ISO 11295:2010 defines and describes families of techniques for the renovation of non‑pressure and pressure pipelines through the use of plastics pipes, fittings and ancillary components. For each technique family, it identifies areas of application from the range covered by existing renovation product standards, which include underground drainage and sewerage, and undergroun Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11295:2017 - **Identifier:** ISO 11295:2017 _(verified: appears in the quote below)_ - **Item title:** Classification and information on design and applications of plastics piping systems used for renovation and replacement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11295:2022 - **Withdrawn / published date:** 2017-11-02 _(verified: appears in the quote below)_ > 69517,IS,,ISO 11295:2017,Classification and information on design and applications of plastics piping systems used for renovation and replacement,Classification et informations relatives à la conception et aux applications des systèmes de canalisations en plastique destinés à la rénovation et au remplacement,2017-11-02,2,['23.040.01'],ISO/TC 138/SC 8,9599,[41714],[79752],"['en','fr']",52,"
ISO 11295:2017 defines and describes families of techniques for the renovation and trenchless replacement (on or off the line of an existing pipeline) of non-pressure and pressure pipelines through the use of plastics pipes, including plastics composites formed in situ into pipes, fittings and anc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11295:2022 - **Identifier:** ISO 11295:2022 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems used for the rehabilitation of pipelines — Classification and overview of strategic, tactical and operational activities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11295:2026 - **Withdrawn / published date:** 2022-01-21 _(verified: appears in the quote below)_ > 79752,IS,,ISO 11295:2022,"Plastics piping systems used for the rehabilitation of pipelines — Classification and overview of strategic, tactical and operational activities","Systèmes de canalisation en plastique destinés à la réhabilitation des réseaux enterrés — Classification et vue d’ensemble des activités stratégiques, tactiques et opérationnelles",2022-01-21,3,['23.040.01'],ISO/TC 138/SC 8,9599,[69517],[85930],"['en','fr']",67,"
This document specifies the steps of the overall process of pipeline rehabilitation, comprising:
— information on strategic and tactical activities:
a) investigation and condition assessment of the existing pipeline;
b) pipeline rehabilitat Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11296-1:2009 - **Identifier:** ISO 11296-1:2009 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11296-1:2018 - **Withdrawn / published date:** 2009-10-21 _(verified: appears in the quote below)_ > 41702,IS,,ISO 11296-1:2009,Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression — Partie 1: Généralités,2009-10-21,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[70115],"['en','fr','ru']",13,"
ISO 11296-1:2009 specifies the requirements and test methods for plastics piping systems intended to be used for the renovation of underground non‑pressure drainage and sewerage networks, which are operated as gravity systems and subjected to a maximum surcharge pressure Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11296-2:2018 - **Identifier:** ISO 11296-2:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11300-1:2026 - **Withdrawn / published date:** 2018-01-24 _(verified: appears in the quote below)_ > 67420,IS,,ISO 11296-2:2018,Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression — Partie 2: Tubage par tuyau continu avec espace annulaire,2018-01-24,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[85924],"['en','fr']",8,"
ISO 11296-2:2018, in conjunction with ISO 11296-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground no Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11296-3:2009 - **Identifier:** ISO 11296-3:2009 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11296-3:2018 - **Withdrawn / published date:** 2009-10-21 _(verified: appears in the quote below)_ > 41727,IS,,ISO 11296-3:2009,Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression — Partie 3: Tubage par tuyau continu sans espace annulaire,2009-10-21,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[70116],"['en','fr','ru']",19,"
ISO 11296-3:2009, in conjunction with ISO 11296-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of non-pressure drainage and sewerage networks.
It Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11296-3:2009/Cor 1:2011 - **Identifier:** ISO 11296-3:2009/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11296-3:2018 - **Withdrawn / published date:** 2011-04-27 _(verified: appears in the quote below)_ > 59665,IS,Cor,ISO 11296-3:2009/Cor 1:2011,Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression — Partie 3: Tubage par tuyau continu sans espace annulaire — Rectificatif technique 1,2011-04-27,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[70116],"['en','fr','ru']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11296-3:2018 - **Identifier:** ISO 11296-3:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11300-3:2026 | ISO 11300-1:2026 - **Withdrawn / published date:** 2018-07-27 _(verified: appears in the quote below)_ > 70116,IS,,ISO 11296-3:2018,Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression — Partie 3: Tubage par tuyau continu sans espace annulaire,2018-07-27,2,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,"[41727,59665]","[85926,85924]","['en','fr']",15,"
This document, in conjunction with ISO 11296‑1, specifies requirements and test methods for close-fit lining systems used for the renovation of underground non-pressure drainage and sewerage network Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11296-4:2009 - **Identifier:** ISO 11296-4:2009 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11296-4:2018 - **Withdrawn / published date:** 2009-10-21 _(verified: appears in the quote below)_ > 41728,IS,,ISO 11296-4:2009,Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression — Partie 4: Tubage continu par tubes polymérisés sur place,2009-10-21,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[70117],"['en','fr','ru']",32,"
ISO 11296-4:2009, in conjunction with ISO 11296-1, specifies requirements and test methods for cured-in-place pipes and fittings used for the renovation of underground non-pressure drainage and sewerage networks Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11296-7:2011 - **Identifier:** ISO 11296-7:2011 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11296-7:2019 - **Withdrawn / published date:** 2011-10-26 _(verified: appears in the quote below)_ > 41729,IS,,ISO 11296-7:2011,Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression — Partie 7: Tubage par enroulement hélicoïdal avec espace annulaire,2011-10-26,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[70118],"['en','fr','ru']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11297-1:2013 - **Identifier:** ISO 11297-1:2013 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11297-1:2018 - **Withdrawn / published date:** 2013-05-07 _(verified: appears in the quote below)_ > 59384,IS,,ISO 11297-1:2013,Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sous pression — Partie 1: Généralités,2013-05-07,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[70119],"['en','fr','ru']",15,"
ISO 11297-1:2013 specifies the requirements and test methods for plastics piping systems intended to be used for the renovation of underground drainage and sewerage networks under pressure. It is applicable to pipes and fittings, as manufactured, as well as to the inst Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11297-2:2018 - **Identifier:** ISO 11297-2:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11300-1:2026 - **Withdrawn / published date:** 2018-01-24 _(verified: appears in the quote below)_ > 67418,IS,,ISO 11297-2:2018,Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sous pression — Partie 2: Tubage par tuyau continu avec espace annulaire,2018-01-24,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[85924],"['en','fr']",9,"
ISO 11297-2:2018, in conjunction with ISO 11297‑1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11297-3:2013 - **Identifier:** ISO 11297-3:2013 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11297-3:2018 - **Withdrawn / published date:** 2013-06-13 _(verified: appears in the quote below)_ > 59385,IS,,ISO 11297-3:2013,Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sous pression — Partie 3: Tubage par tuyau continu sans espace annulaire,2013-06-13,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,,[70120],"['en','fr','ru']",15,"
ISO 11297-3:2013, in conjunction with ISO 11297-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of underground drainage and sewerage networks under pre Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11297-3:2018 - **Identifier:** ISO 11297-3:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11300-1:2026 - **Withdrawn / published date:** 2018-08-31 _(verified: appears in the quote below)_ > 70120,IS,,ISO 11297-3:2018,Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sous pression — Partie 3: Tubage par tuyau continu sans espace annulaire,2018-08-31,2,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 8,9599,[59385],[85924],"['en','fr']",16,"
This document, in conjunction with ISO 11297‑1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of underground drainage and sewerage networks under pres Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11298-1:2010 - **Identifier:** ISO 11298-1:2010 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground water supply networks — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11298-1:2018 - **Withdrawn / published date:** 2010-02-23 _(verified: appears in the quote below)_ > 2399,IS,,ISO 11298-1:2010,Plastics piping systems for renovation of underground water supply networks — Part 1: General,Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau — Partie 1: Généralités,2010-02-23,1,"['23.040.45','93.025','23.040.20']",ISO/TC 138/SC 8,9599,,[70121],"['en','fr','ru']",14,"
ISO 11298-1:2010 specifies the requirements and test methods for plastics piping systems intended to be used for the renovation of underground water supply networks, which transport water intended for human consumption, including raw water intake pipelines. It is applicable to pipes and fittings, as manufactured, as well as to the installed lining Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11298-2:2018 - **Identifier:** ISO 11298-2:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11300-1:2026 - **Withdrawn / published date:** 2018-01-24 _(verified: appears in the quote below)_ > 67647,IS,,ISO 11298-2:2018,Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes,Systémes de canalisation en plastiques pour la rénovation des réseaux enterrés d’alimentation en eau — Partie 2: Tubage par tuyau continu avec espace annulaire,2018-01-24,1,"['23.040.45','93.025','23.040.20']",ISO/TC 138/SC 8,9599,,[85924],"['en','fr']",9,"
ISO 11298-2:2018, read in conjunction with ISO 11298-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground water supply networks. It is applicable to PE pipes of three different typ Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11298-3:2010 - **Identifier:** ISO 11298-3:2010 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11298-3:2018 - **Withdrawn / published date:** 2010-02-23 _(verified: appears in the quote below)_ > 41730,IS,,ISO 11298-3:2010,Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau — Partie 3: Tubage par tuyau continu sans espace annulaire,2010-02-23,1,"['23.040.45','93.025','23.040.20']",ISO/TC 138/SC 8,9599,,[70122],"['en','fr','ru']",14,"
ISO 11298-3:2010, in conjunction with ISO 11298-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of water supply networks, which transport water intended for human consumption, including raw water intake pipelines.
