ISO 17616:2008 is one of a series providing guidance on the characterization of soils and soil materials in relation to their retention and habitat function and uses. It should be read in conjunction with the other standards in this series. It provides guidance on the choice and evaluation of tests ap Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1762:1974 - **Identifier:** ISO 1762:1974 _(verified: appears in the quote below)_ - **Item title:** Pulps — Determination of ash _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1762:2001 - **Withdrawn / published date:** 1974-09-01 _(verified: appears in the quote below)_ > 6392,IS,,ISO 1762:1974,Pulps — Determination of ash,Pâtes — Détermination des cendres,1974-09-01,1,['85.040'],ISO/TC 6,9599,,[31630],"['en','fr']",2,"
Specifies a method of determination of ash, which gives an estimation of the content of mineral salts and other inorganic matter contained in pulp. It applies to all kinds of pulp.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1762:2001 - **Identifier:** ISO 1762:2001 _(verified: appears in the quote below)_ - **Item title:** Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1762:2015 - **Withdrawn / published date:** 2001-12-20 _(verified: appears in the quote below)_ > 31630,IS,,ISO 1762:2001,"Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C","Papier, carton et pâtes — Détermination du résidu (cendres) après incinération à 525 degrés C",2001-12-20,2,['85.040'],ISO/TC 6,9599,[6392],[66537],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1762:2015 - **Identifier:** ISO 1762:2015 _(verified: appears in the quote below)_ - **Item title:** Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1762:2019 - **Withdrawn / published date:** 2015-06-10 _(verified: appears in the quote below)_ > 66537,IS,,ISO 1762:2015,"Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C","Papier, carton et pâtes — Détermination du résidu (cendres) après incinération à 525 degrés C",2015-06-10,3,['85.040'],ISO/TC 6,9599,[31630],[73414],"['en','fr']",6,"ISO/TS 1762:2015 describes the determination of the residue (ash) on ignition of paper, board and pulp at 525 °C. It is applicable to all types of paper, board, and pulp samples. The ash may consist of
a) mineral matter in the pulp and various residues from chemicals used in its manufacture,
b) metallic matter from piping and machinery, and
c) fillers, pigments, coatings, or residues from Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1763:1973 - **Identifier:** ISO 1763:1973 _(verified: appears in the quote below)_ - **Item title:** Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1763:1986 - **Withdrawn / published date:** 1973-09-01 _(verified: appears in the quote below)_ > 6393,IS,,ISO 1763:1973,Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area,Tapis-moquettes — Détermination du nombre de touffes ou de boucles par unité de surface et par unité de longueur,1973-09-01,1,['97.150'],ISO/TC 38,9599,,[6394],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1763:1986 - **Identifier:** ISO 1763:1986 _(verified: appears in the quote below)_ - **Item title:** Carpets — Determination of number of tufts and/or loops per unit length and per unit area _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1763:2020 - **Withdrawn / published date:** 1986-11-06 _(verified: appears in the quote below)_ > 6394,IS,,ISO 1763:1986,Carpets — Determination of number of tufts and/or loops per unit length and per unit area,Moquettes — Determination du nombre de touffes ou de boucles par unité de longueur et par unité de surface,1986-11-06,2,['97.150'],ISO/TC 219,9599,[6393],[74530],"['en','fr']",2,"
Applicable to carpets the pile of which consists of uniformly spaced tufts and/or loops. Tufts and loops are defined, and the procedure of determination is specified. - Replaces the first edition (ISO 1763-1973) to which has been added the clause 'Conditioning of test specimen', and clause 8 of which has been technically revised.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17631:2002 - **Identifier:** ISO 17631:2002 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Shipboard plans for fire protection, life-saving appliances and means of escape _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17631:2022 - **Withdrawn / published date:** 2002-02-28 _(verified: appears in the quote below)_ > 30775,IS,,ISO 17631:2002,"Ships and marine technology — Shipboard plans for fire protection, life-saving appliances and means of escape","Navires et technologie maritime — Plans de sécurité à bord du navire, des moyens de lutte contre l'incendie, des engins de sauvetage et des moyens d'évacuation",2002-02-28,1,['47.020.01'],ISO/TC 8/SC 1,9599,,[73477],['en'],28,"This International Standard specifies the content, type, design, layout and usage of shipboard plans for fireprotection
appliances, structural fire protection, life-saving appliances and arrangements, and means of escape. It
also specifies graphical symbols and illustrations used in such plans.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17631:2002/Amd 1:2010 - **Identifier:** ISO 17631:2002/Amd 1:2010 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Shipboard plans for fire protection, life-saving appliances and means of escape — Amendment 1: Requirements specific to high speed crafts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17631:2022 - **Withdrawn / published date:** 2010-04-27 _(verified: appears in the quote below)_ > 44458,IS,Amd,ISO 17631:2002/Amd 1:2010,"Ships and marine technology — Shipboard plans for fire protection, life-saving appliances and means of escape — Amendment 1: Requirements specific to high speed crafts","Navires et technologie maritime — Plans de sécurité à bord du navire, des moyens de lutte contre l'incendie, des engins de sauvetage et des moyens d'évacuation — Amendement 1: Exigences pour les navires rapides",2010-04-27,1,['47.020.01'],ISO/TC 8/SC 1,9599,,[73477],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17631:2002/Cor 1:2002 - **Identifier:** ISO 17631:2002/Cor 1:2002 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Shipboard plans for fire protection, life-saving appliances and means of escape — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17631:2022 - **Withdrawn / published date:** 2002-06-06 _(verified: appears in the quote below)_ > 37228,IS,Cor,ISO 17631:2002/Cor 1:2002,"Ships and marine technology — Shipboard plans for fire protection, life-saving appliances and means of escape — Technical Corrigendum 1","Navires et technologie maritime — Plans de sécurité à bord du navire, des moyens de lutte contre l'incendie, des engins de sauvetage et des moyens d'évacuation — Rectificatif technique 1",2002-06-06,1,['47.020.01'],ISO/TC 8/SC 1,9599,,[73477],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17632:2004 - **Identifier:** ISO 17632:2004 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17632:2015 - **Withdrawn / published date:** 2004-10-04 _(verified: appears in the quote below)_ > 29966,IS,,ISO 17632:2004,Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification,Produits consommables pour le soudage — Fils-électrodes fourrés pour soudage à l'arc avec ou sans gaz de protection des aciers non alliés et des aciers à grains fins — Classification,2004-10-04,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[64573],"['en','fr']",27,"ISO 17632:2004 specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of non-alloy and fine grain steels in the as-welded condition or in the post weld heat treated condition with a minimum yiel Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17633:2004 - **Identifier:** ISO 17633:2004 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17633:2010 - **Withdrawn / published date:** 2004-07-02 _(verified: appears in the quote below)_ > 29967,IS,,ISO 17633:2004,Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification,Produits consommables pour le soudage — Fils et baguettes fourrés pour le soudage à l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux températures élevées — Classification,2004-07-02,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[51247],"['en','fr']",25,"
ISO 17633:2004 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding position Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17633:2010 - **Identifier:** ISO 17633:2010 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17633:2017 - **Withdrawn / published date:** 2010-10-25 _(verified: appears in the quote below)_ > 51247,IS,,ISO 17633:2010,Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification,Produits consommables pour le soudage — Fils et baguettes fourrés pour le soudage à l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux températures élevées — Classification,2010-10-25,2,['25.160.20'],ISO/TC 44/SC 3,9599,[29967],[68754],"['en','fr']",27,"
ISO 17633:2010 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17633:2017 - **Identifier:** ISO 17633:2017 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17633:2025 - **Withdrawn / published date:** 2017-11-30 _(verified: appears in the quote below)_ > 68754,IS,,ISO 17633:2017,Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification,Produits consommables pour le soudage — Fils et baguettes fourrés pour le soudage à l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux températures élevées — Classification,2017-11-30,3,['25.160.20'],ISO/TC 44/SC 3,9599,[51247],[86736],"['en','fr']",31,"
ISO 17633:2017 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of core, shielding gas, welding position an Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17633:2017/Amd 1:2021 - **Identifier:** ISO 17633:2017/Amd 1:2021 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17633:2025 - **Withdrawn / published date:** 2021-06-08 _(verified: appears in the quote below)_ > 82005,IS,Amd,ISO 17633:2017/Amd 1:2021,Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification — Amendment 1,Produits consommables pour le soudage — Fils et baguettes fourrés pour le soudage à l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux températures élevées — Classification — Amendement 1,2021-06-08,3,['25.160.20'],ISO/TC 44/SC 3,9599,,[86736],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17634:2004 - **Identifier:** ISO 17634:2004 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17634:2015 - **Withdrawn / published date:** 2004-10-29 _(verified: appears in the quote below)_ > 29968,IS,,ISO 17634:2004,Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification,Produits consommables pour le soudage — Fils-électrodes fourrés pour le soudage à l'arc avec gaz de protection des aciers résistant au fluage — Classification,2004-10-29,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[64574],"['en','fr']",19,"
ISO 17634:2004 specifies requirements for classification of tubular cored electrodes used in the post weld heat treated condition for gas shielded metal arc welding of creep-resisting and low alloy elevated temperature steels. One tubular cored electrode can be tested and classified with different shielding gases Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17635:2003 - **Identifier:** ISO 17635:2003 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — General rules for fusion welds in metallic materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17635:2010 - **Withdrawn / published date:** 2003-08-21 _(verified: appears in the quote below)_ > 29969,IS,,ISO 17635:2003,Non-destructive testing of welds — General rules for fusion welds in metallic materials,Contrôle non destructif des assemblages soudés — Règles générales pour les soudures par fusion sur matériaux métalliques,2003-08-21,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[50439],"['en','fr']",14,"
ISO 17635:2003 gives guidance on the selection of method(s) for non-destructive testing of fusion welds in metallic materials based on material, weld thickness, welding process, quality control requirements and extent of testing. It specifies standards to be applied to the different types of testing and general rules for either the methodology or the acceptance level for metallic materi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17635:2010 - **Identifier:** ISO 17635:2010 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — General rules for metallic materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17635:2016 - **Withdrawn / published date:** 2010-02-23 _(verified: appears in the quote below)_ > 50439,IS,,ISO 17635:2010,Non-destructive testing of welds — General rules for metallic materials,Contrôle non destructif des assemblages soudés — Règles générales pour les matériaux métalliques,2010-02-23,2,['25.160.40'],ISO/TC 44/SC 5,9599,[29969],[66754],"['en','fr']",17,"
ISO 17635:2010 gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness, welding process, and extent of testing.
