ISO 16773-2:2007 provides guidance on optimizing the collection of EIS data from high-impedance systems. High impedance in the context of intact coatings refers to systems with an impedance greater than 109 ohm·cm2. This does not preclude measurements on systems with lower impedance.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16773-3:2009 - **Identifier:** ISO 16773-3:2009 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 3: Processing and analysis of data from dummy cells _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16773-3:2016 - **Withdrawn / published date:** 2009-04-24 _(verified: appears in the quote below)_ > 42045,IS,,ISO 16773-3:2009,Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 3: Processing and analysis of data from dummy cells,Peintures et vernis — Spectroscopie d'impédance électrochimique (SIE) sur des éprouvettes revêtues de haute impédance — Partie 3: Traitement et analyse des données obtenues à partir de cellules test,2009-04-24,1,['87.040'],ISO/TC 35/SC 9,9599,,[62350],"['en','fr']",9,"ISO 16773-3:2009 specifies a procedure for the evaluation of the experimental set-up used for carrying out EIS on high-impedance coated samples. For this purpose, dummy cells are used to simulate high-impedance coated samples. On the basis Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16773-4:2009 - **Identifier:** ISO 16773-4:2009 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 4: Examples of spectra of polymer-coated specimens _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16773-4:2017 - **Withdrawn / published date:** 2009-04-24 _(verified: appears in the quote below)_ > 42046,IS,,ISO 16773-4:2009,Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 4: Examples of spectra of polymer-coated specimens,Peintures et vernis — Spectroscopie d'impédance électrochimique (SIE) sur des éprouvettes revêtues de haute impédance — Partie 4: Exemples de spectres d'éprouvettes revêtues de polymères,2009-04-24,1,['87.040'],ISO/TC 35/SC 9,9599,,[62343],"['en','fr']",18,
ISO 16773-4:2009 gives some typical examples of impedance spectra of high-impedance coated metal samples. Some guidance on interpretation of such spectra is also given.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16781:2013 - **Identifier:** ISO 16781:2013 _(verified: appears in the quote below)_ - **Item title:** Space systems — Simulation requirements for control system _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16781:2021 - **Withdrawn / published date:** 2013-11-19 _(verified: appears in the quote below)_ > 57702,IS,,ISO 16781:2013,Space systems — Simulation requirements for control system,Systèmes spatiaux — Exigences de simulation pour le système de contrôle,2013-11-19,1,['49.140'],ISO/TC 20/SC 14,9599,,[79695],['en'],24,"ISO 16781:2013 provides guidance to control system engineers on what to simulate and how to use simulation to support their system engineering tasks. ISO 16781:2013 provides simulation requirements of control system for different phases in the process of designing a control system. Control system engineers can carry out various types of simulation experiments during various phases, according to ISO 16781:2013. ISO 16781:2013 establishes a minimum set of requirements for s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16784-1:2006 - **Identifier:** ISO 16784-1:2006 _(verified: appears in the quote below)_ - **Item title:** Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16784-1:2024 - **Withdrawn / published date:** 2006-03-14 _(verified: appears in the quote below)_ > 39604,IS,,ISO 16784-1:2006,Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems,Corrosion des métaux et alliages — Corrosion et entartrage des circuits de refroidissement à eau industriels — Partie 1: Lignes directrices pour l'évaluation pilote des additifs anticorrosion et antitartre pour circuits de refroidissement à eau à recirculation ouverts,2006-03-14,1,['77.060'],ISO/TC 156,9599,,[83206],"['en','fr']",14,"
ISO 16784-1:2006 applies to corrosion and fouling in industrial cooling water systems.
IS Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16784-2:2006 - **Identifier:** ISO 16784-2:2006 _(verified: appears in the quote below)_ - **Item title:** Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16784-2:2024 - **Withdrawn / published date:** 2006-01-26 _(verified: appears in the quote below)_ > 29612,IS,,ISO 16784-2:2006,Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig,Corrosion des métaux et alliages — Corrosion et entartrage des circuits de refroidissement à eau industriels — Partie 2: Évaluation des performances des programmes de traitement d'eau de refroidissement sur banc d'essai pilote,2006-01-26,1,['77.060'],ISO/TC 156,9599,,[83207],"['en','fr']",19,
ISO 16784-2:2006 applies to corrosion and fouling in industrial cooling water systems
ISO 16784-2:2006 describes a method for preliminary evaluation of the performance of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16787:2016 - **Identifier:** ISO 16787:2016 _(verified: appears in the quote below)_ - **Item title:** Intelligent transport systems — Assisted Parking System (APS) — Performance requirements and test procedures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16787:2017 - **Withdrawn / published date:** 2016-10-31 _(verified: appears in the quote below)_ > 63626,IS,,ISO 16787:2016,Intelligent transport systems — Assisted Parking System (APS) — Performance requirements and test procedures,Systèmes intelligents de transport — Système de stationnement assisté (APS) — Exigences de performance et modes opératoires d'essai,2016-10-31,1,['35.240.60'],ISO/TC 204,9599,,[73768],['en'],28,"
ISO 16787:2016 for Assisted Parking System (APS) addresses light-duty vehicles, e.g. passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded) equipped with such APS. This document establishes minimum functionality requirements that the driver can expect of the system, such as the detection of suitable parking spaces, calculation o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1679:1973 - **Identifier:** ISO 1679:1973 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 1679-1973 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6586:1980 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 6292,IS,,ISO 1679:1973,Withdrawal of ISO 1679-1973,Annulation de l'ISO 1679-1973,1973-12-01,1,['35.040.10'],ISO/IEC JTC 1,9599,,[12991],['en'],4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16790:2005 - **Identifier:** ISO 16790:2005 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of drawing characteristics of thermoplastics in the molten state _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16790:2021 - **Withdrawn / published date:** 2005-06-23 _(verified: appears in the quote below)_ > 41632,IS,,ISO 16790:2005,Plastics — Determination of drawing characteristics of thermoplastics in the molten state,Plastiques — Détermination des caractéristiques d'étirage des thermoplastiques à l'état fondu,2005-06-23,1,['83.080.20'],ISO/TC 61/SC 5,9599,,[80004],"['en','fr']",16,"
ISO 16790:2005 specifies a method for determining the drawing and break characteristics of molten plastics. The method involves the measurement of the force generated in deforming a molten filament under defined extrusion temperature and drawing conditions.
Data is generated under non-isothermal and non-homogeneous deformation conditions. However, it is useful for the interpretation of polymer behaviour i Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16792:2006 - **Identifier:** ISO 16792:2006 _(verified: appears in the quote below)_ - **Item title:** Technical product documentation — Digital product definition data practices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16792:2015 - **Withdrawn / published date:** 2006-12-15 _(verified: appears in the quote below)_ > 31065,IS,,ISO 16792:2006,Technical product documentation — Digital product definition data practices,Documentation technique de produits — Données de définition d'un produit,2006-12-15,1,"['35.240.10','01.110']",ISO/TC 10,9599,,[56865],['en'],100,"
ISO 16792:2006 specifies requirements for the preparation, revision and presentation of digital product definition data (data sets). It supports two methods of application: model-only, and model and drawing in digital format.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16792:2015 - **Identifier:** ISO 16792:2015 _(verified: appears in the quote below)_ - **Item title:** Technical product documentation — Digital product definition data practices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16792:2021 - **Withdrawn / published date:** 2015-11-19 _(verified: appears in the quote below)_ > 56865,IS,,ISO 16792:2015,Technical product documentation — Digital product definition data practices,Documentation technique de produits — Données de définition d'un produit,2015-11-19,2,"['35.240.10','01.110']",ISO/TC 10,9599,[31065],[73871],['en'],111,"ISO 16792:2015 specifies requirements for the preparation, revision, and presentation of digital product definition data, hereafter referred to as data sets. It supports two methods of application: model-only and model and drawing in digital format. Its structure presents requirements common to both methods followed by clauses providing for any essential, differing requirements for each method. Additionally, its use in conjunction with co Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16793:2005 - **Identifier:** ISO 16793:2005 _(verified: appears in the quote below)_ - **Item title:** Nuclear fuel technology — Guide for ceramographic preparation of UO2 sintered pellets for microstructure examination _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16793:2018 - **Withdrawn / published date:** 2005-02-14 _(verified: appears in the quote below)_ > 39217,IS,,ISO 16793:2005,Nuclear fuel technology — Guide for ceramographic preparation of UO2 sintered pellets for microstructure examination,Technologie du combustible nucléaire — Guide pour la préparation céramographique de pastilles UO2 frittées pour l'examen de la microstructure,2005-02-14,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[73165],"['en','fr']",7,
ISO 16793:2005 describes the ceramographic preparation of uranium dioxide (UO2) sintered pellets for qualitative and quantitative microstructure examinations.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16795:2004 - **Identifier:** ISO 16795:2004 _(verified: appears in the quote below)_ - **Item title:** Nuclear energy — Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16795:2024 | ISO/DIS 16795 - **Withdrawn / published date:** 2004-07-27 _(verified: appears in the quote below)_ > 31068,IS,,ISO 16795:2004,Nuclear energy — Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry,Énergie nucléaire — Dosage de Gd2O3 dans des pastilles combustibles au gadolinium par spectrométrie à fluorescence X,2004-07-27,1,['27.120.30'],ISO/TC 85/SC 5,9599,,"[85235,71472]","['en','fr']",7,"ISO 16795:2004 covers the determination of Gd2O3 in sintered fuel pellets, by X-ray fluorescence spectrometry using the Gd L-alpha line. The fuel pellets are polished before X-ray examination. This method has been tested for mass fractions of from 2 % to 10 % Gd2O3.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16796:2004 - **Identifier:** ISO 16796:2004 _(verified: appears in the quote below)_ - **Item title:** Nuclear energy — Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16796:2022 - **Withdrawn / published date:** 2004-08-17 _(verified: appears in the quote below)_ > 40243,IS,,ISO 16796:2004,Nuclear energy — Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES),Énergie nucléaire — Dosage de Gd2O3 dans des mélanges de poudres et dans des pastilles combustibles au gadolinium par spectrométrie par émission atomique à plasma à couplage inductif (ICP-AES),2004-08-17,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[78874],"['en','fr']",6,"ISO 16796:2004 is applicable to the determination of Gd2O3 in powder blends and sintered pellets of Gd2O3 + UO2 from 1 % to 10 %, by the ICP-AES method.
