ISO/TS 11135-2:2008 provides guidance for the requirements in ISO 11135-1:2007. It does not repeat the requirements and is not intended to be used in isolation. The exclusions in ISO 11135-1 apply also to this Technical Specification.
This guidance document is intended for people who have a basic knowledge of the principles of EO sterilizati Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11135-2:2008/Cor 1:2009 - **Identifier:** ISO/TS 11135-2:2008/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** Sterilization of health care products — Ethylene oxide — Part 2: Guidance on the application of ISO 11135-1 — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11135:2014 - **Withdrawn / published date:** 2009-02-09 _(verified: appears in the quote below)_ > 53573,TS,Cor,ISO/TS 11135-2:2008/Cor 1:2009,Sterilization of health care products — Ethylene oxide — Part 2: Guidance on the application of ISO 11135-1 — Technical Corrigendum 1,Stérilisation des produits de santé — Oxyde d'éthylène — Partie 2: Directives relatives à l'application de l'ISO 11135-1 — Rectificatif technique 1,2009-02-09,1,['11.080.01'],ISO/TC 198,9599,,[56137],"['en','fr','ru']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11139:2001 - **Identifier:** ISO/TS 11139:2001 _(verified: appears in the quote below)_ - **Item title:** Sterilization of health care products — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11139:2006 - **Withdrawn / published date:** 2001-12-13 _(verified: appears in the quote below)_ > 33945,TS,,ISO/TS 11139:2001,Sterilization of health care products — Vocabulary,Stérilisation des produits de santé — Vocabulaire,2001-12-13,1,"['11.080.01','01.040.11']",ISO/TC 198,9599,,[40168],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11139:2006 - **Identifier:** ISO/TS 11139:2006 _(verified: appears in the quote below)_ - **Item title:** Sterilization of health care products — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11139:2018 - **Withdrawn / published date:** 2006-01-13 _(verified: appears in the quote below)_ > 40168,TS,,ISO/TS 11139:2006,Sterilization of health care products — Vocabulary,Stérilisation des produits de santé — Vocabulaire,2006-01-13,2,"['11.080.01','01.040.11']",ISO/TC 198,9599,[33945],[66262],"['en','fr']",13,"ISO/TS 11139:2006 gives definitions of terms in the field of sterilization technology.
ISO/TS 11139:2006 does not provide requirements for the validation and routine control of a sterilization process, but is intended to contribute fundamentally towards mutual understanding amongst those preparing and using International Standards in the field of sterilization technology.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11155-2:2002 - **Identifier:** ISO/TS 11155-2:2002 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11155-2:2009 - **Withdrawn / published date:** 2002-11-08 _(verified: appears in the quote below)_ > 33427,TS,,ISO/TS 11155-2:2002,Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration,Véhicules routiers — Filtres à air pour l'habitacle — Partie 2: Essai pour le filtrage des gaz,2002-11-08,1,['43.040.60'],ISO/TC 22,9599,,[46274],['en'],17,"ISO/TS 11155-2:2002 specifies a test comprising methods for measuring the dynamic gas adsorption of air filters in the passenger compartments of road vehicles. These laboratory test methods are applicable to air filters that improve air quality by reducing concentrations of gaseous, odorous or hazardous components from ambient or recirculated air, or both, in the vehicle cabin. They provide a means of measuring ai Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11251:2010 - **Identifier:** ISO/TS 11251:2010 _(verified: appears in the quote below)_ - **Item title:** Nanotechnologies — Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11251:2019 - **Withdrawn / published date:** 2010-11-22 _(verified: appears in the quote below)_ > 50339,TS,,ISO/TS 11251:2010,Nanotechnologies — Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry,Nanotechnologies — Caractérisation des composés volatils dans les nanotubes de carbone à simple paroi (SWCNT) utilisant l'analyse des gaz émis par chromatographie en phase gazeuse couplée à la spectrométrie de masse,2010-11-22,1,['07.120'],ISO/TC 229,9599,,[75337],"['en','fr']",10,
ISO/TS 11251:2010 specifies a method for the characterization of volatile components in single-wall carbon nanotubes (SWCNTs) samples using evolved gas analysis/gas chromatograph mass spectrometry (EGA/GCMS).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11308:2011 - **Identifier:** ISO/TS 11308:2011 _(verified: appears in the quote below)_ - **Item title:** Nanotechnologies — Characterization of single-wall carbon nanotubes using thermogravimetric analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11308:2020 - **Withdrawn / published date:** 2011-11-08 _(verified: appears in the quote below)_ > 50357,TS,,ISO/TS 11308:2011,Nanotechnologies — Characterization of single-wall carbon nanotubes using thermogravimetric analysis,Nanotechnologies — Caractérisation des nanotubes en carbone monofeuillet par analyse thermogravimétrique,2011-11-08,1,['07.120'],ISO/TC 229,9599,,[69548],"['en','fr']",22,"ISO/TS 11308:2011 provides guidelines for the characterization of SWCNT-containing samples by the use of TGA, performed in an air environment.
Guidance is provided on purity assessment of SWCNT samples through a quantitative measure of the non-carbon impurity (i.e. metal catalyst) level within the material.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11365:2011 - **Identifier:** ISO/TS 11365:2011 _(verified: appears in the quote below)_ - **Item title:** Petroleum and related products — Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11365:2017 - **Withdrawn / published date:** 2011-03-16 _(verified: appears in the quote below)_ > 54429,TS,,ISO/TS 11365:2011,Petroleum and related products — Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids,Pétrole et produits connexes — Lignes directrices pour la maintenance et l'utilisation des fluides de régulation de turbines à base d'esters de triaryl phosphate,2011-03-16,1,['75.120'],ISO/TC 28/SC 4,9599,,[68230],"['en','fr']",19,"ISO/TS 11365:2011 applies to the use of triaryl phosphate esters as fire-resistant fluids for turbine control and other hydraulic systems in power generation.
ISO/TS 11365:2011 is intended to
ISO/TS 11366:2011 applies to mineral oils used as lubricating oils and to control fluids used to lubricate steam, gas and combined cycle turbines in service. The lubricants considered in ISO/TS 11366:2011 are those classified in ISO 6743-5 and specified in ISO 8068.
ISO/TS 11366:2011 is intended to
ISO 11405:2003 gives guidance on substrate selection, storage and handling as well as essential characteristics of different test methods for quality testing of the adhesive bond between restorative dental materials and tooth structure, i.e. enamel and dentine. It specifies two bond strength measurements tests (tensile and shear), a test for measurement of marginal gaps around fillings and a microleakage test, as well as giving recommendations on clinical usag Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11405:2015 - **Identifier:** ISO/TS 11405:2015 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Testing of adhesion to tooth structure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP TS 11405 - **Withdrawn / published date:** 2015-01-13 _(verified: appears in the quote below)_ > 62898,TS,,ISO/TS 11405:2015,Dentistry — Testing of adhesion to tooth structure,Médecine bucco-dentaire — Essais d'adhésion à la structure de la dent,2015-01-13,3,['11.060.10'],ISO/TC 106/SC 1,9599,[31486],[77251],"['en','fr']",12,"
ISO/TS 11405:2015 gives guidance on substrate selection, storage, and handling as well as essential characteristics of different test methods for quality testing of the adhesive bond between restorative dental materials and tooth structure, i.e. enamel and dentine. It includes a tensile bond strength measurement test, a test for measurement of marginal gaps around fillings, a microleakage test, and gives guidance on clinical usage tests for such materials. Some Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11619:2014 - **Identifier:** ISO/TS 11619:2014 _(verified: appears in the quote below)_ - **Item title:** Polyurethane tubing for use primarily in pneumatic installations — Dimensions and specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11619:2024 - **Withdrawn / published date:** 2014-02-11 _(verified: appears in the quote below)_ > 65366,TS,,ISO/TS 11619:2014,Polyurethane tubing for use primarily in pneumatic installations — Dimensions and specification,Tubes en polyuréthanne utilisés principalement dans les installations pneumatiques — Dimensions et spécifications,2014-02-11,1,['23.040.20'],ISO/TC 131/SC 4,9599,,[82509],['en'],7,"
ISO/TS 11619:2014 specifies the requirements for flexible thermoplastic polyurethane tubing conveying compressed air, for use in the ambient temperature range from 23 °C to 60 °C, in sizes from 3 mm to 12 mm outside diameter. Working pressure depends on the tube size and the service temperature. Tubing may be used with push on connectors which are specified in ISO 14743.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11665-13:2017 - **Identifier:** ISO/TS 11665-13:2017 _(verified: appears in the quote below)_ - **Item title:** Measurement of radioactivity in the environment — Air: radon 222 — Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11665-13:2025 - **Withdrawn / published date:** 2017-10-13 _(verified: appears in the quote below)_ > 70843,TS,,ISO/TS 11665-13:2017,Measurement of radioactivity in the environment — Air: radon 222 — Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method,Mesurage de la radioactivité dans l'environnement — Air : radon 222 — Partie 13: Détermination du coefficient de diffusion des matériaux imperméables : méthode de mesurage de l'activité volumique des deux côtés de la membrane,2017-10-13,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,[59139],[90838],['en'],37,"ISO/TS 11665-13:2017 specifies the different methods intended for assessing the radon diffusion coefficient in waterproofing materials such as bitumen or pol Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11669:2012 - **Identifier:** ISO/TS 11669:2012 _(verified: appears in the quote below)_ - **Item title:** Translation projects — General guidance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11669:2024 - **Withdrawn / published date:** 2012-05-16 _(verified: appears in the quote below)_ > 50687,TS,,ISO/TS 11669:2012,Translation projects — General guidance,Projets de traduction — Lignes directrices générales,2012-05-16,1,['01.020'],ISO/TC 37/SC 5,9599,,[79089],"['en','fr','ru']",35,"
This Technical Specification provides general guidance for all phases of a translation project. Its main purpose
is to facilitate communication among the parties involved in a project. It is intended for use by all stakeholders
of the translation project, including those who request translation services, those who provide the services and
those who make use of the results of the project — in particular, the translation product. It applies to multiple
sectors, including th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11686:2017 - **Identifier:** ISO/TS 11686:2017 _(verified: appears in the quote below)_ - **Item title:** Connectors for fluid power and general use — Assembly instructions for connectors with adjustable stud ends and O-ring sealing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11686:2023 - **Withdrawn / published date:** 2017-10-27 _(verified: appears in the quote below)_ > 66734,TS,,ISO/TS 11686:2017,Connectors for fluid power and general use — Assembly instructions for connectors with adjustable stud ends and O-ring sealing,Raccordements pour applications générales et transmissions hydrauliques — Instructions d’assemblage pour des connecteurs avec des éléments mâles ajustables et joint torique,2017-10-27,1,['23.100.40'],ISO/TC 131/SC 4,9599,,[84461],['en'],11,
ISO/TS 11686:2017 provides common installation instructions for all connectors that have adjustable stud ends and O-ring sealing. Conformance with the requirements of this document will result in a considerable reduction of leaks in hydraulic systems.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11819-3:2017 - **Identifier:** ISO/TS 11819-3:2017 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11819-3:2021 - **Withdrawn / published date:** 2017-04-03 _(verified: appears in the quote below)_ > 70808,TS,,ISO/TS 11819-3:2017,Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres,Acoustique — Méthode de mesurage de l'influence des revêtements de chaussées sur le bruit émis par la circulation — Partie 3: Pneumatiques de référence,2017-04-03,1,['17.140.30'],ISO/TC 43/SC 1,9599,,[82067],"['en','fr']",18,"ISO/TS 11819-3:2017 specifies two tyres intended to serve as reference tyres when using the close-proximity (CPX) method specified in ISO 11819-2.
