Applies to optical instruments and instruments with optical assemblies in extreme conditions of use. Specifies requirements to be met with regard to the resistance of the optical, mechanical, chemical and electrical properties or performance data of the instruments influences and hence stipulates geographical and technical areas of applicatio Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10109-8:2005 - **Identifier:** ISO 10109-8:2005 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Environmental requirements — Part 8: Test requirements for extreme conditions of use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10109:2014 - **Withdrawn / published date:** 2005-11-16 _(verified: appears in the quote below)_ > 40747,IS,,ISO 10109-8:2005,Optics and photonics — Environmental requirements — Part 8: Test requirements for extreme conditions of use,Optique et photonique — Exigences environnementales — Partie 8: Exigences d'essai pour conditions d'utilisation extrêmes,2005-11-16,2,['37.020'],ISO/TC 172/SC 1,9599,[18087],[63139],['en'],12,"
ISO 10109-8:2005 is applicable to optical instruments and instruments with optical assemblies in extreme conditions of use.
It specifies requirements to be met with regard to the resistance of the optical, mechanical, chemical and electrical properties or performance data of instruments to environmental influences and hence determines geographical and technica Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1011:1973 - **Identifier:** ISO 1011:1973 _(verified: appears in the quote below)_ - **Item title:** Photography — Colour paper for roll paper printers — Sizes of rolls _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1009:1992 - **Withdrawn / published date:** 1973-09-01 _(verified: appears in the quote below)_ > 5478,IS,,ISO 1011:1973,Photography — Colour paper for roll paper printers — Sizes of rolls,"Photographie — Papiers en couleurs, sur bobines, pour tireuses — Dimensions des bobines",1973-09-01,1,['37.040.20'],ISO/TC 42,9599,,[5476],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-1:1996 - **Identifier:** ISO 10110-1:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-1:2006 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18088,IS,,ISO 10110-1:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 1: General,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 1: Généralités,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[35991],"['en','fr']",21,"
Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Specifies the presentation in drawings of the characteristics, especially the tolerances, of optical elements and systems.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-1:2006 - **Identifier:** ISO 10110-1:2006 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-1:2019 - **Withdrawn / published date:** 2006-07-07 _(verified: appears in the quote below)_ > 35991,IS,,ISO 10110-1:2006,Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 1: Généralités,2006-07-07,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,[18088],[57574],"['en','fr']",24,"The ISO 10110 series of International Standards specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.
ISO 10110-1:2006 specifies the presentation in drawings of the characteristics, especially the tolerances, of optical elements and systems.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-10:1996 - **Identifier:** ISO 10110-10:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 10: Table representing data of a lens element _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-10:2004 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18095,IS,,ISO 10110-10:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 10: Table representing data of a lens element,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 10: Tableau représentant les données d'une lentille,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[34625],"['en','fr']",6,"Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Specifies a format for indicating the dimensions, permissible deviations and material imperfections of a lens element in ta Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-10:2004 - **Identifier:** ISO 10110-10:2004 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 10: Table representing data of optical elements and cemented assemblies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-1:2019 - **Withdrawn / published date:** 2004-02-09 _(verified: appears in the quote below)_ > 34625,IS,,ISO 10110-10:2004,Optics and photonics — Preparation of drawings for optical elements and systems — Part 10: Table representing data of optical elements and cemented assemblies,Optique et photonique — Préparation des dessins pour éléments et systèmes optiques — Partie 10: Tableau représentant les données d'éléments optiques et d'assemblages collés,2004-02-09,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,[18095],[57574],"['en','fr']",11,"
ISO 10110-10:2004 specifies a format for indicating the dimensions, permissible deviations and material imperfections of optical elements and cemented assemblies in tabular form as part of specification of the presentation of design and functio Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-11:1996 - **Identifier:** ISO 10110-11:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-11:2016 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18096,IS,,ISO 10110-11:1996,Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 11: Données non tolérancées,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[68315],"['en','fr']",2,
Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Specifies the permissible deviations and material imperfections when these are not explicitly indicated.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-11:1996/Cor 1:2006 - **Identifier:** ISO 10110-11:1996/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-11:2016 - **Withdrawn / published date:** 2006-09-11 _(verified: appears in the quote below)_ > 44793,IS,Cor,ISO 10110-11:1996/Cor 1:2006,Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data — Technical Corrigendum 1,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 11: Données non tolérancées — Rectificatif technique 1,2006-09-11,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[68315],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-11:2016 - **Identifier:** ISO 10110-11:2016 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-11:2025 - **Withdrawn / published date:** 2016-07-07 _(verified: appears in the quote below)_ > 68315,IS,,ISO 10110-11:2016,Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 11: Données non tolérancées,2016-07-07,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,"[18096,44793]",[84354],"['en','fr']",3,ISO 10110-11:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.
It specifies the permissible deviations and material imperfections when these are not explicitly indicated.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-12:1997 - **Identifier:** ISO 10110-12:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-12:2007 - **Withdrawn / published date:** 1997-08-14 _(verified: appears in the quote below)_ > 21006,IS,,ISO 10110-12:1997,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 12: Surfaces asphériques,1997-08-14,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[37993],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-12:2007 - **Identifier:** ISO 10110-12:2007 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-12:2019 - **Withdrawn / published date:** 2007-08-23 _(verified: appears in the quote below)_ > 37993,IS,,ISO 10110-12:2007,Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces,Optique et photonique — Préparation des dessins pour éléments et systèmes optiques — Partie 12: Surfaces asphériques,2007-08-23,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,[21006],[69956],"['en','fr']",15,"ISO 10110-12:2007 specifies rules for presentation, dimensioning and tolerancing of optically effective surfaces of aspheric form.
ISO 10110-12:2007 does not apply to discontinuous surfaces such as Fresnel surfaces or gratings.
ISO 10110-12:2007 does not specify the method by which compliance with the specifications is to be tested.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-12:2007/Amd 1:2013 - **Identifier:** ISO 10110-12:2007/Amd 1:2013 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-12:2019 - **Withdrawn / published date:** 2013-09-10 _(verified: appears in the quote below)_ > 59309,IS,Amd,ISO 10110-12:2007/Amd 1:2013,Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces — Amendment 1,Optique et photonique — Préparation des dessins pour éléments et systèmes optiques — Partie 12: Surfaces asphériques — Amendement 1,2013-09-10,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[69956],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-14:2003 - **Identifier:** ISO 10110-14:2003 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-14:2007 - **Withdrawn / published date:** 2003-04-04 _(verified: appears in the quote below)_ > 26178,IS,,ISO 10110-14:2003,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance,Optique et instruments d'optique — Indication sur les dessins pour éléments et systèmes optiques — Partie 14: Tolérance de déformation des fronts d'onde,2003-04-04,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[42363],"['en','fr']",29,"International Standard ISO 10110 applies to the presentation of design and functional requirements for optical elements and assemblies in technical drawings used for manufacturing and inspection.
ISO 10110-14:2003 provides rules for the indication of the allowable deformation of a wavefront Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-14:2007 - **Identifier:** ISO 10110-14:2007 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-14:2018 - **Withdrawn / published date:** 2007-09-13 _(verified: appears in the quote below)_ > 42363,IS,,ISO 10110-14:2007,Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance,Optique et photonique — Préparation des dessins pour éléments et systèmes optiques — Partie 14: Tolérance de déformation du front d'onde,2007-09-13,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,[26178],[69957],"['en','fr']",10,"
ISO 10110-14:2007 gives rules for the indication of the permissible deformation of a wavefront transmitted through or, in the case of reflective optics, reflected from an optical element or assembly.