It is appl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11298-3:2018 - **Identifier:** ISO 11298-3:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11300-1:2026 - **Withdrawn / published date:** 2018-08-31 _(verified: appears in the quote below)_ > 70122,IS,,ISO 11298-3:2018,Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau — Partie 3: Tubage par tuyau continu sans espace annulaire,2018-08-31,2,"['23.040.45','93.025','23.040.20']",ISO/TC 138/SC 8,9599,[41730],[85924],"['en','fr']",16,"
This document, in conjunction with ISO 11298‑1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of water supply networks, which transport water intended for human consumption, including raw water intake pipelines.
It applies Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11299-1:2011 - **Identifier:** ISO 11299-1:2011 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground gas supply networks — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11299-1:2018 - **Withdrawn / published date:** 2011-09-12 _(verified: appears in the quote below)_ > 2375,IS,,ISO 11299-1:2011,Plastics piping systems for renovation of underground gas supply networks — Part 1: General,Systèmes de canalisations en plastique pour la rénovation des réseaux de gaz enterrés — Partie 1: Généralités,2011-09-12,1,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 8,9599,,[70123],"['en','fr','ru']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11299-1:2018 - **Identifier:** ISO 11299-1:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground gas supply networks — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11301-1:2026 - **Withdrawn / published date:** 2018-10-26 _(verified: appears in the quote below)_ > 70123,IS,,ISO 11299-1:2018,Plastics piping systems for renovation of underground gas supply networks — Part 1: General,Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés de distribution de gaz — Partie 1: Généralités,2018-10-26,2,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 8,9599,[2375],[85928],"['en','fr']",15,"
This document specifies the requirements and test methods for plastics piping systems intended to be used for the renovation of underground gas supply networks. It is applicable to pipes and fittings, as manufactured, as well as to the installed lining system. It is not applicable to the existing pipeline or any sprayed coatings or annular filler Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11299-2:2018 - **Identifier:** ISO 11299-2:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11301-1:2026 - **Withdrawn / published date:** 2018-10-26 _(verified: appears in the quote below)_ > 70125,IS,,ISO 11299-2:2018,Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés de distribution de gaz — Partie 2: Tubage par tuyau continu avec espace annulaire,2018-10-26,1,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 8,9599,,[85928],"['en','fr']",9,"
This document, read in conjunction with ISO 11299-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground gas supply networks. It is applicable to polyethylene (PE) pipes of three diff Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11299-3:2011 - **Identifier:** ISO 11299-3:2011 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11299-3:2018 - **Withdrawn / published date:** 2011-09-12 _(verified: appears in the quote below)_ > 41731,IS,,ISO 11299-3:2011,Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux de gaz enterrés — Partie 3: Tubage par tuyau continu sans espace annulaire,2011-09-12,1,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 8,9599,,[70124],"['en','fr','ru']",13,"
ISO 11299-3:2011, in conjunction with ISO 11299-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of gas supply networks.
ISO 11299-3:2011 is applicable to polyethylene (PE) pipes for both independent and interactive pressure pipe liners as we Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11299-3:2018 - **Identifier:** ISO 11299-3:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11301-1:2026 - **Withdrawn / published date:** 2018-10-26 _(verified: appears in the quote below)_ > 70124,IS,,ISO 11299-3:2018,Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes,Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés de distribution de gaz — Partie 3: Tubage par tuyau continu sans espace annulaire,2018-10-26,2,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 8,9599,[41731],[85928],"['en','fr']",16,"
This document, in conjunction with ISO 11299‑1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of gas supply networks.
