The principle consists in evaporation of the test portion, taking up by means of hydrochloric acid and reduction of iron(III) by means of hydroxylammonium chloride. Formation of an iron(II)-2.2'-bipyridyl complex in a buffered medium at a pH value between 4.5 and 6. Photometric measurement of the coloured complex at a wavelength of about 522 nm.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 91:1970 - **Identifier:** ISO/R 91:1970 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 91-1970 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 91-1:1982 - **Withdrawn / published date:** 1970-12-01 _(verified: appears in the quote below)_ > 3746,R,,ISO/R 91:1970,Withdrawal of ISO/R 91-1970,Annulation de l'ISO/R 91-1970,1970-12-01,1,['75.180.30'],ISO/TC 28,9599,,[3748],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 915:1968 - **Identifier:** ISO/R 915:1968 _(verified: appears in the quote below)_ - **Item title:** Sulphuric acid and oleum for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 915 - **Withdrawn / published date:** 1968-12-01 _(verified: appears in the quote below)_ > 5321,R,,ISO/R 915:1968,"Sulphuric acid and oleum for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method","Acide sulfurique et oléums à usage industriel — Dosage du fer — Méthode spectrophotométrique au 2,2'- bipyridyle",1968-12-01,1,['71.060.30'],ISO/TC 47,9599,,[5320],"['en','fr']",5,"The principle is based on evaporation of the test portion, taking up by means of hydrochloric acid and reduction of iron(III) by means of hydroxylammonium chloride. Formation of an iron(II) 2,2'-bipyridyl complex in a buffered medium at a pH value between 4.5 and 6. Spectrophotometric measurement of the coloured complex at a wavelength of about 522 nm. The method is a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 916:1968 - **Identifier:** ISO/R 916:1968 _(verified: appears in the quote below)_ - **Item title:** Testing of refrigerating systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 916 | ISO 916:2020 - **Withdrawn / published date:** 1968-12-01 _(verified: appears in the quote below)_ > 5322,R,,ISO/R 916:1968,Testing of refrigerating systems,Essais des machines frigorifiques,1968-12-01,1,['27.200'],ISO/TC 86,9599,,"[70972,72208]","['en','fr']",16,"
Covers the determination of the technical performance of a refrigerating system, but not the functional duty of a complete installation or the performance of its individual components. The term 'refrigerating system' implies the conventional vapour compression type consisting of compressing, condensing and evaporating apparatus, together with the interconnecting piping, and the accessories necessary to complete the refrigerant circuit.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 919:1969 - **Identifier:** ISO/R 919:1969 _(verified: appears in the quote below)_ - **Item title:** Guide for the preparation of classified vocabularies (example of method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10241:1992 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5330,R,,ISO/R 919:1969,Guide for the preparation of classified vocabularies (example of method),Guide pour l'élaboration des vocabulaires systématiques (exemple de méthode),1969-01-01,1,['01.140.20'],ISO/TC 37,9599,,[18278],['en'],10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 922:1969 - **Identifier:** ISO/R 922:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 922-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1873-1:1991 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5337,R,,ISO/R 922:1969,Withdrawal of ISO/R 922-1969,Annulation de l'ISO/R 922-1969,1969-01-01,1,['83.080.01'],ISO/TC 61,9599,,[6547],['en'],4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 926:1969 - **Identifier:** ISO/R 926:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 926-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 333:1983 | ISO 622:1981 | ISO 352:1981 | ISO 334:1975 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5342,R,,ISO/R 926:1969,Withdrawal of ISO/R 926-1969,Annulation de l'ISO/R 926-1969,1969-12-01,1,['75.160.10'],ISO/TC 27,9599,,"[4277,4742,4305,4279]",['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 93-1:1963 - **Identifier:** ISO/R 93-1:1963 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 93/1-1963 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 93-1:1982 - **Withdrawn / published date:** 1963-12-01 _(verified: appears in the quote below)_ > 3752,R,,ISO/R 93-1:1963,Withdrawal of ISO/R 93/1-1963,Annulation de l'ISO/R 93/1-1963,1963-12-01,1,['59.120.10'],ISO/TC 72,9599,,[3753],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 93-2:1969 - **Identifier:** ISO/R 93-2:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 93/II-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 93-1:1982 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 3754,R,,ISO/R 93-2:1969,Withdrawal of ISO/R 93/II-1969,Annulation de l'ISO/R 93/II-1969,1969-12-01,1,['59.120.10'],ISO/TC 72,9599,,[3753],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 93-3:1969 - **Identifier:** ISO/R 93-3:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 93/III-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 93-1:1982 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 3756,R,,ISO/R 93-3:1969,Withdrawal of ISO/R 93/III-1969,Annulation de l'ISO/R 93/III-1969,1969-12-01,1,['59.120.10'],ISO/TC 72,9599,,[3753],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 932:1969 - **Identifier:** ISO/R 932:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 932-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 663:1981 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5350,R,,ISO/R 932:1969,Withdrawal of ISO/R 932-1969,Annulation de l'ISO/R 932-1969,1969-01-01,1,['67.080.01'],ISO/TC 34,9599,,[4821],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 933:1969 - **Identifier:** ISO/R 933:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 933-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 662:1980 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5351,R,,ISO/R 933:1969,Withdrawal of ISO/R 933-1969,Annulation de l'ISO/R 933-1969,1969-01-01,1,['67.080.01'],ISO/TC 34,9599,,[4820],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 942:1969 - **Identifier:** ISO/R 942:1969 _(verified: appears in the quote below)_ - **Item title:** Whiteheart malleable cast iron _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5922:1981 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5362,R,,ISO/R 942:1969,Whiteheart malleable cast iron,Fonte malléable à coeur blanc,1969-01-01,1,['77.080.10'],ISO/TC 25,9599,,[12115],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 943:1969 - **Identifier:** ISO/R 943:1969 _(verified: appears in the quote below)_ - **Item title:** Blackheart malleable cast iron _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5922:1981 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5363,R,,ISO/R 943:1969,Blackheart malleable cast iron,Fonte malléable à coeur noir,1969-01-01,1,['77.080.10'],ISO/TC 25,9599,,[12115],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 944:1969 - **Identifier:** ISO/R 944:1969 _(verified: appears in the quote below)_ - **Item title:** Pearlitic malleable cast iron _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5922:1981 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5364,R,,ISO/R 944:1969,Pearlitic malleable cast iron,Fonte malléable perlitique,1969-01-01,1,['77.080.10'],ISO/TC 25,9599,,[12115],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 947:1969 - **Identifier:** ISO/R 947:1969 _(verified: appears in the quote below)_ - **Item title:** Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1106-3:1984 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5367,R,,ISO/R 947:1969,Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness,"Pratiques recommandées pour l'examen radiographique des joints circulaires bout à bout, soudés par fusion sur tubes d'acier d'épaisseur inférieure à 50 mm (2 in)",1969-01-01,1,['25.160.40'],ISO/TC 44,9599,,[5626],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 947:1969/Add 1:1969 - **Identifier:** ISO/R 947:1969/Add 1:1969 _(verified: appears in the quote below)_ - **Item title:** Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness — Addendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1106-3:1984 - **Withdrawn / published date:** 1969-09-01 _(verified: appears in the quote below)_ > 5368,IS,Add,ISO/R 947:1969/Add 1:1969,Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness — Addendum 1,"Pratiques recommandées pour l'examen radiographique des joints circulaires bout à bout, soudés par fusion sur tubes d'acier d'épaisseur inférieure à 50 mm (2 in) — Additif 1",1969-09-01,1,['25.160.40'],ISO/TC 44,9599,,[5626],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 952:1969 - **Identifier:** ISO/R 952:1969 _(verified: appears in the quote below)_ - **Item title:** Tensile testing of light metal and light metal alloy tubes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6892:1984 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5376,R,,ISO/R 952:1969,Tensile testing of light metal and light metal alloy tubes,Essai de traction des tubes en métaux légers et en leurs alliages,1969-01-01,1,['77.040.10'],ISO/TC 164/SC 1,9599,,[13414],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 953:1969 - **Identifier:** ISO/R 953:1969 _(verified: appears in the quote below)_ - **Item title:** Drift expanding test on light metal and light metal alloy tubes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8493:1986 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5377,R,,ISO/R 953:1969,Drift expanding test on light metal and light metal alloy tubes,Essai d'évasement des tubes en métaux légers et en leurs alliages,1969-01-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[15703],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 954:1969 - **Identifier:** ISO/R 954:1969 _(verified: appears in the quote below)_ - **Item title:** Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7438:1985 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5378,R,,ISO/R 954:1969,"Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in)","Essai de pliage simple pour les tôles et bandes en métaux légers et en leurs alliages d'épaisseur comprise entre 0,2 mm (0,008 in) et 7 mm (0,25 in)",1969-01-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[14174],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 955:1969 - **Identifier:** ISO/R 955:1969 _(verified: appears in the quote below)_ - **Item title:** Flattening test on aluminium and aluminium alloy tubes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8492:1986 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5379,R,,ISO/R 955:1969,Flattening test on aluminium and aluminium alloy tubes,Essai d'aplatissement pour les tubes en aluminium et en alliages d'aluminium,1969-01-01,1,"['77.150.10','77.040.10']",ISO/TC 164/SC 2,9599,,[15702],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 956:1969 - **Identifier:** ISO/R 956:1969 _(verified: appears in the quote below)_ - **Item title:** Tensile test for light metal and light metal alloy wires _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6892:1984 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5380,R,,ISO/R 956:1969,Tensile test for light metal and light metal alloy wires,Essai de traction pour les fils en métaux légers et en leurs alliages,1969-01-01,1,['77.040.10'],ISO/TC 164/SC 1,9599,,[13414],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 957:1969 - **Identifier:** ISO/R 957:1969 _(verified: appears in the quote below)_ - **Item title:** Simple torsion test for aluminium and aluminium alloy wire _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7800:1984 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5381,R,,ISO/R 957:1969,Simple torsion test for aluminium and aluminium alloy wire,Essai de torsion simple des fils en aluminium et alliages d'aluminium,1969-01-01,1,"['77.150.10','77.040.10']",ISO/TC 164/SC 2,9599,,[14694],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 958:1969 - **Identifier:** ISO/R 958:1969 _(verified: appears in the quote below)_ - **Item title:** Wrapping test for aluminium and aluminium alloy wire _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7802:1983 - **Withdrawn / published date:** 1969-01-01 _(verified: appears in the quote below)_ > 5382,R,,ISO/R 958:1969,Wrapping test for aluminium and aluminium alloy wire,Esai d'enroulement des fils en aluminium et alliage d'aluminium,1969-01-01,1,"['77.150.10','77.040.10']",ISO/TC 164/SC 2,9599,,[14696],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 959:1969 - **Identifier:** ISO/R 959:1969 _(verified: appears in the quote below)_ - **Item title:** Spices and condiments — Black pepper and white pepper, whole and ground — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 959-1:1989 | ISO 959-2:1989 - **Withdrawn / published date:** 1969-02-01 _(verified: appears in the quote below)_ > 5383,R,,ISO/R 959:1969,"Spices and condiments — Black pepper and white pepper, whole and ground — Specification","Épices — Poivre noir et poivre blanc, entier et en poudre — Spécifications",1969-02-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,"[5384,5385]","['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 960:1969 - **Identifier:** ISO/R 960:1969 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the water content in polyamides _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 960:1988 - **Withdrawn / published date:** 1969-02-01 _(verified: appears in the quote below)_ > 5386,R,,ISO/R 960:1969,Plastics — Determination of the water content in polyamides,Matières plastiques — Détermination de la teneur en eau des polyamides,1969-02-01,1,['83.080.20'],ISO/TC 61,9599,,[5387],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 967:1969 - **Identifier:** ISO/R 967:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 967-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1750:1981 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5401,R,,ISO/R 967:1969,Withdrawal of ISO/R 967-1969,Annulation de l'ISO/R 967-1969,1969-12-01,1,['65.100.01'],ISO/TC 81,9599,,[6370],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 968:1968 - **Identifier:** ISO/R 968:1968 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 968-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1750:1981 - **Withdrawn / published date:** 1968-12-01 _(verified: appears in the quote below)_ > 5402,R,,ISO/R 968:1968,Withdrawal of ISO/R 968-1969,Annulation de l'ISO/R 968-1969,1968-12-01,1,['65.100.01'],ISO/TC 81,9599,,[6370],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 969:1969 - **Identifier:** ISO/R 969:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 969-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1750:1981 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5403,R,,ISO/R 969:1969,Withdrawal of ISO/R 969-1969,Annulation de l'ISO/R 969-1969,1969-12-01,1,['65.100.01'],ISO/TC 81,9599,,[6370],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 970:1969 - **Identifier:** ISO/R 970:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 970-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1750:1981 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5404,R,,ISO/R 970:1969,Withdrawal of ISO/R 970-1969,Annulation de l'ISO/R 970-1969,1969-12-01,1,['65.100.01'],ISO/TC 81,9599,,[6370],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 971:1969 - **Identifier:** ISO/R 971:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 971-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1750:1981 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5405,R,,ISO/R 971:1969,Withdrawal of ISO/R 971-1969,Annulation de l'ISO/R 971-1969,1969-12-01,1,['65.100.01'],ISO/TC 81,9599,,[6370],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 977:1969 - **Identifier:** ISO/R 977:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 977-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3195:1975 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5415,R,,ISO/R 977:1969,Withdrawal of ISO/R 977-1969,Annulation de l'ISO/R 977-1969,1969-12-01,1,['71.060.40'],ISO/TC 47,9599,,[8392],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 978:1969 - **Identifier:** ISO/R 978:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 978-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3195:1975 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5416,R,,ISO/R 