ISO 19581 specifies a screening test method to quantify rapidly the activity concentration of gamma-emitting radionuclides, such as 131I, 132Te, 134Cs and 137Cs, in solid or liquid test samples using gamma-ray spectrometry with lower resolution scintillation d Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1959:1973 - **Identifier:** ISO 1959:1973 _(verified: appears in the quote below)_ - **Item title:** Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8543:1986 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 6689,IS,,ISO 1959:1973,Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio,Tapis-moquettes — Détermination de la masse volumique du velours de surface et de la densité de fibres dans le velours,1973-12-01,1,['97.150'],ISO/TC 219,9599,,[15793],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19600:2014 - **Identifier:** ISO 19600:2014 _(verified: appears in the quote below)_ - **Item title:** Compliance management systems — Guidelines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 37301:2021 - **Withdrawn / published date:** 2014-12-05 _(verified: appears in the quote below)_ > 62342,IS,,ISO 19600:2014,Compliance management systems — Guidelines,Systèmes de management de la compliance — Lignes directrices,2014-12-05,1,"['03.100.70','03.100.01']",ISO/TC 309,9599,,[75080],"['en','fr','ru']",28,"
ISO 19600:2014 provides guidance for establishing, developing, implementing, evaluating, maintaining and improving an effective and responsive compliance management system within an organization.
The guidelines on compliance management systems are applicable to all types of organizations. The extent of the application of these guidelines depends on the size, structure, nature and complexity of the organization. ISO 19600:2014 is based on the principles of good governan Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19606:2017 - **Identifier:** ISO 19606:2017 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19606:2024 - **Withdrawn / published date:** 2017-01-13 _(verified: appears in the quote below)_ > 65457,IS,,ISO 19606:2017,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy",Céramiques techniques — Méthode d'essai pour la rugosité de surface des films céramique fins par microscopie à force atomique,2017-01-13,1,['81.060.30'],ISO/TC 206,9599,,[85556],['en'],24,"
ISO 19606:2017 describes a method to evaluate the adequateness of a probe tip for fine-ceramic thin-film surface roughness measurements by atomic force microscopy, of surfaces with an arithmetical mean roughness, Ra, in the range of about 1 nm to 30 nm and a mean width of roughness profile elements, RSm, in the range Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19618:2017 - **Identifier:** ISO 19618:2017 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19618:2025 - **Withdrawn / published date:** 2017-02-14 _(verified: appears in the quote below)_ > 65505,IS,,ISO 19618:2017,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer",Céramiques techniques — Méthode de mesure de l'émissivité spectrale normale utilisant un corps noir de référence avec un spectromètre FTIR,2017-02-14,1,['81.060.30'],ISO/TC 206,9599,,[86489],['en'],13,"
ISO 19618:2017 specifies a method used for the determination of normal spectral emissivity and normal quasi-total emissivity of fine ceramics using blackbody reference with a Fourier transform infrared spectrometer (FTIR) at elevated temperatures. This method is applicable to fine ceramics, ceramic m Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19628:2017 - **Identifier:** ISO 19628:2017 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of specific heat capacity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19628:2024 - **Withdrawn / published date:** 2017-04-25 _(verified: appears in the quote below)_ > 65569,IS,,ISO 19628:2017,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of specific heat capacity",Céramiques techniques — Propriétés thermophysiques des composites céramiques — Détermination de la capacité thermique specifique,2017-04-25,1,['81.060.30'],ISO/TC 206,9599,,[86683],"['en','fr']",26,"
ISO 19628:2017 describes two methods for the determination of the specific heat capacity of ceramic matrix composites with continuous reinforcements (1D, 2D, 3D).
Unidirectional (1D), bi-directional (2D) and tridirectional (XD, with 2 < x ≤ 3).
The two methods are:
- method A: drop calori Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19630:2017 - **Identifier:** ISO 19630:2017 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for reinforcements — Determination of tensile properties of filaments at ambient temperature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19630:2025 - **Withdrawn / published date:** 2017-07-10 _(verified: appears in the quote below)_ > 65571,IS,,ISO 19630:2017,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for reinforcements — Determination of tensile properties of filaments at ambient temperature",Céramiques techniques — Méthodes d'essai pour renforts — Détermination des propriétés en traction du filament à température ambiante,2017-07-10,1,['81.060.30'],ISO/TC 206,9599,,[86488],"['en','fr']",10,"
ISO 19630:2017 specifies the conditions for the determination of tensile properties of single filaments of ceramic fibre such as tensile strength, Young modulus and fracture strain. The method applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, which have str Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19634:2017 - **Identifier:** ISO 19634:2017 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Notations and symbols _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19634:2026 | ISO/PWI 19634 - **Withdrawn / published date:** 2017-10-20 _(verified: appears in the quote below)_ > 65572,IS,,ISO 19634:2017,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Notations and symbols",Céramiques techniques — Céramiques composites — Notations et symboles,2017-10-20,1,['81.060.30'],ISO/TC 206,9599,,"[88409,77115]","['en','fr']",13,"
ISO 19634:2017 defines the symbols to be used to represent physical, mechanical and thermal characteristics, as determined by methods described in relevant ISO publications, for ceramic matrix composites. It is aimed at avoiding confusion in reporting measurements and characteristics of products.
Where possible, the definitions are in accordance with the relevant parts of ISO 80000. In addition, the symbo Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1964:1975 - **Identifier:** ISO 1964:1975 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Indication of details on the general arrangement plans of ships _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1964:1987 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 6691,IS,,ISO 1964:1975,Shipbuilding — Indication of details on the general arrangement plans of ships,Construction navale — Figuration des détails sur les plans généraux d'installation des navires,1975-11-01,1,"['01.080.30','47.020.01']",ISO/TC 8,9599,,[6692],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19642-1:2019 - **Identifier:** ISO 19642-1:2019 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19642-1:2023 - **Withdrawn / published date:** 2019-04-23 _(verified: appears in the quote below)_ > 65619,IS,,ISO 19642-1:2019,Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines,Véhicules routiers — Cables automobiles — Partie 1: Vocabulaire et lignes directrices pour la conception,2019-04-23,1,"['43.040.10','01.040.43']",ISO/TC 22/SC 32,9599,,[81326],['en'],21,"
This document defines terms in the field of cables applied in road vehicle general purpose applications, for use in the other parts of the ISO 19642 series.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19642-2:2019 - **Identifier:** ISO 19642-2:2019 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Automotive cables — Part 2: Test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19642-2:2023 - **Withdrawn / published date:** 2019-01-30 _(verified: appears in the quote below)_ > 66299,IS,,ISO 19642-2:2019,Road vehicles — Automotive cables — Part 2: Test methods,Véhicules routiers — Cables automobiles — Partie 2: Méthodes d'essai,2019-01-30,1,['43.040.10'],ISO/TC 22/SC 32,9599,,[81327],['en'],58,"This document defines test methods for electrical cables in road vehicles, which are used in other parts of the ISO 19642 series.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1966:1973 - **Identifier:** ISO 1966:1973 _(verified: appears in the quote below)_ - **Item title:** Crimped joints for aircraft electrical cables _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1966:2026 | ISO/WD 1966 - **Withdrawn / published date:** 1973-02-01 _(verified: appears in the quote below)_ > 6694,IS,,ISO 1966:1973,Crimped joints for aircraft electrical cables,Raccordements sertis pour câbles électriques utilisés à bord des aéronefs,1973-02-01,1,['49.060'],ISO/TC 20/SC 1,9599,,"[88498,33492]","['en','fr']",7,"Describes the design requirements and tests for the crimping of insulated and non-insulated terminations to general purpose cables, with conductors of copper, copper alloy, aluminium or aluminium alloy, in locations in which the stabilized conductor temperature does not exceed the values specified for the relevant type, i. e. 105 °C, 190 °C or 260 °C. The type of cable with which the terminations are intended to be made has to be declared.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19674:2017 - **Identifier:** ISO 19674:2017 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19674:2025 - **Withdrawn / published date:** 2017-08-17 _(verified: appears in the quote below)_ > 65990,IS,,ISO 19674:2017,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula","Céramiques fines (céramiques avancées, céramiques techniques avancées) — Méthodes d'essai des revêtements céramiques — Détermination de la contrainte interne des revêtements céramiques par application de la formule de Stoney",2017-08-17,1,['81.060.30'],ISO/TC 206,9599,,[88562],['en'],10,ISO 19674:2017 specifies a method for the determination of the internal stress in thin ceramic coatings by application of the Stoney formula to the results obtained from measurement of th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19679:2016 - **Identifier:** ISO 19679:2016 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19679:2020 - **Withdrawn / published date:** 2016-08-15 _(verified: appears in the quote below)_ > 66003,IS,,ISO 19679:2016,Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide,Plastiques — Détermination de la biodégradation aérobie des matières plastiques non-flottantes à l'interface eau de mer/sédiments — Méthode par analyse du dioxyde de carbone libéré,2016-08-15,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[78889],"['en','fr']",11,"
ISO 19679:2016 specifies a test method to determine the degree and rate of aerobic biodegradation of plastic materials when settled on marine sandy sediment at the interface between seawater and the seafloor, by measuring the evolved carbon dioxide. 6697,IS,,ISO 1968:1973,Ropes and cordage — Vocabulary,Cordages et articles de corderie — Vocabulaire,1973-09-01,3,"['59.080.50','01.040.59']",ISO/TC 38,9599,,[23038],"['en','fr']",4,"
Defines terms relating to ropes and cordage. These terms are, in particular, for use in the drafting of other International Standards dealing with specification or testing of ropes. General terminology for the textile industry and terms defining specific ropes for the fishing industry, for agriculture, for marine use, etc. are not covered by this document. - Replaces ISO Recommendation R 1968-1971.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19683:2017 - **Identifier:** ISO 19683:2017 _(verified: appears in the quote below)_ - **Item title:** Space systems — Design qualification and acceptance tests of small spacecraft and units _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19683:2026 - **Withdrawn / published date:** 2017-08-14 _(verified: appears in the quote below)_ > 66008,IS,,ISO 19683:2017,Space systems — Design qualification and acceptance tests of small spacecraft and units,Systèmes spatiaux — Qualification de la conception et essais de réception des petits véhicules spatiaux,2017-08-14,1,['49.140'],ISO/TC 20/SC 14,9599,,[86540],['en'],85,"ISO 19683:2017 provides test methods and test requirements for design qualification and/or acceptance of small spacecraft or units. It provides the minimum test requirements and test methods to qualify the design and manufacturing methods of commercial small spacecraft and their units and to accept the final products.
