ISO 11513:2011 specifies minimum requirements for the material, design, construction, workmanship, examination and testing at manufacture of refillable welded steel cyli Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11515:2013 - **Identifier:** ISO 11515:2013 _(verified: appears in the quote below)_ - **Item title:** Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11515:2022 - **Withdrawn / published date:** 2013-07-22 _(verified: appears in the quote below)_ > 50568,IS,,ISO 11515:2013,"Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing","Bouteilles à gaz — Bouteilles tubulaires en composite renforcé rechargeables d'une capacité de 450 L à 3000 L — Conception, construction et essais",2013-07-22,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[78506],['en'],41,"
ISO 11515:2013 specifies minimum requirements for the design, construction and performance testing of composite reinforced tubes between 450 l and 3 000 l water capacity, for transport, storage and use of compressed or liquefied gases with test pressures up to and including 1600 bar with a design life of at least 15 yea Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11515:2013/Amd 1:2018 - **Identifier:** ISO 11515:2013/Amd 1:2018 _(verified: appears in the quote below)_ - **Item title:** Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11515:2022 - **Withdrawn / published date:** 2018-09-05 _(verified: appears in the quote below)_ > 71920,IS,Amd,ISO 11515:2013/Amd 1:2018,"Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing — Amendment 1","Bouteilles à gaz — Bouteilles tubulaires en composite renforcé rechargeables d'une capacité de 450 L à 3000 L — Conception, construction et essais — Amendement 1",2018-09-05,1,['23.020.30'],ISO/TC 58/SC 3,9599,,[78506],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11519-2:1994 - **Identifier:** ISO 11519-2:1994 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Low-speed serial data communication — Part 2: Low-speed controller area network (CAN) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11898-3:2006 - **Withdrawn / published date:** 1994-06-09 _(verified: appears in the quote below)_ > 19470,IS,,ISO 11519-2:1994,Road vehicles — Low-speed serial data communication — Part 2: Low-speed controller area network (CAN),Véhicules routiers — Communication en série de données à basse vitesse — Partie 2: Réseau local à commande à basse vitesse (CAN),1994-06-09,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[36055],['en'],52,"
Specifies the data link layer and the physical layer of the CAN, a communications network up to 125 kbit/s, for road vehicle application. The low-speed CAN is a serial communication protocol supporting distributed real-time control and multiplexing. Defines the general architecture of the network in terms of the hierarchical layers defined in the ISO-OSI model accordin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11519-2:1994/Amd 1:1995 - **Identifier:** ISO 11519-2:1994/Amd 1:1995 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Low-speed serial data communication — Part 2: Low-speed controller area network (CAN) — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11898-3:2006 - **Withdrawn / published date:** 1995-04-06 _(verified: appears in the quote below)_ > 22393,IS,Amd,ISO 11519-2:1994/Amd 1:1995,Road vehicles — Low-speed serial data communication — Part 2: Low-speed controller area network (CAN) — Amendment 1,Véhicules routiers — Communication en série de données à basse vitesse — Partie 2: Réseau local à commande à basse vitesse (CAN) — Amendement 1,1995-04-06,1,['43.040.15'],ISO/TC 22,9599,,[36055],['en'],9,"
Inserts a new page v and a new introduction. Replaces, adds and amends text on pages 10 to 19, 21 to 24 and 28.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1152:1974 - **Identifier:** ISO 1152:1974 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 1152-1974 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1151-2:1985 - **Withdrawn / published date:** 1974-12-01 _(verified: appears in the quote below)_ > 5720,IS,,ISO 1152:1974,Withdrawal of ISO 1152-1974,Annulation de l'ISO 1152-1974,1974-12-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5703],['en'],5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11521:1996 - **Identifier:** ISO 11521:1996 _(verified: appears in the quote below)_ - **Item title:** Securities — Scheme for interdepository message types _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 7775:1997 | ISO 15022-2:1999 | ISO 15022-1:1999 - **Withdrawn / published date:** 1996-05-16 _(verified: appears in the quote below)_ > 19475,IS,,ISO 11521:1996,Securities — Scheme for interdepository message types,Valeurs mobilières — Structure des messages type interdépositaires,1996-05-16,1,['03.060'],ISO/TC 68,9599,,"[27999,28373,25775]","['en','fr']",31, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11525-1:2012 - **Identifier:** ISO 11525-1:2012 _(verified: appears in the quote below)_ - **Item title:** Rough-terrain trucks - User requirements — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11525-1:2020 - **Withdrawn / published date:** 2012-06-22 _(verified: appears in the quote below)_ > 50581,IS,,ISO 11525-1:2012,Rough-terrain trucks - User requirements — Part 1: General requirements,Chariots tout-terrain - Exigences pour l'utilisateur — Partie 1: Exigences générales,2012-06-22,1,['53.060'],ISO/TC 110/SC 4,9599,,[74620],['en'],14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11525-2:2015 - **Identifier:** ISO 11525-2:2015 _(verified: appears in the quote below)_ - **Item title:** Rough-terrain trucks — User requirements — Part 2: Slewing variable-reach trucks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11525-2:2020 - **Withdrawn / published date:** 2015-10-19 _(verified: appears in the quote below)_ > 60661,IS,,ISO 11525-2:2015,Rough-terrain trucks — User requirements — Part 2: Slewing variable-reach trucks,Chariots tout-terrain — Exigences pour l'utilisateur — Partie 2: Chariots rotatifs à portée variable,2015-10-19,1,['53.060'],ISO/TC 110/SC 4,9599,,[74403],['en'],17,"ISO 11525-2:2015 gives specific requirements relating to the use of slewing variable-reach rough-terrain trucks (hereafter referred to as trucks), as defined in ISO 10896‑2.
It is intended to achieve the following:
a) the prevention of personal injuries, property damage and accidents;
b) the establishment of criteria for inspection, maintenance, operation and training.
For general user requir Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11527:2010 - **Identifier:** ISO 11527:2010 _(verified: appears in the quote below)_ - **Item title:** Building construction — Sealants — Test method for the determination of stringiness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11527:2018 - **Withdrawn / published date:** 2010-11-11 _(verified: appears in the quote below)_ > 50585,IS,,ISO 11527:2010,Building construction — Sealants — Test method for the determination of stringiness,Construction immobilière — Mastics — Méthode d'essai pour la détermination du pouvoir filant,2010-11-11,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[71900],"['en','fr']",3,
ISO 11527:2010 specifies a method for the determination of the stringiness of a wet-applied sealant.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11529-1:1998 - **Identifier:** ISO 11529-1:1998 _(verified: appears in the quote below)_ - **Item title:** Milling cutters — Designation — Part 1: Shank type end mills of solid or tipped design _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11529-1:2005 - **Withdrawn / published date:** 1998-04-09 _(verified: appears in the quote below)_ > 27101,IS,,ISO 11529-1:1998,Milling cutters — Designation — Part 1: Shank type end mills of solid or tipped design,"Fraises — Désignation — Partie 1: Fraises deux tailles, à queue monobloc ou à lames",1998-04-09,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[41441],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11529-1:2005 - **Identifier:** ISO 11529-1:2005 _(verified: appears in the quote below)_ - **Item title:** Milling cutters — Designation — Part 1: Shank-type end mills of solid or tipped design _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11529:2013 - **Withdrawn / published date:** 2005-03-23 _(verified: appears in the quote below)_ > 41441,IS,,ISO 11529-1:2005,Milling cutters — Designation — Part 1: Shank-type end mills of solid or tipped design,"Fraises — Désignation — Partie 1: Fraises deux tailles, à queue monobloc ou à lames",2005-03-23,2,['25.100.20'],ISO/TC 29/SC 9,9599,"[27101,38299]",[60102],"['en','fr','ru']",8,"ISO 11529-1:2005 establishes a designation system for shank-type end mills of solid or tipped design with a maximum diameter of 99,9 mm, with the purpose of simplifying communication between the users and suppliers of such tools.