ISO 9612:2009 specifies an engineering method for measuring workers' exposure to noise in a working environment and calculating the noise exposure level. ISO 9612:2009 deals with A-weighted levels but is applicable also to C-weighted levels. Three different strategies for measurement are specified. The method is useful where a determination of noise exposure to engineering grade is required, e.g. for detailed noise exp Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9613-2:1996 - **Identifier:** ISO 9613-2:1996 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9613-2:2024 - **Withdrawn / published date:** 1996-12-05 _(verified: appears in the quote below)_ > 20649,IS,,ISO 9613-2:1996,Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation,Acoustique — Atténuation du son lors de sa propagation à l'air libre — Partie 2: Méthode générale de calcul,1996-12-05,1,['17.140.01'],ISO/TC 43/SC 1,9599,,[74047],"['en','fr']",18,
Describes a method for calculating the attenuation of sound during propagation outdoors in order to predict the levels of environmental noise at a distance from a variety of sources. The method predicts the equivalent continuous A-weighted sound pressure level (as described in ISO 1996) under meteorological conditions.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9618:1996 - **Identifier:** ISO 9618:1996 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 - **Successor:** ISO 9618:2016 - **Withdrawn / published date:** 1996-12-26 > 17431,IS,,ISO 9618:1996,"Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions","Aéronautique et espace — Écrous hexagonaux à créneaux, hauteur réduite, surplats normaux, à filet Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9622:1999 - **Identifier:** ISO 9622:1999 _(verified: appears in the quote below)_ - **Item title:** Whole milk — Determination of milkfat, protein and lactose content — Guidance on the operation of mid-infrared instruments _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9622:2013 - **Withdrawn / published date:** 1999-11-18 _(verified: appears in the quote below)_ > 17436,IS,,ISO 9622:1999,"Whole milk — Determination of milkfat, protein and lactose content — Guidance on the operation of mid-infrared instruments","Lait entier — Détermination des teneurs en matière grasse laitière, en protéines et en lactose — Lignes directrices pour l'utilisation des appareils de dosage par absorption dans le moyen infrarouge",1999-11-18,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[56874],"['en','fr']",27, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9624:1997 - **Identifier:** ISO 9624:1997 _(verified: appears in the quote below)_ - **Item title:** Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 9624 | ISO 9624:2019 - **Withdrawn / published date:** 1997-02-13 _(verified: appears in the quote below)_ > 17438,IS,,ISO 9624:1997,Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges,Tubes en matières thermoplastiques destinés à la pression — Dimensions des collets et dimensions de raccordement des brides folles plates,1997-02-13,1,['23.040.60'],ISO/TC 138/SC 2,9599,,"[54947,67984]","['en','fr']",7,Gives the mating dimensions of flange adaptors of thermoplastic materials and the coresponding dimensions of loose backing flanges to be used for thermoplastic pipes under pressure.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9626:1991 - **Identifier:** ISO 9626:1991 _(verified: appears in the quote below)_ - **Item title:** Stainless steel needle tubing for the manufacture of medical devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9626:2016 - **Withdrawn / published date:** 1991-08-22 _(verified: appears in the quote below)_ > 17440,IS,,ISO 9626:1991,Stainless steel needle tubing for the manufacture of medical devices,Tubes d'aiguilles en acier inoxydable pour la fabrication de matériel médical,1991-08-22,1,['11.040.25'],ISO/TC 84,9599,,[60480],"['en','fr']",9,"Specifies the dimensions, surface and mechanical properties of normal- and thin-walled tubing of designated metric sizes 3,4 mm to 0,3 mm, and of extra-thin-walled tubing of designated metric sizes 2,1 mm to 0,6 mm.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9626:1991/Amd 1:2001 - **Identifier:** ISO 9626:1991/Amd 1:2001 _(verified: appears in the quote below)_ - **Item title:** Stainless steel needle tubing for the manufacture of medical devices — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9626:2016 - **Withdrawn / published date:** 2001-06-28 _(verified: appears in the quote below)_ > 30434,IS,Amd,ISO 9626:1991/Amd 1:2001,Stainless steel needle tubing for the manufacture of medical devices — Amendment 1,Tubes d'aiguilles en acier inoxydable pour la fabrication de matériel médical — Amendement 1,2001-06-28,1,['11.040.25'],ISO/TC 84,9599,,[60480],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9628:1992 - **Identifier:** ISO 9628:1992 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Insert bearings and eccentric locking collars _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 9628 | ISO 9628:2006 - **Withdrawn / published date:** 1992-12-30 _(verified: appears in the quote below)_ > 17442,IS,,ISO 9628:1992,Rolling bearings — Insert bearings and eccentric locking collars,Roulements — Roulements 'insert' et bagues de blocage excentriques,1992-12-30,1,['21.100.20'],ISO/TC 4/SC 6,9599,"[7081,8316]","[29707,40244]","['en','fr']",12,"Specifies the characteristics, boundary dimensions (in mm and in), tolerances and radial internal clearances.