ISO 17635:2010 also specifies general rules and standards to be applied to the different types of testing, for either the methodology or the acceptance level for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17635:2016 - **Identifier:** ISO 17635:2016 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — General rules for metallic materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17635:2025 - **Withdrawn / published date:** 2016-11-25 _(verified: appears in the quote below)_ > 66754,IS,,ISO 17635:2016,Non-destructive testing of welds — General rules for metallic materials,Contrôle non destructif des assemblages soudés — Règles générales pour les matériaux métalliques,2016-11-25,3,['25.160.40'],ISO/TC 44/SC 5,9599,[50439],[85705],"['en','fr']",13,"
ISO 17635:2016 gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness, welding process and extent of testing.
ISO 17635:2016 also specifies general rules and standards to be applied to the different types of testing, for either the methodology or the acceptance levels for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17636-1:2013 - **Identifier:** ISO 17636-1:2013 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17636-1:2022 - **Withdrawn / published date:** 2013-01-08 _(verified: appears in the quote below)_ > 52981,IS,,ISO 17636-1:2013,Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film,Contrôle non destructif des assemblages soudés — Contrôle par radiographie — Partie 1: Techniques par rayons X ou gamma à l'aide de film,2013-01-08,1,['25.160.40'],ISO/TC 44/SC 5,9599,[29970],[78319],"['en','fr']",30,"
ISO 17636-1:2013 specifies techniques of radiographic examination of fusion welded joints in metallic materials using industrial radiographic film techniques.
ISO 17636-1:2013 applies to the joints of plates and pipes. Besides its conventional meaning, 'pipe' as used in this International Standard covers other cylindrical bodies such as tub Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17636-2:2013 - **Identifier:** ISO 17636-2:2013 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17636-2:2022 - **Withdrawn / published date:** 2013-01-08 _(verified: appears in the quote below)_ > 53390,IS,,ISO 17636-2:2013,Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors,Contrôle non destructif des assemblages soudés — Contrôle par radiographie — Partie 2: Techniques par rayons X ou gamma à l'aide de détecteurs numériques,2013-01-08,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[78320],"['en','fr']",52,"
ISO 17636-2:2013 specifies fundamental techniques of digital radiography with the object of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on generally recognized practice and fundamental theory of the subject.
ISO 17636-2:2013 applies to the digital radiographic exa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17636:2003 - **Identifier:** ISO 17636:2003 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — Radiographic testing of fusion-welded joints _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17636-1:2013 - **Withdrawn / published date:** 2003-09-08 _(verified: appears in the quote below)_ > 29970,IS,,ISO 17636:2003,Non-destructive testing of welds — Radiographic testing of fusion-welded joints,Contrôle non destructif des assemblages soudés — Contrôle par radiographie des assemblages soudés par fusion,2003-09-08,1,['25.160.40'],ISO/TC 44/SC 5,9599,"[5624,5625,5626]",[52981],"['en','fr']",35,
ISO 17636:2003 specifies fundamental techniques for radiographic examination of fusion welded joints in metallic materials. The object is to obtain satisfactory and repeatable results using the most economical methods. The techniques are based on generally recognized practice and fundamental theory of the subject.
ISO 17636:2003 applies to testing of fusion welded joints in plates or Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17637:2003 - **Identifier:** ISO 17637:2003 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — Visual testing of fusion-welded joints _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17637:2016 - **Withdrawn / published date:** 2003-08-11 _(verified: appears in the quote below)_ > 29971,IS,,ISO 17637:2003,Non-destructive testing of welds — Visual testing of fusion-welded joints,Contrôle non destructif des assemblages soudés — Contrôle visuel des assemblages soudés par fusion,2003-08-11,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[67259],"['en','fr']",10,
ISO 17637:2003 covers the visual examination of fusion welds in metallic materials. It may also be applied to visual examination of the joint prior to welding.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17638:2003 - **Identifier:** ISO 17638:2003 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — Magnetic particle testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17638:2016 - **Withdrawn / published date:** 2003-07-30 _(verified: appears in the quote below)_ > 29972,IS,,ISO 17638:2003,Non-destructive testing of welds — Magnetic particle testing,Contrôle non destructif des assemblages soudés — Contrôle par magnétoscopie,2003-07-30,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[67261],"['en','fr']",15,"ISO 17638:2003 specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques are suitable for most welding processes and joint configurations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17639:2003 - **Identifier:** ISO 17639:2003 _(verified: appears in the quote below)_ - **Item title:** Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17639:2022 - **Withdrawn / published date:** 2003-08-21 _(verified: appears in the quote below)_ > 29973,IS,,ISO 17639:2003,Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds,Essais destructifs des soudures sur matériaux métalliques — Examens macroscopique et microscopique des assemblages soudés,2003-08-21,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[81124],"['en','fr']",9,"ISO 17639:2003 gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1764:1975 - **Identifier:** ISO 1764:1975 _(verified: appears in the quote below)_ - **Item title:** Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8543:1986 - **Withdrawn / published date:** 1975-09-01 _(verified: appears in the quote below)_ > 6395,IS,,ISO 1764:1975,Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings,Revêtements de sol textiles fabriqués à la machine — Détermination de la masse totale par unité d'aire,1975-09-01,1,['97.150'],ISO/TC 38,9599,,[15793],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17640:2005 - **Identifier:** ISO 17640:2005 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — Ultrasonic testing of welded joints _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17640:2010 - **Withdrawn / published date:** 2005-07-18 _(verified: appears in the quote below)_ > 41344,IS,,ISO 17640:2005,Non-destructive testing of welds — Ultrasonic testing of welded joints,Contrôle non destructif des assemblages soudés — Contrôle par ultrasons des assemblages soudés,2005-07-18,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[50438],"['en','fr']",26,"ISO 17640:2005 specifies methods for manual ultrasonic testing of fusion-welded joints in metallic materials, greater than or equal to 8 mm thick, which exhibit low ultrasonic attenuation (especially that due to scatter). It is primarily intended for full penetration welded joints where both the welded and parent materials are ferritic.
It specifies four testing levels (A, B, C and D), each corresponding to a different pro Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17640:2010 - **Identifier:** ISO 17640:2010 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17640:2017 - **Withdrawn / published date:** 2010-12-09 _(verified: appears in the quote below)_ > 50438,IS,,ISO 17640:2010,"Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment","Contrôle non destructif des assemblages soudés — Contrôle par ultrasons — Techniques, niveaux d'essai et évaluation",2010-12-09,2,['25.160.40'],ISO/TC 44/SC 5,9599,[41344],[69611],"['en','fr']",26,"
ISO 17640:2010 specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness greater than or equal to 8 mm which exhibit low ultrasonic attenuation (especially that due to scatter) at object temperatures from 0 °C to 60 °C. It is primarily intended for use on full penetration welded joints where both the welded and par Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17640:2017 - **Identifier:** ISO 17640:2017 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17640:2018 - **Withdrawn / published date:** 2017-10-12 _(verified: appears in the quote below)_ > 69611,IS,,ISO 17640:2017,"Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment","Essais non destructifs des assemblages soudés — Contrôle par ultrasons — Techniques, niveaux d'essai et évaluation",2017-10-12,3,['25.160.40'],ISO/TC 44/SC 5,9599,[50438],[75737],"['en','fr']",29,"
ISO 17640:2017 specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness ≥8 mm which exhibit low ultrasonic attenuation (especially that due to scatter) at object temperatures from 0 °C to 60 °C. It is primarily intended for use on full penetration welded joints where both the welded and parent material are ferritic Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17641-2:2005 - **Identifier:** ISO 17641-2:2005 _(verified: appears in the quote below)_ - **Item title:** Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17641-2:2015 - **Withdrawn / published date:** 2005-04-12 _(verified: appears in the quote below)_ > 39623,IS,,ISO 17641-2:2005,Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests,Essais destructifs des soudures sur matériaux métalliques — Essais de fissuration à chaud des assemblages soudés — Procédés de soudage à l'arc — Partie 2: Essais sur éprouvettes auto-bridées,2005-04-12,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[67262],"['en','fr']",14,"
ISO 17641-2:2005 specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests.