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11529-2:1998 - **Identifier:** ISO 11529-2:1998 _(verified: appears in the quote below)_ - **Item title:** Milling cutters — Designation — Part 2: Shank type and bore type milling cutters with indexable inserts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11529-2:2005 - **Withdrawn / published date:** 1998-04-16 _(verified: appears in the quote below)_ > 27102,IS,,ISO 11529-2:1998,Milling cutters — Designation — Part 2: Shank type and bore type milling cutters with indexable inserts,Fraises — Désignation — Partie 2: Fraises à queue et fraises à trou à plaquettes amovibles,1998-04-16,1,['25.100.20'],ISO/TC 29/SC 9,9599,"[14135,14769]",[41442],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11529-2:2005 - **Identifier:** ISO 11529-2:2005 _(verified: appears in the quote below)_ - **Item title:** Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11529:2013 - **Withdrawn / published date:** 2005-03-23 _(verified: appears in the quote below)_ > 41442,IS,,ISO 11529-2:2005,Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts,Fraises — Désignation — Partie 2: Fraises à queue et fraises à trou à plaquettes amovibles,2005-03-23,2,['25.100.20'],ISO/TC 29/SC 9,9599,"[27102,38300]",[60102],"['en','fr','ru']",10,"ISO 11529-2:2005 establishes a designation system for shank- and bore-type milling cutters embodying hard-material, indexable inserts, with the purpose of simplifying communication between the users and suppliers of such tools.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1153:1972 - **Identifier:** ISO 1153:1972 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 1153-1972 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1151-3:1989 - **Withdrawn / published date:** 1972-12-01 _(verified: appears in the quote below)_ > 5721,IS,,ISO 1153:1972,Withdrawal of ISO 1153-1972,Annulation de l'ISO 1153-1972,1972-12-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5707],['en'],10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11531:1994 - **Identifier:** ISO 11531:1994 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Earing test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11531:2015 - **Withdrawn / published date:** 1994-04-07 _(verified: appears in the quote below)_ > 19485,IS,,ISO 11531:1994,Metallic materials — Earing test,Matériaux métalliques — Essai de corne,1994-04-07,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[62977],"['en','fr']",4,"Specifies a method for determining the ear height of metal sheet and strip of nominal thickness from 0,1 mm to 3 mm after deep drawing by measuring the height of any earing with an accuracy of ± 0,05 mm.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11531:2015 - **Identifier:** ISO 11531:2015 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Sheet and strip — Earing test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11531:2022 - **Withdrawn / published date:** 2015-11-06 _(verified: appears in the quote below)_ > 62977,IS,,ISO 11531:2015,Metallic materials — Sheet and strip — Earing test,Matériaux métalliques — Tôles et bandes — Essai de corne,2015-11-06,2,['77.040.10'],ISO/TC 164/SC 2,9599,[19485],[83844],['en'],5,"ISO 11531:2015 specifies a method for determining the ear height of metal sheet and strip of nominal thickness from 0,1 mm to 3 mm after deep drawing.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11532:2012 - **Identifier:** ISO 11532:2012 _(verified: appears in the quote below)_ - **Item title:** Aircraft ground equipment — Graphical symbols _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11532:2018 - **Withdrawn / published date:** 2012-11-05 _(verified: appears in the quote below)_ > 40066,IS,,ISO 11532:2012,Aircraft ground equipment — Graphical symbols,Matériel au sol pour aéronefs — Symboles graphiques,2012-11-05,1,"['49.100','01.080.20']",ISO/TC 20/SC 9,9599,,[70671],"['en','fr']",39,"ISO 11532:2012 establishes common graphical symbols for use on all types of aircraft ground support equipment. They have been compiled for the benefit of those who deal with such equipment, such as airlines, airport handling agencies, airport authorities, manufacturers, etc., in order to facilitate fast and accurate identification of controls, indicators and decals of powered and unpowered equipment.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11533:1996 - **Identifier:** ISO 11533:1996 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of cobalt content — Flame atomic absorption spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11533:2009 - **Withdrawn / published date:** 1996-03-28 _(verified: appears in the quote below)_ > 19487,IS,,ISO 11533:1996,Iron ores — Determination of cobalt content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du cobalt — Méthode par spectrométrie d'absorption atomique dans la flamme,1996-03-28,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[45795],"['en','fr']",9,"Specifies a flame atomic absorption spectrometric method for the determination of the cobalt content of iron ores. This method is applicable to a concentration range of 0,000 6 % (m/m) to 0,070 0 % (m/m) of cobalt in natural iron ores, iron ore concentrates and agglomerates, including sinter products.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11534:1998 - **Identifier:** ISO 11534:1998 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of tin content — Flame atomic absorption spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11534:2006 - **Withdrawn / published date:** 1998-05-14 _(verified: appears in the quote below)_ > 19488,IS,,ISO 11534:1998,Iron ores — Determination of tin content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage de l'étain — Méthode par spectrométrie d'absorption atomique dans la flamme,1998-05-14,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[43943],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11535:1998 - **Identifier:** ISO 11535:1998 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of various elements — Inductively coupled plasma atomic emission spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11535:2006 - **Withdrawn / published date:** 1998-09-24 _(verified: appears in the quote below)_ > 19489,IS,,ISO 11535:1998,Iron ores — Determination of various elements — Inductively coupled plasma atomic emission spectrometric method,Minerais de fer — Dosage de divers éléments — Méthode par spectrométrie d'émission atomique avec plasma induit par haute fréquence,1998-09-24,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[43944],"['en','fr']",22, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11539:1999 - **Identifier:** ISO 11539:1999 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Contact lenses — Classification of contact lenses and contact lens materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 18369-1:2006 - **Withdrawn / published date:** 1999-08-19 _(verified: appears in the quote below)_ > 19493,IS,,ISO 11539:1999,Ophthalmic optics — Contact lenses — Classification of contact lenses and contact lens materials,Optique ophtalmique — Lentilles de contact — Classification des lentilles de contact et de leurs matériaux constitutifs,1999-08-19,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[33429],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11540:1993 - **Identifier:** ISO 11540:1993 _(verified: appears in the quote below)_ - **Item title:** Caps for writing and marking instruments intended for use by children up to 14 years of age — Safety requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 11540-2 | ISO 11540:2014 - **Withdrawn / published date:** 1993-08-26 _(verified: appears in the quote below)_ > 19494,IS,,ISO 11540:1993,Caps for writing and marking instruments intended for use by children up to 14 years of age — Safety requirements,Capuchons d'instruments pour l'écriture et le marquage destinés à être utilisés par des enfants jusqu'à 14 ans inclus — Exigences de sécurité,1993-08-26,1,"['97.190','97.180']",ISO/TC 10,9599,,"[56729,56728]","['en','fr']",4,"Specifies safety requirements for cap size, ventilated caps (vent area, air flow) and marking. Annex A describes the test for air flow. Caps which do not comply should have the instrument or its packaging labelled with a warning as to the dangers of asphyxiation from pen caps.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11540:2014 - **Identifier:** ISO 11540:2014 _(verified: appears in the quote below)_ - **Item title:** Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11540:2021 - **Withdrawn / published date:** 2014-03-04 _(verified: appears in the quote below)_ > 56728,IS,,ISO 11540:2014,Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation,Instruments pour l'écriture et le marquage — Spécifications pour les capuchons afin de réduire le risque d'asphyxie,2014-03-04,2,"['97.190','97.180']",ISO/TC 10,9599,[19494],[81889],['en'],7,"ISO 11540:2014 specifies requirements to reduce the risk of asphyxiation from caps for writing and marking instruments. It relates to such instruments which in normal or foreseeable circumstances are likely to be used by children up to the age of 14 years.