" 40244, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1680-1:1986 - **Identifier:** ISO 1680-1:1986 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machinery — Part 1: Engineering method for free-field conditions over a reflecting plane _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1680:1999 - **Withdrawn / published date:** 1986-06-19 _(verified: appears in the quote below)_ > 6294,IS,,ISO 1680-1:1986,Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machinery — Part 1: Engineering method for free-field conditions over a reflecting plane,Acoustique — Code d'essai pour le mesurage du bruit aérien émis par les machines électriques tournantes — Partie 1: Méthode d'expertise pour les conditions de champ libre au-dessus d'un plan réfléchissant,1986-06-19,1,"['29.160.01','17.140.20']",ISO/TC 43/SC 1,9599,[6293],[25629],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1680:1999 - **Identifier:** ISO 1680:1999 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1680:2013 - **Withdrawn / published date:** 1999-10-14 _(verified: appears in the quote below)_ > 25629,IS,,ISO 1680:1999,Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines,Acoustique — Code d'essai pour le mesurage du bruit aérien émis par les machines électriques tournantes,1999-10-14,1,"['29.160.01','17.140.20']",ISO/TC 43/SC 1,9599,"[6295,6294]",[63318],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1680-2:1986 - **Identifier:** ISO 1680-2:1986 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machinery — Part 2: Survey method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1680:1999 - **Withdrawn / published date:** 1986-06-19 _(verified: appears in the quote below)_ > 6295,IS,,ISO 1680-2:1986,Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machinery — Part 2: Survey method,Acoustique — Code d'essai pour le mesurage du bruit aérien émis par les machines électriques tournantes — Partie 2: Méthode de contrôle,1986-06-19,1,"['29.160.01','17.140.20']",ISO/TC 43/SC 1,9599,[6293],[25629],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16808:2014 - **Identifier:** ISO 16808:2014 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16808:2022 - **Withdrawn / published date:** 2014-07-31 _(verified: appears in the quote below)_ > 57777,IS,,ISO 16808:2014,Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems,Matériaux métalliques — Tôles et bandes — Détermination de la courbe contrainte-déformation biaxiale au moyen de l'essai de gonflement hydraulique avec systèmes de mesure optiques,2014-07-31,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[82103],"['en','fr']",26,"ISO 16808:2014 specifies a method for determination of the biaxial stress-strain curve of metallic sheets having a thickness below 3 mm in pure stretch forming without significant friction influence. In comparison with tensile test results, higher strain values can be achieved.< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16809:2012 - **Identifier:** ISO 16809:2012 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic thickness measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16809:2017 - **Withdrawn / published date:** 2012-11-13 _(verified: appears in the quote below)_ > 57780,IS,,ISO 16809:2012,Non-destructive testing — Ultrasonic thickness measurement,Essais non destructifs — Mesurage de l'épaisseur par ultrasons,2012-11-13,1,['19.100'],ISO/TC 135/SC 3,9599,,[72430],['en'],32,"
ISO 16809:2012 specifies the principles for ultrasonic thickness measurement of metallic and non-metallic materials by direct contact, based on measurement of time-of-flight of ultrasonic pulses only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16809:2017 - **Identifier:** ISO 16809:2017 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic thickness measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16809:2025 - **Withdrawn / published date:** 2017-11-28 _(verified: appears in the quote below)_ > 72430,IS,,ISO 16809:2017,Non-destructive testing — Ultrasonic thickness measurement,Essais non destructifs — Mesurage de l'épaisseur par ultrasons,2017-11-28,2,['19.100'],ISO/TC 135/SC 3,9599,[57780],[87436],"['en','fr']",37,"ISO 16809:2017 specifies the principles for ultrasonic thickness measurement of metallic and non-metallic materials by direct contact, based on measurement of time of flight of ultrasonic pulses only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16810:2012 - **Identifier:** ISO 16810:2012 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16810:2024 - **Withdrawn / published date:** 2012-03-23 _(verified: appears in the quote below)_ > 57781,IS,,ISO 16810:2012,Non-destructive testing — Ultrasonic testing — General principles,Essais non destructifs — Contrôle par ultrasons — Principes généraux,2012-03-23,1,['19.100'],ISO/TC 135/SC 3,9599,,[86362],"['en','fr']",10,"ISO 16810:2012 defines the general principles required for the ultrasonic examination of industrial products that permit the transmission of ultrasound.
The specific conditions of application and use of ultrasonic examination, which depend on the type of product examined, are described in documents which could include: a) product standards; b) specifications; c) codes; d) contractual documents; e) written procedures.
Unless otherwise specified in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16811:2012 - **Identifier:** ISO 16811:2012 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — Sensitivity and range setting _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16811:2025 - **Withdrawn / published date:** 2012-03-23 _(verified: appears in the quote below)_ > 57782,IS,,ISO 16811:2012,Non-destructive testing — Ultrasonic testing — Sensitivity and range setting,Essais non destructifs — Contrôle par ultrasons — Réglage de la sensibilité et de la base de temps,2012-03-23,1,['19.100'],ISO/TC 135/SC 3,9599,,[86364],"['en','fr']",38,"
ISO 16811:2012 specifies the general rules for setting the timebase range and sensitivity (i.e. gain adjustment) of a manually operated ultrasonic flaw detector with A-scan display in order that reproducible measurements may be made of the location and echo height of a reflector.
ISO 16811:2012 is applicable to techniques employing a single contact probe with either a single or twin transducers, but excludes the im Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16812:2002 - **Identifier:** ISO 16812:2002 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Shell-and-tube heat exchangers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16812:2007 - **Withdrawn / published date:** 2002-07-11 _(verified: appears in the quote below)_ > 32432,IS,,ISO 16812:2002,Petroleum and natural gas industries — Shell-and-tube heat exchangers,Industries du pétrole et du gaz naturel — Échangeurs de chaleur à faisceaux,2002-07-11,1,"['27.060.30','75.180.20']",ISO/TC 67/SC 6,9599,,[38661],"['en','fr']",39,"
This International Standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum and natural gas industries.
This International Standard is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers, coolers and reboilers.
This Internation Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16812:2007 - **Identifier:** ISO 16812:2007 _(verified: appears in the quote below)_ - **Item title:** Petroleum, petrochemical and natural gas industries — Shell-and-tube heat exchangers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16812:2019 | ISO/CD 16812 - **Withdrawn / published date:** 2007-02-12 _(verified: appears in the quote below)_ > 38661,IS,,ISO 16812:2007,"Petroleum, petrochemical and natural gas industries — Shell-and-tube heat exchangers","Industries du pétrole, de la pétrochimie et du gaz naturel — Échangeurs de chaleur à faisceaux",2007-02-12,2,"['27.060.30','75.180.20']",ISO/TC 67/SC 6,9599,[32432],"[74317,56042]","['en','fr','ru']",41,"
ISO 16812:2007 specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries.
ISO 16812:2007 is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16813:2006 - **Identifier:** ISO 16813:2006 _(verified: appears in the quote below)_ - **Item title:** Building environment design — Indoor environment — General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16813:2024 | ISO/DIS 16813 | ISO/NP 16813 - **Withdrawn / published date:** 2006-05-12 _(verified: appears in the quote below)_ > 41300,IS,,ISO 16813:2006,Building environment design — Indoor environment — General principles,Conception de l'environnement des bâtiments — Environnement intérieur — Principes généraux,2006-05-12,1,['91.040.01'],ISO/TC 205,9599,,"[83780,62819,61022]","['en','fr']",15,"
ISO16813:2006 establishes the general principles of building environment design taking into account healthy indoor environment for the occupants, and protecting the environment for future generations. ISO16813:2006 promotes an approach in which the various parties involved in building environmental design collaborate with one another to provide a sustainable building environment.
