,9599,[6896],[43401],"['en','fr']",9,ISO 2107:2004 establishes temper designations as required for identification for all product forms of wrought aluminium and aluminium alloys.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2107:2007 - **Identifier:** ISO 2107:2007 _(verified: appears in the quote below)_ - **Item title:** Aluminium and aluminium alloys — Wrought products — Temper designations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2107:2023 - **Withdrawn / published date:** 2007-01-15 _(verified: appears in the quote below)_ > 43401,IS,,ISO 2107:2007,Aluminium and aluminium alloys — Wrought products — Temper designations,Aluminium et alliages d'aluminium — Produits corroyés — Désignation des états métallurgiques,2007-01-15,3,"['25.200','77.120.10']",ISO/TC 79/SC 9,9599,[32984],[85023],"['en','fr']",9,ISO 2107:2007 establishes temper designations as required for identification for all product forms of wrought aluminium and aluminium alloys.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21070:2011 - **Identifier:** ISO 21070:2011 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Marine environment protection — Management and handling of shipboard garbage _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21070:2017 - **Withdrawn / published date:** 2011-08-19 _(verified: appears in the quote below)_ > 51003,IS,,ISO 21070:2011,Ships and marine technology — Marine environment protection — Management and handling of shipboard garbage,Navires et technologie marine — Protection de l'environnement marin — Gestion et manutention des déchets à bord du navire,2011-08-19,1,"['13.020.99','47.020.99']",ISO/TC 8/SC 2,9599,,[66930],"['en','ru']",18,"The requirements of MARPOL Annex V set the minimum standard for garbage management that apply to ships. Applicable national and regional regulations exceeding the requirements of MARPOL Annex V will also need to be observed. ISO 21070:2011 applies to the management and handling of garbage generated onboard ships during the period the garbage will be onbo Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21072-2:2009 - **Identifier:** ISO 21072-2:2009 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 2: Static water conditions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21072-2:2020 - **Withdrawn / published date:** 2009-08-07 _(verified: appears in the quote below)_ > 42307,IS,,ISO 21072-2:2009,Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 2: Static water conditions,Navires et technologie maritime — Protection de l'environnement marin: essais de performance des écumeurs du pétrole — Partie 2: Conditions en eau calme,2009-08-07,1,"['13.020.99','47.020.99']",ISO/TC 8/SC 2,9599,,[78957],['en'],11,"
ISO 21072-2:2009 specifies a methodology for establishing quantitative performance data for oil skimmers under static water conditions, so the end user can objectively judge, compare, and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and requires Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21072-3:2010 - **Identifier:** ISO 21072-3:2010 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 3: High viscosity oil _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21072-3:2020 - **Withdrawn / published date:** 2010-02-23 _(verified: appears in the quote below)_ > 44983,IS,,ISO 21072-3:2010,Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 3: High viscosity oil,Navires et technologie maritime — Protection de l'environnement marin: essais de performance des écumeurs du pétrole — Partie 3: Pétrole haute densité,2010-02-23,1,"['13.020.99','47.020.99']",ISO/TC 8/SC 2,9599,,[80555],['en'],10,"
ISO 21072-3:2010 specifies a methodology for establishing quantitative performance data for oil skimmers for recovery of oil with high viscosity, so the end user can objectively judge, compare and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and require Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21077:2016 - **Identifier:** ISO 21077:2016 _(verified: appears in the quote below)_ - **Item title:** Space data and information transfer systems — Digital motion imagery _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21077:2021 - **Withdrawn / published date:** 2016-07-06 _(verified: appears in the quote below)_ > 69837,IS,,ISO 21077:2016,Space data and information transfer systems — Digital motion imagery,Données spatiales et systèmes de transfert d'information - Imagerie du mouvement numérique,2016-07-06,1,['49.140'],ISO/TC 20/SC 13,9599,,[74553],['en'],33,"
The purpose of ISO 21077:2016 is to provide a common reference and framework of standards for digital motion video and imagery, and to provide recommendations for utilization of international standards for sharing or distributing motion video and imagery between spacecraft elements and ground systems.
The scope of ISO 21077:2016 includes traditional real-time streaming video and television, including human and robotic spacecraft-to-space Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2108:1978 - **Identifier:** ISO 2108:1978 _(verified: appears in the quote below)_ - **Item title:** Documentation — International standard book numbering (ISBN) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2108:1992 - **Withdrawn / published date:** 1978-11-01 _(verified: appears in the quote below)_ > 6897,IS,,ISO 2108:1978,Documentation — International standard book numbering (ISBN),Documentation — Système international pour la numérotation des livres (ISBN),1978-11-01,2,['01.140.20'],ISO/TC 46/SC 9,9599,,[6898],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2108:1992 - **Identifier:** ISO 2108:1992 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — International standard book numbering (ISBN) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2108:2005 - **Withdrawn / published date:** 1992-05-14 _(verified: appears in the quote below)_ > 6898,IS,,ISO 2108:1992,Information and documentation — International standard book numbering (ISBN),Information et documentation — Système international pour la numérotation des livres (ISBN),1992-05-14,3,['01.140.20'],ISO/TC 46/SC 9,9599,[6897],[36563],"['en','fr']",3,
The purpose is to coordinate and standardize the use of identifying numbers so that each international standard book number is unique to a title or edition of a book or other monographic publication (serial publications excluded) published or produced by a specific publisher or producer. The standard specifies the construction of an ISBN and the location of the printed number on the publication.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2108:2005 - **Identifier:** ISO 2108:2005 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — International standard book number (ISBN) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2108:2017 - **Withdrawn / published date:** 2005-05-30 _(verified: appears in the quote below)_ > 36563,IS,,ISO 2108:2005,Information and documentation — International standard book number (ISBN),Information et documentation — Numéro international normalisé du livre (ISBN),2005-05-30,4,['01.140.20'],ISO/TC 46/SC 9,9599,[6898],[65483],"['en','fr']",21,"The purpose of ISO 2108:2005 is to establish the specifications for the International Standard Book Number (ISBN) as a unique international identification system for each product form or edition of a monographic publication published or produced by a specific publisher. It specifies the construction of an ISBN, the rules for its assignment and use, the metadata to be associated with the ISBN allocation, and the administration of the ISBN Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2110:1980 - **Identifier:** ISO 2110:1980 _(verified: appears in the quote below)_ - **Item title:** Data communication — 25- pin DTE/DCE interface connector and pin assignments _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2110:1989 - **Withdrawn / published date:** 1980-07-01 _(verified: appears in the quote below)_ > 6900,IS,,ISO 2110:1980,Data communication — 25- pin DTE/DCE interface connector and pin assignments,Téléinformatique — Affectation des broches et description du connecteur 25 broches à la jonction entre ETTD et ETCD,1980-07-01,2,['35.100.10'],ISO/IEC JTC 1/SC 6,9599,,[6901],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21100:2014 - **Identifier:** ISO 21100:2014 _(verified: appears in the quote below)_ - **Item title:** Air cargo unit load devices — Performance requirements and test parameters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21100:2020 - **Withdrawn / published date:** 2014-08-25 _(verified: appears in the quote below)_ > 62839,IS,,ISO 21100:2014,Air cargo unit load devices — Performance requirements and test parameters,Unités de charge de fret aérien — Exigences de performances et paramètres d'essai,2014-08-25,1,"['49.100','49.120']",ISO/TC 20/SC 9,9599,[57240],[70674],['en'],42,"
The purpose ISO 21100:2014 is to establish the minimum requirements for airworthiness approval of air cargo pallets, nets and containers, generally designated as air cargo unit load devices.