It applies to pipes and fittings, as manufactured, as well as to the installed lining system. It is applic Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 113-1:1979 - **Identifier:** ISO 113-1:1979 _(verified: appears in the quote below)_ - **Item title:** Rolling bearing accessories — Part 1: Tapered sleeves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 2982-1:1995 | ISO 113:1994 - **Withdrawn / published date:** 1979-04-01 _(verified: appears in the quote below)_ > 3913,IS,,ISO 113-1:1979,Rolling bearing accessories — Part 1: Tapered sleeves,Accessoires de roulements — Partie 1: Manchons coniques,1979-04-01,1,['21.100.20'],ISO/TC 4,9599,,"[20519,20520]","['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 113:1994 - **Identifier:** ISO 113:1994 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Plummer block housings — Boundary dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 113:1999 - **Withdrawn / published date:** 1994-12-15 _(verified: appears in the quote below)_ > 20520,IS,,ISO 113:1994,Rolling bearings — Plummer block housings — Boundary dimensions,Roulements — Paliers — Dimensions d'encombrement,1994-12-15,1,['21.100.20'],ISO/TC 4,9599,"[3913,3914]",[26511],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 113:1999 - **Identifier:** ISO 113:1999 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Plummer block housings — Boundary dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 113:2010 - **Withdrawn / published date:** 1999-03-18 _(verified: appears in the quote below)_ > 26511,IS,,ISO 113:1999,Rolling bearings — Plummer block housings — Boundary dimensions,Roulements — Paliers — Dimensions d'encombrement,1999-03-18,2,['21.100.20'],ISO/TC 4,9599,[20520],[55217],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 113-2:1979 - **Identifier:** ISO 113-2:1979 _(verified: appears in the quote below)_ - **Item title:** Rolling bearing accessories — Part 2: Plummer block housings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 113:1994 - **Withdrawn / published date:** 1979-02-01 _(verified: appears in the quote below)_ > 3914,IS,,ISO 113-2:1979,Rolling bearing accessories — Part 2: Plummer block housings,Accessoires de roulements — Partie 2: Paliers,1979-02-01,1,['21.100.20'],ISO/TC 4,9599,,[20520],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1130:1975 - **Identifier:** ISO 1130:1975 _(verified: appears in the quote below)_ - **Item title:** Textile fibres — Some methods of sampling for testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1130:2026 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 5663,IS,,ISO 1130:1975,Textile fibres — Some methods of sampling for testing,Fibres textiles — Diverses méthodes d'échantillonnage en vue des essais,1975-11-01,1,['59.060.01'],ISO/TC 38/SC 23,9599,[4092],[89248],"['en','fr']",9,"
Applicable for textile materials in all forms. No single technique of sampling can be devised that will serve in all circumstances. General terms and their definitions are given. A lot of different sampling methods are described (e.g. for bast fibres, cotton fibres, man-made staple fibres, and wool fibres). The determination of the number of individuals to be tested in dependence on the variability of the material and the accuracy required is given in the annex. 1170,IS,,ISO 11312:1993,Photography — Film dimensions — Film for electronic scanner use,Photographie — Dimensions des films — Films pour scanners électroniques,1993-10-21,1,"['37.040.20','37.100.20']",ISO/TC 42,9599,,[29449],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11313:1994 - **Identifier:** ISO 11313:1994 _(verified: appears in the quote below)_ - **Item title:** Photography — Disposable cassettes containing photocomposition film and paper — Dimensions and related requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3772:2000 - **Withdrawn / published date:** 1994-11-24 _(verified: appears in the quote below)_ > 1251,IS,,ISO 11313:1994,Photography — Disposable cassettes containing photocomposition film and paper — Dimensions and related requirements,Photographie — Cassettes jetables avec film et papier pour photocomposition — Dimensions et prescriptions connexes,1994-11-24,1,"['37.040.20','37.100.20']",ISO/TC 42,9599,,[28007],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11318:1993 - **Identifier:** ISO 11318:1993 _(verified: appears in the quote below)_ - **Item title:** Cardiac defibrillators — Connector assembly for implantable defibrillators — Dimensional and test requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11318:2002 - **Withdrawn / published date:** 1993-12-23 _(verified: appears in the quote below)_ > 19284,IS,,ISO 11318:1993,Cardiac defibrillators — Connector assembly for implantable defibrillators — Dimensional and test requirements,Défibrillateurs cardiaques — Ensemble connecteur pour défibrillateurs implantables — Prescriptions dimensionnelles et d'essai,1993-12-23,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[31511],"['en','fr']",19,"
Specifies a unipolar connector assembly, DF-1, intended for use in connecting implantable defibrillator leads to implantable defibrillator generators which do not produce more than 1 kV/50 A peak output. Essential dimensions and performance requirements are specified along with test methods.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11318:1993/Amd 1:1996 - **Identifier:** ISO 11318:1993/Amd 1:1996 _(verified: appears in the quote below)_ - **Item title:** Cardiac defibrillators — Connector assembly for implantable defibrillators — Dimensional and test requirements — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11318:2002 - **Withdrawn / published date:** 1996-10-17 _(verified: appears in the quote below)_ > 24230,IS,Amd,ISO 11318:1993/Amd 1:1996,Cardiac defibrillators — Connector assembly for implantable defibrillators — Dimensional and test requirements — Amendment 1,Défibrillateurs cardiaques — Ensemble connecteur pour défibrillateurs implantables — Prescriptions dimensionnelles et d'essai — Amendement 1,1996-10-17,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[31511],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1132:1980 - **Identifier:** ISO 1132:1980 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Tolerances — Definitions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1132-1:2000 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 5665,IS,,ISO 1132:1980,Rolling bearings — Tolerances — Definitions,Roulements — Tolérances — Définitions,1980-10-01,1,"['21.100.20','01.040.21']",ISO/TC 4,9599,[4065],[20514],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11323:1996 - **Identifier:** ISO 11323:1996 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11323:2002 | ISO/WD 11451-3 - **Withdrawn / published date:** 1996-04-18 _(verified: appears in the quote below)_ > 1058,IS,,ISO 11323:1996,Iron ores — Vocabulary,Minerais de fer — Vocabulaire,1996-04-18,1,"['73.060.10','01.040.73']",ISO/TC 102,9599,,"[30026,24565]","['en','fr']",24,"Gives the definitions for sampling, preparation and division of samples, particle size analysis and physical testing. Also included are some specific analytical and statistical terms used in International Standards for iron ores and related materials.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11323:2002 - **Identifier:** ISO 11323:2002 _(verified: appears in the quote below)_ - **Item title:** Iron ore and direct reduced iron — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11323:2010 - **Withdrawn / published date:** 2002-05-30 _(verified: appears in the quote below)_ > 30026,IS,,ISO 11323:2002,Iron ore and direct reduced iron — Vocabulary,Minerais de fer et minerais de fer préréduits — Vocabulaire,2002-05-30,2,"['73.060.10','01.040.73']",ISO/TC 102,9599,[1058],[44231],['en'],25,"ISO 11323 gives the definitions for terms used in Technical Committee 102 standards (Iron ore and direct reduced iron) for sampling, sample preparation, moisture and particle size analysis and physical testing of iron ore and direct reduced iron. Also included are some specific analytical terms used in the relevant International Standards.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11329:1998 - **Identifier:** ISO 11329:1998 _(verified: appears in the quote below)_ - **Item title:** Hydrometric determinations — Measurement of suspended sediment transport in tidal channels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11329:2001 - **Withdrawn / published date:** 1998-12-17 _(verified: appears in the quote below)_ > 19292,IS,,ISO 11329:1998,Hydrometric determinations — Measurement of suspended sediment transport in tidal channels,Déterminations hydrométriques — Mesurage du transport solide dans les canaux à marée,1998-12-17,1,['17.120.20'],ISO/TC 113/SC 6,9599,,[34268],['en'],7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1133-1:2011 - **Identifier:** ISO 1133-1:2011 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1133-1:2022 - **Withdrawn / published date:** 2011-11-28 _(verified: appears in the quote below)_ > 44273,IS,,ISO 1133-1:2011,Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method,"Plastiques — Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR) — Partie 1: Méthode normale",2011-11-28,1,['83.080.20'],ISO/TC 61/SC 5,9599,"[31267,43873]",[83905],"['en','fr']",24, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1133:1981 - **Identifier:** ISO 1133:1981 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the melt flow rate of thermoplastics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1133:1991 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 5666,IS,,ISO 1133:1981,Plastics — Determination of the melt flow rate of thermoplastics,Plastiques — Détermination de l'indice de fluidité à chaud des thermoplastiques,1981-11-01,1,['83.080.01'],ISO/TC 61,9599,,[5667],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1133:1991 - **Identifier:** ISO 1133:1991 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1133:1997 - **Withdrawn / published date:** 1991-03-28 _(verified: appears in the quote below)_ > 5667,IS,,ISO 1133:1991,Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics,"Plastiques — Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR)",1991-03-28,2,['83.080.20'],ISO/TC 61/SC 5,9599,"[4216,5666]",[22113],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1133:1997 - **Identifier:** ISO 1133:1997 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1133:2005 - **Withdrawn / published date:** 1997-01-22 _(verified: appears in the quote below)_ > 22113,IS,,ISO 1133:1997,Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics,"Plastiques — Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR)",1997-01-22,3,['83.080.20'],ISO/TC 61/SC 5,9599,[5667],[31267],"['en','fr']",11,"Describes a method for the determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MFR) of thermoplastics under specified conditions of temperature and load. Does not apply to thermoplastics for which the rheological behaviour is affected by hydrolysis, condensation or crosslinking. Replaces the second edition.