The unique features of the design proc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16817:2012 - **Identifier:** ISO 16817:2012 _(verified: appears in the quote below)_ - **Item title:** Building environment design — Indoor environment — Design process for visual environment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16817:2017 - **Withdrawn / published date:** 2012-01-10 _(verified: appears in the quote below)_ > 50479,IS,,ISO 16817:2012,Building environment design — Indoor environment — Design process for visual environment,Conception de l'environnement des bâtiments — Environnement intérieur — Processus de conception de l'environnement visuel,2012-01-10,1,['91.040.01'],ISO/TC 205,9599,,[61021],"['en','fr']",23,"
ISO 16817:2012 provides an integrated design process for a high-quality indoor visual environment including architectural and engineering aspects of daylighting and artificial lighting for user satisfaction, well-being and productivity as well as the energy performance and sustainability of buildings.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16820:2004 - **Identifier:** ISO 16820:2004 _(verified: appears in the quote below)_ - **Item title:** Sensory analysis — Methodology — Sequential analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16820:2019 - **Withdrawn / published date:** 2004-06-23 _(verified: appears in the quote below)_ > 31085,IS,,ISO 16820:2004,Sensory analysis — Methodology — Sequential analysis,Analyse sensorielle — Méthodologie — Analyse séquentielle,2004-06-23,1,['67.240'],ISO/TC 34/SC 12,9599,,[76670],"['en','fr']",10,"ISO 16820:2004 describes a procedure for statistically analysing data from forced-choice sensory discrimination tests, such as the Triangle, Duo-Trio, 3-AFC, 2-AFC, in which after every trial of the discrimination test the decision can be made to stop testing and declare a difference, to stop testing and declare no difference, or to continue testing.
The sequential method often allows for a decision to be made after fewer trials of the discrimination test than would be required Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16823:2012 - **Identifier:** ISO 16823:2012 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — Transmission technique _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16823:2025 - **Withdrawn / published date:** 2012-03-23 _(verified: appears in the quote below)_ > 57783,IS,,ISO 16823:2012,Non-destructive testing — Ultrasonic testing — Transmission technique,Essais non destructifs — Contrôle par ultrasons — Technique par transmission,2012-03-23,1,['19.100'],ISO/TC 135/SC 3,9599,,[86365],"['en','fr','ru']",7,"
ISO 16823:2012 specifies the principles of transmission techniques.
Transmission techniques can be used for: a) detection of imperfections; b) determination of attenuation.
The general principles required for the use of ultrasonic examination of industrial products are described in ISO 16810.
The transmission technique is used for examination of flat products, e.g. plates and sheets.
Further, it is used for examinatio Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16826:2012 - **Identifier:** ISO 16826:2012 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16826:2025 - **Withdrawn / published date:** 2012-03-23 _(verified: appears in the quote below)_ > 57784,IS,,ISO 16826:2012,Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface,Essais non destructifs — Contrôle par ultrasons — Contrôle des discontinuités perpendiculaires à la surface,2012-03-23,1,['19.100'],ISO/TC 135/SC 3,9599,,[86366],"['en','fr']",14,"
ISO 16826:2012 defines the principles for tandem‑ and longitudinal-longitudinal-transverse (LLT) wave‑examination for the detection of discontinuities perpendicular to the surface.
The general principles required for the ultrasonic examination of industrial products are described in ISO 16810. A list of symbols and equations is given in ISO 16811.
The tandem‑ or LLT‑exa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16827:2012 - **Identifier:** ISO 16827:2012 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16827:2025 - **Withdrawn / published date:** 2012-03-23 _(verified: appears in the quote below)_ > 57785,IS,,ISO 16827:2012,Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities,Essais non destructifs — Contrôle par ultrasons — Caractérisation et dimensionnement des discontinuités,2012-03-23,1,['19.100'],ISO/TC 135/SC 3,9599,,[86367],"['en','fr']",52,"
ISO 16827:2012 specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria. It is applicable, in general terms, to discontinuities in those materials and applications covered by ISO 16810.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16828:2012 - **Identifier:** ISO 16828:2012 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16828:2025 - **Withdrawn / published date:** 2012-03-23 _(verified: appears in the quote below)_ > 57786,IS,,ISO 16828:2012,Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities,Essais non destructifs — Contrôle par ultrasons — Technique de diffraction du temps de vol utilisée comme méthode de détection et de dimensionnement des discontinuités,2012-03-23,1,['19.100'],ISO/TC 135/SC 3,9599,,[86368],"['en','fr']",19,"ISO 16828:2012 defines the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low alloyed carbon steel components. It can also be used for other types of materials, provided the application of the TOFD Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1683:1983 - **Identifier:** ISO 1683:1983 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Preferred reference quantities for acoustic levels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1683:2008 - **Withdrawn / published date:** 1983-10-01 _(verified: appears in the quote below)_ > 6298,IS,,ISO 1683:1983,Acoustics — Preferred reference quantities for acoustic levels,Acoustique — Grandeurs normales de référence pour les niveaux acoustiques,1983-10-01,1,['17.140.01'],ISO/TC 43,9599,,[43600],"['en','fr']",2,
Specifies a preferred set with convenient magnitudes and gives definitions of some levels for acoustics. Applies to oscillatory quanitities.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1683:2008 - **Identifier:** ISO 1683:2008 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Preferred reference values for acoustical and vibratory levels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1683:2015 - **Withdrawn / published date:** 2008-08-05 _(verified: appears in the quote below)_ > 43600,IS,,ISO 1683:2008,Acoustics — Preferred reference values for acoustical and vibratory levels,Acoustique — Valeurs de référence recommandées pour les niveaux acoustiques et vibratoires,2008-08-05,2,['17.140.01'],ISO/TC 43,9599,[6298],[64648],"['en','fr']",3,"ISO 1683:2008 specifies reference values used in acoustics, in order to establish a uniform basis for the expression of acoustical and vibratory levels.
The reference values are mandatory for use in acoustics for airborne and structure-borne sound but may also be used in other applications.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16831:2012 - **Identifier:** ISO 16831:2012 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16831:2025 - **Withdrawn / published date:** 2012-03-23 _(verified: appears in the quote below)_ > 57789,IS,,ISO 16831:2012,Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment,Essais non destructifs — Contrôle par ultrasons — Caractérisation et vérification des appareils de mesure de l'épaisseur par ultrasons,2012-03-23,1,['19.100'],ISO/TC 135/SC 3,9599,,[86369],['en'],16,ISO 16831:2012 specifies methods and acceptance criteria for assessing the performance of instruments for measuring thickness using pulse-echo ultrasound.
ISO 16831:2012 covers both direct (digital) reading and waveform display types using single or dual element probes.
ISO 16831:2012 can be used for verifying equipment covered by EN Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16834:2006 - **Identifier:** ISO 16834:2006 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16834:2012 - **Withdrawn / published date:** 2006-01-09 _(verified: appears in the quote below)_ > 38132,IS,,ISO 16834:2006,"Welding consumables — Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels — Classification","Produits consommables pour le soudage — Fils-électrodes, fils, baguettes et dépôts pour le soudage à l'arc sous flux gazeux des aciers à haute résistance — Classification",2006-01-09,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[57189],"['en','fr']",13,"
ISO 16834:2006 specifies requirements for classification of wire electrodes, wires, rods and weld deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas-shielded metal arc welding and tungsten inert-gas welding of high strength steels with a minimu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16834:2012 - **Identifier:** ISO 16834:2012 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16834:2025 - **Withdrawn / published date:** 2012-05-02 _(verified: appears in the quote below)_ > 57189,IS,,ISO 16834:2012,"Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification","Produits consommables pour le soudage — Fils-électrodes, fils, baguettes et dépôts pour le soudage à l'arc sous flux gazeux des aciers à haute résistance — Classification",2012-05-02,2,['25.160.20'],ISO/TC 44/SC 3,9599,[38132],[86234],"['en','fr']",14,"
ISO 16834:2012 specifies requirements for classification of wire electrodes, wires, rods and all-weld metal deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas shielded metal arc welding and tungsten inert-gas welding of high-strength stee Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16840-10:2014 - **Identifier:** ISO 16840-10:2014 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Resistance to ignition of non-integrated seat and back support cushions — Part 10: Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16840-10:2021 - **Withdrawn / published date:** 2014-12-05 _(verified: appears in the quote below)_ > 57578,IS,,ISO 16840-10:2014,Wheelchairs — Resistance to ignition of non-integrated seat and back support cushions — Part 10: Requirements and test methods,Fauteuils roulants — Résistance à l'inflammation des coussins de sièges et de dossiers non intégrés — Partie 10: Exigences et méthodes d'essai,2014-12-05,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[79159],"['en','fr']",13,"
ISO 16840-10:2014 specifies requirements and test methods to assess the resistance to ignition by smouldering cigarette equivalent of non-integrated components of a wheelchair intended to protect tissue integrity.
The test measures only the resistance to ignition by smouldering cigarette equivalent of the items teste Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16840-2:2007 - **Identifier:** ISO 16840-2:2007 _(verified: appears in the quote below)_ - **Item title:** Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity — Seat cushions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16840-2:2018 | ISO/NP 16840-2 - **Withdrawn / published date:** 2007-07-03 _(verified: appears in the quote below)_ > 40980,IS,,ISO 16840-2:2007,Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity — Seat cushions,Sièges de fauteuils roulants — Partie 2: Détermination des caractéristiques physiques et mécaniques des dispositifs de répartition de pression — Coussins d'assise,2007-07-03,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[66972,61677]",['en'],25,"
ISO 16840-2:2007 specifies apparatus, test methods and disclosure requirements for wheelchair seat cushions intended to maintain tissue integrity and prevent tissue trauma. It does not include test methods or requirements for determining the fire resistance of cushions and addresse Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16840-3:2006 - **Identifier:** ISO 16840-3:2006 _(verified: appears in the quote below)_ - **Item title:** Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16840-3:2014 | ISO/NP 16840-3 - **Withdrawn / published date:** 2006-07-04 _(verified: appears in the quote below)_ > 42116,IS,,ISO 16840-3:2006,"Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices","Sièges de fauteuils roulants — Partie 3: Détermination des efforts statiques, d'impact et cycliques pour les dispositifs de maintien de la posture",2006-07-04,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[61349,50424]",['en'],23,"
ISO 16840-3:2006 specifies test methods for the determination of static, impact and repetitive load strengths as well as disclosure requirements for postural support devices (PSD) with associated attachment hardware intended for use with wheelchairs.