The CPX method is a method for evaluating different road surfaces with respect to their influence on traffic noise, under conditions when tyre/road noise dominates. This method ideally re Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 11888:2011 - **Identifier:** ISO/TS 11888:2011 _(verified: appears in the quote below)_ - **Item title:** Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11888:2017 - **Withdrawn / published date:** 2011-11-08 _(verified: appears in the quote below)_ > 50969,TS,,ISO/TS 11888:2011,Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors,Nanotechnologies — Caractérisation des nanotubes en carbone multicouches — Facteurs de forme mésoscopique,2011-11-08,1,['07.120'],ISO/TC 229,9599,,[69549],"['en','fr']",17,"
ISO/TS 11888:2011 describes methods for the characterization of mesoscopic shape factors of multiwall carbon nanotubes (MWCNTs). Techniques employed include scanning electron microscopy, transmission electron microscopy, viscometry, and light scattering analysis.
ISO/TS 11888:2011 also includes additional terms needed to define the characterization of scattered bending persistence length (SBPL) Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12025:2012 - **Identifier:** ISO/TS 12025:2012 _(verified: appears in the quote below)_ - **Item title:** Nanomaterials — Quantification of nano-object release from powders by generation of aerosols _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 12025:2021 - **Withdrawn / published date:** 2012-10-29 _(verified: appears in the quote below)_ > 62368,TS,,ISO/TS 12025:2012,Nanomaterials — Quantification of nano-object release from powders by generation of aerosols,Nanomatériaux — Quantification de la libération de nano-objets par les poudres par production d'aérosols,2012-10-29,1,['07.120'],ISO/TC 229,9599,,[73131],"['en','fr']",32,"
ISO/TS 12025:2012 provides methodology for the quantification of nano-object release from powders as a result of treatment, ranging from handling to high energy dispersion, by measuring aerosols liberated after a defined aerosolization procedure. In addition to information in terms of mass, the aerosol is characterized for particle concentrations and size distributions.
ISO/TS 12025:2012 provid Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12029:2002 - **Identifier:** ISO/TS 12029:2002 _(verified: appears in the quote below)_ - **Item title:** Electronic imaging — Forms design optimization for electronic image management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 12029:2007 - **Withdrawn / published date:** 2002-04-04 _(verified: appears in the quote below)_ > 31714,TS,,ISO/TS 12029:2002,Electronic imaging — Forms design optimization for electronic image management,Imagerie électronique — Optimisation de conception de formulaires pour la gestion d'images électronique,2002-04-04,1,['37.080'],ISO/TC 171/SC 2,9599,,[39563],['en'],12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12029:2007 - **Identifier:** ISO/TS 12029:2007 _(verified: appears in the quote below)_ - **Item title:** Electronic imaging — Forms design optimization for electronic image management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12029:2010 - **Withdrawn / published date:** 2007-03-06 _(verified: appears in the quote below)_ > 39563,TS,,ISO/TS 12029:2007,Electronic imaging — Forms design optimization for electronic image management,Imagerie électronique — Optimisation de conception de formulaires pour la gestion d'images électroniques,2007-03-06,2,['37.080'],ISO/TC 171/SC 2,9599,[31714],[50434],['en'],16,
ISO/TS 12029:2007 provides guidelines for the design of forms to be completed by users and scanned for processing by electronic image management (EIM) systems. These guidelines are limited to forms using roman characters.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12033:2001 - **Identifier:** ISO/TS 12033:2001 _(verified: appears in the quote below)_ - **Item title:** Electronic imaging — Guidance for selection of document image compression methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 12033:2009 - **Withdrawn / published date:** 2001-11-22 _(verified: appears in the quote below)_ > 31716,TS,,ISO/TS 12033:2001,Electronic imaging — Guidance for selection of document image compression methods,Imagerie électronique — Guide pour la sélection des méthodes de compression d'image,2001-11-22,1,['37.080'],ISO/TC 171/SC 2,9599,,[42170],['en'],12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12103-3:2020 - **Identifier:** ISO/TS 12103-3:2020 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Test contaminants for filter evaluation — Part 3: Soot contaminant _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 12103-3:2023 - **Withdrawn / published date:** 2020-06-17 _(verified: appears in the quote below)_ > 79093,TS,,ISO/TS 12103-3:2020,Road vehicles — Test contaminants for filter evaluation — Part 3: Soot contaminant,Véhicules routiers — Poussière pour l'essai des filtres — Partie 3: Poussière de suie,2020-06-17,1,"['43.060.40','43.060.20']",ISO/TC 22/SC 34,9599,,[82279],['en'],16,This document defines particle size distribution by number and chemical content limits involving one grade of test aerosol made from combustion soot.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12180-1:2003 - **Identifier:** ISO/TS 12180-1:2003 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12180-1:2011 - **Withdrawn / published date:** 2003-12-05 _(verified: appears in the quote below)_ > 38353,TS,,ISO/TS 12180-1:2003,Geometrical Product Specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form,Spécification géométrique des produits (GPS) — Cylindricité — Partie 1: Vocabulaire et paramètres de cylindricité,2003-12-05,1,"['17.040.20','01.040.17']",ISO/TC 213,9599,,[53611],"['en','fr']",18,ISO/TS 12180-1:2003 defines the terms and concepts related to cylindricity of individual complete integral features only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12180-2:2003 - **Identifier:** ISO/TS 12180-2:2003 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12180-2:2011 - **Withdrawn / published date:** 2003-12-05 _(verified: appears in the quote below)_ > 38354,TS,,ISO/TS 12180-2:2003,Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators,Spécification géométrique des produits (GPS) — Cylindricité — Partie 2: Opérateurs de spécification,2003-12-05,1,['17.040.20'],ISO/TC 213,9599,,[53612],"['en','fr']",12,"ISO/TS 12180-2:2003 specifies the complete specification operator for cylindricity of complete integral features only, i.e. geometrical characteristics of features of type cylinder.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12180-2:2003/Cor 1:2010 - **Identifier:** ISO/TS 12180-2:2003/Cor 1:2010 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12180-2:2011 - **Withdrawn / published date:** 2010-04-27 _(verified: appears in the quote below)_ > 56221,TS,Cor,ISO/TS 12180-2:2003/Cor 1:2010,Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — Cylindricité — Partie 2: Opérateurs de spécification — Rectificatif technique 1,2010-04-27,1,['17.040.20'],ISO/TC 213,9599,,[53612],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12181-1:2003 - **Identifier:** ISO/TS 12181-1:2003 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12181-1:2011 - **Withdrawn / published date:** 2003-12-05 _(verified: appears in the quote below)_ > 38355,TS,,ISO/TS 12181-1:2003,Geometrical Product Specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness,Spécification géométrique des produits (GPS) — Circularité — Partie 1: Vocabulaire et paramètres de circularité,2003-12-05,1,"['17.040.20','01.040.17']",ISO/TC 213,9599,[12606],[53620],"['en','fr']",12,ISO/TS 12181-1:2003 defines the terms and concepts related to the roundness of individual integral features and covers complete roundness profiles only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12181-2:2003 - **Identifier:** ISO/TS 12181-2:2003 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12181-2:2011 - **Withdrawn / published date:** 2003-12-05 _(verified: appears in the quote below)_ > 38356,TS,,ISO/TS 12181-2:2003,Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators,Spécification géométrique des produits (GPS) — Circularité — Partie 2: Opérateurs de spécification,2003-12-05,1,['17.040.20'],ISO/TC 213,9599,,[53621],"['en','fr']",10,"ISO/TS 12181-2:2003 specifies the complete specification operator for roundness of integral features only and covers complete roundness profiles only, i.e. geometrical characteristics of features of the type circle.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12181-2:2003/Cor 1:2010 - **Identifier:** ISO/TS 12181-2:2003/Cor 1:2010 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12181-2:2011 - **Withdrawn / published date:** 2010-04-27 _(verified: appears in the quote below)_ > 56222,TS,Cor,ISO/TS 12181-2:2003/Cor 1:2010,Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — Circularité — Partie 2: Opérateurs de spécification — Rectificatif technique 1,2010-04-27,1,['17.040.20'],ISO/TC 213,9599,,[53621],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12208:2011 - **Identifier:** ISO/TS 12208:2011 _(verified: appears in the quote below)_ - **Item title:** Space systems — Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluences _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12208:2015 - **Withdrawn / published date:** 2011-09-21 _(verified: appears in the quote below)_ > 51278,TS,,ISO/TS 12208:2011,Space systems — Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluences,Systèmes spatiaux — Environnement spatial (naturel et artificiel) — Fluences de protons observées sur une longue durée au GEO et ligne directrice pour la sélection du niveau de confiance dans le modèle statistique des fluences de protons solaires,2011-09-21,1,['49.140'],ISO/TC 20/SC 14,9599,,[68152],['en'],10,"ISO/TS 12208:2011 describes a method to estimate energetic proton fluences in geosynchronous earth orbit (GEO) over a long duration (beyond the 11-year Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12417:2011 - **Identifier:** ISO/TS 12417:2011 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12417-1:2015 - **Withdrawn / published date:** 2011-05-23 _(verified: appears in the quote below)_ > 51419,TS,,ISO/TS 12417:2011,Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products,Implants cardiovasculaires et systèmes extracorporels — Produits de combinaison médicament-dispositif vasculaire,2011-05-23,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[57697],"['en','fr','ru']",48,"
