ISO/ASTM 51707 defines possible sources of error in dosimetry performed in gamma, X-ray (bremsstrahlung) and electron irradiation facilities and offers procedures for estimating the resulting magnitude of the uncertainties in the measurement results. Basic concepts of measurement, estimate of the measured value of a quantity, 'true' value, error and uncertainty are defined and discussed. Components of uncertainty are discussed and met Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51707:2005 - **Identifier:** ISO/ASTM 51707:2005 _(verified: appears in the quote below)_ - **Item title:** Guide for estimating uncertainties in dosimetry for radiation processing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51707:2015 - **Withdrawn / published date:** 2005-07-20 _(verified: appears in the quote below)_ > 39028,IS,,ISO/ASTM 51707:2005,Guide for estimating uncertainties in dosimetry for radiation processing,Guide pour l'estimation des incertitudes en dosimétrie pour le traitement par irradiation,2005-07-20,2,['17.240'],ISO/TC 85,9599,[33560],[66730],['en'],24,"
ISO/ASTM 51707:2005 defines possible sources of uncertainty in dosimetry performed in gamma, X-ray (bremsstrahlung), and electron irradiation facilities and offers procedures for estimating the resulting magnitude of the uncertainties in the measurement of absorbed dose using a dosimetry system.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51818:2002 - **Identifier:** ISO/ASTM 51818:2002 _(verified: appears in the quote below)_ - **Item title:** Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51818:2009 - **Withdrawn / published date:** 2002-04-18 _(verified: appears in the quote below)_ > 33561,IS,,ISO/ASTM 51818:2002,Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV,Pratique de la dosimétrie dans une installation de traitement par irradiation utilisant un faisceau d'électrons d'énergies comprises entre 80 keV et 300 keV,2002-04-18,1,['17.240'],ISO/TC 85,9599,[28221],[38105],['en'],8,"ISO/ASTM 51818 covers dosimetric procedures to be followed in order to determine the performance of low energy (300 keV or less) single-gap electron beam radiation processing facilities. Other practices and procedures related to facility characterization, product qualification and routine processing are also discussed.
Th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51818:2009 - **Identifier:** ISO/ASTM 51818:2009 _(verified: appears in the quote below)_ - **Item title:** Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51818:2013 - **Withdrawn / published date:** 2009-07-07 _(verified: appears in the quote below)_ > 38105,IS,,ISO/ASTM 51818:2009,Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV,Pratique de la dosimétrie dans une installation de traitement par irradiation utilisant un faisceau d'électrons d'énergies comprises entre 80 et 300 keV,2009-07-07,2,['17.240'],ISO/TC 85,9599,[33561],[62957],['en'],11,"
ISO 51818:20090 applies to dosimetric procedures to determine the performance of low-energy (300 keV or less) single-gap electron-beam radiation processing facilities.
Other practices and procedures related to facility characterization, process qualification and routine processing are also discussed.
The electron-energy ra Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51818:2013 - **Identifier:** ISO/ASTM 51818:2013 _(verified: appears in the quote below)_ - **Item title:** Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51818:2020 - **Withdrawn / published date:** 2013-05-15 _(verified: appears in the quote below)_ > 62957,IS,,ISO/ASTM 51818:2013,Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV,Pratique de la dosimétrie dans une installation de traitement par irradiation utilisant un faisceau d'électrons d'énergies comprises entre 80 et 300 keV,2013-05-15,3,['17.240'],ISO/TC 85,9599,[38105],[79633],['en'],13,"
ISO/ASTM 51818:2013 covers dosimetric procedures to be followed in installation qualification, operational qualification and performance qualification (IQ, OQ, PQ), and routine processing at electron beam facilities to ensure that the product has been treated with an acceptable range of absorbed doses. Other procedures related to IQ, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51900:2002 - **Identifier:** ISO/ASTM 51900:2002 _(verified: appears in the quote below)_ - **Item title:** Guide for dosimetry in radiation research on food and agricultural products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51900:2009 - **Withdrawn / published date:** 2002-04-18 _(verified: appears in the quote below)_ > 33562,IS,,ISO/ASTM 51900:2002,Guide for dosimetry in radiation research on food and agricultural products,Guide de la dosimétrie pour la recherche dans le domaine de l'irradiation des produits alimentaires et agricoles,2002-04-18,1,"['17.240','67.020']",ISO/TC 85,9599,,[44182],['en'],9,"
ISO/ASTM 15900 covers the minimum requirements for dosimetry and absorbed-dose validation needed to conduct research on the irradiation of food and agricultural products. Such research includes establishment of the quantitative relationship between the absorbed dose and the relevant effects in these products. This International Standard also describes the overall need for dosimetry in such research, and in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51900:2009 - **Identifier:** ISO/ASTM 51900:2009 _(verified: appears in the quote below)_ - **Item title:** Guide for dosimetry in radiation research on food and agricultural products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM NP 51900 | ISO/ASTM 51900:2023 - **Withdrawn / published date:** 2009-07-07 _(verified: appears in the quote below)_ > 44182,IS,,ISO/ASTM 51900:2009,Guide for dosimetry in radiation research on food and agricultural products,Guide de la dosimétrie pour la recherche dans le domaine de l'irradiation des produits alimentaires et agricoles,2009-07-07,2,"['17.240','67.020']",ISO/TC 85,9599,[33562],"[80804,82853]",['en'],12,"
ISO 51900:2009 applies to the minimum requirements for dosimetry needed to conduct research on the effect of radiation on food and agricultural products. Such research includes establishment of the quantitative relationship between absorbed dose and the relevant effects in these products. ISO 51900:2009 also describes the overall requirement for dosimetry in such research, and in reporting Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51939:2002 - **Identifier:** ISO/ASTM 51939:2002 _(verified: appears in the quote below)_ - **Item title:** Practice for blood irradiation dosimetry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51939:2005 - **Withdrawn / published date:** 2002-04-18 _(verified: appears in the quote below)_ > 33563,IS,,ISO/ASTM 51939:2002,Practice for blood irradiation dosimetry,Guide de la dosimétrie pour l'irradiation du sang,2002-04-18,1,"['17.240','11.020']",ISO/TC 85,9599,,[39031],['en'],12,"
ISO/ASTM 51939 outlines irradiator installation qualification and dosimetric procedures to be followed in the irradiation of blood and blood products by the blood-banking community. If followed, these procedures will help to ensure that the products processed with ionizing radiation from gamma, bremsstrahlung X-rays or electron sources receive absorbed doses within a predetermined range.
ISO/ASTM 51939 covers dosimetry for the irradiation of blood for the following types of irradiators: self-con Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51939:2005 - **Identifier:** ISO/ASTM 51939:2005 _(verified: appears in the quote below)_ - **Item title:** Practice for blood irradiation dosimetry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51939:2013 - **Withdrawn / published date:** 2005-07-22 _(verified: appears in the quote below)_ > 39031,IS,,ISO/ASTM 51939:2005,Practice for blood irradiation dosimetry,Pratique de la dosimétrie pour l'irradiation du sang,2005-07-22,2,"['17.240','11.020']",ISO/TC 85,9599,[33563],[63643],['en'],13,"
ISO/ASTM 51939:2005 outlines irradiator installation qualification, operational qualification, performance qualification, and routine product processing dosimetric procedures to be followed in the irradiation of blood and blood components by the blood-banking community. If followed, these procedures will help to ensure that the products processed with ionizing radiation from gamma, X-rays (bremsstrahlung), or electron sources receive absorbed doses within a predetermined range.