ISO 16840-3:2006 does not test the transportability and the use o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16840-3:2014 - **Identifier:** ISO 16840-3:2014 _(verified: appears in the quote below)_ - **Item title:** Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16840-3:2022 - **Withdrawn / published date:** 2014-01-22 _(verified: appears in the quote below)_ > 61349,IS,,ISO 16840-3:2014,"Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices","Sièges de fauteuils roulants — Partie 3: Détermination des efforts statiques, d'impact et cycliques pour les dispositifs de maintien de la posture",2014-01-22,2,['11.180.10'],ISO/TC 173/SC 1,9599,[42116],[79160],"['en','fr']",30,"
ISO 16840-3:2014 specifies test methods for the determination of static, impact, and repetitive load strengths as well as disclosure requirements for postural support devices (PSD) with associated attachment hardware intended for use with an undefined wheelchair.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16840-6:2015 - **Identifier:** ISO 16840-6:2015 _(verified: appears in the quote below)_ - **Item title:** Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 16840-6 | ISO 16840-6:2026 - **Withdrawn / published date:** 2015-09-17 _(verified: appears in the quote below)_ > 50420,IS,,ISO 16840-6:2015,Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions,Sièges de fauteuils roulants — Partie 6: Simulation d'utilisation et détermination des changements de propriétés des coussins de sièges,2015-09-17,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[83001,89717]","['en','fr']",29,"ISO 16840-6:2015 specifies apparatus, test methods, and disclosure requirements for generating aging effects in a seat cushion that reproduce those seen in use. It also provides methods of determining changes in the physical and mechanical properties of seat cushions based on their age and use. ISO 16840-6:2015 provides a set of tests that si Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16842:2014 - **Identifier:** ISO 16842:2014 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16842:2021 - **Withdrawn / published date:** 2014-10-01 _(verified: appears in the quote below)_ > 57812,IS,,ISO 16842:2014,Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece,Matériaux métalliques — Tôles et bandes — Méthode d'essai de traction biaxiale sur éprouvette cruciforme,2014-10-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[82087],"['en','fr']",24,"
ISO 16842:2014 specifies the method for measuring the stress-strain curves of sheet metals subject to biaxial tension using a cruciform test piece fabricated from a sheet metal sample. The applicable thickness of the sheet shall be 0,1 mm or more and 0,08 times or less of the arm width of the cruciform test piece. The test temperature shall range from 10 °C to 35 °C. The amount of plastic s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-1:2001 - **Identifier:** ISO 16844-1:2001 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 1: Electrical connectors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-1:2013 - **Withdrawn / published date:** 2001-09-20 _(verified: appears in the quote below)_ > 33654,IS,,ISO 16844-1:2001,Road vehicles — Tachograph systems — Part 1: Electrical connectors,Véhicules routiers — Systèmes tachygraphes — Partie 1: Connecteurs électriques,2001-09-20,1,['43.040.10'],ISO/TC 22,9599,,[55436],['en'],7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-1:2001/Cor 1:2005 - **Identifier:** ISO 16844-1:2001/Cor 1:2005 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 1: Electrical connectors — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-1:2013 - **Withdrawn / published date:** 2005-01-05 _(verified: appears in the quote below)_ > 41342,IS,Cor,ISO 16844-1:2001/Cor 1:2005,Road vehicles — Tachograph systems — Part 1: Electrical connectors — Technical Corrigendum 1,Véhicules routiers — Systèmes tachygraphes — Partie 1: Connecteurs électriques — Rectificatif technique 1,2005-01-05,1,['43.040.10'],ISO/TC 22,9599,,[55436],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-1:2013 - **Identifier:** ISO 16844-1:2013 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 1: Electrical connectors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-1:2022 - **Withdrawn / published date:** 2013-02-25 _(verified: appears in the quote below)_ > 55436,IS,,ISO 16844-1:2013,Road vehicles — Tachograph systems — Part 1: Electrical connectors,Véhicules routiers — Systèmes tachygraphes — Partie 1: Connecteurs électriques,2013-02-25,2,['43.040.10'],ISO/TC 22/SC 31,9599,"[41342,33654]",[76950],['en'],7,"
ISO 16844-1:2013 gives the dimensions and tests and requirements for the performance of electrical connectors needed for ensuring the interchangeability of different components of the tachograph systems used for road vehicles in accordance with Council Regulation (EEC) No. 3821/85 on recording equipment in road transport. In particular, ISO 16844-1:2013 specifies the connectors used to connect the recording unit of the tachograph to the v Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-2:2004 - **Identifier:** ISO 16844-2:2004 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 2: Recording unit, electrical interface _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-2:2011 - **Withdrawn / published date:** 2004-05-17 _(verified: appears in the quote below)_ > 33655,IS,,ISO 16844-2:2004,"Road vehicles — Tachograph systems — Part 2: Recording unit, electrical interface","Véhicules routiers — Systèmes tachygraphes — Partie 2: Unité d'enregistrement, interface électrique",2004-05-17,1,['43.040.10'],ISO/TC 22,9599,,[52371],['en'],6,"
ISO 16844-2:2004 specifies the electrical connection between the recording unit, and the vehicle network and motion sensor, in tachograph systems used in road vehicles.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-2:2011 - **Identifier:** ISO 16844-2:2011 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 2: Electrical interface with recording unit _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-2:2022 - **Withdrawn / published date:** 2011-03-01 _(verified: appears in the quote below)_ > 52371,IS,,ISO 16844-2:2011,Road vehicles — Tachograph systems — Part 2: Electrical interface with recording unit,Véhicules routiers — Systèmes tachygraphes — Partie 2: Interface électrique avec unité d'enregistrement,2011-03-01,2,['43.040.10'],ISO/TC 22/SC 31,9599,[33655],[76951],['en'],6,"ISO 16844-2:2011 specifies the electrical connection between the recording unit, and the vehicle network and the motion sensor, in tachograph systems used in road vehicles.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-3:2004 - **Identifier:** ISO 16844-3:2004 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 3: Motion sensor interface _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-3:2022 | ISO/WD 16844-3 - **Withdrawn / published date:** 2004-11-17 _(verified: appears in the quote below)_ > 33656,IS,,ISO 16844-3:2004,Road vehicles — Tachograph systems — Part 3: Motion sensor interface,Véhicules routiers — Systèmes tachygraphes — Partie 3: Interface de capteur de mouvement,2004-11-17,1,['43.040.10'],ISO/TC 22/SC 31,9599,,"[76953,52372]",['en'],34,"ISO 16844-3:2004 specifies the physical and data link layers of the electrical interface connecting a motion sensor to a vehicle unit, used in tachograph systems in road vehicles to perform speed signal transmission and data interchange.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-3:2004/Cor 1:2006 - **Identifier:** ISO 16844-3:2004/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 3: Motion sensor interface — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-3:2022 | ISO/WD 16844-3 - **Withdrawn / published date:** 2006-03-02 _(verified: appears in the quote below)_ > 43938,IS,Cor,ISO 16844-3:2004/Cor 1:2006,Road vehicles — Tachograph systems — Part 3: Motion sensor interface — Technical Corrigendum 1,Véhicules routiers — Systèmes tachygraphes — Partie 3: Interface de capteur de mouvement — Rectificatif technique 1,2006-03-02,1,['43.040.10'],ISO/TC 22/SC 31,9599,,"[76953,52372]",['en'],10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-4:2004 - **Identifier:** ISO 16844-4:2004 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 4: CAN interface _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-4:2015 - **Withdrawn / published date:** 2004-09-07 _(verified: appears in the quote below)_ > 33657,IS,,ISO 16844-4:2004,Road vehicles — Tachograph systems — Part 4: CAN interface,Véhicules routiers — Systèmes tachygraphes — Partie 4: Interface CAN,2004-09-07,1,['43.040.10'],ISO/TC 22/SC 31,9599,,[57314],['en'],18,"ISO 16844-4:2004 specifies the CAN (controller area network) interface for the interchange -- performed in accordance ISO 16844-6 -- of digital information between a road vehicle's tachograph system and vehicle units, and within the tachograph system itself. It specifies parameters of, and requirements for, the physical and data link layers of the electrical connection used in the electronic systems.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-4:2015 - **Identifier:** ISO 16844-4:2015 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 4: CAN interface _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-4:2022 - **Withdrawn / published date:** 2015-01-13 _(verified: appears in the quote below)_ > 57314,IS,,ISO 16844-4:2015,Road vehicles — Tachograph systems — Part 4: CAN interface,Véhicules routiers — Systèmes tachygraphes — Partie 4: Interface CAN,2015-01-13,2,['43.040.10'],ISO/TC 22/SC 31,9599,[33657],[76955],['en'],19,"ISO 16844-4:2015 specifies the controller area network (CAN) interface for the interchange of digital information between a road vehicle's tachograph system and vehicle units, and within the tachograph system itself. It specifies parameters of, and requirements for, the application of physical and data link layers of the electrical connection used in the electronic systems.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-6:2004 - **Identifier:** ISO 16844-6:2004 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 6: Diagnostics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-6:2015 - **Withdrawn / published date:** 2004-08-17 _(verified: appears in the quote below)_ > 33659,IS,,ISO 16844-6:2004,Road vehicles — Tachograph systems — Part 6: Diagnostics,Véhicules routiers — Systèmes tachygraphes — Partie 6: Diagnostic,2004-08-17,1,['43.040.10'],ISO/TC 22/SC 31,9599,,[59683],['en'],16,"ISO 16844-6:2004 specifies diagnostic communication and services in tachograph systems used in road vehicles, for both the CAN and K-line communication modes. It is also applicable for programming purposes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-6:2015 - **Identifier:** ISO 16844-6:2015 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 6: Diagnostics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-6:2022 - **Withdrawn / published date:** 2015-01-13 _(verified: appears in the quote below)_ > 59683,IS,,ISO 16844-6:2015,Road vehicles — Tachograph systems — Part 6: Diagnostics,Véhicules routiers — Systèmes tachygraphes — Partie 6: Diagnostic,2015-01-13,2,['43.040.10'],ISO/TC 22/SC 31,9599,[33659],[76956],['en'],13,ISO 16844-6:2014 defines diagnostic communication and services for tachograph systems of road vehicles. The communication is specified both for CAN communication mode and K-line communication mode.