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9628:2006 - **Identifier:** ISO 9628:2006 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 9628 | ISO 9628:2019 - **Withdrawn / published date:** 2006-03-29 _(verified: appears in the quote below)_ > 40244,IS,,ISO 9628:2006,Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances,Roulements — Roulements 'insert' et bagues de blocage excentriques — Dimensions d'encombrement et tolérances,2006-03-29,2,['21.100.20'],ISO/TC 4/SC 6,9599,[17442],"[69424,74813]","['en','fr']",19,"ISO 9628:2006 specifies the characteristics, boundary dimensions and tolerances of insert bearings and eccentric locking collars and the radial internal clearances of insert bearings.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9628:2006/Amd 1:2011 - **Identifier:** ISO 9628:2006/Amd 1:2011 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances — Amendment 1: Diameter series 3 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 9628 | ISO 9628:2019 - **Withdrawn / published date:** 2011-02-23 _(verified: appears in the quote below)_ > 51591,IS,Amd,ISO 9628:2006/Amd 1:2011,Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances — Amendment 1: Diameter series 3,Roulements — Roulements 'insert' et bagues de blocage excentriques — Dimensions d'encombrement et tolérances — Amendement 1: Série de diamètres 3,2011-02-23,2,['21.100.20'],ISO/TC 4/SC 6,9599,,"[69424,74813]","['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9631:1991 - **Identifier:** ISO 9631:1991 _(verified: appears in the quote below)_ - **Item title:** Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9631:2003 - **Withdrawn / published date:** 1991-12-12 _(verified: appears in the quote below)_ > 17445,IS,,ISO 9631:1991,Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material,Joints étanches en caoutchouc — Garnitures d'étanchéité destinées aux joints de canalisations pour la fourniture d'eau chaude jusqu'à 110 degrés C — Spécifications pour les matériaux,1991-12-12,1,"['83.140.50','91.140.60']",ISO/TC 45/SC 4,9599,,[37163],"['en','fr']",6,"Specifies requirements for materials used in vulcanized, solid rubber joint rings. Does not apply to joint rings made from cellular rubber materials or with enclosed voids as part of their design.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9631:2003 - **Identifier:** ISO 9631:2003 _(verified: appears in the quote below)_ - **Item title:** Rubber seals — Joint rings for pipelines for hot-water supply up to 110 degrees C — Specification for the material _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9631:2018 - **Withdrawn / published date:** 2003-12-11 _(verified: appears in the quote below)_ > 37163,IS,,ISO 9631:2003,Rubber seals — Joint rings for pipelines for hot-water supply up to 110 degrees C — Specification for the material,Joints étanches en caoutchouc — Garnitures d'étanchéité destinées aux joints de canalisations pour la fourniture d'eau chaude jusqu'à 110 degrés C — Spécifications pour les matériaux,2003-12-11,2,['83.140.50'],ISO/TC 45/SC 4,9599,[17445],[65593],['en'],12,"ISO 9631:2003 specifies requirements for materials used in vulcanized-rubber seals for hot potable and non-potable water supply (up to 110 °C).
The different seal designations specified are defined according to seal type, seal application and the requirements for a particular seal.
Genera Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9633:1992 - **Identifier:** ISO 9633:1992 _(verified: appears in the quote below)_ - **Item title:** Cycle chains — Characteristics and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9633:2001 - **Withdrawn / published date:** 1992-07-09 _(verified: appears in the quote below)_ > 17447,IS,,ISO 9633:1992,Cycle chains — Characteristics and test methods,Chaînes pour cycles — Caractéristiques et méthodes de contrôle,1992-07-09,1,['43.150'],ISO/TC 100,9599,,[23532],"['en','fr']",9,"
Specifies the dimensions and mechanical properties (minimum tensile strength, twist, lateral deviation, stiff link and side bow). Also describes test methods for determining these mechanical properties. The dimensions of chain wheels are specified in ISO 606. Annex A gives examples of calculation of the twist value.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9635-1:2006 - **Identifier:** ISO 9635-1:2006 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9635-1:2014 - **Withdrawn / published date:** 2006-11-20 _(verified: appears in the quote below)_ > 39764,IS,,ISO 9635-1:2006,Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 1: Exigences générales,2006-11-20,1,['65.060.35'],ISO/TC 23/SC 18,9599,[17449],[61212],['en'],24,"ISO 9635-1:2006 specifies construction and performance requirements and test methods for valves, intended for operation in irrigation systems with water at temperatures not exceeding 60 °C, which can contain fertilizers and other chemicals of the types and concentrations used in agriculture. It is applicable to irrigation valves of 15 mm diameter or greater, designed to operate in the fully open and fully closed positions, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9635:1990 - **Identifier:** ISO 9635:1990 _(verified: appears in the quote below)_ - **Item title:** Irrigation equipment — Hydraulically operated irrigation valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9635-4:2006 | ISO 9635-1:2006 | ISO 9635-5:2006 | ISO 9635-3:2006 | ISO 9635-2:2006 - **Withdrawn / published date:** 1990-11-22 _(verified: appears in the quote below)_ > 17449,IS,,ISO 9635:1990,Irrigation equipment — Hydraulically operated irrigation valves,Matériel d'irrigation — Vannes à commande hydraulique,1990-11-22,1,['65.060.35'],ISO/TC 23/SC 18,9599,,"[41121,39764,41122,41123,41119]","['en','fr']",6,"