ISO 21100:2014 defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that com Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21100:2020 - **Identifier:** ISO 21100:2020 _(verified: appears in the quote below)_ - **Item title:** Air cargo unit load devices — Performance requirements and test parameters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21100:2025 - **Withdrawn / published date:** 2020-06-30 _(verified: appears in the quote below)_ > 70674,IS,,ISO 21100:2020,Air cargo unit load devices — Performance requirements and test parameters,Unités de charge de fret aérien — Exigences de performances et paramètres d'essai,2020-06-30,2,"['49.100','49.120']",ISO/TC 20/SC 9,9599,[62839],[87165],['en'],46,"
This document specifies the minimum requirements for airworthiness approval of air cargo pallets, nets and containers, generally designated as air cargo unit load devices (ULD).
This document is intended to provide a uniform technical reference for air cargo unit load devices approval. As a prerequisite, it is presupposed that the applicable general civil aviation requirements and the aircraft manufacturer's approved Weight Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21107:2004 - **Identifier:** ISO 21107:2004 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by attribute vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21107:2015 - **Withdrawn / published date:** 2004-05-05 _(verified: appears in the quote below)_ > 34419,IS,,ISO 21107:2004,Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by attribute vocabulary,Roulements et rotules lisses — Structure de recherche pour supports électroniques — Caractéristiques et critères de performance identifiés par un vocabulaire particulier,2004-05-05,1,['21.100.01'],ISO/TC 4,9599,,[62973],"['en','fr']",37,"
ISO 21107:2004 establishes a search structure and an attribute vocabulary for identifying rolling bearings, spherical plain bearings, bearing housings and accessories, primarily with the aid of electronic media, such as the Internet. The methodology for using this Inter Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2111:1972 - **Identifier:** ISO 2111:1972 _(verified: appears in the quote below)_ - **Item title:** Data communication — Basic mode control procedures — Code independent information transfer _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2111:1985 - **Withdrawn / published date:** 1972-02-01 _(verified: appears in the quote below)_ > 6903,IS,,ISO 2111:1972,Data communication — Basic mode control procedures — Code independent information transfer,Téléinformatique — Procédures de commande en mode de base — Transfert des données indépendantes du code,1972-02-01,1,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[6904],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2112:1977 - **Identifier:** ISO 2112:1977 _(verified: appears in the quote below)_ - **Item title:** Plastics — Aminoplastic moulding materials — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2112:1990 - **Withdrawn / published date:** 1977-07-01 _(verified: appears in the quote below)_ > 6905,IS,,ISO 2112:1977,Plastics — Aminoplastic moulding materials — Specification,Plastiques — Matières à mouler aminoplastes — Spécification,1977-07-01,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[6906],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2112:1990 - **Identifier:** ISO 2112:1990 _(verified: appears in the quote below)_ - **Item title:** Plastics — Aminoplastic moulding materials — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14527-2:1999 | ISO 14528-3:1999 | ISO 14527-3:1999 | ISO 14528-1:1999 | ISO 14527-1:1999 | ISO 14528-2:1999 - **Withdrawn / published date:** 1990-09-13 _(verified: appears in the quote below)_ > 6906,IS,,ISO 2112:1990,Plastics — Aminoplastic moulding materials — Specification,Plastiques — Matières à mouler aminoplastes — Spécification,1990-09-13,2,['83.080.10'],ISO/TC 61/SC 12,9599,[6905],"[24613,24617,24614,24615,24612,24616]","['en','fr']",5,
Establishes a specification of four types of aminoplastic moulding materials classified according to the intended application: Type UF A - general purpose Type MF B - Hot water resistant Type MF C - Thermal resistant and electrical Type MF D - Impact resistant These types have been further subdivided into grades based on property levels and requirements. The property requirements of 9 grades of standardized aminoplastic moulding materials a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21127:2006 - **Identifier:** ISO 21127:2006 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — A reference ontology for the interchange of cultural heritage information _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21127:2014 - **Withdrawn / published date:** 2006-09-12 _(verified: appears in the quote below)_ > 34424,IS,,ISO 21127:2006,Information and documentation — A reference ontology for the interchange of cultural heritage information,Information et documentation — Une ontologie de référence pour l'échange d'informations du patrimoine culturel,2006-09-12,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[57832],"['en','fr']",108,"
ISO 21127:2006 establishes guidelines for the exchange of information between cultural heritage institutions. In simple terms this can be defined as the curated knowledge of museums.
A more detailed definition can be articulated by defining both the intended scope, a broad and maximally inclusive definition of general principles, and the practical scope, which is defined Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21127:2014 - **Identifier:** ISO 21127:2014 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — A reference ontology for the interchange of cultural heritage information _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21127:2023 - **Withdrawn / published date:** 2014-10-16 _(verified: appears in the quote below)_ > 57832,IS,,ISO 21127:2014,Information and documentation — A reference ontology for the interchange of cultural heritage information,Information et documentation — Une ontologie de référence pour l'échange d'informations du patrimoine culturel,2014-10-16,2,['35.240.30'],ISO/TC 46/SC 4,9599,[34424],[85100],"['en','fr']",104,"
ISO 21127:2014 establishes guidelines for the exchange of information between cultural heritage institutions. In simple terms, this can be defined as the information managed by museums, libraries, and archives.