The following tests are described:
ISO 17643:2005 defines eddy current testing techniques for detection of surface breaking and near surface planar discontinuities, mainly in ferritic materials (weld material, heat-affected zones, parent materials).
Eddy current testing can also be specified for use with non-ferritic materials, for example in an application standard.
The techniques Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1765:1975 - **Identifier:** ISO 1765:1975 _(verified: appears in the quote below)_ - **Item title:** Textile floor coverings — Determination of thickness of machine made textile floor coverings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1765:1986 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 6396,IS,,ISO 1765:1975,Textile floor coverings — Determination of thickness of machine made textile floor coverings,Revêtements de sol textiles fabriqués à la machine — Détermination de l'épaisseur totale,1975-11-01,1,['97.150'],ISO/TC 38,9599,,[6397],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17653:2003 - **Identifier:** ISO 17653:2003 _(verified: appears in the quote below)_ - **Item title:** Destructive tests on welds in metallic materials — Torsion test of resistance spot welds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17653:2012 - **Withdrawn / published date:** 2003-03-05 _(verified: appears in the quote below)_ > 29984,IS,,ISO 17653:2003,Destructive tests on welds in metallic materials — Torsion test of resistance spot welds,Essais destructifs des soudures sur matériaux métalliques — Essai de torsion de soudure par résistance par points,2003-03-05,1,['25.160.40'],ISO/TC 44/SC 6,9599,,[53806],"['en','fr']",6,"
ISO 17653:2003 is applicable to spot welded test specimens with single sheet thicknesses ranging from 0,5 mm to 3,0 mm in steels. It may be used for non-ferrous materials in certain circumstances.
The aim of this test is to determine the influence of different steel types, welding parameters and other factors on the deformation characteristics of a spot weld. Using this test, it is poss Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17654:2003 - **Identifier:** ISO 17654:2003 _(verified: appears in the quote below)_ - **Item title:** Destructive tests on welds in metallic materials — Resistance welding — Pressure test on resistance seam welds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17654:2011 - **Withdrawn / published date:** 2003-03-05 _(verified: appears in the quote below)_ > 29985,IS,,ISO 17654:2003,Destructive tests on welds in metallic materials — Resistance welding — Pressure test on resistance seam welds,Essais destructifs des soudures sur matériaux métalliques — Soudage par résistance — Essai de pression des soudures par résistance à la molette,2003-03-05,1,['25.160.40'],ISO/TC 44/SC 6,9599,,[53807],"['en','fr']",3,"
ISO 17654:2003 specifies the pressure test method to be applied to resistance seam welded specimens of different types of material, e.g. uncoated and coated ferritic steels and uncoated austenitic steel sheet with single sheet thicknesses ranging from 0,3 mm to 3,2 mm.
The purpose of this pressure test is to determine the suitability of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1766:1973 - **Identifier:** ISO 1766:1973 _(verified: appears in the quote below)_ - **Item title:** Textile floor coverings — Determination of thickness of pile above the backing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1766:1986 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 6398,IS,,ISO 1766:1973,Textile floor coverings — Determination of thickness of pile above the backing,Tapis et moquettes — Détermination de l'épaisseur du velours au-dessus du dossier,1973-12-01,1,['97.150'],ISO/TC 38,9599,,[6399],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1766:1986 - **Identifier:** ISO 1766:1986 _(verified: appears in the quote below)_ - **Item title:** Textile floor coverings — Determination of thickness of pile above the substrate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1766:1999 - **Withdrawn / published date:** 1986-11-06 _(verified: appears in the quote below)_ > 6399,IS,,ISO 1766:1986,Textile floor coverings — Determination of thickness of pile above the substrate,Revêtements de sol textiles — Détermination de l'épaisseur du velours au-dessus du soubassement,1986-11-06,2,['97.150'],ISO/TC 219,9599,[6398],[31552],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17662:2005 - **Identifier:** ISO 17662:2005 _(verified: appears in the quote below)_ - **Item title:** Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17662:2016 - **Withdrawn / published date:** 2005-03-17 _(verified: appears in the quote below)_ > 39628,IS,,ISO 17662:2005,"Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities","Soudage — Étalonnage, vérification et validation du matériel utilisé pour le soudage, y compris pour les procédés connexes",2005-03-17,1,['25.160.30'],ISO/TC 44/SC 10,9599,,[66052],"['en','fr']",31,"
ISO 17662:2005 specifies requirements for calibration, verification and validation of equipment used for:
where the resulting output cannot be readily or economically documented by subsequent Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17662:2016 - **Identifier:** ISO 17662:2016 _(verified: appears in the quote below)_ - **Item title:** Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17662:2025 - **Withdrawn / published date:** 2016-03-03 _(verified: appears in the quote below)_ > 66052,IS,,ISO 17662:2016,"Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities","Soudage — Étalonnage, vérification et validation du matériel utilisé pour le soudage, y compris pour les procédés connexes",2016-03-03,2,['25.160.30'],ISO/TC 44/SC 10,9599,[39628],[83737],"['en','fr']",29,"
ISO 17662:2016 specifies requirements for calibration, verification and validation of equipment used for
- control of process variables during fabrication, and
- control of the properties of equipment used for welding or welding allied processes
where the resulting output cannot be readily or economically documented by subsequ Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17663:2009 - **Identifier:** ISO 17663:2009 _(verified: appears in the quote below)_ - **Item title:** Welding — Quality requirements for heat treatment in connection with welding and allied processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17663:2023 - **Withdrawn / published date:** 2009-05-28 _(verified: appears in the quote below)_ > 43498,IS,,ISO 17663:2009,Welding — Quality requirements for heat treatment in connection with welding and allied processes,Soudage — Exigences de qualité relatives au traitement thermique associé au soudage et aux techniques connexes,2009-05-28,1,['25.160.01'],ISO/TC 44/SC 10,9599,[30003],[83142],"['en','fr','ru']",13,"
ISO 17663:2009 provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site in connection with welding and forming. It applies mainly to ferritic steels, but can be used for other materials, as appropriate.
ISO 17663:2009 provides guidance for manufacturers that perform heat treatment or produce heat-treated pr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17664:2004 - **Identifier:** ISO 17664:2004 _(verified: appears in the quote below)_ - **Item title:** Sterilization of medical devices — Information to be provided by the manufacturer for the processing of resterilizable medical devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17664:2017 - **Withdrawn / published date:** 2004-02-25 _(verified: appears in the quote below)_ > 31456,IS,,ISO 17664:2004,Sterilization of medical devices — Information to be provided by the manufacturer for the processing of resterilizable medical devices,Stérilisation des dispositifs médicaux - Informations devant être fournies par le fabricant pour le processus de restérilisation des dispositifs médicaux,2004-02-25,1,['11.080.01'],ISO/TC 198,9599,,[62952],['en'],18,"
ISO 17664:2004 specifies the information to be provided by the medical device manufacturer on the processing of medical devices claimed to be resterilizable, and medical devices intended to be sterilized by the processor. ISO 17664:2004 specifies requirements for the information to be provided by the medical device man Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17664:2017 - **Identifier:** ISO 17664:2017 _(verified: appears in the quote below)_ - **Item title:** Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17664-1:2021 - **Withdrawn / published date:** 2017-10-25 _(verified: appears in the quote below)_ > 62952,IS,,ISO 17664:2017,Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices,Traitement de produits de soins de santé — Informations relatives au traitement des dispositifs médicaux à fournir par le fabricant du dispositif,2017-10-25,2,['11.080.01'],ISO/TC 198,9599,[31456],[81720],"['en','fr']",24,
ISO 17664:2017 specifies requirements for the information to be provided by the medical device manufacturer for the processing of a medical device that requires cleaning followed by disinfection and/or sterilization to ensure that the device is safe and effective for its intended use.
This includes informa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17665-1:2006 - **Identifier:** ISO 17665-1:2006 _(verified: appears in the quote below)_ - **Item title:** Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17665:2024 - **Withdrawn / published date:** 2006-08-17 _(verified: appears in the quote below)_ > 43187,IS,,ISO 17665-1:2006,"Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices","Stérilisation des produits de santé — Chaleur humide — Partie 1: Exigences pour le développement, la validation et le contrôle de routine d'un procédé de stérilisation des dispositifs médicaux",2006-08-17,1,['11.080.01'],ISO/TC 198,9599,"[22270,19153]",[80271],"['en','fr','ru']",38,"
ISO 17665-1:2006 specifies requirements for the development, validation and routine control of a moist heat sterilization process for medical devices.