ISO/AST Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51939:2013 - **Identifier:** ISO/ASTM 51939:2013 _(verified: appears in the quote below)_ - **Item title:** Practice for blood irradiation dosimetry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51939:2017 - **Withdrawn / published date:** 2013-10-01 _(verified: appears in the quote below)_ > 63643,IS,,ISO/ASTM 51939:2013,Practice for blood irradiation dosimetry,Pratique de la dosimétrie pour l'irradiation du sang,2013-10-01,3,"['17.240','11.020.99']",ISO/TC 85,9599,[39031],[71031],['en'],13,"
ISO/ASTM 51939:2013 outlines irradiator installation qualification, operational qualification, performance qualification and routine product processing dosimetric procedures to be followed in the irradiation of blood and blood components by the blood-banking community. If followed, these procedures will help to ensure that the products processed with ionizing radiation from gamma, X-radiation (bremsstrahlung), or electron sources receive absorbed doses within a predetermined range. ISO/AS Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51940:2002 - **Identifier:** ISO/ASTM 51940:2002 _(verified: appears in the quote below)_ - **Item title:** Guide for dosimetry for irradiation of insects for sterile release programs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51940:2004 - **Withdrawn / published date:** 2002-04-18 _(verified: appears in the quote below)_ > 33564,IS,,ISO/ASTM 51940:2002,Guide for dosimetry for irradiation of insects for sterile release programs,Guide de la dosimétrie pour les programmes de stérilisation des insectes,2002-04-18,1,"['17.240','07.080']",ISO/TC 85,9599,,[39032],['en'],11,"
ISO/ASTM 51940 outlines dosimetric procedures to be followed for the radiation sterilization of live insects for use in pest management programmes. The primary use of irradiated, reproductively sterile insects is in the Sterile Insect Technique, where large numbers of sterile insects are released into the field to mate with and thus control pest populations of the same species. A secondary use of irradiated insects is as benign hosts for rearin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51940:2004 - **Identifier:** ISO/ASTM 51940:2004 _(verified: appears in the quote below)_ - **Item title:** Guide for dosimetry for sterile insects release programs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51940:2013 - **Withdrawn / published date:** 2004-10-25 _(verified: appears in the quote below)_ > 39032,IS,,ISO/ASTM 51940:2004,Guide for dosimetry for sterile insects release programs,Guide de la dosimétrie pour des programmes de lâchers d'insectes stériles,2004-10-25,2,"['17.240','07.080']",ISO/TC 85,9599,[33564],[61087],['en'],12,"
ISO/ASTM 51940:2004 outlines dosimetric procedures to be followed for the radiation sterilization of live insects for use in pest management programs. The procedures outlined in ISO/ASTM 51940:2004 will help ensure that insects processed with ionizing radiation from gamma, electron, or X-ray sources receive absorbed doses within a predetermined range. Information on effective dose ranges for specific applications of insect sterilization, or on methodology Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51940:2013 - **Identifier:** ISO/ASTM 51940:2013 _(verified: appears in the quote below)_ - **Item title:** Guide for dosimetry for sterile insects release programs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51940:2022 - **Withdrawn / published date:** 2013-03-22 _(verified: appears in the quote below)_ > 61087,IS,,ISO/ASTM 51940:2013,Guide for dosimetry for sterile insects release programs,Guide de la dosimétrie pour des programmes de lâchers d'insectes stériles,2013-03-22,3,"['17.240','07.080']",ISO/TC 85,9599,[39032],[83805],['en'],12,"
ISO/ASTM 51940:2013 outlines dosimetric procedures to be followed for the radiation-induced reproductive sterilization of live insects for use in pest management programs. The primary use of such insects is in the Sterile Insect Technique, where large numbers of reproductively sterile insects are released into the field to mate with and thus control pest populations of the same species. A secondary use of sterile insects is as benign hosts for rearing ins Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51956:2002 - **Identifier:** ISO/ASTM 51956:2002 _(verified: appears in the quote below)_ - **Item title:** Practice for use of thermoluminescence-dosimetry (TLD) systems for radiation processing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51956:2005 - **Withdrawn / published date:** 2002-04-18 _(verified: appears in the quote below)_ > 33565,IS,,ISO/ASTM 51956:2002,Practice for use of thermoluminescence-dosimetry (TLD) systems for radiation processing,Pratique de l'utilisation des systèmes dosimétriques à thermoluminescence pour le traitement par irradiation,2002-04-18,1,['17.240'],ISO/TC 85,9599,,[41772],['en'],8,"
ISO/ASTM 51956 covers procedures for the use of thermoluminescence dosimeters (TLDs) utilized as routine dosimeters to determine the absorbed dose in a material irradiated by ionizing radiation. Examples of materials useful as TLDs include LiF, CaF 2, CaSO4, Li2B4O7 and Al2O3.
Although some elements of the procedures have broad Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 51956:2005 - **Identifier:** ISO/ASTM 51956:2005 _(verified: appears in the quote below)_ - **Item title:** Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 51956:2013 - **Withdrawn / published date:** 2005-06-03 _(verified: appears in the quote below)_ > 41772,IS,,ISO/ASTM 51956:2005,Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing,Pratique de l'utilisation des systèmes dosimétriques à thermoluminescence pour le traitement par irradiation,2005-06-03,2,['17.240'],ISO/TC 85,9599,[33565],[62922],['en'],8,"
ISO/ASTM 51956:2005 covers procedures for the use of thermoluminescence dosimeters (TLDs) to determine the absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose to water. It covers systems that permit absorbed dose measurements under the following conditions: the absorbed-dose range is from 1 Gy to 100 kGy; the absorbed-dose rate is between 1 x 10-2 and 1 x Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52116:2002 - **Identifier:** ISO/ASTM 52116:2002 _(verified: appears in the quote below)_ - **Item title:** Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 52116:2013 - **Withdrawn / published date:** 2002-12-06 _(verified: appears in the quote below)_ > 36806,IS,,ISO/ASTM 52116:2002,Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator,Pratique de la dosimétrie appliquée à un irradiateur gamma renfermant une source auto-protégée entreposée à sec,2002-12-06,1,['17.240'],ISO/TC 85,9599,,[60213],['en'],13,"ISO/ASTM 52116:2002 outlines dosimetric procedures to be followed with self-contained dry-storage gamma-ray irradiators. ISO/ASTM 52116:2002 covers dosimetry in the use of dry-storage gamma-ray irradiators, namely self-contained dry-storage 137Cs or 60Co irradiators (shielded freestanding irradiators). It does not cover underwater pool sources, panoramic gamma-ray sources such as those raised mec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52628:2013 - **Identifier:** ISO/ASTM 52628:2013 _(verified: appears in the quote below)_ - **Item title:** Standard practice for dosimetry in radiation processing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 52628:2020 - **Withdrawn / published date:** 2013-12-09 _(verified: appears in the quote below)_ > 61973,IS,,ISO/ASTM 52628:2013,Standard practice for dosimetry in radiation processing,Pratique standard pour dosimétrie au traitement par irradiation,2013-12-09,1,['17.240'],ISO/TC 85,9599,,[78206],['en'],13,"
ISO/ASTM 52628:2013 describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance on the selection of dosimetry systems and directs the user to other standards that provide specific information on individual dosimetry systems, calibration methods, uncertainty estimation and radiation processing applications.
ISO/ASTM 52628:2013 applies to dosimetry for radiation Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52900:2015 - **Identifier:** ISO/ASTM 52900:2015 _(verified: appears in the quote below)_ - **Item title:** Additive manufacturing — General principles — Terminology _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 52900:2021 - **Withdrawn / published date:** 2015-12-15 _(verified: appears in the quote below)_ > 69669,IS,,ISO/ASTM 52900:2015,Additive manufacturing — General principles — Terminology,Fabrication additive — Principes généraux — Terminologie,2015-12-15,1,"['25.030','01.040.25']",ISO/TC 261,9599,,[74514],"['en','fr']",19,"
ISO/ASTM 52900:2015 establishes and defines terms used in additive manufacturing (AM) technology, which applies the additive shaping principle and thereby builds physical 3D geometries by successive addition of material.
The terms have been classified into specific fields of application.
New terms emerging from the future work within ISO/TC 261 and ASTM F42 will be included in upcoming amendments and overviews of this International Standard.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52902:2019 - **Identifier:** ISO/ASTM 52902:2019 _(verified: appears in the quote below)_ - **Item title:** Additive manufacturing — Test artifacts — Geometric capability assessment of additive manufacturing systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 52902:2023 - **Withdrawn / published date:** 2019-07-31 _(verified: appears in the quote below)_ > 67287,IS,,ISO/ASTM 52902:2019,Additive manufacturing — Test artifacts — Geometric capability assessment of additive manufacturing systems,Fabrication additive — Pièces types d'essai — Évaluation de la capacité géométrique des systèmes de fabrication additive,2019-07-31,1,['25.030'],ISO/TC 261,9599,,[79683],"['en','fr']",36,"This document covers the general description of benchmarking test piece geometries along with quantitative and qualitative measurements to be taken on the benchmarking test piece(s) to assess the performance of additive manufacturing (AM) systems.