The intended scope of this ISO 21127:2014 is defined as the exchange and integration of heterogeneous scientific documentation relating to museum collection Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2113:1981 - **Identifier:** ISO 2113:1981 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Woven fabrics — Basis for specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2113:1996 - **Withdrawn / published date:** 1981-04-01 _(verified: appears in the quote below)_ > 6907,IS,,ISO 2113:1981,Textile glass — Woven fabrics — Basis for specification,Verre textile — Tissus — Base de spécification,1981-04-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[25209],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2113:1996 - **Identifier:** ISO 2113:1996 _(verified: appears in the quote below)_ - **Item title:** Reinforcement fibres — Woven fabrics — Basis for a specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2113:2023 - **Withdrawn / published date:** 1996-05-23 _(verified: appears in the quote below)_ > 25209,IS,,ISO 2113:1996,Reinforcement fibres — Woven fabrics — Basis for a specification,Renforts — Tissus — Base de spécification,1996-05-23,2,['59.100.01'],ISO/TC 61/SC 13,9599,[6907],[84297],"['en','fr']",6,"
Provides a basis for a specification applicable to fabrics woven from yarn made from textile glass, carbon or aramid and generally used for plastics reinforcements. Replaces the first edition.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2113:1996/Cor 1:2003 - **Identifier:** ISO 2113:1996/Cor 1:2003 _(verified: appears in the quote below)_ - **Item title:** Reinforcement fibres — Woven fabrics — Basis for a specification — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2113:2023 - **Withdrawn / published date:** 2003-02-11 _(verified: appears in the quote below)_ > 37858,IS,Cor,ISO 2113:1996/Cor 1:2003,Reinforcement fibres — Woven fabrics — Basis for a specification — Technical Corrigendum 1,Renforts — Tissus — Base de spécification — Rectificatif technique 1,2003-02-11,2,['59.100.01'],ISO/TC 61/SC 13,9599,,[84297],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21138-1:2007 - **Identifier:** ISO 21138-1:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system _(verified: appears in the quote below)_ - **Status code:** 9599 - **Successor:** ISO 21138-1:2020 - **Withdrawn / published date:** 2007-10-22 _(verified: appears in the quote below)_ > 40026,IS,,ISO 21138-1:2007,"Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system","Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement sans pression enterrés — Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) — Partie 1: Spécifications des matières et critères de performance des tubes, raccords et système",2007-10-22,1,"['93.030',' Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21138-2:2007 - **Identifier:** ISO 21138-2:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A _(verified: appears in the quote below)_ - **Status code:** 9599 - **Successor:** ISO 21138-2:2020 - **Withdrawn / published date:** 2007-10-22 _(verified: appears in the quote below)_ > 40027,IS,,ISO 21138-2:2007,"Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A","Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement sans pression enterrés — Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) — Partie 2: Tubes et raccords avec une surface externe lisse, type A",2007-10-22,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21138-3:2007 - **Identifier:** ISO 21138-3:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B _(verified: appears in the quote below)_ - **Status code:** 9599 - **Successor:** ISO 21138-3:2020 - **Withdrawn / published date:** 2007-10-23 _(verified: appears in the quote below)_ > 40028,IS,,ISO 21138-3:2007,"Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B","Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement sans pression enterrés — Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) — Partie 3: Tubes et raccords avec une surface externe non lisse, type B",2007-10-23,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 1 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2114:1974 - **Identifier:** ISO 2114:1974 _(verified: appears in the quote below)_ - **Item title:** Plastics — Unsaturated polyester resins — Determination of acid value _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2114:1996 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 6908,IS,,ISO 2114:1974,Plastics — Unsaturated polyester resins — Determination of acid value,Matières plastiques — Résines de polyesters non saturés — Détermination de l'indice d'acide,1974-11-01,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[6909],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2114:1996 - **Identifier:** ISO 2114:1996 _(verified: appears in the quote below)_ - **Item title:** Plastics — Unsaturated polyester resins — Determination of partial acid value and total acid value _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2114:2000 - **Withdrawn / published date:** 1996-12-26 _(verified: appears in the quote below)_ > 6909,IS,,ISO 2114:1996,Plastics — Unsaturated polyester resins — Determination of partial acid value and total acid value,Plastiques — Résines de polyesters non saturés — Détermination de l'indice d'acide partiel et de l'indice d'acide total,1996-12-26,2,['83.080.10'],ISO/TC 61/SC 12,9599,[6908],[29827],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21148:2005 - **Identifier:** ISO 21148:2005 _(verified: appears in the quote below)_ - **Item title:** Cosmetics — Microbiology — General instructions for microbiological examination _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21148:2017 - **Withdrawn / published date:** 2005-10-21 _(verified: appears in the quote below)_ > 35693,IS,,ISO 21148:2005,Cosmetics — Microbiology — General instructions for microbiological examination,Cosmétiques — Microbiologie — Instructions générales pour les examens microbiologiques,2005-10-21,1,['07.100.40'],ISO/TC 217,9599,,[72239],"['en','fr','ru']",21,"ISO 21148:2005 gives general instructions for carrying out microbiological examinations of cosmetic products, in order to ensure their quality and safety, in accordance with an appropriate risk analysis (e.g. low water activity, hydro-alcoholic, extreme pH values).
Because of the large variety of products and potential uses within this field of application, these instructions might not be appropriate for some products in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21148:2005/Cor 1:2006 - **Identifier:** ISO 21148:2005/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Cosmetics — Microbiology — General instructions for microbiological examination — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21148:2017 - **Withdrawn / published date:** 2006-10-31 _(verified: appears in the quote below)_ > 45015,IS,Cor,ISO 21148:2005/Cor 1:2006,Cosmetics — Microbiology — General instructions for microbiological examination — Technical Corrigendum 1,Cosmétiques — Microbiologie — Instructions générales pour les examens microbiologiques — Rectificatif technique 1,2006-10-31,1,['07.100.40'],ISO/TC 217,9599,,[72239],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21149:2006 - **Identifier:** ISO 21149:2006 _(verified: appears in the quote below)_ - **Item title:** Cosmetics — Microbiology — Enumeration and detection of aerobic mesophilic bacteria _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21149:2017 - **Withdrawn / published date:** 2006-03-08 _(verified: appears in the quote below)_ > 35694,IS,,ISO 21149:2006,Cosmetics — Microbiology — Enumeration and detection of aerobic mesophilic bacteria,Cosmétiques — Microbiologie — Dénombrement et détection des bactéries aérobies mésophiles,2006-03-08,1,['07.100.40'],ISO/TC 217,9599,,[72240],"['en','fr','ru']",24,"
ISO 21149:2006 gives general guidelines for enumeration and detection of mesophilic aerobic bacteria present in cosmetics:
Because of the large variety of cosmetic products within this field of application, this method may not be appropriate for some products Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 2115:1976 - **Identifier:** ISO 2115:1976 _(verified: appears in the quote below)_ - **Item title:** Plastics — Aqueous dispersions of polymers and copolymers — Determination of white point temperature and minimum film-forming temperature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2115:1996 - **Withdrawn / published date:** 1976-06-01 _(verified: appears in the quote below)_ > 6911,IS,,ISO 2115:1976,Plastics — Aqueous dispersions of polymers and copolymers — Determination of white point temperature and minimum film-forming temperature,Matières plastiques — Dispersions aqueuses de polymères et copolymères — Détermination de la température de point blanc et de la température minimale de formation de film,1976-06-01,2,['83.080'],ISO/TC 61,9599,,[6910],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21150:2006 - **Identifier:** ISO 21150:2006 _(verified: appears in the quote below)_ - **Item title:** Cosmetics — Microbiology — Detection of Escherichia coli _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21150:2015 - **Withdrawn / published date:** 2006-04-19 _(verified: appears in the quote below)_ > 35695,IS,,ISO 21150:2006,Cosmetics — Microbiology — Detection of Escherichia coli,Cosmétiques — Microbiologie — Détection d'Escherichia coli,2006-04-19,1,['07.100.40'],ISO/TC 217,9599,,[68311],"['en','fr','ru']",15,"
ISO 21150:2006 gives general guidelines for the detection and identification of the specified microorganism Escherichia coli in cosmetic products. Microorganisms considered as specified in ISO 21150:2006 might differ from country to country according to national practices or regulations.
