ISO 16946:2015 specifies the dimensions, material, and manufacture of a step wedge steel block for the calibration of ultrasonic instruments.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16946:2017 - **Identifier:** ISO 16946:2017 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16946:2024 - **Withdrawn / published date:** 2017-03-02 _(verified: appears in the quote below)_ > 71694,IS,,ISO 16946:2017,Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block,Essais non destructifs — Essais par ultrasons — Spécifications relatives aux blocs d'étalonnage à gradins,2017-03-02,2,['19.100'],ISO/TC 135/SC 3,9599,[57998],[85805],"['en','fr']",4,"ISO 16946:2017 specifies the dimensions, material, and manufacture of a step wedge steel block for the calibration of ultrasonic instruments.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16958:2015 - **Identifier:** ISO 16958:2015 _(verified: appears in the quote below)_ - **Item title:** Milk, milk products, infant formula and adult nutritionals — Determination of fatty acids composition — Capillary gas chromatographic method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16958:2026 | ISO/DIS 16958 - **Withdrawn / published date:** 2015-11-09 _(verified: appears in the quote below)_ > 63618,IS,,ISO 16958:2015,"Milk, milk products, infant formula and adult nutritionals — Determination of fatty acids composition — Capillary gas chromatographic method","Lait, produits laitiers, formules infantiles et produits nutritionnels pour adultes — Détermination de la composition en acides gras — Méthode de chromatographie en phase gazeuse sur colonne capillaire",2015-11-09,1,['67.100.10'],ISO/TC 34/SC 5,9599,,"[91687,83129]","['en','fr']",45,"ISO 16958:2015 specifies a method for the quantification of individual and/or all fatty acids in the profile of milk, milk products, infant formula and adult nutritional formula, containing milk fat and/or vegetable oils, supplemented or not s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16961:2015 - **Identifier:** ISO 16961:2015 _(verified: appears in the quote below)_ - **Item title:** Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16961:2024 - **Withdrawn / published date:** 2015-07-16 _(verified: appears in the quote below)_ > 58037,IS,,ISO 16961:2015,"Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks","Industries du pétrole, de la pétrochimie et du gaz naturel — Revêtement intérieur et doublage interne des réservoirs de stockage en acier",2015-07-16,1,['75.200'],ISO/TC 67,9599,,[80034],"['en','fr']",38,"
ISO 16961:2015 specifies the minimum requirements for surface preparation, materials, application, inspection and testing of internal coating lining systems that are intended to be applied on internal surfaces of steel storage tanks of crude oil, hydrocarbons and water for corrosion protection.
It covers both new construction and maintenance works of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16962:2005 - **Identifier:** ISO 16962:2005 _(verified: appears in the quote below)_ - **Item title:** Surface chemical analysis — Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 16962 | ISO 16962:2017 - **Withdrawn / published date:** 2005-10-12 _(verified: appears in the quote below)_ > 31145,IS,,ISO 16962:2005,Surface chemical analysis — Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry,Analyse chimique des surfaces — Analyse des revêtements métalliques à base de zinc et/ou d'aluminium par spectrométrie d'émission optique à décharge luminescente,2005-10-12,1,['71.040.40'],ISO/TC 201/SC 8,9599,,"[45772,66295]",['en'],32,"
ISO 16962:2005 specifies a glow discharge optical emission spectrometric method for the determination of the thickness, mass per unit area and chemical composition of metallic surface coatings consisting of zinc- and/or aluminium-based materials. The alloying elements considered are nickel, iron, s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16964:2015 - **Identifier:** ISO 16964:2015 _(verified: appears in the quote below)_ - **Item title:** Gas cylinders — Flexible hoses assemblies — Specification and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16964:2019 - **Withdrawn / published date:** 2015-09-18 _(verified: appears in the quote below)_ > 58054,IS,,ISO 16964:2015,Gas cylinders — Flexible hoses assemblies — Specification and testing,Bouteilles à gaz — Flexibles — Spécifications et essais,2015-09-18,1,"['23.020.35','83.140.40']",ISO/TC 58/SC 2,9599,,[74016],['en'],13,"
ISO 16964:2015 provides specification and testing requirements for high pressure flexible hose assemblies intended to be connected to gas cylinders, bundles of cylinders or trailers for use when filling and emptying gas at production sites and also for customer use. This International Standard applies to flexible hose assemblies with rated pressures up to 1 000 bar for use in the temperature range of −40° C to +65° C.
This International Standard is not ap Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16971:2015 - **Identifier:** ISO 16971:2015 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16971-1:2024 - **Withdrawn / published date:** 2015-04-15 _(verified: appears in the quote below)_ > 58076,IS,,ISO 16971:2015,Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye,Instruments ophtalmiques — Tomographe à cohérence optique du segment postérieur de l'oeil humain,2015-04-15,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[83360],"['en','fr']",9,"
ISO 16971:2015 is applicable to optical coherence tomography (OCT) instruments, systems, and methods that are intended to image and measure the biological tissue of the posterior segment of the human eye.
ISO 16971:2015 defines certain terms that are specific to this diagnostic procedure.
ISO 16971:2015 specifies minimum requirements for OCT instruments and systems. It specifies tests and p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16972:2010 - **Identifier:** ISO 16972:2010 _(verified: appears in the quote below)_ - **Item title:** Respiratory protective devices — Terms, definitions, graphical symbols and units of measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16972:2020 - **Withdrawn / published date:** 2010-03-08 _(verified: appears in the quote below)_ > 38180,IS,,ISO 16972:2010,"Respiratory protective devices — Terms, definitions, graphical symbols and units of measurement","Appareils de protection respiratoire — Termes, définitions, symboles graphiques et unités de mesure",2010-03-08,1,"['13.340.30','01.040.13']",ISO/TC 94/SC 15,9599,,[68425],"['en','fr']",37,"
ISO 16972:2010 is applicable to respiratory protective devices. It defines commonly used terms and specifies units of measurement to achieve a uniform interpretation and to prevent ambiguous use. It indicates graphical symbols that may be required to be placed on respiratory protective devices (RPD) or parts of RPD or instruction manuals, in order to instruct the person(s) using t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16992:2006 - **Identifier:** ISO 16992:2006 _(verified: appears in the quote below)_ - **Item title:** Passenger car tyres — Spare unit substitutive equipment (SUSE) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16992:2010 - **Withdrawn / published date:** 2006-06-14 _(verified: appears in the quote below)_ > 38189,IS,,ISO 16992:2006,Passenger car tyres — Spare unit substitutive equipment (SUSE),Pneumatiques pour voitures particulières — Équipements de substitution de roue de secours (SUSE),2006-06-14,1,"['43.020','83.160.10']",ISO/TC 31/SC 3,9599,,[52162],"['en','fr']",8,"
ISO 16992:2006 describes spare unit substitutive equipment (SUSE) for passenger car tyres. This equipment is designed to allow the user to continue on the journey (with or without a stop) in a reasonably safe manner.
ISO 16992:2006 only aims to qualify the performance of extended mobility systems. It details specifications only for extended mobility systems suitable to permit the extended mobility of the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16992:2010 - **Identifier:** ISO 16992:2010 _(verified: appears in the quote below)_ - **Item title:** Passenger car tyres — Spare unit substitutive equipment (SUSE) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16992:2018 - **Withdrawn / published date:** 2010-03-01 _(verified: appears in the quote below)_ > 52162,IS,,ISO 16992:2010,Passenger car tyres — Spare unit substitutive equipment (SUSE),Pneumatiques pour voitures particulières — Équipements de substitution de roue de secours (SUSE),2010-03-01,2,"['43.020','83.160.10']",ISO/TC 31/SC 3,9599,[38189],[69687],"['en','fr']",10,"
ISO 16992:2010 describes spare unit substitutive equipment (SUSE) for passenger car tyres, which is designed to enable users to continue their journey (with or without a stop) in a reasonably safe manner.
ISO 16992:2010 is intended only to qualify the performance of extended mobility systems. Its specifications only apply to extended mobility systems that can permit the extended mobility of the vehicle.
T Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16993:2015 - **Identifier:** ISO 16993:2015 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Conversion of analytical results from one basis to another _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16993:2016 - **Withdrawn / published date:** 2015-03-25 _(verified: appears in the quote below)_ > 58081,IS,,ISO 16993:2015,Solid biofuels — Conversion of analytical results from one basis to another,Biocombustibles solides - Conversion de résultats analytiques d'une base en une autre base,2015-03-25,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[70098],"['en','fr']",11,
ISO 16993:2015 gives formulae which allow analytical data relating to solid biofuels to be expressed on the different bases in common use. Consideration is given to corrections that can be applied to certain determined values for solid biofuels prior to their calculation to other bases.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16994:2015 - **Identifier:** ISO 16994:2015 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Determination of total content of sulfur and chlorine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16994:2016 - **Withdrawn / published date:** 2015-03-25 _(verified: appears in the quote below)_ > 58082,IS,,ISO 16994:2015,Solid biofuels — Determination of total content of sulfur and chlorine,Biocombustibles solides — Détermination de la teneur totale en soufre et en chlore,2015-03-25,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[70097],"['en','fr']",11,"ISO 16994:2015 describes methods for the determination of the total sulfur and total chlorine content in solid biofuels. ISO 16994:2015 specifies two methods for decomposition of the fuel and different analytical techniques for the quantification of the elements in the decomposition solutions. The use of automatic equipment is also included in ISO 16994:2015, provided that a validation is carried out as specified and that the perform Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16994:2016 - **Identifier:** ISO 16994:2016 _(verified: appears in the quote below)_ - **Item title:** Solid biofuels — Determination of total content of sulfur and chlorine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 16994 | ISO 16994:2026 - **Withdrawn / published date:** 2016-06-27 _(verified: appears in the quote below)_ > 70097,IS,,ISO 16994:2016,Solid biofuels — Determination of total content of sulfur and chlorine,Biocombustibles solides — Détermination de la teneur totale en soufre et en chlore,2016-06-27,2,"['27.190','75.160.40']",ISO/TC 238,9599,[58082],"[75841,89129]","['en','fr']",11,"
ISO 16994:2016 describes methods for the determination of the total sulfur and total chlorine content in solid biofuels. It specifies two methods for decomposition of the fuel and different analytical techniques for the quantification of the elements in the decomposition solutions. The use of automatic equipment is also included in ISO 16994:2016, provided that a validation is carried out as specified and that the perf Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1700:1981 - **Identifier:** ISO 1700:1981 _(verified: appears in the quote below)_ - **Item title:** Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1700:1988 - **Withdrawn / published date:** 1981-04-01 _(verified: appears in the quote below)_ > 6316,IS,,ISO 1700:1981,Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions,"Cinématographie — Film 8 mm perforé, type S, vierge — Dimensions de coupe et de perforation",1981-04-01,2,['37.060.20'],ISO/TC 36,9599,,[6317],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1701-0:1984 - **Identifier:** ISO 1701-0:1984 _(verified: appears in the quote below)_ - **Item title:** Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Part 0: General introduction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1701-1:2004 | ISO 1701-2:2004 | ISO/WD 1701-0 - **Withdrawn / published date:** 1984-05-01 _(verified: appears in the quote below)_ > 6322,IS,,ISO 1701-0:1984,"Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Part 0: General introduction","Conditions de réception des machines à fraiser à table à hauteur variable, à broche horizontale ou verticale — Partie 0: Introduction générale",1984-05-01,1,['25.080.20'],ISO/TC 39/SC 2,9599,,"[37682,37683,36700]","['en','fr']",8,"
Defines the machining processes that can be carried out on these milling machines, and describes the different types of machines. This part also gives a nomenclature for the main elements of the machine (in English, French and Russian as well as equivalent terms in German, Italian, Dutch, Spanish and S Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1701:1974 - **Identifier:** ISO 1701:1974 _(verified: appears in the quote below)_ - **Item title:** Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1701-2:1997 | ISO 1701-3:1997 - **Withdrawn / published date:** 1974-12-01 _(verified: appears in the quote below)_ > 6318,IS,,ISO 1701:1974,"Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy","Conditions d'essais des machines à fraiser à table de hauteur variable, à broche horizontale ou verticale — Contrôle de la précision",1974-12-01,1,['25.080.20'],ISO/TC 39/SC 2,9599,,"[25060,25061]","['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1701:1974/Amd 1:1979 - **Identifier:** ISO 1701:1974/Amd 1:1979 _(verified: appears in the quote below)_ - **Item title:** Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1701-2:1997 | ISO 1701-3:1997 - **Withdrawn / published date:** 1979-06-01 _(verified: appears in the quote below)_ > 6321,IS,Amd,ISO 1701:1974/Amd 1:1979,"Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy — Amendment 1","Conditions d'essais des machines à fraiser à table de hauteur variable, à broche horizontale ou verticale — Contrôle de la précision — Amendement 1",1979-06-01,1,['25.080.20'],ISO/TC 39,9599,,"[25060,25061]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1701-2:1997 - **Identifier:** ISO 1701-2:1997 _(verified: appears in the quote below)_ - **Item title:** Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 2: Machines with horizontal spindle _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1701-1:2004 | ISO 1701-2:2004 - **Withdrawn / published date:** 1997-07-17 _(verified: appears in the quote below)_ > 25060,IS,,ISO 1701-2:1997,Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 2: Machines with horizontal spindle,Conditions d'essai des machines à fraiser à table de hauteur variable — Contrôle de la précision — Partie 2: Machines à broche horizontale,1997-07-17,1,['25.080.20'],ISO/TC 39/SC 2,9599,"[6321,6318]","[37682,37683]","['en','fr']",22, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1701-3:1997 - **Identifier:** ISO 1701-3:1997 _(verified: appears in the quote below)_ - **Item title:** Test conditions for milling machines with table of variable height — Testing of accuracy — Part 3: Machines with vertical spindle _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1701-1:2004 | ISO 1701-2:2004 - **Withdrawn / published date:** 1997-12-25 _(verified: appears in the quote below)_ > 25061,IS,,ISO 1701-3:1997,Test conditions for milling machines with table of variable height — Testing of accuracy — Part 3: Machines with vertical spindle,Conditions d'essai des machines à fraiser à table de hauteur variable — Contrôle de la précision — Partie 3: Machines à broche verticale,1997-12-25,1,['25.080.20'],ISO/TC 39/SC 2,9599,"[6321,6318]","[37682,37683]","['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1703:1983 - **Identifier:** ISO 1703:1983 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Nomenclature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1703:2005 | ISO/CD 1703 - **Withdrawn / published date:** 1983-02-01 _(verified: appears in the quote below)_ > 6323,IS,,ISO 1703:1983,Assembly tools for screws and nuts — Nomenclature,Outils de manoeuvre pour vis et écrous — Nomenclature,1983-02-01,2,"['25.140.01','01.040.25']",ISO/TC 29/SC 10,9599,,"[38458,26666]","['en','fr','ru']",33, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1703:2005 - **Identifier:** ISO 1703:2005 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Designation and nomenclature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1703:2018 - **Withdrawn / published date:** 2005-07-18 _(verified: appears in the quote below)_ > 38458,IS,,ISO 1703:2005,Assembly tools for screws and nuts — Designation and nomenclature,Outils de manoeuvre pour vis et écrous — Désignation et nomenclature,2005-07-18,3,"['25.140.01','01.040.25']",ISO/TC 29/SC 10,9599,[6323],[69308],"['en','fr','ru']",40,
ISO 1703:2005 gives a nomenclature in English and French of assembly tools for screws and nuts.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1704:1973 - **Identifier:** ISO 1704:1973 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Anchor chains _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1704:1991 - **Withdrawn / published date:** 1973-04-01 _(verified: appears in the quote below)_ > 6324,IS,,ISO 1704:1973,Shipbuilding — Anchor chains,Construction navale — Chaînes d'ancres,1973-04-01,1,['47.020.50'],ISO/TC 8,9599,"[4298,3671,3672,4004]",[6325],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1704:1991 - **Identifier:** ISO 1704:1991 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Stud-link anchor chains _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1704:2008 - **Withdrawn / published date:** 1991-10-24 _(verified: appears in the quote below)_ > 6325,IS,,ISO 1704:1991,Shipbuilding — Stud-link anchor chains,Construction navale — Chaînes d'ancre à mailles étançonnées,1991-10-24,2,['47.020.50'],ISO/TC 8/SC 4,9599,[6324],[37151],"['en','fr']",12,"Specifies the shape, proportions, dimensions and tolerances of the component parts of new chains. This second edition cancels and replaces the first edition (1973).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1704:2008 - **Identifier:** ISO 1704:2008 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Stud-link anchor chains _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1704:2022 - **Withdrawn / published date:** 2008-02-20 _(verified: appears in the quote below)_ > 37151,IS,,ISO 1704:2008,Ships and marine technology — Stud-link anchor chains,Navires et technologie maritime — Chaînes d'ancre à mailles étançonnées,2008-02-20,3,['47.020.50'],ISO/TC 8/SC 4,9599,[6325],[77746],['en'],23,"ISO 1704:2008 specifies the shape, proportions, dimensions and tolerances of the component parts of stud-link anchor chains.