The deformation of the wavefront refers to its departure from the desired shape. The tilt of the wavefront wit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-2:1996 - **Identifier:** ISO 10110-2:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 2: Material imperfections — Stress birefringence _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 10110-2 | ISO/PWI 10110-2 | ISO 10110-18:2018 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18089,IS,,ISO 10110-2:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 2: Material imperfections — Stress birefringence,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 2: Imperfections des matériaux — Biréfringence sous contrainte,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,"[35992,57571,68155]","['en','fr']",4,
Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Specifies the indication of the permissible stress birefringence in optical elements made of isot Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-3:1996 - **Identifier:** ISO 10110-3:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 3: Material imperfections — Bubbles and inclusions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 10110-3 | ISO 10110-18:2018 | ISO/PWI 10110-3 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18090,IS,,ISO 10110-3:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 3: Material imperfections — Bubbles and inclusions,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 3: Imperfections des matériaux — Bulles et inclusions,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,"[35993,68155,57572]","['en','fr']",4,
Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Specifies the indication of the level of acceptability of bubbles and other inclusions in optical elemen Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-4:1997 - **Identifier:** ISO 10110-4:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 4: Material imperfections — Inhomogeneity and striae _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-18:2018 | ISO/PWI 10110-4 | ISO/WD 10110-4 - **Withdrawn / published date:** 1997-08-07 _(verified: appears in the quote below)_ > 21004,IS,,ISO 10110-4:1997,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 4: Material imperfections — Inhomogeneity and striae,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 4: Imperfections des matériaux — Hétérogénéités et stries,1997-08-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,"[68155,57573,37991]","['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-5:1996 - **Identifier:** ISO 10110-5:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-5:2007 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18091,IS,,ISO 10110-5:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 5: Tolérances de forme de surface,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[42362],"['en','fr']",18,
Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Gives rules for indicating the tolerances for surface form. Applies to surfaces of both spherical and aspheric form.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-5:1996/Cor 1:1996 - **Identifier:** ISO 10110-5:1996/Cor 1:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-5:2007 - **Withdrawn / published date:** 1996-08-01 _(verified: appears in the quote below)_ > 27597,IS,Cor,ISO 10110-5:1996/Cor 1:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances — Technical Corrigendum 1,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 5: Tolérances de forme de surface — Rectificatif technique 1,1996-08-01,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[42362],"['en','fr']",1,"Replaces the word spherical with the word aspheric in clause 3.10, second line.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-5:2007 - **Identifier:** ISO 10110-5:2007 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-5:2015 - **Withdrawn / published date:** 2007-07-30 _(verified: appears in the quote below)_ > 42362,IS,,ISO 10110-5:2007,Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 5: Tolérances de forme de surface,2007-07-30,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,"[27597,18091]",[57566],"['en','fr']",7,ISO 10110-5:2007 forms part of the ISO 10110 series which specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.
ISO 10110-5:2007 specifies rules for indicating the tolerance for surface form and applies to surfaces o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-5:2015 - **Identifier:** ISO 10110-5:2015 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-5:2026 | ISO/WD 10110-5 - **Withdrawn / published date:** 2015-07-23 _(verified: appears in the quote below)_ > 57566,IS,,ISO 10110-5:2015,Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 5: Tolérances de forme de surface,2015-07-23,3,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,[42362],"[86355,82545]","['en','fr']",20,"
ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.
ISO 10110-5:2015 specifies rules for indicating the tolerance for surface form deviation.
NOTE The terminology of interferometry Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-6:1996 - **Identifier:** ISO 10110-6:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 10110-6 | ISO 10110-6:2015 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18092,IS,,ISO 10110-6:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 6: Tolérances de centrage,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,"[35994,55772]","['en','fr']",10,
Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Gives rules for indicating centring tolerances for optical elements. Applies to rotationally symmetric optical systems only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-6:1996/Cor 1:1999 - **Identifier:** ISO 10110-6:1996/Cor 1:1999 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 10110-6 | ISO 10110-6:2015 - **Withdrawn / published date:** 1999-04-01 _(verified: appears in the quote below)_ > 31636,IS,Cor,ISO 10110-6:1996/Cor 1:1999,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances — Technical Corrigendum 1,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 6: Tolérances de centrage — Rectificatif technique 1,1999-04-01,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,"[35994,55772]","['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-6:2015 - **Identifier:** ISO 10110-6:2015 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-6:2025 - **Withdrawn / published date:** 2015-07-23 _(verified: appears in the quote below)_ > 55772,IS,,ISO 10110-6:2015,Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 6: Tolérances de centrage,2015-07-23,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,"[18092,31636]",[82181],"['en','fr']",21,"ISO 10110-6:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.
ISO 10110-6:2015 specifies rules for indicating centring tolerances for optical elements, subassemblies, and assemblies.
ISO 10110-6:2015 applies to Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-7:1996 - **Identifier:** ISO 10110-7:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-7:2008 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18093,IS,,ISO 10110-7:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 7: Tolérances d'imperfection de surface,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[42012],"['en','fr']",14,"
Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Specifies the indication of the level of acceptability of surface imperfections (scratches, pits, coating blemishes etc.) within the effective ape Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-7:2008 - **Identifier:** ISO 10110-7:2008 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-7:2017 - **Withdrawn / published date:** 2008-02-11 _(verified: appears in the quote below)_ > 42012,IS,,ISO 10110-7:2008,Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 7: Tolérances d'imperfection de surface,2008-02-11,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,[18093],[65444],"['en','fr']",6,"
ISO 10110-7:2008 specifies the indication of the level of acceptability of surface imperfections within the effective aperture of individual optical elements and optical assemblies. These include localized surface imperfections, edge chips and long scratches.
ISO 10110-7:2008 applies to transmitting and reflectin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-8:1997 - **Identifier:** ISO 10110-8:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 8: Surface texture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-8:2010 | ISO/WD 10110-8 - **Withdrawn / published date:** 1997-10-23 _(verified: appears in the quote below)_ > 21005,IS,,ISO 10110-8:1997,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 8: Surface texture,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 8: État de surface,1997-10-23,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,"[46553,37992]","['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-8:2010 - **Identifier:** ISO 10110-8:2010 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture; roughness and waviness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-8:2019 - **Withdrawn / published date:** 2010-09-16 _(verified: appears in the quote below)_ > 46553,IS,,ISO 10110-8:2010,Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture; roughness and waviness,Optique et photonique — Indications sur les dessins pour éléments et systèmes optiques — Partie 8: État de surface; rugosité et ondulation,2010-09-16,2,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,[21005],[69532],"['en','fr']",19,"
ISO 10110 specifies the presentation of design and functional requirements for optical elements in technical drawings used for manufacturing and inspection.