The diagnostic services based on ISO 14229-1 and most services are common for the two communication interfaces. Interface specific implementations are specified in the respective sections.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-7:2004 - **Identifier:** ISO 16844-7:2004 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 7: Parameters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-7:2015 - **Withdrawn / published date:** 2004-08-17 _(verified: appears in the quote below)_ > 33660,IS,,ISO 16844-7:2004,Road vehicles — Tachograph systems — Part 7: Parameters,Véhicules routiers — Systèmes tachygraphes — Partie 7: Paramètres,2004-08-17,1,['43.040.10'],ISO/TC 22/SC 31,9599,,[57315],['en'],33,"ISO 16844-7:2004 specifies the parameters used in the interchange of digital information between a road vehicle's tachograph system and vehicle units or a diagnostic tester, or within the tachograph system itself. The parameters are applicable for real time communication and/or diagnostic services.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16844-7:2015 - **Identifier:** ISO 16844-7:2015 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Tachograph systems — Part 7: Parameters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16844-7:2022 - **Withdrawn / published date:** 2015-01-13 _(verified: appears in the quote below)_ > 57315,IS,,ISO 16844-7:2015,Road vehicles — Tachograph systems — Part 7: Parameters,Véhicules routiers — Systèmes tachygraphes — Partie 7: Paramètres,2015-01-13,2,['43.040.10'],ISO/TC 22/SC 31,9599,[33660],[78386],['en'],67,"ISO 16844-7:2014 specifies the parameters used in the interchange of digital information between a road vehicle's tachograph system and vehicle units or a diagnostic tester, or within the tachograph system itself. The parameters are applicable for normal communication and/or diagnostic services. Parameters included in this part of ISO 16844 rely in particular on regulations stated in References [2] and [3].
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16845-2:2014 - **Identifier:** ISO 16845-2:2014 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Controller area network (CAN) conformance test plan — Part 2: High-speed medium access unit with selective wake-up functionality _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16845-2:2018 - **Withdrawn / published date:** 2014-11-04 _(verified: appears in the quote below)_ > 59504,IS,,ISO 16845-2:2014,Road vehicles — Controller area network (CAN) conformance test plan — Part 2: High-speed medium access unit with selective wake-up functionality,Véhicules routiers — Gestionnaire de réseau de communication (CAN) plan d'essai de conformité — Partie 2: Unité d'accès au médium haute vitesse avec fonctionnalité de réveil sélectif,2014-11-04,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[69841],['en'],105,ISO 16845-2:2014 establishes test cases and test requirements to realize a test plan verifying if the CAN transceiver with implemented selective wake-up functions conform to the specified functionalities. The kind of testing defined in ISO 16845-2:2014 is named as conforman Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16845:2004 - **Identifier:** ISO 16845:2004 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Controller area network (CAN) — Conformance test plan _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16845-1:2016 - **Withdrawn / published date:** 2004-03-03 _(verified: appears in the quote below)_ > 30478,IS,,ISO 16845:2004,Road vehicles — Controller area network (CAN) — Conformance test plan,Véhicules routiers — Gestionnaire de réseau de communication (CAN) — Plan d'essai de conformité,2004-03-03,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[59166],"['en','fr']",77,
ISO 16845:2004 provides the methodology and abstract test suite necessary for checking the conformance of any CAN implementation of the CAN specified in ISO 11898-1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16847:2016 - **Identifier:** ISO 16847:2016 _(verified: appears in the quote below)_ - **Item title:** Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16847:2025 - **Withdrawn / published date:** 2016-12-05 _(verified: appears in the quote below)_ > 57817,IS,,ISO 16847:2016,Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing,Textiles — Méthode d'essai pour l'évaluation de l'aspect du moutonnement des étoffes grattées après nettoyage,2016-12-05,1,['59.080.30'],ISO/TC 38/SC 2,9599,,[88347],"['en','fr']",4,"ISO 16847:2016 specifies a method for assessing the matting appearance of the napped fabrics (fleece fabrics) tested, after one or several cleansing treatments.
This method has been developed for use primarily with Type B domestic washing machines, as defined in ISO 6330, in the cleansing process. However, it is possible to use it with Type A machines, as defined in ISO 6330. This test Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16851:2004 - **Identifier:** ISO 16851:2004 _(verified: appears in the quote below)_ - **Item title:** Textile conveyor belts — Determination of the net length of an endless (spliced) conveyor belt _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16851:2012 - **Withdrawn / published date:** 2004-12-13 _(verified: appears in the quote below)_ > 30484,IS,,ISO 16851:2004,Textile conveyor belts — Determination of the net length of an endless (spliced) conveyor belt,Courroies transporteuses à carcasse textile — Méthode de mesurage de la longueur nette d'une courroie transporteuse sans fin (jonctionnée),2004-12-13,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[61049],"['en','fr']",3,
ISO 16851:2004 specifies a test method for determining the net length of an endless (spliced) conveyor belt.
It applies to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement. It is not suitable or valid for light conveyor belts as described in ISO 21183-1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16852:2008 - **Identifier:** ISO 16852:2008 _(verified: appears in the quote below)_ - **Item title:** Flame arresters — Performance requirements, test methods and limits for use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16852:2016 - **Withdrawn / published date:** 2008-02-21 _(verified: appears in the quote below)_ > 38139,IS,,ISO 16852:2008,"Flame arresters — Performance requirements, test methods and limits for use","Arrête-flammes — Exigences de performance, méthodes d'essai et limites d'utilisation",2008-02-21,1,['13.220.10'],ISO/TC 21,9599,,[61649],"['en','fr']",47,"ISO 16852:2008 specifies the requirements for flame arresters that prevent flame transmission when explosive gas-air or vapour-air mixtures are present. It establishes uniform principles for the classification, basic construction and information for use, including the marking of flame arresters, and specifies test methods to verify the safety requirements and determine safe limits of use.
ISO 16852:2008 is valid for pressures ra Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16852:2008/Cor 1:2008 - **Identifier:** ISO 16852:2008/Cor 1:2008 _(verified: appears in the quote below)_ - **Item title:** Flame arresters — Performance requirements, test methods and limits for use — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16852:2016 - **Withdrawn / published date:** 2008-12-03 _(verified: appears in the quote below)_ > 53017,IS,Cor,ISO 16852:2008/Cor 1:2008,"Flame arresters — Performance requirements, test methods and limits for use — Technical Corrigendum 1","Arrête-flammes — Exigences de performance, méthodes d'essai et limites d'utilisation — Rectificatif technique 1",2008-12-03,1,['13.220.10'],ISO/TC 21,9599,,[61649],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16852:2008/Cor 2:2009 - **Identifier:** ISO 16852:2008/Cor 2:2009 _(verified: appears in the quote below)_ - **Item title:** Flame arresters — Performance requirements, test methods and limits for use — Technical Corrigendum 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16852:2016 - **Withdrawn / published date:** 2009-06-30 _(verified: appears in the quote below)_ > 54706,IS,Cor,ISO 16852:2008/Cor 2:2009,"Flame arresters — Performance requirements, test methods and limits for use — Technical Corrigendum 2","Arrête-flammes — Exigences de performance, méthodes d'essai et limites d'utilisation — Rectificatif technique 2",2009-06-30,1,['13.220.10'],ISO/TC 21,9599,,[61649],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16852:2016 - **Identifier:** ISO 16852:2016 _(verified: appears in the quote below)_ - **Item title:** Flame arresters — Performance requirements, test methods and limits for use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 80079-49:2024 - **Withdrawn / published date:** 2016-10-14 _(verified: appears in the quote below)_ > 61649,IS,,ISO 16852:2016,"Flame arresters — Performance requirements, test methods and limits for use","Arrête-flammes — Exigences de performance, méthodes d'essai et limites d'utilisation",2016-10-14,2,['13.220.10'],ISO/TC 21,9599,"[53017,38139,54706]",[83357],"['en','fr']",50,"
ISO 16852:2016 specifies the requirements for flame arresters that prevent flame transmission when explosive gas-air or vapour-air mixtures are present. It establishes uniform principles for the classification, basic construction and information for use, including the marking of flame arresters, and specifies test methods to verify the safety requirements and determine safe limits of use.