Any statutory requirements, rules and regulations applicable to the individual ship concerned also apply.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17059:2007 - **Identifier:** ISO 17059:2007 _(verified: appears in the quote below)_ - **Item title:** Oilseeds — Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17059:2019 - **Withdrawn / published date:** 2007-06-28 _(verified: appears in the quote below)_ > 38061,IS,,ISO 17059:2007,Oilseeds — Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method),Graines oléagineuses — Extraction de l'huile et préparation des esters méthyliques d'acides gras de triglycérides pour analyse par chromatographie en phase gazeuse (Méthode rapide),2007-06-28,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[74350],"['en','fr']",5,"ISO 17059:2007 specifies a rapid method for extraction of oil and for preparation of the methyl esters of fatty acids. The methyl esters thus obtained can be used for gas chromatography.
ISO 17059:2007 is applicable to the following oilseeds: rape, sunflower, soya beans, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17064:2004 - **Identifier:** ISO 17064:2004 _(verified: appears in the quote below)_ - **Item title:** Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17064:2016 - **Withdrawn / published date:** 2004-02-24 _(verified: appears in the quote below)_ > 32849,IS,,ISO 17064:2004,"Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary","Panneaux à base de bois — Panneaux de fibres, de particules et de particules orientées — Vocabulaire",2004-02-24,1,['79.060.20'],ISO/TC 89/SC 1,9599,,[66407],['en'],2,"
ISO 17064:2004 provides definitions and terminology applying to all types of fibreboard, particleboard and oriented strand board (OSB).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17069:2014 - **Identifier:** ISO 17069:2014 _(verified: appears in the quote below)_ - **Item title:** Accessible design — Consideration and assistive products for accessible meeting _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17069:2020 - **Withdrawn / published date:** 2014-10-20 _(verified: appears in the quote below)_ > 58090,IS,,ISO 17069:2014,Accessible design — Consideration and assistive products for accessible meeting,Conception accessible — Considérations et produits d'assistance pour réunion accessible,2014-10-20,1,"['13.180','11.180.01']",ISO/TC 173/SC 7,9599,,[81086],['en'],17,"ISO 17069:2014 specifies considerations to be taken, as well as support and assistive products that can be used when organizing a physical meeting in which older persons and persons with disabilities can actively participate.
Teleconferences and web conferences are important methods that can be used to include older persons and persons with disabilities in meetings.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17070:2006 - **Identifier:** ISO 17070:2006 _(verified: appears in the quote below)_ - **Item title:** Leather — Chemical tests — Determination of pentachlorophenol content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17070:2015 - **Withdrawn / published date:** 2006-09-29 _(verified: appears in the quote below)_ > 38201,IS,,ISO 17070:2006,Leather — Chemical tests — Determination of pentachlorophenol content,Cuir — Essais chimiques — Détermination de la teneur en pentachlorophénol,2006-09-29,1,['59.140.30'],IULTCS,9599,,[59152],"['en','fr']",6,"ISO 17070:2006 specifies a method for determining the content of pentachlorophenol (PCP), its salts and esters in leather.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17072-1:2011 - **Identifier:** ISO 17072-1:2011 _(verified: appears in the quote below)_ - **Item title:** Leather — Chemical determination of metal content — Part 1: Extractable metals _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17072-1:2019 - **Withdrawn / published date:** 2011-01-31 _(verified: appears in the quote below)_ > 38195,IS,,ISO 17072-1:2011,Leather — Chemical determination of metal content — Part 1: Extractable metals,Cuir — Détermination chimique de la teneur en métal — Partie 1: Métaux extractibles,2011-01-31,1,['59.140.30'],IULTCS,9599,,[73706],"['en','fr']",8,"ISO 17072-1:2011 specifies a method for the determination of extractable metals in leather using extraction with an acid artificial-perspiration solution and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP-OES), or inductively coupled plasma/atomic emission spectrometry (ICP/AES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17072-2:2011 - **Identifier:** ISO 17072-2:2011 _(verified: appears in the quote below)_ - **Item title:** Leather — Chemical determination of metal content — Part 2: Total metal content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17072-2:2019 - **Withdrawn / published date:** 2011-01-31 _(verified: appears in the quote below)_ > 51507,IS,,ISO 17072-2:2011,Leather — Chemical determination of metal content — Part 2: Total metal content,Cuir — Détermination chimique de la teneur en métal — Partie 2: Teneur totale en métaux,2011-01-31,1,['59.140.30'],IULTCS,9599,,[73707],"['en','fr']",7,"
ISO 17072-2:2011 specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP/OES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA).
This method determines the total metal content in leather; Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17072-2:2019 - **Identifier:** ISO 17072-2:2019 _(verified: appears in the quote below)_ - **Item title:** Leather — Chemical determination of metal content — Part 2: Total metal content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17072-2:2022 - **Withdrawn / published date:** 2019-02-28 _(verified: appears in the quote below)_ > 73707,IS,,ISO 17072-2:2019,Leather — Chemical determination of metal content — Part 2: Total metal content,Cuir — Détermination chimique de la teneur en métal — Partie 2: Teneur totale en métaux,2019-02-28,2,['59.140.30'],IULTCS,9599,[51507],[83412],"['en','fr']",8,"
This document specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA).
This method determines the total metal content in leather; i Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17075:2007 - **Identifier:** ISO 17075:2007 _(verified: appears in the quote below)_ - **Item title:** Leather — Chemical tests — Determination of chromium(VI) content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17075-1:2017 | ISO 17075-2:2017 - **Withdrawn / published date:** 2007-11-19 _(verified: appears in the quote below)_ > 38198,IS,,ISO 17075:2007,Leather — Chemical tests — Determination of chromium(VI) content,Cuir — Essais chimiques — Détermination de la teneur en chrome(VI),2007-11-19,1,['59.140.30'],IULTCS,9599,,"[67096,67097]","['en','fr']",9,
ISO 17075:2007 specifies a method for determining chromium(VI) in solutions leached from leather under defined conditions. The method described is suitable to quantify the chromium(VI) content in leathers down to 3 mg/kg.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17076-1:2012 - **Identifier:** ISO 17076-1:2012 _(verified: appears in the quote below)_ - **Item title:** Leather — Determination of abrasion resistance — Part 1: Taber method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17076-1:2020 - **Withdrawn / published date:** 2012-03-08 _(verified: appears in the quote below)_ > 54452,IS,,ISO 17076-1:2012,Leather — Determination of abrasion resistance — Part 1: Taber method,Cuir — Détermination de la résistance à l'abrasion — Partie 1: Méthode Taber,2012-03-08,1,['59.140.30'],IULTCS,9599,[41472],[75175],"['en','fr']",5,ISO 17076-1:2012 specifies a method of determining the abrasion resistance of leather using a Taber apparatus.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17076:2006 - **Identifier:** ISO 17076:2006 _(verified: appears in the quote below)_ - **Item title:** Leather — Physical and mechanical tests — Determination of abrasion resistance of automotive leather _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17076-1:2012 - **Withdrawn / published date:** 2006-09-12 _(verified: appears in the quote below)_ > 41472,IS,,ISO 17076:2006,Leather — Physical and mechanical tests — Determination of abrasion resistance of automotive leather,Cuir — Essais physiques et mécaniques — Détermination de la résistance à l'abrasion du cuir pour l'automobile,2006-09-12,1,['59.140.30'],IULTCS,9599,,[54452],"['en','fr']",5,ISO 17076:2006 specifies a method of determining the abrasion resistance of automotive leather.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1708:1983 - **Identifier:** ISO 1708:1983 _(verified: appears in the quote below)_ - **Item title:** Acceptance conditions for general purpose parallel lathes — Testing of the accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1708:1989 - **Withdrawn / published date:** 1983-06-01 _(verified: appears in the quote below)_ > 6327,IS,,ISO 1708:1983,Acceptance conditions for general purpose parallel lathes — Testing of the accuracy,Conditions de réception des tours parallèles d'usage général — Contrôle de la précision,1983-06-01,3,['25.080.10'],ISO/TC 39/SC 2,9599,,[6328],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17081:2004 - **Identifier:** ISO 17081:2004 _(verified: appears in the quote below)_ - **Item title:** Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17081:2014 - **Withdrawn / published date:** 2004-11-12 _(verified: appears in the quote below)_ > 40480,IS,,ISO 17081:2004,Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique,Méthode de mesure de la perméation de l'hydrogène et détermination de l'absorption d'hydrogène et de son transport dans les métaux à l'aide d'une technique électrochimique,2004-11-12,1,['77.060'],ISO/TC 156,9599,,[64514],"['en','fr']",16,"ISO 17081:2004 specifies a laboratory method for the measurement of hydrogen permeation and for the determination of hydrogen atom uptake and transport in metals, using an electrochemical technique. The term 'metal' as used in this International Standard includes alloys.