ISO 11540:2014 is not applicable to the following: writing and marking instruments which are designed or only intended for us Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11542-1:1994 - **Identifier:** ISO 11542-1:1994 _(verified: appears in the quote below)_ - **Item title:** Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11542-1:2001 - **Withdrawn / published date:** 1994-11-24 _(verified: appears in the quote below)_ > 19496,IS,,ISO 11542-1:1994,Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de polyéthylène à ultra-haute masse moléculaire (PE-UHMW) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1994-11-24,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[30102],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11542-1:1994/Amd 1:1996 - **Identifier:** ISO 11542-1:1994/Amd 1:1996 _(verified: appears in the quote below)_ - **Item title:** Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11542-1:2001 - **Withdrawn / published date:** 1996-12-12 _(verified: appears in the quote below)_ > 25643,IS,Amd,ISO 11542-1:1994/Amd 1:1996,Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications — Amendment 1,Plastiques — Matériaux à base de polyéthylène à ultra-haute masse moléculaire (PE-UHMW) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification — Amendement 1,1996-12-12,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[30102],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11542-1:2001 - **Identifier:** ISO 11542-1:2001 _(verified: appears in the quote below)_ - **Item title:** Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 11542-1 | ISO 21304-1:2019 - **Withdrawn / published date:** 2001-02-08 _(verified: appears in the quote below)_ > 30102,IS,,ISO 11542-1:2001,Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion — Partie 1: Système de désignation et base de spécifications,2001-02-08,2,['83.080.20'],ISO/TC 61/SC 9,9599,"[19496,25643]","[45067,70506]","['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11542-2:1998 - **Identifier:** ISO 11542-2:1998 _(verified: appears in the quote below)_ - **Item title:** Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21304-2:2021 - **Withdrawn / published date:** 1998-11-19 _(verified: appears in the quote below)_ > 21108,IS,,ISO 11542-2:1998,Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1998-11-19,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[77189],"['en','fr']",14,"
This part of ISO 11542 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PE-UHMW moulding and extrusion materials. Requirements for handling test material and for conditionin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11542-2:1998/Cor 1:2007 - **Identifier:** ISO 11542-2:1998/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21304-2:2021 - **Withdrawn / published date:** 2007-06-14 _(verified: appears in the quote below)_ > 46331,IS,Cor,ISO 11542-2:1998/Cor 1:2007,Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Technical Corrigendum 1,Plastiques — Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés — Rectificatif technique 1,2007-06-14,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[77189],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11545:1995 - **Identifier:** ISO 11545:1995 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles — Determination of uniformity of water distribution _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11545:2001 - **Withdrawn / published date:** 1995-01-19 _(verified: appears in the quote below)_ > 19499,IS,,ISO 11545:1995,Agricultural irrigation equipment — Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles — Determination of uniformity of water distribution,Matériel agricole d'irrigation — Pivots et rampes frontales équipés de buses d'arrosage ou d'asperseurs — Méthode de détermination de l'uniformité de la distribution d'eau,1995-01-19,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[26518],"['en','fr']",11,"
Specifies a method of measuring uniformity of water distribution in the field for the machines (not equipped with various corner application devices). The method of computing the coefficient of uniformity from the data produced is also laid down. Appl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11545:2001 - **Identifier:** ISO 11545:2001 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles — Determination of uniformity of water distribution _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11545:2009 - **Withdrawn / published date:** 2001-08-02 _(verified: appears in the quote below)_ > 26518,IS,,ISO 11545:2001,Agricultural irrigation equipment — Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles — Determination of uniformity of water distribution,Matériel agricole d'irrigation — Pivots et rampes frontales équipés de buses d'arrosage ou d'asperseurs — Méthode de détermination de l'uniformité de la distribution d'eau,2001-08-02,2,['65.060.35'],ISO/TC 23/SC 18,9599,[19499],[45543],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11551:1997 - **Identifier:** ISO 11551:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Lasers and laser-related equipment — Test method for absorptance of optical laser components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11551:2003 - **Withdrawn / published date:** 1997-07-10 _(verified: appears in the quote below)_ > 19505,IS,,ISO 11551:1997,Optics and optical instruments — Lasers and laser-related equipment — Test method for absorptance of optical laser components,Optique et instruments d'optique — Lasers et équipements associés aux lasers — Méthode d'essai du facteur d'absorption des composants optiques pour lasers,1997-07-10,1,['31.260'],ISO/TC 172/SC 9,9599,,[32097],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11551:2003 - **Identifier:** ISO 11551:2003 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Lasers and laser-related equipment — Test method for absorptance of optical laser components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 11551 | ISO 11551:2019 - **Withdrawn / published date:** 2003-11-24 _(verified: appears in the quote below)_ > 32097,IS,,ISO 11551:2003,Optics and optical instruments — Lasers and laser-related equipment — Test method for absorptance of optical laser components,Optique et instruments d'optique — Lasers et équipements associés aux lasers — Méthode d'essai du facteur d'absorption des composants optiques pour lasers,2003-11-24,2,['31.260'],ISO/TC 172/SC 9,9599,[19505],"[52956,69228]","['en','fr']",13,
ISO 11551:2003 specifies procedures and techniques for obtaining comparable values for the absorptance of optical laser components.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11553-1:2005 - **Identifier:** ISO 11553-1:2005 _(verified: appears in the quote below)_ - **Item title:** Safety of machinery — Laser processing machines — Part 1: General safety requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11553-1:2020 - **Withdrawn / published date:** 2005-01-26 _(verified: appears in the quote below)_ > 30654,IS,,ISO 11553-1:2005,Safety of machinery — Laser processing machines — Part 1: General safety requirements,Sécurité des machines — Machines à laser — Partie 1: Prescriptions générales de sécurité,2005-01-26,1,"['31.260','13.110']",ISO/TC 172/SC 9,9599,[19507],[67658],"['en','fr']",16,"ISO 11553-1:2005 describes hazards generated by laser processing machines, and specifies the safety requirements relating to radiation hazards and hazards generated by materials and substances. It also specifies the information to be supplied by the manufacturers of such equipment.
Requirements dealing with noise as a hazard from laser processing machines are not included in ISO 11553-1:2005. The Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11553:1996 - **Identifier:** ISO 11553:1996 _(verified: appears in the quote below)_ - **Item title:** Safety of machinery — Laser processing machines — Safety requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11553-1:2005 - **Withdrawn / published date:** 1996-08-29 _(verified: appears in the quote below)_ > 19507,IS,,ISO 11553:1996,Safety of machinery — Laser processing machines — Safety requirements,Sécurité des machines — Machines à laser — Prescriptions de sécurité,1996-08-29,1,['31.260'],ISO/TC 172/SC 9,9599,,[30654],"['en','fr']",12,
Describes hazards generated by laser processing machines and specifies the safety requirements to avoid hazards caused by radiation.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11554:1998 - **Identifier:** ISO 11554:1998 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11554:2003 - **Withdrawn / published date:** 1998-12-17 _(verified: appears in the quote below)_ > 19508,IS,,ISO 11554:1998,"Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics",Optique et instruments d'optique — Lasers et équipements associés aux lasers — Méthodes d'essai de la puissance et l'énergie des faisceaux lasers et de leurs caractéristiques temporelles,1998-12-17,1,['31.260'],ISO/TC 172/SC 9,9599,,[31691],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11554:2003 - **Identifier:** ISO 11554:2003 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11554:2006 - **Withdrawn / published date:** 2003-04-17 _(verified: appears in the quote below)_ > 31691,IS,,ISO 11554:2003,"Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics",Optique et instruments d'optique — Lasers et équipements associés aux lasers — Méthodes d'essai de la puissance et de l'énergie des faisceaux lasers et de leurs caractéristiques temporelles,2003-04-17,2,['31.260'],ISO/TC 172/SC 9,9599,[19508],[40917],"['en','fr']",15,"ISO 11554:2003 specifies test methods for determining the power and energy of continuous-wave and pulsed laser beams, as well as their temporal characteristics of pulse shape, pulse duration and pulse repetition rate. Test and evaluation methods are also given Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11554:2006 - **Identifier:** ISO 11554:2006 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11554:2017 - **Withdrawn / published date:** 2006-05-04 _(verified: appears in the quote below)_ > 40917,IS,,ISO 11554:2006,"Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics",Optique et photonique — Lasers et équipements associés aux lasers — Méthodes d'essai de la puissance et de l'énergie des faisceaux lasers et de leurs caractéristiques temporelles,2006-05-04,3,['31.260'],ISO/TC 172/SC 9,9599,[31691],[69232],"['en','fr']",18,"
