ISO 12742:2007 specifies a flow-table method for the determination of the transportable moisture limit (TML) of copper, lead and zinc sulfide concentrates, which may liquefy during transport.
ISO 12742:2007 is applicable to the determination of the TML of concentrates containing 10 % to 80 % (mass fraction) of lead, or 10 % to 65 % (mass f Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12743:1998 - **Identifier:** ISO 12743:1998 _(verified: appears in the quote below)_ - **Item title:** Copper, lead and zinc sulfide concentrates — Sampling procedures for determination of metal and moisture content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12743:2006 - **Withdrawn / published date:** 1998-04-30 _(verified: appears in the quote below)_ > 2655,IS,,ISO 12743:1998,"Copper, lead and zinc sulfide concentrates — Sampling procedures for determination of metal and moisture content","Concentrés sulfurés de cuivre, de plomb et de zinc — Procédures d'échantillonnage pour la détermination de la teneur en métal et de l'humidité",1998-04-30,1,['73.060.99'],ISO/TC 183,9599,,[40697],['en'],72, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12743:2006 - **Identifier:** ISO 12743:2006 _(verified: appears in the quote below)_ - **Item title:** Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12743:2018 - **Withdrawn / published date:** 2006-06-19 _(verified: appears in the quote below)_ > 40697,IS,,ISO 12743:2006,"Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content","Concentrés de cuivre, de plomb, de zinc et de nickel — Procédures d'échantillonnage pour la détermination de la teneur en métal et de l'humidité",2006-06-19,2,['73.060.99'],ISO/TC 183,9599,[2655],[69467],['en'],77,"
ISO 12743:2006 sets out the basic methods for sampling copper, lead, zinc and nickel concentrates from moving streams and stationary lots, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content, in accordance with the relevant International Standards.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12743:2018 - **Identifier:** ISO 12743:2018 _(verified: appears in the quote below)_ - **Item title:** Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12743:2021 - **Withdrawn / published date:** 2018-06-08 _(verified: appears in the quote below)_ > 69467,IS,,ISO 12743:2018,"Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content","Concentrés de cuivre, de plomb, de zinc et de nickel — Procédures d'échantillonnage pour la détermination de la teneur en métal et de l'humidité",2018-06-08,3,['73.060.99'],ISO/TC 183,9599,[40697],[81126],['en'],78,"This document sets out the basic methods for sampling copper, lead, zinc and nickel concentrates from moving streams and stationary lots, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content, in accordance with the relevant International Standards. Where the conc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12744:1997 - **Identifier:** ISO 12744:1997 _(verified: appears in the quote below)_ - **Item title:** Copper, lead and zinc sulfide concentrates — Experimental methods for checking the precision of sampling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12744:2006 - **Withdrawn / published date:** 1997-05-01 _(verified: appears in the quote below)_ > 22318,IS,,ISO 12744:1997,"Copper, lead and zinc sulfide concentrates — Experimental methods for checking the precision of sampling","Concentrés sulfurés de cuivre, de plomb et de zinc — Méthodes expérimentales de contrôle de la fidélité de l'échantillonnage",1997-05-01,1,['73.060.99'],ISO/TC 183,9599,,[41317],['en'],12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12744:2006 - **Identifier:** ISO 12744:2006 _(verified: appears in the quote below)_ - **Item title:** Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12744:2025 - **Withdrawn / published date:** 2006-04-19 _(verified: appears in the quote below)_ > 41317,IS,,ISO 12744:2006,"Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling","Concentrés de cuivre, de plomb, de zinc et de nickel — Méthodes expérimentales de contrôle de la fidélité de l'échantillonnage",2006-04-19,2,['73.060.99'],ISO/TC 183,9599,[22318],[81916],['en'],15,"
ISO 12744:2006 specifies methods for checking the precision of primary sampling, sample processing, chemical analysis, physical testing and determination of moisture content of copper, lead, zinc and nickel concentrates being carried out in accordance with the methods specified in ISO 12743, expressed in terms of standard deviations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12745:1996 - **Identifier:** ISO 12745:1996 _(verified: appears in the quote below)_ - **Item title:** Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12745:2008 - **Withdrawn / published date:** 1996-06-20 _(verified: appears in the quote below)_ > 2651,IS,,ISO 12745:1996,"Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques","Minerais et concentrés de cuivre, de plomb et de zinc — Justesse et erreurs systématiques des techniques de pesée",1996-06-20,1,['73.060.99'],ISO/TC 183,9599,,[45783],['en'],34, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12749-2:2013 - **Identifier:** ISO 12749-2:2013 _(verified: appears in the quote below)_ - **Item title:** Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12749-2:2022 - **Withdrawn / published date:** 2013-09-13 _(verified: appears in the quote below)_ > 59404,IS,,ISO 12749-2:2013,"Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection","Énergie nucléaire, technologies nucléaires et protection radiologique — Vocabulaire — Partie 2: Protection radiologique",2013-09-13,1,"['13.280','01.040.13']",ISO/TC 85,9599,,[79706],['en'],35,ISO 12749-2:2013 lists unambiguous terms and definitions related to radiological protection concepts in the subject field of nuclear energy. It is intended to facilitate communication and promote common understanding.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12749-3:2015 - **Identifier:** ISO 12749-3:2015 _(verified: appears in the quote below)_ - **Item title:** Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12749-3:2024 - **Withdrawn / published date:** 2015-09-09 _(verified: appears in the quote below)_ > 61019,IS,,ISO 12749-3:2015,"Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle","Énergie nucléaire, technologies nucléaires et protection radiologique — Vocabulaire — Partie 3: Cycle de combustibles nucléaires",2015-09-09,1,"['13.280','01.040.13']",ISO/TC 85,9599,,[82724],['en'],36,"ISO 12749-3:2015 lists unambiguous terms and definitions related to nuclear fuel cycle concepts in the subject field of nuclear energy, excluding reactor operations. It is intended to facilitate communication and promote common understanding.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1275:1972 - **Identifier:** ISO 1275:1972 _(verified: appears in the quote below)_ - **Item title:** Extended pitch precision roller chains and chain wheels for transmission and conveyors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1275:1984 | ISO 1275:1995 - **Withdrawn / published date:** 1972-07-01 _(verified: appears in the quote below)_ > 5874,IS,,ISO 1275:1972,Extended pitch precision roller chains and chain wheels for transmission and conveyors,"Chaînes de précision à rouleaux à pas long et roues dentées correspondantes, pour transmission et convoyeurs",1972-07-01,1,"['21.220.30','53.040.20']",ISO/TC 100,9599,,"[5875,5876]","['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1275:1972/Amd 1:1982 - **Identifier:** ISO 1275:1972/Amd 1:1982 _(verified: appears in the quote below)_ - **Item title:** Extended pitch precision roller chains and chain wheels for transmission and conveyors — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1275:1984 | ISO 1275:1995 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 5877,IS,Amd,ISO 1275:1972/Amd 1:1982,Extended pitch precision roller chains and chain wheels for transmission and conveyors — Amendment 1,"Chaînes de précision à rouleaux à pas long et roues dentées correspondantes, pour transmission et convoyeurs — Amendement 1",1982-12-01,1,"['21.220.30','53.040.20']",ISO/TC 100,9599,,"[5875,5876]",['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1275:1984 - **Identifier:** ISO 1275:1984 _(verified: appears in the quote below)_ - **Item title:** Extended pitch precision roller chains and chain wheels for transmission and conveyors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1275:1995 - **Withdrawn / published date:** 1984-03-01 _(verified: appears in the quote below)_ > 5875,IS,,ISO 1275:1984,Extended pitch precision roller chains and chain wheels for transmission and conveyors,"Chaînes de précision à rouleaux à pas long et roues dentées correspondantes, pour transmission et convoyeurs",1984-03-01,2,"['21.220.30','53.040.20']",ISO/TC 100,9599,"[5877,5874]",[5876],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1275:1995 - **Identifier:** ISO 1275:1995 _(verified: appears in the quote below)_ - **Item title:** Double-pitch precision roller chains and sprockets for transmission and conveyors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1275:2006 - **Withdrawn / published date:** 1995-02-23 _(verified: appears in the quote below)_ > 5876,IS,,ISO 1275:1995,Double-pitch precision roller chains and sprockets for transmission and conveyors,Chaînes de précision à rouleaux à pas double et roues dentées pour transmission et manutention,1995-02-23,3,"['21.220.30','53.040.20']",ISO/TC 100,9599,"[5877,5874,5875]",[34516],"['en','fr']",13,"Cancels and replaces the second edition (1984). Specifies requirements for double-pitch precision