ISO 19683:2017 places emphasis on achieving reliability against infant mortality after sa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1969:1976 - **Identifier:** ISO 1969:1976 _(verified: appears in the quote below)_ - **Item title:** Ropes and cordage — Three-strand polyethylene monofilament ropes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1969:1990 - **Withdrawn / published date:** 1976-04-01 _(verified: appears in the quote below)_ > 6698,IS,,ISO 1969:1976,Ropes and cordage — Three-strand polyethylene monofilament ropes,Cordages en monofilaments de polyéthylène à trois torons,1976-04-01,1,['59.080.50'],ISO/TC 38,9599,,[6699],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1969:1990 - **Identifier:** ISO 1969:1990 _(verified: appears in the quote below)_ - **Item title:** Ropes — Polyethylene — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1969:2004 - **Withdrawn / published date:** 1990-11-01 _(verified: appears in the quote below)_ > 6699,IS,,ISO 1969:1990,Ropes — Polyethylene — Specification,Cordages — Polyéthylène — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[6698],[36584],"['en','fr']",3,"
Specifies the main characteristics of 3- and 4-strand laid ropes and gives rules for their designation. Relates to the definitions given in ISO 1968. The main characteristics are shown in a table. This second edition cancels and replaces the first edition ISO 1969:1976, of which it constitutes a technical revision.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19697:2016 - **Identifier:** ISO 19697:2016 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Navigation and ship operations — Electronic inclinometers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19697:2026 - **Withdrawn / published date:** 2016-11-08 _(verified: appears in the quote below)_ > 68196,IS,,ISO 19697:2016,Ships and marine technology — Navigation and ship operations — Electronic inclinometers,Navires et technologie maritime — Navigation et opérations maritimes — Inclinomètres électroniques,2016-11-08,1,['47.020.70'],ISO/TC 8/SC 6,9599,[66096],[85756],['en'],19,"ISO 19697:2016 specifies the performance requirements, methods of testing and test results of electronic inclinometers required by the performance standard, IMO resolution MSC.363 (92), in addition to the general requirements contained in resolution A.694 (17) and is associated with IEC 60945.
The electronic inclinometers provide information about actual heel angle, roll amplitude, roll period to suppor Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19701:2005 - **Identifier:** ISO 19701:2005 _(verified: appears in the quote below)_ - **Item title:** Methods for sampling and analysis of fire effluents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19701:2013 - **Withdrawn / published date:** 2005-06-23 _(verified: appears in the quote below)_ > 33862,IS,,ISO 19701:2005,Methods for sampling and analysis of fire effluents,Méthodes d'échantillonnage et d'analyse des effluents du feu,2005-06-23,1,['13.220.01'],ISO/TC 92/SC 3,9599,[16719],[51334],"['en','fr']",78,
ISO 19701:2005 presents a range of sampling and chemical analytical methods suitable for the analysis of individual chemical species in fire atmospheres. The procedures relate to the analysis of samples extracted from an apparatus or effluent flow from a fire test rig or physical fire test model and are not concerned with the specific nature of the fire test.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19702:2006 - **Identifier:** ISO 19702:2006 _(verified: appears in the quote below)_ - **Item title:** Toxicity testing of fire effluents — Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 19702 | ISO 19702:2015 - **Withdrawn / published date:** 2006-01-20 _(verified: appears in the quote below)_ > 33863,IS,,ISO 19702:2006,Toxicity testing of fire effluents — Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis,Essais de toxicité des effluents du feu — Lignes directrices pour l'analyse des gaz et des vapeurs dans les effluents du feu par spectroscopie infrarouge à transformée de Fourier (IRTF),2006-01-20,1,['13.220.01'],ISO/TC 92/SC 3,9599,,"[53420,63169]","['en','fr']",34,"ISO 19702:2005 specifies methods for the individual analysis of airborne concentrations of carbon monoxide (CO), carbon dioxide (CO2), hydrogen cyanide (HCN), hydrogen chloride (HCl), hydrogen bromide (HBr), nitric oxide (NO), nitrogen dioxide (NO2), and acrol Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19702:2015 - **Identifier:** ISO 19702:2015 _(verified: appears in the quote below)_ - **Item title:** Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19702:2024 - **Withdrawn / published date:** 2015-08-04 _(verified: appears in the quote below)_ > 63169,IS,,ISO 19702:2015,Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy,Lignes directrices pour l'analyse des gaz et des vapeurs dans les effluents du feu par spectroscopie infrarouge à transformée de Fourier (IRTF),2015-08-04,2,['13.220.01'],ISO/TC 92/SC 3,9599,[33863],[83243],"['en','fr']",67,"
ISO 19702:2015 specifies requirements and makes recommendations for sampling systems for use in small and large-scale fire tests, for the selection of parameters and use of the FTIR instrument itself and for collection and use of calibration spectra.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19703:2005 - **Identifier:** ISO 19703:2005 _(verified: appears in the quote below)_ - **Item title:** Generation and analysis of toxic gases in fire — Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19703:2010 - **Withdrawn / published date:** 2005-05-27 _(verified: appears in the quote below)_ > 33864,IS,,ISO 19703:2005,"Generation and analysis of toxic gases in fire — Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires","Production et analyse des gaz toxiques dans le feu — Calcul des taux de production des espèces, des rapports d'équivalence et de l'efficacité de la combustion dans les feux expérimentaux",2005-05-27,1,['13.220.01'],ISO/TC 92/SC 3,9599,,[51335],"['en','fr','ru']",34,"ISO 19703:2005 provides definitions and equations for the calculation of toxic product yields and the fire conditions under which they have been derived in terms of equivalence ratio and combustion efficiency. Sample calculations for practical cases are p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19703:2010 - **Identifier:** ISO 19703:2010 _(verified: appears in the quote below)_ - **Item title:** Generation and analysis of toxic gases in fire — Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19703:2018 - **Withdrawn / published date:** 2010-06-07 _(verified: appears in the quote below)_ > 51335,IS,,ISO 19703:2010,"Generation and analysis of toxic gases in fire — Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires","Production et analyse des gaz toxiques dans le feu — Calcul des taux de production des espèces, des rapports d'équivalence et de l'efficacité de combustion dans les feux expérimentaux",2010-06-07,2,['13.220.01'],ISO/TC 92/SC 3,9599,[33864],[70652],"['en','fr']",35,
ISO 19703:2010 provides definitions and equations for the calculation of toxic product yields and the fire conditions under which they have been derived in terms of equivalence ratio and combustion efficiency. Sample calculations for practical cases are pro Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19706:2007 - **Identifier:** ISO 19706:2007 _(verified: appears in the quote below)_ - **Item title:** Guidelines for assessing the fire threat to people _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19706:2011 - **Withdrawn / published date:** 2007-01-16 _(verified: appears in the quote below)_ > 43050,IS,,ISO 19706:2007,Guidelines for assessing the fire threat to people,Lignes directrices pour l'évaluation des dangers du feu pour les personnes,2007-01-16,1,['13.220.01'],ISO/TC 92/SC 3,9599,[33867],[56864],"['en','ru']",12,"
ISO 19706:2006 is intended to serve as general guidelines for the assessment of the fire threat to people. It encompasses the development, evaluation and use of relevant quantitative information for use in fire hazard and risk assessment. This information, generally obtained from fire-incidence investigation, fire statistics, real-scale fire tests and from physical fire models, is intended to be used in conjunction with computational models for analysis of the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19712-3:2007 - **Identifier:** ISO 19712-3:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19712-3:2022 - **Withdrawn / published date:** 2007-12-04 _(verified: appears in the quote below)_ > 41512,IS,,ISO 19712-3:2007,Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes,Plastiques — Matériaux décoratifs massifs de revêtement de surface — Partie 3: Détermination des propriétés — Produits mis en forme,2007-12-04,1,['83.140.20'],ISO/TC 61/SC 11,9599,,[82765],"['en','fr','ru']",39,
ISO 19712-3:2007 specifies the methods of test for determination of the properties of solid surfacing materials in the form of shaped products. These methods are primarily intended for testing the materials specified in ISO 19712‑1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19723-1:2018 - **Identifier:** ISO 19723-1:2018 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 1: Safety requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19723-1:2025 - **Withdrawn / published date:** 2018-07-17 _(verified: appears in the quote below)_ > 66120,IS,,ISO 19723-1:2018,Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 1: Safety requirements,Véhicules routiers — Systèmes à carburant gaz naturel liquéfié (GNL) — Partie 1: Exigences de sécurité,2018-07-17,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[86568],['en'],13,"This document specifies the minimum safety requirements applicable to liquefied natural gas (LNG) on-board fuel system intended for use on the types of motor vehicles defined in ISO 3833.