ISO 11554:2006 specifies test methods for determining the power and energy of continuous-wave and pulsed laser beams, as well as their temporal characteristics of pulse shape, pulse duration and pulse repetition rate. Test and evaluation methods are also given for the power stabil Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11554:2017 - **Identifier:** ISO 11554:2017 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11554:2025 - **Withdrawn / published date:** 2017-08-07 _(verified: appears in the quote below)_ > 69232,IS,,ISO 11554:2017,"Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics",Optique et photonique — Lasers et équipements associés aux lasers — Méthodes d'essai de la puissance et de l'énergie des faisceaux lasers et de leurs caractéristiques temporelles,2017-08-07,4,['31.260'],ISO/TC 172/SC 9,9599,[40917],[85866],"['en','fr']",18,"
ISO 11554:2017 specifies test methods for determining the power and energy of continuous wave and pulsed laser beams, as well as their temporal characteristics of pulse shape, pulse duration and pulse repetition rate. Test and evaluation methods are also given for the power stabil Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11556:1998 - **Identifier:** ISO 11556:1998 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of curl using a single vertically suspended test piece _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11556:2005 - **Withdrawn / published date:** 1998-06-18 _(verified: appears in the quote below)_ > 19510,IS,,ISO 11556:1998,Paper and board — Determination of curl using a single vertically suspended test piece,Papier et carton — Détermination du tuilage au moyen d'une éprouvette unique suspendue verticalement,1998-06-18,1,['85.060'],ISO/TC 6/SC 2,9599,,[41346],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11556:1998/Cor 1:2003 - **Identifier:** ISO 11556:1998/Cor 1:2003 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of curl using a single vertically suspended test piece — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11556:2005 - **Withdrawn / published date:** 2003-04-03 _(verified: appears in the quote below)_ > 38377,IS,Cor,ISO 11556:1998/Cor 1:2003,Paper and board — Determination of curl using a single vertically suspended test piece — Technical Corrigendum 1,Papier et carton — Détermination du tuilage au moyen d'une éprouvette unique suspendue verticalement — Rectificatif technique 1,2003-04-03,1,['85.060'],ISO/TC 6/SC 2,9599,,[41346],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11562:1996 - **Identifier:** ISO 11562:1996 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 11562 | ISO 16610-21:2011 - **Withdrawn / published date:** 1996-12-05 _(verified: appears in the quote below)_ > 21977,IS,,ISO 11562:1996,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Caractéristiques métrologiques des filtres à phase correcte,1996-12-05,1,['17.040.20'],ISO/TC 213,9599,,"[39922,50176]","['en','fr']",8,
Describes the metrological characteristics of phase correct filters for the measurement of surface profiles. In particular it specifies how to separate the long and short wave content of a surface profile.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11562:1996/Cor 1:1998 - **Identifier:** ISO 11562:1996/Cor 1:1998 _(verified: appears in the quote below)_ - **Item title:** Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 11562 | ISO 16610-21:2011 - **Withdrawn / published date:** 1998-06-04 _(verified: appears in the quote below)_ > 29876,IS,Cor,ISO 11562:1996/Cor 1:1998,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Caractéristiques métrologiques des filtres à phase correcte — Rectificatif technique 1,1998-06-04,1,['17.040.20'],ISO/TC 213,9599,,"[39922,50176]",['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11565:1998 - **Identifier:** ISO 11565:1998 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Spark-plugs — Test methods and requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11565:2006 - **Withdrawn / published date:** 1998-09-24 _(verified: appears in the quote below)_ > 19517,IS,,ISO 11565:1998,Road vehicles — Spark-plugs — Test methods and requirements,Vehicules routiers — Bougies d'allumage — Méthodes d'essai et exigences,1998-09-24,1,['43.060.50'],ISO/TC 22,9599,,[35092],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11565:2006 - **Identifier:** ISO 11565:2006 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Spark-plugs — Test methods and requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 11565 | ISO 11565:2024 | ISO/NP 11565-2 - **Withdrawn / published date:** 2006-12-15 _(verified: appears in the quote below)_ > 35092,IS,,ISO 11565:2006,Road vehicles — Spark-plugs — Test methods and requirements,Véhicules routiers — Bougies d'allumage — Méthodes d'essai et exigences,2006-12-15,2,['43.060.50'],ISO/TC 22/SC 32,9599,[19517],"[71944,83183,71945]","['en','fr']",10,ISO 11565:2006 specifies the test methods and requirements for the mechanical and electrical performance of spark-plugs for use with spark ignition engines.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11565:2006/Cor 1:2007 - **Identifier:** ISO 11565:2006/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Spark-plugs — Test methods and requirements — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 11565 | ISO 11565:2024 | ISO/NP 11565-2 - **Withdrawn / published date:** 2007-09-10 _(verified: appears in the quote below)_ > 50036,IS,Cor,ISO 11565:2006/Cor 1:2007,Road vehicles — Spark-plugs — Test methods and requirements — Technical Corrigendum 1,Véhicules routiers — Bougies d'allumage — Méthodes d'essai et exigences — Rectificatif technique 1,2007-09-10,2,['43.060.50'],ISO/TC 22/SC 32,9599,,"[71944,83183,71945]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11567:1995 - **Identifier:** ISO 11567:1995 _(verified: appears in the quote below)_ - **Item title:** Carbon fibre — Determination of filament diameter and cross-sectional area _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11567:2018 - **Withdrawn / published date:** 1995-12-21 _(verified: appears in the quote below)_ > 19519,IS,,ISO 11567:1995,Carbon fibre — Determination of filament diameter and cross-sectional area,Fibres de carbone — Détermination du diamètre et de l'aire de la section transversale des filaments,1995-12-21,1,['59.100.20'],ISO/TC 61/SC 13,9599,,[70573],"['en','fr']",6,Specifies four test methods for the determination of the diameter and cross-sectional area of single carbon fibres. The shape of the cross-section of the filaments from different suppliers may vary significantly. The term 'diameter' used herein applies to all cases from a diameter where the filament is exactly circular in cross-section.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-1:1994 - **Identifier:** ISO 11568-1:1994 _(verified: appears in the quote below)_ - **Item title:** Banking — Key management (retail) — Part 1: Introduction to key management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11568-1:2005 - **Withdrawn / published date:** 1994-11-24 _(verified: appears in the quote below)_ > 19520,IS,,ISO 11568-1:1994,Banking — Key management (retail) — Part 1: Introduction to key management,Banque — Gestion de clés (services aux particuliers) — Partie 1: Introduction à la gestion de clés,1994-11-24,1,['35.240.40'],ISO/TC 68/SC 2,9599,,[34937],"['en','fr']",11,"Specifies the principles for the management of keys used in cipher systems implemented within the retail banking environment. Applies both to the keys of symmetric cipher systems and to the secret and public keys of asymmetric cipher systems. Appropriate for use by financial institutions and other organizations engaged in the area of retail financial services, where the interchange of information requires confidentiali Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-1:2005 - **Identifier:** ISO 11568-1:2005 _(verified: appears in the quote below)_ - **Item title:** Banking — Key management (retail) — Part 1: Principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11568:2023 - **Withdrawn / published date:** 2005-06-17 _(verified: appears in the quote below)_ > 34937,IS,,ISO 11568-1:2005,Banking — Key management (retail) — Part 1: Principles,Banque — Gestion de clés (services aux particuliers) — Partie 1: Principes,2005-06-17,2,['35.240.40'],ISO/TC 68/SC 2,9599,[19520],[73993],['en'],16,"
ISO 11568-1:2005 specifies the principles for the management of keys used in cryptosystems implemented within the retail-banking environment. The retail-banking environment includes the interface between a card accepting device and an acquirer, an acquirer and a card issuer, an ICC and a card-accepting device.
An example of this environment and threats associated with the implementation of ISO 11568-1:2005 in the retail-banking environment are also descri Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-2:1994 - **Identifier:** ISO 11568-2:1994 _(verified: appears in the quote below)_ - **Item title:** Banking — Key management (retail) — Part 2: Key management techniques for symmetric ciphers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11568-2:2005 - **Withdrawn / published date:** 1994-11-24 _(verified: appears in the quote below)_ > 19522,IS,,ISO 11568-2:1994,Banking — Key management (retail) — Part 2: Key management techniques for symmetric ciphers,Banque — Gestion de clés (services aux particuliers) — Partie 2: Techniques de gestion de clés pour les algorithmes cryptographiques symétriques,1994-11-24,1,['35.240.40'],ISO/TC 68/SC 2,9599,,[39669],"['en','fr']",16,
Specifies techniques for the protection of the cryptographic keys for symmetric siphers used in a retail banking environment. Applicable to any organisation which is responsible for implementing procedures for the protection of keys during the life cycle. Gives in annex B algorithms approved for use with the techniques described herein.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-2:2005 - **Identifier:** ISO 11568-2:2005 _(verified: appears in the quote below)_ - **Item title:** Banking — Key management (retail) — Part 2: Symmetric ciphers, their key management and life cycle _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11568-2:2012 - **Withdrawn / published date:** 2005-09-23 _(verified: appears in the quote below)_ > 39669,IS,,ISO 11568-2:2005,"Banking — Key management (retail) — Part 2: Symmetric ciphers, their key management and life cycle","Banque — Gestion de clés (services aux particuliers) — Partie 2: Algorithmes cryptographiques symétriques, leur gestion de clés et leur cycle de vie",2005-09-23,2,['35.240.40'],ISO/TC 68/SC 2,9599,"[19522,19523]",[53568],['en'],29,ISO 11568-2:2005 specifies techniques for the protection of symmetric and asymmetric cryptographic keys in a retail banking environment using symmetric ciphers and the life-cycle management of the associated symmetric keys. The techniques described enable compliance with the principles described in ISO 11568-1.