This International Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16853:2003 - **Identifier:** ISO 16853:2003 _(verified: appears in the quote below)_ - **Item title:** Textile machinery — Sliver cans, rectangular — Main dimensions and tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16853:2010 - **Withdrawn / published date:** 2003-10-14 _(verified: appears in the quote below)_ > 32463,IS,,ISO 16853:2003,"Textile machinery — Sliver cans, rectangular — Main dimensions and tolerances","Matériel pour l'industrie textile — Pots pour rubans, rectangulaires — Dimensions principales et tolérances",2003-10-14,1,['59.120.10'],ISO/TC 72/SC 1,9599,,[44928],"['en','fr']",3,"
ISO 16853:2003 specifies the main dimensions, with tolerances, of rectangular sliver cans used in the textile industry. It also gives information about the right-angle position of cans.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16869:2001 - **Identifier:** ISO 16869:2001 _(verified: appears in the quote below)_ - **Item title:** Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16869:2008 - **Withdrawn / published date:** 2001-11-22 _(verified: appears in the quote below)_ > 30485,IS,,ISO 16869:2001,Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations,Plastiques — Évaluation de l'efficacité des composés fongistatiques dans les formulations de plastiques,2001-11-22,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[45066],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16872:2008 - **Identifier:** ISO 16872:2008 _(verified: appears in the quote below)_ - **Item title:** Short link chains for lifting purposes — Grade VH, fine tolerance for manually operated chain hoists _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16872:2015 - **Withdrawn / published date:** 2008-08-04 _(verified: appears in the quote below)_ > 40423,IS,,ISO 16872:2008,"Short link chains for lifting purposes — Grade VH, fine tolerance for manually operated chain hoists","Chaînes de levage à maillons courts — Classe VH, tolérance fine pour palans manuels à chaînes",2008-08-04,1,['53.020.30'],ISO/TC 111/SC 1,9599,,[61060],"['en','fr']",13,"ISO 16872:2008 specifies the requirements for Grade VH, fine‑tolerance hoist chains, for use as load chains in manually operated chain hoists.
It is applicable to these round steel short link chains, electrically welded and heat treated, tested to and compliant with the ISO 1834 general conditions of acceptance.
The range of nominal sizes of hoist chains covered by ISO 16872:2008 is Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16873:2002 - **Identifier:** ISO 16873:2002 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Pressure switches — Mounting surfaces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16873:2011 - **Withdrawn / published date:** 2002-04-25 _(verified: appears in the quote below)_ > 30489,IS,,ISO 16873:2002,Hydraulic fluid power — Pressure switches — Mounting surfaces,Transmissions hydrauliques — Pressostats — Plans de pose,2002-04-25,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[53398],"['en','fr']",5,
ISO 16783:2002 specifies the mounting surfaces for pressure switches and gives guidelines for the standardized arrangement of the connections for pressure switches and for the mounting of plates and hydraulic valves.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16873:2002/Amd 1:2005 - **Identifier:** ISO 16873:2002/Amd 1:2005 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Pressure switches — Mounting surfaces — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16873:2011 - **Withdrawn / published date:** 2005-04-25 _(verified: appears in the quote below)_ > 40309,IS,Amd,ISO 16873:2002/Amd 1:2005,Hydraulic fluid power — Pressure switches — Mounting surfaces — Amendment 1,Transmissions hydrauliques — Pressostats — Plans de pose — Amendement 1,2005-04-25,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[53398],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16877:2008 - **Identifier:** ISO 16877:2008 _(verified: appears in the quote below)_ - **Item title:** Short link chains for lifting purposes — Grade TH, fine tolerance for manually operated chain hoists _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16877:2015 - **Withdrawn / published date:** 2008-08-04 _(verified: appears in the quote below)_ > 40424,IS,,ISO 16877:2008,"Short link chains for lifting purposes — Grade TH, fine tolerance for manually operated chain hoists","Chaînes de levage à maillons courts — Classe TH, tolérance fine pour palans manuels à chaînes",2008-08-04,1,['53.020.30'],ISO/TC 111/SC 1,9599,,[61061],"['en','fr']",13,"ISO 16877:2008 specifies the requirements for fine-tolerance Grade TH hoist chains, for use as load chains in manually operated chain hoists.
It is applicable to these round steel short link chains, electrically welded and heat treated, tested to and compliant with the ISO 1834 general conditions of acceptance.
The range of nominal sizes of hoist chains covered by ISO 16877:2008 is f Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16881-1:2005 - **Identifier:** ISO 16881-1:2005 _(verified: appears in the quote below)_ - **Item title:** Cranes — Design calculation for rail wheels and associated trolley track supporting structure — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16881-1:2024 | ISO/CD 16881-1 - **Withdrawn / published date:** 2005-06-08 _(verified: appears in the quote below)_ > 38151,IS,,ISO 16881-1:2005,Cranes — Design calculation for rail wheels and associated trolley track supporting structure — Part 1: General,Appareils de levage à charge suspendue — Calcul de conception des galets et de la structure de support du chariot de roulement — Partie 1: Généralités,2005-06-08,1,['53.020.20'],ISO/TC 96/SC 10,9599,,"[84932,75455]","['en','fr']",13,
ISO 16881-1:2005 gives the requirements for the selection of the size for iron or steel wheels and presents the formulae for the local stresses in crane structures due to the effects of the wheel loads.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16889:1999 - **Identifier:** ISO 16889:1999 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power filters — Multi-pass method for evaluating filtration performance of a filter element _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16889:2008 - **Withdrawn / published date:** 1999-12-16 _(verified: appears in the quote below)_ > 10495,IS,,ISO 16889:1999,Hydraulic fluid power filters — Multi-pass method for evaluating filtration performance of a filter element,Filtres pour transmissions hydrauliques — Évaluation des performances par la méthode de filtration en circuit fermé,1999-12-16,1,['23.100.60'],ISO/TC 131/SC 6,9599,[10494],[44870],"['en','fr']",46, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16889:2008 - **Identifier:** ISO 16889:2008 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16889:2022 - **Withdrawn / published date:** 2008-06-03 _(verified: appears in the quote below)_ > 44870,IS,,ISO 16889:2008,Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element,Transmissions hydrauliques — Filtres — Évaluation des performances par la méthode de filtration en circuit fermé,2008-06-03,2,['23.100.60'],ISO/TC 131/SC 6,9599,[10495],[77245],"['en','fr']",41,"ISO 16889:2008 describes a multi-pass filtration performance test with continuous contaminant injection for hydraulic fluid power filter elements; a procedure for determining the contaminant capacity, particulate removal and differential pressure characteristics; a test currently applicable to hydraulic fluid power filter elements that exhibit an average filtration Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16889:2008/Amd 1:2018 - **Identifier:** ISO 16889:2008/Amd 1:2018 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16889:2022 - **Withdrawn / published date:** 2018-11-28 _(verified: appears in the quote below)_ > 74774,IS,Amd,ISO 16889:2008/Amd 1:2018,Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element — Amendment 1,Transmissions hydrauliques — Filtres — Évaluation des performances par la méthode de filtration en circuit fermé — Amendement 1,2018-11-28,2,['23.100.60'],ISO/TC 131/SC 6,9599,,[77245],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16890-2:2016 - **Identifier:** ISO 16890-2:2016 _(verified: appears in the quote below)_ - **Item title:** Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16890-2:2022 - **Withdrawn / published date:** 2016-11-28 _(verified: appears in the quote below)_ > 57865,IS,,ISO 16890-2:2016,Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance,Filtres à air de ventilation générale — Partie 2: Mesurage de l'efficacité spectrale et de la résistance à l'écoulement de l'air,2016-11-28,1,['91.140.30'],ISO/TC 142,9599,[54069],[79591],"['en','fr']",59,"
ISO 16890-2:2016 specifies the aerosol production, the test equipment and the test methods used for measuring fractional efficiency and air flow resistance of air filters for general ventilation.
It is intended for use in conjunction with ISO 16890‑1, ISO 16890‑3 and ISO 16890‑4.
The test method described in this part of ISO 16890 is applicabl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16890-3:2016 - **Identifier:** ISO 16890-3:2016 _(verified: appears in the quote below)_ - **Item title:** Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16890-3:2024 - **Withdrawn / published date:** 2016-11-28 _(verified: appears in the quote below)_ > 57866,IS,,ISO 16890-3:2016,Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured,Filtres à air de ventilation générale — Partie 3: Détermination de l'efficacité gravimétrique et de la résistance à l'écoulement de l'air par rapport à la quantité de poussière d'essai retenue,2016-11-28,1,['91.140.30'],ISO/TC 142,9599,[54069],[83047],"['en','fr']",21,"
ISO 16890-3:2016 specifies the test equipment and the test methods used for measuring the gravimetric efficiency and resistance to air flow of air filter for general ventilation.
It is intended for use in conjunction with ISO 16890‑1, ISO Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16890-4:2016 - **Identifier:** ISO 16890-4:2016 _(verified: appears in the quote below)_ - **Item title:** Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16890-4:2022 - **Withdrawn / published date:** 2016-11-28 _(verified: appears in the quote below)_ > 57867,IS,,ISO 16890-4:2016,Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency,Filtres à air de ventilation générale — Partie 4: Méthode de conditionnement afin de déterminer l'efficacité spectrale minimum d'essai,2016-11-28,1,['91.140.30'],ISO/TC 142,9599,[54069],[79593],"['en','fr']",11,"
ISO 16890-4:2016 establishes a conditioning method to determine the minimum fractional test efficiency.