ISO 21150:2006 specifies a method that is based on the detection of Escherichia coli in a non-selective liquid medium (enrichment broth), followed by isolation on a selecti Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 21177:2023 - **Identifier:** ISO 21177:2023 _(verified: appears in the quote below)_ - **Item title:** Intelligent transport systems — ITS station security services for secure session establishment and authentication between trusted devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21177:2024 - **Withdrawn / published date:** 2023-04-07 _(verified: appears in the quote below)_ > 81067,IS,,ISO 21177:2023,Intelligent transport systems — ITS station security services for secure session establishment and authentication between trusted devices,Systèmes de transport intelligents — Services de sécurité des stations ITS pour l’établissement et l’authentification des sessions sécurisées entre dispositifs de confiance,2023-04-07,1,"['35.030','35.240.60','03.220.01']",ISO/TC 204,9599,[70056],[87225],"['en','fr']",100,"
This document contains specifications for a set of ITS station security services required to ensure the authenticity of the so
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21178:2005
- **Identifier:** ISO 21178:2005 _(verified: appears in the quote below)_
- **Item title:** Light conveyor belts — Determination of electrical resistances _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21178:2013
- **Withdrawn / published date:** 2005-11-09 _(verified: appears in the quote below)_
> 40043,IS,,ISO 21178:2005,Light conveyor belts — Determination of electrical resistances,Courroies transporteuses légères — Détermination des résistances électriques,2005-11-09,1,['53.040.10'],ISO/TC 41/SC 3,9599,,[61050],"['en','fr']",18," ISO 21178:2005 specifies test methods for determining the electrical resistances of light conveyor belts according to ISO 21183-1. The resistances are surface resistance, volume resistance perpendicular to the belt plane, and longitudinal and transverse volume resistance parallel to the belt plane. ISO 21178:2005 also specifies two test methods for determining the surface resistivity and the volume resistivity. ISO 21178:2013 specifies test methods for determining the electrical resistances of light conveyor belts according to ISO 21183-1. The resistances are surface resistance, volume resistance perpendicular to the belt plane, and longitudinal and transverse volume resistance parallel to the belt plane. ISO 21178:2013 also specifies two test methods for determining the surface resistivity and the volume resistivity. ISO 21179:2005 specifies a test method for the determination of the electrostatic field generated by a running light conveyor belt according to ISO 21183-1. ISO 21180:2005 specifies a test method for the determination of the maximum tensile strength of light conveyor belts according to ISO 21183-1, or of other conveyor belts where ISO 283 is not applicable. ISO 21181:2005 specifies a test method for the determination of the relaxed elastic modulus of light conveyor belts according to ISO 21183-1 or other conveyor belts where ISO 9856 is not applicable. ISo 21181:2013 specifies a test method for the determination of the relaxed elastic modulus of light conveyor belts according to ISO 21183-1 or other conveyor belts where ISO 9856 is not applicable. ISO 21182:2005 specifies test methods for determining the dynamic and static coefficients of friction for light conveyor belts according to ISO 21183-1. ISO 21182:2013 specifies test methods for determining the dynamic and static coefficients of friction for light conveyor belts according to ISO 21183-1. ISO 21183-2:2005 establishes a list of equivalent terms relating to light conveyor belts. ISO 21187|IDF 196:2004 gives guidelines for the establishment of a conversion relationship between the results of a routine method and an anchor method, and its verification for the
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21188:2006
- **Identifier:** ISO 21188:2006 _(verified: appears in the quote below)_
- **Item title:** Public key infrastructure for financial services — Practices and policy framework _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21188:2018
- **Withdrawn / published date:** 2006-04-21 _(verified: appears in the quote below)_
> 35707,IS,,ISO 21188:2006,Public key infrastructure for financial services — Practices and policy framework,Infrastructure de clé publique pour services financiers — Pratique et cadre politique,2006-04-21,1,['35.240.40'],ISO/TC 68/SC 2,9599,,[63134],"['en','ru']",107," ISO 21188:2006 sets out a framework of requirements to manage a PKI through certificate policies and certification practice statements and to enable the use of public key certificates in the financial services industry. It also defines control objectives and supporting procedures to manage risks. ISO 21188:2006 draws a distinction between PKI systems used in open, closed and contractual environments. It further defines
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2119:1972
- **Identifier:** ISO 2119:1972 _(verified: appears in the quote below)_
- **Item title:** Magnesium-zinc-zirconium alloy castings — Chemical composition _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 3115:1981
- **Withdrawn / published date:** 1972-02-01 _(verified: appears in the quote below)_
> 6912,IS,,ISO 2119:1972,Magnesium-zinc-zirconium alloy castings — Chemical composition,Pièces moulées en alliages magnésium-zinc- zirconium — Composition chimique,1972-02-01,1,"['77.150.60','77.150.20']",ISO/TC 79/SC 5,9599,,[8272],"['en','fr']",1,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 212:1973
- **Identifier:** ISO 212:1973 _(verified: appears in the quote below)_
- **Item title:** Essential oils — Sampling _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 212:2007
- **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_
> 4082,IS,,ISO 212:1973,Essential oils — Sampling,Huiles essentielles — Échantillonnage,1973-12-01,1,['71.100.60'],ISO/TC 54,9599,,[41973],"['en','fr']",3, The first operation of the sampling procedure is inspection of the consignment. Before sampling the contents of the containers shall be homogenized. In the case of large containers five partial samples shall be withdrawn from each container at different specified depths. For each container the five partial samples shall be bulked and homogenizied. From this bulk three representative samples shall be drawn. From other containers normally one partial sample shall be withdrawn. All partial samples taken from one consignment shall be bulked a
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21207:2004
- **Identifier:** ISO 21207:2004 _(verified: appears in the quote below)_
- **Item title:** Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21207:2015
- **Withdrawn / published date:** 2004-06-14 _(verified: appears in the quote below)_
> 34437,IS,,ISO 21207:2004,"Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying",Essais de corrosion en atmosphères artificielles — Essais de corrosion accélérée par expositions alternées à des gaz oxydants ou au brouillard salin neutre et à un séchage,2004-06-14,1,['77.060'],ISO/TC 156,9599,,[67053],"['en','fr']",10," ISO 21207:2004 defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter ro