This performance assessment can serve the following two purposes:
— AM sys Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52904:2019 - **Identifier:** ISO/ASTM 52904:2019 _(verified: appears in the quote below)_ - **Item title:** Additive manufacturing — Process characteristics and performance — Practice for metal powder bed fusion process to meet critical applications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 52904:2024 - **Withdrawn / published date:** 2019-07-31 _(verified: appears in the quote below)_ > 74637,IS,,ISO/ASTM 52904:2019,Additive manufacturing — Process characteristics and performance — Practice for metal powder bed fusion process to meet critical applications,Fabrication additive — Caractéristiques et performances du procédé — Pratique du procédé de fusion sur lit de poudre métallique en vue de répondre aux applications critiques,2019-07-31,1,['25.030'],ISO/TC 261,9599,,[82919],"['en','fr']",11,"
1.1 This practice describes the operation and production control of metal powder bed fusion (PBF) machines and processes to meet critical applications such as commercial aerospace components and medical implants. The requirements contained herein are applicable for production compone Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52909:2022 - **Identifier:** ISO/ASTM 52909:2022 _(verified: appears in the quote below)_ - **Item title:** Additive manufacturing of metals — Finished part properties — Orientation and location dependence of mechanical properties for metal powder bed fusion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 52909:2024 - **Withdrawn / published date:** 2022-10-18 _(verified: appears in the quote below)_ > 74639,IS,,ISO/ASTM 52909:2022,Additive manufacturing of metals — Finished part properties — Orientation and location dependence of mechanical properties for metal powder bed fusion,Fabrication additive de métaux — Propriétés des pièces finies — Dépendance de l'orientation et de l'emplacement sur les propriétés mécaniques pour la fusion sur lit de poudre métallique,2022-10-18,1,['25.030'],ISO/TC 261,9599,,[87956],"['en','fr']",13,"
This document covers supplementary guidelines for evaluation of mechanical properties including static/quasi-static and dynamic testing of metals made by additive manufacturing (AM) to provide guidance toward reporting when results from testing of as-build specim Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52915:2013 - **Identifier:** ISO/ASTM 52915:2013 _(verified: appears in the quote below)_ - **Item title:** Standard specification for additive manufacturing file format (AMF) Version 1.1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 52915:2016 - **Withdrawn / published date:** 2013-05-17 _(verified: appears in the quote below)_ > 61944,IS,,ISO/ASTM 52915:2013,Standard specification for additive manufacturing file format (AMF) Version 1.1,Spécification normalisée pour le format de fichier pour la fabrication additive (AMF) Version 1.1,2013-05-17,1,"['35.240.50','25.030']",ISO/TC 261,9599,,[67472],"['en','fr']",15,"
ISO/ASTM 52915:2013 describes a framework for an interchange format to address the current and future needs of additive manufacturing technology. For the last three decades, the STL file format has been the industry standard for transferring information between design programs and additive manufacturing equipment. An STL file contains information only about a surface mesh and has no provisions for represe Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52915:2016 - **Identifier:** ISO/ASTM 52915:2016 _(verified: appears in the quote below)_ - **Item title:** Specification for additive manufacturing file format (AMF) Version 1.2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/ASTM 52915:2020 - **Withdrawn / published date:** 2016-02-12 _(verified: appears in the quote below)_ > 67472,IS,,ISO/ASTM 52915:2016,Specification for additive manufacturing file format (AMF) Version 1.2,Spécification normalisée pour le format de fichier pour la fabrication additive (AMF) Version 1.2,2016-02-12,2,"['35.240.50','25.030']",ISO/TC 261,9599,[61944],[74640],"['en','fr']",26,"
ISO/ASTM 52915:2016 provides the specification for the Additive Manufacturing File Format (AMF), an interchange format to address the current and future needs of additive manufacturing technology.
The AMF may be prepared, displayed and transmitted provided the requirements of this specification are met. When prepared in a structured electronic format, strict adherence to an extensible markup language Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/ASTM 52921:2013 - **Identifier:** ISO/ASTM 52921:2013 _(verified: appears in the quote below)_ - **Item title:** Standard terminology for additive manufacturing — Coordinate systems and test methodologies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17295:2023 - **Withdrawn / published date:** 2013-05-15 _(verified: appears in the quote below)_ > 62794,IS,,ISO/ASTM 52921:2013,Standard terminology for additive manufacturing — Coordinate systems and test methodologies,Terminologie normalisée pour la fabrication additive — Systèmes de coordonnées et méthodes d'essai,2013-05-15,1,['25.030'],ISO/TC 261,9599,,[76471],"['en','fr']",15,"
ISO/ASTM 52921:2013 includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/CIE 10526:1991 - **Identifier:** ISO/CIE 10526:1991 _(verified: appears in the quote below)_ - **Item title:** CIE standard colorimetric illuminants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CIE 10526:1999 - **Withdrawn / published date:** 1991-12-17 _(verified: appears in the quote below)_ > 18595,IS,,ISO/CIE 10526:1991,CIE standard colorimetric illuminants,Illuminants colorimétriques normalisés CIE,1991-12-17,1,['17.180.20'],CIE,9599,,[30604],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/CIE 10526:1999 - **Identifier:** ISO/CIE 10526:1999 _(verified: appears in the quote below)_ - **Item title:** CIE standard illuminants for colorimetry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10526:2007 - **Withdrawn / published date:** 1999-06-03 _(verified: appears in the quote below)_ > 30604,IS,,ISO/CIE 10526:1999,CIE standard illuminants for colorimetry,Illuminants colorimétriques normalisés CIE,1999-06-03,2,['17.180.20'],CIE,9599,[18595],[41640],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/CIE 10527:1991 - **Identifier:** ISO/CIE 10527:1991 _(verified: appears in the quote below)_ - **Item title:** CIE standard colorimetric observers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10527:2007 - **Withdrawn / published date:** 1991-12-17 _(verified: appears in the quote below)_ > 18596,IS,,ISO/CIE 10527:1991,CIE standard colorimetric observers,Observateurs de référence colorimétriques CIE,1991-12-17,1,['17.180.20'],CIE,9599,,[37408],"['en','fr']",25, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/CIE 11664-5:2016 - **Identifier:** ISO/CIE 11664-5:2016 _(verified: appears in the quote below)_ - **Item title:** Colorimetry — Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CIE 11664-5:2024 - **Withdrawn / published date:** 2016-09-02 _(verified: appears in the quote below)_ > 69034,IS,,ISO/CIE 11664-5:2016,"Colorimetry — Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram","Colorimétrie — Partie 5: Espace chromatique L*u*v* et diagramme de chromaticité uniforme u', v' CIE 1976",2016-09-02,1,['17.180.20'],CIE,9599,[54079],[86224],"['en','fr']",8,"
ISO/CIE 11664-5:2016 specifies the method of calculating the coordinates of the CIE 1976 L*u*v* colour space including correlates of lightness, chroma, saturation and hue. It includes two methods for calculating Euclidean distances in this space to represent the relative perceived magnitude of colour differences. It also specifies the method of calculating the coordinates of the u′,v′ uni Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/CIE 11664-6:2014 - **Identifier:** ISO/CIE 11664-6:2014 _(verified: appears in the quote below)_ - **Item title:** Colorimetry — Part 6: CIEDE2000 Colour-difference formula _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CIE 11664-6:2022 - **Withdrawn / published date:** 2014-01-31 _(verified: appears in the quote below)_ > 63731,IS,,ISO/CIE 11664-6:2014,Colorimetry — Part 6: CIEDE2000 Colour-difference formula,Colorimétrie — Partie 6: Formule d'écart de couleur CIEDE2000,2014-01-31,1,['17.180.20'],CIE,9599,,[82662],"['en','fr','ru']",9,"
ISO 11664-6:2014 specifies the method of calculating colour differences according to the CIEDE2000 formula.