Moist heat sterilization processes covered by Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17666:2003 - **Identifier:** ISO 17666:2003 _(verified: appears in the quote below)_ - **Item title:** Space systems — Risk management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17666:2016 - **Withdrawn / published date:** 2003-03-31 _(verified: appears in the quote below)_ > 33149,IS,,ISO 17666:2003,Space systems — Risk management,Systèmes spatiaux — Management des risques,2003-03-31,1,['49.140'],ISO/TC 20/SC 14,9599,,[69239],"['en','fr']",19,"
ISO 17666:2003 extends the requirements of ISO 14300-1, the principles and requirements for integrated risk management on a space project. It explains what is needed to implement a project-integrated risk management policy by any project actor, at any level (i.e. customer, first-level supplier, or lower-level suppliers).
ISO 17666:2003 contains a summary of the general risk management process, which is subdivided into four (4) basic steps and nine (9) tasks. The implementation can be tailored to project-specific c Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17666:2016 - **Identifier:** ISO 17666:2016 _(verified: appears in the quote below)_ - **Item title:** Space systems — Risk management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 17666 | ISO 17666:2025 - **Withdrawn / published date:** 2016-11-14 _(verified: appears in the quote below)_ > 69239,IS,,ISO 17666:2016,Space systems — Risk management,Systèmes spatiaux — Management des risques,2016-11-14,2,['49.140'],ISO/TC 20/SC 14,9599,[33149],"[85539,89819]",['en'],20,"
ISO 17666:2016 defines, extending the requirements of ISO 14300‑1, the principles and requirements for integrated risk management on a space project. It explains what is needed to implement a project-integrated risk management policy by any project actor, at any level (i.e. customer, first-level supplier, or lower-level suppliers).
It contains a summary of the general risk management process, which is subdivided into four (4) basic steps and nine (9) tasks. The implementation can be tailored to project-spe Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17672:2010 - **Identifier:** ISO 17672:2010 _(verified: appears in the quote below)_ - **Item title:** Brazing — Filler metals _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17672:2016 - **Withdrawn / published date:** 2010-05-19 _(verified: appears in the quote below)_ > 45707,IS,,ISO 17672:2010,Brazing — Filler metals,Brasage fort — Métaux d'apport,2010-05-19,1,['25.160.50'],ISO/TC 44,9599,,[63627],"['en','fr','ru']",22,"
ISO 17672:2010 specifies the compositional ranges of a series of filler metals used for brazing. The filler metals are divided into seven classes, related to their composition, but not necessarily to the major element present.
In the case of composite products, such as flux-coated rods, pastes or plastics tapes, ISO 17672:2010 covers only the filler metal that forms part of such products.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17672:2016 - **Identifier:** ISO 17672:2016 _(verified: appears in the quote below)_ - **Item title:** Brazing — Filler metals _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17672:2024 - **Withdrawn / published date:** 2016-09-02 _(verified: appears in the quote below)_ > 63627,IS,,ISO 17672:2016,Brazing — Filler metals,Brasage fort — Métaux d'apport,2016-09-02,2,['25.160.50'],ISO/TC 44/SC 13,9599,[45707],[84344],"['en','fr']",21,"ISO 17672:2016 specifies the compositional ranges of a series of filler metals used for brazing. The filler metals are divided into seven classes, related to their composition, but not necessarily to the major element present.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17677-1:2009 - **Identifier:** ISO 17677-1:2009 _(verified: appears in the quote below)_ - **Item title:** Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI TR 25901-6 | ISO 17677-1:2019 - **Withdrawn / published date:** 2009-06-16 _(verified: appears in the quote below)_ > 44765,IS,,ISO 17677-1:2009,"Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding","Soudage par résistance — Vocabulaire — Partie 1: Soudage par points, par bossages et à la molette",2009-06-16,1,"['25.160.10','01.040.25']",ISO/TC 44/SC 6,9599,,"[62525,70524]","['en','fr']",36,"ISO 17677-1:2009 establishes a vocabulary of terms and definitions for resistance spot welding, projection welding and seam welding.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17677-1:2019 - **Identifier:** ISO 17677-1:2019 _(verified: appears in the quote below)_ - **Item title:** Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17677-1:2021 - **Withdrawn / published date:** 2019-02-15 _(verified: appears in the quote below)_ > 70524,IS,,ISO 17677-1:2019,"Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding","Soudage par résistance — Vocabulaire — Partie 1: Soudage par points, par bossages et à la molette",2019-02-15,2,"['25.160.10','01.040.25']",ISO/TC 44/SC 6,9599,[44765],[81479],"['de','en','fr']",44,"This document establishes a vocabulary of terms and definitions for resistance spot welding, projection welding and seam welding.
NOTE In addition to terms used in English and French, two of the three official ISO languages, this document gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the te Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17678:2010 - **Identifier:** ISO 17678:2010 _(verified: appears in the quote below)_ - **Item title:** Milk and milk products — Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17678:2019 - **Withdrawn / published date:** 2010-02-02 _(verified: appears in the quote below)_ > 43899,IS,,ISO 17678:2010,Milk and milk products — Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method),Lait et produits laitiers — Détermination de la pureté des matières grasses laitières par analyse chromatographique en phase gazeuse des triglycérides (Méthode de référence),2010-02-02,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[72284],"['en','fr']",22,"
ISO 17678|IDF 202:2010 specifies a reference method for the determination of milk fat purity using gas chromatographic analysis of triglycerides. Both vegetable fats and animal fats such as beef tallow and lard can be detected. By using defined triglyceride equations, the integrity of milk fat is Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17689:2015 - **Identifier:** ISO 17689:2015 _(verified: appears in the quote below)_ - **Item title:** Space systems — Interface control documents between ground systems, ground support equipment and launch vehicle with payload _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17689:2023 - **Withdrawn / published date:** 2015-10-20 _(verified: appears in the quote below)_ > 60263,IS,,ISO 17689:2015,"Space systems — Interface control documents between ground systems, ground support equipment and launch vehicle with payload","Systèmes spatiaux — Documents de contrôle d'interface entre les systèmes au sol, l'équipement de soutien au sol et le véhicule de lancement de charge utile",2015-10-20,1,['49.140'],ISO/TC 20/SC 14,9599,,[83490],['en'],17,"
ISO 17689:2015 is applied for organizations developing ground support equipment and also for operators performing space activity.
Interface control documents format defined here does not contain the descriptions regarding various properties of ground support equipment (i.e. performance, functions or endurance to la Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17694:2003 - **Identifier:** ISO 17694:2003 _(verified: appears in the quote below)_ - **Item title:** Footwear — Test methods for uppers and lining — Flex resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17694:2016 - **Withdrawn / published date:** 2003-09-15 _(verified: appears in the quote below)_ > 31465,IS,,ISO 17694:2003,Footwear — Test methods for uppers and lining — Flex resistance,Chaussures — Méthodes d'essai pour les tiges et les doublures — Résistance à la flexion,2003-09-15,1,['61.060'],ISO/TC 216,9599,,[60978],"['en','fr']",6,"
ISO 17694:2003 specifies a test method for determining the flex resistance of uppers and linings irrespective of the material, in order to assess the suitability for the end use.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17697:2003 - **Identifier:** ISO 17697:2003 _(verified: appears in the quote below)_ - **Item title:** Footwear — Test methods for uppers, lining and insocks — Seam strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17697:2016 - **Withdrawn / published date:** 2003-10-28 _(verified: appears in the quote below)_ > 31468,IS,,ISO 17697:2003,"Footwear — Test methods for uppers, lining and insocks — Seam strength","Chaussures — Méthodes d'essai relatives aux tiges, doublures et premières de propreté — Résistance des piqûres",2003-10-28,1,['61.060'],ISO/TC 216,9599,,[60979],"['en','fr']",10,"ISO 17697:2003 specifies two test methods for determining the seam strength of uppers, lining or insocks, irrespective of the material, in order to assess the suitability for the end use.
These methods are:
Method A: Needle perforations - for determining the force required to pull a row of needles through an upper material, in a direction perpendicular to the row.