roller chains suitable for the mechanical transmission of power and for conveyors, together with those for their associated sprockets. Covers dimensions, tolerances, length measurement, proof testing and minimum tensile strengths. The chains are intended for use under less onerous conditions with Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12756:1998 - **Identifier:** ISO 12756:1998 _(verified: appears in the quote below)_ - **Item title:** Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12756:2016 - **Withdrawn / published date:** 1998-04-23 _(verified: appears in the quote below)_ > 27200,IS,,ISO 12756:1998,Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary,Instruments de dessin et d'écriture — Stylos à pointe bille et stylos rollers — Vocabulaire,1998-04-23,1,"['97.180','01.100.40','01.040.01','01.040.97']",ISO/TC 10,9599,,[69121],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12756:1998/Amd 1:2011 - **Identifier:** ISO 12756:1998/Amd 1:2011 _(verified: appears in the quote below)_ - **Item title:** Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary — Amendment 1: Viscosity of the writing fluid _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12756:2016 - **Withdrawn / published date:** 2011-01-28 _(verified: appears in the quote below)_ > 54335,IS,Amd,ISO 12756:1998/Amd 1:2011,Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary — Amendment 1: Viscosity of the writing fluid,Instruments de dessin et d'écriture — Stylos à pointe bille et stylos rollers — Vocabulaire — Amendement 1: Viscosité du fluide d'écriture,2011-01-28,1,"['97.180','01.100.40','01.040.01','01.040.97']",ISO/TC 10,9599,,[69121],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12757-1:1998 - **Identifier:** ISO 12757-1:1998 _(verified: appears in the quote below)_ - **Item title:** Ball point pens and refills — Part 1: General use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12757-1:2016 - **Withdrawn / published date:** 1998-05-14 _(verified: appears in the quote below)_ > 1129,IS,,ISO 12757-1:1998,Ball point pens and refills — Part 1: General use,Stylos à pointe bille et recharges — Partie 1: Utilisation générale,1998-05-14,1,['97.180'],ISO/TC 10,9599,,[69124],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12757-1:2016 - **Identifier:** ISO 12757-1:2016 _(verified: appears in the quote below)_ - **Item title:** Ball point pens and refills — Part 1: General use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12757-1:2017 - **Withdrawn / published date:** 2016-11-07 _(verified: appears in the quote below)_ > 69124,IS,,ISO 12757-1:2016,Ball point pens and refills — Part 1: General use,Stylos à pointe bille et recharges — Partie 1: Utilisation générale,2016-11-07,2,['97.180'],ISO/TC 10,9599,[1129],[73283],"['en','fr']",8,
ISO 12757-1:2016 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use.
Additional requirements for ball point pens for documentary use are given in ISO 12757‑2.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12759:2010 - **Identifier:** ISO 12759:2010 _(verified: appears in the quote below)_ - **Item title:** Fans — Efficiency classification for fans _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12759-3:2019 | ISO 12759-4:2019 - **Withdrawn / published date:** 2010-12-03 _(verified: appears in the quote below)_ > 51665,IS,,ISO 12759:2010,Fans — Efficiency classification for fans,Ventilateurs — Classification du rendement des ventilateurs,2010-12-03,1,['23.120'],ISO/TC 117,9599,,"[67574,67575]","['en','fr']",42,"ISO 12759:2010 specifies requirements for classification of fan efficiency for all fan types driven by motors with an electrical input power range from 0,125 kW to 500 kW. It is applicable to (bare shaft and driven) fans, as well as fans integrated into products. Fans integrated into products are measured as stand-alone fans.
It is not applicable to fans for smoke and emergency smoke extraction; fans for industrial processes; fans for automotive application, trains, planes, etc.; fans Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12759:2010/Amd 1:2013 - **Identifier:** ISO 12759:2010/Amd 1:2013 _(verified: appears in the quote below)_ - **Item title:** Fans — Efficiency classification for fans — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12759-3:2019 | ISO 12759-4:2019 | ISO/NP 12759 - **Withdrawn / published date:** 2013-03-25 _(verified: appears in the quote below)_ > 62986,IS,Amd,ISO 12759:2010/Amd 1:2013,Fans — Efficiency classification for fans — Amendment 1,Ventilateurs — Classification du rendement des ventilateurs — Amendement 1,2013-03-25,1,['23.120'],ISO/TC 117,9599,,"[67574,67575,66186]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12789:2000 - **Identifier:** ISO 12789:2000 _(verified: appears in the quote below)_ - **Item title:** Reference neutron radiations — Characteristics and methods of production of simulated workplace neutron fields _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12789-1:2008 - **Withdrawn / published date:** 2000-11-30 _(verified: appears in the quote below)_ > 30215,IS,,ISO 12789:2000,Reference neutron radiations — Characteristics and methods of production of simulated workplace neutron fields,Rayonnements neutroniques de référence — Caractéristiques et méthodes de production de champs de neutrons simulant ceux de postes de travail,2000-11-30,1,['17.240'],ISO/TC 85/SC 2,9599,,[46369],"['en','fr']",24, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1279:1973 - **Identifier:** ISO 1279:1973 _(verified: appears in the quote below)_ - **Item title:** Essential oils — Determination of carbonyl compounds content — Hydroxylammonium chloride method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1279:1984 | ISO 1279:1996 - **Withdrawn / published date:** 1973-04-01 _(verified: appears in the quote below)_ > 5878,IS,,ISO 1279:1973,Essential oils — Determination of carbonyl compounds content — Hydroxylammonium chloride method,Huiles essentielles — Détermination de la teneur en constituants carbonylés — Méthode au chlorure d'hydroxylammonium,1973-04-01,1,['71.100.60'],ISO/TC 54,9599,,"[5879,5880]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1279:1984 - **Identifier:** ISO 1279:1984 _(verified: appears in the quote below)_ - **Item title:** Essential oils — Determination of carbonyl value — Hydroxylammonium chloride method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1279:1996 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 5879,IS,,ISO 1279:1984,Essential oils — Determination of carbonyl value — Hydroxylammonium chloride method,Huiles essentielles — Détermination de l'indice de carbonyle — Méthode au chlorure d'hydroxylammonium,1984-11-01,2,['71.100.60'],ISO/TC 54,9599,[5878],[5880],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12790-1:2001 - **Identifier:** ISO 12790-1:2001 _(verified: appears in the quote below)_ - **Item title:** Radiation protection — Performance criteria for radiobioassay — Part 1: General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 28218:2010 - **Withdrawn / published date:** 2001-12-20 _(verified: appears in the quote below)_ > 32473,IS,,ISO 12790-1:2001,Radiation protection — Performance criteria for radiobioassay — Part 1: General principles,Radioprotection — Critères de performance pour l'analyse radiotoxicologique — Partie 1: Principes généraux,2001-12-20,1,['13.280'],ISO/TC 85/SC 2,9599,,[40869],"['en','fr']",31, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-1:2003 - **Identifier:** ISO 128-1:2003 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 1: Introduction and index _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-1:2020 - **Withdrawn / published date:** 2003-01-30 _(verified: appears in the quote below)_ > 32462,IS,,ISO 128-1:2003,Technical drawings — General principles of presentation — Part 1: Introduction and index,Dessins techniques — Principes généraux de représentation — Partie 1: Introduction et index,2003-01-30,1,['01.100.01'],ISO/TC 10/SC 1,9599,[3938],[65296],"['en','fr']",10,"
ISO 128-1:2003 gives general rules for the execution of technical drawings, as well as presenting the structure of, and an index for, the other parts of ISO 128. In all, ISO 128 specifies the graphical representation of objects on technical drawings with the aim of facilitating the international exchange of information on drawings and ensuring their uniformity in a comprehensive system relating to several te Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128:1982 - **Identifier:** ISO 128:1982 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-21:1997 | ISO 128-25:1999 | ISO 128-30:2001 | ISO 128-50:2001 | ISO/CD 128-71 | ISO 128-34:2001 | ISO 128-22:1999 | ISO 128-1:2003 | ISO 128-44:2001 | ISO 128-23:1999 | ISO 128-24:1999 | ISO 128-40:2001 | ISO 128-20:1996 - **Withdrawn / published date:** 1982-07-01 _(verified: appears in the quote below)_ > 3938,IS,,ISO 128:1982,Technical drawings — General principles of presentation,Dessins techniques — Principes généraux de représentation,1982-07-01,1,['01.100.01'],ISO/TC 10/SC 1,9599,[3937],"[27382,29096,3939,24240,32832,33942,29094,32462,33943,22292,29095,30692,1408]","['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-2:2020 - **Identifier:** ISO 128-2:2020 _(verified: appears in the quote below)_ - **Item title:** Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-2:2022 - **Withdrawn / published date:** 2020-07-08 _(verified: appears in the quote below)_ > 69129,IS,,ISO 128-2:2020,Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines,Documentation technique de produits (TPD) — Principes généraux de représentation — Partie 2: Conventions de base pour les traits,2020-07-08,1,['01.100.01'],ISO/TC 10,9599,"[27382,29096,29094,22292,1408,57099]",[83355],"['en','fr']",69,"