978:1969,Withdrawal of ISO/R 978-1969,Annulation de l'ISO/R 978-1969,1969-12-01,1,['71.060.40'],ISO/TC 47,9599,,[8392],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 988:1969 - **Identifier:** ISO/R 988:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 988-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2466:1973 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5430,R,,ISO/R 988:1969,Withdrawal of ISO/R 988-1969,Annulation de l'ISO/R 988-1969,1969-12-01,1,['71.060.40'],ISO/TC 47,9599,,[7381],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/R 989:1969 - **Identifier:** ISO/R 989:1969 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO/R 989-1969 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2466:1973 - **Withdrawn / published date:** 1969-12-01 _(verified: appears in the quote below)_ > 5431,R,,ISO/R 989:1969,Withdrawal of ISO/R 989-1969,Annulation de l'ISO/R 989-1969,1969-12-01,1,['71.060.40'],ISO/TC 47,9599,,[7381],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10013:2001 - **Identifier:** ISO/TR 10013:2001 _(verified: appears in the quote below)_ - **Item title:** Guidelines for quality management system documentation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10013:2021 - **Withdrawn / published date:** 2001-07-12 _(verified: appears in the quote below)_ > 26978,TR,,ISO/TR 10013:2001,Guidelines for quality management system documentation,Lignes directrices pour la documentation des systèmes de management de la qualité,2001-07-12,1,['03.120.10'],ISO/TC 176/SC 3,9599,[2400],[75736],"['ar','en','es','fr','ru']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10014:1998 - **Identifier:** ISO/TR 10014:1998 _(verified: appears in the quote below)_ - **Item title:** Guidelines for managing the economics of quality _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10014:2006 - **Withdrawn / published date:** 1998-07-23 _(verified: appears in the quote below)_ > 1516,TR,,ISO/TR 10014:1998,Guidelines for managing the economics of quality,Lignes directrices pour le management des effets économiques de la qualité,1998-07-23,1,['03.120.10'],ISO/TC 176/SC 3,9599,,[37263],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10017:1999 - **Identifier:** ISO/TR 10017:1999 _(verified: appears in the quote below)_ - **Item title:** Guidance on statistical techniques for ISO 9001:1994 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10017:2003 - **Withdrawn / published date:** 1999-09-02 _(verified: appears in the quote below)_ > 25334,TR,,ISO/TR 10017:1999,Guidance on statistical techniques for ISO 9001:1994,Lignes directrices pour les techniques statistiques relatives à l'ISO 9001:1994,1999-09-02,1,"['03.100.70','03.120.30']",ISO/TC 176/SC 3,9599,,[36674],['en'],24, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10017:2003 - **Identifier:** ISO/TR 10017:2003 _(verified: appears in the quote below)_ - **Item title:** Guidance on statistical techniques for ISO 9001:2000 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10017:2021 | ISO/DTR 10017 - **Withdrawn / published date:** 2003-05-08 _(verified: appears in the quote below)_ > 36674,TR,,ISO/TR 10017:2003,Guidance on statistical techniques for ISO 9001:2000,Lignes directrices pour les techniques statistiques relatives à l'ISO 9001:2000,2003-05-08,2,"['03.120.10','03.120.30']",ISO/TC 176/SC 3,9599,[25334],"[77577,75426]","['en','es','ru']",26,"ISO/TR 10017:2003 provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance with ISO 9001. This is done by examining those requirements of ISO 9001 that involve the use of quantitative data, and then identifying and describing the statistical techniques that can be useful when Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10064-1:1992 - **Identifier:** ISO/TR 10064-1:1992 _(verified: appears in the quote below)_ - **Item title:** Code of inspection practice — Part 1: Inspection of corresponding flanks of gear teeth _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI TR 10064-1 | ISO/TR 10064-1:2017 - **Withdrawn / published date:** 1992-01-29 _(verified: appears in the quote below)_ > 18032,TR,,ISO/TR 10064-1:1992,Code of inspection practice — Part 1: Inspection of corresponding flanks of gear teeth,Code pratique de réception — Partie 1: Contrôle relatif aux flancs homologues de la denture,1992-01-29,1,['21.200'],ISO/TC 60,9599,,"[61034,69972]","['en','fr']",40,"
Provides advice on gear inspection methods and gives an analysis of measurement results, so it supplements the standard ISO 1328, Part 1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10064-1:1992/Cor 1:2006 - **Identifier:** ISO/TR 10064-1:1992/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Code of inspection practice — Part 1: Inspection of corresponding flanks of gear teeth — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI TR 10064-1 | ISO/TR 10064-1:2017 - **Withdrawn / published date:** 2006-08-09 _(verified: appears in the quote below)_ > 44618,TR,Cor,ISO/TR 10064-1:1992/Cor 1:2006,Code of inspection practice — Part 1: Inspection of corresponding flanks of gear teeth — Technical Corrigendum 1,Code pratique de réception — Partie 1: Contrôle relatif aux flancs homologues de la denture — Rectificatif technique 1,2006-08-09,1,['21.200'],ISO/TC 60,9599,,"[61034,69972]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10064-1:2017 - **Identifier:** ISO/TR 10064-1:2017 _(verified: appears in the quote below)_ - **Item title:** Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10064-1:2019 - **Withdrawn / published date:** 2017-07-12 _(verified: appears in the quote below)_ > 69972,TR,,ISO/TR 10064-1:2017,Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks,Code pratique de réception — Partie 1: Mesure des flancs dentaires cylindriques,2017-07-12,2,['21.200'],ISO/TC 60,9599,"[44618,18032]",[77653],['en'],89,"ISO/TR 10064-1:2017 supplements ISO 1328‑1:2013. It provides a code of practice dealing with measurements on flanks of individual cylindrical involute gears, i.e. with the measurement of pitch, profile, helix and tangential composite characteristics. It describes measuring equipment, provides advice for gear measuring methods and for the analysis of measurement results, and discusses the interpretation of results.
Measur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10093:2017 - **Identifier:** ISO/TR 10093:2017 _(verified: appears in the quote below)_ - **Item title:** Plastics — Fire tests — Standard ignition sources _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10093:2018 - **Withdrawn / published date:** 2017-11-30 _(verified: appears in the quote below)_ > 67762,TR,,ISO/TR 10093:2017,Plastics — Fire tests — Standard ignition sources,Plastiques — Essais au feu — Sources d'allumage normalisées,2017-11-30,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,[24991],[75298],['en'],39,"
ISO/TR 10093:2017 describes and classifies a range of laboratory ignition sources for use in fire tests on plastics and products consisting substantially of plastics. These sources vary in intensity and area of impingement. They are suitable for use to simulate the initial thermal abuse to which plastics are potentially exposed in certain actual fire risk scenarios.
Different standards developing organizations have issued many standard test methods, specificati Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10093:2018 - **Identifier:** ISO/TR 10093:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics — Fire tests — Standard ignition sources _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10093:2020 - **Withdrawn / published date:** 2018-09-11 _(verified: appears in the quote below)_ > 75298,TR,,ISO/TR 10093:2018,Plastics — Fire tests — Standard ignition sources,Plastiques — Essais au feu — Sources d'allumage normalisées,2018-09-11,2,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,[67762],[79711],['en'],40,"
This document describes and classifies a range of laboratory ignition sources for use in fire tests on plastics and products consisting substantially of plastics. These sources vary in intensity and area of impingement. They are suitable for use to simulate the initial thermal abuse to which plastics are potentially exposed in certain actual fire risk scenarios.