This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using liquefied natural gas in accordance with the ISO 15403 series. It is not applicable to original-production and converted vehi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19723-1:2018/Amd 1:2021 - **Identifier:** ISO 19723-1:2018/Amd 1:2021 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 1: Safety requirements — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19723-1:2025 - **Withdrawn / published date:** 2021-01-04 _(verified: appears in the quote below)_ > 77231,IS,Amd,ISO 19723-1:2018/Amd 1:2021,Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 1: Safety requirements — Amendment 1,Véhicules routiers — Systèmes à carburant gaz naturel liquéfié (GNL) — Partie 1: Exigences de sécurité — Amendement 1,2021-01-04,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[86568],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19723-2:2018 - **Identifier:** ISO 19723-2:2018 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 2: Test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19723-2:2025 - **Withdrawn / published date:** 2018-07-17 _(verified: appears in the quote below)_ > 66121,IS,,ISO 19723-2:2018,Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 2: Test methods,Véhicules routiers — Systèmes à carburant gaz naturel liquéfié (GNL) — Partie 2: Méthodes de test,2018-07-17,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[86655],['en'],11,"
This document specifies performance and general test methods for liquefied natural gas fuel system components intended for use on the types of motor vehicles defined in ISO 3833.
This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using liquefied gas in accordance with the ISO 15403 series. It is not applicable to the following: original-production and converted vehicles.
Th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19724:2016 - **Identifier:** ISO 19724:2016 _(verified: appears in the quote below)_ - **Item title:** Gasoline engines with direct injection — Cleanliness assessment of fuel injection equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19724:2020 - **Withdrawn / published date:** 2016-11-21 _(verified: appears in the quote below)_ > 66122,IS,,ISO 19724:2016,Gasoline engines with direct injection — Cleanliness assessment of fuel injection equipment,Moteurs à essence — Evaluation de propreté pour équipement d'injection de combustible,2016-11-21,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[77440],['en'],5,"
ISO 19724:2016 specifies cleanliness assessment procedures for evaluating the amount of debris present on the clean side of the constituent parts of high pressure gasoline direct fuel injection systems. The presence of such debris could lead to a reduction in the system's operational performance.
While other International Standards (e.g. ISO 16232 series) relate to the cleanliness of different types of components used Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1973:1976 - **Identifier:** ISO 1973:1976 _(verified: appears in the quote below)_ - **Item title:** Textiles — Determination of linear density of fibres — Gravimetric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1973:1995 - **Withdrawn / published date:** 1976-10-01 _(verified: appears in the quote below)_ > 6702,IS,,ISO 1973:1976,Textiles — Determination of linear density of fibres — Gravimetric method,Fibres textiles — Détermination de la masse linéique — Méthode gravimétrique,1976-10-01,1,['59.060'],ISO/TC 38,9599,,[6703],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1973:1995 - **Identifier:** ISO 1973:1995 _(verified: appears in the quote below)_ - **Item title:** Textile fibres — Determination of linear density — Gravimetric method and vibroscope method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1973:2021 - **Withdrawn / published date:** 1995-10-26 _(verified: appears in the quote below)_ > 6703,IS,,ISO 1973:1995,Textile fibres — Determination of linear density — Gravimetric method and vibroscope method,Fibres textiles — Détermination de la masse linéique — Méthode gravimétrique et méthode au vibroscope,1995-10-26,2,['59.060.01'],ISO/TC 38/SC 23,9599,[6702],[80023],"['en','fr']",8,"
Specifies a gravimetric method and a vibroscope method for the determination of the linear density of textile fibres applicable to bundles of fibres and individual fibres. The procedures can be applied only to fibres which can be kept straight and, in case of bundles, parallel, during test preparation. These methods are properly applicable when the fibres are readily free of crimp. They are not ap Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1974:1985 - **Identifier:** ISO 1974:1985 _(verified: appears in the quote below)_ - **Item title:** Paper — Determination of tearing resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1974:1990 - **Withdrawn / published date:** 1985-10-17 _(verified: appears in the quote below)_ > 6704,IS,,ISO 1974:1985,Paper — Determination of tearing resistance,Papier — Détermination de la résistance au déchirement,1985-10-17,2,['85.060'],ISO/TC 6/SC 2,9599,,[6705],"['en','fr']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1974:1990 - **Identifier:** ISO 1974:1990 _(verified: appears in the quote below)_ - **Item title:** Paper — Determination of tearing resistance (Elmendorf method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1974:2012 - **Withdrawn / published date:** 1990-02-08 _(verified: appears in the quote below)_ > 6705,IS,,ISO 1974:1990,Paper — Determination of tearing resistance (Elmendorf method),Papier — Détermination de la résistance au déchirement (Méthode Elmendorf),1990-02-08,3,['85.060'],ISO/TC 6/SC 2,9599,[6704],[52430],"['en','fr']",8,"
It can also be used for light boards if the tearing resistance is within the range of the instrument, does not apply to corrugated fibreboard and is not suitable for determining the cross-direction tearing resistance of highly directional paper or board.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19741:2018 - **Identifier:** ISO 19741:2018 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Optical materials and components — Test method for striae in infrared optical materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19741:2025 - **Withdrawn / published date:** 2018-05-08 _(verified: appears in the quote below)_ > 67625,IS,,ISO 19741:2018,Optics and photonics — Optical materials and components — Test method for striae in infrared optical materials,Optique et photonique — Matériaux et composants optiques — Méthodes d’essai pour déterminer les stries des matériaux optiques infrarouges,2018-05-08,1,['37.020'],ISO/TC 172/SC 3,9599,,[88733],['en'],7,"This document specifies the principle, apparatus, condition, sample, procedure and data processing of measuring striae in infrared optical materials.