ISO 11664-6:2014 is applicable to input values of CIELAB L*, a*, b* coordinates calculated according to ISO 11664-4:2008(E). ISO 11664-6:2014 may be used for the specification of the colour difference between two colour stimuli perceived as belonging to reflecting or transmitting objects. This includes displays, if they are being used to simulate reflecting or t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/CIE 28077:2016 - **Identifier:** ISO/CIE 28077:2016 _(verified: appears in the quote below)_ - **Item title:** Photocarcinogenesis action spectrum (non-melanoma skin cancers) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CIE 28077:2024 - **Withdrawn / published date:** 2016-10-05 _(verified: appears in the quote below)_ > 69651,IS,,ISO/CIE 28077:2016,Photocarcinogenesis action spectrum (non-melanoma skin cancers),Spectre d'action de la photocarcinogenèse (cancers de la peau hors mélanome),2016-10-05,2,"['13.280','17.180.20']",CIE,9599,[44492],[86223],['en'],7,
ISO/CIE 28077:2016 specifies the action spectrum for photocarcinogenesis of non-melanoma skin cancers.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 12:1977 - **Identifier:** ISO Guide 12:1977 _(verified: appears in the quote below)_ - **Item title:** Comparative testing of consumer products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC Guide 46:1985 - **Withdrawn / published date:** 1977-02-01 _(verified: appears in the quote below)_ > 19723,GUIDE,,ISO Guide 12:1977,Comparative testing of consumer products,Essais comparatifs des produits de consommation,1977-02-01,1,"['19.020','03.080.30']",ISO/COPOLCO,9599,,[19752],,, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 24:1978 - **Identifier:** ISO Guide 24:1978 _(verified: appears in the quote below)_ - **Item title:** Guidelines for the acceptance of testing and inspection agencies by certification bodies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC Guide 38:1983 | ISO/IEC Guide 40:1983 - **Withdrawn / published date:** 1978-09-01 _(verified: appears in the quote below)_ > 19733,GUIDE,,ISO Guide 24:1978,Guidelines for the acceptance of testing and inspection agencies by certification bodies,Directives gouvernant l'application des instituts d'essai et de contrôle par les organes de certification,1978-09-01,1,['03.120.20'],ISO/CASCO,9599,,"[19744,19746]",,, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 27:1983 - **Identifier:** ISO Guide 27:1983 _(verified: appears in the quote below)_ - **Item title:** Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of conformity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 17030:2021 - **Withdrawn / published date:** 1983-03-01 _(verified: appears in the quote below)_ > 19736,GUIDE,,ISO Guide 27:1983,Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of conformity,Instructions visant les mesures correctives à prendre par un organisme de certification dans le cas d'usage abusif de sa marque de conformité,1983-03-01,1,['03.120.20'],ISO/CASCO,9599,,[78283],"['en','fr']",5,"The purpose of this Guide is to identify a series of procedures which a national certification body (non-governmental) should consider in deciding how to respond to a reported misuse of its registered mark of conformity (i.e. violation of a contract, inadequate quality control, or error in assessment of conformity) or a situation in whi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 30:1992 - **Identifier:** ISO Guide 30:1992 _(verified: appears in the quote below)_ - **Item title:** Terms and definitions used in connection with reference materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 30:2015 - **Withdrawn / published date:** 1992-11-12 _(verified: appears in the quote below)_ > 21638,GUIDE,,ISO Guide 30:1992,Terms and definitions used in connection with reference materials,Termes et définitions utilisés en rapport avec les matériaux de référence,1992-11-12,2,"['71.040.30','01.040.71']",ISO/TMBG,9599,,[46209],"['en','fr']",8,"
This Guide recommends terms and their meaning used in connection with reference materials, taking into account those terms which are used in reference material certificates and appropriate test reports.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 30:1992/Amd 1:2008 - **Identifier:** ISO Guide 30:1992/Amd 1:2008 _(verified: appears in the quote below)_ - **Item title:** Terms and definitions used in connection with reference materials — Amendment 1: Revision of definitions for reference material and certified reference material _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 30:2015 - **Withdrawn / published date:** 2008-11-17 _(verified: appears in the quote below)_ > 46210,GUIDE,Amd,ISO Guide 30:1992/Amd 1:2008,Terms and definitions used in connection with reference materials — Amendment 1: Revision of definitions for reference material and certified reference material,Termes et définitions utilisés en rapport avec les matériaux de référence — Amendement 1: Révision des définitions de matériau de référence et de matériau de référence certifié,2008-11-17,2,"['71.040.30','01.040.71']",ISO/TMBG,9599,,[46209],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 30:2015 - **Identifier:** ISO Guide 30:2015 _(verified: appears in the quote below)_ - **Item title:** Reference materials — Selected terms and definitions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP Guide 30 | ISO/CD 33400 | ISO 33400:2026 | ISO/NP 33400 - **Withdrawn / published date:** 2015-02-06 _(verified: appears in the quote below)_ > 46209,GUIDE,,ISO Guide 30:2015,Reference materials — Selected terms and definitions,Matériaux de référence — Termes et définitions choisis,2015-02-06,3,"['71.040.30','01.040.71']",ISO/TC 334,9599,"[21638,46210]","[81592,84206,90461,83042]","['en','fr','ru']",8,"ISO Guide 30:2015 recommends terms and definitions that should be assigned to them when used in connection with reference materials, with particular attention to terms that are used in reference material certificates and corresponding certification reports.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 31:1981 - **Identifier:** ISO Guide 31:1981 _(verified: appears in the quote below)_ - **Item title:** Contents of certificates of reference materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 31:2000 - **Withdrawn / published date:** 1981-09-01 _(verified: appears in the quote below)_ > 19739,GUIDE,,ISO Guide 31:1981,Contents of certificates of reference materials,Contenu des certificats des matériaux de référence,1981-09-01,1,['71.040.30'],ISO/TMBG,9599,,[33188],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 31:2000 - **Identifier:** ISO Guide 31:2000 _(verified: appears in the quote below)_ - **Item title:** Reference materials — Contents of certificates and labels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 31:2015 - **Withdrawn / published date:** 2000-07-20 _(verified: appears in the quote below)_ > 33188,GUIDE,,ISO Guide 31:2000,Reference materials — Contents of certificates and labels,Matériaux de référence — Contenu des certificats et étiquettes,2000-07-20,2,['71.040.30'],ISO/TMBG,9599,[19739],[52468],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 31:2015 - **Identifier:** ISO Guide 31:2015 _(verified: appears in the quote below)_ - **Item title:** Reference materials — Contents of certificates, labels and accompanying documentation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 33401:2024 - **Withdrawn / published date:** 2015-11-06 _(verified: appears in the quote below)_ > 52468,GUIDE,,ISO Guide 31:2015,"Reference materials — Contents of certificates, labels and accompanying documentation","Matériaux de référence — Contenu des certificats, des étiquettes et de la documentation d'accompagnement",2015-11-06,3,['71.040.30'],ISO/TC 334,9599,[33188],[84222],"['en','fr','ru']",10,"ISO/Guide 31:2015 is intended to help reference material (RM) producers in preparing clear and concise documentation to accompany an RM. It lists and explains mandatory, recommended and other categories of information to be considered in the preparation of product information sheets and RM certificates. This information can be used by RM users and other stakeholders in confirming the su Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 32:1997 - **Identifier:** ISO Guide 32:1997 _(verified: appears in the quote below)_ - **Item title:** Calibration in analytical chemistry and use of certified reference materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 33:2015 - **Withdrawn / published date:** 1997-12-25 _(verified: appears in the quote below)_ > 29126,GUIDE,,ISO Guide 32:1997,Calibration in analytical chemistry and use of certified reference materials,Étalonnage en chimie analytique et utilisation de matériaux de référence certifiés,1997-12-25,1,['71.040.30'],ISO/TMBG,9599,,[46212],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 33:1989 - **Identifier:** ISO Guide 33:1989 _(verified: appears in the quote below)_ - **Item title:** Uses of certified reference materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 33:2000 - **Withdrawn / published date:** 1989-05-01 _(verified: appears in the quote below)_ > 19740,GUIDE,,ISO Guide 33:1989,Uses of certified reference materials,Utilisation des matériaux de référence certifiés,1989-05-01,1,['71.040.30'],ISO/TMBG,9599,,[33189],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 33:2000 - **Identifier:** ISO Guide 33:2000 _(verified: appears in the quote below)_ - **Item title:** Uses of certified reference materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 33:2015 - **Withdrawn / published date:** 2000-07-20 _(verified: appears in the quote below)_ > 33189,GUIDE,,ISO Guide 33:2000,Uses of certified reference materials,Utilisation des matériaux de référence certifiés,2000-07-20,2,['71.040.30'],ISO/TMBG,9599,[19740],[46212],"['en','fr']",23, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 33:2015 - **Identifier:** ISO Guide 33:2015 _(verified: appears in the quote below)_ - **Item title:** Reference materials — Good practice in using reference materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 33403:2024 - **Withdrawn / published date:** 2015-02-05 _(verified: appears in the quote below)_ > 46212,GUIDE,,ISO Guide 33:2015,Reference materials — Good practice in using reference materials,Matériaux de référence — Bonne pratique d'utilisation des matériaux de référence,2015-02-05,3,['71.040.30'],ISO/TC 334,9599,"[29126,33189]",[84224],"['en','fr','ru']",31,"