ISO/TS 12417:2011 specifies requirements for vascular device-drug combination products (VDDCPs) based upon current technical and medical knowledge. VDDCPs are medical devices with various clinical indications for use in the human vascular blood system. A VDDCP incorporates, as an integral part, substance(s) which, if used separately, can be considered to be a medicinal product ( Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12720:2014 - **Identifier:** ISO/TS 12720:2014 _(verified: appears in the quote below)_ - **Item title:** Sustainability in buildings and civil engineering works — Guidelines on the application of the general principles in ISO 15392 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 12720:2024 - **Withdrawn / published date:** 2014-03-17 _(verified: appears in the quote below)_ > 51654,TS,,ISO/TS 12720:2014,Sustainability in buildings and civil engineering works — Guidelines on the application of the general principles in ISO 15392,Développement durable dans les bâtiments et les ouvrages de génie civil — Lignes directrices pour l'application des principes généraux de développement durable,2014-03-17,1,['91.040.01'],ISO/TC 59/SC 17,9599,,[83265],"['en','fr']",54,"
ISO/TS 12720:2014 provides guidance for the application of the general principles of sustainability in buildings and civil engineering works elaborated in ISO 15392. It shows the different actors involved with the construction works how to take these principles into account in their decision-making process Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12747:2011 - **Identifier:** ISO/TS 12747:2011 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Pipeline transportation systems — Recommended practice for pipeline life extension _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP TS 12747 | ISO 12747:2025 - **Withdrawn / published date:** 2011-04-07 _(verified: appears in the quote below)_ > 51657,TS,,ISO/TS 12747:2011,Petroleum and natural gas industries — Pipeline transportation systems — Recommended practice for pipeline life extension,Industries du pétrole et du gaz naturel — Systèmes de transport par conduites — Pratique recommandée pour l'extension de la durée de vie des conduites,2011-04-07,1,['75.200'],ISO/TC 67/SC 2,9599,,"[78292,84994]",['en'],22,"
ISO/TS 12747:2011 gives guidance to follow, as a minimum, in order to assess the feasibility of extending the service life of a pipeline system, as defined in ISO 13623, beyond its specified design life. ISO/TS 12747:2011 applies to rigid metallic pipelines.
Pump stations, compressor stations, pressure-reduction sta Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12780-1:2003 - **Identifier:** ISO/TS 12780-1:2003 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12780-1:2011 - **Withdrawn / published date:** 2003-12-04 _(verified: appears in the quote below)_ > 38729,TS,,ISO/TS 12780-1:2003,Geometrical Product Specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness,Spécification géométrique des produits (GPS) — Rectitude — Partie 1: Vocabulaire et paramètres de rectitude,2003-12-04,1,['17.040.01'],ISO/TC 213,9599,,[53622],"['en','fr']",11,
ISO/TS 12780-1:2003 defines the terms and concepts related to straightness of individual integral features and covers complete straightness profiles only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12780-2:2003 - **Identifier:** ISO/TS 12780-2:2003 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Straightness — Part 2: Specification operators _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12780-2:2011 - **Withdrawn / published date:** 2003-12-04 _(verified: appears in the quote below)_ > 38730,TS,,ISO/TS 12780-2:2003,Geometrical Product Specifications (GPS) — Straightness — Part 2: Specification operators,Spécification géométrique des produits (GPS) — Rectitude — Partie 2: Opérateurs de spécification,2003-12-04,1,['17.040.01'],ISO/TC 213,9599,,[53623],"['en','fr']",8,"ISO/TS 12780-2:2003 specifies the complete specification operator for straightness of integral features only and covers complete straightness profiles only, i.e. geometrical characteristics of features of type line.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12780-2:2003/Cor 1:2010 - **Identifier:** ISO/TS 12780-2:2003/Cor 1:2010 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Straightness — Part 2: Specification operators — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12780-2:2011 - **Withdrawn / published date:** 2010-04-27 _(verified: appears in the quote below)_ > 56223,TS,Cor,ISO/TS 12780-2:2003/Cor 1:2010,Geometrical Product Specifications (GPS) — Straightness — Part 2: Specification operators — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — Rectitude — Partie 2: Opérateurs de spécification — Rectificatif technique 1,2010-04-27,1,['17.040.01'],ISO/TC 213,9599,,[53623],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12781-1:2003 - **Identifier:** ISO/TS 12781-1:2003 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Flatness — Part 1: Vocabulary and parameters of flatness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12781-1:2011 - **Withdrawn / published date:** 2003-12-05 _(verified: appears in the quote below)_ > 38731,TS,,ISO/TS 12781-1:2003,Geometrical Product Specifications (GPS) — Flatness — Part 1: Vocabulary and parameters of flatness,Spécification géométrique des produits (GPS) — Planéité — Partie 1: Vocabulaire et paramètres de planéité,2003-12-05,1,"['01.040.17','17.040.01']",ISO/TC 213,9599,,[53624],"['en','fr']",12,ISO/TS 12781-1:2003 defines the terms and concepts related to flatness of individual complete integral features only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12781-2:2003 - **Identifier:** ISO/TS 12781-2:2003 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Flatness — Part 2: Specification operators _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12781-2:2011 - **Withdrawn / published date:** 2003-12-05 _(verified: appears in the quote below)_ > 38732,TS,,ISO/TS 12781-2:2003,Geometrical Product Specifications (GPS) — Flatness — Part 2: Specification operators,Spécification géométrique des produits (GPS) — Planéité — Partie 2: Opérateurs de spécification,2003-12-05,1,"['01.040.17','17.040.01']",ISO/TC 213,9599,,[53625],"['en','fr']",13,"ISO/TS 12781-2:2003 specifies the complete specification operator for flatness of complete integral features only, i.e. geometrical characteristics of individual features of type plane.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12781-2:2003/Cor 1:2010 - **Identifier:** ISO/TS 12781-2:2003/Cor 1:2010 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Flatness — Part 2: Specification operators — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12781-2:2011 - **Withdrawn / published date:** 2010-04-27 _(verified: appears in the quote below)_ > 56227,TS,Cor,ISO/TS 12781-2:2003/Cor 1:2010,Geometrical Product Specifications (GPS) — Flatness — Part 2: Specification operators — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — Planéité — Partie 2: Opérateurs de spécification — Rectificatif technique 1,2010-04-27,1,"['01.040.17','17.040.01']",ISO/TC 213,9599,,[53625],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12813:2009 - **Identifier:** ISO/TS 12813:2009 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Compliance check communication for autonomous systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12813:2015 - **Withdrawn / published date:** 2009-11-04 _(verified: appears in the quote below)_ > 51803,TS,,ISO/TS 12813:2009,Electronic fee collection — Compliance check communication for autonomous systems,Perception du télépéage — Communication de contrôle de conformité pour systèmes autonomes,2009-11-04,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64165],['en'],44,"ISO/TS 12813:2009 defines requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee-collecting (EFC) systems. Compliance checking communication (CCC) takes place between a road vehicle's on-board equipment (OBE) and an outside interrogator (road-side mounted equipment, mobile device or hand‑held unit), and serves to establish whether the data that are delivered by Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12828-3:2020 - **Identifier:** ISO/TS 12828-3:2020 _(verified: appears in the quote below)_ - **Item title:** Validation method for fire gas analysis — Part 3: Considerations related to interlaboratory trials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 12828-3:2024 - **Withdrawn / published date:** 2020-02-07 _(verified: appears in the quote below)_ > 75229,TS,,ISO/TS 12828-3:2020,Validation method for fire gas analysis — Part 3: Considerations related to interlaboratory trials,Méthode de validation des analyses de gaz d'incendie — Partie 3: Considérations relatives aux essais interlaboratoires,2020-02-07,1,['13.220.01'],ISO/TC 92/SC 3,9599,,[87368],"['en','fr']",11,"