This document establishes the types of lines used in technical drawings (e.g. diagrams, plans or maps), their designations and their configurations, as well as general rules for the draughting of lines. In addition, this document specifies general rules for the representation of leader and reference lines and their comp Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-20:1996 - **Identifier:** ISO 128-20:1996 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 20: Basic conventions for lines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-2:2020 - **Withdrawn / published date:** 1996-11-14 _(verified: appears in the quote below)_ > 1408,IS,,ISO 128-20:1996,Technical drawings — General principles of presentation — Part 20: Basic conventions for lines,Dessins techniques — Principes généraux de représentation — Partie 20: Conventions de base pour les traits,1996-11-14,1,['01.100.01'],ISO/TC 10/SC 1,9599,[3938],[69129],"['en','fr']",10,"
Contains generally applicable rules for draughting of lines used in technical drawings for the documentation of technical products. Establishes the types of lines, their designations and their configurations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-21:1997 - **Identifier:** ISO 128-21:1997 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 21: Preparation of lines by CAD systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-2:2020 - **Withdrawn / published date:** 1997-02-27 _(verified: appears in the quote below)_ > 27382,IS,,ISO 128-21:1997,Technical drawings — General principles of presentation — Part 21: Preparation of lines by CAD systems,Dessins techniques — Principes généraux de représentation — Partie 21: Préparation des traits par systèmes de CAO,1997-02-27,1,"['35.240.10','01.100.01']",ISO/TC 10/SC 1,9599,[3938],[69129],"['en','fr']",12,Specifies procedures for the calculation of the most important basic types of non-continuous lines according to ISO 128-20 and their line elements.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-22:1999 - **Identifier:** ISO 128-22:1999 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 22: Basic conventions and applications for leader lines and reference lines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-2:2020 - **Withdrawn / published date:** 1999-05-13 _(verified: appears in the quote below)_ > 29094,IS,,ISO 128-22:1999,Technical drawings — General principles of presentation — Part 22: Basic conventions and applications for leader lines and reference lines,Dessins techniques — Principes généraux de représentation — Partie 22: Conventions de base et applications pour les traits de rappel de cote et traits de référence,1999-05-13,1,['01.100.01'],ISO/TC 10/SC 1,9599,[3938],[69129],"['en','fr']",8,This part of ISO 128 specifies general rules on the presentation of leader and reference lines and their components as
well as on the arrangement of instructions on or at leader lines in all kinds of technical documents.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-23:1999 - **Identifier:** ISO 128-23:1999 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 23: Lines on construction drawings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-2:2020 - **Withdrawn / published date:** 1999-07-01 _(verified: appears in the quote below)_ > 22292,IS,,ISO 128-23:1999,Technical drawings — General principles of presentation — Part 23: Lines on construction drawings,Dessins techniques — Principes généraux de représentation — Partie 23: Traits utilisés dans la documentation de construction et de génie civil,1999-07-01,1,['01.100.30'],ISO/TC 10/SC 8,9599,[3938],[69129],"['en','fr']",12,"This part of ISO 128 specifies types of lines and their application in construction documentation comprising
architectural drawings, structural engineering drawings, building service engineering drawings, civil engineering
drawings, landscape drawings and town planning drawings.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-24:1999 - **Identifier:** ISO 128-24:1999 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-24:2014 - **Withdrawn / published date:** 1999-06-03 _(verified: appears in the quote below)_ > 29095,IS,,ISO 128-24:1999,Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings,Dessins techniques — Principes généraux de représentation — Partie 24: Traits utilisés pour les dessins industriels,1999-06-03,1,['01.100.20'],ISO/TC 10/SC 6,9599,[3938],[57099],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-24:2014 - **Identifier:** ISO 128-24:2014 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-2:2020 - **Withdrawn / published date:** 2014-02-11 _(verified: appears in the quote below)_ > 57099,IS,,ISO 128-24:2014,Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings,Dessins techniques — Principes généraux de représentation — Partie 24: Traits utilisés pour les dessins industriels,2014-02-11,2,['01.100.20'],ISO/TC 10/SC 6,9599,[29095],[69129],"['en','fr']",15,ISO 128-24:2014 specifies general rules and basic conventions for the types of lines on mechanical engineering drawings.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-25:1999 - **Identifier:** ISO 128-25:1999 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 25: Lines on shipbuilding drawings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-2:2020 - **Withdrawn / published date:** 1999-11-11 _(verified: appears in the quote below)_ > 29096,IS,,ISO 128-25:1999,Technical drawings — General principles of presentation — Part 25: Lines on shipbuilding drawings,Dessins techniques — Principes généraux de représentation — Partie 25: Traits utilisés pour les dessins de construction navale,1999-11-11,1,"['01.100.20','47.020.01']",ISO/TC 10/SC 6,9599,[3938],[69129],"['en','fr']",10,This part of ISO 128 specifies application rules and basic conventions for the types of lines on shipbuilding
drawings.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-3:2020 - **Identifier:** ISO 128-3:2020 _(verified: appears in the quote below)_ - **Item title:** Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-3:2022 - **Withdrawn / published date:** 2020-06-18 _(verified: appears in the quote below)_ > 69130,IS,,ISO 128-3:2020,"Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts","Documentation technique de produits (TPD) — Principes généraux de représentation — Partie 3: Vues, sections et coupes",2020-06-18,1,['01.100.01'],ISO/TC 10,9599,"[3939,24240,33942,33943,30692,63795]",[83356],"['en','fr']",48,"This document specifies the general principles for presenting views, sections and cuts applicable to various kinds of technical drawings (e.g. mechanical, electrical, architectural, civil engineering), following the orthographic projection methods specified in ISO 5456-2. Views and sections for shipbuilding technical drawings are Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-30:2001 - **Identifier:** ISO 128-30:2001 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 30: Basic conventions for views _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-3:2020 - **Withdrawn / published date:** 2001-04-19 _(verified: appears in the quote below)_ > 3939,IS,,ISO 128-30:2001,Technical drawings — General principles of presentation — Part 30: Basic conventions for views,Dessins techniques — Principes généraux de représentation — Partie 30: Conventions de base pour les vues,2001-04-19,1,['01.100.01'],ISO/TC 10/SC 1,9599,[3938],[69130],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-33:2018 - **Identifier:** ISO 128-33:2018 _(verified: appears in the quote below)_ - **Item title:** Technical product documentation (TPD) — General principles of presentation — Part 33: Representation of views, sections and cuts in construction drawings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-3:2020 - **Withdrawn / published date:** 2018-03-14 _(verified: appears in the quote below)_ > 63795,IS,,ISO 128-33:2018,"Technical product documentation (TPD) — General principles of presentation — Part 33: Representation of views, sections and cuts in construction drawings","Documentation technique de produits (TPD) — Principes généraux de représentation — Partie 33: Représentation des vues, des sections et des coupes dans les dessins de construction",2018-03-14,1,['01.100.30'],ISO/TC 10/SC 8,9599,[15063],[69130],['en'],8,"
ISO 128-33:2018 lays down general rules for marking, designation, placing and orientation of views, sections and cuts, and the position of text in relation to figures on construction drawings.
For all general rules, reference is made to the relevant parts Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-34:2001 - **Identifier:** ISO 128-34:2001 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 34: Views on mechanical engineering drawings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-3:2020 - **Withdrawn / published date:** 2001-01-18 _(verified: appears in the quote below)_ > 33942,IS,,ISO 128-34:2001,Technical drawings — General principles of presentation — Part 34: Views on mechanical engineering drawings,Dessins techniques — Principes généraux de représentation — Partie 34: Vues applicables aux dessins industriels,2001-01-18,1,['01.100.20'],ISO/TC 10/SC 6,9599,[3938],[69130],"['en','fr']",13,"
This part of ISO 128 specifies rules for the presentation of views additional to those of ISO 128-30 and applicable
to mechanical engineering drawings that follow the orthographic projection methods specified in ISO 5456-2.