Specifies construction and performance requirements and test methods for valves, intended for operation in irrigation systems, with water at temperatures not exceeding 50 °C, which may contain fertilizers and chemicals of the types and concentration used in agriculture. Applies to valves of 15 mm diameter or greater.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9635-2:2006 - **Identifier:** ISO 9635-2:2006 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9635-2:2014 - **Withdrawn / published date:** 2006-11-20 _(verified: appears in the quote below)_ > 41119,IS,,ISO 9635-2:2006,Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 2: Vannes d'isolation,2006-11-20,1,['65.060.35'],ISO/TC 23/SC 18,9599,[17449],[61213],['en'],15,"ISO 9635-2:2006 specifies construction and performance requirements and test methods for isolating valves, intended for operation in irrigation systems with water at temperatures not exceeding 60 °C, which can contain fertilizers and other chemicals of the types and concentrations used in agriculture. It is applicable to hydraulically operated isolating irrigation valves of DN 8 (1/4 inch) diameter or greater, designed to opera Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9635-3:2006 - **Identifier:** ISO 9635-3:2006 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9635-3:2014 - **Withdrawn / published date:** 2006-11-23 _(verified: appears in the quote below)_ > 41123,IS,,ISO 9635-3:2006,Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 3: Clapets antiretour,2006-11-23,1,['65.060.35'],ISO/TC 23/SC 18,9599,"[17449,17850]",[61214],['en'],7,"
ISO 9635-3:2006 specifies construction and performance requirements and test methods for check valves, intended for operation in irrigation systems with water at temperatures not exceeding 60 °C, which can contain fertilizers and other chemicals of the types and concentrations used in agriculture. It is applicable to hydraulically operated check irrigation valves of DN 15 (1/2 inch) diameter or greater, designed to operate i Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9635-4:2006 - **Identifier:** ISO 9635-4:2006 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9635-4:2014 - **Withdrawn / published date:** 2006-11-20 _(verified: appears in the quote below)_ > 41121,IS,,ISO 9635-4:2006,Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 4: Vannes de purge d'air,2006-11-20,1,['65.060.35'],ISO/TC 23/SC 18,9599,"[19359,17449]",[61215],['en'],11,"
ISO 9635-4:2006 specifies construction and performance requirements and test methods for air valves, intended for operation in irrigation systems with water at temperatures not exceeding 60 °C, which can contain fertilizers and other chemicals of the types and concentrations used in agriculture. It is applicable to hydraulically operated air irrigation valves of DN 15 (1/2 inch) diameter or greater, designed to be directly Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9635-5:2006 - **Identifier:** ISO 9635-5:2006 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9635-5:2014 - **Withdrawn / published date:** 2006-11-20 _(verified: appears in the quote below)_ > 41122,IS,,ISO 9635-5:2006,Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 5: Vannes de contrôle,2006-11-20,1,['65.060.35'],ISO/TC 23/SC 18,9599,[17449],[60580],['en'],11,"
ISO 9635-5:2006 specifies construction and performance requirements and test methods for control valves, intended for operation in irrigation systems with water at temperatures not exceeding 60 °C, which can contain fertilizers and other chemicals of the types and concentrations used in agriculture. It is applicable to hydraulically operated control irrigation valves of DN 15 (1/2 inch) diameter or greater, designed to operate in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9642:1993 - **Identifier:** ISO 9642:1993 _(verified: appears in the quote below)_ - **Item title:** Cinematography — Time and control code for 24, 25 and 30 frames per second motion-picture systems — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9642:2020 - **Withdrawn / published date:** 1993-08-12 _(verified: appears in the quote below)_ > 17469,IS,,ISO 9642:1993,"Cinematography — Time and control code for 24, 25 and 30 frames per second motion-picture systems — Specifications","Cinématographie — Code de chronométrage et de commande pour les systèmes cinématographiques à 24, 25 et 30 images par seconde — Spécifications",1993-08-12,1,['37.060.10'],ISO/TC 36,9599,,[74444],['en'],10,"
Specifies digital code formats and modulation methods for motion-picture film to be used for timing, control, editing and synchronization purposes. Also specifies the relationship of the codes to the motion-picture frame. Two types of code are described: type C (a continuous code very similar to the continuous code specified in IEC 461) for film m Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9644:1993 - **Identifier:** ISO 9644:1993 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9644:2008 - **Withdrawn / published date:** 1993-02-04 _(verified: appears in the quote below)_ > 17470,IS,,ISO 9644:1993,Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method,Matériel agricole d'irrigation — Pertes de pression dans les vannes d'irrigation — Méthode d'essai,1993-02-04,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[43992],"['en','fr']",6,