It is applicable to the determination of striae in infrared optical materials, such as infrared optical glass, which is opaque to visible wavelengths and whose transmission optical spectra are beyond 0,7 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19743:2017 - **Identifier:** ISO 19743:2017 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Determination of content of heavy extraneous materials larger than 3,15 mm _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19743:2026 - **Withdrawn / published date:** 2017-04-21 _(verified: appears in the quote below)_ > 66203,IS,,ISO 19743:2017,"Solid biofuels — Determination of content of heavy extraneous materials larger than 3,15 mm","Biocombustibles solides — Détermination de la teneur en matériaux lourds exogènes de dimension supérieure à 3,15 mm",2017-04-21,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[90720],"['en','fr']",5,"
ISO 19743:2017 specifies a method for the determination of content of heavy extraneous materials larger than 3,15 mm by the use of sink-and-float separation combined with elutriation. This document is applicable to woody biomass in accordance with ISO 17225‑1:2014, Table 1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1977-1:1976 - **Identifier:** ISO 1977-1:1976 _(verified: appears in the quote below)_ - **Item title:** Conveyor chains, attachments and chain wheels — Part 1: Chains — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1977:2000 - **Withdrawn / published date:** 1976-11-01 _(verified: appears in the quote below)_ > 6708,IS,,ISO 1977-1:1976,"Conveyor chains, attachments and chain wheels — Part 1: Chains — Metric series","Chaînes convoyeurs, plaques d'attache et roues pour chaînes — Partie 1: Chaînes — Série métrique",1976-11-01,1,['53.040.20'],ISO/TC 100,9599,,[25831],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1977-2:1974 - **Identifier:** ISO 1977-2:1974 _(verified: appears in the quote below)_ - **Item title:** Conveyor chains, attachments and chain wheels — Part 2: Chain wheels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1977:2000 | ISO/CD 1977-2 - **Withdrawn / published date:** 1974-07-01 _(verified: appears in the quote below)_ > 6709,IS,,ISO 1977-2:1974,"Conveyor chains, attachments and chain wheels — Part 2: Chain wheels","Chaînes convoyeurs, plaques d'attache et roues pour chaînes — Partie 2: Roues pour chaînes",1974-07-01,1,['53.040.20'],ISO/TC 100,9599,,"[25831,25832]","['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1977:2000 - **Identifier:** ISO 1977:2000 _(verified: appears in the quote below)_ - **Item title:** Conveyor chains, attachments and sprockets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1977:2006 - **Withdrawn / published date:** 2000-11-09 _(verified: appears in the quote below)_ > 25831,IS,,ISO 1977:2000,"Conveyor chains, attachments and sprockets","Chaînes de manutention, plaques-attaches et roues dentées",2000-11-09,1,['53.040.20'],ISO/TC 100,9599,"[6708,6709,6710]",[43971],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1977-3:1974 - **Identifier:** ISO 1977-3:1974 _(verified: appears in the quote below)_ - **Item title:** Conveyor chains, attachments and chain wheels — Part 3: Attachments — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 1977-3 | ISO 1977:2000 - **Withdrawn / published date:** 1974-07-01 _(verified: appears in the quote below)_ > 6710,IS,,ISO 1977-3:1974,"Conveyor chains, attachments and chain wheels — Part 3: Attachments — Metric series","Chaînes convoyeurs, plaques d'attache et roues pour chaînes — Partie 3: Plaques d'attache — Série métrique",1974-07-01,1,['53.040.20'],ISO/TC 100,9599,,"[25833,25831]","['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19810:2017 - **Identifier:** ISO 19810:2017 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment — Measurement of water contact angle _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19810:2023 - **Withdrawn / published date:** 2017-04-10 _(verified: appears in the quote below)_ > 66243,IS,,ISO 19810:2017,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment — Measurement of water contact angle",Céramiques techniques — Méthode d'essai relative aux propriétés autonettoyantes des matériaux photocatalytiques semiconducteurs dans un environnement d'éclairage intérieur — Mesurage de l'angle de contact de l'eau,2017-04-10,1,['81.060.30'],ISO/TC 206,9599,,[86681],['en'],12,"ISO 19810:2017 specifies a test method for the determination of the self-cleaning performance of sheet-form materials that contain an indoor-light-active photocatalyst or h Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19819:2004 - **Identifier:** ISO 19819:2004 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Tensile testing in liquid helium _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6892-4:2015 - **Withdrawn / published date:** 2004-08-11 _(verified: appears in the quote below)_ > 33965,IS,,ISO 19819:2004,Metallic materials — Tensile testing in liquid helium,Matériaux métalliques — Essai de traction dans l'hélium liquide,2004-08-11,1,['77.040.10'],ISO/TC 164/SC 1,9599,,[51516],"['en','fr']",12,"
ISO 19819:2004 specifies the method of tensile testing of metallic materials in liquid helium (boiling point at - 269 °C or 4,2 K) and defines the mechanical properties that can be determined.
ISO 19819:2004 may also apply to tensile testing at cryogenic temperatures (less than - 196 °C or 77 K), which requires special apparatus, smaller specimens, and concern for serrated yielding, adiabatic heating and strain-rate effects.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19828:2017 - **Identifier:** ISO 19828:2017 _(verified: appears in the quote below)_ - **Item title:** Welding for aerospace applications — Visual inspection of welds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19828:2025 - **Withdrawn / published date:** 2017-04-27 _(verified: appears in the quote below)_ > 69101,IS,,ISO 19828:2017,Welding for aerospace applications — Visual inspection of welds,Soudage pour applications aérospatiales — Contrôle visuel des soudures,2017-04-27,1,['25.160.01'],ISO/TC 44/SC 14,9599,,[89175],"['en','fr']",14,"ISO 19828:2017 specifies the requirements for visual inspection of welds in metallic materials and requirements for qualification and certification of personnel for visual weld inspection.
ISO 19828:2017 is also applicable to the visual inspection of the joint prior to or between welding sequences, and of brazed joints. In this case, the contents of theoretical and practical training will need to be adapted accordingly.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1984-0:1984 - **Identifier:** ISO 1984-0:1984 _(verified: appears in the quote below)_ - **Item title:** Test conditions for milling machines with table of fixed height, with horizontal or vertical spindle — Part 0: General introduction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1984-1:2001 | ISO 1984-2:2001 - **Withdrawn / published date:** 1984-05-01 _(verified: appears in the quote below)_ > 6717,IS,,ISO 1984-0:1984,"Test conditions for milling machines with table of fixed height, with horizontal or vertical spindle — Part 0: General introduction","Conditions de réception des machines à fraiser à table à hauteur fixe, à broche horizontale ou verticale — Partie 0: Introduction générale",1984-05-01,1,['25.080.20'],ISO/TC 39/SC 2,9599,,"[33507,33508]","['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1984:1982 - **Identifier:** ISO 1984:1982 _(verified: appears in the quote below)_ - **Item title:** Acceptance conditions for milling machines with table of fixed height with horizontal or vertical spindle — Testing of accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1984-1:2001 | ISO 1984-2:2001 - **Withdrawn / published date:** 1982-02-01 _(verified: appears in the quote below)_ > 6716,IS,,ISO 1984:1982,Acceptance conditions for milling machines with table of fixed height with horizontal or vertical spindle — Testing of accuracy,"Conditions de réception des machines à fraiser à table de hauteur fixe, à broche horizontale ou verticale — Contrôle de la précision",1982-02-01,2,['25.080.20'],ISO/TC 39/SC 2,9599,,"[33507,33508]","['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19840:2004 - **Identifier:** ISO 19840:2004 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19840:2012 - **Withdrawn / published date:** 2004-11-03 _(verified: appears in the quote below)_ > 33971,IS,,ISO 19840:2004,"Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces",Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Mesure et critères d'acceptation de l'épaisseur d'un feuil sec sur des surfaces rugueuses,2004-11-03,1,['87.020'],ISO/TC 35/SC 14,9599,,[59523],"['en','fr','ru']",15,"ISO 19840:2004 specifies a procedure for the verification of dry film thickness against the nominal dry film thickness on rough surfaces, including the adjustment of the instruments used, the definition of inspection areas, sampling Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19847:2018 - **Identifier:** ISO 19847:2018 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Shipboard data servers to share field data at sea _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19847:2024 - **Withdrawn / published date:** 2018-10-05 _(verified: appears in the quote below)_ > 66405,IS,,ISO 19847:2018,Ships and marine technology — Shipboard data servers to share field data at sea,Navires et technologie maritime — Serveurs de données embarqués pour partager les données de terrain en mer,2018-10-05,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[78260],['en'],53,
This document specifies requirements for the shipboard data server that is used to collect data from other shipboard machinery and systems and to further share the collected data in a safe and efficient manner.
This document specifies communication protocols with reference to the data structure of ISO 19848.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19848:2018 - **Identifier:** ISO 19848:2018 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Standard data for shipboard machinery and equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19848:2024 - **Withdrawn / published date:** 2018-10-05 _(verified: appears in the quote below)_ > 66406,IS,,ISO 19848:2018,Ships and marine technology — Standard data for shipboard machinery and equipment,Navires et technologie maritime — Données normalisées pour les machines et équipements à bord des navires,2018-10-05,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[78262],['en'],57,"This document applies to the structure of the ship and to shipboard machinery and equipment, and is intended for implementers of software used for the capture and processing of sensor data from the objects mentioned above.