Method B: Stitched seams - for det Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17698:2003 - **Identifier:** ISO 17698:2003 _(verified: appears in the quote below)_ - **Item title:** Footwear — Test methods for uppers — Delamination resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17698:2016 - **Withdrawn / published date:** 2003-10-28 _(verified: appears in the quote below)_ > 31469,IS,,ISO 17698:2003,Footwear — Test methods for uppers — Delamination resistance,Chaussures — Méthodes d'essai des tiges — Résistance au délaminage,2003-10-28,1,['61.060'],ISO/TC 216,9599,,[60980],"['en','fr']",8,"
ISO 17698:2003 specifies a test method for determining the delamination resistance of uppers irrespective of the material, in order to assess the suitability for the end use.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 177:1976 - **Identifier:** ISO 177:1976 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of migration of plasticizers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 177:1988 - **Withdrawn / published date:** 1976-07-01 _(verified: appears in the quote below)_ > 4013,IS,,ISO 177:1976,Plastics — Determination of migration of plasticizers,Matières plastiques — Détermination de la migration des plastifiants,1976-07-01,1,['83.080.01'],ISO/TC 61,9599,,[4014],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 177:1988 - **Identifier:** ISO 177:1988 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of migration of plasticizers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 177:2016 - **Withdrawn / published date:** 1988-06-23 _(verified: appears in the quote below)_ > 4014,IS,,ISO 177:1988,Plastics — Determination of migration of plasticizers,Plastiques — Détermination de la migration des plastifiants,1988-06-23,2,['83.080.01'],ISO/TC 61/SC 6,9599,[4013],[70279],"['en','fr']",3,"Specification of a method for the determination of the tendency of plasticisers to migrate from plastics into other materials or other plastics, when they are brought into close contact. A test specimen cut from a sheet or plate of the material to be tested is placed in close contact with two sheets capable of absorbing plasticisers. It is then subjected to heating under defined conditions. The loss in mass of the test specimen is a measure of the plasticiser migration.
" 40 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17700:2004 - **Identifier:** ISO 17700:2004 _(verified: appears in the quote below)_ - **Item title:** Footwear — Test methods for uppers, linings and insocks — Colour fastness to rubbing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17700:2019 - **Withdrawn / published date:** 2004-10-26 _(verified: appears in the quote below)_ > 31471,IS,,ISO 17700:2004,"Footwear — Test methods for uppers, linings and insocks — Colour fastness to rubbing","Chaussures — Méthodes d'essai des tiges, des doublures et des garnitures intérieures — Stabilité de la couleur au frottement",2004-10-26,1,['61.060'],ISO/TC 216,9599,,[68279],"['en','fr']",12,"ISO 17700:2004 specifies two test methods for assessing the degree of damage (marring) and transfer of a material's surface colour during mild dry or wet abrasion. The methods are applicable to all footwear uppers, linings and insocks irrespective of the material, in order to assess suitability for end use.
ISO 17700:2004 also specifies a method for determining the likelihood of col Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17701:2003 - **Identifier:** ISO 17701:2003 _(verified: appears in the quote below)_ - **Item title:** Footwear — Test methods for uppers, lining and insocks — Colour migration _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17701:2016 - **Withdrawn / published date:** 2003-10-20 _(verified: appears in the quote below)_ > 31472,IS,,ISO 17701:2003,"Footwear — Test methods for uppers, lining and insocks — Colour migration","Chaussures — Méthodes d'essai des tiges, de la doublure et des garnitures intérieures — Migration de la couleur",2003-10-20,1,['61.060'],ISO/TC 216,9599,,[60981],"['en','fr']",4,"
ISO 17701:2003 specifies a test method for determining the propensity of a material to cause discolouration of another material when stored in close contact. This method is applicable to all materials which are used in intimate contact, and to adhesives which are used to bond them.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17708:2003 - **Identifier:** ISO 17708:2003 _(verified: appears in the quote below)_ - **Item title:** Footwear — Test methods for whole shoe — Upper sole adhesion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17708:2018 - **Withdrawn / published date:** 2003-07-25 _(verified: appears in the quote below)_ > 31479,IS,,ISO 17708:2003,Footwear — Test methods for whole shoe — Upper sole adhesion,Chaussures — Méthodes d'essai applicables à la chaussure entière — Liaison tige semelle,2003-07-25,1,['61.060'],ISO/TC 216,9599,,[68281],"['en','fr']",9,"ISO 17708:2003 describes a test method for the determination of the resistance to separation of the upper from the outsole or the resistance to separation of adjacent layers of the outsole or resistance to tear failure of the upper or the sole. It also defines conditions of ageing that can be used for production control.
It applies to all types of footwear (produced by cementing, vulcanization, injection moulding, etc.) for which evaluation of adh Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1771:1981 - **Identifier:** ISO 1771:1981 _(verified: appears in the quote below)_ - **Item title:** Enclosed-scale general purpose thermometers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 1771 - **Withdrawn / published date:** 1981-06-01 _(verified: appears in the quote below)_ > 6405,IS,,ISO 1771:1981,Enclosed-scale general purpose thermometers,Thermomètres à échelle protégée d'usage général,1981-06-01,1,['17.200.20'],ISO/TC 48,9599,,[74918],"['en','fr']",3,"
The specified requirements deal with a series of inexpensive 'commercial' liquid-in-glass thermometers, when great accuracy of measurement is not required. The temperature range covered is from -100 degrees centigrade to +500 degress Centigrade. Temperature scale, immersion, liquid- and gasfilling and the properties of glass are specified. Details of the construction with graduation and marking and expansion volume are described.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1771:1981/Amd 1:1983 - **Identifier:** ISO 1771:1981/Amd 1:1983 _(verified: appears in the quote below)_ - **Item title:** Enclosed-scale general purpose thermometers — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 1771 - **Withdrawn / published date:** 1983-08-01 _(verified: appears in the quote below)_ > 6406,IS,Amd,ISO 1771:1981/Amd 1:1983,Enclosed-scale general purpose thermometers — Amendment 1,Thermomètres à échelle protégée d'usage général — Amendement 1,1983-08-01,1,['17.200.20'],ISO/TC 48,9599,,[74918],"['en','fr']",1,"Page 2, clause 11: add '11.1' as a sub-clause number at the beginning of the first sentence. Replace the existing sub-clause '11 f)' by '11.2 In addition to 11.1, if the purchaser requires the thermometer to bear an identifying number, the following inscription shall also be durably and legibly marked on the thermometer: manufacturer's identification or serial number, the last two digits of which should indicate the year of manufacture.'
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17710:2002 - **Identifier:** ISO 17710:2002 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17710:2023 - **Withdrawn / published date:** 2002-06-06 _(verified: appears in the quote below)_ > 33185,IS,,ISO 17710:2002,Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration,Plastiques — Polyols pour la production du polyuréthanne — Détermination du degré de non-saturation par microtitrage,2002-06-06,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[85620],['en'],6,"This International Standard specifies a microtitration method to measure the degree of unsaturation in polyether polyols used in the production of polyurethanes. It is based on the reaction of mercuric acetate with double bonds in the polyol. It does not apply to compounds in which the unsaturation is conjugated with carbonyl, carboxyl or nitrile groups. The produc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17712:2010 - **Identifier:** ISO 17712:2010 _(verified: appears in the quote below)_ - **Item title:** Freight containers — Mechanical seals _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17712:2013 - **Withdrawn / published date:** 2010-09-03 _(verified: appears in the quote below)_ > 41017,IS,,ISO 17712:2010,Freight containers — Mechanical seals,Conteneurs pour le transport de marchandises — Scellés mécaniques,2010-09-03,1,['55.180.10'],ISO/TC 104,9599,[42791],[62464],"['en','fr']",31,"
ISO 17712:2010 establishes uniform procedures for the classification, acceptance and withdrawal of acceptance of mechanical freight container seals. It provides a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce.
The purpose of mechanical seals is, as part of a security system, to determine whether a freight container has been tampered with, i.e. whether there has been unauthorized entry into the contai Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17715:2013 - **Identifier:** ISO 17715:2013 _(verified: appears in the quote below)_ - **Item title:** Flour from wheat (Triticum aestivum L.) — Amperometric method for starch damage measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17715:2025 - **Withdrawn / published date:** 2013-01-31 _(verified: appears in the quote below)_ > 60270,IS,,ISO 17715:2013,Flour from wheat (Triticum aestivum L.) — Amperometric method for starch damage measurement,Farine de blé tendre (Triticum aestivum L.) — Méthode ampérométrique pour le mesurage de l'endommagement de l'amidon,2013-01-31,1,['67.060'],ISO/TC 34/SC 4,9599,,[76510],"['en','fr','ru']",13,
ISO 17715:2013 specifies the determination of the damage to starch using an amperometric method.
It is applicable to all flour samples from industrial or laboratory milling of wheat (Triticum aestivum L.).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17717:2017 - **Identifier:** ISO 17717:2017 _(verified: appears in the quote below)_ - **Item title:** Meteorological balloons — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17717:2024 - **Withdrawn / published date:** 2017-08-03 _(verified: appears in the quote below)_ > 63428,IS,,ISO 17717:2017,Meteorological balloons — Specification,Ballons météorologiques — Spécifications,2017-08-03,1,"['83.140.99','07.060']",ISO/TC 45/SC 4,9599,,[84077],['en'],21,ISO 17717:2017 specifies the minimum requirements and test methods for meteorological balloons made from natural rubber latex or natural rubber latex compounded with synthetic rubber emulsion.