It is intended for use in conjunction with ISO 16890‑1, ISO 16890‑2 and ISO 16890‑3, and provides the related test requirements for the test device and conditioning cabinet as well as the conditioning procedure to follow.
Th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16893-1:2008 - **Identifier:** ISO 16893-1:2008 _(verified: appears in the quote below)_ - **Item title:** Wood-based panels — Particleboard — Part 1: Classifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16893:2016 - **Withdrawn / published date:** 2008-03-04 _(verified: appears in the quote below)_ > 32474,IS,,ISO 16893-1:2008,Wood-based panels — Particleboard — Part 1: Classifications,Panneaux à base de bois — Panneaux de particules — Partie 1: Classifications,2008-03-04,1,['79.060.20'],ISO/TC 89/SC 2,9599,,[60033],['en'],5,"
ISO 16893-1:2008 specifies a classification matrix and the related mandatory tests and thickness ranges to be applied to particleboard for general purposes, furniture, load-bearing applications, and heavy-duty load-bearing applications.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16893-2:2010 - **Identifier:** ISO 16893-2:2010 _(verified: appears in the quote below)_ - **Item title:** Wood-based panels — Particleboard — Part 2: Requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16893:2016 - **Withdrawn / published date:** 2010-10-28 _(verified: appears in the quote below)_ > 32479,IS,,ISO 16893-2:2010,Wood-based panels — Particleboard — Part 2: Requirements,Panneaux à base de bois — Panneaux de particules — Partie 2: Exigences,2010-10-28,1,['79.060.20'],ISO/TC 89/SC 2,9599,,[60033],['en'],16,ISO 16893-2:2010 provides the manufacturing property requirements for uncoated particleboard.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16895-1:2008 - **Identifier:** ISO 16895-1:2008 _(verified: appears in the quote below)_ - **Item title:** Wood-based panels — Dry-process fibreboard — Part 1: Classifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16895:2016 - **Withdrawn / published date:** 2008-03-04 _(verified: appears in the quote below)_ > 32476,IS,,ISO 16895-1:2008,Wood-based panels — Dry-process fibreboard — Part 1: Classifications,Panneaux à base de bois — Panneaux de fibres obtenus par procédé à sec — Partie 1: Classifications,2008-03-04,1,['79.060.20'],ISO/TC 89/SC 1,9599,,[60032],['en'],8,"ISO 16895-1:2008 specifies a classification matrix, related mandatory tests and thickness ranges for ultra-low-, low-, medium-, and high-density dry process fibreboard.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16895-2:2010 - **Identifier:** ISO 16895-2:2010 _(verified: appears in the quote below)_ - **Item title:** Wood-based panels — Dry-process fibreboard — Part 2: Requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16895:2016 - **Withdrawn / published date:** 2010-10-28 _(verified: appears in the quote below)_ > 32485,IS,,ISO 16895-2:2010,Wood-based panels — Dry-process fibreboard — Part 2: Requirements,Panneaux à base de bois — Panneaux de fibres obtenus par procédé à sec — Partie 2: Exigences,2010-10-28,1,['79.060.20'],ISO/TC 89/SC 1,9599,,[60032],['en'],22,ISO 16895-2:2010 provides the manufacturing property requirements for uncoated dry-process fibreboard.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16900-1:2014 - **Identifier:** ISO 16900-1:2014 _(verified: appears in the quote below)_ - **Item title:** Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16900-1:2019 - **Withdrawn / published date:** 2014-10-16 _(verified: appears in the quote below)_ > 38803,IS,,ISO 16900-1:2014,Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage,Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 1: Détermination des fuites vers l'intérieur,2014-10-16,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[73233],"['en','fr']",34,"ISO 16900-1:2014 specifies the test methods for determining inward leakage of respiratory interfaces (RI) and total inward leakage of complete respiratory protective devices (RPD) using specified test agents and incorporating specified body movements, at specified metabolic work rates.
These tests are conducted in laboratories using specific tes Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16900-11:2013 - **Identifier:** ISO 16900-11:2013 _(verified: appears in the quote below)_ - **Item title:** Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16900-11:2025 | ISO/PWI 16900-11 - **Withdrawn / published date:** 2013-10-11 _(verified: appears in the quote below)_ > 52484,IS,,ISO 16900-11:2013,Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision,Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 11: Détermination du champ de vision,2013-10-11,1,['13.340.30'],ISO/TC 94/SC 15,9599,,"[86684,78196]","['en','fr']",11,
ISO 16900-11:2013 specifies the laboratory test method for determining the field of vision for a respiratory protective device (RPD).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16900-14:2015 - **Identifier:** ISO 16900-14:2015 _(verified: appears in the quote below)_ - **Item title:** Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16900-14:2020 - **Withdrawn / published date:** 2015-11-03 _(verified: appears in the quote below)_ > 63137,IS,,ISO 16900-14:2015,Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level,Appareils de protection respiratoire — Méthodes d'essai et équipment d'essai — Partie 14: Mesurage du niveau sonore,2015-11-03,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[73234],"['en','fr']",7,ISO 16900-14:2015 specifies a laboratory test method for determining the sound level generated by the complete respiratory protective device (RPD) and RPD warning sounds measured on a headform to which the RPD is fitted.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16900-2:2009 - **Identifier:** ISO 16900-2:2009 _(verified: appears in the quote below)_ - **Item title:** Respiratory protective devices — Methods of test and test equipment — Part 2: Determination of breathing resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16900-2:2017 - **Withdrawn / published date:** 2009-07-07 _(verified: appears in the quote below)_ > 38875,IS,,ISO 16900-2:2009,Respiratory protective devices — Methods of test and test equipment — Part 2: Determination of breathing resistance,Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 2: Détermination de la résistance respiratoire,2009-07-07,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[72530],"['en','fr']",14,ISO 16900-2:2009 specifies the method(s) of test for breathing resistance for:
ISO 16900-6:2015 specifies the method of test for the mechanical resistance and strength of components of respiratory protective devices.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16900-7:2015 - **Identifier:** ISO 16900-7:2015 _(verified: appears in the quote below)_ - **Item title:** Respiratory protective devices — Methods of test and test equipment — Part 7: Practical performance test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16900-7:2020 - **Withdrawn / published date:** 2015-09-17 _(verified: appears in the quote below)_ > 52480,IS,,ISO 16900-7:2015,Respiratory protective devices — Methods of test and test equipment — Part 7: Practical performance test methods,Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 7: Essai de performance pratique,2015-09-17,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[75876],"['en','fr']",8,"ISO 16900-7:2015 specifies practical performance tests for respiratory protective devices (RPD). The purpose of these tests is to subjectively assess certain properties, characteristics, and functions of the RPD when worn by test subjects in simulated practical use, which cannot be assessed by tests described in other standards.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16916:2004 - **Identifier:** ISO 16916:2004 _(verified: appears in the quote below)_ - **Item title:** Tools for moulding — Tool specification sheet for injection moulds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16916:2016 - **Withdrawn / published date:** 2004-03-15 _(verified: appears in the quote below)_ > 32499,IS,,ISO 16916:2004,Tools for moulding — Tool specification sheet for injection moulds,Outillage de moulage — Formulaire de spécifications d'outils pour moules d'injection,2004-03-15,1,['25.120.30'],ISO/TC 29/SC 8,9599,,[68883],"['en','fr']",8,"ISO 16916:2004 defines the description and specification of injection moulds to be used when requesting tools (stage of tender) and ordering tools. This International Standard gives data for material acquisition, equipment, structural design of injection moulds including the surfaces of the tool. Information relating to machine-specific data, types of operation and warranty is also contained in this specification sheet.
ISO 16916:2004 do Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16919:2014 - **Identifier:** ISO 16919:2014 _(verified: appears in the quote below)_ - **Item title:** Space data and information transfer systems — Requirements for bodies providing audit and certification of candidate trustworthy digital repositories _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16919:2025 - **Withdrawn / published date:** 2014-10-29 _(verified: appears in the quote below)_ > 57950,IS,,ISO 16919:2014,Space data and information transfer systems — Requirements for bodies providing audit and certification of candidate trustworthy digital repositories,Systèmes de transfert des informations et données spatiales — Exigences pour les organismes d'audit et de certification des référentiels numériques potentiellement de confiance,2014-10-29,1,"['03.120.20','49.140']",ISO/TC 20/SC 13,9599,,[87473],['en'],22,"
ISO 16919:2014 is meant primarily for those setting up and managing the organization performing the auditing and certification of digital repositories.
It should also be of use to those who work in or are responsible for digital repositories seeking objective Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16923:2016 - **Identifier:** ISO 16923:2016 _(verified: appears in the quote below)_ - **Item title:** Natural gas fuelling stations — CNG stations for fuelling vehicles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16923:2026 - **Withdrawn / published date:** 2016-12-13 _(verified: appears in the quote below)_ > 57959,IS,,ISO 16923:2016,Natural gas fuelling stations — CNG stations for fuelling vehicles,Stations-service de gaz naturel — Stations GNC pour le ravitaillement de véhicules,2016-12-13,1,['75.200'],ISO/TC 340,9599,,[85907],"['en','fr']",43,"
ISO 16923:2016 covers the design, construction, operation, inspection and maintenance of stations for fuelling compressed natural gas (CNG) to vehicles, including equipment, safety and control devices.