This Internationa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17088:2008 - **Identifier:** ISO 17088:2008 _(verified: appears in the quote below)_ - **Item title:** Specifications for compostable plastics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17088:2012 - **Withdrawn / published date:** 2008-02-20 _(verified: appears in the quote below)_ > 43373,IS,,ISO 17088:2008,Specifications for compostable plastics,Spécifications pour les plastiques compostables,2008-02-20,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[57901],"['en','fr']",8,"
ISO 17088:2008 specifies procedures and requirements for the identification and labelling of plastics, and products made from plastics, that are suitable for recovery through aerobic composting. The four following aspects are addressed:
This International Standard specifies procedures and requirements for the identification and labelling of
plastics, and products made from plastics, that are suitable for recovery through aerobic composting. The four
following aspects are addressed:
a) biodegradation;
b) disintegration during composting;
c) negative effects on the composting process and facility;
d) negative effects on the quality of the resulting compost, including the presence of high levels of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17089-1:2010 - **Identifier:** ISO 17089-1:2010 _(verified: appears in the quote below)_ - **Item title:** Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17089-1:2019 - **Withdrawn / published date:** 2010-11-11 _(verified: appears in the quote below)_ > 41235,IS,,ISO 17089-1:2010,Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement,Mesurage du débit des fluides dans les conduites fermées — Compteurs à ultrasons pour gaz — Partie 1: Compteurs pour transactions commerciales et allocations,2010-11-11,1,['17.120.10'],ISO/TC 30/SC 5,9599,,[68342],"['en','fr']",100,"
ISO 17089-1:2010 specifies requirements and recommendations for ultrasonic gas flowmeters (USMs), which utilize the transit time of acoustic signals to measure the flow of single phase homogenous gases in closed conduits.
ISO 17089-1:2010 applies to transit time ultrasonic gas flowmeters used Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1709:1975 - **Identifier:** ISO 1709:1975 _(verified: appears in the quote below)_ - **Item title:** Nuclear energy — Fissile materials — Principles of criticality safety in handling and processing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1709:1995 - **Withdrawn / published date:** 1975-10-01 _(verified: appears in the quote below)_ > 6329,IS,,ISO 1709:1975,Nuclear energy — Fissile materials — Principles of criticality safety in handling and processing,Énergie nucléaire — Matières fissiles — Principes de sécurité en matière de criticité lors de la manipulation et du traitement,1975-10-01,1,['27.120.30'],ISO/TC 85,9599,,[2514],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1709:1995 - **Identifier:** ISO 1709:1995 _(verified: appears in the quote below)_ - **Item title:** Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1709:2018 - **Withdrawn / published date:** 1995-10-19 _(verified: appears in the quote below)_ > 2514,IS,,ISO 1709:1995,"Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing","Énergie nucléaire — Matières fissiles — Principes de sécurité en matière de criticité lors du stockage, de la manipulation et du traitement",1995-10-19,2,['27.120.30'],ISO/TC 85/SC 5,9599,[6329],[68617],['en'],4,"
Specifies the basic principles and limitations which govern operations with fissile materials. Describes general criticality safety criteria for equipment design and for the development of operating controls. Does not cover quality assurance requirements or details of equipment or operational procedures, does not deal with the effects of radiation on Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17090-1:2008 - **Identifier:** ISO 17090-1:2008 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Public key infrastructure — Part 1: Overview of digital certificate services _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17090-1:2013 - **Withdrawn / published date:** 2008-02-14 _(verified: appears in the quote below)_ > 39845,IS,,ISO 17090-1:2008,Health informatics — Public key infrastructure — Part 1: Overview of digital certificate services,Informatique de santé — Infrastructure de clé publique — Partie 1: Vue d'ensemble des services de certificat numérique,2008-02-14,1,['35.240.80'],ISO/TC 215,9599,[35489],[63019],['en'],36,"
ISO 17090-1:2008 defines the basic concepts underlying use of digital certificates in healthcare and provides a scheme of interoperability requirements to establish a digital certificate-enabled secure communication of health information. It also identifies the major stakeholders who are communicating health-related information, as well as the main security services required for h Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17090-1:2013 - **Identifier:** ISO 17090-1:2013 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Public key infrastructure — Part 1: Overview of digital certificate services _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17090-1:2021 - **Withdrawn / published date:** 2013-05-06 _(verified: appears in the quote below)_ > 63019,IS,,ISO 17090-1:2013,Health informatics — Public key infrastructure — Part 1: Overview of digital certificate services,Informatique de santé — Infrastructure de clé publique — Partie 1: Vue d'ensemble des services de certificat numérique,2013-05-06,2,['35.240.80'],ISO/TC 215,9599,[39845],[81430],['en'],39,"
ISO 17090-1:2013 defines the basic concepts underlying the use of digital certificates in healthcare and provides a scheme of interoperability requirements to establish a digital certificate-enabled secure communication of health information. It also identifies the major stakeholders who are communicating health-related information, as well as the main security services required f Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17090-2:2008 - **Identifier:** ISO 17090-2:2008 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Public key infrastructure — Part 2: Certificate profile _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17090-2:2015 - **Withdrawn / published date:** 2008-02-14 _(verified: appears in the quote below)_ > 39846,IS,,ISO 17090-2:2008,Health informatics — Public key infrastructure — Part 2: Certificate profile,Informatique de santé — Infrastructure de clé publique — Partie 2: Profil de certificat,2008-02-14,1,['35.240.80'],ISO/TC 215,9599,[35490],[63020],['en'],27,"
ISO 17090-2:2008 specifies the certificate profiles required to interchange healthcare information within a single organization, between different organizations and across jurisdictional boundaries. It details the use made of digital certificates in the health industry and focuses, in particular, on specific healthcare issues relating to certificate profiles.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17090-3:2008 - **Identifier:** ISO 17090-3:2008 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Public key infrastructure — Part 3: Policy management of certification authority _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17090-3:2021 - **Withdrawn / published date:** 2008-02-14 _(verified: appears in the quote below)_ > 39847,IS,,ISO 17090-3:2008,Health informatics — Public key infrastructure — Part 3: Policy management of certification authority,Informatique de santé — Infrastructure de clé publique — Partie 3: Gestion politique d'autorité de certification,2008-02-14,1,['35.240.80'],ISO/TC 215,9599,[35491],[81431],['en'],36,"ISO 17090-3:2008 gives guidelines for certificate management issues involved in deploying digital certificates in healthcare. It specifies a structure and minimum requirements for certificate policies, as well as a structure for associated certification practice statements.
ISO 17090-3:2008 also identifies the principles needed in a healthcare security policy for cross-border Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17090-4:2014 - **Identifier:** ISO 17090-4:2014 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Public key infrastructure — Part 4: Digital Signatures for healthcare documents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17090-4:2020 - **Withdrawn / published date:** 2014-09-24 _(verified: appears in the quote below)_ > 61185,IS,,ISO 17090-4:2014,Health informatics — Public key infrastructure — Part 4: Digital Signatures for healthcare documents,Informatique de la santé — Infrastructure clé publique — Partie 4: Signatures numériques pour les documents des soins médicaux,2014-09-24,1,['35.240.80'],ISO/TC 215,9599,,[74357],['en'],24,"
ISO 17090-4:2014 supports interchangeability of digital signatures and the prevention of incorrect or illegal digital signatures by providing minimum requirements and formats for generating and verifying digital signatures and related certificates.
Furthermore, it defines the provable compliance with a PKI policy necessary in the domain of healthcare. This part of ISO 17 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17090-4:2020 - **Identifier:** ISO 17090-4:2020 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Public key infrastructure — Part 4: Digital signatures for healthcare documents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17090-4:2026 - **Withdrawn / published date:** 2020-10-07 _(verified: appears in the quote below)_ > 74357,IS,,ISO 17090-4:2020,Health informatics — Public key infrastructure — Part 4: Digital signatures for healthcare documents,Informatique de la santé — Infrastructure clé publique — Partie 4: Signatures numériques pour les documents des soins médicaux,2020-10-07,2,['35.240.80'],ISO/TC 215,9599,[61185],[86410],['en'],27,"
This document supports interchangeability of digital signatures and the prevention of incorrect or illegal digital signatures by providing minimum requirements and formats for generating and verifying digital signatures and related certificates.