ISO 17717:2017 applies to two types of balloon:
- Type 1: meteorological balloon produced by dipping process;
- Type 2: meteorological balloon produced by moulding process.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17724:2003 - **Identifier:** ISO 17724:2003 _(verified: appears in the quote below)_ - **Item title:** Graphical symbols — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17724:2026 - **Withdrawn / published date:** 2003-08-21 _(verified: appears in the quote below)_ > 33186,IS,,ISO 17724:2003,Graphical symbols — Vocabulary,Symboles graphiques — Vocabulaire,2003-08-21,1,"['01.080.01','01.040.01']",ISO/TC 145,9599,,[90529],"['en','fr']",14,"ISO 17724:2003 defines terms relating to graphical symbols, principally symbols for public information and use on equipment and safety signs. It does not include terms related to graphical symbols for diagrams [technical product documentation (tpd) symbols].
The definitions are intended to serve as a basis for consideration by those concerned with producing new, or revising existing standards.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1773:1976 - **Identifier:** ISO 1773:1976 _(verified: appears in the quote below)_ - **Item title:** Laboratory glassware — Boiling flasks (narrow-necked) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1773:1997 - **Withdrawn / published date:** 1976-08-01 _(verified: appears in the quote below)_ > 6408,IS,,ISO 1773:1976,Laboratory glassware — Boiling flasks (narrow-necked),Verrerie de laboratoire — Fioles coniques et ballons (à col étroit),1976-08-01,1,['71.040.20'],ISO/TC 48,9599,,[25437],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17730:2014 - **Identifier:** ISO 17730:2014 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Fluoride varnishes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17730:2020 - **Withdrawn / published date:** 2014-10-29 _(verified: appears in the quote below)_ > 60325,IS,,ISO 17730:2014,Dentistry — Fluoride varnishes,Médecine bucco-dentaire — Vernis fluorés,2014-10-29,1,['97.170'],ISO/TC 106/SC 7,9599,,[72166],"['en','fr']",6,"ISO 17730:2014 specifies requirements and their test methods for total digestible fluoride content in dental varnishes containing fluoride, intended for use in the oral cavity directly on the outer surfaces of teeth and fillings. It also specifies the requirements for their packaging and labelling, including the instructions for use. This International Standard covers fluoride varnishes to be applied by dental health care workers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17730:2020 - **Identifier:** ISO 17730:2020 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Fluoride varnishes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17730:2025 - **Withdrawn / published date:** 2020-09-23 _(verified: appears in the quote below)_ > 72166,IS,,ISO 17730:2020,Dentistry — Fluoride varnishes,Médecine bucco-dentaire — Vernis fluorés,2020-09-23,2,['97.170'],ISO/TC 106/SC 7,9599,[60325],[82413],"['en','fr']",11,"This document specifies requirements and test methods for total digestible fluoride content and a minimum soluble fluoride release potential in dental varnishes containing fluoride, intended for use in the oral cavity directly on the outer surfaces of teeth and fillings. It also specifies packaging and labelling requirements, including the instructions for use. This document covers fluoride varnishes to be applied by dental health care workers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17733:2004 - **Identifier:** ISO 17733:2004 _(verified: appears in the quote below)_ - **Item title:** Workplace air — Determination of mercury and inorganic mercury compounds — Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17733:2015 - **Withdrawn / published date:** 2004-11-18 _(verified: appears in the quote below)_ > 31514,IS,,ISO 17733:2004,Workplace air — Determination of mercury and inorganic mercury compounds — Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry,Air des lieux de travail — Détermination du mercure et des composés minéraux de mercure — Méthode par spectrométrie d'absorption atomique ou spectrométrie de fluorescence atomique de la vapeur froide,2004-11-18,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[67798],"['en','fr']",51,"ISO 17733:2004 specifies a procedure for determination of the time-weighted average mass concentration of mercury vapour and inorganic mercury compounds in workplace air. Mercury vapour is collected on a solid sorbent using either a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17734-1:2006 - **Identifier:** ISO 17734-1:2006 _(verified: appears in the quote below)_ - **Item title:** Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 1: Isocyanates using dibutylamine derivatives _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17734-1:2013 - **Withdrawn / published date:** 2006-03-03 _(verified: appears in the quote below)_ > 40288,IS,,ISO 17734-1:2006,Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 1: Isocyanates using dibutylamine derivatives,Détermination des composés organiques azotés dans l'air par chromatographie liquide et spectrométrie de masse — Partie 1: Isocyanates par les dérivés de la dibutylamine,2006-03-03,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[58006],['en'],29,"
ISO 17734-1:2006 gives general guidance for the sampling and analysis of airborne isocyanates in workplace air. The method is suitable for the determination of a wide range of different isocyanates in both the gas and particle phases. Typical monofunctional isocyanates that can be Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17734-1:2013 - **Identifier:** ISO 17734-1:2013 _(verified: appears in the quote below)_ - **Item title:** Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 1: Isocyanates using dibutylamine derivatives _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17734-1:2026 - **Withdrawn / published date:** 2013-11-27 _(verified: appears in the quote below)_ > 58006,IS,,ISO 17734-1:2013,Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 1: Isocyanates using dibutylamine derivatives,Détermination des composés organiques azotés dans l'air par chromatographie liquide et spectrométrie de masse — Partie 1: Isocyanates par les dérivés de la dibutylamine,2013-11-27,2,['13.040.30'],ISO/TC 146/SC 2,9599,[40288],[87012],['en'],33,"
ISO 17734-1:2013 gives general guidance for the sampling and analysis of airborne isocyanates in workplace air. When amines and aminoisocyanates are suspected to be emitted (e.g. from thermal degradation of PUR), it is recommended that, in addition to isocyanates, the amine Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17734-2:2006 - **Identifier:** ISO 17734-2:2006 _(verified: appears in the quote below)_ - **Item title:** Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17734-2:2013 - **Withdrawn / published date:** 2006-03-03 _(verified: appears in the quote below)_ > 40289,IS,,ISO 17734-2:2006,Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives,Détermination des composés organiques azotés dans l'air par chromatographie liquide et spectrométrie de masse — Partie 2: Amines et aminoisocyanates par les dérivés de la dibutylamine et du chloroformate d'éthyle,2006-03-03,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[58007],['en'],28,"
ISO 17734-2:2006 gives general guidance for the sampling and analysis of airborne amines and aminoisocyanates in workplace air. The method can be used for simultaneous determinations of amines, 4,4 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17735:2009 - **Identifier:** ISO 17735:2009 _(verified: appears in the quote below)_ - **Item title:** Workplace atmospheres — Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17735:2019 - **Withdrawn / published date:** 2009-03-11 _(verified: appears in the quote below)_ > 46544,IS,,ISO 17735:2009,Workplace atmospheres — Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography,Air des lieux de travail — Dosage des groupements isocyanates totaux dans l'air par réaction avec la 1-(9-anthracénylméthyl)pipérazine (MAP) et par chromatographie en phase liquide,2009-03-11,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[70406],['en'],28,"
ISO 17735:2009 gives general guidance for the sampling and analysis of airborne organic isocyanates in workplace air.
ISO 17735:2009 is appropriate for a wide range of organic compounds containing isocyanate groups, including monofunctional isocyanates (e.g. phenyl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17738-1:2017 - **Identifier:** ISO 17738-1:2017 _(verified: appears in the quote below)_ - **Item title:** Thermal insulation products — Exterior insulation and finish systems — Part 1: Materials and systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17738-1:2021 - **Withdrawn / published date:** 2017-03-07 _(verified: appears in the quote below)_ > 60340,IS,,ISO 17738-1:2017,Thermal insulation products — Exterior insulation and finish systems — Part 1: Materials and systems,Produits isolants thermiques — Systèmes de finition et d'isolation externe — Partie 1: Materiaux et systèmes,2017-03-07,1,['91.100.60'],ISO/TC 163/SC 3,9599,,[76852],['en'],62,"
ISO 17738-1:2017 outlines requirements for exterior insulation and finish systems (EIFS), used in combination with a drained air space as an exterior wall cladding system. It also outlines the requirements for water resistive barrier systems that are to be used with EIFS.
The EIFS wall cladding system is comprised of liquid-applied water resistive barrier, an adhesive for attachment Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17744:2004 - **Identifier:** ISO 17744:2004 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17744:2025 - **Withdrawn / published date:** 2004-11-23 _(verified: appears in the quote below)_ > 33196,IS,,ISO 17744:2004,Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method,Plastiques — Détermination du volume spécifique en fonction de la température et de la pression (diagramme pvT) — Méthode utilisant un appareil à piston,2004-11-23,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[85976],"['en','fr']",18,"
ISO 17744:2004 describes procedures for determining the specific volume of plastics as a function of temperature and pressure in both the molten and solid states.
The standard specifies the use of a piston-equipped apparatus in which the test sample, held in a measurement cell, is pressurized by means of the pis Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17751-1:2016 - **Identifier:** ISO 17751-1:2016 _(verified: appears in the quote below)_ - **Item title:** Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 1: Light microscopy method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17751-1:2023 - **Withdrawn / published date:** 2016-03-09 _(verified: appears in the quote below)_ > 62692,IS,,ISO 17751-1:2016,"Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 1: Light microscopy method","Textiles — Analyse quantitative du cachemire, de la laine, d'autres fibres animales spéciales et leurs mélanges — Partie 1: Méthode de microscopie optique",2016-03-09,1,['59.060.10'],ISO/TC 38,9599,[38026],[83595],"['en','fr']",41,"
ISO 17751-1:2016 specifies a method for the identification, qualitative, and quantitative analysis of cashmere, wool, other speciality animal fibres, and their blends using light microscopy (LM).