This part of ISO 10110 specifies rules for the indication of the surface texture of optical elements. Surface texture is the characteristic of a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10110-9:1996 - **Identifier:** ISO 10110-9:1996 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10110-9:2016 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 18094,IS,,ISO 10110-9:1996,Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating,Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 9: Traitement de surface et revêtement,1996-03-07,1,"['37.020','01.100.20']",ISO/TC 172/SC 1,9599,,[63596],"['en','fr']",6,
Specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. Gives rules for indicating the treatments and coatings applied to optical surfaces for functional and/or protective purposes.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10111:2000 - **Identifier:** ISO 10111:2000 _(verified: appears in the quote below)_ - **Item title:** Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10111:2019 - **Withdrawn / published date:** 2000-06-29 _(verified: appears in the quote below)_ > 32969,IS,,ISO 10111:2000,Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods,Revêtements métalliques et autres revêtements inorganiques — Mesurage de la masse surfacique — Présentation des méthodes d'analyse gravimétrique et chimique,2000-06-29,1,"['25.220.20','25.220.40']",ISO/TC 107,9599,,[73284],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10113:1991 - **Identifier:** ISO 10113:1991 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Sheet and strip — Determination of plastic strain ratio _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10113:2006 - **Withdrawn / published date:** 1991-05-02 _(verified: appears in the quote below)_ > 18099,IS,,ISO 10113:1991,Metallic materials — Sheet and strip — Determination of plastic strain ratio,Matériaux métalliques — Tôles et bandes — Détermination du coefficient d'anisotropie plastique,1991-05-02,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[35930],"['en','fr']",3,"Specifies a method for determining the plastic strain ratio of flat metallic products. Describes the principle, the test equipment, the test piece, the test procedure, the expression of results, and the contents of the test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10113:2006 - **Identifier:** ISO 10113:2006 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Sheet and strip — Determination of plastic strain ratio _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10113:2020 - **Withdrawn / published date:** 2006-08-31 _(verified: appears in the quote below)_ > 35930,IS,,ISO 10113:2006,Metallic materials — Sheet and strip — Determination of plastic strain ratio,Matériaux métalliques — Tôles et bandes — Détermination du coefficient d'anisotropie plastique,2006-08-31,2,['77.040.10'],ISO/TC 164/SC 2,9599,[18099],[69770],"['en','fr']",10,ISO 10113:2006 specifies a method for determining the plastic strain ratio of flat products (sheet and strip) made of metallic materials.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10115:1997 - **Identifier:** ISO 10115:1997 _(verified: appears in the quote below)_ - **Item title:** Oil of tarragon (Artemisia dracunculus L.), French type _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10115:2013 - **Withdrawn / published date:** 1997-05-01 _(verified: appears in the quote below)_ > 18101,IS,,ISO 10115:1997,"Oil of tarragon (Artemisia dracunculus L.), French type","Huile essentielle d'estragon (Artemisia dracunculus L.), type français",1997-05-01,1,['71.100.60'],ISO/TC 54,9599,,[56159],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10119:1992 - **Identifier:** ISO 10119:1992 _(verified: appears in the quote below)_ - **Item title:** Carbon fibre — Determination of density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10119:2002 - **Withdrawn / published date:** 1992-10-21 _(verified: appears in the quote below)_ > 18106,IS,,ISO 10119:1992,Carbon fibre — Determination of density,Fibres de carbone — Détermination de la masse volumique,1992-10-21,1,['59.100.20'],ISO/TC 61/SC 13,9599,,[29777],"['en','fr']",8,"Specifies three methods for the determination of the density of desized carbon fibre yarn: liquid-displacemenmt method, sink/float method, density-gradient column method. The last method is the reference method. The determination of density may also be carried out on sized fibre by agreement between customer and supplier.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10119:2002 - **Identifier:** ISO 10119:2002 _(verified: appears in the quote below)_ - **Item title:** Carbon fibre — Determination of density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10119:2020 - **Withdrawn / published date:** 2002-06-13 _(verified: appears in the quote below)_ > 29777,IS,,ISO 10119:2002,Carbon fibre — Determination of density,Fibre de carbone — Détermination de la masse volumique,2002-06-13,2,['59.100.20'],ISO/TC 61/SC 13,9599,[18106],[75240],"['en','fr']",10,This International Standard specifies three methods for the determination of the density of carbon fibre yarn:
Method C is the reference method.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1012:1973 - **Identifier:** ISO 1012:1973 _(verified: appears in the quote below)_ - **Item title:** Photography — Colour film for general use — Sizes of sheet material _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1012:1991 - **Withdrawn / published date:** 1973-09-01 _(verified: appears in the quote below)_ > 5479,IS,,ISO 1012:1973,Photography — Colour film for general use — Sizes of sheet material,Photographie — Films semi-rigides en couleurs pour usage général — Dimensions,1973-09-01,1,['37.040.20'],ISO/TC 42,9599,,[5480],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1012:1991 - **Identifier:** ISO 1012:1991 _(verified: appears in the quote below)_ - **Item title:** Photography — Film dimensions — Pictorial sheets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1012:1998 - **Withdrawn / published date:** 1991-05-16 _(verified: appears in the quote below)_ > 5480,IS,,ISO 1012:1991,Photography — Film dimensions — Pictorial sheets,Photographie — Dimensions des films — Films en feuilles pour prise de vue,1991-05-16,2,['37.040.20'],ISO/TC 42,9599,[5479],[25440],['en'],4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10120:1991 - **Identifier:** ISO 10120:1991 _(verified: appears in the quote below)_ - **Item title:** Carbon fibre — Determination of linear density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1889:1997 - **Withdrawn / published date:** 1991-12-16 _(verified: appears in the quote below)_ > 18107,IS,,ISO 10120:1991,Carbon fibre — Determination of linear density,Fibres de carbone — Détermination de la masse linéique,1991-12-16,1,['59.100.20'],ISO/TC 61/SC 13,9599,,[23634],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10122:1995 - **Identifier:** ISO 10122:1995 _(verified: appears in the quote below)_ - **Item title:** Reinforcement materials — Tubular braided sleeves — Basis for a specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10122:2014 - **Withdrawn / published date:** 1995-06-08 _(verified: appears in the quote below)_ > 18109,IS,,ISO 10122:1995,Reinforcement materials — Tubular braided sleeves — Basis for a specification,Produits de renfort — Gaines tressées — Base de spécification,1995-06-08,1,['59.100.01'],ISO/TC 61/SC 13,9599,,[59254],"['en','fr']",5,Provides a basis for specifications applicable to tubular braided sleeves used as reinforcements in plastics. Deals with tubular sleeves braided from all types of yarn or roving.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10123:1990 - **Identifier:** ISO 10123:1990 _(verified: appears in the quote below)_ - **Item title:** Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10123:2013 - **Withdrawn / published date:** 1990-11-15 _(verified: appears in the quote below)_ > 18110,IS,,ISO 10123:1990,Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens,Adhésifs — Détermination de la résistance au cisaillement des adhésifs anaérobies sur assemblage type axe-bague,1990-11-15,1,['83.180'],ISO/TC 61/SC 11,9599,,[60413],"['en','fr']",4,Also applicable to liquid adhesives used for locking and sealing threaded fasteners and to other adhesives. The test is for ranking and quality control of adhesives; the result does not reflect the performance of the materials in service. Determination of the force required to shear the adhesive joint formed between a metal pin and a metal collar. The static shear strength is calculated fr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10124:1994 - **Identifier:** ISO 10124:1994 _(verified: appears in the quote below)_ - **Item title:** Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10893-8:2011 - **Withdrawn / published date:** 1994-12-15 _(verified: appears in the quote below)_ > 18111,IS,,ISO 10124:1994,Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections,Tubes en acier sans soudure et soudés (sauf à l'arc sous flux) pour service sous pression — Contrôle par ultrasons pour la détection des dédoublures,1994-12-15,1,"['77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,[44669],"['en','fr']",5,"
Specifies requirements for ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections, according to four different acceptance levels. Covers the inspection of tubes with an outside diameter greater than 30 mm. Does not specify a lower li Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10126-1:1991 - **Identifier:** ISO 10126-1:1991 _(verified: appears in the quote below)_ - **Item title:** Banking — Procedures for message encipherment (wholesale) — Part 1: General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 10126-1 | ISO/NP 10126-1 - **Withdrawn / published date:** 1991-10-31 _(verified: appears in the quote below)_ > 18113,IS,,ISO 10126-1:1991,Banking — Procedures for message encipherment (wholesale) — Part 1: General principles,Banque — Procédures de chiffrement de messages (service aux entreprises) — Partie 1: Principes généraux,1991-10-31,1,['35.240.40'],ISO/TC 68/SC 2,9599,,"[36400,42331]","['en','fr']",18,"