This document describes the common technical, operational, and policy requirements that need to be addressed to enable d Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17099:2014 - **Identifier:** ISO 17099:2014 _(verified: appears in the quote below)_ - **Item title:** Radiological protection — Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17099:2024 - **Withdrawn / published date:** 2014-11-06 _(verified: appears in the quote below)_ > 59141,IS,,ISO 17099:2014,Radiological protection — Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry,Radioprotection — Critères de performance pour les laboratoires pratiquant la dosimétrie biologique par le test des micronoyaux avec blocage de la cytodiérèse (CBMN) dans les lymphocytes du sang périphérique,2014-11-06,1,['13.280'],ISO/TC 85/SC 2,9599,,[82312],"['en','fr']",31,"
ISO 17099:2014 addresses the following:
a) confidentiality of personal information for the customer and the laboratory;
b) laboratory safety requirements;
c) radiation sources, dose rates, an Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 171:1980 - **Identifier:** ISO 171:1980 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of bulk factor of moulding materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 171:2022 - **Withdrawn / published date:** 1980-05-01 _(verified: appears in the quote below)_ > 4005,IS,,ISO 171:1980,Plastics — Determination of bulk factor of moulding materials,Plastiques — Détermination du facteur de contraction des matières à mouler,1980-05-01,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[83907],"['en','fr']",1,"
Specifies a method of determining the bulk factor of a moulding material from its apparent density in the unmoulded form and its density in the moulded form. Knowledge of the bulk factor is of importance for the calculation of the minimum cavity volume in the design of moulds. The bulk factor is given by the quotient of the density of the material in the moulded form, determined according ISO 1183 and the apparent density of the material in the unmoulded form, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17101:2004 - **Identifier:** ISO 17101:2004 _(verified: appears in the quote below)_ - **Item title:** Agricultural machinery — Rotary and flail mowers — Thrown-object test and acceptance criteria _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17101-2:2012 | ISO 17101-1:2012 - **Withdrawn / published date:** 2004-05-14 _(verified: appears in the quote below)_ > 29039,IS,,ISO 17101:2004,Agricultural machinery — Rotary and flail mowers — Thrown-object test and acceptance criteria,Matériel agricole — Faucheuses rotatives et faucheuses-broyeuses — Essai de projection d'objets et critères d'acceptation,2004-05-14,1,"['65.060.50','65.060.70','65.060.01']",ISO/TC 23/SC 7,9599,,"[56207,57228]","['en','fr']",21,"
ISO 17101:2004 gives specifications and acceptance criteria for the thrown-object testing of rotary and flail mowers used in agriculture. It is not applicable to mowers with an articulated arm, mowers with one or more vertical axis designed for mulching, pedestrian controlled motor mowers, lawn mowers or machines designed as lawn mowers, inter-ro Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17103:2003 - **Identifier:** ISO 17103:2003 _(verified: appears in the quote below)_ - **Item title:** Agricultural machinery — Rotary and flail mowers — Test methods and acceptance criteria for protective skirts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17103:2009 - **Withdrawn / published date:** 2003-11-06 _(verified: appears in the quote below)_ > 29041,IS,,ISO 17103:2003,Agricultural machinery — Rotary and flail mowers — Test methods and acceptance criteria for protective skirts,Matériel agricole — Faucheuses rotatives et faucheuses-broyeuses — Méthodes d'essai des jupes de protection et critères d'acceptation,2003-11-06,1,"['65.060.50','65.060.70','65.060.01']",ISO/TC 23/SC 7,9599,,[45639],"['en','fr']",2,
ISO 17103:2003 gives specifications and acceptance criteria for testing the protective skirts of rotary and flail mowers used in agriculture.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17109:2015 - **Identifier:** ISO 17109:2015 _(verified: appears in the quote below)_ - **Item title:** Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17109:2022 - **Withdrawn / published date:** 2015-07-28 _(verified: appears in the quote below)_ > 61443,IS,,ISO 17109:2015,"Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films","Analyse chimique des surfaces — Profilage d'épaisseur — Méthode pour la détermination de la vitesse de pulvérisation lors du profilage d'épaisseur par pulvérisation en spectroscopie de photoélectrons par rayons X, spectroscopie d'électrons Auger et spectrométrie de masse des ions secondaires à l'aide de films minces multicouches",2015-07-28,1,['71.040.40'],ISO/TC 201/SC 4,9599,,[83666],['en'],16,"ISO 17109:2015 speci Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1711-1:1996 - **Identifier:** ISO 1711-1:1996 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1711-1:2007 - **Withdrawn / published date:** 1996-11-28 _(verified: appears in the quote below)_ > 23591,IS,,ISO 1711-1:1996,Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets,Outils de manoeuvre pour vis et écrous — Spécifications techniques — Partie 1: Clés de serrage et douilles à main,1996-11-28,1,['25.140.30'],ISO/TC 29/SC 10,9599,"[6331,6332]",[40050],"['en','fr']",5,"
Gives minimum values for Rockwell hardness and torsinal strength which should be satisfied by hand-operated open jaw wrenches, ring wrenches and socket wrenches.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1711-1:2007 - **Identifier:** ISO 1711-1:2007 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 1711-1 | ISO 1711-1:2015 - **Withdrawn / published date:** 2007-02-13 _(verified: appears in the quote below)_ > 40050,IS,,ISO 1711-1:2007,Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets,Outils de manoeuvre pour vis et écrous — Spécifications techniques — Partie 1: Clés de serrage et douilles à main,2007-02-13,2,['25.140.01'],ISO/TC 29/SC 10,9599,[23591],"[57324,60229]","['en','fr','ru']",6,ISO 1711-1:2007 specifies minimum values for Rockwell hardness and torsional strength for hand-operated wrenches and sockets.
It covers three series of torsion torques:
ISO 1711-1: 2015 specifies minimum values for Rockwell hardness and torsional strength for hand-operated wrenches and sockets.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1711-1:2016 - **Identifier:** ISO 1711-1:2016 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1711-1:2019 - **Withdrawn / published date:** 2016-11-14 _(verified: appears in the quote below)_ > 68850,IS,,ISO 1711-1:2016,Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets,Outils de manoeuvre pour vis et écrous — Spécifications techniques — Partie 1: Clés de serrage et douilles à main,2016-11-14,4,['25.140.01'],ISO/TC 29/SC 10,9599,[60229],[78459],"['en','fr']",6,ISO 1711-1:2016 specifies minimum values for Rockwell hardness and torsional strength for hand-operated wrenches and sockets.
It covers the following three series of torsion torques:
- Series A: usual box wrenches and socket wrenches;
EXAMPLE 1 Reference nos. 1 1 02 01 0; 1 1 02 02 0 and 1 1 02 02 1; 1 1 02 03 0; 1 1 02 04 0; 1 1 02 05 0; 1 1 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1711:1975 - **Identifier:** ISO 1711:1975 _(verified: appears in the quote below)_ - **Item title:** Hand operated wrenches and sockets — Technical specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1711-1:1996 - **Withdrawn / published date:** 1975-02-01 _(verified: appears in the quote below)_ > 6331,IS,,ISO 1711:1975,Hand operated wrenches and sockets — Technical specifications,Clés de serrage et douilles à main — Spécifications techniques,1975-02-01,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[23591],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1711:1975/Amd 1:1982 - **Identifier:** ISO 1711:1975/Amd 1:1982 _(verified: appears in the quote below)_ - **Item title:** Hand operated wrenches and sockets — Technical specifications — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1711-1:1996 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 6332,IS,Amd,ISO 1711:1975/Amd 1:1982,Hand operated wrenches and sockets — Technical specifications — Amendment 1,Clés de serrage et douilles à main — Spécifications techniques — Amendement 1,1982-12-01,1,['25.140.30'],ISO/TC 29,9599,,[23591],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1711-2:2005 - **Identifier:** ISO 1711-2:2005 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets ('impact') _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1711-2:2015 - **Withdrawn / published date:** 2005-11-22 _(verified: appears in the quote below)_ > 34207,IS,,ISO 1711-2:2005,Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets ('impact'),Outils de manoeuvre pour vis et écrous — Spécifications techniques — Partie 2: Douilles à machine ('impact'),2005-11-22,1,['25.140.01'],ISO/TC 29/SC 10,9599,,[60230],"['en','fr','ru']",5,
ISO 1711-2:2005 specifies hardness and minimum torsional strength for machine-operated square drive sockets in accordance with ISO 2725-2 intended for use with impact wrenches.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1711-2:2015 - **Identifier:** ISO 1711-2:2015 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1711-2:2016 - **Withdrawn / published date:** 2015-02-26 _(verified: appears in the quote below)_ > 60230,IS,,ISO 1711-2:2015,Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact),Outils de manoeuvre pour vis et écrous — Spécifications techniques — Partie 2: Douilles à machine (impact),2015-02-26,2,['25.140.01'],ISO/TC 29/SC 10,9599,[34207],[68851],"['en','fr']",5,ISO 1711-2:2015 specifies hardness and minimum torsional strength for machine-operated square drive sockets in accordance with ISO 2725‑2 intended for use with impact wrenches.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1711-2:2016 - **Identifier:** ISO 1711-2:2016 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1711-2:2019 - **Withdrawn / published date:** 2016-11-14 _(verified: appears in the quote below)_ > 68851,IS,,ISO 1711-2:2016,Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact),Outils de manoeuvre pour vis et écrous — Spécifications techniques — Partie 2: Douilles à machine (impact),2016-11-14,3,['25.140.01'],ISO/TC 29/SC 10,9599,[60230],[78460],"['en','fr']",6,ISO 1711-2:2016 specifies hardness and minimum torsional strength for machine-operated square drive sockets in accordance with ISO 2725‑2 intended for use with impact wrenches.