Specifies a test method under steady-state conditions when water flows through the valves. Also describes the method of reporting pertinent test data. The valve performance specifications presented are of such scope and accuracy as to assist irrigation system designers when comparing pressure losses through various types of irrigation valves. The measurement of pressure losses provides a means for determining t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9644:1993/Amd 1:1998 - **Identifier:** ISO 9644:1993/Amd 1:1998 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9644:2008 - **Withdrawn / published date:** 1998-08-13 _(verified: appears in the quote below)_ > 26519,IS,Amd,ISO 9644:1993/Amd 1:1998,Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method — Amendment 1,Matériel agricole d'irrigation — Pertes de pression dans les vannes d'irrigation — Méthode d'essai — Amendement 1,1998-08-13,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[43992],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9644:2008 - **Identifier:** ISO 9644:2008 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9644:2018 - **Withdrawn / published date:** 2008-07-08 _(verified: appears in the quote below)_ > 43992,IS,,ISO 9644:2008,Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method,Matériel agricole d'irrigation — Pertes de pression dans les vannes d'irrigation — Méthode d'essai,2008-07-08,2,['65.060.35'],ISO/TC 23/SC 18,9599,"[26519,17470]",[68847],['en'],11,
ISO 9644:2008 specifies a test method for determining the pressure loss in agricultural irrigation valves under steady-state conditions when water flows through them. The scope and accuracy of the valve performance specifications presented will assist agricultural irrigation system designers in comparing pressure losses through various types of valves.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9647:1989 - **Identifier:** ISO 9647:1989 _(verified: appears in the quote below)_ - **Item title:** Steel and iron — Determination of vanadium content — Flame atomic absorption spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9647:2020 - **Withdrawn / published date:** 1989-06-29 _(verified: appears in the quote below)_ > 17486,IS,,ISO 9647:1989,Steel and iron — Determination of vanadium content — Flame atomic absorption spectrometric method,Aciers et fontes — Dosage du vanadium — Méthode par spectrométrie d'absorption atomique dans la flamme,1989-06-29,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[76052],"['en','fr']",8,"The method is applicable to vandadium contents between 0,005 % (m/m) and 1,0 % (m/m), provided that the tungsten content in the test portion is not higher than 10 mg and/or the titanium content is not higher than 5 mg. Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. The annexes give additional information on the international co-operative test Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9649:1990 - **Identifier:** ISO 9649:1990 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Wire — Reverse torsion test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9649:2016 - **Withdrawn / published date:** 1990-02-22 _(verified: appears in the quote below)_ > 17488,IS,,ISO 9649:1990,Metallic materials — Wire — Reverse torsion test,Matériaux métalliques — Fils — Essai de torsion alternée,1990-02-22,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[61814],"['en','fr']",2,"
Specifies a method for determining the ability of wire of diameter 0,3 mm to 10,0 mm inclusive to undergo plastic deformation during reverse torsion. This test is used for detecting surface and internal defects in wires. Gives symbols and designations, principle, testing machine, test piece, procedure and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9649:2016 - **Identifier:** ISO 9649:2016 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Wire — Reverse torsion test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9649:2023 - **Withdrawn / published date:** 2016-05-03 _(verified: appears in the quote below)_ > 61814,IS,,ISO 9649:2016,Metallic materials — Wire — Reverse torsion test,Matériaux métalliques — Fils — Essai de torsion alternée,2016-05-03,2,['77.040.10'],ISO/TC 164/SC 2,9599,[17488],[83867],['en'],4,"ISO 9649:2016 specifies a method for determining the ability of metallic wire of diameter dimension from 0,3 mm to 10,0 mm inclusive to undergo plastic deformation during reverse torsion. This test is used to detect surface defects, as well as to assess ductility.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-1:1980 - **Identifier:** ISO 965-1:1980 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-1:1998 - **Withdrawn / published date:** 1980-09-01 _(verified: appears in the quote below)_ > 5392,IS,,ISO 965-1:1980,ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data,Filetages métriques ISO pour usages généraux — Tolérances — Partie 1: Principes et données fondamentales,1980-09-01,2,['21.040.10'],ISO/TC 1,9599,,[5393],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-1:1998 - **Identifier:** ISO 965-1:1998 _(verified: appears in the quote below)_ - **Item title:** ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-1:2013 | ISO/NP 965-1 - **Withdrawn / published date:** 1998-12-20 _(verified: appears in the quote below)_ > 5393,IS,,ISO 965-1:1998,ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data,Filetages métriques ISO pour usages généraux — Tolérances — Partie 1: Principes et données fondamentales,1998-12-20,3,['21.040.10'],ISO/TC 1,9599,[5392],"[57778,55991]","['en','fr']",18, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-1:1998/Cor 1:2009 - **Identifier:** ISO 965-1:1998/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-1:2013 | ISO/NP 965-1 - **Withdrawn / published date:** 2009-07-13 _(verified: appears in the quote below)_ > 54554,IS,Cor,ISO 965-1:1998/Cor 1:2009,ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Technical Corrigendum 1,Filetages métriques ISO pour usages généraux — Tolérances — Partie 1: Principes et données fondamentales — Rectificatif technique 1,2009-07-13,3,['21.040.10'],ISO/TC 1,9599,,"[57778,55991]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-1:2013 - **Identifier:** ISO 965-1:2013 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-1:2026 - **Withdrawn / published date:** 2013-09-13 _(verified: appears in the quote below)_ > 57778,IS,,ISO 965-1:2013,ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data,Filetages métriques ISO pour usages généraux — Tolérances — Partie 1: Principes et données fondamentales,2013-09-13,4,['21.040.10'],ISO/TC 1,9599,"[5393,54554]",[87889],"['en','fr','ru']",20,ISO 965-1:2013 specifies a tolerance system for ISO general purpose metric screw threads (M) conforming to ISO 261. The tolerance system refers to the basic profile according to ISO 68-1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-1:2013/Amd 1:2021 - **Identifier:** ISO 965-1:2013/Amd 1:2021 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-1:2026 - **Withdrawn / published date:** 2021-09-29 _(verified: appears in the quote below)_ > 80920,IS,Amd,ISO 965-1:2013/Amd 1:2021,ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1,Filetages métriques ISO pour usages généraux — Tolérances — Partie 1: Principes et données fondamentales — Amendement 1,2021-09-29,4,['21.040.10'],ISO/TC 1,9599,,[87889],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-2:1980 - **Identifier:** ISO 965-2:1980 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose bolt and nut threads — Medium quality _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-2:1998 - **Withdrawn / published date:** 1980-09-01 _(verified: appears in the quote below)_ > 5395,IS,,ISO 965-2:1980,ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose bolt and nut threads — Medium quality,Filetages métriques ISO pour usages généraux — Tolérances — Partie 2: Dimensions limites pour la boulonnerie d'usage courant — Qualité moyenne,1980-09-01,2,['21.040.10'],ISO/TC 1,9599,,[23594],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-2:1998 - **Identifier:** ISO 965-2:1998 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-2:2024 - **Withdrawn / published date:** 1998-12-20 _(verified: appears in the quote below)_ > 23594,IS,,ISO 965-2:1998,ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality,Filetages métriques ISO pour usages généraux — Tolérances — Partie 2: Dimensions limites pour filetages intérieurs et extérieurs d'usages généraux — Qualité moyenne,1998-12-20,3,['21.040.10'],ISO/TC 1,9599,[5395],[87890],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-2:1998/Amd 1:2021 - **Identifier:** ISO 965-2:1998/Amd 1:2021 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-2:2024 - **Withdrawn / published date:** 2021-07-06 _(verified: appears in the quote below)_ > 80921,IS,Amd,ISO 965-2:1998/Amd 1:2021,ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality — Amendment 1,Filetages métriques ISO pour usages généraux — Tolérances — Partie 2: Dimensions limites pour filetages intérieurs et extérieurs d'usages généraux — Qualité moyenne — Amendement 1,2021-07-06,3,['21.040.10'],ISO/TC 1,9599,,[87890],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-3:1980 - **Identifier:** ISO 965-3:1980 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional threads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-3:1998 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 5396,IS,,ISO 965-3:1980,ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional threads,Filetages métriques ISO pour usages généraux — Tolérances — Partie 3: Écarts pour filetages de construction,1980-10-01,2,['21.040.10'],ISO/TC 1,9599,,[5397],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-3:1998 - **Identifier:** ISO 965-3:1998 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-3:2021 - **Withdrawn / published date:** 1998-12-20 _(verified: appears in the quote below)_ > 5397,IS,,ISO 965-3:1998,ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads,Filetages métriques ISO pour usages généraux — Tolérances — Partie 3: Écarts pour filetages de construction,1998-12-20,3,['21.040.10'],ISO/TC 1,9599,[5396],[80922],"['en','fr']",16,This part of ISO 965 specifies deviations for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to ISO 261 having basic profile according to ISO 68-1.
The deviations specified are derived from the fundamental deviations and tolerances specified in ISO 965-1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-3:1998/Cor 1:2009 - **Identifier:** ISO 965-3:1998/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-3:2021 - **Withdrawn / published date:** 2009-07-13 _(verified: appears in the quote below)_ > 54555,IS,Cor,ISO 965-3:1998/Cor 1:2009,ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads — Technical Corrigendum 1,Filetages métriques ISO pour usages généraux — Tolérances — Partie 3: Écarts pour filetages de construction — Rectificatif technique 1,2009-07-13,3,['21.040.10'],ISO/TC 1,9599,,[80922],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-4:1998 - **Identifier:** ISO 965-4:1998 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-4:2021 - **Withdrawn / published date:** 1998-12-20 _(verified: appears in the quote below)_ > 5398,IS,,ISO 965-4:1998,ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing,Filetages métriques ISO pour usages généraux — Tolérances — Partie 4: Dimensions limites pour filetages extérieurs galvanisés à chaud pour assemblages avec des filetages intérieurs de position de tolérance H ou G après galvanisation,1998-12-20,1,['21.040.10'],ISO/TC 1,9599,,[80923],"['en','fr']",4,This part of ISO 965 specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric external screw threads conforming Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-4:2021 - **Identifier:** ISO 965-4:2021 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-4:2025 - **Withdrawn / published date:** 2021-07-06 _(verified: appears in the quote below)_ > 80923,IS,,ISO 965-4:2021,ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing,Filetages métriques ISO pour usages généraux — Tolérances — Partie 4: Dimensions limites pour filetages extérieurs galvanisés à chaud pour assemblages avec des filetages intérieurs de position de tolérance H ou G après galvanisation,2021-07-06,2,['21.040.10'],ISO/TC 1,9599,[5398],[87891],"['en','fr']",5,