This document describes tools and gives guidance concerning interlaboratory trials related to fire effluent analyses. It explains the relative contributions from the physical fire model and analytical techniques to evaluate trueness and fidelity. It also explains the difficulties involved with the interpretation of round-robin data and with the evaluation of trueness in fi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12869:2012 - **Identifier:** ISO/TS 12869:2012 _(verified: appears in the quote below)_ - **Item title:** Water quality — Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 12869:2019 - **Withdrawn / published date:** 2012-10-18 _(verified: appears in the quote below)_ > 52079,TS,,ISO/TS 12869:2012,Water quality — Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR),Qualité de l'eau — Détection et quantification de Legionella spp. et/ou Legionella pneumophila par concentration et amplification génique par réaction de polymérisation en chaîne quantitative (qPCR),2012-10-18,1,['07.100.20'],ISO/TC 147/SC 4,9599,,[70756],['en'],38,"
ISO/TS 12869:2012 specifies a method for the detection and quantification of Legionella spp. and L. pneumophila using a quantitative polymerase chain reaction (qPCR). It specifies general methodological r Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12901-1:2012 - **Identifier:** ISO/TS 12901-1:2012 _(verified: appears in the quote below)_ - **Item title:** Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 1: Principles and approaches _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 12901-1:2024 - **Withdrawn / published date:** 2012-11-13 _(verified: appears in the quote below)_ > 52125,TS,,ISO/TS 12901-1:2012,Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 1: Principles and approaches,Nanotechnologies — Gestion du risque professionnel appliquée aux nanomatériaux manufacturés — Partie 1: Principes et approches,2012-11-13,1,"['13.100','07.120']",ISO/TC 229,9599,,[80582],"['en','fr','ru']",37,"
ISO/TS 12901:2012 provides guidance on occupational health and safety measures relating to engineered nanomaterials, including the use of engineering controls and appropriate personal protective equipment, guidance on dealing with spills and accidental releases, and guidance on appropriate handling of these materials during disposal. 53375,TS,,ISO/TS 12901-2:2014,Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 2: Use of the control banding approach,Nanotechnologies — Gestion du risque professionnel appliquée aux nanomatériaux manufacturés — Partie 2: Utilisation de l'approche par bandes de dangers,2014-01-16,1,"['13.100','07.120']",ISO/TC 229,9599,,[82791],"['en','fr','ru']",31,"
ISO/TS 12901-2:2014 describes the use of a control banding approach for controlling the risks associated with occupational exposures to nano-objects, and their aggregates and agglomerates greater than 100 nm (NOAA), even if knowledge regarding their toxicity and quantitative exposure estimations is li Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12902:2001 - **Identifier:** ISO/TS 12902:2001 _(verified: appears in the quote below)_ - **Item title:** Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen — Instrumental methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 29541:2010 - **Withdrawn / published date:** 2001-12-13 _(verified: appears in the quote below)_ > 35302,TS,,ISO/TS 12902:2001,"Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen — Instrumental methods","Combustibles minéraux solides — Dosage du carbone, de l'hydrogène et de l'azote total — Méthodes instrumentales",2001-12-13,1,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,,[45546],['en'],6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12911:2012 - **Identifier:** ISO/TS 12911:2012 _(verified: appears in the quote below)_ - **Item title:** Framework for building information modelling (BIM) guidance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12911:2023 - **Withdrawn / published date:** 2012-08-31 _(verified: appears in the quote below)_ > 52155,TS,,ISO/TS 12911:2012,Framework for building information modelling (BIM) guidance,Cadre pour les directives de modélisation des données du bâtiment,2012-08-31,1,['91.010.01'],ISO/TC 59/SC 13,9599,,[79692],['en'],25,"
ISO/TS 12911:2012 establishes a framework for providing specifications for the commissioning of building information modelling (BIM).
It is applicable to any range of modelling of buildings and building-related facilities, from a portfolio of assets at a single site or multiple sites, to assets at a single small building and at any constituent system, subsystem, component or element. It is applicable to any asset type, including most infrastructure and public works Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 12913-3:2019 - **Identifier:** ISO/TS 12913-3:2019 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Soundscape — Part 3: Data analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 12913-3:2025 - **Withdrawn / published date:** 2019-12-10 _(verified: appears in the quote below)_ > 69864,TS,,ISO/TS 12913-3:2019,Acoustics — Soundscape — Part 3: Data analysis,Acoustique — Paysage sonore — Partie 3: Analyse de données,2019-12-10,1,['17.140.01'],ISO/TC 43/SC 1,9599,,[86955],['en'],22,
This document provides requirements and supporting information on analysis of data collected in-situ through methods as specified in ISO/TS 12913-2.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13004:2013 - **Identifier:** ISO/TS 13004:2013 _(verified: appears in the quote below)_ - **Item title:** Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13004:2022 - **Withdrawn / published date:** 2013-05-06 _(verified: appears in the quote below)_ > 52320,TS,,ISO/TS 13004:2013,Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD,Stérilisation des produits de santé — Irradiation — Justification de la dose de stérilisation choisie: méthode VDmaxSD,2013-05-06,1,['11.080.01'],ISO/TC 198,9599,,[82297],['en'],57,"ISO/TS 13004:2013 describes a method for substantiating a selected sterilization dose of 17,5, 20, 22,5, 27,5, 30, 32,5 or 35 kGy that achieves a sterility assurance level (SAL) of 10−6 or less for radiation sterilization of health care products. ISO/TS 13004:2013 also specifies a method of sterilization dose audit used to demonstrate the continued effectivene Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13131:2014 - **Identifier:** ISO/TS 13131:2014 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Telehealth services — Quality planning guidelines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13131:2021 - **Withdrawn / published date:** 2014-12-11 _(verified: appears in the quote below)_ > 53052,TS,,ISO/TS 13131:2014,Health informatics — Telehealth services — Quality planning guidelines,Informatique de santé — Services de télésanté — Lignes directrices pour la planification de la qualité,2014-12-11,1,['35.240.80'],ISO/TC 215,9599,,[75962],['en'],32,"
ISO/TS 13131:2014 provides advice and recommendations on how to develop quality objectives and guidelines for telehealth services that use information and communications technologies (ICTs) to deliver healthcare over both long and short distances by using a risk management process. The following key requirements are considered when developing quality objectives and guidelines for telehealth services:
ISO/TS 13140-1:2011 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of on board units (OBU) and roadside equipment (RSE) to ISO/TS 13141. It provides a basis for conformance tests for dedicated short range commu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13140-2:2012 - **Identifier:** ISO/TS 13140-2:2012 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 — Part 2: Abstract test suite _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13140-2:2016 - **Withdrawn / published date:** 2012-02-24 _(verified: appears in the quote below)_ > 53340,TS,,ISO/TS 13140-2:2012,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 — Part 2: Abstract test suite,Perception du télépéage — Évaluation des équipements embarqués et en bord de route quant à la conformité avec l'ISO/TS 13141 — Partie 2: Suite d'essai abstraite,2012-02-24,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[70048],['en'],15,
ISO/TS 13140-2:2011 specifies the abstract test suite (ATS) to evaluate the conformity of on-board equipment (OBE) and roadside equipment (RSE) to ISO/TS 13141:2010.