Attention has also been given to reproduction requirements, including those of microcopying according to
ISO 6428.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-40:2001 - **Identifier:** ISO 128-40:2001 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 40: Basic conventions for cuts and sections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-3:2020 - **Withdrawn / published date:** 2001-06-21 _(verified: appears in the quote below)_ > 30692,IS,,ISO 128-40:2001,Technical drawings — General principles of presentation — Part 40: Basic conventions for cuts and sections,Dessins techniques — Principes généraux de représentation — Partie 40: Conventions de base pour les coupes et les sections,2001-06-21,1,['01.100.01'],ISO/TC 10/SC 1,9599,[3938],[69130],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-43:2015 - **Identifier:** ISO 128-43:2015 _(verified: appears in the quote below)_ - **Item title:** Technical product documentation (TPD) — General principles of presentation — Part 43: Projection methods in building drawings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-3:2022 - **Withdrawn / published date:** 2015-06-15 _(verified: appears in the quote below)_ > 63794,IS,,ISO 128-43:2015,Technical product documentation (TPD) — General principles of presentation — Part 43: Projection methods in building drawings,Documentation technique de produits (TPD) — Principes généraux de représentation — Partie 43: Méthodes de projection dans les dessins de bâtiment,2015-06-15,1,['01.100.30'],ISO/TC 10/SC 8,9599,[7574],[83356],['en'],2,"ISO 128-43:2015 defines two projection methods used in building drawings, namely
? direct orthographic projection method and
? mirrored orthographic projection method,
and also provides the symbols applicable for each method.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-44:2001 - **Identifier:** ISO 128-44:2001 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 44: Sections on mechanical engineering drawings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-3:2020 - **Withdrawn / published date:** 2001-04-19 _(verified: appears in the quote below)_ > 33943,IS,,ISO 128-44:2001,Technical drawings — General principles of presentation — Part 44: Sections on mechanical engineering drawings,Dessins techniques — Principes généraux de représentation — Partie 44: Coupes et sections applicables aux dessins industriels,2001-04-19,1,['01.100.20'],ISO/TC 10/SC 6,9599,[3938],[69130],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 128-50:2001 - **Identifier:** ISO 128-50:2001 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — General principles of presentation — Part 50: Basic conventions for representing areas on cuts and sections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 128-3:2020 - **Withdrawn / published date:** 2001-04-19 _(verified: appears in the quote below)_ > 24240,IS,,ISO 128-50:2001,Technical drawings — General principles of presentation — Part 50: Basic conventions for representing areas on cuts and sections,Dessins techniques — Principes généraux de représentation — Partie 50: Conventions de base pour la représentation des surfaces sur des coupes et des sections,2001-04-19,1,['01.100.01'],ISO/TC 10/SC 1,9599,[3938],[69130],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12800:2003 - **Identifier:** ISO 12800:2003 _(verified: appears in the quote below)_ - **Item title:** Nuclear fuel technology — Guide to the measurement of the specific surface area of uranium oxide powders by the BET method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12800:2017 - **Withdrawn / published date:** 2003-11-27 _(verified: appears in the quote below)_ > 32142,IS,,ISO 12800:2003,Nuclear fuel technology — Guide to the measurement of the specific surface area of uranium oxide powders by the BET method,Technologie du combustible nucléaire — Principe de la mesure de l'aire massique (surface spécifique) des poudres d'oxyde d'uranium par la méthode BET,2003-11-27,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[66464],"['en','fr']",7,"IS0 12800:2003 covers the determination of the specific surface area of as-fabricated uranium dioxide powder by volumetric or gravimetric determination of the amount of nitrogen adsorbed on the powder, and can be applied to other similar materials, e.g. U308, UO2-PuO2 powders, and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12807:1996 - **Identifier:** ISO 12807:1996 _(verified: appears in the quote below)_ - **Item title:** Safe transport of radioactive materials — Leakage testing on packages _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12807:2018 | ISO/WD 12807 - **Withdrawn / published date:** 1996-10-10 _(verified: appears in the quote below)_ > 2496,IS,,ISO 12807:1996,Safe transport of radioactive materials — Leakage testing on packages,Sûreté des transports de matières radioactives — Contrôle de l'étanchéité des colis,1996-10-10,1,"['27.120.30','13.280']",ISO/TC 85/SC 5,9599,,"[50162,41200]","['en','fr']",76, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12809:2011 - **Identifier:** ISO 12809:2011 _(verified: appears in the quote below)_ - **Item title:** Crop protection equipment — Reciprocating positive displacement pumps and centrifugal pumps — Test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12809:2020 - **Withdrawn / published date:** 2011-08-02 _(verified: appears in the quote below)_ > 51778,IS,,ISO 12809:2011,Crop protection equipment — Reciprocating positive displacement pumps and centrifugal pumps — Test methods,Matériel de protection des cultures — Pompes volumétriques alternatives et pompes centrifuges — Méthodes d'essai,2011-08-02,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[72646],"['en','fr']",11,
ISO 12809:2011 specifies test methods and the environmental conditions for evaluating the performance of positive displacement pumps and centrifugal pumps designed for crop protection equipment. It is not applicable to pesticide metering pumps for injection systems.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12813:2015 - **Identifier:** ISO 12813:2015 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Compliance check communication for autonomous systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12813:2019 - **Withdrawn / published date:** 2015-11-19 _(verified: appears in the quote below)_ > 64165,IS,,ISO 12813:2015,Electronic fee collection — Compliance check communication for autonomous systems,Perception du télépéage — Communication de contrôle de conformité pour systèmes autonomes,2015-11-19,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,[51803],[75833],"['en','fr']",42,"ISO 12813:2015 defines requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee-collecting systems. Compliance checking communication (CCC) takes place between a road vehicle's on-board equipment (OBE) and an outside interrogator (road-side mounted equipment, mobile device or hand-held unit), and serves to establish whether the data that are delivered Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12813:2015/Amd 1:2017 - **Identifier:** ISO 12813:2015/Amd 1:2017 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Compliance check communication for autonomous systems — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12813:2019 - **Withdrawn / published date:** 2017-06-01 _(verified: appears in the quote below)_ > 70033,IS,Amd,ISO 12813:2015/Amd 1:2017,Electronic fee collection — Compliance check communication for autonomous systems — Amendment 1,Perception du télépéage — Communication de contrôle de conformité pour systèmes autonomes — Amendement 1,2017-06-01,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[75833],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12813:2019 - **Identifier:** ISO 12813:2019 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Compliance check communication for autonomous systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12813:2024 - **Withdrawn / published date:** 2019-11-15 _(verified: appears in the quote below)_ > 75833,IS,,ISO 12813:2019,Electronic fee collection — Compliance check communication for autonomous systems,Perception de télépéage — Communication de contrôle de conformité pour systèmes autonomes,2019-11-15,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,"[70033,64165]",[82932],"['en','fr']",50,"
This document defines requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee collecting systems. Compliance checking communication (CCC) takes place between a road vehicle's on-board equipment (OBE) and an interrogator (roadside mounted equipment, mobile device or hand-held unit), and serves to establish whether the data that are delivered by Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12815:2013 - **Identifier:** ISO 12815:2013 _(verified: appears in the quote below)_ - **Item title:** Fibre-reinforced plastic composites — Determination of plain-pin bearing strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12815:2025 - **Withdrawn / published date:** 2013-02-25 _(verified: appears in the quote below)_ > 51805,IS,,ISO 12815:2013,Fibre-reinforced plastic composites — Determination of plain-pin bearing strength,Composites plastiques renforcés de fibres — Détermination de la résistance au matage au moyen d'une goupille ordinaire,2013-02-25,1,['83.120'],ISO/TC 61/SC 13,9599,,[88804],['en'],13,
This International Standard specifies a procedure for determining the plain-pin bearing strength of
fibre-reinforced plastic composites.