Different standards developing organizations have issued many standard test methods, specifications Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10108:1989 - **Identifier:** ISO/TR 10108:1989 _(verified: appears in the quote below)_ - **Item title:** Steel — Conversion of hardness values to tensile strength values _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD TS 10108 - **Withdrawn / published date:** 1989-08-24 _(verified: appears in the quote below)_ > 18084,TR,,ISO/TR 10108:1989,Steel — Conversion of hardness values to tensile strength values,Acier — Valeurs de conversion de la dureté à la résistance à la traction,1989-08-24,1,['77.040.10'],ISO/TC 17/SC 20,9599,,[65585],"['en','fr']",5,
Describes the bands for conversion of hardness to tensile strength established to hardness scales of Brinell and Vickers as well as rules for their use. Applies to any steel but only to products in full section (thickness over 2 mm).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10129:1993 - **Identifier:** ISO/TR 10129:1993 _(verified: appears in the quote below)_ - **Item title:** Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10129:2006 - **Withdrawn / published date:** 1993-05-20 _(verified: appears in the quote below)_ > 18116,TR,,ISO/TR 10129:1993,Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions,Paliers lisses — Essai des matériaux antifriction — Résistance à la corrosion par des lubrifiants dans des conditions statiques,1993-05-20,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[36809],"['en','fr']",3,"Specifies in detail a corrosion test under conditions of static load, i.e. without any mechanical action taking place simultaneously. In order for corrosion tests to be evaluated and compared, it is necessary to carry them out in accordance with the conditions laid down in this report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10193:1989 - **Identifier:** ISO/TR 10193:1989 _(verified: appears in the quote below)_ - **Item title:** Round general use light gauge metal containers — Nominal filling volumes and nominal diameters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10193:2000 - **Withdrawn / published date:** 1989-12-21 _(verified: appears in the quote below)_ > 18221,TR,,ISO/TR 10193:1989,Round general use light gauge metal containers — Nominal filling volumes and nominal diameters,Récipients métalliques légers ronds à usage général — Volumes nominaux de remplissage et diamètres nominaux,1989-12-21,1,['55.120'],ISO/TC 52,9599,,[31448],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10201:1989 - **Identifier:** ISO/TR 10201:1989 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Standards for electronic instruments and systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10201:1991 - **Withdrawn / published date:** 1989-10-12 _(verified: appears in the quote below)_ > 18228,TR,,ISO/TR 10201:1989,Aerospace — Standards for electronic instruments and systems,Aéronautique et espace — Normes d'instruments et de systèmes électroniques,1989-10-12,1,['49.090'],ISO/TC 20,9599,,[18229],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10201:1991 - **Identifier:** ISO/TR 10201:1991 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Standards for electronic instruments and systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10201:1996 - **Withdrawn / published date:** 1991-11-14 _(verified: appears in the quote below)_ > 18229,TR,,ISO/TR 10201:1991,Aerospace — Standards for electronic instruments and systems,Aéronautique et espace — Normes d'instruments et de systèmes électroniques,1991-11-14,2,['49.090'],ISO/TC 20,9599,[18228],[25797],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10201:1996 - **Identifier:** ISO/TR 10201:1996 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Standards for electronic instruments and systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10201:2001 - **Withdrawn / published date:** 1996-06-20 _(verified: appears in the quote below)_ > 25797,TR,,ISO/TR 10201:1996,Aerospace — Standards for electronic instruments and systems,Aéronautique et espace — Normes d'instruments et de systèmes électroniques,1996-06-20,3,['49.090'],ISO/TC 20,9599,[18229],[34876],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10271:1993 - **Identifier:** ISO/TR 10271:1993 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Determination of tarnish and corrosion of metals and alloys _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10271:2001 - **Withdrawn / published date:** 1993-05-27 _(verified: appears in the quote below)_ > 18311,TR,,ISO/TR 10271:1993,Dentistry — Determination of tarnish and corrosion of metals and alloys,Art dentaire — Détermination du ternissement et de la corrosion des métaux et alliages,1993-05-27,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[23855],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10300-30:2017 - **Identifier:** ISO/TR 10300-30:2017 _(verified: appears in the quote below)_ - **Item title:** Calculation of load capacity of bevel gears — Part 30: ISO rating system for bevel and hypoid gears — Sample calculations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10300-30:2024 - **Withdrawn / published date:** 2017-12-12 _(verified: appears in the quote below)_ > 73534,TR,,ISO/TR 10300-30:2017,Calculation of load capacity of bevel gears — Part 30: ISO rating system for bevel and hypoid gears — Sample calculations,Calcul de la capacité de charge des engrenages coniques — Partie 30: Système d'évaluation ISO pour engrenages conique et hypoïde - Type de calculs,2017-12-12,1,['21.200'],ISO/TC 60/SC 2,9599,,[84146],['en'],246,"ISO/TR 10300-30:2017 provides sample calculations for different bevel gear designs, how the load capacity is numerically determined according to the methods and formulae of the ISO 10300 series. The initial geometric gear data necessary for these calculations in accordance with ISO 23509.
The term 'bevel gear' is used to mea Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10303-12:1997 - **Identifier:** ISO/TR 10303-12:1997 _(verified: appears in the quote below)_ - **Item title:** Industrial automation systems and integration — Product data representation and exchange — Part 12: Description methods: The EXPRESS-I language reference manual _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DTR 10303-12 - **Withdrawn / published date:** 1997-07-24 _(verified: appears in the quote below)_ > 25071,TR,,ISO/TR 10303-12:1997,Industrial automation systems and integration — Product data representation and exchange — Part 12: Description methods: The EXPRESS-I language reference manual,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 12: Méthodes descriptives: Le manuel de référence du langage EXPRESS-I,1997-07-24,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[32107],['en'],111, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10305:1992 - **Identifier:** ISO/TR 10305:1992 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Generation of standard EM field for calibration of power density meters from 20 kHz to 1 000 MHz _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10305-1:2003 | ISO/DTR 10305 | ISO/TR 10305-2:2003 - **Withdrawn / published date:** 1992-11-19 _(verified: appears in the quote below)_ > 18351,TR,,ISO/TR 10305:1992,Road vehicles — Generation of standard EM field for calibration of power density meters from 20 kHz to 1 000 MHz,Véhicules routiers — Génération de champs électromagnétiques pour l'étalonnage des champmètres entre 20 kHz et 1 000 MHz,1992-11-19,1,['43.180'],ISO/TC 22,9599,,"[36575,28532,37229]","['en','fr']",28,"
Applies to power density meters used (by the Department of Defense) in measuring high intensity (hazard level) RF fields. The techniques described are based on: parallel plate and parallel wire transmission lines, transverse electromagnetic mode transmission cells, various directive antennas and open ended waveguide. Major emphasis is on the TEM cells.< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10357:1989 - **Identifier:** ISO/TR 10357:1989 _(verified: appears in the quote below)_ - **Item title:** Conveyor belts — Formula for transition distance on three equal length idler rollers (new method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5293:2004 | ISO/WD 10357 | ISO/CD 5293 - **Withdrawn / published date:** 1989-10-19 _(verified: appears in the quote below)_ > 18414,TR,,ISO/TR 10357:1989,Conveyor belts — Formula for transition distance on three equal length idler rollers (new method),Courroies transporteuses — Formule de calcul de la distance de transition d'auge à trois rouleaux égaux (nouvelle méthode),1989-10-19,1,['53.040.20'],ISO/TC 41/SC 3,9599,,"[39063,23685,23684]","['en','fr']",6,"