For those purposes, this document describes the way to name the sensor, required data item, and the way to describe the data above.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1985:1974 - **Identifier:** ISO 1985:1974 _(verified: appears in the quote below)_ - **Item title:** Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1985:1985 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 6718,IS,,ISO 1985:1974,Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy,"Conditions d'essais des machines à rectifier les surfaces planes, à broche porte-meule à axe vertical — Contrôle de la précision",1974-11-01,1,['25.080.50'],ISO/TC 39,9599,,[6719],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1985:1985 - **Identifier:** ISO 1985:1985 _(verified: appears in the quote below)_ - **Item title:** Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1985:1998 - **Withdrawn / published date:** 1985-06-20 _(verified: appears in the quote below)_ > 6719,IS,,ISO 1985:1985,Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy,"Conditions de réception des machines à rectifier les surfaces planes, à broche porte-meule à axe vertical — Contrôle de la précision",1985-06-20,2,['25.080.50'],ISO/TC 39/SC 2,9599,[6718],[22727],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1985:1998 - **Identifier:** ISO 1985:1998 _(verified: appears in the quote below)_ - **Item title:** Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1985:2015 - **Withdrawn / published date:** 1998-02-19 _(verified: appears in the quote below)_ > 22727,IS,,ISO 1985:1998,Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy,"Machines-outils — Conditions d'essai des machines à rectifier les surfaces planes, à broche porte-meule à axe vertical — Contrôle de la précision",1998-02-19,3,['25.080.50'],ISO/TC 39/SC 2,9599,[6719],[55019],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1986-1:2001 - **Identifier:** ISO 1986-1:2001 _(verified: appears in the quote below)_ - **Item title:** Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy — Part 1: Machines with a table length of up to 1 600 mm _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1986-1:2014 - **Withdrawn / published date:** 2001-11-15 _(verified: appears in the quote below)_ > 27641,IS,,ISO 1986-1:2001,Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy — Part 1: Machines with a table length of up to 1 600 mm,"Conditions d'essai des machines à rectifier les surfaces planes, à broche porte-meules à axe horizontal — Contrôle de la précision — Partie 1: Machines avec une table jusqu'à 1 600 mm de long",2001-11-15,1,['25.080.50'],ISO/TC 39/SC 2,9599,[6721],[64504],"['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1986:1974 - **Identifier:** ISO 1986:1974 _(verified: appears in the quote below)_ - **Item title:** Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1986:1985 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 6720,IS,,ISO 1986:1974,Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy,"Conditions d'essais des machines à rectifier les surfaces planes, à broche porte-meule à axe horizontal — Contrôle de la précision",1974-11-01,1,['25.080.50'],ISO/TC 39,9599,,[6721],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1986:1985 - **Identifier:** ISO 1986:1985 _(verified: appears in the quote below)_ - **Item title:** Acceptance conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1986-1:2001 - **Withdrawn / published date:** 1985-06-20 _(verified: appears in the quote below)_ > 6721,IS,,ISO 1986:1985,Acceptance conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy,"Conditions de réception des machines à rectifier les surfaces planes, à broche porte-meule à axe horizontal — Contrôle de la précision",1985-06-20,2,['25.080.50'],ISO/TC 39/SC 2,9599,[6720],[27641],"['en','fr']",11,"This second edition cancels and replaces the first edition (ISO 1986 : 1974). Describes both geometrical and practical tests on these general purpose and normal accuracy surface grinding machines, and the corresponding permissible deviations which apply. Deals only apply to the testing of the running of the machine (vi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19879:2005 - **Identifier:** ISO 19879:2005 _(verified: appears in the quote below)_ - **Item title:** Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19879:2010 - **Withdrawn / published date:** 2005-08-22 _(verified: appears in the quote below)_ > 33978,IS,,ISO 19879:2005,Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections,Raccords de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Méthodes d'essai pour raccords pour transmissions hydrauliques,2005-08-22,1,"['23.100.40','23.040.60']",ISO/TC 131/SC 4,9599,[20505],[55915],"['en','fr']",20,"
ISO 19879:2005 specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power applications. This International Standard does not apply to the testing of hydraulic quick-action coupling Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19879:2005/Cor 1:2007 - **Identifier:** ISO 19879:2005/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19879:2010 - **Withdrawn / published date:** 2007-01-29 _(verified: appears in the quote below)_ > 45539,IS,Cor,ISO 19879:2005/Cor 1:2007,Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections — Technical Corrigendum 1,Raccords de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Méthodes d'essai pour raccords pour transmissions hydrauliques — Rectificatif technique 1,2007-01-29,1,"['23.100.40','23.040.60']",ISO/TC 131/SC 4,9599,,[55915],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19879:2010 - **Identifier:** ISO 19879:2010 _(verified: appears in the quote below)_ - **Item title:** Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19879:2021 - **Withdrawn / published date:** 2010-09-03 _(verified: appears in the quote below)_ > 55915,IS,,ISO 19879:2010,Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections,Raccords de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Méthodes d'essai pour raccords pour transmissions hydrauliques,2010-09-03,2,"['23.100.40','23.040.60']",ISO/TC 131/SC 4,9599,"[45539,33978]",[71180],"['en','fr']",20,"
ISO 19879:2010 specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power applications. ISO 19879:2010 does not apply to the testing of hydraulic quick-action couplings, wh Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1988:1975 - **Identifier:** ISO 1988:1975 _(verified: appears in the quote below)_ - **Item title:** Hard coal — Sampling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 18283:2006 - **Withdrawn / published date:** 1975-03-01 _(verified: appears in the quote below)_ > 6722,IS,,ISO 1988:1975,Hard coal — Sampling,Charbons et lignites durs — Échantillonnage,1975-03-01,1,['73.040'],ISO/TC 27/SC 4,9599,,[31776],"['en','fr']",90,"
Forms a comprehensive document dealing with allaspects of the sampling of coal. It specifies methods of sampling hard coal, for both routine and special purposes, to provide samples for general analysis and for the determination of total moisture. It also outlines the principles to be taken into consideration when taking the sample and preparing it for analysis.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19880-5:2019 - **Identifier:** ISO 19880-5:2019 _(verified: appears in the quote below)_ - **Item title:** Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 19880-5 | ISO 19880-5:2025 - **Withdrawn / published date:** 2019-11-18 _(verified: appears in the quote below)_ > 73787,IS,,ISO 19880-5:2019,Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies,Carburant d'hydrogène gazeux — Stations-service — Partie 5: Flexibles et assemblages flexibles pour distributeurs,2019-11-18,1,"['43.060.40','71.100.20']",ISO/TC 197,9599,,"[82504,87684]",['en'],27,"This document specifies the requirements for wire or textile reinforced hoses and hose assemblies suitable for dispensing hydrogen up to 70 MPa nominal working pressure, in the operating temperature range of −40 °C to 65 °C.
This document contains safety requirements for material, design, manufacture and testing of gaseous hydrogen hose and hose assemblies for hydrogen fuelling s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19880-8:2019 - **Identifier:** ISO 19880-8:2019 _(verified: appears in the quote below)_ - **Item title:** Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19880-8:2024 - **Withdrawn / published date:** 2019-10-22 _(verified: appears in the quote below)_ > 69540,IS,,ISO 19880-8:2019,Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control,Hydrogène gazeux — Stations de remplissage — Partie 8: Contrôle qualité du carburant,2019-10-22,1,"['43.060.40','71.100.20']",ISO/TC 197,9599,,[83949],['en'],39,
This document specifies the protocol for ensuring the quality of the gaseous hydrogen at hydrogen distribution facilities and hydrogen fuelling stations for proton exchange membrane (PEM) fuel cells for road vehicles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19880-8:2019/Amd 1:2021 - **Identifier:** ISO 19880-8:2019/Amd 1:2021 _(verified: appears in the quote below)_ - **Item title:** Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control — Amendment 1: Alignment with Grade D of ISO 14687 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19880-8:2024 - **Withdrawn / published date:** 2021-08-10 _(verified: appears in the quote below)_ > 80272,IS,Amd,ISO 19880-8:2019/Amd 1:2021,Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control — Amendment 1: Alignment with Grade D of ISO 14687,Hydrogène gazeux — Stations de remplissage — Partie 8: Contrôle qualité du carburant — Amendement 1: Alignement avec le Grade D de l'ISO 14687,2021-08-10,1,"['43.060.40','71.100.20']",ISO/TC 197,9599,,[83949],['en'],14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19881:2018 - **Identifier:** ISO 19881:2018 _(verified: appears in the quote below)_ - **Item title:** Gaseous hydrogen — Land vehicle fuel containers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19881:2025 - **Withdrawn / published date:** 2018-10-18 _(verified: appears in the quote below)_ > 65029,IS,,ISO 19881:2018,Gaseous hydrogen — Land vehicle fuel containers,Hydrogène gazeux — Réservoirs de carburant pour véhicules terrestres,2018-10-18,1,"['43.060.40','71.100.20']",ISO/TC 197,9599,,[82595],['en'],53,"This document contains requirements for the material, design, manufacture, marking and testing of serially produced, refillable containers intended only for the storage of compressed hydrogen gas for land vehicle operation. These containers
a) are permanently attached to the vehicle,
b) have a capacity of up to 1 000 l water capacity, and
c) have a nominal working pressure that does not exceed 70 MPa.