ISO Guide 33:2015 describes good practice in using reference materials (RMs), and certified reference materials (CRMs) in particular, in measurement processes. These uses include the assessment of precision and trueness of measurement methods, quality control, assigning values to materials, calibration, and the establishment of conventional scales. This Guide also relates key characteristics of various types of RMs to the dif Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 34:1996 - **Identifier:** ISO Guide 34:1996 _(verified: appears in the quote below)_ - **Item title:** Quality system guidelines for the production of reference materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 34:2000 - **Withdrawn / published date:** 1996-05-16 _(verified: appears in the quote below)_ > 26560,GUIDE,,ISO Guide 34:1996,Quality system guidelines for the production of reference materials,Lignes directrices pour le système qualité en production de matériaux de référence,1996-05-16,1,"['03.120.10','71.040.30']",ISO/TMBG,9599,,[33145],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 34:2000 - **Identifier:** ISO Guide 34:2000 _(verified: appears in the quote below)_ - **Item title:** General requirements for the competence of reference material producers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 34:2009 - **Withdrawn / published date:** 2000-02-17 _(verified: appears in the quote below)_ > 33145,GUIDE,,ISO Guide 34:2000,General requirements for the competence of reference material producers,Exigences générales pour la compétence des producteurs de matériaux de référence,2000-02-17,2,"['03.120.10','71.040.30']",ISO/TMBG,9599,[26560],[50174],['en'],22, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 34:2000/Cor 1:2003 - **Identifier:** ISO Guide 34:2000/Cor 1:2003 _(verified: appears in the quote below)_ - **Item title:** General requirements for the competence of reference material producers — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 34:2009 - **Withdrawn / published date:** 2003-11-19 _(verified: appears in the quote below)_ > 39579,GUIDE,Cor,ISO Guide 34:2000/Cor 1:2003,General requirements for the competence of reference material producers — Technical Corrigendum 1,Exigences générales pour la compétence des producteurs de matériaux de référence — Rectificatif technique 1,2003-11-19,2,"['03.120.10','71.040.30']",ISO/TMBG,9599,,[50174],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 34:2009 - **Identifier:** ISO Guide 34:2009 _(verified: appears in the quote below)_ - **Item title:** General requirements for the competence of reference material producers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 20034 | ISO 17034:2016 - **Withdrawn / published date:** 2009-11-20 _(verified: appears in the quote below)_ > 50174,GUIDE,,ISO Guide 34:2009,General requirements for the competence of reference material producers,Exigences générales pour la compétence des producteurs de matériaux de référence,2009-11-20,3,"['03.120.10','71.040.30']",ISO/TMBG,9599,"[39579,33145]","[64123,29357]","['en','fr','ru']",34,"
Guide 34:2009 specifies general requirements in accordance with which a reference material producer has to demonstrate that it operates, if it is to be recognized as competent to carry out the production of reference materials.
Guide 34:2009 is intended for the use by reference material producers in the development and implementation of their management system for quality, administrative and te Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 35:1989 - **Identifier:** ISO Guide 35:1989 _(verified: appears in the quote below)_ - **Item title:** Certification of reference materials — General and statistical principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD Guide 35 | ISO Guide 35:2006 - **Withdrawn / published date:** 1989-05-01 _(verified: appears in the quote below)_ > 19741,GUIDE,,ISO Guide 35:1989,Certification of reference materials — General and statistical principles,Certification des matériaux de référence — Principes généraux et statistiques,1989-05-01,2,['71.040.30'],ISO/TMBG,9599,,"[34187,39269]","['en','fr']",32, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 35:2006 - **Identifier:** ISO Guide 35:2006 _(verified: appears in the quote below)_ - **Item title:** Reference materials — General and statistical principles for certification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 35:2017 - **Withdrawn / published date:** 2006-01-26 _(verified: appears in the quote below)_ > 39269,GUIDE,,ISO Guide 35:2006,Reference materials — General and statistical principles for certification,Matériaux de référence — Principes généraux et statistiques pour la certification,2006-01-26,3,['71.040.30'],ISO/TMBG,9599,[19741],[60281],"['en','ru']",64,"
ISO Guide 35:2006 gives statistical principles to assist in the understanding and development of valid methods to assign values to properties of a reference material, including the evaluation of their associated uncertainty, and establish their metrological traceability. Reference materials (RMs) that undergo all steps described in ISO Guide 35:2006 are usually accompanied by a certificate and called a certified reference material Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 35:2017 - **Identifier:** ISO Guide 35:2017 _(verified: appears in the quote below)_ - **Item title:** Reference materials — Guidance for characterization and assessment of homogeneity and stability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 33405:2024 - **Withdrawn / published date:** 2017-08-21 _(verified: appears in the quote below)_ > 60281,GUIDE,,ISO Guide 35:2017,Reference materials — Guidance for characterization and assessment of homogeneity and stability,Matériaux de référence — Lignes directrices pour la caractérisation et l'évaluation de l'homogénéité et la stabilité,2017-08-21,4,['71.040.30'],ISO/TC 334,9599,[39269],[84226],"['en','fr']",105,"
ISO/Guide 35:2017 explains concepts and provides approaches to the following aspects of the production of reference materials:
- the assessment of homogeneity;
- the assessment of stability and the management of the risks associated with possible stability issues related to the properties of interest;
- the characterization and value assign Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 4:1975 - **Identifier:** ISO Guide 4:1975 _(verified: appears in the quote below)_ - **Item title:** Preparation of standard methods of measuring performance of consumer goods (SMMP) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC Guide 36:1982 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 19715,GUIDE,,ISO Guide 4:1975,Preparation of standard methods of measuring performance of consumer goods (SMMP),Préparation de méthodes normalisées d'essai d'aptitude à l'emploi des biens de consommation (MNEA),1975-12-01,1,"['19.020','03.080.30']",ISO/COPOLCO,9599,,[19742],,, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 41:1984 - **Identifier:** ISO Guide 41:1984 _(verified: appears in the quote below)_ - **Item title:** Guide for packaging — Recommendations to comply with consumer needs and protection _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC Guide 41:2003 - **Withdrawn / published date:** 1984-04-01 _(verified: appears in the quote below)_ > 19747,GUIDE,,ISO Guide 41:1984,Guide for packaging — Recommendations to comply with consumer needs and protection,Lignes directrices relatives à l'emballage — Recommandations pour répondre aux besoins et à la protection des consommateurs,1984-04-01,1,"['01.120','55.020']",ISO/COPOLCO,9599,,[33319],"['en','fr']",3,"
Packaging is a product of consumer interest, the cost of which is borne indirectly by the consumer. Standardization of packaging should, therefore, address itself to such factors as safety, health, fitness of purpose, comfort and reliability, as well as such general needs as protection of the environment and energy conservation. When drafting a standard relating to packaging, th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 64:1997 - **Identifier:** ISO Guide 64:1997 _(verified: appears in the quote below)_ - **Item title:** Guide for the inclusion of environmental aspects in product standards _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 64:2008 - **Withdrawn / published date:** 1997-03-06 _(verified: appears in the quote below)_ > 26276,GUIDE,,ISO Guide 64:1997,Guide for the inclusion of environmental aspects in product standards,Guide pour l'introduction des aspects environnementaux dans les normes de produit,1997-03-06,1,"['01.120','13.020.01']",ISO/TMBG,9599,,[41352],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 78:2008 - **Identifier:** ISO Guide 78:2008 _(verified: appears in the quote below)_ - **Item title:** Safety of machinery — Rules for drafting and presentation of safety standards _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 78:2012 - **Withdrawn / published date:** 2008-03-20 _(verified: appears in the quote below)_ > 43921,GUIDE,,ISO Guide 78:2008,Safety of machinery — Rules for drafting and presentation of safety standards,Sécurité des machines — Règles pour l'élaboration et la présentation des normes de sécurité,2008-03-20,1,"['01.120','13.110']",ISO/TMBG,9599,,[57206],"['en','fr']",21,"
ISO Guide 78:2008 presents rules for the drafting and presentation of International Standards dealing with machinery safety and safety components and their revisions, primarily to achieve consistency and acceptable quality of the various standards to be prepared.