ISO 17751-1:2016 is applicable to loose fibres, intermediate-products, and final products of cashmer Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17751-2:2016 - **Identifier:** ISO 17751-2:2016 _(verified: appears in the quote below)_ - **Item title:** Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 2: Scanning electron microscopy method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17751-2:2023 - **Withdrawn / published date:** 2016-03-09 _(verified: appears in the quote below)_ > 62693,IS,,ISO 17751-2:2016,"Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 2: Scanning electron microscopy method","Textiles — Analyse quantitative du cachemire, de la laine, d'autres fibres animales spéciales et leurs mélanges — Partie 2: Méthode par microscopie électronique à balayage",2016-03-09,1,['59.060.10'],ISO/TC 38,9599,[38026],[83596],"['en','fr']",48,"
ISO 17751-2:2016 specifies a method for the identification, qualitative, and quantitative analysis of cashmere, wool, other speciality animal fibres, and their blends using scanning electron microscopy (SEM).
ISO 17751-2:2016 is applicable to loose fibres, intermedia Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17751:2007 - **Identifier:** ISO 17751:2007 _(verified: appears in the quote below)_ - **Item title:** Textiles — Quantitative analysis of animal fibres by microscopy — Cashmere, wool, speciality fibres and their blends _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17751-1:2016 | ISO 17751-2:2016 - **Withdrawn / published date:** 2007-11-20 _(verified: appears in the quote below)_ > 38026,IS,,ISO 17751:2007,"Textiles — Quantitative analysis of animal fibres by microscopy — Cashmere, wool, speciality fibres and their blends","Textiles — Analyse quantitative des fibres animales par microscopie — Cachemire, laine, fibres spéciales et leurs mélanges",2007-11-20,1,['59.060.10'],ISO/TC 38,9599,,"[62692,62693]","['en','fr']",20,
ISO 17751:2007 specifies a method for the identification and quantitative analysis of wool and speciality animal fibres using both light microscopy (LM) and scanning electron microscopy (SEM). The standard is also applicable to blends of animal fibres and products made from them.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17757:2017 - **Identifier:** ISO 17757:2017 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery and mining — Autonomous and semi-autonomous machine system safety _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17757:2019 - **Withdrawn / published date:** 2017-10-03 _(verified: appears in the quote below)_ > 60473,IS,,ISO 17757:2017,Earth-moving machinery and mining — Autonomous and semi-autonomous machine system safety,Engins de terrassement et exploitation minière — Sécurité de système de machine autonome et semi-autonome,2017-10-03,1,['53.100'],ISO/TC 127/SC 2,9599,,[76126],['en'],36,"ISO 17757 provides safety requirements for autonomous machines and semi-autonomous machines used in earth-moving and mining operations, and their autonomous or semi-autonomous machine systems (ASAMS). It specifies safety criteria both for the machines and their associated systems and infrastructure, including hardware and software, and provides guidance on safe use in their defined functional environments dur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17769:2008 - **Identifier:** ISO 17769:2008 _(verified: appears in the quote below)_ - **Item title:** Liquid pumps and installation — General terms — Definitions, quantities, letter symbols and units _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17769-1:2012 - **Withdrawn / published date:** 2008-03-10 _(verified: appears in the quote below)_ > 41620,IS,,ISO 17769:2008,"Liquid pumps and installation — General terms — Definitions, quantities, letter symbols and units","Pompes pour liquides et installations — Termes généraux — Définitions, grandeurs, symboles littéraux et unités",2008-03-10,1,['23.080'],ISO/TC 115,9599,,[55821],"['en','fr']",48,"
ISO 17769:2008 deals with terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of clarifying communications between the installation designer, manufacturer, operator and plant constructor.
ISO 17769:2008 identifies the units in common usage but all other legal units Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17776:2000 - **Identifier:** ISO 17776:2000 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Offshore production installations — Guidelines on tools and techniques for hazard identification and risk assessment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17776:2016 - **Withdrawn / published date:** 2000-10-19 _(verified: appears in the quote below)_ > 31534,IS,,ISO 17776:2000,Petroleum and natural gas industries — Offshore production installations — Guidelines on tools and techniques for hazard identification and risk assessment,Industries du pétrole et du gaz naturel — Installations des plates-formes en mer — Lignes directrices relatives aux outils et techniques pour l'identification et l'évaluation des risques,2000-10-19,1,['75.180.10'],ISO/TC 67/SC 6,9599,,[63062],['en'],59,"
La présente Norme internationale décrit quelques-uns des principaux outils et techniques qui sont d'un usage commun pour l'identification et l'évaluation des dangers associés aux activités d'exploration et de production en mer du pétrole et de gaz, comprenant le Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 178:1975 - **Identifier:** ISO 178:1975 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of flexural properties of rigid plastics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 178:1993 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 4015,IS,,ISO 178:1975,Plastics — Determination of flexural properties of rigid plastics,Matières plastiques — Détermination des caractéristiques de flexion des matières plastiques rigides,1975-12-01,2,['83.080.01'],ISO/TC 61,9599,,[4016],['en'],5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 178:1993 - **Identifier:** ISO 178:1993 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of flexural properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 178:2001 - **Withdrawn / published date:** 1993-05-06 _(verified: appears in the quote below)_ > 4016,IS,,ISO 178:1993,Plastics — Determination of flexural properties,Plastiques — Détermination des propriétés en flexion,1993-05-06,3,['83.080.01'],ISO/TC 61/SC 2,9599,[4015],[31258],"['en','fr']",8,"
The principle of the method specified is to deflect the test specimen, supported as a beam, at constant rate at the midspan until the specimen fractures or until the deformation reaches some predetermined value. During this procedure the force applied to the specimen is measured. The method is applicable to rigid thermoplastics moulding and extrusion materials, rigid thermosetting moulding materials, fibre-reinforced thermoset and thermoplastics composites, thermotropic liquid-crystal polym Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 178:2001 - **Identifier:** ISO 178:2001 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of flexural properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 178:2010 - **Withdrawn / published date:** 2001-12-20 _(verified: appears in the quote below)_ > 31258,IS,,ISO 178:2001,Plastics — Determination of flexural properties,Plastiques — Détermination des propriétés en flexion,2001-12-20,4,['83.080.01'],ISO/TC 61/SC 2,9599,[4016],[45091],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 178:2001/Amd 1:2004 - **Identifier:** ISO 178:2001/Amd 1:2004 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of flexural properties — Amendment 1: Precision statement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 178:2010 - **Withdrawn / published date:** 2004-02-12 _(verified: appears in the quote below)_ > 36921,IS,Amd,ISO 178:2001/Amd 1:2004,Plastics — Determination of flexural properties — Amendment 1: Precision statement,Plastiques — Détermination des propriétés en flexion — Amendement 1: Déclaration de fidélité,2004-02-12,4,['83.080.01'],ISO/TC 61/SC 2,9599,,[45091],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 178:2010 - **Identifier:** ISO 178:2010 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of flexural properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 178:2019 - **Withdrawn / published date:** 2010-12-06 _(verified: appears in the quote below)_ > 45091,IS,,ISO 178:2010,Plastics — Determination of flexural properties,Plastiques — Détermination des propriétés en flexion,2010-12-06,5,['83.080.01'],ISO/TC 61/SC 2,9599,"[31258,36921]",[70513],"['en','fr']",19,"
ISO 178:2010 specifies a method for determining the flexural properties of rigid and semi-rigid plastics under defined conditions. A standard test specimen is defined, but parameters are included for alternative specimen sizes for use where appropriate. A range of test speeds is included.
The method is used to investigate the flexural behaviour of the test specimens and to determine the flexural strength, flexural modulus and other aspects of the flexural stress/strain rela Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 178:2010/Amd 1:2013 - **Identifier:** ISO 178:2010/Amd 1:2013 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of flexural properties — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 178:2019 - **Withdrawn / published date:** 2013-04-05 _(verified: appears in the quote below)_ > 60778,IS,Amd,ISO 178:2010/Amd 1:2013,Plastics — Determination of flexural properties — Amendment 1,Plastiques — Détermination des propriétés en flexion — Amendement 1,2013-04-05,5,['83.080.01'],ISO/TC 61/SC 2,9599,,[70513],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1780:1975 - **Identifier:** ISO 1780:1975 _(verified: appears in the quote below)_ - **Item title:** Cinematography — Motion-picture camera cartridge, 8 mm Type S, Model I — Aperture opening, pressure pad and film load — Positions and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1780:1984 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 6412,IS,,ISO 1780:1975,"Cinematography — Motion-picture camera cartridge, 8 mm Type S, Model I — Aperture opening, pressure pad and film load — Positions and dimensions","Cinématographie — Chargeur modèle I pour caméra 8 mm type S — Fenêtre, presseur et chargement du film — Positions et dimensions",1975-12-01,1,['37.060.20'],ISO/TC 36,9599,,[6413],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17804:2005 - **Identifier:** ISO 17804:2005 _(verified: appears in the quote below)_ - **Item title:** Founding — Ausferritic spheroidal graphite cast irons — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17804:2020 - **Withdrawn / published date:** 2005-11-10 _(verified: appears in the quote below)_ > 33244,IS,,ISO 17804:2005,Founding — Ausferritic spheroidal graphite cast irons — Classification,Fonderie — Fonte ausferritique à graphite sphéroïdal — Classification,2005-11-10,1,['77.080.10'],ISO/TC 25,9599,,[67754],"['en','fr']",30,"
ISO 17804:2005 defines the grades and the corresponding requirements for ausferritic spheroidal graphite cast irons.