The method described in this International Standard is applicable to fibre-reinforced plastic composites
with either thermoset or thermoplastic matrices.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12817:2013 - **Identifier:** ISO 12817:2013 _(verified: appears in the quote below)_ - **Item title:** Fibre-reinforced plastic composites — Determination of open-hole compression strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12817:2025 - **Withdrawn / published date:** 2013-03-05 _(verified: appears in the quote below)_ > 51807,IS,,ISO 12817:2013,Fibre-reinforced plastic composites — Determination of open-hole compression strength,Composites plastiques renforcés de fibres — Détermination de la résistance à la compression avec trou nu,2013-03-05,1,['83.120'],ISO/TC 61/SC 13,9599,,[88805],['en'],17,"ISO 12817:2013 specifies the test method to determine the open-hole compressive strength of laminated fibre-reinforced plastic composites. The laminate is intended to be a balanced and symmetrical lay-up or be otherwise homogeneous through the thickness. ISO 12817:2013 applies to all textile diameter fibre types (carbon, glass, aramids, etc.) and matrices (e.g. thermoset, thermoplastic) that meet its requirements Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12819:1999 - **Identifier:** ISO 12819:1999 _(verified: appears in the quote below)_ - **Item title:** Methods of evaluation of the battery life of a battery-powered watch _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12819:2009 - **Withdrawn / published date:** 1999-04-29 _(verified: appears in the quote below)_ > 1917,IS,,ISO 12819:1999,Methods of evaluation of the battery life of a battery-powered watch,Méthodes d'évaluation de l'autonomie de fonctionnement d'une montre à pile,1999-04-29,1,['39.040.10'],ISO/TC 114,9599,,[50874],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12819:1999/Cor 1:1999 - **Identifier:** ISO 12819:1999/Cor 1:1999 _(verified: appears in the quote below)_ - **Item title:** Methods of evaluation of the battery life of a battery-powered watch — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12819:2009 - **Withdrawn / published date:** 1999-11-11 _(verified: appears in the quote below)_ > 33143,IS,Cor,ISO 12819:1999/Cor 1:1999,Methods of evaluation of the battery life of a battery-powered watch — Technical Corrigendum 1,Méthodes d'évaluation de l'autonomie de fonctionnement d'une montre à pile — Rectificatif technique 1,1999-11-11,1,['39.040.10'],ISO/TC 114,9599,,[50874],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12821:2013 - **Identifier:** ISO 12821:2013 _(verified: appears in the quote below)_ - **Item title:** Glass packaging — 26 H 180 crown finish — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12821:2019 - **Withdrawn / published date:** 2013-08-30 _(verified: appears in the quote below)_ > 62017,IS,,ISO 12821:2013,Glass packaging — 26 H 180 crown finish — Dimensions,Emballage en verre — Bague couronne 26 H 180 — Dimensions,2013-08-30,1,['55.100'],ISO/TC 63,9599,,[74278],"['en','fr']",6,
ISO 12821:2013 specifies the dimensions of the 26-mm-tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown closure.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12822:2015 - **Identifier:** ISO 12822:2015 _(verified: appears in the quote below)_ - **Item title:** Glass packaging — 26 H 126 crown finish — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12822:2020 - **Withdrawn / published date:** 2015-07-24 _(verified: appears in the quote below)_ > 62018,IS,,ISO 12822:2015,Glass packaging — 26 H 126 crown finish — Dimensions,Emballages en verre — Bague couronne 26 H 126 — Dimensions,2015-07-24,1,['55.100'],ISO/TC 63,9599,,[74279],"['en','ru']",5,ISO 12822:2015 specifies the dimensions of the 26 mm shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown closure (see CE.T.I.E. data sheet EC1-02 revision 1).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12829:2016 - **Identifier:** ISO 12829:2016 _(verified: appears in the quote below)_ - **Item title:** Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12829:2023 - **Withdrawn / published date:** 2016-08-03 _(verified: appears in the quote below)_ > 61624,IS,,ISO 12829:2016,Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope,Filtres hydrauliques à visser ayant une durée de vie spécifiée — Méthode de vérification de la durée de vie nominale en fatigue et de la pression statique d'éclatement nominale de l'enveloppe sous pression,2016-08-03,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[84960],"['en','fr']",11,"ISO 12829:2016 specifies methods for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope (i.e. the filter housing) of a spin-on hydraulic filter with a disposable filter elemen Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12830:2011 - **Identifier:** ISO 12830:2011 _(verified: appears in the quote below)_ - **Item title:** Paper, board and pulps — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12830:2019 - **Withdrawn / published date:** 2011-11-15 _(verified: appears in the quote below)_ > 51848,IS,,ISO 12830:2011,"Paper, board and pulps — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium","Papiers, cartons et pâtes — Détermination de la teneur en magnésium, calcium, manganèse, fer, cuivre, sodium et potassium soluble dans l'acide",2011-11-15,1,"['85.060','85.040']",ISO/TC 6,9599,"[17515,41587,34643,41588,41589]",[73535],"['en','fr']",12,"
ISO 12830:2011 specifies the procedure for the determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium by atomic absorption spectrometry or by plasma emission spectrometry. The acid-soluble element comprises the acid-soluble part of the incineration resid Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12836:2012 - **Identifier:** ISO 12836:2012 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Digitizing devices for CAD/CAM systems for indirect dental restorations — Test methods for assessing accuracy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12836:2015 - **Withdrawn / published date:** 2012-09-25 _(verified: appears in the quote below)_ > 51927,IS,,ISO 12836:2012,Dentistry — Digitizing devices for CAD/CAM systems for indirect dental restorations — Test methods for assessing accuracy,Médecine bucco-dentaire — Dispositifs de numérisation des systèmes de CFAO pour restaurations dentaires — Méthodes d'essai pour l'évaluation de l'exactitude,2012-09-25,1,['11.060.01'],ISO/TC 106/SC 9,9599,,[68414],"['en','fr']",17,
ISO 12836:2012 specifies test methods for the assessment of the accuracy of digitizing devices for computer-aided design/computer-aided manufacturing (CAD/CAM) systems for indirect dental restorations.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12853:1997 - **Identifier:** ISO 12853:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Microscopes — Information provided to the user _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12853:2015 - **Withdrawn / published date:** 1997-12-25 _(verified: appears in the quote below)_ > 1714,IS,,ISO 12853:1997,Optics and optical instruments — Microscopes — Information provided to the user,Optique et instruments d'optique — Microscopes — Informations délivrées à l'utilisateur,1997-12-25,1,['37.020'],ISO/TC 172/SC 5,9599,,[64984],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12855:2012 - **Identifier:** ISO 12855:2012 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Information exchange between service provision and toll charging _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12855:2015 - **Withdrawn / published date:** 2012-02-13 _(verified: appears in the quote below)_ > 52018,IS,,ISO 12855:2012,Electronic fee collection — Information exchange between service provision and toll charging,Perception du télépéage — Échange d'informations entre la prestation de service et la perception du péage,2012-02-13,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64127],"['en','fr']",75,"ISO 12855:2011 specifies
ISO 12855:2015 specifies
- the interfaces between electronic fee collection (EFC) systems for vehicle related transport services, e.g. road user charging, parking and access control; it does not cover interfaces for EFC systems for public transport; an EFC system can include any EFC system, e.g. including systems that automatically read licence plate numbers o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12855:2022 - **Identifier:** ISO 12855:2022 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Information exchange between service provision and toll charging _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12855:2025 - **Withdrawn / published date:** 2022-04-08 _(verified: appears in the quote below)_ > 78013,IS,,ISO 12855:2022,Electronic fee collection — Information exchange between service provision and toll charging,Perception de télépéage — Échange d'informations entre la prestation de service et la perception du péage,2022-04-08,3,"['35.240.60','03.220.20']",ISO/TC 204,9599,[64127],[88211],"['en','fr']",153,"
This document specifies:
— the interfaces between electronic fee collection (EFC) back-office systems for vehicle-related transport services, e.g. road user charging, parking and access control;
— an exchange of information between the back end system of the two roles of service provision and toll charging, e.g.:
— charging-related data (toll declarati Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12856-1:2014 - **Identifier:** ISO 12856-1:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics — Plastic railway sleepers for railway applications (railroad ties) — Part 1: Material characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12856-1:2022 - **Withdrawn / published date:** 2014-03-11 _(verified: appears in the quote below)_ > 52034,IS,,ISO 12856-1:2014,Plastics — Plastic railway sleepers for railway applications (railroad ties) — Part 1: Material characteristics,Plastiques — Traverses en plastique pour les applications ferroviaires (traverses de voie ferrée) — Partie 1: Propriétés des matériaux,2014-03-11,1,"['83.140.99','45.080']",ISO/TC 269/SC 1,9599,,[78852],['en'],29,
ISO 12856-1:2014 specifies the characteristics of plastic and reinforced plastic materials to be used in the manufacturing of railway sleepers. It is applicable to the sleepers and parts of sleepers to be installed in tracks with or without ballast. Examples of different types of plastic and reinforced sleepers are given in an annex.