It also gives requirements on the criteria for the selection of new work items and for procedures to prepare, produce or revise standards in an effici Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 80:2014 - **Identifier:** ISO Guide 80:2014 _(verified: appears in the quote below)_ - **Item title:** Guidance for the in-house preparation of quality control materials (QCMs) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 33402:2025 - **Withdrawn / published date:** 2014-07-24 _(verified: appears in the quote below)_ > 44313,GUIDE,,ISO Guide 80:2014,Guidance for the in-house preparation of quality control materials (QCMs),Lignes directrices pour la préparation interne des matériaux de référence utilisés pour le contrôle qualité,2014-07-24,1,['71.040.30'],ISO/TC 334,9599,,[84227],"['en','ru']",50,"
ISO Guide 80 outlines the essential characteristics of reference materials for quality control (QC) purposes, and describes the processes by which they can be prepared by competent staff within the facility in which they will be used (i.e. where instability due to transportation conditions is avoided). The content of this Guide also applies to inherently stable materials, which can be transported to other locat Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 82:2014 - **Identifier:** ISO Guide 82:2014 _(verified: appears in the quote below)_ - **Item title:** Guidelines for addressing sustainability in standards _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO Guide 82:2019 - **Withdrawn / published date:** 2014-02-24 _(verified: appears in the quote below)_ > 57775,GUIDE,,ISO Guide 82:2014,Guidelines for addressing sustainability in standards,Lignes directrices pour la prise en compte de la durabilité dans les normes,2014-02-24,1,"['01.120','13.020.01']",ISO/TMBG,9599,,[76561],"['en','fr','ru']",19,"
ISO Guide 82:2014 provides guidance to standards writers on how to take account of sustainability in the drafting, revision and updating of ISO standards and similar deliverables.
It outlines a methodology that ISO standards writers can use to develop their own approach to addressing sustainability on a subject-specific basis.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO Guide 99:1993 - **Identifier:** ISO Guide 99:1993 _(verified: appears in the quote below)_ - **Item title:** International vocabulary of basic and general terms in metrology (VIM) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC Guide 99:2007 - **Withdrawn / published date:** 1993-01-01 _(verified: appears in the quote below)_ > 45321,GUIDE,,ISO Guide 99:1993,International vocabulary of basic and general terms in metrology (VIM),Vocabulaire international des termes fondamentaux et généraux de métrologie (VIM),1993-01-01,2,"['01.040.17','17.020']",ISO/TMBG,9599,,[45324],"['en','fr']",50, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/HL7 10781:2009 - **Identifier:** ISO/HL7 10781:2009 _(verified: appears in the quote below)_ - **Item title:** Electronic Health Record-System Functional Model, Release 1.1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/HL7 10781:2015 - **Withdrawn / published date:** 2009-11-13 _(verified: appears in the quote below)_ > 46087,IS,,ISO/HL7 10781:2009,"Electronic Health Record-System Functional Model, Release 1.1","Modèle fonctionnel d'un système de dossier informatisé de santé (S-DIS) HL7, publication 1.1",2009-11-13,1,['35.240.80'],ISO/TC 215,9599,,[57757],"['en','fr']",213,ISO 10781:2009 describes the content and means of functioning of the electronic health record system of the HL7 EHR Work Group.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/HL7 10781:2015 - **Identifier:** ISO/HL7 10781:2015 _(verified: appears in the quote below)_ - **Item title:** Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10781:2023 - **Withdrawn / published date:** 2015-07-31 _(verified: appears in the quote below)_ > 57757,IS,,ISO/HL7 10781:2015,"Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)","Informatique de santé — Modèle fonctionnel d'un système de dossier de santé informatisé, publication 2 (EHR FM)",2015-07-31,2,['35.240.80'],ISO/TC 215,9599,[46087],[84722],"['en','fr']",69,"ISO 10781:2015 provides a reference list of functions that may be present in an Electronic Health Record System (EHR-S). The function list is described from a user perspective with the intent to enable consistent expression of system functionality. This EHR-S Functional Model, through the creation of Functional Profiles for care settings and realms, enables a standardized descr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/HL7 16527:2016 - **Identifier:** ISO/HL7 16527:2016 _(verified: appears in the quote below)_ - **Item title:** Health informatics — HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16527:2023 - **Withdrawn / published date:** 2016-03-22 _(verified: appears in the quote below)_ > 57046,IS,,ISO/HL7 16527:2016,"Health informatics — HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM)","Informatique de santé — Modèle fonctionnel d'un système de dossier de santé personnel, version 1 (PHRS FM)",2016-03-22,1,['35.240.80'],ISO/TC 215,9599,,[84665],['en'],66,"
ISO/HL7 16527 PHR-S FM:2016 defines a standardized model of the functions that may be present in PHR Systems.