The techniques des Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-2:2012 - **Identifier:** ISO 11568-2:2012 _(verified: appears in the quote below)_ - **Item title:** Financial services — Key management (retail) — Part 2: Symmetric ciphers, their key management and life cycle _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11568:2023 - **Withdrawn / published date:** 2012-01-23 _(verified: appears in the quote below)_ > 53568,IS,,ISO 11568-2:2012,"Financial services — Key management (retail) — Part 2: Symmetric ciphers, their key management and life cycle","Services financiers — Gestion de clés (services aux particuliers) — Partie 2: Algorithmes cryptographiques symétriques, leur gestion de clés et leur cycle de vie",2012-01-23,3,['35.240.40'],ISO/TC 68/SC 2,9599,[39669],[73993],['en'],29,
1 Scope
This part of ISO 11568 specifies techniques for the protection of symmetric and asymmetric cryptographic keys in a retail banking environment using symmetric ciphers and the life-cycle management of the associated symmetric keys. The techniques described enable compliance with the principles described in I Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-3:1994 - **Identifier:** ISO 11568-3:1994 _(verified: appears in the quote below)_ - **Item title:** Banking — Key management (retail) — Part 3: Key life cycle for symmetric ciphers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 11568-3 | ISO 11568-2:2005 - **Withdrawn / published date:** 1994-11-24 _(verified: appears in the quote below)_ > 19523,IS,,ISO 11568-3:1994,Banking — Key management (retail) — Part 3: Key life cycle for symmetric ciphers,Banque — Gestion de clés (services aux particuliers) — Partie 3: Cycle de vie des clés pour les algorithmes cryptographiques symétriques,1994-11-24,1,['35.240.40'],ISO/TC 68/SC 2,9599,,"[39670,39669]","['en','fr']",8,
Specifies for the retail banking environment the security requirements and the implementation methods for each step in the key life cycle. Applicable to any organisation that is responsible for the protection of keys used in a symmetric sipher. Applicable to institutions responsible for implementing techniques for the management of keys used to protect data in bank card Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-4:1998 - **Identifier:** ISO 11568-4:1998 _(verified: appears in the quote below)_ - **Item title:** Banking — Key management (retail) — Part 4: Key management techniques using public key cryptosystems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11568-4:2007 - **Withdrawn / published date:** 1998-07-09 _(verified: appears in the quote below)_ > 20743,IS,,ISO 11568-4:1998,Banking — Key management (retail) — Part 4: Key management techniques using public key cryptosystems,Banque — Gestion de clés (services aux particuliers) — Partie 4: Techniques de gestion de clés utilisant la cryptographie à clé publique,1998-07-09,1,['35.240.40'],ISO/TC 68/SC 2,9599,,[39666],"['en','fr']",26, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-4:2007 - **Identifier:** ISO 11568-4:2007 _(verified: appears in the quote below)_ - **Item title:** Banking — Key management (retail) — Part 4: Asymmetric cryptosystems — Key management and life cycle _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11568:2023 - **Withdrawn / published date:** 2007-06-21 _(verified: appears in the quote below)_ > 39666,IS,,ISO 11568-4:2007,Banking — Key management (retail) — Part 4: Asymmetric cryptosystems — Key management and life cycle,Banque — Gestion de clés (services aux particuliers) — Partie 4: Cryptosystèmes asymétriques — Gestion des clés et cycle de vie,2007-06-21,2,['35.240.40'],ISO/TC 68/SC 2,9599,"[20744,20743]",[73993],['en'],22,"
ISO 11568-4:2007 specifies techniques for the protection of symmetric and asymmetric cryptographic keys in a retail financial services environment using asymmetric cryptosystems and the life-cycle management of the associated asymmetric keys. The techniques described in this part of ISO 11568 enable compliance with the principles described in ISO 11568-1. F Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11568-5:1998 - **Identifier:** ISO 11568-5:1998 _(verified: appears in the quote below)_ - **Item title:** Banking — Key management (retail) — Part 5: Key life cycle for public key cryptosystems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11568-4:2007 | ISO/WD 11568-5 - **Withdrawn / published date:** 1998-07-09 _(verified: appears in the quote below)_ > 20744,IS,,ISO 11568-5:1998,Banking — Key management (retail) — Part 5: Key life cycle for public key cryptosystems,Banque — Gestion de clés (services aux particuliers) — Partie 5: Cycle de vie pour les systèmes cryptographiques à clé publique,1998-07-09,1,['35.240.40'],ISO/TC 68/SC 2,9599,,"[39666,39667]","['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1157:1975 - **Identifier:** ISO 1157:1975 _(verified: appears in the quote below)_ - **Item title:** Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1157:1990 - **Withdrawn / published date:** 1975-06-01 _(verified: appears in the quote below)_ > 5725,IS,,ISO 1157:1975,Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio,Matières plastiques — Acétate de cellulose en solution diluée — Détermination de l'indice et du rapport de viscosité,1975-06-01,1,['83.080.20'],ISO/TC 61,9599,,[5726],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1158:1978 - **Identifier:** ISO 1158:1978 _(verified: appears in the quote below)_ - **Item title:** Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1158:1984 - **Withdrawn / published date:** 1978-09-01 _(verified: appears in the quote below)_ > 5727,IS,,ISO 1158:1978,Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine,Plastiques — Homopolymères et copolymères de chlorure de vinyle — Détermination de la teneur en chlore,1978-09-01,1,['83.080.20'],ISO/TC 61,9599,,[5728],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1158:1984 - **Identifier:** ISO 1158:1984 _(verified: appears in the quote below)_ - **Item title:** Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1158:1998 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 5728,IS,,ISO 1158:1984,Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine,Plastiques — Homopolymères et copolymères de chlorure de vinyle — Détermination de la teneur en chlore,1984-12-01,2,['83.080.20'],ISO/TC 61/SC 9,9599,[5727],[26725],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1158:1998 - **Identifier:** ISO 1158:1998 _(verified: appears in the quote below)_ - **Item title:** Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1158:2026 - **Withdrawn / published date:** 1998-04-09 _(verified: appears in the quote below)_ > 26725,IS,,ISO 1158:1998,Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content,Plastiques — Homopolymères et copolymères de chlorure de vinyle — Dosage du chlore,1998-04-09,3,['83.080.20'],ISO/TC 61/SC 9,9599,[5728],[88261],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11591:2000 - **Identifier:** ISO 11591:2000 _(verified: appears in the quote below)_ - **Item title:** Small craft, engine-driven — Field of vision from helm position _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11591:2011 - **Withdrawn / published date:** 2000-12-21 _(verified: appears in the quote below)_ > 19526,IS,,ISO 11591:2000,"Small craft, engine-driven — Field of vision from helm position",Petits navires à moteur — Champ de visibilité au niveau du poste de pilotage,2000-12-21,1,['47.080'],ISO/TC 188,9599,,[46211],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11591:2011 - **Identifier:** ISO 11591:2011 _(verified: appears in the quote below)_ - **Item title:** Small craft, engine-driven — Field of vision from helm position _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11591:2019 - **Withdrawn / published date:** 2011-09-15 _(verified: appears in the quote below)_ > 46211,IS,,ISO 11591:2011,"Small craft, engine-driven — Field of vision from helm position",Petits navires à moteur — Champ de vision depuis le poste de pilotage,2011-09-15,2,['47.080'],ISO/TC 188,9599,[19526],[67210],"['en','fr']",9,"
ISO 11591:2011 specifies requirements for the field of vision from the helm position, forward and astern, in engine-driven small craft of up to 24 m length of hull.
It is not applicable to tiller-steered craft with maximum speed less than 10 knots or sailing craft.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11591:2019 - **Identifier:** ISO 11591:2019 _(verified: appears in the quote below)_ - **Item title:** Small craft — Field of vision from the steering position _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11591:2020 - **Withdrawn / published date:** 2019-04-03 _(verified: appears in the quote below)_ > 67210,IS,,ISO 11591:2019,Small craft — Field of vision from the steering position,Petits navires — Champ de vision depuis le poste de pilotage,2019-04-03,3,['47.080'],ISO/TC 188,9599,[46211],[80914],"['en','fr']",7,"This document specifies requirements for the field of vision from the steering position, forward (horizontally and vertically) and astern, for small craft up to 24 m length of hull (LH) in accordance with ISO 8666.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11592-2:2019 - **Identifier:** ISO 11592-2:2019 _(verified: appears in the quote below)_ - **Item title:** Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 2: Craft with a length of hull between 8 m and 24 m _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11592-2:2021 - **Withdrawn / published date:** 2019-04-10 _(verified: appears in the quote below)_ > 67295,IS,,ISO 11592-2:2019,Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 2: Craft with a length of hull between 8 m and 24 m,Petits navires — Détermination de la puissance maximale de propulsion en utilisant la vitesse de manoeuvre — Partie 2: Navires d'une longueur de coque comprise entre 8 m et 24 m,2019-04-10,1,['47.080'],ISO/TC 188,9599,,[81925],"['en','fr']",8,"This document specifies the requirements for determining the maximum propulsion power rating using manoeuvring speed for engine-driven craft with a length of the hull (LH, as defined in ISO 8666) between 8 m and 24 m.