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1133:2005 - **Identifier:** ISO 1133:2005 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1133-1:2011 - **Withdrawn / published date:** 2005-06-07 _(verified: appears in the quote below)_ > 31267,IS,,ISO 1133:2005,Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics,"Plastiques — Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR)",2005-06-07,4,['83.080.20'],ISO/TC 61/SC 5,9599,[22113],[44273],"['en','fr']",16,"ISO 1133:2005 specifies two procedures for the determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastic materials under specified conditions of temperature and load. One is a mass-measurement method. The other is a displacement-measurement method. Normally, the test conditions for measurement of melt flow rate are spec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1133:2005/Cor 1:2006 - **Identifier:** ISO 1133:2005/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1133-1:2011 - **Withdrawn / published date:** 2006-02-17 _(verified: appears in the quote below)_ > 43873,IS,Cor,ISO 1133:2005/Cor 1:2006,Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics — Technical Corrigendum 1,"Plastiques — Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR) — Rectificatif technique 1",2006-02-17,4,['83.080.20'],ISO/TC 61/SC 5,9599,,[44273],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11334-1:1994 - **Identifier:** ISO 11334-1:1994 _(verified: appears in the quote below)_ - **Item title:** Walking aids manipulated by one arm — Requirements and test methods — Part 1: Elbow crutches _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11334-1:2007 - **Withdrawn / published date:** 1994-10-27 _(verified: appears in the quote below)_ > 19298,IS,,ISO 11334-1:1994,Walking aids manipulated by one arm — Requirements and test methods — Part 1: Elbow crutches,Aides à la marche manipulées avec un bras — Prescriptions et méthodes d'essai — Partie 1: Cannes à appui antibrachial,1994-10-27,1,['11.180.10'],ISO/TC 173,9599,,[36054],"['en','fr']",7,"
Specifies requirements and test methods for elbow crutches fully equipped with handgrip and tip. Also gives the requirements relating to safety, ergonomics, performance, marking and labelling. The tests are based on everyday usage of elbow crutches when performing the through-swing gait.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11334-4:1999 - **Identifier:** ISO 11334-4:1999 _(verified: appears in the quote below)_ - **Item title:** Walking aids manipulated by one arm — Requirements and test methods — Part 4: Walking sticks with three or more legs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11334-4:2024 - **Withdrawn / published date:** 1999-02-04 _(verified: appears in the quote below)_ > 24915,IS,,ISO 11334-4:1999,Walking aids manipulated by one arm — Requirements and test methods — Part 4: Walking sticks with three or more legs,Aides à la marche manipulées avec un bras — Exigences et méthodes d'essai — Partie 4: Cannes de marche avec au moins trois jambes ou plus,1999-02-04,1,['11.180.10'],ISO/TC 173,9599,,[82388],"['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11336-1:2012 - **Identifier:** ISO 11336-1:2012 _(verified: appears in the quote below)_ - **Item title:** Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11336-1:2023 - **Withdrawn / published date:** 2012-07-03 _(verified: appears in the quote below)_ > 50390,IS,,ISO 11336-1:2012,"Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings","Grands yachts — Résistance, étanchéité aux intempéries et étanchéité à l'eau des ouvertures vitrées — Partie 1: Critères de conception, matériaux, encadrement et essais des ouvertures vitrées indépendantes",2012-07-03,1,['47.040'],ISO/TC 8/SC 12,9599,,[76821],"['en','fr']",48,"ISO 11336-1:2012 specifies technical requirements for glazed openings on large yachts, taking into account navigation conditions, and the location of the opening.
Large yachts are yachts with length of the hull, L< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11337:2004 - **Identifier:** ISO 11337:2004 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11337:2010 - **Withdrawn / published date:** 2004-05-13 _(verified: appears in the quote below)_ > 33330,IS,,ISO 11337:2004,Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography,Plastiques — Polyamides — Détermination du e-caprolactame et du w-laurolactame par chromatographie en phase gazeuse,2004-05-13,1,['83.080.20'],ISO/TC 61/SC 5,9599,,[50595],"['en','fr']",14,"
ISO 11337:2004 specifies a method for determining epsilon-caprolactam and omega-laurolactam in polyamides by gas chromatography. It is suitable particularly for the determination of epsilon-caprolactam in polyamide 6 and omega-laurolactam in polyamide 12. Bearing in mind that gas chromatography offers a wide range of possible conditions, the method specified is that shown to have been Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11337:2004/Cor 1:2007 - **Identifier:** ISO 11337:2004/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11337:2010 - **Withdrawn / published date:** 2007-11-19 _(verified: appears in the quote below)_ > 50526,IS,Cor,ISO 11337:2004/Cor 1:2007,Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography — Technical Corrigendum 1,Plastiques — Polyamides — Détermination du e-caprolactame et du w-laurolactame par chromatographie en phase gazeuse — Rectificatif technique 1,2007-11-19,1,['83.080.20'],ISO/TC 61/SC 5,9599,,[50595],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11337:2010 - **Identifier:** ISO 11337:2010 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11337:2023 - **Withdrawn / published date:** 2010-11-26 _(verified: appears in the quote below)_ > 50595,IS,,ISO 11337:2010,Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography,Plastiques — Polyamides — Détermination du e-caprolactame et du w-laurolactame par chromatographie en phase gazeuse,2010-11-26,2,['83.080.20'],ISO/TC 61/SC 9,9599,"[50526,33330]",[83768],"['en','fr']",14,"
ISO 11337:2010 specifies a method for determining epsilon‑caprolactam and omega‑laurolactam in polyamides by gas chromatography. It is suitable particularly for the determination of epsilon‑caprolactam in polyamide 6 and omega‑laurolactam in polyamide 12. Bearing in mind that gas chromatography offers a wide range of possible conditions, the method specified is that sho Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11339:1993 - **Identifier:** ISO 11339:1993 _(verified: appears in the quote below)_ - **Item title:** Adhesives — 180 degree peel test for flexible-to-flexible bonded assemblies (T-peel test) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11339:2003 - **Withdrawn / published date:** 1993-08-12 _(verified: appears in the quote below)_ > 19303,IS,,ISO 11339:1993,Adhesives — 180 degree peel test for flexible-to-flexible bonded assemblies (T-peel test),Adhésifs — Essai de pelage à 180 degrés d'assemblages collés flexible-sur-flexible (essai de pelage en T),1993-08-12,1,['83.180'],ISO/TC 61/SC 11,9599,,[34854],"['en','fr']",3,"
Specifies a test for the determination of the peel strength of an adhesive by measuring the peeling force of a T-shaped bonded assembly of two flexible adherends. The angle between the bond line und the direction of the applied force is not fixed. Adherends are separated at an approximately steady rate from an open edge of a prepared bond, so that separation occurs progressively along the bond line. Th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11339:2003 - **Identifier:** ISO 11339:2003 _(verified: appears in the quote below)_ - **Item title:** Adhesives — T-peel test for flexible-to-flexible bonded assemblies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11339:2010 - **Withdrawn / published date:** 2003-03-17 _(verified: appears in the quote below)_ > 34854,IS,,ISO 11339:2003,Adhesives — T-peel test for flexible-to-flexible bonded assemblies,Adhésifs — Essai de pelage en T d'assemblages collés flexible sur flexible,2003-03-17,2,['83.180'],ISO/TC 61/SC 11,9599,[19303],[52890],"['en','fr']",5,"
ISO 11339:2003 specifies a T-peel test for the determination of the peel strength of an adhesive by measuring the peeling force of a T-shaped bonded assembly of two flexible adherends. This test procedure does not provide design information.