EXAMPLE Reference nos. 2 2 02 01 0; 2 2 02 02 0; 5 2 00 04 0.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17115:2007 - **Identifier:** ISO 17115:2007 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Vocabulary of compositional terminological systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17115:2020 - **Withdrawn / published date:** 2007-07-02 _(verified: appears in the quote below)_ > 32881,IS,,ISO 17115:2007,Health informatics — Vocabulary of compositional terminological systems,Informatique de santé — Vocabulaire pour les systèmes terminologiques,2007-07-02,1,"['01.040.35','35.240.80']",ISO/TC 215,9599,,[73695],['en'],12,"ISO 17115:2007 defines a set of basic concepts required to describe formal concept representation systems, especially for health sciences, and describes representation of concepts and characteristics, for use especially in formal computer-based concept representation systems. A main motivation is to make it possible to precisely describe content models described in other International Standards.
ISO 17115:2007 does not include enumeration of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17117-1:2018 - **Identifier:** ISO 17117-1:2018 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Terminological resources — Part 1: Characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17117-1:2025 - **Withdrawn / published date:** 2018-04-25 _(verified: appears in the quote below)_ > 61979,IS,,ISO 17117-1:2018,Health informatics — Terminological resources — Part 1: Characteristics,Informatique de santé — Ressources terminologiques — Partie 1: Caractéristiques,2018-04-25,1,"['35.240.80','01.020']",ISO/TC 215,9599,,[88565],"['en','fr']",30,"
ISO 17117-1:2018 defines universal and specialized characteristics of health terminological resources that make them fit for the purposes required of various applications. It refers only to terminological resources that are primarily designed to be used for clinical concept representation or to those parts of other terminological resources designed to be used for clinical concept representation.
ISO 17117-1:2018 helps users to Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-1:2002 - **Identifier:** ISO 17123-1:2002 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-1:2010 - **Withdrawn / published date:** 2002-03-14 _(verified: appears in the quote below)_ > 30197,IS,,ISO 17123-1:2002,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory,Optique et instruments d'optique — Méthodes d'essai sur site pour les instruments géodésiques et d'observation — Partie 1: Théorie,2002-03-14,1,['17.180.30'],ISO/TC 172/SC 6,9599,[15447],[42215],['en'],9,
This part of ISO 17123 gives the theory used in the specification of the test procedures of the other parts of ISO 17123. These procedures assume the use of measuring methods in which systematic influences can be largely compensated or disregarded.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-1:2010 - **Identifier:** ISO 17123-1:2010 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-1:2014 - **Withdrawn / published date:** 2010-10-08 _(verified: appears in the quote below)_ > 42215,IS,,ISO 17123-1:2010,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory,Optique et instruments d'optique — Méthodes d'essai sur site pour les instruments géodésiques et d'observation — Partie 1: Théorie,2010-10-08,2,['17.180.30'],ISO/TC 172/SC 6,9599,[30197],[64156],['en'],35,"ISO 17123-1:2010 gives guidance to provide general rules for evaluating and expressing uncertainty in measurement for use in the specifications of the test procedures of ISO 17123-2, ISO 17123-3, ISO 17123-4, ISO 17123-5, ISO 17123-6, ISO 17123-7 and ISO 17123-8.
ISO 17123-2, ISO 17123-3, ISO 17123-4, ISO 17123-5, ISO 17123-6, ISO 17123-7 and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-4:2001 - **Identifier:** ISO 17123-4:2001 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM instruments) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-4:2012 - **Withdrawn / published date:** 2001-12-13 _(verified: appears in the quote below)_ > 30198,IS,,ISO 17123-4:2001,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM instruments),Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation — Partie 4: Télémètres électro-optiques (instruments MED),2001-12-13,1,['17.180.30'],ISO/TC 172/SC 6,9599,"[23674,15454,15455]",[54624],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-5:2005 - **Identifier:** ISO 17123-5:2005 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 5: Electronic tacheometers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-5:2012 - **Withdrawn / published date:** 2005-04-12 _(verified: appears in the quote below)_ > 35469,IS,,ISO 17123-5:2005,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 5: Electronic tacheometers,Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation — Partie 5: Tachéomètres électroniques,2005-04-12,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[55779],['en'],18,"
ISO 17123-5:2005 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of electronic tacheometers (total stations) and their ancillary equipment when used in building and surveying measurements. Primarily, these tests are intended to be field verifications of the suitability o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-5:2012 - **Identifier:** ISO 17123-5:2012 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 5: Total stations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-5:2018 - **Withdrawn / published date:** 2012-12-11 _(verified: appears in the quote below)_ > 55779,IS,,ISO 17123-5:2012,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 5: Total stations,Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation — Partie 5: Stations totales,2012-12-11,2,['17.180.30'],ISO/TC 172/SC 6,9599,[35469],[71689],['en'],27,
ISO 17123-5:2012 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of coordinate measurement of total stations and their ancillary equipment when used in building and surveying measurements.
These field procedures have been developed specifically for in situ applications Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-6:2003 - **Identifier:** ISO 17123-6:2003 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-6:2012 - **Withdrawn / published date:** 2003-03-11 _(verified: appears in the quote below)_ > 35470,IS,,ISO 17123-6:2003,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers,Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation — Partie 6: Lasers rotatifs,2003-03-11,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[56088],['en'],20,"
ISO 17123-6:2003 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying measurements for levelling tasks. Primarily, these tests are intended to be field verifications of the suitability of a particular instrumen Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-6:2012 - **Identifier:** ISO 17123-6:2012 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-6:2022 - **Withdrawn / published date:** 2012-06-01 _(verified: appears in the quote below)_ > 56088,IS,,ISO 17123-6:2012,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers,Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation — Partie 6: Lasers rotatifs,2012-06-01,2,['17.180.30'],ISO/TC 172/SC 6,9599,[35470],[78133],['en'],27,"
ISO 17123-6:2012 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying measurements for levelling tasks. Primarily, these tests are intended to be field verifications of the suitability of a particular in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-6:2022 - **Identifier:** ISO 17123-6:2022 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-6:2025 - **Withdrawn / published date:** 2022-05-11 _(verified: appears in the quote below)_ > 78133,IS,,ISO 17123-6:2022,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers,Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation — Partie 6: Lasers rotatifs,2022-05-11,3,['17.180.30'],ISO/TC 172/SC 6,9599,[56088],[88072],['en'],28,"
This document specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying measurements for levelling tasks. Primarily, these tests are intended to be field verifications of the suitability of a particular instr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17123-8:2007 - **Identifier:** ISO 17123-8:2007 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 8: GNSS field measurement systems in real-time kinematic (RTK) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-8:2015 - **Withdrawn / published date:** 2007-08-29 _(verified: appears in the quote below)_ > 42213,IS,,ISO 17123-8:2007,Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 8: GNSS field measurement systems in real-time kinematic (RTK),Optique et instruments d'optique — Méthodes d'essai sur site des instruments géodésiques et d'observation — Partie 8: Systèmes de mesure GNSS sur site en temps réel cinématique,2007-08-29,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[62961],['en'],15,"
ISO 17123-8:2007 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of Global Navigation Satellite System (GNSS) field measurement systems (this includes GPS, GLONASS as well as the future systems like GALI Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17126:2005 - **Identifier:** ISO 17126:2005 _(verified: appears in the quote below)_ - **Item title:** Soil quality — Determination of the effects of pollutants on soil flora — Screening test for emergence of lettuce seedlings (Lactuca sativa L.) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17126:2024 - **Withdrawn / published date:** 2005-02-09 _(verified: appears in the quote below)_ > 31214,IS,,ISO 17126:2005,Soil quality — Determination of the effects of pollutants on soil flora — Screening test for emergence of lettuce seedlings (Lactuca sativa L.),Qualité du sol — Détermination des effets des polluants sur la flore du sol — Essai de détection de l'émergence des plantules de laitue (Lactuca sativa L.),2005-02-09,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[83950],"['en','fr']",7,"
ISO 17126:2005 specifies test procedures for the determination of effects of contaminated soils or other contaminated samples on the emergence of lettuce seeds.