52035 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12857-1:1997 - **Identifier:** ISO 12857-1:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 1: Levels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-2:2001 - **Withdrawn / published date:** 1997-08-21 _(verified: appears in the quote below)_ > 23672,IS,,ISO 12857-1:1997,Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 1: Levels,Optique et instruments d'optique — Instruments géodésiques — Méthodes de détermination sur site de la précision — Partie 1: Niveaux,1997-08-21,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[30199],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12857-2:1997 - **Identifier:** ISO 12857-2:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 2: Theodolites _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-3:2001 - **Withdrawn / published date:** 1997-08-21 _(verified: appears in the quote below)_ > 23673,IS,,ISO 12857-2:1997,Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 2: Theodolites,Optique et instruments d'optique — Instruments géodésiques — Méthodes de détermination sur site de la précision — Partie 2: Théodolites,1997-08-21,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[30200],"['en','fr']",25, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12857-3:1997 - **Identifier:** ISO 12857-3:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 3: Electro-optical distance meters (EDM instruments) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17123-4:2001 - **Withdrawn / published date:** 1997-08-21 _(verified: appears in the quote below)_ > 23674,IS,,ISO 12857-3:1997,Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 3: Electro-optical distance meters (EDM instruments),Optique et instruments d'optique — Instruments géodésiques — Méthodes de détermination sur site de la précision — Partie 3: Télémètres électro-optiques (instruments MED),1997-08-21,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[30198],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12858-1:1999 - **Identifier:** ISO 12858-1:1999 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Ancillary devices for geodetic instruments — Part 1: Invar levelling staffs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12858-1:2014 - **Withdrawn / published date:** 1999-04-29 _(verified: appears in the quote below)_ > 2038,IS,,ISO 12858-1:1999,Optics and optical instruments — Ancillary devices for geodetic instruments — Part 1: Invar levelling staffs,Optique et instruments d'optique — Equipements annexes pour les instruments géodésiques — Partie 1: Mires de nivellement en invar,1999-04-29,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[57606],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12858-2:1999 - **Identifier:** ISO 12858-2:1999 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Ancillary devices for geodetic instruments — Part 2: Tripods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12858-2:2020 - **Withdrawn / published date:** 1999-10-21 _(verified: appears in the quote below)_ > 28718,IS,,ISO 12858-2:1999,Optics and optical instruments — Ancillary devices for geodetic instruments — Part 2: Tripods,Optique et instruments d'optique — Équipements annexes pour les instruments géodésiques — Partie 2: Trépieds,1999-10-21,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[78132],"['en','fr']",8,"This part of ISO 12858 specifies the most important requirements of telescopic tripods for surveying instruments
and the connection between instrument and tripod.
The requirements in this part of ISO 12858 enable instruments and tripods of different manufacturers to be joined to
one another, without prejudicing their performance and their usefulness.
This part of ISO Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12858-2:1999/Amd 1:2013 - **Identifier:** ISO 12858-2:1999/Amd 1:2013 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Ancillary devices for geodetic instruments — Part 2: Tripods — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12858-2:2020 - **Withdrawn / published date:** 2013-09-27 _(verified: appears in the quote below)_ > 57608,IS,Amd,ISO 12858-2:1999/Amd 1:2013,Optics and optical instruments — Ancillary devices for geodetic instruments — Part 2: Tripods — Amendment 1,Optique et instruments d'optique — Équipements annexes pour les instruments géodésiques — Partie 2: Trépieds — Amendement 1,2013-09-27,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[78132],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12863:2010 - **Identifier:** ISO 12863:2010 _(verified: appears in the quote below)_ - **Item title:** Standard test method for assessing the ignition propensity of cigarettes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 12863 | ISO/NP 12863 | ISO/PWI 12863 | ISO 12863:2022 - **Withdrawn / published date:** 2010-09-13 _(verified: appears in the quote below)_ > 52074,IS,,ISO 12863:2010,Standard test method for assessing the ignition propensity of cigarettes,Méthode d'essai normalisée pour évaluer le potentiel incendiaire des cigarettes,2010-09-13,1,"['13.220.40','65.160']",ISO/TC 92/SC 1,9599,,"[58013,74841,67885,82381]","['en','fr']",19,"
ISO 12863:2010 provides a standard assessment of the capability of a cigarette, positioned on one of three standard substrates, to extinguish or to generate sufficient heat to continue burning, and thus potentially cause ignition of bedding or upholstered furniture. ISO 12863:2010 is applicable to factory-made cigarettes that burn along the length of a tobacco column. This is a performance-based standard; it do Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12863:2010/Amd 1:2016 - **Identifier:** ISO 12863:2010/Amd 1:2016 _(verified: appears in the quote below)_ - **Item title:** Standard test method for assessing the ignition propensity of cigarettes — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 12863 | ISO 12863:2022 - **Withdrawn / published date:** 2016-06-27 _(verified: appears in the quote below)_ > 69778,IS,Amd,ISO 12863:2010/Amd 1:2016,Standard test method for assessing the ignition propensity of cigarettes — Amendment 1,Méthode d'essai normalisée pour évaluer le potentiel incendiaire des cigarettes — Amendement 1,2016-06-27,1,"['13.220.40','65.160']",ISO/TC 92/SC 1,9599,,"[74841,82381]","['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12863:2010/Cor 1:2011 - **Identifier:** ISO 12863:2010/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 12863 | ISO/PWI 12863 | ISO 12863:2022 - **Withdrawn / published date:** 2011-01-21 _(verified: appears in the quote below)_ > 58040,IS,Cor,ISO 12863:2010/Cor 1:2011,Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1,Méthode d'essai normalisée pour évaluer le potentiel incendiaire des cigarettes — Rectificatif technique 1,2011-01-21,1,"['13.220.40','65.160']",ISO/TC 92/SC 1,9599,,"[74841,67885,82381]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12865:1998 - **Identifier:** ISO 12865:1998 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic instruments — Retinoscopes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12865:2006 - **Withdrawn / published date:** 1998-06-11 _(verified: appears in the quote below)_ > 2575,IS,,ISO 12865:1998,Ophthalmic instruments — Retinoscopes,Instruments ophtalmiques — Rétinoscopes,1998-06-11,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[39144],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12867:1998 - **Identifier:** ISO 12867:1998 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic instruments — Trial frames _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12867:2010 - **Withdrawn / published date:** 1998-06-18 _(verified: appears in the quote below)_ > 2591,IS,,ISO 12867:1998,Ophthalmic instruments — Trial frames,Instruments ophtalmiques — Montures d'essai,1998-06-18,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[54969],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12870:1997 - **Identifier:** ISO 12870:1997 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Spectacle frames — General requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12870:2004 - **Withdrawn / published date:** 1997-12-18 _(verified: appears in the quote below)_ > 2368,IS,,ISO 12870:1997,Ophthalmic optics — Spectacle frames — General requirements and test methods,Optique ophtalmique — Montures de lunettes — Exigences générales et méthodes d'essai,1997-12-18,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[29884],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12870:2004 - **Identifier:** ISO 12870:2004 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Spectacle frames — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12870:2012 - **Withdrawn / published date:** 2004-07-30 _(verified: appears in the quote below)_ > 29884,IS,,ISO 12870:2004,Ophthalmic optics — Spectacle frames — Requirements and test methods,Optique ophtalmique — Montures de lunettes — Exigences et méthodes d'essai,2004-07-30,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[2368,17183]",[51050],"['en','fr']",26,"
ISO 12870:2004 specifies fundamental requirements for unglazed spectacle frames designed for use with all prescription lenses, and is applicable to frames at the point of sale to the retailer, by the manufacturer or supplier.
It is applicable to all spectacle frame types including rimless mounts, semi-rimless mounts and folding spectacle frames. ISO 12870:2004 is applicable to spectacle frames made from natural organic materials. Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12870:2012 - **Identifier:** ISO 12870:2012 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Spectacle frames — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12870:2016 - **Withdrawn / published date:** 2012-03-26 _(verified: appears in the quote below)_ > 51050,IS,,ISO 12870:2012,Ophthalmic optics — Spectacle frames — Requirements and test methods,Optique ophtalmique — Montures de lunettes — Exigences et méthodes d'essai,2012-03-26,3,['11.040.70'],ISO/TC 172/SC 7,9599,[29884],[68526],"['en','fr']",28, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12870:2016 - **Identifier:** ISO 12870:2016 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Spectacle frames — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 12870 | ISO 12870:2024 - **Withdrawn / published date:** 2016-10-28 _(verified: appears in the quote below)_ > 68526,IS,,ISO 12870:2016,Ophthalmic optics — Spectacle frames — Requirements and test methods,Optique ophtalmique — Montures de lunettes — Exigences et méthodes d'essai,2016-10-28,4,['11.040.70'],ISO/TC 172/SC 7,9599,[51050],"[73566,75916]","['en','fr']",26,"
ISO 12870:2016 specifies fundamental requirements for unglazed spectacle frames designed for use with all prescription lenses. It is applicable to frames at the point of sale by the manufacturer or supplier to the retailer.