ISO 16923:2016 also applies to portions of a fuelling station where natural gas is in a gaseous state and dispensing CNG derived from liquefied natural gas (LCNG) according to ISO 16924.
ISO 16923:2016 applies to fuelling stations supplied w Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16924:2016 - **Identifier:** ISO 16924:2016 _(verified: appears in the quote below)_ - **Item title:** Natural gas fuelling stations — LNG stations for fuelling vehicles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16924:2026 - **Withdrawn / published date:** 2016-12-01 _(verified: appears in the quote below)_ > 57960,IS,,ISO 16924:2016,Natural gas fuelling stations — LNG stations for fuelling vehicles,Stations-service de gaz naturel — Stations GNL pour le ravitaillement de véhicules,2016-12-01,1,['75.200'],ISO/TC 340,9599,,[85908],"['en','fr']",77,"
ISO 16924:2016 specifies the design, construction, operation, maintenance and inspection of stations for fuelling liquefied natural gas (LNG) to vehicles, including equipment, safety and control devices.
ISO 16924:2016 also specifies the design, construction, operation, maintenance and inspection of fuelling stations for using LNG as an onsite source for fuelling CNG to vehicles (LCNG fuelling stations), including safety and control devices of t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16925:2014 - **Identifier:** ISO 16925:2014 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16925:2021 - **Withdrawn / published date:** 2014-02-05 _(verified: appears in the quote below)_ > 57970,IS,,ISO 16925:2014,Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting,Peintures et vernis — Détermination de la résistance des revêtements à un jet d'eau sous pression,2014-02-05,1,['87.040'],ISO/TC 35/SC 9,9599,,[81409],"['en','fr','ru']",17,
ISO 16925:2014 specifies a test method for the assessment of the resistance of coatings to pressure water-jetting. The test method simulates the effects pressure water-jetting has on a coating.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16929:2002 - **Identifier:** ISO 16929:2002 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16929:2013 - **Withdrawn / published date:** 2002-11-08 _(verified: appears in the quote below)_ > 30508,IS,,ISO 16929:2002,Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test,Plastiques — Détermination du degré de désintégration des matériaux plastiques dans des conditions de compostage définies lors d'un essai à échelle pilote,2002-11-08,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[62948],"['en','fr']",10,"This International Standard is used to determine the degree of disintegration of plastic materials in a pilot-scale aerobic composting test under defined conditions. The test method laid down in this standard can also be used to determine the influence of the test material on the composting process and the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16929:2013 - **Identifier:** ISO 16929:2013 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16929:2019 - **Withdrawn / published date:** 2013-04-05 _(verified: appears in the quote below)_ > 62948,IS,,ISO 16929:2013,Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test,Plastiques — Détermination du degré de désintégration des matériaux plastiques dans des conditions de compostage définies lors d'un essai à échelle pilote,2013-04-05,2,['83.080.01'],ISO/TC 61/SC 14,9599,[30508],[72473],"['en','fr']",10,
ISO 16929:2013 is used to determine the degree of disintegration of plastic materials in a pilot-scale aerobic composting test under defined conditions. It forms part of an overall scheme for the evaluation of the compostability of plastics as outlined in ISO 17088. The test method laid down in ISO Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16929:2019 - **Identifier:** ISO 16929:2019 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16929:2021 - **Withdrawn / published date:** 2019-10-25 _(verified: appears in the quote below)_ > 72473,IS,,ISO 16929:2019,Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test,Plastiques — Détermination du degré de désintégration des matériaux plastiques dans des conditions de compostage définies lors d'un essai à échelle pilote,2019-10-25,3,['83.080.01'],ISO/TC 61/SC 14,9599,[62948],[80302],"['en','fr']",10,"
This document is used to determine the degree of disintegration of plastic materials in a pilot-scale aerobic composting test under defined conditions. It forms part of an overall scheme for the evaluation of the compostability of plastics as outlined in ISO 17088.
The test method laid down Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16931:2001 - **Identifier:** ISO 16931:2001 _(verified: appears in the quote below)_ - **Item title:** Animal and vegetable fats and oils — Determination of polymerized triglycerides by high-performance size-exclusion chromatography (HPSEC) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16931:2009 - **Withdrawn / published date:** 2001-10-04 _(verified: appears in the quote below)_ > 30509,IS,,ISO 16931:2001,Animal and vegetable fats and oils — Determination of polymerized triglycerides by high-performance size-exclusion chromatography (HPSEC),Corps gras d'origines animale et végétale — Détermination de la teneur en triglycérides polymérisés par chromatographie liquide d'exclusion à haute performance (CLHP d'exclusion),2001-10-04,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[44881],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16932:2007 - **Identifier:** ISO 16932:2007 _(verified: appears in the quote below)_ - **Item title:** Glass in building — Destructive-windstorm-resistant security glazing — Test and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16932:2016 - **Withdrawn / published date:** 2007-07-04 _(verified: appears in the quote below)_ > 38165,IS,,ISO 16932:2007,Glass in building — Destructive-windstorm-resistant security glazing — Test and classification,Verre dans la construction — Vitrages de sécurité résistant aux tempêtes destructrices — Essai et classification,2007-07-04,1,['81.040.20'],ISO/TC 160,9599,,[61766],"['en','fr']",17,"
ISO 16932:2007 determines resistance of security glazing products to natural threats characterized by simulated destructive-windstorm events. Classification is intended as basis for judging the ability of glazing to remain without openings during a severe tropical cyclone with sustained wind speed of 50 m/s or greater. Impact by missile(s) and subsequent cyclic static-pressure differentials Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16932:2016 - **Identifier:** ISO 16932:2016 _(verified: appears in the quote below)_ - **Item title:** Glass in building — Destructive-windstorm-resistant security glazing — Test and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16932:2020 | ISO/NP 16932 - **Withdrawn / published date:** 2016-03-03 _(verified: appears in the quote below)_ > 61766,IS,,ISO 16932:2016,Glass in building — Destructive-windstorm-resistant security glazing — Test and classification,Verre dans la construction — Vitrages de protection résistant aux tempêtes destructrices — Essai et classification,2016-03-03,2,['81.040.20'],ISO/TC 160,9599,[38165],"[75041,72649]","['en','fr']",19,"
ISO 16932:2016 determines resistance of security glazing products to natural threats characterized by simulated destructive-windstorm events. Classification is intended as a basis for judging the ability of glazing to remain essentially without openings during a tropical cyclone with wind speed of 50 m/s or greater. Impact by missile(s) and subsequent cyclic static-pressure Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16936-1:2005 - **Identifier:** ISO 16936-1:2005 _(verified: appears in the quote below)_ - **Item title:** Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16936-1:2020 | ISO/NP 16936-1 - **Withdrawn / published date:** 2005-06-22 _(verified: appears in the quote below)_ > 38169,IS,,ISO 16936-1:2005,Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop,Verre dans la construction — Vitrages de sécurité contre infractions — Partie 1: Essai et classification par balle lancée répétée,2005-06-22,1,['81.040.20'],ISO/TC 160,9599,,"[75209,70328]",['en'],8,
ISO 16936-1:2005 specifies requirements and a test method for security glazing designed to resist impacts of a hard body by delaying access of objects and/or persons to a protected space for a short period of time.
ISO 16936-1:2005 classifies security-glazing products into categories of resistance to repetitive impacts of a steel sphere. The categories Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16938-1:2008 - **Identifier:** ISO 16938-1:2008 _(verified: appears in the quote below)_ - **Item title:** Building construction — Determination of the staining of porous substrates by sealants used in joints — Part 1: Test with compression _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16938-1:2019 - **Withdrawn / published date:** 2008-03-07 _(verified: appears in the quote below)_ > 32506,IS,,ISO 16938-1:2008,Building construction — Determination of the staining of porous substrates by sealants used in joints — Part 1: Test with compression,Construction immobilière — Détermination du tachage des supports poreux par les mastics utilisés dans les joints — Partie 1: Essai avec compression,2008-03-07,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[72636],"['en','fr','ru']",8,"
ISO 16938-1:2008 specifies a method for determining the staining of porous substrates (e.g. marble, limestone, sandstone or granite) by sealants used in building construction. The method evaluates the likelihood of a sealant causing an early stain on a porous substrate due to exudation of materials from the s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16938-2:2008 - **Identifier:** ISO 16938-2:2008 _(verified: appears in the quote below)_ - **Item title:** Building construction — Determination of the staining of porous substrates by sealants used in joints — Part 2: Test without compression _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16938-2:2019 - **Withdrawn / published date:** 2008-03-07 _(verified: appears in the quote below)_ > 35008,IS,,ISO 16938-2:2008,Building construction — Determination of the staining of porous substrates by sealants used in joints — Part 2: Test without compression,Construction immobilière — Détermination du tachage des supports poreux par les mastics utilisés dans les joints — Partie 2: Essai sans compression,2008-03-07,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[72637],"['en','fr','ru']",7,"
ISO 16938-2:2008 specifies a method for determining the staining of porous substrates (e.g. marble, limestone, sandstone, or granite) by sealants used in building construction. The method evaluates the likelihood of a sealant causing an early stain on a porous substrate due to exudation of materials from t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 58](https://referencesource.org/iso-standard-supersessions/p/58/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 60](https://referencesource.org/iso-standard-supersessions/p/60/) Last verified: 2026-08-05. Review by: 2027-02-02.