NOTE This method was originally developed for use with metal adherends, but other flexible adherends may also be used.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11339:2010 - **Identifier:** ISO 11339:2010 _(verified: appears in the quote below)_ - **Item title:** Adhesives — T-peel test for flexible-to-flexible bonded assemblies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11339:2022 - **Withdrawn / published date:** 2010-02-02 _(verified: appears in the quote below)_ > 52890,IS,,ISO 11339:2010,Adhesives — T-peel test for flexible-to-flexible bonded assemblies,Adhésifs — Essai de pelage en T d'assemblages collés flexible sur flexible,2010-02-02,3,['83.180'],ISO/TC 61/SC 11,9599,[34854],[82657],"['en','fr']",6,"ISO 11339:2010 specifies a T‑peel test for the determination of the peel strength of an adhesive by measuring the peeling force of a T‑shaped bonded assembly of two flexible adherends. This test procedure does not provide design information.
This method was originally developed for use with metal adherends, but other, flexible, adherends may also be used.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1134:1980 - **Identifier:** ISO 1134:1980 _(verified: appears in the quote below)_ - **Item title:** Pears — Guide to cold storage _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1134:1993 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 5668,IS,,ISO 1134:1980,Pears — Guide to cold storage,Poires — Guide pour l'entreposage réfrigéré,1980-08-01,1,['67.080.10'],ISO/TC 34,9599,,[20799],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11341:1994 - **Identifier:** ISO 11341:1994 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11341:2004 - **Withdrawn / published date:** 1994-08-25 _(verified: appears in the quote below)_ > 19304,IS,,ISO 11341:1994,Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation,Peintures et vernis — Vieillissement artificiel et exposition aux radiations artificielles — Exposition aux radiations filtrées d'une lampe à arc au xénon,1994-08-25,1,['87.040'],ISO/TC 35/SC 9,9599,,[33045],"['en','fr']",11,"Specifies a method for assessing either the resistance of paint coatings to artificial weathering or the resistance to light by exposure to artificial radiation. Describes the most important parameters and specifies the conditions to be used in the exposure apparatus. In strictly respecting the test conditions specified Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11341:2004 - **Identifier:** ISO 11341:2004 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 11341 | ISO 16474-1:2013 | ISO 16474-2:2013 - **Withdrawn / published date:** 2004-09-03 _(verified: appears in the quote below)_ > 33045,IS,,ISO 11341:2004,Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation,Peintures et vernis — Vieillissement artificiel et exposition au rayonnement artificiel — Exposition au rayonnement filtré d'une lampe à arc au xénon,2004-09-03,2,['87.040'],ISO/TC 35/SC 9,9599,"[7801,19304]","[50311,56803,56830]","['en','fr','ru']",16,"
ISO 11341:2004 specifies a procedure for exposing paint coatings to artificial weathering in xenon-arc lamp apparatus, including the action of liquid water and water vapour. The effects of this weathering are evaluated separately by comparative determination of selected parameters before, dur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11342:1994 - **Identifier:** ISO 11342:1994 _(verified: appears in the quote below)_ - **Item title:** Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11342:1998 - **Withdrawn / published date:** 1994-10-13 _(verified: appears in the quote below)_ > 19305,IS,,ISO 11342:1994,Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors,Vibrations mécaniques — Méthodes et critères d'équilibrage mécanique des rotors flexibles,1994-10-13,1,['21.120.40'],ISO/TC 108,9599,"[11448,11343]",[25296],"['en','fr']",31, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11342:1998 - **Identifier:** ISO 11342:1998 _(verified: appears in the quote below)_ - **Item title:** Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21940-12:2016 - **Withdrawn / published date:** 1998-04-23 _(verified: appears in the quote below)_ > 25296,IS,,ISO 11342:1998,Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors,Vibrations mécaniques — Méthodes et critères pour l'équilibrage mécanique des rotors flexibles,1998-04-23,2,['21.120.40'],ISO/TC 108/SC 2,9599,[19305],[50429],['en'],39, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11342:1998/Cor 1:2000 - **Identifier:** ISO 11342:1998/Cor 1:2000 _(verified: appears in the quote below)_ - **Item title:** Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21940-12:2016 - **Withdrawn / published date:** 2000-06-08 _(verified: appears in the quote below)_ > 34139,IS,Cor,ISO 11342:1998/Cor 1:2000,Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors — Technical Corrigendum 1,Vibrations mécaniques — Méthodes et critères pour l'équilibrage mécanique des rotors flexibles — Rectificatif technique 1,2000-06-08,2,['21.120.40'],ISO/TC 108/SC 2,9599,,[50429],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11343:1993 - **Identifier:** ISO 11343:1993 _(verified: appears in the quote below)_ - **Item title:** Adhesives — Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions — Wedge impact method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11343:2003 - **Withdrawn / published date:** 1993-08-12 _(verified: appears in the quote below)_ > 19306,IS,,ISO 11343:1993,Adhesives — Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions — Wedge impact method,Adhésifs — Détermination de la résistance dynamique à un clivage de joints collés à haute résistance soumis aux conditions d'impact — Méthode d'impact au coin,1993-08-12,1,['83.180'],ISO/TC 61/SC 11,9599,,[34855],"['en','fr']",6,"
The method consists of the determination of the average cleavage resistance, expressed as force or energy, of the adhesive bond between two metallic adherends. The cleavage corresponds to the separation of the adherends by a wedge, moving at high speed, whose displacement is initiated by an impact. The Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11343:2003 - **Identifier:** ISO 11343:2003 _(verified: appears in the quote below)_ - **Item title:** Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions — Wedge impact method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11343:2019 - **Withdrawn / published date:** 2003-04-04 _(verified: appears in the quote below)_ > 34855,IS,,ISO 11343:2003,Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions — Wedge impact method,Adhésifs — Détermination de la résistance dynamique au clivage de joints collés à haute résistance soumis aux conditions d'impact — Méthode d'impact au coin,2003-04-04,2,['83.180'],ISO/TC 61/SC 11,9599,[19306],[75628],"['en','fr']",7,"
ISO 11343:2003 specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading of high-strength adhesive bonds between two metallic adherends, when tested under specified conditions of preparation and testing. This test procedure does not provide design Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11344:2004 - **Identifier:** ISO 11344:2004 _(verified: appears in the quote below)_ - **Item title:** Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11344:2016 - **Withdrawn / published date:** 2004-03-12 _(verified: appears in the quote below)_ > 26999,IS,,ISO 11344:2004,"Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography",Caoutchouc synthétique brut — Détermination de la répartition de la masse moléculaire pour les caoutchoucs polymérisés en solution par chromatographie par perméation de gel,2004-03-12,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[63870],['en'],20,"
ISO 11344:2004 describes a method for the determination of the molecular mass, expressed as polystyrene, and the molecular-mass distribution of polymers produced in solution which are completely soluble in tetrahydrofuran (THF) and which have a molecular-mass range from 5 000 to 1 000 000.