Specifies the formula to calculate conveyor belt transition distances. Tabulates the ratios of average belt tension at transition to maximum recommended belt joint tension from 1,5 TR to 0,05 TR against maximum belt edge tension for 1,3 RR to 2,7 TR. Three figures illustrate shapes and reference quantities of concern. Annex A gives the derivation of the formu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10358:1993 - **Identifier:** ISO/TR 10358:1993 _(verified: appears in the quote below)_ - **Item title:** Plastics pipes and fittings — Combined chemical-resistance classification table _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10358:2021 - **Withdrawn / published date:** 1993-05-13 _(verified: appears in the quote below)_ > 18415,TR,,ISO/TR 10358:1993,Plastics pipes and fittings — Combined chemical-resistance classification table,Tubes et raccords en matières plastiques — Tableau de classification de la résistance chimique,1993-05-13,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 3,9599,"[14211,14212,12569,14209,14210]",[77005],"['en','fr']",48,"
The materials covered by the classification are: low-density polyethylene; high-density polyethylene; polypropylene; Poly(vinyl chloride), unplasticized; Poly(vinyl chloride), chlorinated; polybutene; Acrylonitrile/butadiene/styrene; Poly(vinylidene fluoride); cross-linked polyethylene. Three classes are distinguished: satisfactory resistance, limited resistance, resist Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10361:1990 - **Identifier:** ISO/TR 10361:1990 _(verified: appears in the quote below)_ - **Item title:** Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10361:2000 - **Withdrawn / published date:** 1990-11-15 _(verified: appears in the quote below)_ > 18420,TR,,ISO/TR 10361:1990,Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers,Revêtements de sol textiles — Production de changements d'aspect au moyen du tambour Vettermann et du tambour d'essai hexapode,1990-11-15,1,['97.150'],ISO/TC 219,9599,,[26837],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10400:2007 - **Identifier:** ISO/TR 10400:2007 _(verified: appears in the quote below)_ - **Item title:** Petroleum and natural gas industries — Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10400:2018 - **Withdrawn / published date:** 2007-12-13 _(verified: appears in the quote below)_ > 44107,TR,,ISO/TR 10400:2007,"Petroleum and natural gas industries — Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing","Industries du pétrole et du gaz naturel — Équations et calculs relatifs aux propriétés des tubes de cuvelage, des tubes de production, des tiges de forage et des tubes de conduites utilisés comme tubes de cuvelage et tubes de production",2007-12-13,1,['75.180.10'],ISO/TC 67/SC 5,9599,[18461],[75259],['en'],229,"
ISO/TR 10400:2007 illustrates the equations and templates necessary to calculate the various pipe properties given in International Standards, including pipe performance properties, such as axial str Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10451:1991 - **Identifier:** ISO/TR 10451:1991 _(verified: appears in the quote below)_ - **Item title:** Dental implants — State of the art — Survey of materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10451:2002 - **Withdrawn / published date:** 1991-06-20 _(verified: appears in the quote below)_ > 18513,TR,,ISO/TR 10451:1991,Dental implants — State of the art — Survey of materials,Implants dentaires — État de l'art — Répertoire des matériaux,1991-06-20,1,['11.060.15'],ISO/TC 106/SC 8,9599,,[30686],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10465-1:1993 - **Identifier:** ISO/TR 10465-1:1993 _(verified: appears in the quote below)_ - **Item title:** Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 1: Installation procedures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 10465-1:2007 - **Withdrawn / published date:** 1993-07-22 _(verified: appears in the quote below)_ > 18528,TR,,ISO/TR 10465-1:1993,Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 1: Installation procedures,Installation enterrée de canalisations flexibles en plastique renforcé de fibres de verre/résine thermodurcissable (PRV) — Partie 1: Procédures d'installation,1993-07-22,1,['23.040.01'],ISO/TC 138/SC 6,9599,,[33353],"['en','fr']",14,"
Gives pipeline installation terminology and describes the installation procedures. Refers generally to GRP pipes in particular stiffness classes for which performance requirements have been specified in at least one product standard, but it can also be used as a guide for the installation of pipes of other stiff Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10465-2:1999 - **Identifier:** ISO/TR 10465-2:1999 _(verified: appears in the quote below)_ - **Item title:** Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 2: Comparison of static calculation methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10465-2:2007 - **Withdrawn / published date:** 1999-08-05 _(verified: appears in the quote below)_ > 22418,TR,,ISO/TR 10465-2:1999,Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 2: Comparison of static calculation methods,Installation enterrée de canalisations flexibles en plastique renforcé de fibres de verre/résine thermodurcissable (PRV) — Partie 2: Comparaison de méthodes de calcul statique,1999-08-05,1,['23.040.01'],ISO/TC 138/SC 6,9599,,[38778],['en'],25, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10465-3:1999 - **Identifier:** ISO/TR 10465-3:1999 _(verified: appears in the quote below)_ - **Item title:** Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 3: Installation parameters and application limits _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10465-3:2007 - **Withdrawn / published date:** 1999-08-12 _(verified: appears in the quote below)_ > 22419,TR,,ISO/TR 10465-3:1999,Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 3: Installation parameters and application limits,Installation enterrée de canalisations flexibles en plastique renforcé de fibres de verre/résine thermodurcissable (PRV) — Partie 3: Paramètres d'installatin et limites d'application,1999-08-12,1,['23.040.01'],ISO/TC 138/SC 6,9599,,[38779],['en'],54, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10481:1993 - **Identifier:** ISO/TR 10481:1993 _(verified: appears in the quote below)_ - **Item title:** Lubricants, industrial oils and related products — Class L — Specifications of categories L-AN, L-FC, L-FD and L-G used for machine tools _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19378:2003 - **Withdrawn / published date:** 1993-12-09 _(verified: appears in the quote below)_ > 18548,TR,,ISO/TR 10481:1993,"Lubricants, industrial oils and related products — Class L — Specifications of categories L-AN, L-FC, L-FD and L-G used for machine tools","Lubrifiants, huiles industrielles et produits connexes — Classe L — Spécifications des catégories L-AN, L-FC, L-FD et L-G utilisées pour les machines-outils",1993-12-09,1,['75.100'],ISO/TC 28/SC 4,9599,,[33800],"['en','fr']",4,"
Is intended to provide the main properties and the corresponding requirements for the categories of lubricants recommended in ISO/TR 3498 for the lubrification of machine tools; for the time being, only the lubricant categories L-AN, L-FC, L-FD and L-G are included. Data for the other categories L-H Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10495:1997 - **Identifier:** ISO/TR 10495:1997 _(verified: appears in the quote below)_ - **Item title:** Cylindrical gears — Calculation of service life under variable loads — Conditions for cylindrical gears according to ISO 6336 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6336-6:2006 - **Withdrawn / published date:** 1997-08-28 _(verified: appears in the quote below)_ > 18564,TR,,ISO/TR 10495:1997,Cylindrical gears — Calculation of service life under variable loads — Conditions for cylindrical gears according to ISO 6336,Engrenages cylindriques — Calcul de la durée de vie en service sous charge variable — Conditions pour les engrenages cylindriques conformément à l'ISO 6336,1997-08-28,1,['21.200'],ISO/TC 60/SC 2,9599,,[38788],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10553:1995 - **Identifier:** ISO/TR 10553:1995 _(verified: appears in the quote below)_ - **Item title:** Indication of accuracy of quartz watches _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10553:2003 - **Withdrawn / published date:** 1995-04-06 _(verified: appears in the quote below)_ > 18638,TR,,ISO/TR 10553:1995,Indication of accuracy of quartz watches,Indication de la précision des montres à quartz,1995-04-06,1,['39.040.10'],ISO/TC 114/SC 11,9599,,[35356],"['en','fr']",6,