This document is applicable to craft with a calculated F Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11592:2001 - **Identifier:** ISO 11592:2001 _(verified: appears in the quote below)_ - **Item title:** Small craft less than 8 m length of hull — Determination of maximum propulsion power rating _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11592-1:2016 - **Withdrawn / published date:** 2001-06-21 _(verified: appears in the quote below)_ > 33072,IS,,ISO 11592:2001,Small craft less than 8 m length of hull — Determination of maximum propulsion power rating,Petits navires d'une longueur de coque de moins de 8 m — Détermination de la puissance nominale maximale de propulsion,2001-06-21,1,['47.080'],ISO/TC 188,9599,,[67603],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11593:1996 - **Identifier:** ISO 11593:1996 _(verified: appears in the quote below)_ - **Item title:** Manipulating industrial robots — Automatic end effector exchange systems — Vocabulary and presentation of characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11593:2022 - **Withdrawn / published date:** 1996-08-15 _(verified: appears in the quote below)_ > 19528,IS,,ISO 11593:1996,Manipulating industrial robots — Automatic end effector exchange systems — Vocabulary and presentation of characteristics,Robots manipulateurs industriels — Systèmes de changement automatique de terminal — Vocabulaire et présentation des caractéristiques,1996-08-15,1,"['25.040.30','01.040.25']",ISO/TC 299,9599,,[74676],"['en','fr']",18,"
Defines terms relevant to automatic end effector exchange systems used for manipulating industrial robots. The terms are presented by their symbol, unit, definition and description. The definition includes references to existing standards.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11596:2008 - **Identifier:** ISO 11596:2008 _(verified: appears in the quote below)_ - **Item title:** Jewellery — Sampling of precious metal alloys for and in jewellery and associated products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11596:2021 - **Withdrawn / published date:** 2008-08-18 _(verified: appears in the quote below)_ > 43420,IS,,ISO 11596:2008,Jewellery — Sampling of precious metal alloys for and in jewellery and associated products,"Joaillerie, bijouterie — Échantillonnage des alliages de métaux précieux pour la joaillerie, bijouterie et produits associés",2008-08-18,1,['39.060'],ISO/TC 174,9599,,[79761],"['en','ru']",9,"ISO 11596:2008 specifies a method of sampling precious metal jewellery alloys for the determination of the precious metal content. It is applicable to raw materials, semi-finished products and finished products of the jewellery alloys of precious metals. The purpose of ISO 11596:2008 is to define all the operations needed to obtain samples intended for the determination of the precious Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11600:1993 - **Identifier:** ISO 11600:1993 _(verified: appears in the quote below)_ - **Item title:** Building construction — Sealants — Classification and requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11600:2002 - **Withdrawn / published date:** 1993-01-21 _(verified: appears in the quote below)_ > 19535,IS,,ISO 11600:1993,Building construction — Sealants — Classification and requirements,Construction immobilière — Mastics — Classification et exigences,1993-01-21,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[26328],"['en','fr']",5,"
Specifies the types and classes of sealant used in building construction according to their applications and performance characteristics. Furthermore, the requirements and respective test methods for the different classes are stipulated.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11601:1999 - **Identifier:** ISO 11601:1999 _(verified: appears in the quote below)_ - **Item title:** Wheeled fire extinguishers — Performance and construction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11601:2008 - **Withdrawn / published date:** 1999-12-02 _(verified: appears in the quote below)_ > 19536,IS,,ISO 11601:1999,Wheeled fire extinguishers — Performance and construction,Extincteurs sur roues — Performances et construction,1999-12-02,1,['13.220.10'],ISO/TC 21/SC 2,9599,,[44046],"['en','fr']",26, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11601:2008 - **Identifier:** ISO 11601:2008 _(verified: appears in the quote below)_ - **Item title:** Fire fighting — Wheeled fire extinguishers — Performance and construction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11601:2017 - **Withdrawn / published date:** 2008-12-08 _(verified: appears in the quote below)_ > 44046,IS,,ISO 11601:2008,Fire fighting — Wheeled fire extinguishers — Performance and construction,Lutte contre l'incendie — Extincteurs sur roues — Performances et construction,2008-12-08,2,['13.220.10'],ISO/TC 21/SC 2,9599,[19536],[65986],['en'],26,"ISO 11601:2008 specifies the principal requirements intended to ensure the safety, reliability and performance of wheeled fire extinguishers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11602-1:2000 - **Identifier:** ISO 11602-1:2000 _(verified: appears in the quote below)_ - **Item title:** Fire protection — Portable and wheeled fire extinguishers — Part 1: Selection and installation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11602-1:2010 - **Withdrawn / published date:** 2000-07-20 _(verified: appears in the quote below)_ > 19537,IS,,ISO 11602-1:2000,Fire protection — Portable and wheeled fire extinguishers — Part 1: Selection and installation,Protection contre l'incendie — Extincteurs portatifs et extincteurs sur roues — Partie 1: Choix et installation,2000-07-20,1,['13.220.10'],ISO/TC 21/SC 2,9599,,[44782],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11602-2:2000 - **Identifier:** ISO 11602-2:2000 _(verified: appears in the quote below)_ - **Item title:** Fire protection — Portable and wheeled fire extinguishers — Part 2: Inspection and maintenance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 11602-2:2010 - **Withdrawn / published date:** 2000-07-20 _(verified: appears in the quote below)_ > 31089,IS,,ISO 11602-2:2000,Fire protection — Portable and wheeled fire extinguishers — Part 2: Inspection and maintenance,Protection contre l'incendie — Extincteurs portatifs et extincteurs sur roues — Partie 2: Contrôle et maintenance,2000-07-20,1,['13.220.10'],ISO/TC 21/SC 2,9599,,[44783],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11606:1997 - **Identifier:** ISO 11606:1997 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Marine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11606:2000 - **Withdrawn / published date:** 1997-06-19 _(verified: appears in the quote below)_ > 19541,IS,,ISO 11606:1997,Ships and marine technology — Marine,Navires et technologie maritime — Compas électromagnétiques de marine,1997-06-19,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[30555],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11606:2000 - **Identifier:** ISO 11606:2000 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Marine electromagnetic compasses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11606:2022 - **Withdrawn / published date:** 2000-08-24 _(verified: appears in the quote below)_ > 30555,IS,,ISO 11606:2000,Ships and marine technology — Marine electromagnetic compasses,Navires et technologie maritime — Compas électromagnétiques de marine,2000-08-24,2,['47.020.70'],ISO/TC 8/SC 6,9599,[19541],[74752],['en'],15,"This International Standard specifies general requirements, type tests and individual tests for marine electromagnetic
compasses intended for steering purposes and/or taking bearings on board ships required by Chapter V of SOLAS,
1974 and the International Code of Safety for High-Speed Craft (HSC Code). The magnetic compasses
specified in this standard shall apply to the ships the overall length of which is normally not less than 24m . In this< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11606:2000/Cor 1:2005 - **Identifier:** ISO 11606:2000/Cor 1:2005 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Marine electromagnetic compasses — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11606:2022 - **Withdrawn / published date:** 2005-01-04 _(verified: appears in the quote below)_ > 41654,IS,Cor,ISO 11606:2000/Cor 1:2005,Ships and marine technology — Marine electromagnetic compasses — Technical Corrigendum 1,Navires et technologie maritime — Compas électromagnétiques de marine — Rectificatif technique 1,2005-01-04,2,['47.020.70'],ISO/TC 8/SC 6,9599,,[74752],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11607-1:2006 - **Identifier:** ISO 11607-1:2006 _(verified: appears in the quote below)_ - **Item title:** Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11607-1:2019 - **Withdrawn / published date:** 2006-04-07 _(verified: appears in the quote below)_ > 38712,IS,,ISO 11607-1:2006,"Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems","Emballages des dispositifs médicaux stérilisés au stade terminal — Partie 1: Exigences relatives aux matériaux, aux systèmes de barrière stérile et aux systèmes d'emballage",2006-04-07,1,['11.080.30'],ISO/TC 198,9599,[31457],[70799],"['en','fr']",24,"
ISO 11607-1:2006 specifies the requirements and test methods for materials, preformed sterile barrier systems, sterile barrier systems and packaging systems that are intended to maintain sterility of terminally sterilized medical devices until the point of use.