It is Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11344:2004/Cor 1:2008 - **Identifier:** ISO 11344:2004/Cor 1:2008 _(verified: appears in the quote below)_ - **Item title:** Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11344:2016 - **Withdrawn / published date:** 2008-04-01 _(verified: appears in the quote below)_ > 51368,IS,Cor,ISO 11344:2004/Cor 1:2008,"Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography — Technical Corrigendum 1",Caoutchouc synthétique brut — Détermination de la répartition de la masse moléculaire pour les caoutchoucs polymérisés en solution par chromatographie par perméation de gel — Rectificatif technique 1,2008-04-01,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[63870],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11345:1997 - **Identifier:** ISO 11345:1997 _(verified: appears in the quote below)_ - **Item title:** Rubber — Assessment of carbon black dispersion — Rapid comparative methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11345:2006 - **Withdrawn / published date:** 1997-12-25 _(verified: appears in the quote below)_ > 19220,IS,,ISO 11345:1997,Rubber — Assessment of carbon black dispersion — Rapid comparative methods,Caoutchouc — Évaluation de la dispersion du noir de carbone — Méthodes comparatives rapides,1997-12-25,1,['83.060'],ISO/TC 45/SC 2,9599,,[40388],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11346:1997 - **Identifier:** ISO 11346:1997 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use from an Arrhenius plot _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11346:2004 - **Withdrawn / published date:** 1997-05-29 _(verified: appears in the quote below)_ > 19221,IS,,ISO 11346:1997,"Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use from an Arrhenius plot",Caoutchouc vulcanisé ou thermoplastique — Estimation de la durée de vie et de la température maximale d'utilisation au moyen d'un diagramme d'Arrhenius,1997-05-29,1,['83.060'],ISO/TC 45/SC 2,9599,,[36399],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11346:2004 - **Identifier:** ISO 11346:2004 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11346:2014 - **Withdrawn / published date:** 2004-01-19 _(verified: appears in the quote below)_ > 36399,IS,,ISO 11346:2004,"Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use",Caoutchouc vulcanisé ou thermoplastique — Estimation de la durée de vie et de la température maximale d'utilisation,2004-01-19,2,['83.060'],ISO/TC 45/SC 2,9599,[19221],[63438],"['en','fr']",9,"
ISO 11346:2004 specifies the principles and procedures for estimating the thermal endurance of rubbers from the results of exposure to elevated temperatures for long periods.
Two approaches are specified:
The estimation of thermal endurance is based solely on the change in selec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11346:2014 - **Identifier:** ISO 11346:2014 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11346:2023 - **Withdrawn / published date:** 2014-11-06 _(verified: appears in the quote below)_ > 63438,IS,,ISO 11346:2014,"Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use",Caoutchouc vulcanisé ou thermoplastique — Estimation de la durée de vie et de la température maximale d'utilisation,2014-11-06,3,['83.060'],ISO/TC 45/SC 2,9599,[36399],[80469],"['en','fr','ru']",10,"
ISO 11346:2014 specifies the principles and procedures for estimating the thermal endurance of rubbers from the results of exposure to elevated temperatures for long periods.
Two approaches are specified: one using the Arrhenius relation; the other using the WLF equation.
In ISO 11346:2014, the estimation of thermal endurance is based solely on the change in sele Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11347:2012 - **Identifier:** ISO 11347:2012 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Large yachts — Measurement and assessment of the visual appearance of coatings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11347:2024 - **Withdrawn / published date:** 2012-05-11 _(verified: appears in the quote below)_ > 50391,IS,,ISO 11347:2012,Ships and marine technology — Large yachts — Measurement and assessment of the visual appearance of coatings,Navires et technologie maritime — Grands yachts — Mesurage et évaluation de l'apparence visuelle des revêtements,2012-05-11,1,['47.040'],ISO/TC 8/SC 12,9599,,[82906],"['en','fr']",26,"
This International Standard specifies technical requirements for the measurement and assessment of the visual
appearance of the superficial coating of large yachts in terms of gloss, colour and any other superficial defects.
This International Standard is applicable to large yachts, of length, LH, as defined in ISO 8666, higher than or
equal to 24 m, a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11348-1:1998 - **Identifier:** ISO 11348-1:1998 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 1: Method using freshly prepared bacteria _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11348-1:2007 - **Withdrawn / published date:** 1998-12-17 _(verified: appears in the quote below)_ > 19308,IS,,ISO 11348-1:1998,Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 1: Method using freshly prepared bacteria,Qualité de l'eau — Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) — Partie 1: Méthode utilisant des bactéries fraîchement préparées,1998-12-17,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[40516],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11348-2:1998 - **Identifier:** ISO 11348-2:1998 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 2: Method using liquid-dried bacteria _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11348-2:2007 - **Withdrawn / published date:** 1998-12-17 _(verified: appears in the quote below)_ > 27223,IS,,ISO 11348-2:1998,Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 2: Method using liquid-dried bacteria,Qualité de l'eau — Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) — Partie 2: Méthode utilisant des bactéries déshydratées,1998-12-17,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[40517],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11348-3:1998 - **Identifier:** ISO 11348-3:1998 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 3: Method using freeze-dried bacteria _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11348-3:2007 - **Withdrawn / published date:** 1998-12-17 _(verified: appears in the quote below)_ > 27224,IS,,ISO 11348-3:1998,Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 3: Method using freeze-dried bacteria,Qualité de l'eau — Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) — Partie 3: Méthode utilisant des bactéries lyophilisées,1998-12-17,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[40518],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-1:1986 - **Identifier:** ISO 1135-1:1986 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and bottle caps _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-1:1987 - **Withdrawn / published date:** 1986-12-18 _(verified: appears in the quote below)_ > 5670,IS,,ISO 1135-1:1986,"Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and bottle caps","Matériel de transfusion à usage médical — Partie 1: Flacons de transfusion en verre, bouchons et capsules",1986-12-18,1,['11.040.20'],ISO/TC 76,9599,,[5671],"['en','fr']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135:1977 - **Identifier:** ISO 1135:1977 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8536-4:1987 | ISO 1135-1:1987 | ISO 1135-5:2015 | ISO 1135-3:1986 | ISO 1135-4:1987 - **Withdrawn / published date:** 1977-11-01 _(verified: appears in the quote below)_ > 5669,IS,,ISO 1135:1977,Transfusion equipment for medical use,Matériel de transfusion à usage médical,1977-11-01,1,['11.040.20'],ISO/TC 76,9599,,"[15782,5671,63426,5672,5673]","['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-3:1986 - **Identifier:** ISO 1135-3:1986 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 3: Blood-taking set _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-3:2016 - **Withdrawn / published date:** 1986-11-06 _(verified: appears in the quote below)_ > 5672,IS,,ISO 1135-3:1986,Transfusion equipment for medical use — Part 3: Blood-taking set,Matériel de transfusion à usage médical — Partie 3: Nécessaires pour prélèvement sanguin,1986-11-06,1,['11.040.20'],ISO/TC 76,9599,[5669],[66814],"['en','fr']",8,"
Specification of requirements for types of sterilized blood- taking sets for single use and for a single donor in order to ensure functional interchangeability of transfusion equipment. The materials and components of the sets are validated by various test methods selected by the manufacturer and, in addition, tests are provided for the release of lots of finished sets.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-4:1987 - **Identifier:** ISO 1135-4:1987 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 4: Transfusion sets for single use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-4:1998 - **Withdrawn / published date:** 1987-11-12 _(verified: appears in the quote below)_ > 5673,IS,,ISO 1135-4:1987,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils pour transfusion non réutilisables,1987-11-12,1,['11.040.20'],ISO/TC 76,9599,[5669],[21437],['en'],9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-4:1998 - **Identifier:** ISO 1135-4:1998 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 4: Transfusion sets for single use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-4:2004 - **Withdrawn / published date:** 1998-03-05 _(verified: appears in the quote below)_ > 21437,IS,,ISO 1135-4:1998,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils de transfusion non réutilisables,1998-03-05,2,['11.040.20'],ISO/TC 76,9599,[5673],[37615],"['en','fr']",20, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-4:2004 - **Identifier:** ISO 1135-4:2004 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 4: Transfusion sets for single use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-4:2010 - **Withdrawn / published date:** 2004-07-13 _(verified: appears in the quote below)_ > 37615,IS,,ISO 1135-4:2004,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils de transfusion non réutilisables,2004-07-13,3,['11.040.20'],ISO/TC 76,9599,[21437],[51478],['en'],16,"ISO 1135-4:2004 specifies requirements for single-use transfusion sets for medical use in order to ensure their compatibility with containers for blood and blood components as well as with intravenous equipment.