This document specifies limit deviations and limits of sizes for the pitch and crest diameters of the hot-dip galvanized metric external screw thread Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-5:1998 - **Identifier:** ISO 965-5:1998 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-5:2025 - **Withdrawn / published date:** 1998-12-20 _(verified: appears in the quote below)_ > 5399,IS,,ISO 965-5:1998,ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing,Filetages métriques ISO pour usages généraux — Tolérances — Partie 5: Dimensions limites pour filetages intérieurs pour assemblages avec des filetages extérieurs galvanisés à chaud de position de tolérance maximale h avant galvanisation,1998-12-20,1,['21.040.10'],ISO/TC 1,9599,,[87892],"['en','fr']",5,
This part of ISO 965 specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric internal screw threads c Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 965-5:1998/Amd 1:2021 - **Identifier:** ISO 965-5:1998/Amd 1:2021 _(verified: appears in the quote below)_ - **Item title:** ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 965-5:2025 - **Withdrawn / published date:** 2021-07-06 _(verified: appears in the quote below)_ > 80924,IS,Amd,ISO 965-5:1998/Amd 1:2021,ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing — Amendment 1,Filetages métriques ISO pour usages généraux — Tolérances — Partie 5: Dimensions limites pour filetages intérieurs pour assemblages avec des filetages extérieurs galvanisés à chaud de position de tolérance maximale h avant galvanisation — Amendement 1,2021-07-06,1,['21.040.10'],ISO/TC 1,9599,,[87892],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9650-1:2005 - **Identifier:** ISO 9650-1:2005 _(verified: appears in the quote below)_ - **Item title:** Small craft — Inflatable liferafts — Part 1: Type I _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/AWI 9650-1 | ISO 9650-1:2022 - **Withdrawn / published date:** 2005-03-02 _(verified: appears in the quote below)_ > 37478,IS,,ISO 9650-1:2005,Small craft — Inflatable liferafts — Part 1: Type I,Petits navires — Radeaux de survie gonflables — Partie 1: Type I,2005-03-02,1,['47.080'],ISO/TC 188,9599,,"[76637,80963]","['en','fr']",20,"
ISO 9650-1:2005 specifies the design, performance and marking characteristics, and gives the test methods for inflatable liferafts of Type I.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9650-2:2005 - **Identifier:** ISO 9650-2:2005 _(verified: appears in the quote below)_ - **Item title:** Small craft — Inflatable liferafts — Part 2: Type II _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/AWI 9650-2 | ISO 9650-1:2022 - **Withdrawn / published date:** 2005-03-02 _(verified: appears in the quote below)_ > 37479,IS,,ISO 9650-2:2005,Small craft — Inflatable liferafts — Part 2: Type II,Petits navires — Radeaux de survie gonflables — Partie 2: Type II,2005-03-02,1,['47.080'],ISO/TC 188,9599,,"[76638,80963]","['en','fr']",19,"ISO 9650-2:2005 specifies the design, performance and marking characteristics, and gives the test methods for inflatable liferafts of Type II:
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9650-3:2005 - **Identifier:** ISO 9650-3:2005 _(verified: appears in the quote below)_ - **Item title:** Small craft — Inflatable liferafts — Part 3: Material _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9650-3:2009 - **Withdrawn / published date:** 2005-03-02 _(verified: appears in the quote below)_ > 37480,IS,,ISO 9650-3:2005,Small craft — Inflatable liferafts — Part 3: Material,Petits navires — Radeaux de survie gonflables — Partie 3: Matériaux,2005-03-02,1,['47.080'],ISO/TC 188,9599,,[45643],"['en','fr']",5,ISO 9650-3:2005 specifies requirements and test methods for the materials used in the construction of the inflatable liferafts specified in ISO 9650-1 and ISO 9650-2.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9653:1991 - **Identifier:** ISO 9653:1991 _(verified: appears in the quote below)_ - **Item title:** Adhesives — Test method for shear impact strength of adhesive bonds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9653:1998 - **Withdrawn / published date:** 1991-12-12 _(verified: appears in the quote below)_ > 17498,IS,,ISO 9653:1991,Adhesives — Test method for shear impact strength of adhesive bonds,Adhésifs — Essai de tenue au choc par cisaillement du joint adhésif,1991-12-12,1,['83.180'],ISO/TC 61/SC 11,9599,,[28297],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9654:1989 - **Identifier:** ISO 9654:1989 _(verified: appears in the quote below)_ - **Item title:** Pliers and nippers for electronics — Single-purpose nippers — Cutting nippers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9654:2004 - **Withdrawn / published date:** 1989-12-07 _(verified: appears in the quote below)_ > 17499,IS,,ISO 9654:1989,Pliers and nippers for electronics — Single-purpose nippers — Cutting nippers,Pinces pour l'électronique — Pinces unifonction — Pinces coupantes,1989-12-07,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[33648],"['en','fr']",4,Specifies the principal dimensions of single-purpose cutting nippers for electronics and the range of diameters of test wires to be used to verify the functional performance of htese nippers in accordance with ISO 9656. The general technical requirements are given in ISO 9657. The cutting nippers illustrated in ISO 9654 are only examples and are not intended to affect the manufacturers' design.