The scope of this document is limited to Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19882:2018 - **Identifier:** ISO 19882:2018 _(verified: appears in the quote below)_ - **Item title:** Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19882:2025 - **Withdrawn / published date:** 2018-11-28 _(verified: appears in the quote below)_ > 64655,IS,,ISO 19882:2018,Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers,Hydrogène gazeux — Dispositifs limiteurs de pression thermiquement activés pour les conteneurs de carburant de véhicules à hydrogène comprimé,2018-11-28,1,"['27.075','43.060.40']",ISO/TC 197,9599,,[82596],['en'],28,"
This document establishes minimum requirements for pressure relief devices intended for use on hydrogen fuelled vehicle fuel containers that comply with ISO 19881, IEC 62282-4-101, ANSI HGV 2, CSA B51 Part 2, EC79/EU406, SAE J2579, or the UN GTR No. 13.
The scope of this document is limited to thermally activated pressure relief devices Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1989:1978 - **Identifier:** ISO 1989:1978 _(verified: appears in the quote below)_ - **Item title:** Programming languages — COBOL _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1989:1985 - **Withdrawn / published date:** 1978-02-01 _(verified: appears in the quote below)_ > 6723,IS,,ISO 1989:1978,Programming languages — COBOL,Langages de programmation — COBOL,1978-02-01,1,['35.060'],ISO/IEC JTC 1,9599,,[6724],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1989:1985 - **Identifier:** ISO 1989:1985 _(verified: appears in the quote below)_ - **Item title:** Programming languages — COBOL _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 1989:2002 - **Withdrawn / published date:** 1985-12-19 _(verified: appears in the quote below)_ > 6724,IS,,ISO 1989:1985,Programming languages — COBOL,Langages de programmation — COBOL,1985-12-19,2,['35.060'],ISO/IEC JTC 1/SC 22,9599,[6723],[28805],['en'],1,
ANSI standard is adopted as International Standard 1989-1985 for the COBOL programming language. This second edition cancels and replaces the first edition (ISO 1989-1978).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1989:1985/Amd 1:1992 - **Identifier:** ISO 1989:1985/Amd 1:1992 _(verified: appears in the quote below)_ - **Item title:** Programming languages — COBOL — Amendment 1: Intrinsic function module _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 1989:2002 - **Withdrawn / published date:** 1992-11-19 _(verified: appears in the quote below)_ > 6725,IS,Amd,ISO 1989:1985/Amd 1:1992,Programming languages — COBOL — Amendment 1: Intrinsic function module,Langages de programmation — COBOL — Amendement 1: Module de fonction intrinsèque,1992-11-19,2,['35.060'],ISO/IEC JTC 1/SC 22,9599,,[28805],['en'],1,"Adopts the following national standard: ANSI X3.23a-1989, supplement to ANSI X3.23-1985.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1989:1985/Amd 2:1994 - **Identifier:** ISO 1989:1985/Amd 2:1994 _(verified: appears in the quote below)_ - **Item title:** Programming languages — COBOL — Amendment 2: Correction and clarification amendment for COBOL _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 1989:2002 - **Withdrawn / published date:** 1994-10-27 _(verified: appears in the quote below)_ > 21818,IS,Amd,ISO 1989:1985/Amd 2:1994,Programming languages — COBOL — Amendment 2: Correction and clarification amendment for COBOL,Langages de programmation — COBOL — Amendement 2: Amendement de correction et de clarification pour le COBOL,1994-10-27,2,['35.060'],ISO/IEC JTC 1/SC 22,9599,,[28805],['en'],1,"Adopted as amendment 2 to ISO 1989:1985: ANSI X3.23b-1993, supplement to ANSI X3.23-1985.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 199:1979 - **Identifier:** ISO 199:1979 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Thrust ball bearings — Tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 199:1997 - **Withdrawn / published date:** 1979-10-01 _(verified: appears in the quote below)_ > 4062,IS,,ISO 199:1979,Rolling bearings — Thrust ball bearings — Tolerances,Roulements — Butées à billes — Tolérances,1979-10-01,1,['21.100.20'],ISO/TC 4/SC 4,9599,"[4063,4064]",[26791],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 199:1997 - **Identifier:** ISO 199:1997 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Thrust bearings — Tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 199:2005 - **Withdrawn / published date:** 1997-11-20 _(verified: appears in the quote below)_ > 26791,IS,,ISO 199:1997,Rolling bearings — Thrust bearings — Tolerances,Roulements — Butées — Tolérances,1997-11-20,2,['21.100.20'],ISO/TC 4/SC 4,9599,[4062],[37628],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 199:2005 - **Identifier:** ISO 199:2005 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Thrust bearings — Tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 199:2014 - **Withdrawn / published date:** 2005-10-03 _(verified: appears in the quote below)_ > 37628,IS,,ISO 199:2005,Rolling bearings — Thrust bearings — Tolerances,Roulements — Butées — Tolérances,2005-10-03,3,['21.100.20'],ISO/TC 4/SC 4,9599,[26791],[61288],"['en','fr']",10,"ISO 199:2005 specifies tolerances for boundary dimensions (except chamfer dimensions) and for the running accuracy of thrust rolling bearings with flat back faces as specified in ISO 104. It is not applicable to certain thrust bearings, e.g. thrust needle roller bearings, or for particular fields of application, e.g. thrust special precision bearings. Chamfer dimension limits are given in ISO 582.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 199:2014 - **Identifier:** ISO 199:2014 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 199:2023 - **Withdrawn / published date:** 2014-07-21 _(verified: appears in the quote below)_ > 61288,IS,,ISO 199:2014,Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values,Roulements — Butées — Spécification géométrique des produits (GPS) et valeurs de tolérance,2014-07-21,4,['21.100.20'],ISO/TC 4/SC 4,9599,[37628],[81447],"['en','fr','ru']",33,"ISO 199:2014 specifies dimensional characteristics, limit deviations from nominal values, and tolerance values to define the interface (except chamfers) of thrust rolling bearings. Nominal boundary dimensions are defined in ISO 104.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19900:2002 - **Identifier:** ISO 19900:2002 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — General requirements for offshore structures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19900:2013 - **Withdrawn / published date:** 2002-11-22 _(verified: appears in the quote below)_ > 33684,IS,,ISO 19900:2002,Petroleum and natural gas industries — General requirements for offshore structures,Industries du pétrole et du gaz naturel — Exigences générales pour les structures en mer,2002-11-22,1,['75.180.10'],ISO/TC 67/SC 7,9599,[22992],[59877],"['en','fr','ru']",28,"ISO 19900:2002 specifies general principles for the design and assessment of structures subjected to known or foreseeable types of actions. These general principles are applicable worldwide to all types of offshore structures including bottom-founded structures as well as floating structures and to all types of materials used including steel, concrete and aluminium.
ISO 19900:2002 specifies design princi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19900:2013 - **Identifier:** ISO 19900:2013 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — General requirements for offshore structures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19900:2019 - **Withdrawn / published date:** 2013-12-06 _(verified: appears in the quote below)_ > 59877,IS,,ISO 19900:2013,Petroleum and natural gas industries — General requirements for offshore structures,Industries du pétrole et du gaz naturel — Exigences générales pour les structures en mer,2013-12-06,2,['75.180.10'],ISO/TC 67/SC 7,9599,[33684],[69761],"['en','fr']",47,"
ISO 19900:2013 specifies general principles for the design and assessment of offshore structures subjected to known or foreseeable types of actions. These general principles are applicable worldwide to all types of offshore structures, including, bottom-founded structures as well as floating structures, and to all types of materials used including steel, concrete and aluminium.