Describes a proposed method for the evaluation of the accuracy of quartz watches. Applies to quartz watches whose accuracy is indicated by the manufacturer. Defines the term 'accuracy' and specifies test methods for its evaluation.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10603:1992 - **Identifier:** ISO/TR 10603:1992 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Legal situation concerning lighting and light-signalling devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 10603 - **Withdrawn / published date:** 1992-05-28 _(verified: appears in the quote below)_ > 18686,TR,,ISO/TR 10603:1992,Road vehicles — Legal situation concerning lighting and light-signalling devices,Véhicules routiers — Situation légale concernant les dispositifs d'éclairage et de signalisation lumineuse,1992-05-28,1,['43.040.20'],ISO/TC 22/SC 35,9599,,[25943],"['en','fr']",13,"Presents a compilation of legal specifications of the United Nation Conference of Road Traffic, North America, Europe, Australia and Japan and shall be used when the lighting and light signalling devices of ISO 303 are designed and installed into the various road vehicles. Furthermore, the document gives the main difference between the listed requirements as well as specific national regulations and sho Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10605:1994 - **Identifier:** ISO/TR 10605:1994 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Electrical disturbances from electrostatic discharge _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10605:2001 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 18688,TR,,ISO/TR 10605:1994,Road vehicles — Electrical disturbances from electrostatic discharge,Véhicules routiers — Perturbations électriques provenant de décharges électrostatiques,1994-09-29,1,['43.040.10'],ISO/TC 22,9599,,[24562],"['en','fr']",13,
Specifies the electrostatic discharge(ESD) test methods necessary to evaluate electronic modules intended for vehicle use. Describes test procedures for evaluating both electronic modules on the bench and complete vehicles. Applies to all types of road vehicles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10623:1991 - **Identifier:** ISO/TR 10623:1991 _(verified: appears in the quote below)_ - **Item title:** Technical product documentation — Requirements for computer-aided design and draughting — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11442:2006 - **Withdrawn / published date:** 1991-12-18 _(verified: appears in the quote below)_ > 18715,TR,,ISO/TR 10623:1991,Technical product documentation — Requirements for computer-aided design and draughting — Vocabulary,Documentation technique de produits — Exigences pour la conception et le dessin assistés par ordinateur — Vocabulaire,1991-12-18,1,"['35.240.10','01.040.35','01.040.01','01.110']",ISO/TC 10/SC 1,9599,,[39380],"['en','fr']",16,Specifies 149 selected terms and definitions. Annex A (Bibliography) is for information only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10657:1991 - **Identifier:** ISO/TR 10657:1991 _(verified: appears in the quote below)_ - **Item title:** Explanatory notes on ISO 76 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10657:2021 - **Withdrawn / published date:** 1991-06-13 _(verified: appears in the quote below)_ > 18751,TR,,ISO/TR 10657:1991,Explanatory notes on ISO 76,Notes explicatives sur l'ISO 76,1991-06-13,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[65407],['en'],19, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10687:2012 - **Identifier:** ISO/TR 10687:2012 _(verified: appears in the quote below)_ - **Item title:** Mechanical vibration— Description and determination of seated postures with reference to whole-body vibration _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10687:2022 - **Withdrawn / published date:** 2012-06-27 _(verified: appears in the quote below)_ > 46055,TR,,ISO/TR 10687:2012,Mechanical vibration— Description and determination of seated postures with reference to whole-body vibration,Vibrations mécaniques — Description et détermination des postures assises en référence à des vibrations transmises à l'ensemble du corps,2012-06-27,1,['13.160'],ISO/TC 108/SC 4,9599,,[75294],"['en','fr']",21,"ISO/TR 10687:2012 summarizes descriptive quantities for those responsible (e.g. scientists, safety engineers) for determination of postures for a seated person who is exposed to whole-body vibration. It is the intention that the results of different methods which also are summarized can be easily related to these quantities and that they allow for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10719:1994 - **Identifier:** ISO/TR 10719:1994 _(verified: appears in the quote below)_ - **Item title:** Steel and iron — Determination of non-combined carbon content — Infrared absorption method after combustion in an induction furnace _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 10719:2016 - **Withdrawn / published date:** 1994-09-15 _(verified: appears in the quote below)_ > 18812,TR,,ISO/TR 10719:1994,Steel and iron — Determination of non-combined carbon content — Infrared absorption method after combustion in an induction furnace,Aciers et fontes — Dosage du carbone non combiné — Méthode par absorption dans l'infrarouge après combustion dans un four à induction,1994-09-15,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[67991],"['en','fr']",13,"
Describes an infrared absorption method after combustion in an induction furnace for the determination of the non-combined carbon content in steel and iron. Applicable to non-combined carbon contents between 0,3 % (m/m) und 3,0 % (m/m).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10722-1:1998 - **Identifier:** ISO/TR 10722-1:1998 _(verified: appears in the quote below)_ - **Item title:** Geotextiles and geotextile-related products — Procedure for simulating damage during installation — Part 1: Installation in granular materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10722:2007 | ISO/DIS 10722-1 - **Withdrawn / published date:** 1998-04-02 _(verified: appears in the quote below)_ > 18815,TR,,ISO/TR 10722-1:1998,Geotextiles and geotextile-related products — Procedure for simulating damage during installation — Part 1: Installation in granular materials,Géotextiles et produits apparentés — Mode opératoire de simulation des dégâts lors de l'installation — Partie 1: Installation dans des matériaux granulaires,1998-04-02,1,['59.080.70'],ISO/TC 221,9599,,"[45502,36525]",['en'],7,La présente prénorme internationale décrit une procédure d'endommagement des géosynthétiques en laboratoire pour simuler l'endommagement sur site lors de la pose d'un géosynthétique entre deux couches de matériaux granulaires compactés. L'endommagement est évalué visuellement ainsi que la détermin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10809-1:2009 - **Identifier:** ISO/TR 10809-1:2009 _(verified: appears in the quote below)_ - **Item title:** Cast irons — Part 1: Materials and properties for design _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10809-1:2023 - **Withdrawn / published date:** 2009-10-16 _(verified: appears in the quote below)_ > 46132,TR,,ISO/TR 10809-1:2009,Cast irons — Part 1: Materials and properties for design,Fontes — Partie 1: Matériaux et propriétés pour la conception,2009-10-16,1,['77.080.10'],ISO/TC 25,9599,,[76624],['en'],57,"
The purpose of ISO/TR 10809-1:2009 is to assist the designer and engineer in understanding the family of cast iron materials and to utilize them with a more complete knowledge of their potential, among the wide range of other engineering materials and fabrication methods now available. A considerable amount of the data provided is metallurgical, but it is usually the metallurgical aspects of the cast irons that create misunderstandings when these materials are specified. This is be Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10828:1997 - **Identifier:** ISO/TR 10828:1997 _(verified: appears in the quote below)_ - **Item title:** Worm gears — Geometry of worm profiles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10828:2015 - **Withdrawn / published date:** 1997-11-20 _(verified: appears in the quote below)_ > 1889,TR,,ISO/TR 10828:1997,Worm gears — Geometry of worm profiles,Engrenages à vis cylindriques — Géométrie des profils de vis,1997-11-20,1,['21.200'],ISO/TC 60/SC 1,9599,,[55352],"['en','fr']",20, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10828:1997/Cor 1:1998 - **Identifier:** ISO/TR 10828:1997/Cor 1:1998 _(verified: appears in the quote below)_ - **Item title:** Worm gears — Geometry of worm profiles — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10828:2015 - **Withdrawn / published date:** 1998-10-29 _(verified: appears in the quote below)_ > 30884,TR,Cor,ISO/TR 10828:1997/Cor 1:1998,Worm gears — Geometry of worm profiles — Technical Corrigendum 1,Engrenages à vis cylindriques — Géométrie des profils de vis — Rectificatif technique 1,1998-10-29,1,['21.200'],ISO/TC 60/SC 1,9599,,[55352],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10828:2015 - **Identifier:** ISO/TR 10828:2015 _(verified: appears in the quote below)_ - **Item title:** Worm gears — Worm profiles and gear mesh geometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10828:2024 - **Withdrawn / published date:** 2015-08-10 _(verified: appears in the quote below)_ > 55352,TR,,ISO/TR 10828:2015,Worm gears — Worm profiles and gear mesh geometry,Engrenages à vis cylindriques — Géométrique des profils de vis et des engrènements,2015-08-10,2,['21.200'],ISO/TC 60/SC 1,9599,"[1889,30884]",[82651],"['en','fr']",95,"
ISO/TR 10828:2015, thread profiles of the five most common types of worms at the date of publication are described and formulae of their axial profiles are given.
The five worm types covered in this technical report are designated by the letters A, C, I, K and N.