It is beyond the scope of the PHR system to control the use (or intended use) of PHR data. On the contrary, it is within the scope of the PHR system to manage the authorization of an individual (or other application). Those parties are then responsible for using the data for appropria Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/HL7 21731:2006 - **Identifier:** ISO/HL7 21731:2006 _(verified: appears in the quote below)_ - **Item title:** Health informatics — HL7 version 3 — Reference information model — Release 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/HL7 21731:2014 - **Withdrawn / published date:** 2006-08-03 _(verified: appears in the quote below)_ > 40399,IS,,ISO/HL7 21731:2006,Health informatics — HL7 version 3 — Reference information model — Release 1,Informatique de santé — HL7 version 3 — Modèle d'information de référence — Version 1,2006-08-03,1,['35.240.80'],ISO/TC 215,9599,,[61454],['en'],135,
ISO/HL7 21731:2006 deals with a static model of health and health care information as viewed within the scope of HL7 standards development activities.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990 - **Identifier:** ISO/IEC 10021-1:1990 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1990-12-13 _(verified: appears in the quote below)_ > 17945,IS,,ISO/IEC 10021-1:1990,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services,1990-12-13,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],65,"Defines the overall system and service of a Message Handling System (MHS) and serves as a general view of it. Provides the structure of MHS standards, the capabilities of the MHS and the elements of service. The annexes provide important supplemental information and a glossary of 129 terms. Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990/Amd 1:1994 - **Identifier:** ISO/IEC 10021-1:1990/Amd 1:1994 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Amendment 1: Message Store Extensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1994-12-01 _(verified: appears in the quote below)_ > 22457,IS,Amd,ISO/IEC 10021-1:1990/Amd 1:1994,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Amendment 1: Message Store Extensions,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services — Amendement 1: Extensions de dépôt de message,1994-12-01,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],10,
Replaces text in clauses 7.1; 7.4; 8.5; 18; 19.6; 19.7; 19.9. Append text in annexes B and C.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990/Cor 1:1991 - **Identifier:** ISO/IEC 10021-1:1990/Cor 1:1991 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1991-06-20 _(verified: appears in the quote below)_ > 17946,IS,Cor,ISO/IEC 10021-1:1990/Cor 1:1991,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 1,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services — Rectificatif technique 1,1991-06-20,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990/Cor 2:1991 - **Identifier:** ISO/IEC 10021-1:1990/Cor 2:1991 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1991-12-20 _(verified: appears in the quote below)_ > 17947,IS,Cor,ISO/IEC 10021-1:1990/Cor 2:1991,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 2,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services — Rectificatif technique 2,1991-12-20,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],1,Table 11: change the reception classification 'A' to 'N/A' (as given). Annex B: in B.13 and B.14 in the first sentence replace 'should' by 'shall'.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990/Cor 3:1992 - **Identifier:** ISO/IEC 10021-1:1990/Cor 3:1992 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 3 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1992-03-19 _(verified: appears in the quote below)_ > 20427,IS,Cor,ISO/IEC 10021-1:1990/Cor 3:1992,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 3,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services — Rectificatif technique 3,1992-03-19,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],1,Modifies in Table 11 the classification on Reception for 'Use of Distribution List' from 'A' to 'N/A'.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990/Cor 4:1992 - **Identifier:** ISO/IEC 10021-1:1990/Cor 4:1992 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 4 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1992-08-27 _(verified: appears in the quote below)_ > 21219,IS,Cor,ISO/IEC 10021-1:1990/Cor 4:1992,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 4,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services — Rectificatif technique 4,1992-08-27,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],1,Adds a new subclause 15.6 (MHS Security dependencies).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990/Cor 5:1992 - **Identifier:** ISO/IEC 10021-1:1990/Cor 5:1992 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 5 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1992-12-17 _(verified: appears in the quote below)_ > 21718,IS,Cor,ISO/IEC 10021-1:1990/Cor 5:1992,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 5,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services — Rectificatif technique 5,1992-12-17,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],2,"Amends tables 5, 11, subclauses B.76, C.1, C.3.1, C.3.2.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990/Cor 6:1994 - **Identifier:** ISO/IEC 10021-1:1990/Cor 6:1994 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 6 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1994-06-23 _(verified: appears in the quote below)_ > 24001,IS,Cor,ISO/IEC 10021-1:1990/Cor 6:1994,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 6,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services — Rectificatif technique 6,1994-06-23,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],2,"Amends table 11, subclause A.12.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-1:1990/Cor 7:1994 - **Identifier:** ISO/IEC 10021-1:1990/Cor 7:1994 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 7 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-1:2003 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 24717,IS,Cor,ISO/IEC 10021-1:1990/Cor 7:1994,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 1: System and Service Overview — Technical Corrigendum 7,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message (MOTIS) — Partie 1: Présentation générale du système et des services — Rectificatif technique 7,1994-09-29,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[31632],['en'],1,Replaces text in subclause 14.2 and changes a definition in subclause A.6.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-10:1998 - **Identifier:** ISO/IEC 10021-10:1998 _(verified: appears in the quote below)_ - **Item title:** Information technology — Message Handling Systems (MHS) — Part 10: MHS routing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-10:1999 - **Withdrawn / published date:** 1998-09-03 _(verified: appears in the quote below)_ > 29064,IS,,ISO/IEC 10021-10:1998,Information technology — Message Handling Systems (MHS) — Part 10: MHS routing,Technologies de l'information — Systèmes de messagerie (MHS) — Partie 10: Routage MHS,1998-09-03,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[33063],['en'],66, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990 - **Identifier:** ISO/IEC 10021-2:1990 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1990-12-13 _(verified: appears in the quote below)_ > 17948,IS,,ISO/IEC 10021-2:1990,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale,1990-12-13,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[28237],['en'],84, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Amd 1:1994 - **Identifier:** ISO/IEC 10021-2:1990/Amd 1:1994 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1990/Amd 2:1994 | ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1994-05-26 _(verified: appears in the quote below)_ > 17949,IS,Amd,ISO/IEC 10021-2:1990/Amd 1:1994,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Amendment 1,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Amendement 1,1994-05-26,1,['35.240.20'],ISO/IEC JTC 1,9599,,"[17950,28237]",['en'],7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Amd 2:1994 - **Identifier:** ISO/IEC 10021-2:1990/Amd 2:1994 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1994-08-04 _(verified: appears in the quote below)_ > 17950,IS,Amd,ISO/IEC 10021-2:1990/Amd 2:1994,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Amendment 2,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Amendement 2,1994-08-04,1,['35.240.20'],ISO/IEC JTC 1,9599,[17949],[28237],['en'],7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Cor 1:1991 - **Identifier:** ISO/IEC 10021-2:1990/Cor 1:1991 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1991-06-20 _(verified: appears in the quote below)_ > 17951,IS,Cor,ISO/IEC 10021-2:1990/Cor 1:1991,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 1,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Rectificatif technique 1,1991-06-20,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28237],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Cor 2:1991 - **Identifier:** ISO/IEC 10021-2:1990/Cor 2:1991 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1991-12-20 _(verified: appears in the quote below)_ > 17952,IS,Cor,ISO/IEC 10021-2:1990/Cor 2:1991,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 2,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Rectificatif technique 2,1991-12-20,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28237],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Cor 3:1992 - **Identifier:** ISO/IEC 10021-2:1990/Cor 3:1992 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 3 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1992-03-19 _(verified: appears in the quote below)_ > 20428,IS,Cor,ISO/IEC 10021-2:1990/Cor 3:1992,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 3,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Rectificatif technique 3,1992-03-19,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28237],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Cor 4:1992 - **Identifier:** ISO/IEC 10021-2:1990/Cor 4:1992 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 4 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1992-08-27 _(verified: appears in the quote below)_ > 21223,IS,Cor,ISO/IEC 10021-2:1990/Cor 4:1992,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 4,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Rectificatif technique 4,1992-08-27,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28237],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Cor 5:1993 - **Identifier:** ISO/IEC 10021-2:1990/Cor 5:1993 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 5 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1993-12-09 _(verified: appears in the quote below)_ > 22946,IS,Cor,ISO/IEC 10021-2:1990/Cor 5:1993,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 5,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Rectificatif technique 5,1993-12-09,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28237],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Cor 6:1994 - **Identifier:** ISO/IEC 10021-2:1990/Cor 6:1994 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 6 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1994-06-23 _(verified: appears in the quote below)_ > 24000,IS,Cor,ISO/IEC 10021-2:1990/Cor 6:1994,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 6,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Rectificatif technique 6,1994-06-23,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28237],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1990/Cor 7:1994 - **Identifier:** ISO/IEC 10021-2:1990/Cor 7:1994 _(verified: appears in the quote below)_ - **Item title:** Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 7 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:1996 - **Withdrawn / published date:** 1994-09-15 _(verified: appears in the quote below)_ > 24016,IS,Cor,ISO/IEC 10021-2:1990/Cor 7:1994,Information Technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 2: Overall Architecture — Technical Corrigendum 7,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 2: Architecture générale — Rectificatif technique 7,1994-09-15,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28237],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1996 - **Identifier:** ISO/IEC 10021-2:1996 _(verified: appears in the quote below)_ - **Item title:** Information technology — Message Handling Systems (MHS): Overall architecture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:2003 - **Withdrawn / published date:** 1996-12-30 _(verified: appears in the quote below)_ > 28237,IS,,ISO/IEC 10021-2:1996,Information technology — Message Handling Systems (MHS): Overall architecture,Technologies de l'information — Systèmes de messagerie (MHS): Architecture globale,1996-12-30,2,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,"[24000,17950,17951,24016,17948,21223,22946,17952,17949,20428]",[33058],"['en','fr']",87,"Defines the overall architecture of Message Handling Systems (MHS) and serves as a technical introduction to it. Gives a general overview, abstract models of message handling, how one can configure the MHS and how this can be realized by means of OSI.