It provides a basis for conformance tests for dedicated short range communication (DSRC) equipment (on-board equipment and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13141:2010 - **Identifier:** ISO/TS 13141:2010 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Localisation augmentation communication for autonomous systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13141:2015 - **Withdrawn / published date:** 2010-02-11 _(verified: appears in the quote below)_ > 53342,TS,,ISO/TS 13141:2010,Electronic fee collection — Localisation augmentation communication for autonomous systems,Perception de télépéage — Communications d'augmentation de localisations pour systèmes autonomes,2010-02-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64166],['en'],35,"
ISO/TS 13141:2010 establishes requirements for short-range communication for the purposes of augmenting the localisation in autonomous electronic fee collection (EFC) systems. Localisation augmentation serves to inform OBE about geographical location and the identification of a charge object. ISO/TS 13141:2010 specifies the provision of location and heading information and security means to protect fr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13141:2010/Cor 1:2013 - **Identifier:** ISO/TS 13141:2010/Cor 1:2013 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Localisation augmentation communication for autonomous systems — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13141:2015 - **Withdrawn / published date:** 2013-03-19 _(verified: appears in the quote below)_ > 63683,TS,Cor,ISO/TS 13141:2010/Cor 1:2013,Electronic fee collection — Localisation augmentation communication for autonomous systems — Technical Corrigendum 1,Perception de télépéage — Communications d'augmentation de localisations pour systèmes autonomes — Rectificatif technique 1,2013-03-19,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64166],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13143-1:2011 - **Identifier:** ISO/TS 13143-1:2011 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 — Part 1: Test suite structure and test purposes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13143-1:2016 - **Withdrawn / published date:** 2011-04-11 _(verified: appears in the quote below)_ > 53338,TS,,ISO/TS 13143-1:2011,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 — Part 1: Test suite structure and test purposes,Perception du télépéage — Évaluation des équipements embarqués et en bord de route quant à la conformité avec l'ISO/TS 12813 — Partie 1: Structure de suite d'essais et buts des essais,2011-04-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[68246],['en'],68,
ISO/TS 13143-1:2011 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of on board units (OBU) and roadside equipment (RSE) to ISO/TS 12813. It provides a basis for conformance tests for dedicated short range comm Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13143-2:2011 - **Identifier:** ISO/TS 13143-2:2011 _(verified: appears in the quote below)_ - **Item title:** Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 — Part 2: Abstract test suite _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13143-2:2016 - **Withdrawn / published date:** 2011-05-05 _(verified: appears in the quote below)_ > 53339,TS,,ISO/TS 13143-2:2011,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 — Part 2: Abstract test suite,Perception du télépéage — Evaluation de conformité de l'équipement embarqué et de l'équipement au sol à l'ISO/TS 12813 — Partie 2: Suite d'essais abstraite,2011-05-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[68247],['en'],17,"
ISO/TS 13143-2:2011 specifies the abstract test suite (ATS) to evaluate the conformity of on-board equipment (OBE) and roadside equipment (RSE) to ISO/TS 12813.
It provides a basis for conformance tests for dedicated short range communication (DSRC) equipment (on-board units and roadside equi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13278:2011 - **Identifier:** ISO/TS 13278:2011 _(verified: appears in the quote below)_ - **Item title:** Nanotechnologies — Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13278:2017 - **Withdrawn / published date:** 2011-10-31 _(verified: appears in the quote below)_ > 53615,TS,,ISO/TS 13278:2011,Nanotechnologies — Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry,Nanotechnologies — Dosage des impuretés dans les nanotubes en carbone (CNTs) par spectroscopie de masse à plasma induit (ICP-MS),2011-10-31,1,['07.120'],ISO/TC 229,9599,,[69310],"['en','fr']",19, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13353:2002 - **Identifier:** ISO/TS 13353:2002 _(verified: appears in the quote below)_ - **Item title:** Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19438:2003 - **Withdrawn / published date:** 2002-08-29 _(verified: appears in the quote below)_ > 35892,TS,,ISO/TS 13353:2002,Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting,Filtres à carburant pour moteurs à combustion interne à essence ou diesel — Efficacité initiale par comptage des particules,2002-08-29,1,['43.060.40'],ISO/TC 22,9599,[21763],[33831],['en'],17,"
ISO/TR 13353:2002 gives a test procedure for evaluating the initial efficiency of an internal combustion engine fuel filter by submitting the filter to a constant flowrate of test liquid.
ISO/TR 13353:2002 is applicable to diesel and petrol filters having a rated flow of from 50 l/h to 250 l/h. By agreement between filter manufacturer and customer, the procedur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-100:2004 - **Identifier:** ISO/TS 13399-100:2004 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-100:2008 - **Withdrawn / published date:** 2004-09-07 _(verified: appears in the quote below)_ > 36759,TS,,ISO/TS 13399-100:2004,"Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries","Représentation et échange des données relatives aux outils coupants — Partie 100: Définitions, principes et méthodes pour les dictionnaires de référence",2004-09-07,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[46415],['en'],29,"
ISO/TS 13399-100:2004 defines the principles and methods for creating unambiguous definitions of the items and their properties that relate to cutting tools in computer-sensible dictionaries that are to be used for reference by the information model defined in ISO 13399-1.
The following are within the sc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-2:2005 - **Identifier:** ISO/TS 13399-2:2005 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-2:2014 - **Withdrawn / published date:** 2005-02-21 _(verified: appears in the quote below)_ > 36758,TS,,ISO/TS 13399-2:2005,Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items,Représentation et échange des données relatives aux outils coupants — Partie 2: Dictionnaire de référence pour les éléments coupants,2005-02-21,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54167],['en'],98,"
ISO/TS 13399-2:2005 specifies a reference dictionary for cutting items, together with their descriptive properties and domains of values, for use in cutting tool data representation. The reference dictionary contains definitions and identifications of the classes of cutting items and their features, together with an associated classification scheme, definit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-2:2005/Cor 1:2011 - **Identifier:** ISO/TS 13399-2:2005/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-2:2014 - **Withdrawn / published date:** 2011-03-10 _(verified: appears in the quote below)_ > 59312,TS,Cor,ISO/TS 13399-2:2005/Cor 1:2011,Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1,Représentation et échange des données relatives aux outils coupants — Partie 2: Dictionnaire de référence pour les éléments coupants — Rectificatif technique 1,2011-03-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54167],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-2:2014 - **Identifier:** ISO/TS 13399-2:2014 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-2:2021 - **Withdrawn / published date:** 2014-02-07 _(verified: appears in the quote below)_ > 54167,TS,,ISO/TS 13399-2:2014,Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items,Représentation et échange des données relatives aux outils coupants — Partie 2: Dictionnaire de référence pour les éléments coupants,2014-02-07,2,"['35.240.50','25.100.01']",ISO/TC 29,9599,"[36758,59312]",[81109],"['en','fr']",104,"
ISO/TS 13399-2:2014 specifies a reference dictionary for cutting items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of cutting items and their features, with an associated classification scheme, definitions and identifications of the data element types tha Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-3:2007 - **Identifier:** ISO/TS 13399-3:2007 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-3:2014 - **Withdrawn / published date:** 2007-01-10 _(verified: appears in the quote below)_ > 39096,TS,,ISO/TS 13399-3:2007,Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items,Représentation et échange des données relatives aux outils coupants — Partie 3: Dictionnaire de référence pour les éléments relatifs aux outils,2007-01-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54168],['en'],160,"
ISO 13399-3:2007 specifies a reference dictionary for tool items, together with their descriptive properties and domains of values. It specifies a reference dictionary that contains definitions and identifications of the classes of tool items and their features, with an associated classification scheme, definitions and identifications of the data eleme Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-3:2007/Cor 1:2011 - **Identifier:** ISO/TS 13399-3:2007/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-3:2014 - **Withdrawn / published date:** 2011-03-10 _(verified: appears in the quote below)_ > 59313,TS,Cor,ISO/TS 13399-3:2007/Cor 1:2011,Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1,Représentation et échange des données relatives aux outils coupants — Partie 3: Dictionnaire de référence pour les éléments relatifs aux outils — Rectificatif technique 1,2011-03-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54168],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-3:2014 - **Identifier:** ISO/TS 13399-3:2014 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-3:2021 - **Withdrawn / published date:** 2014-02-07 _(verified: appears in the quote below)_ > 54168,TS,,ISO/TS 13399-3:2014,Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items,Représentation et échange des données relatives aux outils coupants — Partie 3: Dictionnaire de référence pour les éléments relatifs aux outils,2014-02-07,2,"['35.240.50','25.100.01']",ISO/TC 29,9599,"[39096,59313]",[81127],"['en','fr']",140,"
ISO/TS 13399-3:2014 specifies a reference dictionary for tool items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of tool items and their features, with an associated classification scheme, definitions and identifications of the data element types that Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-4:2007 - **Identifier:** ISO/TS 13399-4:2007 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-4:2014 - **Withdrawn / published date:** 2007-01-10 _(verified: appears in the quote below)_ > 39097,TS,,ISO/TS 13399-4:2007,Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items,Représentation et échange des données relatives aux outils coupants — Partie 4: Dictionnaire de référence pour les éléments relatifs aux attachements,2007-01-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54169],['en'],60,"
ISO/TS 13399-4:2007 specifies a reference dictionary for adaptive items, together with their descriptive properties and domains of values. The reference dictionary contains definitions and identifications of the classes of adaptive items, with an associated classification scheme, definitions and identifications of the data element types that r Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-4:2007/Cor 1:2011 - **Identifier:** ISO/TS 13399-4:2007/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-4:2014 - **Withdrawn / published date:** 2011-03-10 _(verified: appears in the quote below)_ > 59314,TS,Cor,ISO/TS 13399-4:2007/Cor 1:2011,Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1,Représentation et échange des données relatives aux outils coupants — Partie 4: Dictionnaire de référence pour les éléments relatifs aux attachements — Rectificatif technique 1,2011-03-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54169],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-4:2014 - **Identifier:** ISO/TS 13399-4:2014 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-4:2021 - **Withdrawn / published date:** 2014-02-07 _(verified: appears in the quote below)_ > 54169,TS,,ISO/TS 13399-4:2014,Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items,Représentation et échange des données relatives aux outils coupants — Partie 4: Dictionnaire de référence pour les éléments relatifs aux attachements,2014-02-07,2,"['35.240.50','25.100.01']",ISO/TC 29,9599,"[59314,39097]",[81315],"['en','fr']",56,"