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21207:2004/Cor 1:2008
- **Identifier:** ISO 21207:2004/Cor 1:2008 _(verified: appears in the quote below)_
- **Item title:** Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying — Technical Corrigendum 1 _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21207:2015
- **Withdrawn / published date:** 2008-02-27 _(verified: appears in the quote below)_
> 51176,IS,Cor,ISO 21207:2004/Cor 1:2008,"Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying — Technical Corrigendum 1",Essais de corrosion en atmosphères artificielles — Essais de corrosion accélérée par expositions alternées à des gaz oxydants ou au brouillard salin neutre et à un séchage — Rectificatif technique 1,2008-02-27,1,['77.060'],ISO/TC 156,9599,,[67053],"['en','fr']",2,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21207:2015
- **Identifier:** ISO 21207:2015 _(verified: appears in the quote below)_
- **Item title:** Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21207:2025
- **Withdrawn / published date:** 2015-12-02 _(verified: appears in the quote below)_
> 67053,IS,,ISO 21207:2015,"Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying",Essais de corrosion en atmosphères artificielles — Essais de corrosion accélérée par expositions alternées à des gaz corrosifs ou au brouillard salin neutre et à un séchage,2015-12-02,2,['77.060'],ISO/TC 156,9599,"[51176,34437]",[83214],"['en','fr']",9," ISO 21207:2015 defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21214:2006
- **Identifier:** ISO 21214:2006 _(verified: appears in the quote below)_
- **Item title:** Intelligent transport systems — Communications access for land mobiles (CALM) — Infra-red systems _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21214:2015
- **Withdrawn / published date:** 2006-06-21 _(verified: appears in the quote below)_
> 41104,IS,,ISO 21214:2006,Intelligent transport systems — Communications access for land mobiles (CALM) — Infra-red systems,Systèmes intelligents de transport — Accès aux communications des services mobiles terrestres (CALM) — Systèmes à infrarouges,2006-06-21,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[51523],['en'],106," ISO 21214:2006 determines the air interface using infra-red systems at 820 nm to 1 010 nm. It provides protocols and parameters for medium-range, medium- to high-speed wireless communications in the ITS sector using infra-red systems. Such links are required for quasi-continuous, prolonged or short communications ISO 21215:2010 provides specifications of the access layer (OSI layers 1 and 2 and the related management functionality) of a communication interface (CI) named 'CALM M5', operating in the 5 GHz microwave frequency range. ISO 21216:2011 covers the open systems interconnection (OSI) Layer 1 physical layer (PHY) air interface for a communications medium operating in the 60 GHz millimetric frequency range by providing the parameters for medium range, medium to high speed wireless communications in the ITS sector. It specifies the parameters required to interface the Layer
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21217:2010
- **Identifier:** ISO 21217:2010 _(verified: appears in the quote below)_
- **Item title:** Intelligent transport systems — Communications access for land mobiles (CALM) — Architecture _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21217:2014
- **Withdrawn / published date:** 2010-04-01 _(verified: appears in the quote below)_
> 50507,IS,,ISO 21217:2010,Intelligent transport systems — Communications access for land mobiles (CALM) — Architecture,Systèmes intelligents de transport — Accès aux communications des services mobiles terrestres (CALM) — Architecture,2010-04-01,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[61570],['en'],38," ISO 21217:2010 specifies the architectural communications framework of “Intelligent Transport Systems” (ITS) for the family of CALM-related International Standards. The architecture is described in an abstract way with several graphical views and examples. The graphical representations partly follow the ISO Open Systems Interconnection (OSI) principles. In addition to the requirement
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21217:2014
- **Identifier:** ISO 21217:2014 _(verified: appears in the quote below)_
- **Item title:** Intelligent transport systems — Communications access for land mobiles (CALM) — Architecture _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21217:2020
- **Withdrawn / published date:** 2014-03-19 _(verified: appears in the quote below)_
> 61570,IS,,ISO 21217:2014,Intelligent transport systems — Communications access for land mobiles (CALM) — Architecture,Systèmes intelligents de transport — Accès aux communications des services mobiles terrestres (CALM) — Architecture,2014-03-19,2,"['35.240.60','03.220.01']",ISO/TC 204,9599,[50507],[80257],"['en','fr']",50," ISO 21217:2014 describes the communications reference architecture of nodes called 'ITS station units' designed for deployment in intelligent transport systems (ITS) communication networks. The ITS station reference architecture is described in an abstract way. While ISO 21217:2014 describes a number of ITS station elements, whether or not a particular element is implem
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21218:2008
- **Identifier:** ISO 21218:2008 _(verified: appears in the quote below)_
- **Item title:** Intelligent transport systems — Communications access for land mobiles (CALM)— Medium service access points _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21218:2013
- **Withdrawn / published date:** 2008-08-05 _(verified: appears in the quote below)_
> 35723,IS,,ISO 21218:2008,Intelligent transport systems — Communications access for land mobiles (CALM)— Medium service access points,Systèmes·intelligents·de·transport·—·Accès·aux·communications·des·services·mobiles·terrestres (CALM) — Points d'accès au service moyen,2008-08-05,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[61569],['en'],72," ISO 21218:2008 determines the service access points of a communication interface (CI) as provided by the communication adaptation layer (CAL) for communication, and as provided by the CI management adaptation entity (CIMAE) for management of the CI. ISO 21218:2013 determines general technical details related to the access layer of the ITS station reference architecture specified in ISO 21217 which are applicable to all or several access layer technologies. ISO 21225-1:2018 specifies requirements and test methods for pipes and fittings which are part of plastics piping systems for the trenchless replacement of underground non-pressure and pressure drainage and s
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21225-2:2018
- **Identifier:** ISO 21225-2:2018 _(verified: appears in the quote below)_
- **Item title:** Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Replacement off the line by horizontal directional drilling and impact moling _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 11300-1:2026 | ISO 11301-1:2026
- **Withdrawn / published date:** 2018-03-28 _(verified: appears in the quote below)_