ISO 19900:2013 specifies design Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-1:2005 - **Identifier:** ISO 19901-1:2005 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 1: Metocean design and operating considerations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-1:2015 - **Withdrawn / published date:** 2005-11-16 _(verified: appears in the quote below)_ > 34586,IS,,ISO 19901-1:2005,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 1: Metocean design and operating considerations,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 1: Dispositions océano-météorologiques pour la conception et l'exploitation,2005-11-16,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[60183],['en'],135,"
ISO 19901-1:2005 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-2:2004 - **Identifier:** ISO 19901-2:2004 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-2:2017 - **Withdrawn / published date:** 2004-11-18 _(verified: appears in the quote below)_ > 34587,IS,,ISO 19901-2:2004,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 2: Procédures de conception et critères sismiques,2004-11-18,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[61142],['en'],46,"ISO 19901-2:2004 contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included. The requirements are applicable to fixed steel structures and fixed concrete structures. The effects of seismic events on floating structures and partia Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-2:2017 - **Identifier:** ISO 19901-2:2017 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-2:2022 - **Withdrawn / published date:** 2017-11-15 _(verified: appears in the quote below)_ > 61142,IS,,ISO 19901-2:2017,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 2: Procédures de conception et critères sismiques,2017-11-15,2,['75.180.10'],ISO/TC 67/SC 7,9599,[34587],[77217],"['en','fr']",53,"
ISO 19901-2:2017 contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included in Annex A. The requirements focus on fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-2:2022 - **Identifier:** ISO 19901-2:2022 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-2:2026 - **Withdrawn / published date:** 2022-06-22 _(verified: appears in the quote below)_ > 77217,IS,,ISO 19901-2:2022,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 2: Procédures de conception sismique et critères,2022-06-22,3,['75.180.10'],ISO/TC 67/SC 7,9599,[61142],[86741],"['en','fr']",55,"
This document contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included in Annex A. The requirements focus on fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events on Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-3:2010 - **Identifier:** ISO 19901-3:2010 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-3:2014 - **Withdrawn / published date:** 2010-12-10 _(verified: appears in the quote below)_ > 43812,IS,,ISO 19901-3:2010,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure,Industries du pétrole et du gaz naturel — Exigences spécifiques aux structures en mer — Partie 3: Superstructures,2010-12-10,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[65041],"['en','fr','ru']",116,"
ISO 19901-3:2010 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904‑1, ISO 19905‑1 and ISO 19906, which give requirements for various forms of support structure. Requirements in ISO 19901-3:2010 conc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-3:2014 - **Identifier:** ISO 19901-3:2014 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-3:2024 - **Withdrawn / published date:** 2014-12-03 _(verified: appears in the quote below)_ > 65041,IS,,ISO 19901-3:2014,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 3: Superstructures,2014-12-03,2,['75.180.10'],ISO/TC 67/SC 7,9599,[43812],[82677],"['en','fr','ru']",117,"
ISO 19901-3:2014 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904‑1, ISO 19905‑1 and ISO 19906, which give requirements for various forms of support structure. Requirements in this Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-4:2003 - **Identifier:** ISO 19901-4:2003 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-4:2016 - **Withdrawn / published date:** 2003-08-11 _(verified: appears in the quote below)_ > 34589,IS,,ISO 19901-4:2003,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 4: Bases conceptuelles des fondations,2003-08-11,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[61144],"['en','fr']",34,"
ISO 19901-4:2003 contains requirements and recommendations for those aspects of geoscience and foundation engineering that are applicable to a broad range of offshore structures, rather than to a particular structure type. Such aspects are site characterization, soil and rock characterization, and design an Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-4:2016 - **Identifier:** ISO 19901-4:2016 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-4:2025 - **Withdrawn / published date:** 2016-07-15 _(verified: appears in the quote below)_ > 61144,IS,,ISO 19901-4:2016,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 4: Bases conceptuelles des fondations,2016-07-15,2,['75.180.10'],ISO/TC 67/SC 7,9599,[34589],[79594],"['en','fr']",191,"
ISO 19901-4:2016 contains provisions for those aspects of geoscience and foundation engineering that are applicable to a broad range of offshore structures, rather than to a particular structure type. Such aspects are:
- site and soil characterization;
- identification of hazar Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-5:2003 - **Identifier:** ISO 19901-5:2003 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-5:2016 - **Withdrawn / published date:** 2003-07-31 _(verified: appears in the quote below)_ > 34590,IS,,ISO 19901-5:2003,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 5: Contrôle des poids durant la conception et la fabrication,2003-07-31,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[61537],"['en','fr']",50,"
ISO 19901-5:2003 specifies requirements for controlling the weight and centre of gravity (CoG) by means of mass management during the engineering and construction of structures for the offshore environment. The provisions are applicable to offshore projects that include structures of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-5:2016 - **Identifier:** ISO 19901-5:2016 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-5:2021 - **Withdrawn / published date:** 2016-02-15 _(verified: appears in the quote below)_ > 61537,IS,,ISO 19901-5:2016,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 5: Contrôle des poids durant la conception et la fabrication,2016-02-15,2,['75.180.10'],ISO/TC 67/SC 7,9599,[34590],[73039],"['en','fr']",75,"
ISO 19901:2016 specifies requirements for controlling the weight and centre of gravity (CoG) by means of mass management during the engineering and construction of structures for the offshore environment. The provisions are applicable to offshore projects that include structur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-7:2005 - **Identifier:** ISO 19901-7:2005 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-7:2013 - **Withdrawn / published date:** 2005-12-07 _(verified: appears in the quote below)_ > 39068,IS,,ISO 19901-7:2005,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 7: Systèmes de maintien en position des structures en mer flottantes et des unités mobiles en mer,2005-12-07,1,['75.180.10'],ISO/TC 67/SC 7,9599,[23798],[59298],['en'],117,"
ISO 19901-7:2005 specifies methodologies for a) the design, analysis and evaluation of stationkeeping systems for floating structures used by the oil and gas industries to support production, storage, drilling, well Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-7:2013 - **Identifier:** ISO 19901-7:2013 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-7:2026 - **Withdrawn / published date:** 2013-04-26 _(verified: appears in the quote below)_ > 59298,IS,,ISO 19901-7:2013,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 7: Systèmes de maintien en position des structures en mer flottantes et des unités mobiles en mer,2013-04-26,2,['75.180.10'],ISO/TC 67/SC 7,9599,[39068],[85482],"['en','fr']",184,"
ISO 19901-7:2013 specifies methodologies for
- the design, analysis and evaluation of stationkeeping systems for floating structures used by the oil and gas industries to support production, storage, d Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19901-8:2014 - **Identifier:** ISO 19901-8:2014 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19901-8:2023 - **Withdrawn / published date:** 2014-11-28 _(verified: appears in the quote below)_ > 61145,IS,,ISO 19901-8:2014,Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations,Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer — Partie 8: Investigations des sols en mer,2014-11-28,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[83302],"['en','fr']",139,"
ISO 19901-8:2014 specifies requirements, and provides recommendations and guidelines for marine soil investigations regarding:
a) objectives, planning and execution of marine soil investigations;
b) deployment of investigation equipment;
c) drilling and logging;
d) in situ testing;
e) Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19902:2007 - **Identifier:** ISO 19902:2007 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Fixed steel offshore structures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19902:2020 - **Withdrawn / published date:** 2007-11-26 _(verified: appears in the quote below)_ > 27507,IS,,ISO 19902:2007,Petroleum and natural gas industries — Fixed steel offshore structures,Industries du pétrole et du gaz naturel — Structures en mer fixes en acier,2007-11-26,1,['75.180.10'],ISO/TC 67/SC 7,9599,[22993],[65688],"['en','fr']",622,"
ISO 19902:2007 specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: caissons, free-standing and braced; jackets; monotowers; towers.