ISO/TS 13399-4:2014 specifies a reference dictionary for adaptive items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of adaptive items, with an associated classification scheme, definitions and identifications of the data element types that re Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-5:2007 - **Identifier:** ISO/TS 13399-5:2007 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-5:2014 - **Withdrawn / published date:** 2007-02-14 _(verified: appears in the quote below)_ > 43895,TS,,ISO/TS 13399-5:2007,Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items,Représentation et échange des données relatives aux outils coupants — Partie 5: Dictionnaire de référence de termes pour les éléments d'assemblage,2007-02-14,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54170],['en'],54,"
ISO/TS 13399-5:2007 specifies a reference dictionary for assembly items for cutting tools, together with their descriptive properties and domains of values. It specifies a reference dictionary that contains definitions and identifications of the classes of assembly items, with an associated classification scheme, definitions and identifications o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-5:2007/Cor 1:2011 - **Identifier:** ISO/TS 13399-5:2007/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-5:2014 - **Withdrawn / published date:** 2011-03-01 _(verified: appears in the quote below)_ > 59318,TS,Cor,ISO/TS 13399-5:2007/Cor 1:2011,Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1,Représentation et échange des données relatives aux outils coupants — Partie 5: Dictionnaire de référence de termes pour les éléments d'assemblage — Rectificatif technique 1,2011-03-01,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54170],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-50:2007 - **Identifier:** ISO/TS 13399-50:2007 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-50:2013 - **Withdrawn / published date:** 2007-01-10 _(verified: appears in the quote below)_ > 42358,TS,,ISO/TS 13399-50:2007,Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts,Représentation et échange des données relatives aux outils coupants — Partie 50: Dictionnaire de référence pour les systèmes de coordonnées et les concepts communs,2007-01-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54171],['en'],89,"
ISO/TS 13399-50:2007 specifies a reference dictionary for reference systems and common concepts for cutting tools, together with their descriptive properties and domains of values. The reference dictionary contains definitions and identifications of the classes of reference systems and common concepts for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-50:2007/Cor 1:2011 - **Identifier:** ISO/TS 13399-50:2007/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-50:2013 - **Withdrawn / published date:** 2011-03-10 _(verified: appears in the quote below)_ > 59317,TS,Cor,ISO/TS 13399-50:2007/Cor 1:2011,Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1,Représentation et échange des données relatives aux outils coupants — Partie 50: Dictionnaire de référence pour les systèmes de coordonnées et les concepts communs — Rectificatif technique 1,2011-03-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54171],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-60:2007 - **Identifier:** ISO/TS 13399-60:2007 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-60:2014 - **Withdrawn / published date:** 2007-01-10 _(verified: appears in the quote below)_ > 42359,TS,,ISO/TS 13399-60:2007,Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems,Représentation et échange des données relatives aux outils coupants — Partie 60: Dictionnaire de référence pour les systèmes de connexion,2007-01-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54172],['en'],122,"
ISO/TS 13399-60:2007 specifies a reference dictionary for connection systems for cutting tools, together with their descriptive properties and domains of values. The reference dictionary contains definitions and identifications of the classes of connection systems for cutting tools, with an associated classification scheme, definitions and identifi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-60:2007/Cor 1:2011 - **Identifier:** ISO/TS 13399-60:2007/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-60:2014 - **Withdrawn / published date:** 2011-03-10 _(verified: appears in the quote below)_ > 59315,TS,Cor,ISO/TS 13399-60:2007/Cor 1:2011,Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1,Représentation et échange des données relatives aux outils coupants — Partie 60: Dictionnaire de référence pour les systèmes de connexion — Rectificatif technique 1,2011-03-10,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[54172],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13399-80:2014 - **Identifier:** ISO/TS 13399-80:2014 _(verified: appears in the quote below)_ - **Item title:** Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13399-80:2017 - **Withdrawn / published date:** 2014-07-17 _(verified: appears in the quote below)_ > 59670,TS,,ISO/TS 13399-80:2014,Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles,Représentation et échange des données relatives aux outils coupants — Partie 80: Création·et·échange·de·modèles·3D — Vue d'ensemble et principes,2014-07-17,1,"['35.240.50','25.100.01']",ISO/TC 29,9599,,[68886],['en'],10,"
ISO 13399-80:2014 specifies the basic principles for the creation and exchange of simplified 3D models of cutting items, tool items, and adaptive items, using related properties and domains of values. Simplified 3D models contain the following: naming and defining of the basic design features of cutting items, tool items, and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13434:2008 - **Identifier:** ISO/TS 13434:2008 _(verified: appears in the quote below)_ - **Item title:** Geosynthetics — Guidelines for the assessment of durability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP TS 13434 | ISO/TS 13434:2020 - **Withdrawn / published date:** 2008-10-31 _(verified: appears in the quote below)_ > 42713,TS,,ISO/TS 13434:2008,Geosynthetics — Guidelines for the assessment of durability,Géosynthétiques — Lignes directrices concernant la durabilité,2008-10-31,1,['59.080.70'],ISO/TC 221,9599,[25120],"[63347,71032]","['en','fr']",42,"
ISO/TS 13434:2008 provides guidelines for the assessment of the durability of geosynthetics, the object of which is to provide the design engineer with the necessary information, generally defined as changes in material properties or as partial safety factors, to ensure that the expected design life of a geosynthetic can be achieved with confidence.
ISO/TS 13434:2008 is not applicable to products designed to survive for only a limited time, such as ero Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13473-4:2008 - **Identifier:** ISO/TS 13473-4:2008 _(verified: appears in the quote below)_ - **Item title:** Characterization of pavement texture by use of surface profiles — Part 4: Spectral analysis of surface profiles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP TS 13473-4 | ISO 13473-4:2024 - **Withdrawn / published date:** 2008-04-22 _(verified: appears in the quote below)_ > 40279,TS,,ISO/TS 13473-4:2008,Characterization of pavement texture by use of surface profiles — Part 4: Spectral analysis of surface profiles,Caractérisation de la texture d'un revêtement de chaussée à partir de relevés de profils de la surface — Partie 4: Analyse spectrale des profils de la surface,2008-04-22,1,"['17.140.30','93.080.20']",ISO/TC 43/SC 1,9599,,"[63715,81318]",['en'],35,"
ISO/TS 13473-4:2008 describes the methods that are available to perform a spectral analysis of pavement surface profile signals. It specifies three possible methods for spatial frequency analysis (or texture wavelength analysis) of two-dimensional surface profiles that describe the pavement roughness ampli Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13474:2003 - **Identifier:** ISO/TS 13474:2003 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Impulse sound propagation for environmental noise assessment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13474:2009 - **Withdrawn / published date:** 2003-01-20 _(verified: appears in the quote below)_ > 33124,TS,,ISO/TS 13474:2003,Acoustics — Impulse sound propagation for environmental noise assessment,Acoustique — Propagation des sons impulsionnels et évaluation du bruit environnemental,2003-01-20,1,['17.140.01'],ISO/TC 43/SC 1,9599,,[39513],"['en','fr']",16,"
TS 13474:2002 specifies engineering methods to calculate the average sound immission for a distribution of impulse sound events for the purposes of environmental noise assessment. It is applicable to impulse sounds propagating long distances (e.g. 0,5 km to 30 km) from sources such as mining blasting, artillery firing and bomb explosions using conventional explosives of moderate size (e.g. 0,05 kg to 1 000 kg of TNT equivalent mass Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13499:2003 - **Identifier:** ISO/TS 13499:2003 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multimedia data exchange format for impact tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13499:2014 - **Withdrawn / published date:** 2003-02-06 _(verified: appears in the quote below)_ > 35966,TS,,ISO/TS 13499:2003,Road vehicles — Multimedia data exchange format for impact tests,Véhicules routiers — Format d'échange de données multimédia pour les essais de choc,2003-02-06,1,['43.020'],ISO/TC 22,9599,[22129],[64016],['en'],12,
ISO TS 13499:2002 presents a simple means for the exchange of multimedia data on impact tests between different laboratories. A format has been developed which defines a directory structure and the exchange information as ASCII files. Related electronic documents are available on the ISO website.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13499:2014 - **Identifier:** ISO/TS 13499:2014 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multimedia data exchange format for impact tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13499:2019 - **Withdrawn / published date:** 2014-02-12 _(verified: appears in the quote below)_ > 64016,TS,,ISO/TS 13499:2014,Road vehicles — Multimedia data exchange format for impact tests,Véhicules routiers — Format d'échange de données multimédia pour les essais de choc,2014-02-12,2,['43.020'],ISO/TC 22/SC 36,9599,[35966],[75156],['en'],8,ISO/TS 13499:2014 presents a simple means for the exchange of multimedia data on impact tests between different laboratories. A format has been developed which defines a directory structure and the exchange information as ASCII files. Related electronic documents are available on the ISO website.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13571:2002 - **Identifier:** ISO/TS 13571:2002 _(verified: appears in the quote below)_ - **Item title:** Life-threatening components of fire — Guidelines for the estimation of time available for escape using fire data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13571:2007 - **Withdrawn / published date:** 2002-08-15 _(verified: appears in the quote below)_ > 37003,TS,,ISO/TS 13571:2002,Life-threatening components of fire — Guidelines for the estimation of time available for escape using fire data,"Composants dangereux du feu — Lignes directrices pour l'estimation du temps disponible pour l'évacuation, utilisant les caractéristiques du feu",2002-08-15,1,['13.220.01'],ISO/TC 92/SC 3,9599,,[42967],"['en','fr']",21,"ISO/TS 13571:2002 is only one of many tools available for use in fire safety engineering. It is intended to be used in conjunction with models for analysis of the initiation and development of fire, fire spread, smoke formation and movement, chemical species generation, transport and decay and people movement, as well as fire detectio Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13582:2013 - **Identifier:** ISO/TS 13582:2013 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Sharing of OID registry information _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13582:2015 - **Withdrawn / published date:** 2013-03-14 _(verified: appears in the quote below)_ > 54037,TS,,ISO/TS 13582:2013,Health informatics — Sharing of OID registry information,Informatique de santé — Partage des informations de registre des identifiants d'objets (OID),2013-03-14,1,['35.240.80'],ISO/TC 215,9599,,[69652],['en'],28,"
ISO/TS 13582:2013 specifies the mandatory and optional information to be recorded in any registry of OIDs, using an information model.