Gives terms and definitions. Defines procedures in order to protect financial messages exchanged through any communications architecture. Annex A forms an integral part of this standard. Annexes B, C and D are for information only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10126-2:1991 - **Identifier:** ISO 10126-2:1991 _(verified: appears in the quote below)_ - **Item title:** Banking — Procedures for message encipherment (wholesale) — Part 2: DEA algorithm _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 10126-2 | ISO/NP 10126-2 - **Withdrawn / published date:** 1991-07-18 _(verified: appears in the quote below)_ > 18114,IS,,ISO 10126-2:1991,Banking — Procedures for message encipherment (wholesale) — Part 2: DEA algorithm,Banque — Procédures de chiffrement de messages (service aux entreprises) — Partie 2: Algorithme DEA,1991-07-18,1,['35.240.40'],ISO/TC 68/SC 2,9599,,"[36401,42332]","['en','fr']",3,"DEA may be used as a suitable algorithm to implement ISO 10126-1, and is specified in ANSI X3.92. Keys shall be managed in accordance with ISO 8732.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10129:2006 - **Identifier:** ISO 10129:2006 _(verified: appears in the quote below)_ - **Item title:** Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10129:2017 - **Withdrawn / published date:** 2006-02-02 _(verified: appears in the quote below)_ > 36809,IS,,ISO 10129:2006,Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions,Paliers lisses — Essai des matériaux antifriction — Résistance à la corrosion par des lubrifiants dans des conditions statiques,2006-02-02,1,['21.100.10'],ISO/TC 123/SC 2,9599,[18116],[70399],['en'],5,ISO 10129:2006 establishes a test of the corrosion-resistance of bearing materials to lubricants. It also gives the most important general principles for carrying out such corrosion testing.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1013:1975 - **Identifier:** ISO 1013:1975 _(verified: appears in the quote below)_ - **Item title:** Coke — Determination of bulk density in a large container _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1013:1995 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 5481,IS,,ISO 1013:1975,Coke — Determination of bulk density in a large container,Coke — Détermination de la masse volumique en vrac dans un récipient de grandes dimensions,1975-11-01,1,['75.160.10'],ISO/TC 27/SC 3,9599,,[1968],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1013:1995 - **Identifier:** ISO 1013:1995 _(verified: appears in the quote below)_ - **Item title:** Coke — Determination of bulk density in a large container _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1013:2020 - **Withdrawn / published date:** 1995-06-22 _(verified: appears in the quote below)_ > 1968,IS,,ISO 1013:1995,Coke — Determination of bulk density in a large container,Coke — Détermination de la masse volumique en vrac dans un récipient de grandes dimensions,1995-06-22,2,['75.160.10'],ISO/TC 27/SC 3,9599,[5481],[79749],['en'],2,Cancels and replaces the first edition (1975). Specifies a method for the determination of the bulk density of coke in a large container such as a wagon or skip.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10133:1994 - **Identifier:** ISO 10133:1994 _(verified: appears in the quote below)_ - **Item title:** Small craft — Electrical systems — Extra-low-voltage d.c. installations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10133:2000 - **Withdrawn / published date:** 1994-11-03 _(verified: appears in the quote below)_ > 18121,IS,,ISO 10133:1994,Small craft — Electrical systems — Extra-low-voltage d.c. installations,Navires de plaisance — Systèmes électriques — Installations à très basse tension à courant continu,1994-11-03,1,['47.080'],ISO/TC 188,9599,,[27317],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10133:2000 - **Identifier:** ISO 10133:2000 _(verified: appears in the quote below)_ - **Item title:** Small craft — Electrical systems — Extra-low-voltage d.c. installations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10133:2012 - **Withdrawn / published date:** 2000-12-07 _(verified: appears in the quote below)_ > 27317,IS,,ISO 10133:2000,Small craft — Electrical systems — Extra-low-voltage d.c. installations,Petits navires — Systèmes électriques — Installations à très basse tension à courant continu,2000-12-07,2,['47.080'],ISO/TC 188,9599,[18121],[45867],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10133:2012 - **Identifier:** ISO 10133:2012 _(verified: appears in the quote below)_ - **Item title:** Small craft — Electrical systems — Extra-low-voltage d.c. installations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13297:2020 - **Withdrawn / published date:** 2012-12-11 _(verified: appears in the quote below)_ > 45867,IS,,ISO 10133:2012,Small craft — Electrical systems — Extra-low-voltage d.c. installations,Petits navires — Systèmes électriques — Installations à très basse tension à courant continu,2012-12-11,3,['47.080'],ISO/TC 188,9599,[27317],[69551],"['en','fr']",16,"ISO 10133:2012 establishes the requirements for the design, construction and installation of extra-low-voltage direct current (d.c.) electrical systems which operate at nominal potentials of 50 V d.c. or less on small craft of hull length up to 24 m. Conductors that are part of an outboard engine assembly and that do not extend beyond the outboard engine manufacturer's supplied cowling are not included.
Additional informati Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10134:1993 - **Identifier:** ISO 10134:1993 _(verified: appears in the quote below)_ - **Item title:** Small craft — Electrical devices — Lightning protection _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10134:2003 - **Withdrawn / published date:** 1993-02-25 _(verified: appears in the quote below)_ > 18122,IS,,ISO 10134:1993,Small craft — Electrical devices — Lightning protection,Navires de plaisance — Dispositifs électriques — Protection contre la foudre,1993-02-25,1,['47.080'],ISO/TC 188,9599,,[34175],"['en','fr']",6,"
Establishes the requirements for the design, construction, materials and installation of lightning protection equipment when fitted on small craft of less than 24 m length of metal hull or non-metallic hull.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10134:2003 - **Identifier:** ISO 10134:2003 _(verified: appears in the quote below)_ - **Item title:** Small craft — Electrical devices — Lightning-protection systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10134:2020 - **Withdrawn / published date:** 2003-09-02 _(verified: appears in the quote below)_ > 34175,IS,,ISO 10134:2003,Small craft — Electrical devices — Lightning-protection systems,Petits navires — Dispositifs électriques — Dispositifs de protection contre la foudre,2003-09-02,2,['47.080'],ISO/TC 188,9599,[18122],[75622],"['en','fr']",9,"ISO 10134:2003 establishes guidelines for the design, construction and installation of lightning-protection systems fitted on small craft of hull length up to 24 m.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10135:1994 - **Identifier:** ISO 10135:1994 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Simplified representation of moulded, cast and forged parts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10135:2007 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 18123,IS,,ISO 10135:1994,"Technical drawings — Simplified representation of moulded, cast and forged parts","Dessins techniques — Représentation simplifiée des pièces moulées, matricées et estampées",1994-09-29,1,['01.100.20'],ISO/TC 10/SC 6,9599,,[33258],"['en','fr']",9,"Specifies rules and conventions for the simplified representation of moulded, cast and forged parts on technical drawings. Also specifies the proportions and dimensions of the graphical symbols used for this representation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10137:1992 - **Identifier:** ISO 10137:1992 _(verified: appears in the quote below)_ - **Item title:** Bases for design of structures — Serviceability of buildings against vibration _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10137:2007 - **Withdrawn / published date:** 1992-04-23 _(verified: appears in the quote below)_ > 18131,IS,,ISO 10137:1992,Bases for design of structures — Serviceability of buildings against vibration,Bases du calcul des constructions — Aptitude au service des bâtiments sous vibrations,1992-04-23,1,"['91.080.01','91.120.25']",ISO/TC 98/SC 2,9599,,[37070],['en'],32,"Gives recommendations and covers three recipients of vibrations: a) human occupancy in buildings and on pedestrian bridges, b) the contents of the building, c) the structure of the building. Applies to buildings, pedestrian bridges and walkways found within buildings or connecting them.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10139-1:1991 - **Identifier:** ISO 10139-1:1991 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Resilient lining materials for removable dentures — Part 1: Short-term materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10139-1:2005 - **Withdrawn / published date:** 1991-12-12 _(verified: appears in the quote below)_ > 18133,IS,,ISO 10139-1:1991,Dentistry — Resilient lining materials for removable dentures — Part 1: Short-term materials,Produits et matériel pour l'art dentaire — Produits souples pour intrados de prothèses dentaires amovibles — Partie 1: Produits à court terme,1991-12-12,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[28274],"['en','fr']",5,"Specifies requirements for the physical properties, test methods, packaging, marking, and manufacturer's instructions.