ISO 17126:2005 is applicable to contaminated soils, soil materials, compost, sludge and chemical testing. It is applicable to the m Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17130:2013 - **Identifier:** ISO 17130:2013 _(verified: appears in the quote below)_ - **Item title:** Leather - Physical and mechanical tests - Determination of dimensional change _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17130:2021 - **Withdrawn / published date:** 2013-04-17 _(verified: appears in the quote below)_ > 59167,IS,,ISO 17130:2013,Leather - Physical and mechanical tests - Determination of dimensional change,Cuir — Essais physiques et mécaniques — Détermination des variations dimensionnelles,2013-04-17,1,['59.140.30'],IULTCS,9599,,[78129],"['en','fr']",4,
ISO 17130:2013 specifies a method of determining the dimensional change (shrinkage) of leathers caused by ageing. It is applicable to all leathers.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17131:2012 - **Identifier:** ISO 17131:2012 _(verified: appears in the quote below)_ - **Item title:** Leather - Identification of leather with microscopy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17131:2020 - **Withdrawn / published date:** 2012-08-08 _(verified: appears in the quote below)_ > 59168,IS,,ISO 17131:2012,Leather - Identification of leather with microscopy,Cuir — Identification du cuir par microscopie,2012-08-08,1,['59.140.30'],IULTCS,9599,,[78130],"['en','fr']",11,ISO 17131:2012 specifies a method using microscopy to identify leather and distinguish it from other materials. The method is not applicable for identifying specific leathers (e.g. sheep leather).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17138:2014 - **Identifier:** ISO 17138:2014 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17138:2025 - **Withdrawn / published date:** 2014-11-18 _(verified: appears in the quote below)_ > 59195,IS,,ISO 17138:2014,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength",Céramiques techniques — Propriétés mécaniques des composites céramiques à température ambiante — Détermination de la resistance en flexion,2014-11-18,1,['81.060.30'],ISO/TC 206,9599,,[88421],"['en','fr']",8,"ISO 17138:2014 describes a method for the determination of the flexural strength of ceramic matrix composite materials with continuous fibre reinforcement, under three-point or four-point bend at room temperature. This method applies to all ceramic matrix composites with a continuous fibre reinf Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17155:2002 - **Identifier:** ISO 17155:2002 _(verified: appears in the quote below)_ - **Item title:** Soil quality — Determination of abundance and activity of soil microflora using respiration curves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17155:2012 - **Withdrawn / published date:** 2002-11-08 _(verified: appears in the quote below)_ > 31229,IS,,ISO 17155:2002,Soil quality — Determination of abundance and activity of soil microflora using respiration curves,Qualité du sol — Détermination de l'abondance et de l'activité de la microflore du sol à l'aide de courbes de respiration,2002-11-08,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[53529],['en'],12,"
ISO 17155:2002 specifies a test method for determining the activity of the active aerobic, heterotrophic microbial biomass in soils. This method is applicable to the monitoring of soil quality and to the evaluation of the ecotoxic potential of soils and soil materials. It is also applicable to soils that are contaminated experimentally in the field or in the laboratory (chemical t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1716:1973 - **Identifier:** ISO 1716:1973 _(verified: appears in the quote below)_ - **Item title:** Building materials — Determination of calorific potential _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1716:2002 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 6334,IS,,ISO 1716:1973,Building materials — Determination of calorific potential,Matériaux de construction — Détermination du potentiel calorifique,1973-12-01,1,"['13.220.50','91.100.01']",ISO/TC 92,9599,,[24928],"['en','fr']",4,"
Specifies a test method. In order to obtain a complete combustion when the characteristic to be determined is relatively low it may be necessary to add a very combustible substance, to use an envelope made of a very combustible material or to use any other method that ensures complete combustion without compromising the precision of the test.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1716:2002 - **Identifier:** ISO 1716:2002 _(verified: appears in the quote below)_ - **Item title:** Reaction to fire tests for building products — Determination of the heat of combustion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1716:2010 - **Withdrawn / published date:** 2002-02-14 _(verified: appears in the quote below)_ > 24928,IS,,ISO 1716:2002,Reaction to fire tests for building products — Determination of the heat of combustion,Essais de réaction au feu des produits de construction — Détermination de la chaleur de combustion,2002-02-14,2,"['13.220.50','91.100.01']",ISO/TC 92/SC 1,9599,[6334],[45780],"['en','fr']",24,This International Standard specifies a method for the determination of the heat of combustion of building products at constant volume in a bomb calorimeter.
This International Standard describes a test method for the measurement of the gross heat of combustion (PCS). Annex A describes the calculation of the net heat of combustion ( PCI) when required.
Information Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1716:2010 - **Identifier:** ISO 1716:2010 _(verified: appears in the quote below)_ - **Item title:** Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1716:2018 - **Withdrawn / published date:** 2010-06-04 _(verified: appears in the quote below)_ > 45780,IS,,ISO 1716:2010,Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value),Essais de réaction au feu de produits — Détermination du pouvoir calorifique supérieur (valeur calorifique),2010-06-04,3,"['13.220.50','91.100.01']",ISO/TC 92/SC 1,9599,[24928],[70177],"['en','fr','ru']",26,
ISO 1716:2010 specifies a method for the determination of the gross heat of combustion of products at constant volume in a bomb calorimeter.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17166:1999 - **Identifier:** ISO 17166:1999 _(verified: appears in the quote below)_ - **Item title:** Erythema reference action spectrum and standard erythema dose _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CIE 17166:2019 - **Withdrawn / published date:** 1999-12-16 _(verified: appears in the quote below)_ > 31245,IS,,ISO 17166:1999,Erythema reference action spectrum and standard erythema dose,Spectre d'action érythémale de référence et dose érythémale normalisée,1999-12-16,1,['17.180.20'],CIE,9599,,[74167],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17168-1:2018 - **Identifier:** ISO 17168-1:2018 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 1: Removal of nitric oxide _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17168-1:2025 - **Withdrawn / published date:** 2018-09-19 _(verified: appears in the quote below)_ > 64037,IS,,ISO 17168-1:2018,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 1: Removal of nitric oxide",Titre manque — Partie 1: Titre manque,2018-09-19,1,['81.060.30'],ISO/TC 206,9599,,[89185],['en'],15,"This document specifies a test method for the determination of the air purification performance, with regards to removal of nitric oxide, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17168-2:2018 - **Identifier:** ISO 17168-2:2018 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 2: Removal of acetaldehyde _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17168-2:2025 - **Withdrawn / published date:** 2018-09-19 _(verified: appears in the quote below)_ > 64034,IS,,ISO 17168-2:2018,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 2: Removal of acetaldehyde",Titre manque — Partie 2: Titre manque,2018-09-19,1,['81.060.30'],ISO/TC 206,9599,,[89186],['en'],16,"
This document specifies a test method for the determination of the air-purification performance, with regards to removal of acetaldehyde, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17168-3:2018 - **Identifier:** ISO 17168-3:2018 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 3: Removal of toluene _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17168-3:2025 - **Withdrawn / published date:** 2018-09-19 _(verified: appears in the quote below)_ > 64035,IS,,ISO 17168-3:2018,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 3: Removal of toluene",Titre manque — Partie 3: Titre manque,2018-09-19,1,['81.060.30'],ISO/TC 206,9599,,[89187],['en'],12,"
This document specifies a test method for the determination of the air-purification performance, with regards to the removal of toluene, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17168-4:2018 - **Identifier:** ISO 17168-4:2018 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 4: Removal of formaldehyde _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17168-4:2025 - **Withdrawn / published date:** 2018-09-19 _(verified: appears in the quote below)_ > 64036,IS,,ISO 17168-4:2018,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 4: Removal of formaldehyde",Titre manque — Partie 4: Titre manque,2018-09-19,1,['81.060.30'],ISO/TC 206,9599,,[89188],['en'],11,"
This document specifies a test method for the determination of the air-purification performance, with regards to the removal of formaldehyde, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous expo Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17168-5:2018 - **Identifier:** ISO 17168-5:2018 _(verified: appears in the quote below)_ - **Item title:** Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 5: Removal of methyl mercaptan _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17168-5:2025 - **Withdrawn / published date:** 2018-09-19 _(verified: appears in the quote below)_ > 64032,IS,,ISO 17168-5:2018,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 5: Removal of methyl mercaptan",Titre manque — Partie 5: Titre manque,2018-09-19,1,['81.060.30'],ISO/TC 206,9599,,[89189],['en'],11,"