ISO 1135-4:2004 also specifies requirements for air-inlet devices for use with rigid containers for blood and blood components.
Secondary aims of ISO 1135-4:2004 are to provide guidance on specifications Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-4:2010 - **Identifier:** ISO 1135-4:2010 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 4: Transfusion sets for single use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-4:2012 - **Withdrawn / published date:** 2010-04-15 _(verified: appears in the quote below)_ > 51478,IS,,ISO 1135-4:2010,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils de transfusion non réutilisables,2010-04-15,4,['11.040.20'],ISO/TC 76,9599,[37615],[57822],"['en','fr']",15,"
ISO 1135‑4:2010 specifies requirements for single-use transfusion sets for medical use in order to ensure their compatibility with containers for blood and blood components as well as with intravenous equipment.
Secondary aims of ISO 1135‑4:2010 are to provide guidance on specifications relating to the quality and performance of materials used in transfusion sets and to present designations for transfusion set Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-4:2012 - **Identifier:** ISO 1135-4:2012 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 4: Transfusion sets for single use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-4:2015 | ISO 1135-5:2015 - **Withdrawn / published date:** 2012-02-24 _(verified: appears in the quote below)_ > 57822,IS,,ISO 1135-4:2012,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils de transfusion non réutilisables,2012-02-24,5,['11.040.20'],ISO/TC 76,9599,[51478],"[63425,63426]","['en','fr']",15,"
ISO 1135-4:2011 specifies requirements for single-use transfusion sets for medical use in order to ensure their compatibility with containers for blood and blood components as well as with intravenous equipment.
Secondary aims of ISO 1135-4:2011 are to provide guidance on specifications relating to the quality and performance of materials used in transfusion sets and to present designations for transfus Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-4:2015 - **Identifier:** ISO 1135-4:2015 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-4:2025 - **Withdrawn / published date:** 2015-11-30 _(verified: appears in the quote below)_ > 63425,IS,,ISO 1135-4:2015,"Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed",Matériel de transfusion à usage médical — Partie 4: Appareils de transfusion non réutilisables à alimentation par gravité,2015-11-30,6,['11.040.20'],ISO/TC 76,9599,[57822],[83959],"['en','fr']",16,"
ISO 1135-4:2015 specifies requirements for single use transfusion gravity sets for medical use in order to ensure their compatibility with containers for blood and blood components as well as with intravenous equipment.
Secondary aims of ISO 1135-4:2015 are to provide guidance on specifications relating to the quality and performance of materials used in transfusion se Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1135-5:2015 - **Identifier:** ISO 1135-5:2015 _(verified: appears in the quote below)_ - **Item title:** Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1135-5:2025 - **Withdrawn / published date:** 2015-11-30 _(verified: appears in the quote below)_ > 63426,IS,,ISO 1135-5:2015,Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus,Matériel de transfusion à usage médical — Partie 5: Appareils de transfusion non réutilisables avec les appareils de perfusion sous pression,2015-11-30,1,['11.040.20'],ISO/TC 76,9599,"[57822,5669]",[83963],"['en','fr']",20,"
ISO 1135-5:2015 specifies requirements for single use transfusion sets for use with pressure infusion equipment capable of generating pressures up to 200 kPa (2 bar). This International Standard ensures compatibility with containers for blood and blood components as well as intravenous equipment.
Secondary aims of ISO 1135-5:2 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11352:2012 - **Identifier:** ISO 11352:2012 _(verified: appears in the quote below)_ - **Item title:** Water quality — Estimation of measurement uncertainty based on validation and quality control data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11352:2025 - **Withdrawn / published date:** 2012-06-29 _(verified: appears in the quote below)_ > 50399,IS,,ISO 11352:2012,Water quality — Estimation of measurement uncertainty based on validation and quality control data,Qualité de l'eau — Estimation de l'incertitude de mesure basée sur des données de validation et de contrôle qualité,2012-06-29,1,['13.060.45'],ISO/TC 147/SC 2,9599,,[86833],"['en','fr','ru']",26,"
This International Standard specifies methods for the estimation of measurement uncertainty of chemical and
physicochemical methods in single laboratories based on validation data and analytical quality control results
obtained within the field of water analysis.
NOTE 1 The principles of the estimation of uncertainty specified in this International Standard Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-1:1997 - **Identifier:** ISO 11357-1:1997 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 11357-1 | ISO 11357-1:2009 - **Withdrawn / published date:** 1997-04-10 _(verified: appears in the quote below)_ > 19310,IS,,ISO 11357-1:1997,Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 1: Principes généraux,1997-04-10,1,['83.080.01'],ISO/TC 61/SC 5,9599,,"[30672,41637]","['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-1:2009 - **Identifier:** ISO 11357-1:2009 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-1:2016 - **Withdrawn / published date:** 2009-10-13 _(verified: appears in the quote below)_ > 41637,IS,,ISO 11357-1:2009,Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 1: Principes généraux,2009-10-13,2,['83.080.01'],ISO/TC 61/SC 5,9599,[19310],[70024],"['en','fr','ru']",31,"
ISO 11357 specifies several differential scanning calorimetry (DSC) methods for the thermal analysis of polymers and polymer blends, such as
ISO 11357-1:2016 specifies several differential scanning calorimetry (DSC) methods for the thermal analysis of polymers and polymer blends, such as
- thermoplastics (polymers, moulding compounds and other moulding materials, with or without fillers, fibres or reinforcements),
- thermosets (uncured or cured materials, with or without fillers, fibres or reinforcements), and
- elastomers Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-2:1999 - **Identifier:** ISO 11357-2:1999 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-2:2013 - **Withdrawn / published date:** 1999-03-25 _(verified: appears in the quote below)_ > 25545,IS,,ISO 11357-2:1999,Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 2: Détermination de la température de transition vitreuse,1999-03-25,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[57966],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-2:2013 - **Identifier:** ISO 11357-2:2013 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-2:2020 - **Withdrawn / published date:** 2013-04-15 _(verified: appears in the quote below)_ > 57966,IS,,ISO 11357-2:2013,Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 2: Détermination de la température de transition vitreuse et de la hauteur de palier de transition vitreuse,2013-04-15,2,['83.080.01'],ISO/TC 61/SC 5,9599,[25545],[77310],"['en','fr','ru']",6,
ISO 11357-2:2013 specifies methods for the determination of the glass transition temperature and the step height related to the glass transition of amorphous and partially crystalline plastics.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-3:1999 - **Identifier:** ISO 11357-3:1999 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-3:2011 - **Withdrawn / published date:** 1999-03-25 _(verified: appears in the quote below)_ > 25174,IS,,ISO 11357-3:1999,Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 3: Détermination de la température et de l'enthalpie de fusion et de cristallisation,1999-03-25,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[41638],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-3:1999/Amd 1:2005 - **Identifier:** ISO 11357-3:1999/Amd 1:2005 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-3:2011 - **Withdrawn / published date:** 2005-07-06 _(verified: appears in the quote below)_ > 40323,IS,Amd,ISO 11357-3:1999/Amd 1:2005,Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 3: Détermination de la température et de l'enthalpie de fusion et de cristallisation — Amendement 1,2005-07-06,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[41638],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-3:2011 - **Identifier:** ISO 11357-3:2011 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-3:2018 - **Withdrawn / published date:** 2011-04-28 _(verified: appears in the quote below)_ > 41638,IS,,ISO 11357-3:2011,Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 3: Détermination de la température et de l'enthalpie de fusion et de cristallisation,2011-04-28,2,['83.080.01'],ISO/TC 61/SC 5,9599,"[40323,25174]",[72460],"['en','fr']",6,ISO 11357-3:2011 specifies a method for the determination of the temperatures and enthalpies of melting and crystallization of crystalline or partially crystalline plastics.