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10139-1:2005 - **Identifier:** ISO 10139-1:2005 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10139-1:2018 - **Withdrawn / published date:** 2005-02-10 _(verified: appears in the quote below)_ > 28274,IS,,ISO 10139-1:2005,Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use,Art dentaire — Produits souples pour intrados de prothèses dentaires amovibles — Partie 1: Produits pour usage à court terme,2005-02-10,2,['11.060.10'],ISO/TC 106/SC 2,9599,[18133],[68195],"['en','fr']",10,"ISO 10139-1:2005 specifies requirements for the physical properties, test methods, packaging, marking and manufacturer's instructions for denture lining materials suitable for short-term use.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10139-1:2005/Cor 1:2006 - **Identifier:** ISO 10139-1:2005/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10139-1:2018 - **Withdrawn / published date:** 2006-03-03 _(verified: appears in the quote below)_ > 43972,IS,Cor,ISO 10139-1:2005/Cor 1:2006,Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use — Technical Corrigendum 1,Art dentaire — Produits souples pour intrados de prothèses dentaires amovibles — Partie 1: Produits pour usage à court terme — Rectificatif technique 1,2006-03-03,2,['11.060.10'],ISO/TC 106/SC 2,9599,,[68195],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10139-2:1999 - **Identifier:** ISO 10139-2:1999 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10139-2:2009 - **Withdrawn / published date:** 1999-10-07 _(verified: appears in the quote below)_ > 21149,IS,,ISO 10139-2:1999,Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use,Art dentaire — Produits souples pour intrados de prothèses dentaires amovibles — Partie 2: Produits pour utilisation de longue durée,1999-10-07,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[50348],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10139-2:2009 - **Identifier:** ISO 10139-2:2009 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10139-2:2016 - **Withdrawn / published date:** 2009-07-23 _(verified: appears in the quote below)_ > 50348,IS,,ISO 10139-2:2009,Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use,Art dentaire — Produits souples pour intrados de prothèses dentaires amovibles — Partie 2: Produits pour usage à long terme,2009-07-23,2,['11.060.10'],ISO/TC 106/SC 2,9599,[21149],[70317],"['en','fr']",12,"ISO 10139-2:2009 specifies requirements for softness, adhesion, water sorption and water solubility as well as for packaging, marking and manufacturer's instructions for soft denture lining materials suitable for long-term use. These materials may also be used for maxillofacial prostheses.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1014:1975 - **Identifier:** ISO 1014:1975 _(verified: appears in the quote below)_ - **Item title:** Coke — Determination of true relative density, apparent relative density and porosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1014:1985 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 5482,IS,,ISO 1014:1975,"Coke — Determination of true relative density, apparent relative density and porosity","Coke — Détermination de la densité relative vraie, de la densité relative apparente et de la porosité",1975-11-01,1,['75.160.10'],ISO/TC 27,9599,,[5483],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1014:1985 - **Identifier:** ISO 1014:1985 _(verified: appears in the quote below)_ - **Item title:** Coke — Determination of true relative density, apparent relative density and porosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1014:2021 - **Withdrawn / published date:** 1985-09-19 _(verified: appears in the quote below)_ > 5483,IS,,ISO 1014:1985,"Coke — Determination of true relative density, apparent relative density and porosity","Coke — Détermination de la densité relative vraie, de la densité relative apparente et de la porosité",1985-09-19,2,['75.160.10'],ISO/TC 27/SC 3,9599,[5482],[79750],"['en','fr']",3,"For calculating the true relative density the mass of water displaced by a known masss of dry coke, ground to pass a sieve of nominal size of openings 212 um, is determined using a pyknometer. - The volume of a large amount of coke is determined by displacement in water; dividing the mass of the dried coke by the mass of an equal volume of water gives the apparent relative density. - The porosity is Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1014:2021 - **Identifier:** ISO 1014:2021 _(verified: appears in the quote below)_ - **Item title:** Coke — Determination of true relative density, apparent relative density and porosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1014-2:2025 | ISO 1014-3:2025 | ISO/PWI 1014-1 | ISO/PWI 1014-2 | ISO 1014-1:2025 | ISO/PWI 1014-3 - **Withdrawn / published date:** 2021-11-09 _(verified: appears in the quote below)_ > 79750,IS,,ISO 1014:2021,"Coke — Determination of true relative density, apparent relative density and porosity","Coke — Détermination de la densité relative vraie, de la densité relative apparente et de la porosité",2021-11-09,3,['75.160.10'],ISO/TC 27/SC 3,9599,"[5483,23119]","[88041,88042,88035,88036,88040,88037]",['en'],10,"
This document specifies methods for
a) determining the true relative density of coke, crushed to <212 µm, in relation to water;
NOTE “True relative density” varies according to the displacement liquid used.
b) determining the apparent relative density of coke, i.e. the ratio of the mass of a volume of dry coke to the mass of an equal vol Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-1:2010 - **Identifier:** ISO 10140-1:2010 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-1:2016 - **Withdrawn / published date:** 2010-08-17 _(verified: appears in the quote below)_ > 42092,IS,,ISO 10140-1:2010,Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 1: Règles d'application pour produits particuliers,2010-08-17,1,['91.120.20'],ISO/TC 43/SC 2,9599,"[35600,34246,2306,43822,3958,34245,2174,3966,2322]",[67232],"['en','fr']",32,"
ISO 10140-1:2010 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and additional test information to be reported.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-1:2010/Amd 1:2012 - **Identifier:** ISO 10140-1:2010/Amd 1:2012 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products — Amendment 1: Guidelines for the determination of the sound reduction index of joints filled with fillers and or seals _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-1:2016 - **Withdrawn / published date:** 2012-01-19 _(verified: appears in the quote below)_ > 52704,IS,Amd,ISO 10140-1:2010/Amd 1:2012,Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products — Amendment 1: Guidelines for the determination of the sound reduction index of joints filled with fillers and or seals,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 1: Règles d'application pour produits particuliers — Amendement 1: Lignes directrices pour la détermination de l'indice de réduction acoustique de joints comblés de matière de remplissage et/ou d'éléments d'étanchéité,2012-01-19,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[67232],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-1:2010/Amd 2:2014 - **Identifier:** ISO 10140-1:2010/Amd 2:2014 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products — Amendment 2: Rainfall sound _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-1:2016 - **Withdrawn / published date:** 2014-05-22 _(verified: appears in the quote below)_ > 55995,IS,Amd,ISO 10140-1:2010/Amd 2:2014,Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products — Amendment 2: Rainfall sound,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 1: Règles d'application pour produits particuliers — Amendement 2: Bruit produit par la pluie,2014-05-22,1,['91.120.20'],ISO/TC 43/SC 2,9599,[40237],[67232],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-1:2016 - **Identifier:** ISO 10140-1:2016 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-1:2021 - **Withdrawn / published date:** 2016-08-05 _(verified: appears in the quote below)_ > 67232,IS,,ISO 10140-1:2016,Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 1: Règles d'application pour produits particuliers,2016-08-05,2,['91.120.20'],ISO/TC 43/SC 2,9599,"[52704,42092,55995]",[73910],"['en','fr']",55,"ISO 10140-1:2016 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and additional test information for reporting. The general procedures for airborne and impact Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-2:2010 - **Identifier:** ISO 10140-2:2010 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-2:2021 | ISO/PWI 10140-2 - **Withdrawn / published date:** 2010-08-17 _(verified: appears in the quote below)_ > 42088,IS,,ISO 10140-2:2010,Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 2: Mesurage de l'isolation au bruit aérien,2010-08-17,1,['91.120.20'],ISO/TC 43/SC 2,9599,"[35600,34246,2306,43822,3958,34245,2174,3966,2322]","[79487,70961]","['en','fr']",13,"
ISO 10140-2:2010 specifies a laboratory method for measuring the airborne sound insulation of building products, such as walls, floors, doors, windows, shutters, façade elements, façades, glazing, small technical elements, for instance transfer air devices, airing Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-3:2010 - **Identifier:** ISO 10140-3:2010 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-3:2021 | ISO/PWI 10140-3 - **Withdrawn / published date:** 2010-08-17 _(verified: appears in the quote below)_ > 42089,IS,,ISO 10140-3:2010,Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 3: Mesurage de l'isolation au bruit de choc,2010-08-17,1,['91.120.20'],ISO/TC 43/SC 2,9599,"[35600,34246,2306,43822,3958,34245,2174,3966,2322]","[79483,70962]","['en','fr']",12,"
ISO 10140-3:2010 specifies laboratory methods for measuring the impact sound insulation of floor assemblies.