The formulae to calculate the path of contact, the conjugate profile of the worm wheel, the lines of contact, the radius of curvature and the velocities at points of contact a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10837:1991 - **Identifier:** ISO/TR 10837:1991 _(verified: appears in the quote below)_ - **Item title:** Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-6:2008 - **Withdrawn / published date:** 1991-07-11 _(verified: appears in the quote below)_ > 18873,TR,,ISO/TR 10837:1991,Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings,Détermination de la stabilité thermique du polyéthylène (PE) destiné à être utilisé dans les tubes et raccords pour la distribution du gaz,1991-07-11,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,,[42718],"['en','fr']",4,
Specifies a method of measuring the oxidative thermal stability in oxygen at typical processing and welding temperatures. The thermal stability measured by this method depends on mass and size of the test specimen used.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10840:1993 - **Identifier:** ISO/TR 10840:1993 _(verified: appears in the quote below)_ - **Item title:** Plastics — Burning behaviour — Guidance for development and use of fire tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10840:2003 - **Withdrawn / published date:** 1993-10-28 _(verified: appears in the quote below)_ > 18878,TR,,ISO/TR 10840:1993,Plastics — Burning behaviour — Guidance for development and use of fire tests,Plastiques — Lignes directrices pour le développement et l'utilisation d'essais au feu,1993-10-28,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[31268],"['en','fr']",9,"Provides guidance on fire testing of plastics (fire scenarios and models, types of fire tests, characteristics of burning behaviour, design of fire tests, aspects of fire hazard assessment) for manufacturers, converters, users, specifiers and regulators. This guidance applies in particular to the working groups of ISO/TC 61/SC 4 and is applicable to all the test methods developed by this sub-committee. Fire tests Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10840:1993/Cor 1:1995 - **Identifier:** ISO/TR 10840:1993/Cor 1:1995 _(verified: appears in the quote below)_ - **Item title:** Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10840:2003 - **Withdrawn / published date:** 1995-11-09 _(verified: appears in the quote below)_ > 26541,TR,Cor,ISO/TR 10840:1993/Cor 1:1995,Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1,Plastiques — Lignes directrices pour le développement et l'utilisation d'essais au feu — Rectificatif technique 1,1995-11-09,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[31268],"['en','fr']",1,"
In Table 1 in column 3, delete the reference to IEC 195.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10949:1996 - **Identifier:** ISO/TR 10949:1996 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Methods for cleaning and for assessing the cleanliness level of components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10949:2002 | ISO/CD 10949 - **Withdrawn / published date:** 1996-09-19 _(verified: appears in the quote below)_ > 18925,TR,,ISO/TR 10949:1996,Hydraulic fluid power — Methods for cleaning and for assessing the cleanliness level of components,Transmissions hydrauliques — Méthodes de nettoyage et d'évaluation du niveau de propreté des composants,1996-09-19,1,['23.100.60'],ISO/TC 131/SC 6,9599,,"[32951,30219]","['en','fr']",7,Contains recommendations to methods of cleaning hydraulic fluid power components and describes alternative procedures for assessing the cleanliness of the components as delivered by the manufacturer to a system constructor or user. Does not apply to complete systems or procedures for cleaning and assessing solid pipework.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10982:1998 - **Identifier:** ISO/TR 10982:1998 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 10982:2013 - **Withdrawn / published date:** 1998-03-19 _(verified: appears in the quote below)_ > 18951,TR,,ISO/TR 10982:1998,Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags,Véhicules routiers — Méthodes d'essai pour l'évaluation des interactions d'un occupant en position anormale dans un véhicule et des sacs gonflables en cours de déploiement,1998-03-19,1,['43.100'],ISO/TC 22,9599,,[63781],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 10993-9:1994 - **Identifier:** ISO/TR 10993-9:1994 _(verified: appears in the quote below)_ - **Item title:** Biological evaluation of medical devices — Part 9: Degradation of materials related to biological testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10993-9:1999 - **Withdrawn / published date:** 1994-07-14 _(verified: appears in the quote below)_ > 18970,TR,,ISO/TR 10993-9:1994,Biological evaluation of medical devices — Part 9: Degradation of materials related to biological testing,Évaluation biologique des dispositifs médicaux — Partie 9: Dégradation des matériaux relative à l'évaluation biologique,1994-07-14,1,['11.100'],ISO/TC 194,9599,,[26212],['en'],34, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11071-1:1990 - **Identifier:** ISO/TR 11071-1:1990 _(verified: appears in the quote below)_ - **Item title:** Comparison of worldwide lift safety standards — Part 1: Electric lifts (elevators) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 11071-1:2004 - **Withdrawn / published date:** 1990-11-15 _(verified: appears in the quote below)_ > 19057,TR,,ISO/TR 11071-1:1990,Comparison of worldwide lift safety standards — Part 1: Electric lifts (elevators),Comparaison des normes mondiales de sécurité des ascenseurs — Partie 1: Ascenseurs électriques,1990-11-15,1,['91.140.90'],ISO/TC 178,9599,,[40282],['en'],52,"This Technical Report consists of a comparison of the requirements of selected topics as covered by: CEN - EN81, Part 1 (1985); ASME - ASME/ANSI A17.1 (1987); USSR - NEDRA (1972); CMEA - (Elevator Safety Regulations).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11071-1:1990/Amd 1:1999 - **Identifier:** ISO/TR 11071-1:1990/Amd 1:1999 _(verified: appears in the quote below)_ - **Item title:** Comparison of worldwide lift safety standards — Part 1: Electric lifts (elevators) — Amendment 1: References to Japanese standards _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 11071-1:2004 - **Withdrawn / published date:** 1999-04-22 _(verified: appears in the quote below)_ > 25572,TR,Amd,ISO/TR 11071-1:1990/Amd 1:1999,Comparison of worldwide lift safety standards — Part 1: Electric lifts (elevators) — Amendment 1: References to Japanese standards,Comparaison des normes mondiales de sécurité des ascenseurs — Partie 1: Ascenseurs électriques — Amendement 1: Références aux normes japonaises,1999-04-22,1,['91.140.90'],ISO/TC 178,9599,,[40282],['en'],35, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11071-1:1990/Amd 2:2001 - **Identifier:** ISO/TR 11071-1:1990/Amd 2:2001 _(verified: appears in the quote below)_ - **Item title:** Comparison of worldwide lift safety standards — Part 1: Electric lifts (elevators) — Amendment 2: References to Australian standards _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 11071-1:2004 - **Withdrawn / published date:** 2001-07-19 _(verified: appears in the quote below)_ > 31442,TR,Amd,ISO/TR 11071-1:1990/Amd 2:2001,Comparison of worldwide lift safety standards — Part 1: Electric lifts (elevators) — Amendment 2: References to Australian standards,Comparaison des normes mondiales de sécurité des ascenseurs — Partie 1: Ascenseurs électriques — Amendement 2: Références aux normes australiennes,2001-07-19,1,['91.140.90'],ISO/TC 178,9599,,[40282],['en'],30, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11071-2:1996 - **Identifier:** ISO/TR 11071-2:1996 _(verified: appears in the quote below)_ - **Item title:** Comparison of worldwide lift safety standards — Part 2: Hydraulic lifts (elevators) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 11071-2:2006 - **Withdrawn / published date:** 1996-12-26 _(verified: appears in the quote below)_ > 19058,TR,,ISO/TR 11071-2:1996,Comparison of worldwide lift safety standards — Part 2: Hydraulic lifts (elevators),Comparaison des normes mondiales de sécurité des ascenseurs — Partie 2: Ascenseurs hydrauliques,1996-12-26,1,['91.140.90'],ISO/TC 178,9599,,[43499],['en'],57,"Contains a comparison of the requirements of selected topics as covered by the worldwide safety standards EN 81, Part 2, edition 1987) (BS 5655, Part 2:1988), ASME A17.1 (edition 1993) and CAN-B44 (edition 1994).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11071-2:1996/Amd 1:1999 - **Identifier:** ISO/TR 11071-2:1996/Amd 1:1999 _(verified: appears in the quote below)_ - **Item title:** Comparison of worldwide lift safety standards — Part 2: Hydraulic lifts (elevators) — Amendment 1: Reference to Japanese and Australian standards _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 11071-2:2006 - **Withdrawn / published date:** 1999-08-12 _(verified: appears in the quote below)_ > 31426,TR,Amd,ISO/TR 11071-2:1996/Amd 1:1999,Comparison of worldwide lift safety standards — Part 2: Hydraulic lifts (elevators) — Amendment 1: Reference to Japanese and Australian standards,Comparaison des normes mondiales de sécurité des ascenseurs — Partie 2: Ascenseurs hydrauliques — Amendement 1: Référence aux normes japonaises et australiennes,1999-08-12,1,['91.140.90'],ISO/TC 178,9599,,[43499],['en'],31, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11079:1993 - **Identifier:** ISO/TR 11079:1993 _(verified: appears in the quote below)_ - **Item title:** Evaluation of cold environments — Determination of required clothing insulation (IREQ) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11079:2007 | ISO/CD 11079 - **Withdrawn / published date:** 1993-12-02 _(verified: appears in the quote below)_ > 19067,TR,,ISO/TR 11079:1993,Evaluation of cold environments — Determination of required clothing insulation (IREQ),Évaluation des ambiances froides — Détermination de l'isolement requis des vêtements,1993-12-02,1,['13.180'],ISO/TC 159/SC 5,9599,,"[38900,34252]",['en'],31,"Proposes methods and strategies to assess the thermal stress associated with exposure to cold environments. Cold stress is suggested to be evaluated in terms of both general cooling of the body and local cooling of particular parts of the body (e.g. extremities and face). The methods apply to continuous, intermittent and occasional exposure and in both indoor and outdoor work. Specific effects associated with certain met Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11155-1:1994 - **Identifier:** ISO/TR 11155-1:1994 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Air filters for passenger compartments — Part 1: Test for particle filtration _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11155-1:2001 - **Withdrawn / published date:** 1994-06-02 _(verified: appears in the quote below)_ > 19165,TR,,ISO/TR 11155-1:1994,Road vehicles — Air filters for passenger compartments — Part 1: Test for particle filtration,Véhicules routiers — Filtres à air pour l'habitacle — Partie 1: Essai de filtrage des particules,1994-06-02,1,['43.040.60'],ISO/TC 22,9599,,[34308],"['en','fr']",14,"