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9655:1989 - **Identifier:** ISO 9655:1989 _(verified: appears in the quote below)_ - **Item title:** Pliers and nippers for electronics — Single-purpose pliers — Pliers for gripping and manipulating _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9655:2004 - **Withdrawn / published date:** 1989-12-14 _(verified: appears in the quote below)_ > 17500,IS,,ISO 9655:1989,Pliers and nippers for electronics — Single-purpose pliers — Pliers for gripping and manipulating,Pinces pour l'électronique — Pinces unifonction — Pinces de serrage et de manipulation,1989-12-14,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[33649],"['en','fr']",4,Specifies the principal dimensions of single-purpose pliers for electronics for gripping and manipulating. The test method for checking their proper functioning are given in ISO 9656. The general technical requirements are given in ISO 9657. The pliers illustrated in ISO 9655 are only examples and are not intended to affect the manufacturers' design.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9656:1989 - **Identifier:** ISO 9656:1989 _(verified: appears in the quote below)_ - **Item title:** Pliers and nippers for electronics — Test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9656:2004 - **Withdrawn / published date:** 1989-11-16 _(verified: appears in the quote below)_ > 17501,IS,,ISO 9656:1989,Pliers and nippers for electronics — Test methods,Pinces pour l'électronique — Méthodes d'essai,1989-11-16,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[33650],"['en','fr']",4,"Specifies the methods of test for checking the correct functioning of pliers and nippers for electronics. The test parameters have been specified on the basis of the functional uses of the tools. Gives wire cutting test, torsion test for round nose plierd, load test for flat nose and snipe nose pliers and hardness test of jaws.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9657:1989 - **Identifier:** ISO 9657:1989 _(verified: appears in the quote below)_ - **Item title:** Pliers and nippers for electronics — General technical requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9657:2004 - **Withdrawn / published date:** 1989-12-14 _(verified: appears in the quote below)_ > 17502,IS,,ISO 9657:1989,Pliers and nippers for electronics — General technical requirements,Pinces pour l'électronique — Spécifications techniques générales,1989-12-14,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[33651],"['en','fr']",3,"Specifies the general technical requirements to be met by pliers and nippers for electronics. They are intended for use on electronic components, printed circuit boards, etc. Certain terms are defined in ISO 5742. ISO 9657 does not apply to tools intended for working on live electrical circuits and for antistatic applications.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9658:1990 - **Identifier:** ISO 9658:1990 _(verified: appears in the quote below)_ - **Item title:** Steel — Determination of aluminium content — Flame atomic absorption spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9658:2024 - **Withdrawn / published date:** 1990-02-22 _(verified: appears in the quote below)_ > 17503,IS,,ISO 9658:1990,Steel — Determination of aluminium content — Flame atomic absorption spectrometric method,Aciers — Dosage de l'aluminium — Méthode par spectrométrie d'absorption atomique dans la flamme,1990-02-22,1,['77.080.20'],ISO/TC 17/SC 1,9599,,[86371],"['en','fr']",11,"The method is applicable to the determination of acid-soluble and/or total aluminium content between 0,005 % (m/m) and 0,20 % (m/m). Specifies definition, principle, reagents, apparatus, sampling, procedure, expression of results and test report. The annexes give additional information on the international co-operative tests, a graphical representation of precision data and procedures for the determination of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9660:1988 - **Identifier:** ISO 9660:1988 _(verified: appears in the quote below)_ - **Item title:** Information processing — Volume and file structure of CD-ROM for information interchange _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC DIS 9660 | ISO/IEC 9660:2023 - **Withdrawn / published date:** 1988-04-14 _(verified: appears in the quote below)_ > 17505,IS,,ISO 9660:1988,Information processing — Volume and file structure of CD-ROM for information interchange,Traitement de l'information — Structure de volume et de fichier des disques optiques compacts à mémoire fixe (CD-ROM) destinés à l'échange d'information,1988-04-14,1,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,,"[26736,81979]","['en','fr']",31,
Specifies the volume and file structure of compact read-only optical disks (CD-ROM) for the information interchange between information processing systems. Defines: the attributes of the volume and the descriptors recorded on it; the relationship among volumes of a volume set; the placement of files; the attributes of the files; recorded struc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9660:1988/Amd 1:2013 - **Identifier:** ISO 9660:1988/Amd 1:2013 _(verified: appears in the quote below)_ - **Item title:** Information processing — Volume and file structure of CD-ROM for information interchange — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 9660:2023 - **Withdrawn / published date:** 2013-04-11 _(verified: appears in the quote below)_ > 61625,IS,Amd,ISO 9660:1988/Amd 1:2013,Information processing — Volume and file structure of CD-ROM for information interchange — Amendment 1,Traitement de l'information — Structure de