ISO 11607-1: Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11607-1:2006/Amd 1:2014 - **Identifier:** ISO 11607-1:2006/Amd 1:2014 _(verified: appears in the quote below)_ - **Item title:** Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11607-1:2019 - **Withdrawn / published date:** 2014-07-07 _(verified: appears in the quote below)_ > 59366,IS,Amd,ISO 11607-1:2006/Amd 1:2014,"Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems — Amendment 1","Emballages des dispositifs médicaux stérilisés au stade terminal — Partie 1: Exigences relatives aux matériaux, aux systèmes de barrière stérile et aux systèmes d'emballage — Amendement 1",2014-07-07,1,['11.080.30'],ISO/TC 198,9599,,[70799],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11607:1997 - **Identifier:** ISO 11607:1997 _(verified: appears in the quote below)_ - **Item title:** Packaging for terminally sterilized medical devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11607:2003 - **Withdrawn / published date:** 1997-01-30 _(verified: appears in the quote below)_ > 19542,IS,,ISO 11607:1997,Packaging for terminally sterilized medical devices,Emballages des dispositifs médicaux stérilisés au stade terminal,1997-01-30,1,['11.080.30'],ISO/TC 198,9599,,[31457],['en'],18,"
Contains the requirements for single-use materials and reusable containers used for packaging of terminally sterilized medical devices whether produced industrially or in health care facilities. Provides guidelines for the most common practices and techniques for the final packaging. The purpose is, to provide designers and manufacturers of medical devices with a framework of laboratory tests and evaluations that can be used to qualify the overall performance of the package.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11607-2:2006 - **Identifier:** ISO 11607-2:2006 _(verified: appears in the quote below)_ - **Item title:** Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11607-2:2019 - **Withdrawn / published date:** 2006-04-07 _(verified: appears in the quote below)_ > 38713,IS,,ISO 11607-2:2006,"Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes","Emballages des dispositifs médicaux stérilisés au stade terminal — Partie 2: Exigences de validation pour les procédés de formage, scellage et assemblage",2006-04-07,1,['11.080.30'],ISO/TC 198,9599,[31457],[70800],"['en','fr']",11,"ISO 11607-2:2006 specifies the requirements for development and validation of processes for packaging medical devices that are terminally sterilized. These processes include forming, sealing, and assembly of preformed sterile barrier systems, sterile barrier systems and packaging systems.
ISO 11607 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11607-2:2006/Amd 1:2014 - **Identifier:** ISO 11607-2:2006/Amd 1:2014 _(verified: appears in the quote below)_ - **Item title:** Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11607-2:2019 - **Withdrawn / published date:** 2014-07-07 _(verified: appears in the quote below)_ > 59368,IS,Amd,ISO 11607-2:2006/Amd 1:2014,"Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1","Emballages des dispositifs médicaux stérilisés au stade terminal — Partie 2: Exigences de validation pour les procédés de formage, scellage et assemblage — Amendement 1",2014-07-07,1,['11.080.30'],ISO/TC 198,9599,,[70800],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11607:2003 - **Identifier:** ISO 11607:2003 _(verified: appears in the quote below)_ - **Item title:** Packaging for terminally sterilized medical devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11607-1:2006 | ISO 11607-2:2006 - **Withdrawn / published date:** 2003-02-10 _(verified: appears in the quote below)_ > 31457,IS,,ISO 11607:2003,Packaging for terminally sterilized medical devices,Emballages des dispositifs médicaux stérilisés au stade terminal,2003-02-10,2,['11.080.30'],ISO/TC 198,9599,[19542],"[38712,38713]","['en','fr']",23,"
This International Standard specifies the requirements for single-use materials and reusable containers used for packaging of terminally sterilized medical devices, whether produced industrially or in health care facilities.
This International Standard outlines principal requirements for packaging process development and validation for the manufacturer of terminally sterilized medical devices. Forming and sealing are considered to be the most critical process Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-1:2000 - **Identifier:** ISO 11608-1:2000 _(verified: appears in the quote below)_ - **Item title:** Pen-injectors for medical use — Part 1: Pen-injectors — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11608-1:2012 - **Withdrawn / published date:** 2000-12-21 _(verified: appears in the quote below)_ > 19545,IS,,ISO 11608-1:2000,Pen-injectors for medical use — Part 1: Pen-injectors — Requirements and test methods,Stylos-injecteurs à usage médical — Partie 1: Stylos-injecteurs — Exigences et méthodes d'essai,2000-12-21,1,['11.040.25'],ISO/TC 84,9599,,[52525],"['en','fr']",25, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-1:2012 - **Identifier:** ISO 11608-1:2012 _(verified: appears in the quote below)_ - **Item title:** Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11608-1:2014 - **Withdrawn / published date:** 2012-03-30 _(verified: appears in the quote below)_ > 52525,IS,,ISO 11608-1:2012,Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems,Systèmes d'injection à aiguille pour usage médical — Exigences et méthodes d'essai — Partie 1: Systèmes d'injection à aiguille,2012-03-30,2,['11.040.25'],ISO/TC 84,9599,[19545],[65021],"['en','fr']",40, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-1:2014 - **Identifier:** ISO 11608-1:2014 _(verified: appears in the quote below)_ - **Item title:** Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11608-1:2022 - **Withdrawn / published date:** 2014-12-16 _(verified: appears in the quote below)_ > 65021,IS,,ISO 11608-1:2014,Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems,Systèmes d'injection à aiguille pour usage médical — Exigences et méthodes d'essai — Partie 1: Systèmes d'injection à aiguille,2014-12-16,3,['11.040.25'],ISO/TC 84,9599,[52525],[70733],"['en','fr']",41,"
ISO 11608-1:2014 specifies requirements and test methods for needle-based injection systems (NISs) intended to be used with needles and with replaceable or non-replaceable containers. Containers covered in ISO 11608-1:2014 include single- and multi-dose syringe-based and cartridge-based systems, filled either by the manufacturer or by the end-us Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-2:2000 - **Identifier:** ISO 11608-2:2000 _(verified: appears in the quote below)_ - **Item title:** Pen-injectors for medical use — Part 2: Needles — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11608-2:2012 - **Withdrawn / published date:** 2000-12-21 _(verified: appears in the quote below)_ > 24229,IS,,ISO 11608-2:2000,Pen-injectors for medical use — Part 2: Needles — Requirements and test methods,Stylos-injecteurs à usage médical — Partie 2: Aiguilles — Exigences et méthodes d'essai,2000-12-21,1,['11.040.25'],ISO/TC 84,9599,,[52526],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-2:2012 - **Identifier:** ISO 11608-2:2012 _(verified: appears in the quote below)_ - **Item title:** Needle-based injection systems for medical use — Requirements and test methods — Part 2: Needles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11608-2:2022 - **Withdrawn / published date:** 2012-03-30 _(verified: appears in the quote below)_ > 52526,IS,,ISO 11608-2:2012,Needle-based injection systems for medical use — Requirements and test methods — Part 2: Needles,Systèmes d'injection à aiguille pour usage médical — Exigences et méthodes d'essai — Partie 2: Aiguilles,2012-03-30,2,['11.040.25'],ISO/TC 84,9599,[24229],[70734],"['en','fr']",17,"
ISO 11608-2:2012 specifies requirements and test methods for single-use, double-ended, sterile needles for needle-based injection systems (NISs) that fulfil the specifications of ISO 11608-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-3:2000 - **Identifier:** ISO 11608-3:2000 _(verified: appears in the quote below)_ - **Item title:** Pen-injectors for medical use — Part 3: Finished cartridges — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11608-3:2012 - **Withdrawn / published date:** 2000-12-21 _(verified: appears in the quote below)_ > 24228,IS,,ISO 11608-3:2000,Pen-injectors for medical use — Part 3: Finished cartridges — Requirements and test methods,Stylos-injecteurs à usage médical — Partie 3: Cartouches prêtes à l'emploi — Exigences et méthodes d'essai,2000-12-21,1,['11.040.25'],ISO/TC 84,9599,,[52527],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-3:2012 - **Identifier:** ISO 11608-3:2012 _(verified: appears in the quote below)_ - **Item title:** Needle-based injection systems for medical use — Requirements and test methods — Part 3: Finished containers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11608-3:2022 - **Withdrawn / published date:** 2012-09-20 _(verified: appears in the quote below)_ > 52527,IS,,ISO 11608-3:2012,Needle-based injection systems for medical use — Requirements and test methods — Part 3: Finished containers,Systèmes d'injection à aiguille pour usage médical — Exigences et méthodes d'essai — Partie 3: Conteneurs prêts à l'emploi,2012-09-20,2,['11.040.25'],ISO/TC 84,9599,[24228],[76626],"['en','fr']",10,"This part of ISO 11608 specifies the functional and design considerations for containers to be used with
needle-based injection systems (NIS) that fulfil the specifications of ISO 11608-1. It is applicable to single and