This International Standard is applicable to all spectacle frame types, including rimless mounts, semi-rimless mounts and folding spectacle frames. It is also applicable to spectacle frames made from natural Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12871:2010 - **Identifier:** ISO 12871:2010 _(verified: appears in the quote below)_ - **Item title:** Olive oils and olive-pomace oils — Determination of aliphatic alcohols content by capillary gas chromatography _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12871:2019 - **Withdrawn / published date:** 2010-04-28 _(verified: appears in the quote below)_ > 52081,IS,,ISO 12871:2010,Olive oils and olive-pomace oils — Determination of aliphatic alcohols content by capillary gas chromatography,Huiles d'olive et huiles de grignons d'olive — Détermination de la teneur en alcools aliphatiques par chromatographie en phase gazeuse sur colonne capillaire,2010-04-28,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[73393],"['en','fr','ru']",11,"
ISO 12871:2010 specifies a procedure for the determination of the content, as a mass fraction expressed in milligrams per kilogram, of aliphatic alcohols in olive and olive-pomace oils.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12872:2010 - **Identifier:** ISO 12872:2010 _(verified: appears in the quote below)_ - **Item title:** Olive oils and olive-pomace oils — Determination of the 2-glyceryl monopalmitate content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12872:2022 - **Withdrawn / published date:** 2010-04-28 _(verified: appears in the quote below)_ > 52082,IS,,ISO 12872:2010,Olive oils and olive-pomace oils — Determination of the 2-glyceryl monopalmitate content,Huiles d'olive et huiles de grignons d'olive — Détermination de la teneur en 2-glycéryl monopalmitate,2010-04-28,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[83738],"['en','fr','ru']",13,"ISO 12872:2010 specifies a procedure for the determination of the content, as a percentage mass fraction, of 2-glyceryl monopalmitate content in olive oils and olive-pomace oils that are liquid at ambient temperature (20 °C).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12891-1:1998 - **Identifier:** ISO 12891-1:1998 _(verified: appears in the quote below)_ - **Item title:** Retrieval and analysis of surgical implants — Part 1: Retrieval and handling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12891-1:2011 - **Withdrawn / published date:** 1998-11-19 _(verified: appears in the quote below)_ > 24558,IS,,ISO 12891-1:1998,Retrieval and analysis of surgical implants — Part 1: Retrieval and handling,Retrait et analyse des implants chirurgicaux — Partie 1: Retrait et manipulation,1998-11-19,1,['11.040.40'],ISO/TC 150,9599,,[46113],"['en','fr']",22, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12891-1:2011 - **Identifier:** ISO 12891-1:2011 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Retrieval and analysis of surgical implants — Part 1: Retrieval and handling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12891-1:2015 - **Withdrawn / published date:** 2011-04-28 _(verified: appears in the quote below)_ > 46113,IS,,ISO 12891-1:2011,Implants for surgery — Retrieval and analysis of surgical implants — Part 1: Retrieval and handling,Implants chirurgicaux — Retrait et analyse des implants chirurgicaux — Partie 1: Retrait et manipulation,2011-04-28,2,['11.040.40'],ISO/TC 150,9599,[24558],[68008],"['en','ru']",23,"ISO 12891-1:2011 specifies the method to be followed for the retrieval and handling of surgical implants and associated tissues and fluids. In particular, it specifies the essential steps to be followed for the safe and proper obtaining of the clinical history, pre-explantation checks and examinations, collection, labelling, cleaning, decontamination, documentation, packing and shippin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12891-2:2000 - **Identifier:** ISO 12891-2:2000 _(verified: appears in the quote below)_ - **Item title:** Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved metallic surgical implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12891-2:2014 - **Withdrawn / published date:** 2000-02-17 _(verified: appears in the quote below)_ > 24559,IS,,ISO 12891-2:2000,Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved metallic surgical implants,Retrait et analyse des implants chirurgicaux — Partie 2: Analyse des implants chirurgicaux métalliques retirés,2000-02-17,1,['11.040.40'],ISO/TC 150,9599,,[59181],['en'],9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12891-2:2014 - **Identifier:** ISO 12891-2:2014 _(verified: appears in the quote below)_ - **Item title:** Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12891-2:2020 - **Withdrawn / published date:** 2014-09-08 _(verified: appears in the quote below)_ > 59181,IS,,ISO 12891-2:2014,Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical implants,Retrait et analyse des implants chirurgicaux — Partie 2: Analyse des implants chirurgicaux métalliques retirés,2014-09-08,2,['11.040.40'],ISO/TC 150,9599,"[24559,24999,25000]",[79950],['en'],28,"
ISO 12891-2:2014 specifies methods for the analysis of retrieved surgical implants.
ISO 12891-2:2014 describes the analysis of retrieved metallic, polymeric and ceramic implants. The analysis is divided into three stages which are increasingly destructive.
ISO 12891-2:2014 can also be applied to other materials, e.g. animal tissue implants.
ISO 12891-2:2014 can Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12891-3:2000 - **Identifier:** ISO 12891-3:2000 _(verified: appears in the quote below)_ - **Item title:** Retrieval and analysis of surgical implants — Part 3: Analysis of retrieved polymeric surgical implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 12891-3 | ISO 12891-2:2014 - **Withdrawn / published date:** 2000-02-17 _(verified: appears in the quote below)_ > 25000,IS,,ISO 12891-3:2000,Retrieval and analysis of surgical implants — Part 3: Analysis of retrieved polymeric surgical implants,Retrait et analyse des implants chirurgicaux — Partie 3: Analyse des implants chirurgicaux en polymères retirés,2000-02-17,1,['11.040.40'],ISO/TC 150,9599,,"[59148,59181]",['en'],12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12891-4:2000 - **Identifier:** ISO 12891-4:2000 _(verified: appears in the quote below)_ - **Item title:** Retrieval and analysis of surgical implants — Part 4: Analysis of retrieved ceramic surgical implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 12891-4 | ISO 12891-2:2014 - **Withdrawn / published date:** 2000-01-27 _(verified: appears in the quote below)_ > 24999,IS,,ISO 12891-4:2000,Retrieval and analysis of surgical implants — Part 4: Analysis of retrieved ceramic surgical implants,Retrait et analyse des implants chirurgicaux — Partie 4: Analyse des implants chirurgicaux en céramique retirés,2000-01-27,1,['11.040.40'],ISO/TC 150,9599,,"[59143,59181]",['en'],12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 129-1:2004 - **Identifier:** ISO 129-1:2004 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Indication of dimensions and tolerances — Part 1: General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 129-1.2 | ISO 129-1:2018 - **Withdrawn / published date:** 2004-09-24 _(verified: appears in the quote below)_ > 29015,IS,,ISO 129-1:2004,Technical drawings — Indication of dimensions and tolerances — Part 1: General principles,Dessins techniques — Indication des cotes et tolérances — Partie 1: Principes généraux,2004-09-24,1,['01.100.01'],ISO/TC 10/SC 1,9599,"[4408,3942]","[51241,64007]","['en','fr']",33,
ISO 129-1:2004 establishes the general principles of dimensioning applicable for all types of technical drawings.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 129:1985 - **Identifier:** ISO 129:1985 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Dimensioning — General principles, definitions, methods of execution and special indications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 129-1:2004 - **Withdrawn / published date:** 1985-08-15 _(verified: appears in the quote below)_ > 3942,IS,,ISO 129:1985,"Technical drawings — Dimensioning — General principles, definitions, methods of execution and special indications","Dessins techniques — Cotation — Principes généraux, définitions, méthodes d'exécution et indications spéciales",1985-08-15,1,['01.100.01'],ISO/TC 10/SC 1,9599,[7575],[29015],"['en','fr']",12,"Replaces ISO-Recommendation R 129-1959 of which it constitutes a technical revision. Applicable to all kinds of technical drawings (mechanical, electrical, architectural, civil engineering, etc.). The specified general principles shall be followed to facilitate the international exchange of drawings in technical fields. Specialized practices are not covered adequa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12900:1997 - **Identifier:** ISO 12900:1997 _(verified: appears in the quote below)_ - **Item title:** Hard coal - Determination of abrasiveness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12900:2015 - **Withdrawn / published date:** 1997-12-25 _(verified: appears in the quote below)_ > 1671,IS,,ISO 12900:1997,Hard coal - Determination of abrasiveness,Houille — Détermination de l'abrasivité,1997-12-25,1,['73.040'],ISO/TC 27/SC 5,9599,,[67725],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12900:2015 - **Identifier:** ISO 12900:2015 _(verified: appears in the quote below)_ - **Item title:** Hard coal — Determination of abrasiveness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12900:2018 - **Withdrawn / published date:** 2015-06-03 _(verified: appears in the quote below)_ > 67725,IS,,ISO 12900:2015,Hard coal — Determination of abrasiveness,Houille — Détermination de l'abrasivité,2015-06-03,2,['73.040'],ISO/TC 27/SC 5,9599,[1671],[75882],['en'],9,
ISO 12900:2015 describes a method for determining the abrasiveness of hard coal.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12914:2012 - **Identifier:** ISO 12914:2012 _(verified: appears in the quote below)_ - **Item title:** Soil quality — Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 54321:2020 - **Withdrawn / published date:** 2012-01-30 _(verified: appears in the quote below)_ > 52171,IS,,ISO 12914:2012,Soil quality — Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements,Qualité du sol — Extraction assistée par micro-ondes de la fraction soluble dans l'eau régale pour la détermination des éléments,2012-01-30,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[75441],"['en','fr']",7,ISO 12914:2012 specifies a method for microwave-assisted extraction of elements from samples using aqua regia as the extraction solution for the determination of elements. This method is applicable to all types of soil and soil material.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12917-1:2002 - **Identifier:** ISO 12917-1:2002 _(verified: appears in the quote below)_ - **Item title:** Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12917-1:2017 - **Withdrawn / published date:** 2002-06-27 _(verified: appears in the quote below)_ > 35926,IS,,ISO 12917-1:2002,Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods,Pétrole et produits pétroliers liquides — Jaugeage des réservoirs cylindriques horizontaux — Partie 1: Méthodes manuelles,2002-06-27,1,['75.180.30'],ISO/TC 28/SC 2,9599,,[55309],"['en','fr']",18,"ISO 12917-1 specifies manual methods for the calibration of nominally horizontal cylindrical tanks, installed at a fixed location. It is applicable to horizontal tanks up to 4 m in diameter and 30 m in length.