Specifies assessment criteria in order to permit the selection and comparability of air filters and filter elements under laboratory conditions. Applies to air filters used in motor vehicles to remove dust particles from the external air or recirculated air for the passenger compartment. The tests provide information on pressure differences, the filtration rate and fractional filtration rate, as well as Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11211:1995 - **Identifier:** ISO/TR 11211:1995 _(verified: appears in the quote below)_ - **Item title:** Grading polished diamonds — Terminology and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/FDIS 11211-1 | ISO/FDIS 11211-2 - **Withdrawn / published date:** 1995-12-14 _(verified: appears in the quote below)_ > 19200,TR,,ISO/TR 11211:1995,Grading polished diamonds — Terminology and classification,Diamants taillés — Terminologie et classification,1995-12-14,1,"['01.040.39','39.060']",ISO/TC 174,9599,,"[31331,31332]","['en','fr']",15,"
Gives the terminology and classification to be used for grading and description of polished diamonds. Shall only be used for natural, unmounted, polished diamonds.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11255:1994 - **Identifier:** ISO/TR 11255:1994 _(verified: appears in the quote below)_ - **Item title:** Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 513:2004 - **Withdrawn / published date:** 1994-02-24 _(verified: appears in the quote below)_ > 19233,TR,,ISO/TR 11255:1994,Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation,Application des matériaux durs de coupe pour usinage par enlèvement de copeaux — Informations complémentaires à la désignation ISO 513,1994-02-24,1,['25.100.01'],ISO/TC 29/SC 9,9599,,[35207],"['en','fr']",8,"Establishes how to provide this information when additional information to the designation according to ISO 513 about workpiece materials to be machined, as well as toughness characteristics and performance data of the hard cutting material is considered to be useful.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11295:1992 - **Identifier:** ISO/TR 11295:1992 _(verified: appears in the quote below)_ - **Item title:** Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11295:2010 - **Withdrawn / published date:** 1992-08-06 _(verified: appears in the quote below)_ > 2411,TR,,ISO/TR 11295:1992,Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings,Techniques de réhabilitation des réseaux de canalisation au moyen de tubes et raccords plastiques,1992-08-06,1,['23.040.01'],ISO/TC 138,9599,,[41714],"['en','fr']",23,"Outlines methods of rehabilitation of non-pressure or pressure pipeline systems involving renovation of existing pipeline systems, using one of the optional lining techniques, or replacement of existing pipeline systems, using one of the optional trenchless techniques.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11330:1997 - **Identifier:** ISO/TR 11330:1997 _(verified: appears in the quote below)_ - **Item title:** Determination of volume of water and water level in lakes and reservoirs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 11330 - **Withdrawn / published date:** 1997-09-04 _(verified: appears in the quote below)_ > 19294,TR,,ISO/TR 11330:1997,Determination of volume of water and water level in lakes and reservoirs,Détermination du volume et du niveau d'eaux dans les lacs et réservoirs,1997-09-04,1,['17.120.20'],ISO/TC 113/SC 1,9599,,[42062],['en'],8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11364:2012 - **Identifier:** ISO/TR 11364:2012 _(verified: appears in the quote below)_ - **Item title:** Gas cylinders — Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 11364:2019 - **Withdrawn / published date:** 2012-11-30 _(verified: appears in the quote below)_ > 50450,TR,,ISO/TR 11364:2012,Gas cylinders — Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system,Bouteilles à gaz — Compilation des filetages nationaux et internationaux des queues de robinets/goulots debouteilles et leurs systèmes d'identification et de marquage,2012-11-30,1,['23.020.35'],ISO/TC 58,9599,,[70814],['en'],26,"ISO/TR 11364:2012 lists the different valve stem to gas cylinder connection threads currently and historically existing worldwide and provides official coded designations for them. These coded designations will then be available for identification and marking purposes.
It also gives guidance co Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11371:2013 - **Identifier:** ISO/TR 11371:2013 _(verified: appears in the quote below)_ - **Item title:** Pulps — Basic guidelines for laboratory refining _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11371:2023 - **Withdrawn / published date:** 2013-09-25 _(verified: appears in the quote below)_ > 50524,TR,,ISO/TR 11371:2013,Pulps — Basic guidelines for laboratory refining,Pâtes — Lignes directrices pour le raffinage de laboratoire,2013-09-25,1,['85.040'],ISO/TC 6,9599,,[84109],['en'],17,"
ISO/TR 11371:2013 gives guidelines for the laboratory refining of various pulps intended for paper production including unifying terms and parameters for the simulation of industrial refining processes and laboratory refiners; treating pulp samples in a (semi) continuous operation in contrast to quasi-stationary laboratory beating equipment such as the PFI mill or Valley Hollander; evaluation of chemical market pulps under close-to-reality conditions in terms of refining intensity and refining ene Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11405:1994 - **Identifier:** ISO/TR 11405:1994 _(verified: appears in the quote below)_ - **Item title:** Dental materials — Guidance on testing of adhesion to tooth structure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11405:2003 - **Withdrawn / published date:** 1994-12-15 _(verified: appears in the quote below)_ > 19347,TR,,ISO/TR 11405:1994,Dental materials — Guidance on testing of adhesion to tooth structure,Produits dentaires — Lignes directrices pour l'essai d'adhésion à la structure de la dent,1994-12-15,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[31486],"['en','fr']",14,"
Specifies test methods for evaluation of the adhesive bond between dental materials and tooth structure, i. e. enamel and dentine. Describes two bond strength measurement tests, tensile and shear, a test for measurement of marginal gaps around fillings, a microleakage test, and gives guidance on clinical usage tests for such materials.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11444:1995 - **Identifier:** ISO/TR 11444:1995 _(verified: appears in the quote below)_ - **Item title:** Quality of sawn wood used for the construction of pallets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 11444 - **Withdrawn / published date:** 1995-07-13 _(verified: appears in the quote below)_ > 19387,TR,,ISO/TR 11444:1995,Quality of sawn wood used for the construction of pallets,Qualité des bois utilisés pour la fabrication de palettes,1995-07-13,1,['55.180.20'],ISO/TC 51,9599,,[61910],"['en','fr']",7,Gives information on the faults and features which may affect sawn wood used for the construction of pallets and provides guidance on their effects in relation to the physical and mechanical properties of both components and complete wooden pallets.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/TR 11447:1994 - **Identifier:** ISO/TR 11447:1994 _(verified: appears in the quote below)_ - **Item title:** Small craft — Interchangeability dimensions of navigation lights _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD TR 11447 - **Withdrawn / published date:** 1994-10-20 _(verified: appears in the quote below)_ > 19390,TR,,ISO/TR 11447:1994,Small craft — Interchangeability dimensions of navigation lights,Navires de plaisance — Dimensions d'interchangeabilité des feux de navigation,1994-10-20,1,['47.080'],ISO/TC 188,9599,,[30881],"['en','fr']",6,Defines the parameters and threads of the attachment holes as well as the shape and relevant necessary dimensions of the connection points for navigation lights in order to ensure their interchangeability. Does not cover lights designed as an integral part of the craft.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 224](https://referencesource.org/iso-standard-supersessions/p/224/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 226](https://referencesource.org/iso-standard-supersessions/p/226/) Last verified: 2026-08-05. Review by: 2027-02-02.