This document specifies a test method for the determination of the air-purification performance, with regards to removal of methyl mercaptan, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1718:1974 - **Identifier:** ISO 1718:1974 _(verified: appears in the quote below)_ - **Item title:** Rock drilling — Drill-rods and detachable bits for percussive drilling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1718:1991 - **Withdrawn / published date:** 1974-06-01 _(verified: appears in the quote below)_ > 6337,IS,,ISO 1718:1974,Rock drilling — Drill-rods and detachable bits for percussive drilling,Forage des roches — Fleurets et taillants amovibles pour forage percutant,1974-06-01,1,['73.100.30'],ISO/TC 82,9599,,[6338],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17186:2002 - **Identifier:** ISO 17186:2002 _(verified: appears in the quote below)_ - **Item title:** Leather — Physical and mechanical tests — Determination of surface coating thickness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17186:2011 - **Withdrawn / published date:** 2002-12-05 _(verified: appears in the quote below)_ > 31254,IS,,ISO 17186:2002,Leather — Physical and mechanical tests — Determination of surface coating thickness,Cuir — Essais physiques et mécaniques — Détermination de l'épaisseur du revêtement de surface,2002-12-05,1,['59.140.30'],IULTCS,9599,,[51513],"['en','fr']",5,
ISO 17186:2002 specifies a method for determining the thickness of the surface coating applied to leather when measured under zero compression. It is applicable to all types of leather.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1719:1974 - **Identifier:** ISO 1719:1974 _(verified: appears in the quote below)_ - **Item title:** Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 7/8 to 1 1/4 in (22 to 32 mm) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10208:1991 | ISO 10207:1991 - **Withdrawn / published date:** 1974-09-01 _(verified: appears in the quote below)_ > 6339,IS,,ISO 1719:1974,Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 7/8 to 1 1/4 in (22 to 32 mm),Forage des roches — Matériels pour forage percutant de longs trous — Équipements à filetage corde 7/8 à 1 1/4 in (22 à 32 mm),1974-09-01,1,['73.100.30'],ISO/TC 82,9599,,"[18240,18238]","['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-1:2001 - **Identifier:** ISO 17190-1:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 1: Determination of pH _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-1:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34032,IS,,ISO 17190-1:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 1: Determination of pH,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 1: Détermination du pH,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78186],"['en','fr']",5,"This part of ISO 17190 specifies a method for determining the pH of polyacrylate (PA) superabsorbent powders.
This method has been tested in the range of pH 5,92 to pH 6,14 (see annex A), but it is expected to be applicable
to a wider range.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-10:2001 - **Identifier:** ISO 17190-10:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 10: Determination of extractable polymer content by potentiometric titration _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-10:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34041,IS,,ISO 17190-10:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 10: Determination of extractable polymer content by potentiometric titration,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 10: Détermination de la teneur en polymère extractible par titrage potentiométrique,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78195],"['en','fr']",7,"This part of ISO 17190 specifies a method for determining the mass fraction of carboxylate groups of varying chain
length present in polyacrylate (PA) superabsorbent powders which are extractabl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-2:2001 - **Identifier:** ISO 17190-2:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 2: Determination of amount of residual monomers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-2:2021 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34033,IS,,ISO 17190-2:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 2: Determination of amount of residual monomers,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 2: Détermination de la quantité de monomères résiduels,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78187],"['en','fr']",10,
This part of ISO 17190 specifies a method for determining the sum of residual monomeric sodium acrylate and
acrylic acid present in polyacrylate (PA) superabsorbent powders as acrylic acid.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-3:2001 - **Identifier:** ISO 17190-3:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 3: Determination of particle size distribution by sieve fractionation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-3:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34034,IS,,ISO 17190-3:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 3: Determination of particle size distribution by sieve fractionation,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 3: Détermination de la distribution granulométrique des particules au moyen du fractionnement par tamisage,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78188],"['en','fr']",4,"This part of ISO 17190 specifies a method for measuring particle size distributions from 45 μm to 850 μm of
cross-linked polyacrylate (PA) superabsorbent powders.
In general Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-4:2001 - **Identifier:** ISO 17190-4:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 4: Determination of moisture content by mass loss upon heating _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-4:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34035,IS,,ISO 17190-4:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 4: Determination of moisture content by mass loss upon heating,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 4: Détermination de la teneur en humidité au moyen de la perte de masse par chauffage,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78189],"['en','fr']",4,"
This part of ISO 17190 specifies a method for determining the mass loss upon heating for cross-linked polyacrylate
(PA) superabsorbent powders with a moisture content ranging between 0 % and 5 % by mass. The Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-5:2001 - **Identifier:** ISO 17190-5:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 5: Gravimetric determination of free swell capacity in saline solution _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-5:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34036,IS,,ISO 17190-5:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 5: Gravimetric determination of free swell capacity in saline solution,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 5: Détermination gravimétrique de la capacité de gonflement en solution saline,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78190],"['en','fr']",6,
This part of ISO 17190 specifies a method for the determination of the free swell capacity of polyacrylate (PA)
superabsorbent powders in saline solution.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-6:2001 - **Identifier:** ISO 17190-6:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-6:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34037,IS,,ISO 17190-6:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 6: Détermination gravimétrique de la capacité de rétention de fluides en solution saline après centrifugation,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78191],"['en','fr']",8,"This part of ISO 17190 specifies a method for determining the fluid retention capacity of polyacrylate (PA)
superabsorbent powders in saline solution Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-7:2001 - **Identifier:** ISO 17190-7:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 7: Gravimetric determination of absorption under pressure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-7:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34038,IS,,ISO 17190-7:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 7: Gravimetric determination of absorption under pressure,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 7: Détermination gravimétrique du pouvoir d'absorption sous pression,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78192],"['en','fr']",7,"
This part of ISO 17190 specifies a method for determining the capacity of polyacrylate (PA) superabsorbent
powders to absorb saline solution under a specified pressure.
This method is applicable to materials having maximum Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-8:2001 - **Identifier:** ISO 17190-8:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 8: Gravimetric determination of flowrate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-8:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34039,IS,,ISO 17190-8:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 8: Gravimetric determination of flowrate,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 8: Détermination gravimétrique du débit,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78193],"['en','fr']",5,"
This part of ISO 17190 specifies a method for determining the mass flowrate of polyacrylate (PA) superabsorbent
powders.
This method has been tested in the range 10,62 g/s to 11,93 g/s (see annex A), but it is expected to be applicable
to a wider range of mass fl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-9:2001 - **Identifier:** ISO 17190-9:2001 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 9: Gravimetric determination of density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-9:2020 - **Withdrawn / published date:** 2001-12-06 _(verified: appears in the quote below)_ > 34040,IS,,ISO 17190-9:2001,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 9: Gravimetric determination of density,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 9: Détermination gravimétrique de la masse volumique,2001-12-06,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78194],"['en','fr']",6,"
This part of ISO 17190 specifies a method for determining the apparent density of polyacrylate (PA)
superabsorbent powders.
This method has been tested in the range 0,67 g/ml to 0,72 g/ml (see annex A), but it is expected to be applicable
to a wider r Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 17190-9:2001/Cor 1:2002 - **Identifier:** ISO 17190-9:2001/Cor 1:2002 _(verified: appears in the quote below)_ - **Item title:** Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 9: Gravimetric determination of density — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17190-9:2020 - **Withdrawn / published date:** 2002-10-22 _(verified: appears in the quote below)_ > 37385,IS,Cor,ISO 17190-9:2001/Cor 1:2002,Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 9: Gravimetric determination of density — Technical Corrigendum 1,Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 9: Détermination gravimétrique de la masse volumique — Rectificatif technique 1,2002-10-22,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[78194],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 59](https://referencesource.org/iso-standard-supersessions/p/59/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 61](https://referencesource.org/iso-standard-supersessions/p/61/) Last verified: 2026-08-05. Review by: 2027-02-02.