> 70114,IS,,ISO 21225-2:2018,Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Replacement off the line by horizontal directional drilling and impact moling,Systèmes de canalisations en plastique pour le remplacement sans tranchée des réseaux de canalisations enterrés — Partie 2: Remplacement hors ligne par forage horizontal dirigé et fonçage par fusée,2018-03-28,1,"['23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,"[85924,85928]","['en','fr']",19," ISO 21225-2:2018 specifies requirements and test methods for pipes and fittings which are part of plastics piping systems for the trenchless replacement of various underground pipeline ne
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21243:2008
- **Identifier:** ISO 21243:2008 _(verified: appears in the quote below)_
- **Item title:** Radiation protection — Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies — General principles and application to dicentric assay _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21243:2022
- **Withdrawn / published date:** 2008-08-27 _(verified: appears in the quote below)_
> 40088,IS,,ISO 21243:2008,Radiation protection — Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies — General principles and application to dicentric assay,Radioprotection — Critères de performance pour les laboratoires pratiquant le tri par cytogénétique en cas d'accident radiologique ou nucléaire affectant un grand nombre de personnes — Principes généraux et application aux dicentriques,2008-08-27,1,"['13.280','27.120.20']",ISO/TC 85/SC 2,9599,,[78139],"['en','fr']",21," ISO 21243:2008 is to give an overview of the minimum requirements of process and quality-control components of the cytogenetic resp
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21247:2005
- **Identifier:** ISO 21247:2005 _(verified: appears in the quote below)_
- **Item title:** Combined accept-zero sampling systems and process control procedures for product acceptance _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 28594:2017
- **Withdrawn / published date:** 2005-04-01 _(verified: appears in the quote below)_
> 34445,IS,,ISO 21247:2005,Combined accept-zero sampling systems and process control procedures for product acceptance,Systèmes d'échantillonnage de tolérance zéro-défaut et procédures de maîtrise des processus combinés pour l'acceptation de produits,2005-04-01,1,['03.120.30'],ISO/TC 69/SC 5,9599,,[64627],"['en','fr']",41," ISO 21247:2005 provides a set of accept-zero sampling systems and procedures for planning and conducting inspections to assess quality and conformance to specified requirements. In addition, ISO 21247:2005 provides requirements for alternative acceptance methods proposed by the supplier. Such alternative methods would be based upon establishing and implementing an i
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2125:1975
- **Identifier:** ISO 2125:1975 _(verified: appears in the quote below)_
- **Item title:** Withdrawal of ISO 2125-1975 _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 7149:1982
- **Withdrawn / published date:** 1975-10-01 _(verified: appears in the quote below)_
> 6918,IS,,ISO 2125:1975,Withdrawal of ISO 2125-1975,Annulation de l'ISO 2125-1975,1975-10-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21254-1:2011
- **Identifier:** ISO 21254-1:2011 _(verified: appears in the quote below)_
- **Item title:** Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 1: Definitions and general principles _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO/WD 21254-1 | ISO 21254-1:2025 | ISO/PWI 21254-1
- **Withdrawn / published date:** 2011-07-15 _(verified: appears in the quote below)_
> 43001,IS,,ISO 21254-1:2011,Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 1: Definitions and general principles,Lasers et équipements associés aux lasers — Méthodes d'essai du seuil d'endommagement provoqué par laser — Partie 1: Définitions et principes de base,2011-07-15,1,['31.260'],ISO/TC 172/SC 9,9599,"[19232,21142]","[70725,83937,77721]","['en','fr']",16," ISO 21254-1:2011 defines terms used in conjunction with, and the general principles of, test methods for determining the laser-induced damage threshold and for the assurance of optical laser components subjected to laser radiation. This document specifies a method for the determination of the residual acrylonitrile monomer and styrene monomer in polymer polyols by gas chromatography. The measurements apply in the most common cases to anodic oxide coatings having a thickness more than 10 m, or from 5 m with an even surface. The use of the measurement is limited by two factors: an opaque coating and an uneven surface. ISO 21307:2009 establishes general principles for the process used in the construction and quality assessment of butt fusion joints incorporating fittings (ISO 8085-2) and pipes used in the co
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21307:2011
- **Identifier:** ISO 21307:2011 _(verified: appears in the quote below)_
- **Item title:** Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21307:2017
- **Withdrawn / published date:** 2011-05-12 _(verified: appears in the quote below)_
> 57052,IS,,ISO 21307:2011,Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems,Tubes et raccords en matières plastiques — Modes opératoires d'assemblage par soudage bout à bout de tubes et raccords en polyéthylène (PE) utilisés pour la construction de systèmes de distribution de gaz et d'eau,2011-05-12,2,"['23.040.45','93.025','23.040.20','75.200']",ISO/TC 138/SC 4,9599,[40607],[63773],"['en','ru']",12," ISO 21307:2011 establishes general principles regarding the procedure used in the construction and quality assessment of butt fusion joints incorporating fittings (ISO 8085-2) an
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21308-2:2006
- **Identifier:** ISO 21308-2:2006 _(verified: appears in the quote below)_
- **Item title:** Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 2: Dimensional bodywork exchange parameters _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21308-2:2020
- **Withdrawn / published date:** 2006-08-28 _(verified: appears in the quote below)_
> 37809,IS,,ISO 21308-2:2006,Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 2: Dimensional bodywork exchange parameters,Véhicules routiers — Échange de données de produit entre les fabricants de châssis et de carrosseries (BEP) — Partie 2: Paramètres dimensionnels d'échange de carrosserie,2006-08-28,1,['43.080.01'],ISO/TC 22/SC 40,9599,,[70351],['en'],63," ISO 21308-2:2006 provides a set of codes for the exchange of dimensional data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial vehicles as defined in ISO 3833, having a maximum gross vehicle mass above 3 500 kg. The process of exchanging the above
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21308-3:2007
- **Identifier:** ISO 21308-3:2007 _(verified: appears in the quote below)_
- **Item title:** Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 3: General, mass and administrative exchange parameters _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21308-3:2020
- **Withdrawn / published date:** 2007-02-14 _(verified: appears in the quote below)_