ISO 17804:2005 specifies five grades of ausferritic spheroidal graphite cast iron by a classification based on mechanical properties measured on machined test pieces prepared from separately cast samples or cast-on samples, and samples cut from a casting.
ISO 17804:2005 also specifies two grades by a classification as a function of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17827-1:2016 - **Identifier:** ISO 17827-1:2016 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17827-1:2024 - **Withdrawn / published date:** 2016-03-08 _(verified: appears in the quote below)_ > 60685,IS,,ISO 17827-1:2016,"Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above","Biocombustibles solides — Détermination de la distribution granulométrique des combustibles non comprimés — Partie 1: Méthode au tamis oscillant d'ouverture de maille égale ou supérieure à 3,15 mm",2016-03-08,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[85081],"['en','fr']",9,"
ISO 17827-1:2016 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top si Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17827-2:2016 - **Identifier:** ISO 17827-2:2016 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17827-2:2024 - **Withdrawn / published date:** 2016-05-10 _(verified: appears in the quote below)_ > 60688,IS,,ISO 17827-2:2016,"Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below","Biocombustibles solides — Détermination de la distribution granulométrique des combustibles non comprimés — Partie 2: Méthode au tamis vibrant d'ouverture de maille inférieure ou égale à 3,15 mm",2016-05-10,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[85082],"['en','fr']",10,"
ISO 17827-2:2016 specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely, materials that e Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17828:2015 - **Identifier:** ISO 17828:2015 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Determination of bulk density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17828:2025 - **Withdrawn / published date:** 2015-12-10 _(verified: appears in the quote below)_ > 60687,IS,,ISO 17828:2015,Solid biofuels — Determination of bulk density,Biocombustibles solides — Détermination de la masse volumique apparente,2015-12-10,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[84596],"['en','fr']",8,"
ISO 17828:2015 defines a method of determining bulk density of solid biofuels by the use of a standard measuring container. This method is applicable to all pourable solid biofuels with a nominal top size of maximum 100 mm.
Bulk density is not an absolute value; therefore, conditions for its determination have to be standardized in order to gain comparative measuring results.
NOTE Bulk density of solid biofuels is subject to variation due to severa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17829:2015 - **Identifier:** ISO 17829:2015 _(verified: appears in the quote below)_ - **Item title:** Solid Biofuels — Determination of length and diameter of pellets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17829:2025 - **Withdrawn / published date:** 2015-10-15 _(verified: appears in the quote below)_ > 60693,IS,,ISO 17829:2015,Solid Biofuels — Determination of length and diameter of pellets,Biocombustibles solides — Détermination de la longueur et du diamètre des granulés,2015-10-15,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[83456],"['en','fr']",4,
ISO 17829:2015 specifies the methods for the determination of diameter and length of pellets. Concerning the pellet length methods for both determination of the proportion of oversized pellets and for determination of the average length are included.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17830:2016 - **Identifier:** ISO 17830:2016 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Particle size distribution of disintegrated pellets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17830:2024 - **Withdrawn / published date:** 2016-03-08 _(verified: appears in the quote below)_ > 60694,IS,,ISO 17830:2016,Solid biofuels — Particle size distribution of disintegrated pellets,Biocombustibles solides — Détermination de la distribution granulométrique des granulés désintégrés,2016-03-08,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[85083],"['en','fr']",8,ISO 17830:2016 aims to define the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17831-1:2015 - **Identifier:** ISO 17831-1:2015 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17831-1:2025 - **Withdrawn / published date:** 2015-12-04 _(verified: appears in the quote below)_ > 60695,IS,,ISO 17831-1:2015,Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets,Biocombustibles solides — Détermination de la résistance mécanique des granulés et des briquettes — Partie 1: Granulés,2015-12-04,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[87613],"['en','fr']",7,ISO 17831-1:2015 defines a determination method for testing the mechanical durability of pellets. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as a consequence of handling and transportation.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17831-2:2015 - **Identifier:** ISO 17831-2:2015 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 2: Briquettes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17831-2:2025 - **Withdrawn / published date:** 2015-12-04 _(verified: appears in the quote below)_ > 60696,IS,,ISO 17831-2:2015,Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 2: Briquettes,Biocombustibles solides — Détermination de la résistance mécanique des granulés et des briquettes — Partie 2: Briquettes,2015-12-04,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[87614],"['en','fr']",6,ISO 17831-2:2015 defines a method for determining the mechanical durability of briquettes. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as a consequence of handling and transportation.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17832:2009 - **Identifier:** ISO 17832:2009 _(verified: appears in the quote below)_ - **Item title:** Non-parallel steel wire and cords for tyre reinforcement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17832:2018 - **Withdrawn / published date:** 2009-06-12 _(verified: appears in the quote below)_ > 38499,IS,,ISO 17832:2009,Non-parallel steel wire and cords for tyre reinforcement,Fils d'acier et cordes non parallèles pour le renfort de pneumatiques,2009-06-12,1,"['77.140.65','83.160.01']",ISO/TC 17/SC 17,9599,,[69351],"['en','ru']",13,ISO 17832:2009 specifies the definition and requirements of unparalleled steel wire and cords for tyre reinforcement.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17836:2004 - **Identifier:** ISO 17836:2004 _(verified: appears in the quote below)_ - **Item title:** Thermal spraying — Determination of the deposition efficiency for thermal spraying _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17836:2017 - **Withdrawn / published date:** 2004-10-26 _(verified: appears in the quote below)_ > 31572,IS,,ISO 17836:2004,Thermal spraying — Determination of the deposition efficiency for thermal spraying,Projection thermique — Détermination du rendement de dépôt en projection thermique,2004-10-26,1,['25.220.20'],ISO/TC 107,9599,,[69754],"['en','fr']",8,"ISO 17836:2004 defines the procedure for determining the deposition efficiency for a thermal spray process in connection with a spray material and related equipment and auxiliary materials. It is applicable for all thermal spray processes and all wire, rod, cord and powder spray materials.
It is essential to apply this International Standard if data concerning the deposition efficiency of a spray process in connection with a d Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17840-1:2015 - **Identifier:** ISO 17840-1:2015 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Information for first and second responders — Part 1: Rescue sheet for passenger cars and light commercial vehicles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17840-1:2022 - **Withdrawn / published date:** 2015-08-05 _(verified: appears in the quote below)_ > 67246,IS,,ISO 17840-1:2015,Road vehicles — Information for first and second responders — Part 1: Rescue sheet for passenger cars and light commercial vehicles,Véhicules routiers — Information pour les premiers et seconds intervenants — Partie 1: Fiche de secours pour véhicules particuliers et pour véhicules utilitaires légers,2015-08-05,1,['43.020'],ISO/TC 22/SC 36,9599,,[78461],"['en','fr']",21,"
ISO 17840-1:2015 defines the content and the layout of the rescue sheet providing necessary and useful information about a vehicle involved in an accident to support the rescue team extricating the occupants as fast and as safe as possible. The contents and layout takes into account that the resc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17842-1:2015 - **Identifier:** ISO 17842-1:2015 _(verified: appears in the quote below)_ - **Item title:** Safety of amusement rides and amusement devices — Part 1: Design and manufacture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17842-1:2023 - **Withdrawn / published date:** 2015-06-24 _(verified: appears in the quote below)_ > 60814,IS,,ISO 17842-1:2015,Safety of amusement rides and amusement devices — Part 1: Design and manufacture,Sécurité des manèges et des dispositifs de divertissement — Partie 1: Conception et fabrication,2015-06-24,1,['97.200.40'],ISO/TC 254,9599,,[73000],['en'],158,"
ISO 17842-1:2015 specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of the following: mobile, temporary or permanently installed machinery and structures, e.g. roundabouts, swings, boats, Ferris wheels, roller coasters, chutes, grandstands, membrane or textile structures, booths, stages, side shows, and structures for artistic aerial displays. These amusement dev Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 62](https://referencesource.org/iso-standard-supersessions/p/62/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 64](https://referencesource.org/iso-standard-supersessions/p/64/) Last verified: 2026-08-05. Review by: 2027-02-02.