The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation cap Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-3:2010/Amd 1:2015 - **Identifier:** ISO 10140-3:2010/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-3:2021 | ISO/PWI 10140-3 - **Withdrawn / published date:** 2015-06-01 _(verified: appears in the quote below)_ > 59745,IS,Amd,ISO 10140-3:2010/Amd 1:2015,Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation — Amendment 1,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 3: Mesurage de l'isolation au bruit de choc — Amendement 1,2015-06-01,1,['91.120.20'],ISO/TC 43/SC 2,9599,"[61912,59746]","[79483,70962]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-4:2010 - **Identifier:** ISO 10140-4:2010 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-4:2021 | ISO/FDIS 10140-4 - **Withdrawn / published date:** 2010-08-17 _(verified: appears in the quote below)_ > 42090,IS,,ISO 10140-4:2010,Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 4: Exigences et modes opératoires de mesure,2010-08-17,1,['91.120.20'],ISO/TC 43/SC 2,9599,"[35600,34246,2306,43822,3958,34245,2174,3966,2322]","[73911,64963]","['en','fr']",12,
ISO 10140-4:2010 specifies the basic measurement procedures for airborne and impact sound insulation in laboratory test facilities.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-5:2010 - **Identifier:** ISO 10140-5:2010 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-5:2021 | ISO/PWI 10140-5 - **Withdrawn / published date:** 2010-08-17 _(verified: appears in the quote below)_ > 42087,IS,,ISO 10140-5:2010,Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 5: Exigences relatives aux installations et appareillage d'essai,2010-08-17,1,['91.120.20'],ISO/TC 43/SC 2,9599,"[35600,34246,2306,43822,3958,34245,2174,3966,2322]","[79482,70963]","['en','fr']",35,"ISO 10140-5:2010 specifies laboratory test facilities and equipment for sound insulation measurements of building elements, such as components and materials, building elements, technical elements (small building elements) and sound insul Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10140-5:2010/Amd 1:2014 - **Identifier:** ISO 10140-5:2010/Amd 1:2014 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment — Amendment 1: Rainfall sound _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10140-5:2021 | ISO/PWI 10140-5 - **Withdrawn / published date:** 2014-04-29 _(verified: appears in the quote below)_ > 55996,IS,Amd,ISO 10140-5:2010/Amd 1:2014,Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment — Amendment 1: Rainfall sound,Acoustique — Mesurage en laboratoire de l'isolation acoustique des éléments de construction — Partie 5: Exigences relatives aux installations et appareillage d'essai — Amendement 1: Bruit produit par la pluie,2014-04-29,1,['91.120.20'],ISO/TC 43/SC 2,9599,[40237],"[79482,70963]","['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10143:1995 - **Identifier:** ISO 10143:1995 _(verified: appears in the quote below)_ - **Item title:** Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10143:2014 - **Withdrawn / published date:** 1995-11-30 _(verified: appears in the quote below)_ > 18137,IS,,ISO 10143:1995,Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules,Produits carbonés utilisés pour la production de l'aluminium — Coke calciné — Détermination de la résistivité électrique granulaire,1995-11-30,1,['71.100.10'],ISO/TC 226,9599,,[63046],"['en','fr']",4,
Describes a method for the determination of the electrical resistivity of granular carbon (calcined or graphitized) used in the manufacture of carbon electrode for the production of aluminium.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10143:2014 - **Identifier:** ISO 10143:2014 _(verified: appears in the quote below)_ - **Item title:** Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10143:2019 - **Withdrawn / published date:** 2014-07-01 _(verified: appears in the quote below)_ > 63046,IS,,ISO 10143:2014,Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules,Produits carbonés utilisés pour la production de l'aluminium — Coke calciné — Détermination de la résistivité électrique granulaire,2014-07-01,2,['71.100.10'],ISO/TC 226,9599,[18137],[73944],['en'],5,ISO 10143:2014 specifies a method for the determination of the electrical resistivity of granular carbon (calcined or graphitized) used in the manufacture of carbon electrodes for the production of aluminium. The measurement of electrical resistivity assists in assessing the extent of coke calcination. The electrical resistivi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10144:1991 - **Identifier:** ISO 10144:1991 _(verified: appears in the quote below)_ - **Item title:** Certification scheme for steel bars and wires for the reinforcement of concrete structures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10144:2018 - **Withdrawn / published date:** 1991-06-20 _(verified: appears in the quote below)_ > 18138,IS,,ISO 10144:1991,Certification scheme for steel bars and wires for the reinforcement of concrete structures,Système particulier de certification des barres et fils d'acier pour le renforcement des constructions en béton,1991-06-20,1,"['91.080.40','77.140.15']",ISO/TC 17/SC 16,9599,,[67969],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10145-1:1993 - **Identifier:** ISO 10145-1:1993 _(verified: appears in the quote below)_ - **Item title:** End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10145-1:2016 - **Withdrawn / published date:** 1993-08-19 _(verified: appears in the quote below)_ > 18139,IS,,ISO 10145-1:1993,End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank,"Fraises cylindriques deux tailles à plaquettes hélicoïdales en métaux-durs, brasées — Partie 1: Dimensions des fraises à queue cylindrique",1993-08-19,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[68787],"['en','fr']",2,"
Specifies the general dimensions of two types of end mills: end mills with plain parallel shank, in accordance with ISO 3338-1, end mills with flatted parallel shank, in accordance with ISO 3338-2. Applies to right-hand and left-hand end mills, irrespective of helix angle and number of flutes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10145-2:1993 - **Identifier:** ISO 10145-2:1993 _(verified: appears in the quote below)_ - **Item title:** End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10145-2:2016 - **Withdrawn / published date:** 1993-08-19 _(verified: appears in the quote below)_ > 18140,IS,,ISO 10145-2:1993,End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank,"Fraises cylindriques deux tailles à plaquettes hélicoïdales en métaux-durs, brasées — Partie 2: Dimensions des fraises à queue cône 7/24",1993-08-19,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[68788],"['en','fr']",2,"Specifies the general dimensions of two types of end mills: end mills for manual changing, in accordance with ISO 297, end mills for automatic tool changers, in accordance with ISO 7388-1. Applies to right-hand and left-hand end mills, irrespective of helix angle and number of flutes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10146:1997 - **Identifier:** ISO 10146:1997 _(verified: appears in the quote below)_ - **Item title:** Crosslinked polyethylene (PE-X) pipes — Effect of time and temperature on the expected strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10146:2019 - **Withdrawn / published date:** 1997-01-22 _(verified: appears in the quote below)_ > 18141,IS,,ISO 10146:1997,Crosslinked polyethylene (PE-X) pipes — Effect of time and temperature on the expected strength,Tubes en polyéthylène réticulé (PE-X) — Influence du temps et de la température sur la résistance espérée,1997-01-22,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[70973],"['en','fr']",5,"Gives the minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on crosslinked polyethylene (PE-X) pipes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10147:1994 - **Identifier:** ISO 10147:1994 _(verified: appears in the quote below)_ - **Item title:** Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10147:2004 - **Withdrawn / published date:** 1994-12-01 _(verified: appears in the quote below)_ > 18142,IS,,ISO 10147:1994,Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content,Tubes et raccords en polyéthylène réticulé (PE-X) — Estimation du degré de réticulation par le mesurage du taux de gel,1994-12-01,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,,[33600],"['en','fr']",2,Specifies a method for the assessment of the degree of crosslinking in polyethylene pipes and fittings by determination of the gel content by solvent extraction.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10147:2004 - **Identifier:** ISO 10147:2004 _(verified: appears in the quote below)_ - **Item title:** Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10147:2011 - **Withdrawn / published date:** 2004-11-24 _(verified: appears in the quote below)_ > 33600,IS,,ISO 10147:2004,Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content,Tubes et raccords en polyéthylène réticulé (PE-X) — Estimation du degré de réticulation par le mesurage du taux de gel,2004-11-24,2,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,[18142],[54759],"['en','fr']",4,ISO 10147:2004 specifies a method for the assessment of the degree of crosslinking in polyethylene (PE-X) pipes and fittings by determination of the gel content by solvent extraction.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10147:2004/Amd 1:2008 - **Identifier:** ISO 10147:2004/Amd 1:2008 _(verified: appears in the quote below)_ - **Item title:** Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10147:2011 - **Withdrawn / published date:** 2008-05-05 _(verified: appears in the quote below)_ > 43859,IS,Amd,ISO 10147:2004/Amd 1:2008,Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1,Tubes et raccords en polyéthylène réticulé (PE-X) — Estimation du degré de réticulation par le mesurage du taux de gel — Amendement 1,2008-05-05,2,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,,[54759],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1015:1975 - **Identifier:** ISO 1015:1975 _(verified: appears in the quote below)_ - **Item title:** Brown coals and lignites — Determination of moisture content — Direct volumetric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1015:1992 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 5484,IS,,ISO 1015:1975,Brown coals and lignites — Determination of moisture content — Direct volumetric method,Charbons bruns et lignites — Détermination de l'humidité — Méthode volumétrique directe,1975-11-01,1,['73.040'],ISO/TC 27,9599,,[20098],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10153:1991 - **Identifier:** ISO 10153:1991 _(verified: appears in the quote below)_ - **Item title:** Steel — Determination of boron content — Curcumin spectrophotometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10153:1997 - **Withdrawn / published date:** 1991-01-17 _(verified: appears in the quote below)_ > 18148,IS,,ISO 10153:1991,Steel — Determination of boron content — Curcumin spectrophotometric method,Acier — Dosage du bore — Méthode spectrophotométrique à la curcumine,1991-01-17,1,['77.080.20'],ISO/TC 17/SC 1,9599,,[24826],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10156:1990 - **Identifier:** ISO 10156:1990 _(verified: appears in the quote below)_ - **Item title:** Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10156:1996 - **Withdrawn / published date:** 1990-12-20 _(verified: appears in the quote below)_ > 18151,IS,,ISO 10156:1990,Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets,Gaz et mélanges de gaz — Détermination du potentiel d'inflammabilité et d'oxydation pour le choix des raccords de sortie de robinets,1990-12-20,1,"['23.020.35','71.100.20']",ISO/TC 58/SC 2,9599,,[25585],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10156:1996 - **Identifier:** ISO 10156:1996 _(verified: appears in the quote below)_ - **Item title:** Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10156-2:2005 | ISO/WD 10156-1 | ISO 10156:2010 - **Withdrawn / published date:** 1996-02-08 _(verified: appears in the quote below)_ > 25585,IS,,ISO 10156:1996,Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets,Gaz et mélanges de gaz — Détermination du potentiel d'inflammabilité et d'oxydation pour le choix des raccords de sortie de robinets,1996-02-08,2,"['23.020.35','71.100.20']",ISO/TC 58/SC 2,9599,[18151],"[36763,36222,44817]","['en','fr']",12,Specifies two methods for determining whether or not a gas is flammable in air and whether a gas is more or less oxidizing than air. Replaces the first edition.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10156-2:2005 - **Identifier:** ISO 10156-2:2005 _(verified: appears in the quote below)_ - **Item title:** Gas cylinders — Gases and gas mixtures — Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10156:2010 - **Withdrawn / published date:** 2005-08-26 _(verified: appears in the quote below)_ > 36763,IS,,ISO 10156-2:2005,Gas cylinders — Gases and gas mixtures — Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures,Bouteilles à gaz — Gaz et mélanges de gaz — Partie 2: Détermination du pouvoir oxydant des gaz et mélanges de gaz toxiques et corrosifs,2005-08-26,1,"['23.020.35','71.100.20']",ISO/TC 58/SC 2,9599,[25585],[44817],"['en','fr']",7,ISO 10156-2:2005 specifies a test and a calculation method to be used for determining whether or not a gas (or a gas mixture) is more oxidizing than air. It applies only to toxic and corrosive gases and gas mixtures.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10156:2010 - **Identifier:** ISO 10156:2010 _(verified: appears in the quote below)_ - **Item title:** Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10156:2017 - **Withdrawn / published date:** 2010-03-29 _(verified: appears in the quote below)_ > 44817,IS,,ISO 10156:2010,Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets,Gaz et mélanges de gaz — Détermination du potentiel d'inflammabilité et d'oxydation pour le choix des raccords de sortie de robinets,2010-03-29,3,"['23.020.35','71.100.20']",ISO/TC 58/SC 2,9599,"[36763,36222,25585,40404]",[66752],"['en','fr']",25,ISO 10156:2010 specifies methods for determining whether or not a gas or gas mixture is flammable in air and whether a gas or gas mixture is more or less oxidizing than air under atmospheric conditions.