> 37810,IS,,ISO 21308-3:2007,"Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 3: General, mass and administrative exchange parameters","Véhicules routiers — Échange de données de produit entre les fabricants de châssis et de carrosseries (BEP) — Partie 3: Paramètres d'échange généraux, de masse et administratifs",2007-02-14,1,['43.080.01'],ISO/TC 22/SC 40,9599,,[70352],['en'],15," ISO 21308-3:2007 provides codes for the exchange of general, mass and administrative information. It applies to commercial vehicles, as defined in ISO 3833, having a maximum gross vehicle mass above 3 500 kg. The process of exchanging the above information can in
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21315:2018
- **Identifier:** ISO 21315:2018 _(verified: appears in the quote below)_
- **Item title:** Traditional Chinese medicine — Ganoderma lucidum fruiting body _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21315:2026
- **Withdrawn / published date:** 2018-12-20 _(verified: appears in the quote below)_
> 70519,IS,,ISO 21315:2018,Traditional Chinese medicine — Ganoderma lucidum fruiting body,Médecine traditionnelle chinoise — Organe fructifère de Ganoderma lucidum,2018-12-20,1,['11.120.10'],ISO/TC 249/SC 1,9599,,[89768],['en'],15, This document specifies minimum requirements and test methods for Ganoderma lucidum fruiting body that is derived from Ganoderma lucidum (Leyss. ex Fr.) Karst. It is applicable to Ganoderma lucidum fruiting body that is sold and used as Chinese materia medica (whole medicinal materials) and decoction pieces derived from this fungus. This document specifies the minimum requirements and test methods for Isatis indigotica root derived from the plant Isatis indigotica Fort. It is applicable to Isatis indigotica roots that are sold as Chinese material medica (whole medicinal materials) and decoction pieces derived from this plant. ISO 21347:2005 establishes general requirements for the application of fracture control technology to fracture critical items (FCIs) fabricated by metallic, non-metallic or composite materials. It also establishes mechanical damage control requirements for mechanical damage critical items (MDCIs) fabricated by composite materials. These requirements, when implemented on a particular space system, may assure a high level of confidence in achieving safe operation and mission success. T
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21349:2007
- **Identifier:** ISO 21349:2007 _(verified: appears in the quote below)_
- **Item title:** Space systems — Project reviews _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21349:2023
- **Withdrawn / published date:** 2007-07-05 _(verified: appears in the quote below)_
> 40780,IS,,ISO 21349:2007,Space systems — Project reviews,Systèmes spatiaux — Revue des projets,2007-07-05,1,['49.140'],ISO/TC 20/SC 14,9599,,[84724],['en'],19," ISO 21349:2007 provides process requirements for project reviews as a set of required functions. The requirements and recommendations cover the function inputs, outputs, mechanisms, and controlling conditions. It is intended for use in implementing the review requirements of ISO 14300-1, ISO 14300-2, ISO 15865, and such other space systems and operations standards that require formal reviews. ISO 21349:2007 specifies the responsibilities of a review board and gives guidance concerning review board composition. IS
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2135:1976
- **Identifier:** ISO 2135:1976 _(verified: appears in the quote below)_
- **Item title:** Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2135:1984
- **Withdrawn / published date:** 1976-11-01 _(verified: appears in the quote below)_
> 6925,IS,,ISO 2135:1976,Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings,Anodisation de l'aluminium et de ses alliages — Essai accéléré de résistance à la lumière des couches anodiques colorées,1976-11-01,1,['25.220.20'],ISO/TC 79,9599,,[6926],"['en','fr']",1,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2135:1984
- **Identifier:** ISO 2135:1984 _(verified: appears in the quote below)_
- **Item title:** Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxide coatings using artificial light _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2135:2010 | ISO/WD 2135
- **Withdrawn / published date:** 1984-02-01 _(verified: appears in the quote below)_
> 6926,IS,,ISO 2135:1984,Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxide coatings using artificial light,Anodisation de l'aluminium et de ses alliages — Essai accéléré de solidité à la lumière artificielle des couches anodiques colorées,1984-02-01,2,['25.220.20'],ISO/TC 79/SC 2,9599,[6925],"[51485,1114]","['en','fr']",2," For evaluating light fastness on exterior exposure, only outdoor exposure under conditions comparable to actual service is completely satisfactory. The testing is suitable as a quality control test of coloured anodic oxide coatings whose light fastness number has already been established by means of outdoor exposure testin
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2135:2010
- **Identifier:** ISO 2135:2010 _(verified: appears in the quote below)_
- **Item title:** Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2135:2017
- **Withdrawn / published date:** 2010-02-02 _(verified: appears in the quote below)_
> 51485,IS,,ISO 2135:2010,Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light,Anodisation de l'aluminium et de ses alliages — Essai accéléré de solidité à la lumière artificielle des couches d'oxydation anodique colorées,2010-02-02,3,['25.220.20'],ISO/TC 79/SC 2,9599,[6926],[70149],['en'],4," ISO 2135:2010 specifies an accelerated test method for assessing the fastness, using artificial light, of coloured anodic oxidation coatings on aluminium and its alloys. For evaluating light fastness on exterior exposure, only outdoor exposure under conditions comparable to actual service is completely satisfactory
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2135:2017
- **Identifier:** ISO 2135:2017 _(verified: appears in the quote below)_
- **Item title:** Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2135:2024
- **Withdrawn / published date:** 2017-10-09 _(verified: appears in the quote below)_
> 70149,IS,,ISO 2135:2017,Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light,Anodisation de l'aluminium et de ses alliages — Essai accéléré de solidité à la lumière artificielle des couches d'oxydation anodique colorées,2017-10-09,4,['25.220.20'],ISO/TC 79/SC 2,9599,[51485],[88294],['en'],6," ISO 2135 specifies an accelerated test method for assessing the fastness, using artificial light, of coloured anodic oxidation coatings on aluminium and its alloys. For evaluating light fastness on exterior exposure, only outdoor exposure under conditions comparable with actual service is completely satisfactory.<
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21350:2007
- **Identifier:** ISO 21350:2007 _(verified: appears in the quote below)_
- **Item title:** Space systems — Off-the-shelf item utilization _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21350:2023
- **Withdrawn / published date:** 2007-08-22 _(verified: appears in the quote below)_