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-2:1996/Cor 1:1998 - **Identifier:** ISO/IEC 10021-2:1996/Cor 1:1998 _(verified: appears in the quote below)_ - **Item title:** Information technology — Message Handling Systems (MHS): Overall architecture — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-2:2003 - **Withdrawn / published date:** 1998-08-27 _(verified: appears in the quote below)_ > 29215,IS,Cor,ISO/IEC 10021-2:1996/Cor 1:1998,Information technology — Message Handling Systems (MHS): Overall architecture — Technical Corrigendum 1,Technologies de l'information — Systèmes de messagerie (MHS): Architecture globale — Rectificatif technique 1,1998-08-27,2,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[33058],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990 - **Identifier:** ISO/IEC 10021-4:1990 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1990-12-13 _(verified: appears in the quote below)_ > 17954,IS,,ISO/IEC 10021-4:1990,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait,1990-12-13,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[28768],['en'],179, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Amd 1:1994 - **Identifier:** ISO/IEC 10021-4:1990/Amd 1:1994 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1994-08-04 _(verified: appears in the quote below)_ > 17955,IS,Amd,ISO/IEC 10021-4:1990/Amd 1:1994,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Amendment 1,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Amendement 1,1994-08-04,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],['en'],4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 1:1991 - **Identifier:** ISO/IEC 10021-4:1990/Cor 1:1991 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1991-06-20 _(verified: appears in the quote below)_ > 17956,IS,Cor,ISO/IEC 10021-4:1990/Cor 1:1991,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 1,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 1,1991-06-20,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],,, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 2:1991 - **Identifier:** ISO/IEC 10021-4:1990/Cor 2:1991 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1991-12-19 _(verified: appears in the quote below)_ > 17957,IS,Cor,ISO/IEC 10021-4:1990/Cor 2:1991,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 2,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 2,1991-12-19,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 3:1992 - **Identifier:** ISO/IEC 10021-4:1990/Cor 3:1992 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 3 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1992-03-19 _(verified: appears in the quote below)_ > 20430,IS,Cor,ISO/IEC 10021-4:1990/Cor 3:1992,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 3,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 3,1992-03-19,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 4:1992 - **Identifier:** ISO/IEC 10021-4:1990/Cor 4:1992 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 4 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1992-08-27 _(verified: appears in the quote below)_ > 21222,IS,Cor,ISO/IEC 10021-4:1990/Cor 4:1992,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 4,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 4,1992-08-27,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 5:1992 - **Identifier:** ISO/IEC 10021-4:1990/Cor 5:1992 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 5 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1992-12-17 _(verified: appears in the quote below)_ > 21719,IS,Cor,ISO/IEC 10021-4:1990/Cor 5:1992,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 5,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 5,1992-12-17,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 6:1993 - **Identifier:** ISO/IEC 10021-4:1990/Cor 6:1993 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 6 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1993-12-09 _(verified: appears in the quote below)_ > 22945,IS,Cor,ISO/IEC 10021-4:1990/Cor 6:1993,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 6,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 6,1993-12-09,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 7:1994 - **Identifier:** ISO/IEC 10021-4:1990/Cor 7:1994 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 7 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1994-06-23 _(verified: appears in the quote below)_ > 23999,IS,Cor,ISO/IEC 10021-4:1990/Cor 7:1994,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 7,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 7,1994-06-23,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 8:1994 - **Identifier:** ISO/IEC 10021-4:1990/Cor 8:1994 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 8 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1994-07-14 _(verified: appears in the quote below)_ > 24017,IS,Cor,ISO/IEC 10021-4:1990/Cor 8:1994,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 8,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 8,1994-07-14,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1990/Cor 9:1994 - **Identifier:** ISO/IEC 10021-4:1990/Cor 9:1994 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 9 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:1997 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 24716,IS,Cor,ISO/IEC 10021-4:1990/Cor 9:1994,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 4: Message Transfer System: Abstract Service Definition and Procedures — Technical Corrigendum 9,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 4: Système de transfert de message: Procédures et définition de service abstrait — Rectificatif technique 9,1994-09-29,1,['35.240.20'],ISO/IEC JTC 1,9599,,[28768],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1997 - **Identifier:** ISO/IEC 10021-4:1997 _(verified: appears in the quote below)_ - **Item title:** Information technology — Message Handling Systems (MHS): Message transfer system: Abstract service definition and procedures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:2003 - **Withdrawn / published date:** 1997-07-17 _(verified: appears in the quote below)_ > 28768,IS,,ISO/IEC 10021-4:1997,Information technology — Message Handling Systems (MHS): Message transfer system: Abstract service definition and procedures,Technologies de l'information — Systèmes de messagerie (MHS): Système de transfert de messages: Définition et procédures du service abstrait,1997-07-17,2,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,"[17956,17957,17954,20430,22945,24716,17955,21222,21719,23999,24017]",[33059],"['en','fr']",156, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1997/Cor 1:1998 - **Identifier:** ISO/IEC 10021-4:1997/Cor 1:1998 _(verified: appears in the quote below)_ - **Item title:** Information technology — Message Handling Systems (MHS): Message transfer system: Abstract service definition and procedures — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:2003 - **Withdrawn / published date:** 1998-08-27 _(verified: appears in the quote below)_ > 29211,IS,Cor,ISO/IEC 10021-4:1997/Cor 1:1998,Information technology — Message Handling Systems (MHS): Message transfer system: Abstract service definition and procedures — Technical Corrigendum 1,Technologies de l'information — Systèmes de messagerie (MHS): Système de transfert de messages: Définition et procédures du service abstrait — Rectificatif technique 1,1998-08-27,2,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[33059],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1997/Cor 2:2000 - **Identifier:** ISO/IEC 10021-4:1997/Cor 2:2000 _(verified: appears in the quote below)_ - **Item title:** Information technology — Message Handling Systems (MHS): Message transfer system: Abstract service definition and procedures — Technical Corrigendum 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:2003 - **Withdrawn / published date:** 2000-04-27 _(verified: appears in the quote below)_ > 34051,IS,Cor,ISO/IEC 10021-4:1997/Cor 2:2000,Information technology — Message Handling Systems (MHS): Message transfer system: Abstract service definition and procedures — Technical Corrigendum 2,Technologies de l'information — Systèmes de messagerie (MHS): Système de transfert de messages: Définition et procédures du service abstrait — Rectificatif technique 2,2000-04-27,2,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[33059],['en'],11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-4:1997/Cor 3:2000 - **Identifier:** ISO/IEC 10021-4:1997/Cor 3:2000 _(verified: appears in the quote below)_ - **Item title:** Information technology — Message Handling Systems (MHS): Message transfer system: Abstract service definition and procedures — Technical Corrigendum 3 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-4:2003 - **Withdrawn / published date:** 2000-04-27 _(verified: appears in the quote below)_ > 31129,IS,Cor,ISO/IEC 10021-4:1997/Cor 3:2000,Information technology — Message Handling Systems (MHS): Message transfer system: Abstract service definition and procedures — Technical Corrigendum 3,Technologies de l'information — Systèmes de messagerie (MHS): Système de transfert de messages: Définition et procédures du service abstrait — Rectificatif technique 3,2000-04-27,2,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[33059],['en'],11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-5:1990 - **Identifier:** ISO/IEC 10021-5:1990 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 5: Message Store: Abstract Service Definition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-5:1994 - **Withdrawn / published date:** 1990-12-13 _(verified: appears in the quote below)_ > 17958,IS,,ISO/IEC 10021-5:1990,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 5: Message Store: Abstract Service Definition,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 5: Dépôt de message: Définition de service abstrait,1990-12-13,1,['35.240.20'],ISO/IEC JTC 1/SC 6,9599,,[22458],['en'],103, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO/IEC 10021-5:1990/Cor 1:1991 - **Identifier:** ISO/IEC 10021-5:1990/Cor 1:1991 _(verified: appears in the quote below)_ - **Item title:** Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 5: Message Store: Abstract Service Definition — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 10021-5:1994 - **Withdrawn / published date:** 1991-06-20 _(verified: appears in the quote below)_ > 17959,IS,Cor,ISO/IEC 10021-5:1990/Cor 1:1991,Information technology — Text Communication — Message-Oriented Text Interchange Systems (MOTIS) — Part 5: Message Store: Abstract Service Definition — Technical Corrigendum 1,Technologies de l'information — Communication de texte — Systèmes d'échange de texte en mode message — Partie 5: Dépôt de message: Définition de service abstrait — Rectificatif technique 1,1991-06-20,1,['35.240.20'],ISO/IEC JTC 1,9599,,[22458],,, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 189](https://referencesource.org/iso-standard-supersessions/p/189/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 191](https://referencesource.org/iso-standard-supersessions/p/191/) Last verified: 2026-08-05. Review by: 2027-02-02.