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-3:2018 - **Identifier:** ISO 11357-3:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-3:2025 - **Withdrawn / published date:** 2018-03-16 _(verified: appears in the quote below)_ > 72460,IS,,ISO 11357-3:2018,Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 3: Détermination de la température et de l'enthalpie de fusion et de cristallisation,2018-03-16,3,['83.080.01'],ISO/TC 61/SC 5,9599,[41638],[88106],"['en','fr']",6,ISO 11357-3:2018 specifies a method for the determination of the temperatures and enthalpies of melting and crystallization of crystalline or partially crystalline plastics.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-4:2005 - **Identifier:** ISO 11357-4:2005 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-4:2014 - **Withdrawn / published date:** 2005-09-20 _(verified: appears in the quote below)_ > 38252,IS,,ISO 11357-4:2005,Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 4: Détermination de la capacité thermique massique,2005-09-20,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[65087],"['en','fr']",10,ISO 11357-4:2005 specifies methods for determining the specific heat capacity of plastics by differential scanning calorimetry.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-4:2014 - **Identifier:** ISO 11357-4:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-4:2021 - **Withdrawn / published date:** 2014-06-06 _(verified: appears in the quote below)_ > 65087,IS,,ISO 11357-4:2014,Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 4: Détermination de la capacité thermique massique,2014-06-06,2,['83.080.01'],ISO/TC 61/SC 5,9599,[38252],[79998],"['en','fr']",12,ISO 11357-4:2014 specifies methods for determining the specific heat capacity of plastics by differential scanning calorimetry.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-5:1999 - **Identifier:** ISO 11357-5:1999 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-5:2013 - **Withdrawn / published date:** 1999-12-02 _(verified: appears in the quote below)_ > 27143,IS,,ISO 11357-5:1999,"Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion","Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 5: Détermination des températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de réaction et du degré de transformation",1999-12-02,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[57967],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-5:2013 - **Identifier:** ISO 11357-5:2013 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-5:2025 - **Withdrawn / published date:** 2013-03-15 _(verified: appears in the quote below)_ > 57967,IS,,ISO 11357-5:2013,"Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion","Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 5: Détermination des températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de réaction et du degré de transformation",2013-03-15,2,['83.080.01'],ISO/TC 61/SC 5,9599,[27143],[88107],"['en','fr','ru']",10,"ISO 11357-5:2013 specifies a method for the determination of reaction temperatures and times, enthalpies of reaction, and degrees of conversion using differential scanning calorimetry (DSC).
27144,IS,,ISO 11357-6:2002,Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 6: Détermination du temps d'induction à l'oxydation,2002-06-06,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[42718],['en'],9,"This part of ISO 11357 specifies a method for the determination of the oxidation-induction time (OIT) of polymeric materials by differential scanning calorimetry (DSC). It is applicable to polyolefin resins that are in a fully stabilized/compounded form, either as raw materials or as finished products. It may be applicable to other plastics.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-6:2002/Amd 1:2007 - **Identifier:** ISO 11357-6:2002/Amd 1:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-6:2008 - **Withdrawn / published date:** 2007-01-15 _(verified: appears in the quote below)_ > 42631,IS,Amd,ISO 11357-6:2002/Amd 1:2007,Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time — Amendment 1,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 6: Détermination du temps d'induction à l'oxydation — Amendement 1,2007-01-15,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[42718],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-6:2008 - **Identifier:** ISO 11357-6:2008 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-6:2018 - **Withdrawn / published date:** 2008-06-10 _(verified: appears in the quote below)_ > 42718,IS,,ISO 11357-6:2008,Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT),Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 6: Détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique),2008-06-10,2,['83.080.01'],ISO/TC 61/SC 5,9599,"[42631,27144,18873]",[72461],"['en','fr']",12,"ISO 11357-6:2008 specifies methods for the determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) of polymeric materials by means of differential scanning Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-6:2018 - **Identifier:** ISO 11357-6:2018 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-6:2025 - **Withdrawn / published date:** 2018-03-09 _(verified: appears in the quote below)_ > 72461,IS,,ISO 11357-6:2018,Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT),Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 6: Détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique),2018-03-09,3,['83.080.01'],ISO/TC 61/SC 5,9599,[42718],[88108],"['en','fr']",12,"
ISO 11357-6:2018 specifies methods for the determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) of polymeric materials by means of differential scanning calorimetry ( Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-7:2002 - **Identifier:** ISO 11357-7:2002 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-7:2015 | ISO/WD 11357-7 - **Withdrawn / published date:** 2002-06-06 _(verified: appears in the quote below)_ > 27145,IS,,ISO 11357-7:2002,Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 7: Détermination de la cinétique de cristallisation,2002-06-06,1,['83.080.01'],ISO/TC 61/SC 5,9599,,"[61654,41661]","['en','fr']",11,"
This part of ISO 11357 specifies two methods, isothermal and non-isothermal, for studying the crystallization kinetics of partially crystalline polymers using differential scanning calorimetry (DSC).
It is only applicable to melted polymers.
NOTE These methods are not suitable if the molecular structure of the polymer is modified during the test.
" 2 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11357-7:2015 - **Identifier:** ISO 11357-7:2015 _(verified: appears in the quote below)_ - **Item title:** Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11357-7:2022 - **Withdrawn / published date:** 2015-08-10 _(verified: appears in the quote below)_ > 61654,IS,,ISO 11357-7:2015,Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics,Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 7: Détermination de la cinétique de cristallisation,2015-08-10,2,['83.080.01'],ISO/TC 61/SC 5,9599,[27145],[81832],"['en','fr']",12,ISO 11357-7:2015 specifies two methods (isothermal and non-isothermal) for studying the crystallization kinetics of partially crystalline polymers using differential scanning calorimetry (DSC).
It is only applicable to molten polymers.
NOTE These methods are not suitable if the molecular structure of the polymer is modified during the test.
6 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 11358-1:2014 - **Identifier:** ISO 11358-1:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11358-1:2022 - **Withdrawn / published date:** 2014-07-14 _(verified: appears in the quote below)_ > 59710,IS,,ISO 11358-1:2014,Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles,Plastiques — Thermogravimétrie (TG) des polymères — Partie 1: Principes généraux,2014-07-14,1,['83.080.01'],ISO/TC 61/SC 5,9599,[19311],[79999],"['en','fr','ru']",9,"ISO 11358-1:2014 specifies general conditions for the analysis of polymers using thermogravimetric techniques. It is applicable to liquids or solids. Solid materials may be in the form of pellets, granules or powders. Fabricated shapes reduced to appropriate specimen size may also be analysed by this method.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 18](https://referencesource.org/iso-standard-supersessions/p/18/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 20](https://referencesource.org/iso-standard-supersessions/p/20/) Last verified: 2026-08-05. Review by: 2027-02-02.