In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures ( Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19902:2007/Amd 1:2013 - **Identifier:** ISO 19902:2007/Amd 1:2013 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Fixed steel offshore structures — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19902:2020 - **Withdrawn / published date:** 2013-07-24 _(verified: appears in the quote below)_ > 61141,IS,Amd,ISO 19902:2007/Amd 1:2013,Petroleum and natural gas industries — Fixed steel offshore structures — Amendment 1,Industries du pétrole et du gaz naturel — Structures en mer fixes en acier — Amendement 1,2013-07-24,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[65688],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19903:2006 - **Identifier:** ISO 19903:2006 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Fixed concrete offshore structures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19903:2019 - **Withdrawn / published date:** 2006-11-29 _(verified: appears in the quote below)_ > 22994,IS,,ISO 19903:2006,Petroleum and natural gas industries — Fixed concrete offshore structures,Industries du pétrole et du gaz naturel — Structures en mer fixes en béton,2006-11-29,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[66910],"['en','fr']",119,"
ISO 19903:2006 specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum and natural gas industries, and specifically addresses the design, construction, transportation and installation of new structures, including requirements for in-service inspection and possible removal of structures, the assessment of structures in service, and the assessment of structures for reuse at other loca Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19904-1:2006 - **Identifier:** ISO 19904-1:2006 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Floating offshore structures — Part 1: Monohulls, semi-submersibles and spars _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19904-1:2019 - **Withdrawn / published date:** 2006-10-20 _(verified: appears in the quote below)_ > 22995,IS,,ISO 19904-1:2006,"Petroleum and natural gas industries — Floating offshore structures — Part 1: Monohulls, semi-submersibles and spars","Industries du pétrole et du gaz naturel — Structures en mer flottantes — Partie 1: Unités monocoques, unités semi-submersibles et unités spars",2006-10-20,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[63801],"['en','fr']",180,"
ISO 19904-1:2006 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support production, storage and/or offloading, drilling and production, production, storage and offloading, and drilling, production, storage and offloa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19905-1:2012 - **Identifier:** ISO 19905-1:2012 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19905-1:2016 - **Withdrawn / published date:** 2012-07-25 _(verified: appears in the quote below)_ > 34592,IS,,ISO 19905-1:2012,Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups,Industries du pétrole et du gaz naturel — Évaluation spécifique au site d'unités mobiles en mer — Partie 1: Plates-formes auto-élévatrices,2012-07-25,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[68135],['en'],309,"
ISO 19905-1:2012 specifies requirements and guidance for the site-specific assessment of independent leg jack‑up units for use in the petroleum and natural gas industries. It addresses
To ensure acceptable Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19905-1:2016 - **Identifier:** ISO 19905-1:2016 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19905-1:2023 - **Withdrawn / published date:** 2016-01-15 _(verified: appears in the quote below)_ > 68135,IS,,ISO 19905-1:2016,Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups,Industries du pétrole et du gaz naturel — Évaluation spécifique au site d'unités mobiles en mer — Partie 1: Plates-formes auto-élévatrices,2016-01-15,2,['75.180.10'],ISO/TC 67/SC 7,9599,[34592],[79590],"['en','fr']",320,"
ISO 19905-1:2016 specifies requirements and guidance for the site-specific assessment of independent leg jack‑up units for use in the petroleum and natural gas industries. It addresses:
To en Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19905-3:2017 - **Identifier:** ISO 19905-3:2017 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating unit _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19905-3:2021 - **Withdrawn / published date:** 2017-10-11 _(verified: appears in the quote below)_ > 61143,IS,,ISO 19905-3:2017,Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating unit,Industries du pétrole et du gaz naturel — Évaluation spécifique au site d'unités mobiles en mer — Partie 3: Unité flottante,2017-10-11,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[78910],"['en','fr']",21,"
ISO 19905-3 specifies requirements and gives guidance for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units.
ISO 19905-3 addresses mobile floating units that are mo Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 19906:2010 - **Identifier:** ISO 19906:2010 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Arctic offshore structures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19906:2019 - **Withdrawn / published date:** 2010-12-14 _(verified: appears in the quote below)_ > 33690,IS,,ISO 19906:2010,Petroleum and natural gas industries — Arctic offshore structures,Industries du pétrole et du gaz naturel — Structures arctiques en mer,2010-12-14,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[65477],"['en','fr']",465,"
ISO 19906:2010 specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and removal of offshore structures, related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in ISO 19906:2010 is deemed to include both the Arctic and other cold regions that are subject to similar sea ice, iceberg and icing conditions. The ob Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1991-2:1985 - **Identifier:** ISO 1991-2:1985 _(verified: appears in the quote below)_ - **Item title:** Vegetables — Nomenclature — Second list _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1991-2:1995 - **Withdrawn / published date:** 1985-08-22 _(verified: appears in the quote below)_ > 6729,IS,,ISO 1991-2:1985,Vegetables — Nomenclature — Second list,Légumes — Nomenclature — Deuxième liste,1985-08-22,1,"['67.080.20','01.040.67']",ISO/TC 34,9599,,[6730],"['en','fr','ru']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1992-1:1974 - **Identifier:** ISO 1992-1:1974 _(verified: appears in the quote below)_ - **Item title:** Commercial refrigerated cabinets — Methods of test — Part 1: Calculation of linear dimensions, areas and volumes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23953-1:2005 | ISO 23953-2:2005 - **Withdrawn / published date:** 1974-06-01 _(verified: appears in the quote below)_ > 6731,IS,,ISO 1992-1:1974,"Commercial refrigerated cabinets — Methods of test — Part 1: Calculation of linear dimensions, areas and volumes",Meubles frigorifiques commerciaux — Méthodes d'essai — Partie 1: Détermination des dimensions linéaires des surfaces et des volumes,1974-06-01,1,['97.130.20'],ISO/TC 86,9599,,"[37028,37029]","['en','fr']",1,"
Defines the terms and establishes the methods for determining linear dimensions, areas and volumes for commercial refrigerated cabinets intended for the sale and/or display of food products. - Replaces ISO recommendation R 1992-1971.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1992-4:1974 - **Identifier:** ISO 1992-4:1974 _(verified: appears in the quote below)_ - **Item title:** Commercial refrigerated cabinets — Methods of test — Part 4: Defrosting test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23953-1:2005 | ISO 23953-2:2005 - **Withdrawn / published date:** 1974-03-01 _(verified: appears in the quote below)_ > 6736,IS,,ISO 1992-4:1974,Commercial refrigerated cabinets — Methods of test — Part 4: Defrosting test,Meubles frigorifiques commerciaux — Méthodes d'essai — Partie 4: Essai de dégivrage,1974-03-01,1,['97.130.20'],ISO/TC 86,9599,,"[37028,37029]","['en','fr']",1,"Specifies the procedure to test package the defrosting method of commercial refrigerated cabinets intended or the sale and/or display of food products, when tested on the same conditions as established for the temperature test (see part 3 of ISO 1992). The test is not applicable to cabinets or parts thereof intended to be defrosted manually.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1992-5:1974 - **Identifier:** ISO 1992-5:1974 _(verified: appears in the quote below)_ - **Item title:** Commercial refrigerated cabinets — Methods of test — Part 5: Water vapour condensation test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23953-1:2005 | ISO 23953-2:2005 - **Withdrawn / published date:** 1974-04-01 _(verified: appears in the quote below)_ > 6737,IS,,ISO 1992-5:1974,Commercial refrigerated cabinets — Methods of test — Part 5: Water vapour condensation test,Meubles frigorifiques commerciaux — Méthodes d'essai — Partie 5: Essai de condensation de vapeur d'eau,1974-04-01,1,['97.130.20'],ISO/TC 86,9599,,"[37028,37029]","['en','fr']",1,"Describes the procedure of a water vapour condensation test for commercial refrigerated cabinets intended for the sale and/or display of food products, when tested on the same conditions as established for the temperature and defrosting tests (see parts 3 and 4 of ISO 1992).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1992-6:1974 - **Identifier:** ISO 1992-6:1974 _(verified: appears in the quote below)_ - **Item title:** Commercial refrigerated cabinets — Methods of test — Part 6: Electrical energy consumption test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23953-1:2005 | ISO 23953-2:2005 - **Withdrawn / published date:** 1974-07-01 _(verified: appears in the quote below)_ > 6738,IS,,ISO 1992-6:1974,Commercial refrigerated cabinets — Methods of test — Part 6: Electrical energy consumption test,Meubles frigorifiques commerciaux — Méthodes d'essai — Partie 6: Essai de consommation d'énergie électrique,1974-07-01,1,['97.130.20'],ISO/TC 86,9599,,"[37028,37029]","['en','fr']",1,"Applicable to commercial refrigerated cabinets intended for the sale and/or display of food products. The electrical energy consumption test shall be made in accordance with part 2 of ISO 1992 and on ambient conditions corresponding to the climate class(es) for which the cabinet is designed. In case of cabinets supplied without night-covers, any built-in cabinet lighting shall be on contin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1992-6:1974/Amd 1:1980 - **Identifier:** ISO 1992-6:1974/Amd 1:1980 _(verified: appears in the quote below)_ - **Item title:** Commercial refrigerated cabinets — Methods of test — Part 6: Electrical energy consumption test — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23953-1:2005 | ISO 23953-2:2005 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 6739,IS,Amd,ISO 1992-6:1974/Amd 1:1980,Commercial refrigerated cabinets — Methods of test — Part 6: Electrical energy consumption test — Amendment 1,Meubles frigorifiques commerciaux — Méthodes d'essai — Partie 6: Essai de consommation d'énergie électrique — Amendement 1,1980-08-01,1,['27.200'],ISO/TC 86,9599,,"[37028,37029]","['en','fr']",1,"
Sub-clause 4.2, add the following paragraph: 'For cabinets intended to be switched-off at night, the period for measurement electrical energy consumption from the time of switching-on shall be 10 h.' Clause 5, add the following sentence in c): 'For cabinets intended to be switched-off at night, the total electrical energy consumption during the test Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 70](https://referencesource.org/iso-standard-supersessions/p/70/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 72](https://referencesource.org/iso-standard-supersessions/p/72/) Last verified: 2026-08-05. Review by: 2027-02-02.