> 43454,IS,,ISO 21350:2007,Space systems — Off-the-shelf item utilization,Systèmes spatiaux — Utilisation d'équipement prêt à l'emploi,2007-08-22,1,['49.140'],ISO/TC 20/SC 14,9599,,[84725],['en'],14," ISO 21350:2007 contains requirements and guidelines for the utilization of off-the-shelf (OTS) items, their selection, acquisition, integration, qualification and implementation related to a space product or system. Specifically excluded are piece parts and materials, such as electrical, electronic and electromechanical (EEE) parts, thermocouples, rivets, fasteners, connectors, fittings, adhesives, insulation, wiring and plumbing. ISO 21358:2007 defines dimensions of right-angle valves that are compatible with the mounting dimensions of elbows defined in ISO 9803-1 and ISO 9803-2. ISO 21358:2007 covers right-angle valves with flanges defined in ISO 2861-1, ISO 1609 and ISO 3669. ISO 3669 lists two flange series: ISO 21358:2007 covers only the valves with flanges of the seco
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21360-1:2012
- **Identifier:** ISO 21360-1:2012 _(verified: appears in the quote below)_
- **Item title:** Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 1: General description _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21360-1:2020
- **Withdrawn / published date:** 2012-04-20 _(verified: appears in the quote below)_
> 59991,IS,,ISO 21360-1:2012,Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 1: General description,Technique du vide — Méthodes normalisées pour mesurer les performances des pompes à vide — Partie 1: Description générale,2012-04-20,1,['23.160'],ISO/TC 112,9599,[40197],[79940],"['en','fr']",26,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21360-2:2012
- **Identifier:** ISO 21360-2:2012 _(verified: appears in the quote below)_
- **Item title:** Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 2: Positive displacement vacuum pumps _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21360-2:2020
- **Withdrawn / published date:** 2012-04-20 _(verified: appears in the quote below)_
> 50844,IS,,ISO 21360-2:2012,Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 2: Positive displacement vacuum pumps,Technique du vide — Méthodes normalisées pour mesurer les performances des pompes à vide — Partie 2: Pompes à vide volumétriques,2012-04-20,1,['23.160'],ISO/TC 112,9599,"[6200,6202]",[79941],"['en','fr']",16," This part of ISO 21360 specifies methods for measuring the volume flow rate, base pressure, water vapour tolerance, power consumption, and the lowest start-up temperature of positive displacement vacuum pumps, which discharge gas against atmospheric pressure and with a usual base pressure <10 kPa. In this part of ISO 2
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21360:2007
- **Identifier:** ISO 21360:2007 _(verified: appears in the quote below)_
- **Item title:** Vacuum technology — Standard methods for measuring vacuum-pump performance — General description _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21360-1:2012
- **Withdrawn / published date:** 2007-05-31 _(verified: appears in the quote below)_
> 40197,IS,,ISO 21360:2007,Vacuum technology — Standard methods for measuring vacuum-pump performance — General description,Technique du vide — Méthodes normalisées pour mesurer les performances des pompes à vide — Description générale,2007-05-31,1,['23.160'],ISO/TC 112,9599,,[59991],['en'],27," ISO 21360:2007 is a basic standard which defines three different methods for measuring the volume flow rate and one method each for measuring the base pressure, the compression ratio and the critical backing pressure of a vacuum pump. The choice of the required measurement methods depends on the properties of the specific kinds of vacuum pump, e.g. the measurement of the critical backing pressu
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21368:2005
- **Identifier:** ISO 21368:2005 _(verified: appears in the quote below)_
- **Item title:** Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21368:2022
- **Withdrawn / published date:** 2005-09-23 _(verified: appears in the quote below)_
> 34493,IS,,ISO 21368:2005,Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures,Adhésifs — Lignes directrices pour la fabrication des structures collées par adhésifs et procédures pour l'établissement de rapports pour l'évaluation des risques liés à ces structures,2005-09-23,1,['83.180'],ISO/TC 61/SC 11,9599,,[77454],"['en','fr']",16," ISO 21368:2005 provides guidelines describing adhesive bonding quality requirements suitable for use by manufacturers utilizing adhesive bonding as a means of fabrication. In particular, the guidelines define various approaches to meeting quality requirements for
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2137:1972
- **Identifier:** ISO 2137:1972 _(verified: appears in the quote below)_
- **Item title:** Petroleum products — Lubricating grease — Determination of cone penetration _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 2137:1985
- **Withdrawn / published date:** 1972-09-01 _(verified: appears in the quote below)_
> 6928,IS,,ISO 2137:1972,Petroleum products — Lubricating grease — Determination of cone penetration,Produits pétroliers — Graisses lubrifiantes — Détermination de la pénétrabilité au cône,1972-09-01,1,['75.100'],ISO/TC 28,9599,,[6929],"['en','fr']",10,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 2137:1985
- **Identifier:** ISO 2137:1985 _(verified: appears in the quote below)_
- **Item title:** Petroleum products — Lubricating grease and petrolatum — Determination of cone penetration _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO/WD 2137 | ISO 2137:2007
- **Withdrawn / published date:** 1985-11-07 _(verified: appears in the quote below)_
> 6929,IS,,ISO 2137:1985,Petroleum products — Lubricating grease and petrolatum — Determination of cone penetration,Produits pétroliers — Graisse lubrifiante et pétrolatum — Détermination de la pénétrabilité au cône,1985-11-07,2,"['75.140','75.100']",ISO/TC 28,9599,[6928],"[27551,45650]","['en','fr']",15," Section One gives four procedures for determination of the consistency by measurement of the penetration of a standard cone. Section Two gives methods, when only small samples are available, by the use of cones a half or quarter scale of that used in Section One. The methods are applicable to penetrations of 175 to 385 units. They are not intended to replace the full-scale penetration. ISO 2137:2007 specifies several methods for the empirical estimation of the consistency of lubricating greases and petrolatum by measuring the penetration of a standardized cone. Four procedures are specified for determining the consistency of lubricating greases by measuring the penetration of a full-scale cone for unworked, worked, prolonged worked and b
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 21370:2019
- **Identifier:** ISO 21370:2019 _(verified: appears in the quote below)_
- **Item title:** Traditional Chinese medicine — Dendrobium officinale stem _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 21370:2026
- **Withdrawn / published date:** 2019-02-05 _(verified: appears in the quote below)_
> 70792,IS,,ISO 21370:2019,Traditional Chinese medicine — Dendrobium officinale stem,Médecine traditionnelle chinoise — Tige de Dendrobium officinale,2019-02-05,1,['11.120.10'],ISO/TC 249/SC 1,9599,,[91423],['en'],15, This document specifies minimum requirements and test methods for Dendrobium officinale stem that is derived from cultivated Dendrobium officinale Kimura et Migo. It is applicable to Dendrobium officinale stem that is sold and used as Chinese materia medica (whole medicinal materials) and decoction pieces derived from this plant.