multi-dose containers (either filled by the manufacturer or by the end-user) which can be provided to the enduser
integrated Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-4:2006 - **Identifier:** ISO 11608-4:2006 _(verified: appears in the quote below)_ - **Item title:** Pen-injectors for medical use — Part 4: Requirements and test methods for electronic and electromechanical pen-injectors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 11608-4 | ISO 11608-4:2022 - **Withdrawn / published date:** 2006-03-17 _(verified: appears in the quote below)_ > 39219,IS,,ISO 11608-4:2006,Pen-injectors for medical use — Part 4: Requirements and test methods for electronic and electromechanical pen-injectors,Stylos-injecteurs à usage médical — Partie 4: Exigences et méthodes d'essai pour stylos-injecteurs électroniques et électromécaniques,2006-03-17,1,['11.040.25'],ISO/TC 84,9599,,"[62431,72450]","['en','fr','ru']",10,
ISO 11608-4:2006 specifies requirements and test methods for electromechanically driven injectors intended to be used with needles and with replaceable or non-replaceable cartridges. The injector may be for single-use or multiple-use. The injector system is intended to deliver medication to an end-user by self-administration or with Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11608-5:2012 - **Identifier:** ISO 11608-5:2012 _(verified: appears in the quote below)_ - **Item title:** Needle-based injection systems for medical use — Requirements and test methods — Part 5: Automated functions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11608-5:2022 - **Withdrawn / published date:** 2012-09-20 _(verified: appears in the quote below)_ > 55729,IS,,ISO 11608-5:2012,Needle-based injection systems for medical use — Requirements and test methods — Part 5: Automated functions,Systèmes d'injection à aiguille pour usage médical — Exigences et méthodes d'essai — Partie 5: Fonctions automatisées,2012-09-20,1,['11.040.25'],ISO/TC 84,9599,,[76627],"['en','fr']",16,"
ISO 11608-5:2012 specifies requirements and test methods for the automated functions of needle-based injection systems with automated functions (NIS-AUTO), for the administration of medicinal products in humans.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11609:1995 - **Identifier:** ISO 11609:1995 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Toothpastes — Requirements, test methods and marking _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11609:2010 - **Withdrawn / published date:** 1995-12-21 _(verified: appears in the quote below)_ > 19546,IS,,ISO 11609:1995,"Dentistry — Toothpastes — Requirements, test methods and marking","Art dentaire — Dentifrices — Exigences, méthodes d'essai et marquage",1995-12-21,1,['97.170'],ISO/TC 106/SC 7,9599,,[38010],"['en','fr']",10,"Gives requirements and test methods for physical and chemical properties, and for marking and/or labelling of toothpastes for daily use with a toothbrush.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11609:2010 - **Identifier:** ISO 11609:2010 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Dentifrices — Requirements, test methods and marking _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11609:2017 - **Withdrawn / published date:** 2010-08-30 _(verified: appears in the quote below)_ > 38010,IS,,ISO 11609:2010,"Dentistry — Dentifrices — Requirements, test methods and marking","Médecine bucco-dentaire — Dentifrices — Exigences, méthodes d'essai et marquage",2010-08-30,2,['97.170'],ISO/TC 106/SC 7,9599,[19546],[70956],"['en','fr']",20,"ISO 11609:2010 specifies requirements for the physical and chemical properties of dentifrices and provides guidelines for suitable test methods. It also specifies requirements for the marking, labelling and packaging of dentifrices.
ISO 11609:2010 applies to dentifrices, including toothpastes, destined to be used by the public on a daily basis with a toothbrush to promote oral hygiene.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11609:2017 - **Identifier:** ISO 11609:2017 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Dentifrices — Requirements, test methods and marking _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11609:2026 - **Withdrawn / published date:** 2017-05-22 _(verified: appears in the quote below)_ > 70956,IS,,ISO 11609:2017,"Dentistry — Dentifrices — Requirements, test methods and marking","Médecine bucco-dentaire — Dentifrices — Exigences, méthodes d'essai et marquage",2017-05-22,3,['97.170'],ISO/TC 106/SC 7,9599,[38010],[85856],"['en','fr']",22,"ISO 11609:2017 specifies requirements for the physical and chemical properties of dentifrices and provides guidelines for suitable test methods. It also specifies requirements for the marking, labelling and packaging of dentifrices.
ISO 11609:2017 applies to dentifrices, including toothpastes, destined to be used by the consumers on a daily basis with a toothbrush to promote oral hygiene.
Specific qualitative and quantitative re Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1161:1980 - **Identifier:** ISO 1161:1980 _(verified: appears in the quote below)_ - **Item title:** Series 1 freight containers — Corner fittings — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1161:1984 - **Withdrawn / published date:** 1980-12-01 _(verified: appears in the quote below)_ > 5731,IS,,ISO 1161:1980,Series 1 freight containers — Corner fittings — Specification,Conteneurs de la série 1 — Pièces de coin — Spécifications,1980-12-01,3,['55.180.10'],ISO/TC 104,9599,,[5732],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1161:1984 - **Identifier:** ISO 1161:1984 _(verified: appears in the quote below)_ - **Item title:** Series 1 freight containers — Corner fittings — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1161:2016 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 5732,IS,,ISO 1161:1984,Series 1 freight containers — Corner fittings — Specification,Conteneurs de la série 1 — Pièces de coin — Spécifications,1984-12-01,4,['55.180.10'],ISO/TC 104/SC 1,9599,[5731],[65553],"['en','fr']",21,"
Establishes the basic dimensions and the functional and strength requirements of corner fittings for series 1 freight containers with the exception of air mode containers. Defines some details of design vital to container interchange in automatic, semi-automatic and conventional systems.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1161:1984/Amd 1:2007 - **Identifier:** ISO 1161:1984/Amd 1:2007 _(verified: appears in the quote below)_ - **Item title:** Series 1 freight containers — Corner fittings — Specification — Amendment 1: 45 ft containers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1161:2016 - **Withdrawn / published date:** 2007-06-19 _(verified: appears in the quote below)_ > 44299,IS,Amd,ISO 1161:1984/Amd 1:2007,Series 1 freight containers — Corner fittings — Specification — Amendment 1: 45 ft containers,Conteneurs de la série 1 — Pièces de coin — Spécifications — Amendement 1: Conteneurs 45 ft,2007-06-19,4,['55.180.10'],ISO/TC 104/SC 1,9599,,[65553],['en'],9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1161:1984/Cor 1:1990 - **Identifier:** ISO 1161:1984/Cor 1:1990 _(verified: appears in the quote below)_ - **Item title:** Series 1 freight containers — Corner fittings — Specification — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1161:2016 - **Withdrawn / published date:** 1990-09-06 _(verified: appears in the quote below)_ > 5733,IS,Cor,ISO 1161:1984/Cor 1:1990,Series 1 freight containers — Corner fittings — Specification — Technical Corrigendum 1,Conteneurs de la série 1 — Pièces de coin — Spécifications — Rectificatif technique 1,1990-09-06,4,['55.180.10'],ISO/TC 104/SC 1,9599,,[65553],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11611:2007 - **Identifier:** ISO 11611:2007 _(verified: appears in the quote below)_ - **Item title:** Protective clothing for use in welding and allied processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11611:2015 - **Withdrawn / published date:** 2007-10-11 _(verified: appears in the quote below)_ > 41377,IS,,ISO 11611:2007,Protective clothing for use in welding and allied processes,Vêtements de protection utilisés pendant le soudage et les techniques connexes,2007-10-11,1,"['13.340.10','25.160.01']",ISO/TC 94/SC 13,9599,,[57455],"['en','fr']",14,"ISO 11611:2007 specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer's head and feet, ISO 11611:2007 is only applicable to hoods and gaiters. ISO 11611:2007 does n Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11611:2015 - **Identifier:** ISO 11611:2015 _(verified: appears in the quote below)_ - **Item title:** Protective clothing for use in welding and allied processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11611:2024 - **Withdrawn / published date:** 2015-07-15 _(verified: appears in the quote below)_ > 57455,IS,,ISO 11611:2015,Protective clothing for use in welding and allied processes,Vêtements de protection utilisés pendant le soudage et les techniques connexes,2015-07-15,2,"['13.340.10','25.160.01']",ISO/TC 94/SC 13,9599,[41377],[74040],"['en','fr']",17,"
ISO 11611:2015 specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves, and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer's head and feet, this International Standard is only applicable to hoods and gaiters. Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 21](https://referencesource.org/iso-standard-supersessions/p/21/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 23](https://referencesource.org/iso-standard-supersessions/p/23/) Last verified: 2026-08-05. Review by: 2027-02-02.