The methods are applicable to insulated and non-insulated tanks, either when they are above-ground or underground. The methods are applicable to pr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12917-1:2002/Cor 1:2009 - **Identifier:** ISO 12917-1:2002/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12917-1:2017 - **Withdrawn / published date:** 2009-09-25 _(verified: appears in the quote below)_ > 55191,IS,Cor,ISO 12917-1:2002/Cor 1:2009,Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods — Technical Corrigendum 1,Pétrole et produits pétroliers liquides — Jaugeage des réservoirs cylindriques horizontaux — Partie 1: Méthodes manuelles — Rectificatif technique 1,2009-09-25,1,['75.180.30'],ISO/TC 28/SC 2,9599,,[55309],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12922:1999 - **Identifier:** ISO 12922:1999 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12922:2012 - **Withdrawn / published date:** 1999-10-21 _(verified: appears in the quote below)_ > 2719,IS,,ISO 12922:1999,"Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille H (Systèmes hydrauliques) — Spécifications applicables aux catégories HFAE, HFAS, HFB, HFC, HFDR et HFDU",1999-10-21,1,['75.120'],ISO/TC 28/SC 4,9599,,[43284],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12922:1999/Cor 1:2001 - **Identifier:** ISO 12922:1999/Cor 1:2001 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12922:2012 - **Withdrawn / published date:** 2001-02-15 _(verified: appears in the quote below)_ > 35052,IS,Cor,ISO 12922:1999/Cor 1:2001,"Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU — Technical Corrigendum 1","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille H (Systèmes hydrauliques) — Spécifications applicables aux catégories HFAE, HFAS, HFB, HFC, HFDR et HFDU — Rectificatif technique 1",2001-02-15,1,['75.120'],ISO/TC 28/SC 4,9599,,[43284],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12922:2012 - **Identifier:** ISO 12922:2012 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12922:2020 - **Withdrawn / published date:** 2012-11-30 _(verified: appears in the quote below)_ > 43284,IS,,ISO 12922:2012,"Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille H (Systèmes hydrauliques) — Spécifications applicables aux fluides hydrauliques des catégories HFAE, HFAS, HFB, HFC, HFDR et HFDU",2012-11-30,2,['75.120'],ISO/TC 28/SC 4,9599,"[2719,35052]",[76807],"['en','fr']",10,"
ISO 12922:2012 specifies the minimum requirements of unused fire-resistant and less-flammable hydraulic fluids for hydrostatic and hydrodynamic systems in general industrial applications. It is not i Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12924:2010 - **Identifier:** ISO 12924:2010 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12924:2023 | ISO/NP 12924 - **Withdrawn / published date:** 2010-04-19 _(verified: appears in the quote below)_ > 44301,IS,,ISO 12924:2010,"Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille X (Graisses) — Spécifications",2010-04-19,1,['75.100'],ISO/TC 28/SC 4,9599,,"[82683,61112]","['en','fr']",6,"
ISO 12924:2010 specifies the requirements of greases used for the lubrication of equipment, components of machines, vehicles, etc. The purpose of ISO 12924:2010 is to provide guidance suppliers and end users of greases and to equipment manufacturers of grease-lubricated equipment.
ISO 12924:2010 is written in a general form so that its application can accommodate various climatic Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12924:2010/Cor 1:2012 - **Identifier:** ISO 12924:2010/Cor 1:2012 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12924:2023 - **Withdrawn / published date:** 2012-06-15 _(verified: appears in the quote below)_ > 62016,IS,Cor,ISO 12924:2010/Cor 1:2012,"Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification — Technical Corrigendum 1","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille X (Graisses) — Spécifications — Rectificatif technique 1",2012-06-15,1,['75.100'],ISO/TC 28/SC 4,9599,,[82683],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12925-1:1996 - **Identifier:** ISO 12925-1:1996 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12925-1:2018 | ISO/NP 12925-1 - **Withdrawn / published date:** 1996-12-05 _(verified: appears in the quote below)_ > 2744,IS,,ISO 12925-1:1996,"Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear systems","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille C (Engrenages) — Partie 1: Spécifications des lubrifiants pour systèmes d'engrenages sous carter",1996-12-05,1,['75.100'],ISO/TC 28/SC 4,9599,,"[70817,59652]","['en','fr']",8,"
Gives specifications relative to family C for lubricants, industrial oils and related products of Class L (ISO 6743-6). Deals only with lubricants for industrial gears in enclosed systems. Does not contain lubricants for motor vehicle gears.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12925-1:1996/Cor 1:2002 - **Identifier:** ISO 12925-1:1996/Cor 1:2002 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear systems — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12925-1:2018 | ISO/NP 12925-1 - **Withdrawn / published date:** 2002-03-07 _(verified: appears in the quote below)_ > 36490,IS,Cor,ISO 12925-1:1996/Cor 1:2002,"Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear systems — Technical Corrigendum 1","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille C (Engrenages) — Partie 1: Spécifications des lubrifiants pour systèmes d'engrenages sous carter — Rectificatif technique 1",2002-03-07,1,['75.100'],ISO/TC 28/SC 4,9599,,"[70817,59652]",['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 12925-1:2018 - **Identifier:** ISO 12925-1:2018 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12925-1:2024 - **Withdrawn / published date:** 2018-01-17 _(verified: appears in the quote below)_ > 70817,IS,,ISO 12925-1:2018,"Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille C (engrenages) — Partie 1: Spécifications des lubrifiants pour systèmes d'engrenages sous carter",2018-01-17,2,['75.100'],ISO/TC 28/SC 4,9599,"[36490,2744]",[87200],"['en','fr']",44,"ISO 12925-1:2018 establishes the specifications relative to family C (gears) for lubricants, industrial oils and related products of Class L (see ISO 6743‑6). This document deals only with lubricants for enclosed gear systems. Lubricants for open gears and greases Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 31](https://referencesource.org/iso-standard-supersessions/p/31/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 33](https://referencesource.org/iso-standard-supersessions/p/33/) Last verified: 2026-08-05. Review by: 2027-02-02.