It specifies which parts of that information are to be regarded as public, and which parts are to be subject to security and privacy requirements.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13605:2012 - **Identifier:** ISO/TS 13605:2012 _(verified: appears in the quote below)_ - **Item title:** Solid mineral fuels — Major and minor elements in hard coal ash and coke ash — Wavelength dispersive X-ray fluorescence spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13605:2018 - **Withdrawn / published date:** 2012-05-11 _(verified: appears in the quote below)_ > 54059,TS,,ISO/TS 13605:2012,Solid mineral fuels — Major and minor elements in hard coal ash and coke ash — Wavelength dispersive X-ray fluorescence spectrometric method,Combustibles minéraux solides — Éléments en minorité et en majorité dans les cendres de houille et de coke — Méthode spectrométrique par fluorescence aux rayons X à une longueur d'onde dispersive,2012-05-11,1,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,,[71597],['en'],15,"ISO/TS 13605:2012 sets out a wavelength dispersive X-ray fluorescence procedure for the determination of silicon, aluminium, iron, calcium, magnesium, sodium, potassium, titanium, manganese, phosphorus and sulfur.
The method is applicable to coal a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13606-4:2009 - **Identifier:** ISO/TS 13606-4:2009 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Electronic health record communication — Part 4: Security _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13606-4:2019 - **Withdrawn / published date:** 2009-09-16 _(verified: appears in the quote below)_ > 50121,TS,,ISO/TS 13606-4:2009,Health informatics — Electronic health record communication — Part 4: Security,Informatique de santé — Communication du dossier de santé informatisé — Partie 4: Sécurité,2009-09-16,1,['35.240.80'],ISO/TC 215,9599,,[62306],['en'],30,
ISO/TS 13606-4:2009 describes a methodology for specifying the privileges necessary to access EHR data. This methodology forms part of the overall EHR communications architecture defined in ISO 13606‑1.
ISO/TS 13606-4:2009 seeks to address those requirements uniquely pertaining to EHR communications and to represent and communicate EHR-specific information that will inform an access decision. It also refers to general securit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13725:2001 - **Identifier:** ISO/TS 13725:2001 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Cylinders — Method for determining the buckling load _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP TS 13725 | ISO/TS 13725:2016 - **Withdrawn / published date:** 2001-08-30 _(verified: appears in the quote below)_ > 33432,TS,,ISO/TS 13725:2001,Hydraulic fluid power — Cylinders — Method for determining the buckling load,Transmissions hydrauliques — Vérins — Méthode de détermination du flambage,2001-08-30,1,['23.100.20'],ISO/TC 131/SC 3,9599,,"[51505,62328]","['en','fr']",39, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13725:2016 - **Identifier:** ISO/TS 13725:2016 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Method for evaluating the buckling load of a hydraulic cylinder _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 13725:2021 - **Withdrawn / published date:** 2016-06-08 _(verified: appears in the quote below)_ > 62328,TS,,ISO/TS 13725:2016,Hydraulic fluid power — Method for evaluating the buckling load of a hydraulic cylinder,Transmissions hydrauliques — Méthode d'évaluation de la charge de flambage d'un vérin hydraulique,2016-06-08,2,['23.100.20'],ISO/TC 131/SC 3,9599,[33432],[81163],"['en','fr']",19,"
ISO/TS 13725:2016 specifies a method for the evaluation of the buckling load which
a) takes into account a geometric model of the hydraulic cylinder, meaning it does not treat the hydraulic cylinder as an equivalent column,
b) can be used for all types of cylinder mounting and rod end connection specified in Table 2,
c) includes a factor of safety, k, to be set by the per Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 13972:2015 - **Identifier:** ISO/TS 13972:2015 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Detailed clinical models, characteristics and processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13972:2022 - **Withdrawn / published date:** 2015-09-11 _(verified: appears in the quote below)_ > 62416,TS,,ISO/TS 13972:2015,"Health informatics — Detailed clinical models, characteristics and processes","Informatique de santé — Modèles cliniques détaillés, caractéristiques et processus",2015-09-11,1,['35.240.80'],ISO/TC 215,9599,,[79498],['en'],56,"
ISO/TS 13972:2015:
ISO/TS 14033:2012 supports the application of standards and reports on environmental management. It provides guidelines on how to acquire quantitative environmental information and data and implement methodology. It gives guidelines to organizations on general principles, policy, strategy and activities necessary to obtain quantitative environmental information for internal and/or exte Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14067:2013 - **Identifier:** ISO/TS 14067:2013 _(verified: appears in the quote below)_ - **Item title:** Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and communication _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14067:2018 - **Withdrawn / published date:** 2013-05-21 _(verified: appears in the quote below)_ > 59521,TS,,ISO/TS 14067:2013,Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and communication,Gaz à effet de serre — Empreinte carbone des produits — Exigences et lignes directrices pour la quantification et la communication,2013-05-21,1,['13.020.60'],ISO/TC 207/SC 7,9599,,[71206],"['en','es','fr','ru']",52,"
ISO/TS 14067:2013 specifies principles, requirements and guidelines for the quantification and communication of the carbon footprint of a product (CFP), based on International Standards on life cycle assessment (ISO 14040 and ISO 14044) for quantification and on environmental labels and declarations (ISO 14020, ISO 14024 and ISO 14025) Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14071:2014 - **Identifier:** ISO/TS 14071:2014 _(verified: appears in the quote below)_ - **Item title:** Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14071:2024 - **Withdrawn / published date:** 2014-05-15 _(verified: appears in the quote below)_ > 61103,TS,,ISO/TS 14071:2014,Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006,Management environnemental — Analyse du cycle de vie — Processus de revue critique et compétences des vérificateurs: Exigences et lignes directrices supplémentaires à l'ISO 14044:2006,2014-05-15,1,['13.020.60'],ISO/TC 207/SC 5,9599,,[86264],"['en','fr','ru']",11,"
ISO/TS 14071:2014 provides additional specifications to ISO 14040:2006 and ISO 14044:2006. It provides requirements and guidelines for conducting a critical review of any type of LCA study and the competencies required for the review.
ISO Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14072:2014 - **Identifier:** ISO/TS 14072:2014 _(verified: appears in the quote below)_ - **Item title:** Environmental management — Life cycle assessment — Requirements and guidelines for organizational life cycle assessment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14072:2024 - **Withdrawn / published date:** 2014-12-16 _(verified: appears in the quote below)_ > 61104,TS,,ISO/TS 14072:2014,Environmental management — Life cycle assessment — Requirements and guidelines for organizational life cycle assessment,Management environnemental — Analyse du cycle de vie — Exigences et lignes directrices pour l'analyse du cycle de vie organisationnelle,2014-12-16,1,['13.020.60'],ISO/TC 207/SC 5,9599,,[86265],"['en','fr','ru']",27,"
ISO/TS 14072:2014 provides additional requirements and guidelines for an effective application of ISO 14040 and ISO 14044 to organizations.