It is intended to be used for the classification of gases and gas mixtures including the sele Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10156:2010/Cor 1:2010 - **Identifier:** ISO 10156:2010/Cor 1:2010 _(verified: appears in the quote below)_ - **Item title:** Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10156:2017 - **Withdrawn / published date:** 2010-08-24 _(verified: appears in the quote below)_ > 56872,IS,Cor,ISO 10156:2010/Cor 1:2010,Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets — Technical Corrigendum 1,Gaz et mélanges de gaz — Détermination du potentiel d'inflammabilité et d'oxydation pour le choix des raccords de sortie de robinets — Rectificatif technique 1,2010-08-24,3,"['23.020.35','71.100.20']",ISO/TC 58/SC 2,9599,,[66752],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10160:1993 - **Identifier:** ISO 10160:1993 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10160:1997 - **Withdrawn / published date:** 1993-04-29 _(verified: appears in the quote below)_ > 18154,IS,,ISO 10160:1993,Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition,Information et documentation — Interconnexion de systèmes ouverts (OSI) — Définition du service d'application pour les prêts entre bibliothèques,1993-04-29,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[22247],"['en','fr']",113, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10160:1997 - **Identifier:** ISO 10160:1997 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10160:2015 - **Withdrawn / published date:** 1997-04-10 _(verified: appears in the quote below)_ > 22247,IS,,ISO 10160:1997,Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition,Information et documentation — Interconnexion de systèmes ouverts (OSI) — Définition du service d'application pour les prêts entre bibliothèques,1997-04-10,2,['35.240.30'],ISO/TC 46/SC 4,9599,[18154],[66169],['en'],58, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10160:1997/Amd 1:2002 - **Identifier:** ISO 10160:1997/Amd 1:2002 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition — Amendment 1: Addition of annex D acknowledging the National Library of Canada as the Maintenance Agency _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10160:2015 - **Withdrawn / published date:** 2002-11-14 _(verified: appears in the quote below)_ > 37447,IS,Amd,ISO 10160:1997/Amd 1:2002,Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition — Amendment 1: Addition of annex D acknowledging the National Library of Canada as the Maintenance Agency,Information et documentation — Interconnexion de systèmes ouverts (OSI) — Définition du service d'application pour les prêts entre bibliothèques — Amendement 1: Addition de l'annexe D reconnaissant la National Library of Canada comme Agence de maintenance,2002-11-14,2,['35.240.30'],ISO/TC 46/SC 4,9599,,[66169],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10161-1:1993 - **Identifier:** ISO 10161-1:1993 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10161-1:1997 - **Withdrawn / published date:** 1993-02-11 _(verified: appears in the quote below)_ > 18155,IS,,ISO 10161-1:1993,Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification,Information et documentation — Interconnexion de systèmes ouverts (OSI) — Spécification du protocole d'application pour les prêts entre bibliothèques — Partie 1: Spécification du protocole,1993-02-11,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[22248],['en'],173, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10161-1:1997 - **Identifier:** ISO 10161-1:1997 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10161-1:2014 - **Withdrawn / published date:** 1997-06-12 _(verified: appears in the quote below)_ > 22248,IS,,ISO 10161-1:1997,Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification,Information et documentation — Interconnexion de systèmes ouverts (OSI) — Spécification du protocole d'application pour les prêts entre bibliothèques — Partie 1: Spécification du protocole,1997-06-12,2,['35.240.30'],ISO/TC 46/SC 4,9599,[18155],[66170],['en'],109, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10161-1:1997/Amd 1:2002 - **Identifier:** ISO 10161-1:1997/Amd 1:2002 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification — Amendment 1: Support for Use of Object Identifier in 'identifier' Parameter of the Extension Data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10161-1:2014 - **Withdrawn / published date:** 2002-11-14 _(verified: appears in the quote below)_ > 37448,IS,Amd,ISO 10161-1:1997/Amd 1:2002,Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification — Amendment 1: Support for Use of Object Identifier in 'identifier' Parameter of the Extension Data,Information et documentation — Interconnexion de systèmes ouverts (OSI) — Spécification du protocole d'application pour les prêts entre bibliothèques — Partie 1: Spécification du protocole — Amendement 1: Support pour l'usage d'identificateur d'object dans les paramètres 'identificateur' des donnéees d'extension,2002-11-14,2,['35.240.30'],ISO/TC 46/SC 4,9599,,[66170],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10161-1:1997/Amd 2:2002 - **Identifier:** ISO 10161-1:1997/Amd 2:2002 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification — Amendment 2: Addition of annex I acknowledging the National Library of Canada as the Maintenance Agency and Registration Authority _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10161-1:2014 - **Withdrawn / published date:** 2002-11-13 _(verified: appears in the quote below)_ > 37449,IS,Amd,ISO 10161-1:1997/Amd 2:2002,Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification — Amendment 2: Addition of annex I acknowledging the National Library of Canada as the Maintenance Agency and Registration Authority,Information et documentation — Interconnexion de systèmes ouverts (OSI) — Spécification du protocole d'application pour les prêts entre bibliothèques — Partie 1: Spécification du protocole — Amendement 2: Addition de l'annexe I reconnaissant la National Library of Canada comme Agence de maintenance et Autorité d'enregistrement,2002-11-13,2,['35.240.30'],ISO/TC 46/SC 4,9599,, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10161-2:1997 - **Identifier:** ISO 10161-2:1997 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 2: Protocol implementation conformance statement (PICS) proforma _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10161-2:2014 - **Withdrawn / published date:** 1997-06-12 _(verified: appears in the quote below)_ > 21389,IS,,ISO 10161-2:1997,Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 2: Protocol implementation conformance statement (PICS) proforma,Information et documentation — Interconnexion de systèmes ouverts (OSI) — Spécification du protocole d'application pour les prêts entre bibliothèques — Partie 2: Proforma d'établissement de conformité pour la mise en oeuvre du protocole (PICS),1997-06-12,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[66171],['en'],38, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1017:1975 - **Identifier:** ISO 1017:1975 _(verified: appears in the quote below)_ - **Item title:** Brown coals and lignites — Determination of acetone-soluble material ('resinous substances') in the benzene extract _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1017:1985 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 5486,IS,,ISO 1017:1975,Brown coals and lignites — Determination of acetone-soluble material ('resinous substances') in the benzene extract,Charbons bruns et lignites — Détermination des matières solubles dans l'acétone de l'extrait au toluène soluble ('substances résineuses'),1975-11-01,1,['73.040'],ISO/TC 27,9599,,[5487],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1017:1985 - **Identifier:** ISO 1017:1985 _(verified: appears in the quote below)_ - **Item title:** Brown coals and lignites — Determination of acetone-soluble material ('resinous substances') in the toluene-soluble extract _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1017:2006 - **Withdrawn / published date:** 1985-12-12 _(verified: appears in the quote below)_ > 5487,IS,,ISO 1017:1985,Brown coals and lignites — Determination of acetone-soluble material ('resinous substances') in the toluene-soluble extract,Charbons bruns et lignites — Détermination des matières solubles dans l'acétone de l'extrait au toluène soluble ('substances résineuses'),1985-12-12,2,['73.040'],ISO/TC 27/SC 5,9599,[5486],[41353],"['en','fr']",2,
A sample of toluene-soluble extract from brown coal or lignite obtained by the procedure describes in ISO 975 is extracted with acetone at a temperature of 18 to 22 °C. The soluble fraction is filtered or centrifuged off and after evaporation of the solvent dried to constant mass. The percentage of acetone-soluble material is calculate Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1017:2006 - **Identifier:** ISO 1017:2006 _(verified: appears in the quote below)_ - **Item title:** Brown coals and lignites — Determination of acetone-soluble material ('resinous substance') in the benzene-soluble extract _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1017:2025 - **Withdrawn / published date:** 2006-11-29 _(verified: appears in the quote below)_ > 41353,IS,,ISO 1017:2006,Brown coals and lignites — Determination of acetone-soluble material ('resinous substance') in the benzene-soluble extract,Charbons bruns et lignites — Détermination des matières solubles dans l'acétone de l'extrait au toluène soluble ('substances résineuses'),2006-11-29,3,['73.040'],ISO/TC 27/SC 5,9599,[5487],[86984],['en'],4,
ISO 1017:2006 specifies a method of determining the mass fraction of acetone-soluble material ('resinous substance') in the benzene-soluble extract from brown coals and lignites.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1018:1975 - **Identifier:** ISO 1018:1975 _(verified: appears in the quote below)_ - **Item title:** Hard coal — Determination of moisture-holding capacity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1018:2019 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 5488,IS,,ISO 1018:1975,Hard coal — Determination of moisture-holding capacity,Houille — Détermination de la capacité de rétention d'humidité,1975-11-01,1,['73.040'],ISO/TC 27/SC 5,9599,,[74448],"['en','fr']",6,"The coal is brought to equilibrium with an atmosphere 96 % relative humidity at 30 °C and then dried to constant mass at 105 to 110 °C. The conditioning of the coal may be carried out either at atmospheric pressure or under reduced pressure. The moisture-holding capacity is reported as a percentage, by mass, of the conditioned moist coal.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 2](https://referencesource.org/iso-standard-supersessions/p/2/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 4](https://referencesource.org/iso-standard-supersessions/p/4/) Last verified: 2026-08-05. Review by: 2027-02-02.