This Technical Specification details
? the application of Life Cycle Assessment (LCA) principles and methodology to organizations,
? the benefits that LCA can bring to org Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14092:2020 - **Identifier:** ISO/TS 14092:2020 _(verified: appears in the quote below)_ - **Item title:** Adaptation to climate change — Requirements and guidance on adaptation planning for local governments and communities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14092:2026 - **Withdrawn / published date:** 2020-05-21 _(verified: appears in the quote below)_ > 68509,TS,,ISO/TS 14092:2020,Adaptation to climate change — Requirements and guidance on adaptation planning for local governments and communities,Adaptation au changement climatique — Exigences et recommandations relatives à la planification de l'adaptation pour les autorités locales et les communautés,2020-05-21,1,['13.020.40'],ISO/TC 207/SC 7,9599,,[90188],"['en','es']",41,"
This document specifies requirements and guidance on adaptation planning for local governments and communities.
This document supports local governments and communities in adapting to climate change based on vulnerability, impacts and risk assessments. In working with relevant interested parties, it also suppor Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14167:2003 - **Identifier:** ISO/TS 14167:2003 _(verified: appears in the quote below)_ - **Item title:** Gas analysis — General quality assurance aspects in the use of calibration gas mixtures - Guidelines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14167:2018 | ISO/PWI 14167 - **Withdrawn / published date:** 2003-04-28 _(verified: appears in the quote below)_ > 37802,TS,,ISO/TS 14167:2003,Gas analysis — General quality assurance aspects in the use of calibration gas mixtures - Guidelines,Analyse des gaz — Aspects généraux de l'assurance qualité dans l'utilisation de mélanges de gaz pour étalonnage — Lignes directrices,2003-04-28,1,['71.040.40'],ISO/TC 158,9599,,"[69930,56740]",['en'],23,"
ISO/TS 14167:2003 provides guidance on the quality aspects in the field of gas analysis that are implemented in order to achieve a result with a valid measurement uncertainty.
It provides guidelines on quality aspects to be employed in gas analysis using calibration gas mixtures and their subsequent validation and/or verification, and the testing of the an Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14198:2012 - **Identifier:** ISO/TS 14198:2012 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 14198:2019 - **Withdrawn / published date:** 2012-11-07 _(verified: appears in the quote below)_ > 54496,TS,,ISO/TS 14198:2012,Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems,Véhicules routiers — Aspects ergonomiques des systèmes d'information et de contrôle du transport — Tâches de calibration pour méthodes qui évaluent la distraction du conducteur due à l'utilisation des systèmes embarqués,2012-11-07,1,"['13.180','43.040.15']",ISO/TC 22/SC 39,9599,,[71509],['en'],16,"
ISO/TS 14198:2012 provides procedures that can be used as a secondary task in a dual task setting to determine whether that evaluation setting is standardized and valid for purposes of assessing Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14253-2:1999 - **Identifier:** ISO/TS 14253-2:1999 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14253-2:2011 - **Withdrawn / published date:** 1999-12-16 _(verified: appears in the quote below)_ > 28087,TS,,ISO/TS 14253-2:1999,"Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification","Spécification géométrique des produits (GPS) — Vérification par la mesure des pièces et des équipements de mesure — Partie 2: Guide pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de mesure et dans la vérification des produits",1999-12-16,1,['17.040.40'],ISO/TC 213,9599,,[53631],"['en','fr']",73, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14253-2:1999/Cor 1:2007 - **Identifier:** ISO/TS 14253-2:1999/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14253-2:2011 - **Withdrawn / published date:** 2007-10-09 _(verified: appears in the quote below)_ > 46106,TS,Cor,ISO/TS 14253-2:1999/Cor 1:2007,"Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification — Technical Corrigendum 1","Spécification géométrique des produits (GPS) — Vérification par la mesure des pièces et des équipements de mesure — Partie 2: Guide pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de mesure et dans la vérification des produits — Rectificatif technique 1",2007-10-09,1,['17.040.40'],ISO/TC 213,9599,,[53631],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14253-3:2002 - **Identifier:** ISO/TS 14253-3:2002 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14253-3:2011 - **Withdrawn / published date:** 2002-10-22 _(verified: appears in the quote below)_ > 31548,TS,,ISO/TS 14253-3:2002,Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements,Spécification géométrique des produits (GPS) — Vérification par la mesure des pièces et des équipements de mesure — Partie 3: Lignes directrices pour l'obtention d'accords sur la déclaration des incertitudes de mesure,2002-10-22,1,['17.040.40'],ISO/TC 213,9599,,[53626],"['en','fr']",13,"
ISO/TS 14253 provides guidelines and defines procedures for assisting the customer and supplier to reach amicable agreements on disputed measurement uncertainty statements regulated in acc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14265:2011 - **Identifier:** ISO/TS 14265:2011 _(verified: appears in the quote below)_ - **Item title:** Health Informatics - Classification of purposes for processing personal health information _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 14265:2024 - **Withdrawn / published date:** 2011-10-28 _(verified: appears in the quote below)_ > 54547,TS,,ISO/TS 14265:2011,Health Informatics - Classification of purposes for processing personal health information,Informatique de santé — Classification des besoins pour le traitement des informations de santé personnelles,2011-10-28,1,['35.240.80'],ISO/TC 215,9599,,[83447],['en'],13,"
ISO/TS 14265:2011 defines a set of high-level categories of purposes for which personal health information can be processed. This is in order to provide a framework for classifying the various specific purposes that can be defined and used by individual policy domains (e.g. healthcare organizations, regional health authorities, jurisdictions, countries) as an aid to the consistent management of informat Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14441:2013 - **Identifier:** ISO/TS 14441:2013 _(verified: appears in the quote below)_ - **Item title:** Health informatics — Security and privacy requirements of EHR systems for use in conformity assessment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 27799:2025 | ISO/NP TS 14441 - **Withdrawn / published date:** 2013-12-03 _(verified: appears in the quote below)_ > 61347,TS,,ISO/TS 14441:2013,Health informatics — Security and privacy requirements of EHR systems for use in conformity assessment,Informatique de santé — Sécurité et exigences d'intimité des systèmes de EHR pour l'évaluation de la conformité,2013-12-03,1,['35.240.80'],ISO/TC 215,9599,,"[84647,80018]",['en'],112,"
ISO/TS 14441:2013 examines electronic patient record systems at the clinical point of care that are also interoperable with EHRs. ISO/TS 14441:2013 addresses their security and privacy protections by providing a set of security and privacy requirements, along with guidelines and best practice for conformity assessment.
ISO/TS 14441:2013 includes a cross-mapping of 82 securi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14505-1:2007 - **Identifier:** ISO/TS 14505-1:2007 _(verified: appears in the quote below)_ - **Item title:** Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14505-1:2026 | ISO/PWI TS 14505-1 - **Withdrawn / published date:** 2007-02-09 _(verified: appears in the quote below)_ > 38265,TS,,ISO/TS 14505-1:2007,Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress,Ergonomie des ambiances thermiques — Évaluation des ambiances thermiques dans les véhicules — Partie 1: Principes et méthodes d'évaluation de la contrainte thermique,2007-02-09,1,"['13.180','43.020']",ISO/TC 159/SC 5,9599,,"[86858,78236]","['en','fr']",8,"
ISO 14505-1:2007 gives guidelines for the assessment of thermal stress inside vehicles used for land, sea and air operation. It offers information about the assessment of hot, cold as well as moderate thermal environments by referring to different methods, a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14569-1:1999 - **Identifier:** ISO/TS 14569-1:1999 _(verified: appears in the quote below)_ - **Item title:** Dental materials — Guidance on testing of wear — Part 1: Wear by toothbrushing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 14569-1:2007 - **Withdrawn / published date:** 1999-09-02 _(verified: appears in the quote below)_ > 31417,TS,,ISO/TS 14569-1:1999,Dental materials — Guidance on testing of wear — Part 1: Wear by toothbrushing,Produits dentaires — Lignes directrices sur les essais de résistance à l'usure — Partie 1: Usure par brossage des dents,1999-09-02,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[45741],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TS 14687-2:2008 - **Identifier:** ISO/TS 14687-2:2008 _(verified: appears in the quote below)_ - **Item title:** Hydrogen fuel — Product specification — Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14687-2:2012 - **Withdrawn / published date:** 2008-02-21 _(verified: appears in the quote below)_ > 43994,TS,,ISO/TS 14687-2:2008,Hydrogen fuel — Product specification — Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles,Carburant hydrogène — Spécification de produit — Partie 2: Applications des piles à combustible à membrane à échange de protons (MEP) pour les véhicules routiers,2008-02-21,1,"['43.060.40','71.100.20']",ISO/TC 197,9599,,[55083],"['en','fr']",7,
ISO/TS 14687-2:2008 specifies the quality characteristics of hydrogen fuel in order to assure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 239](https://referencesource.org/iso-standard-supersessions/p/239/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 241](https://referencesource.org/iso-standard-supersessions/p/241/) Last verified: 2026-08-05. Review by: 2027-02-02.