volume et de fichier des disques optiques compacts à mémoire fixe (CD-ROM) destinés à l'échange d'information — Amendement 1,2013-04-11,1,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,,[81979],['en'],12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9660:1988/Amd 2:2020 - **Identifier:** ISO 9660:1988/Amd 2:2020 _(verified: appears in the quote below)_ - **Item title:** Information processing — Volume and file structure of CD-ROM for information interchange — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 9660:2023 - **Withdrawn / published date:** 2020-04-09 _(verified: appears in the quote below)_ > 78259,IS,Amd,ISO 9660:1988/Amd 2:2020,Information processing — Volume and file structure of CD-ROM for information interchange — Amendment 2,Traitement de l'information — Structure de volume et de fichier des disques optiques compacts à mémoire fixe (CD-ROM) destinés à l'échange d'information — Amendement 2,2020-04-09,1,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,,[81979],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9661:1988 - **Identifier:** ISO 9661:1988 _(verified: appears in the quote below)_ - **Item title:** Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 data bytes per inch) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 9661:1994 - **Withdrawn / published date:** 1988-03-31 _(verified: appears in the quote below)_ > 17506,IS,,ISO 9661:1988,"Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 data bytes per inch)","Traitement de l'information — Échange d'information sur cartouche de bande magnétique de 12,7 mm de large (0,5 in) — 18 pistes, 1 491 caractères par millimètre (37 871 caractères par inch)",1988-03-31,1,['35.220.20'],ISO/IEC JTC 1,9599,,[24918],"['en','fr']",42, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9661:1988/Cor 1:1990 - **Identifier:** ISO 9661:1988/Cor 1:1990 _(verified: appears in the quote below)_ - **Item title:** Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 data bytes per inch) — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 9661:1994 - **Withdrawn / published date:** 1990-11-15 _(verified: appears in the quote below)_ > 17507,IS,Cor,ISO 9661:1988/Cor 1:1990,"Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 data bytes per inch) — Technical Corrigendum 1","Traitement de l'information — Échange d'information sur cartouche de bande magnétique de 12,7 mm de large (0,5 in) — 18 pistes, 1 491 caractères par millimètre (37 871 caractères par inch) — Rectificatif technique 1",1990-11-15,1,['35.220.20'],ISO/IEC JTC 1,9599,,[24918],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9661:1988/Cor 2:1992 - **Identifier:** ISO 9661:1988/Cor 2:1992 _(verified: appears in the quote below)_ - **Item title:** Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 data bytes per inch) — Technical Corrigendum 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 9661:1994 - **Withdrawn / published date:** 1992-02-27 _(verified: appears in the quote below)_ > 20547,IS,Cor,ISO 9661:1988/Cor 2:1992,"Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 data bytes per inch) — Technical Corrigendum 2","Traitement de l'information — Échange d'information sur cartouche de bande magnétique de 12,7 mm de large (0,5 in) — 18 pistes, 1 491 caractères par millimètre (37 871 caractères par inch) — Rectificatif technique 2",1992-02-27,1,['35.220.20'],ISO/IEC JTC 1,9599,,[24918],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9665:1993 - **Identifier:** ISO 9665:1993 _(verified: appears in the quote below)_ - **Item title:** Adhesives — Animal glues — Methods for sampling and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9665:1998 - **Withdrawn / published date:** 1993-03-04 _(verified: appears in the quote below)_ > 17511,IS,,ISO 9665:1993,Adhesives — Animal glues — Methods for sampling and testing,Adhésifs — Colles d'origine animale — Méthodes d'échantillonnage et d'essai,1993-03-04,1,['83.180'],ISO/TC 61/SC 11,9599,,[26847],"['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9667:1998 - **Identifier:** ISO 9667:1998 _(verified: appears in the quote below)_ - **Item title:** Aircraft ground support equipment — Tow bars _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9667:2016 - **Withdrawn / published date:** 1998-12-17 _(verified: appears in the quote below)_ > 17514,IS,,ISO 9667:1998,Aircraft ground support equipment — Tow bars,Équipement au sol pour aéronefs — Barres de tractage,1998-12-17,1,['49.100'],ISO/TC 20/SC 9,9599,,[66248],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9667:2016 - **Identifier:** ISO 9667:2016 _(verified: appears in the quote below)_ - **Item title:** Aircraft ground support equipment — Tow bars _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9667:2017 - **Withdrawn / published date:** 2016-01-07 _(verified: appears in the quote below)_ > 66248,IS,,ISO 9667:2016,Aircraft ground support equipment — Tow bars,Équipement au sol pour aéronefs — Barres de tractage,2016-01-07,2,['49.100'],ISO/TC 20/SC 9,9599,[17514],[71493],['en'],5,
ISO 9667:2016 specifies dimensional and physical requirements of tow bar connections to tractor and aircraft (see Figure 1). It is applicable to any new type of commercial-transport-category aircraft tow bar designed or built after publication of this International Standard.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9668:1990 - **Identifier:** ISO 9668:1990 _(verified: appears in the quote below)_ - **Item title:** Pulps — Determination of magnesium content — Flame atomic absorption spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12830:2011 - **Withdrawn / published date:** 1990-02-01 _(verified: appears in the quote below)_ > 17515,IS,,ISO 9668:1990,Pulps — Determination of magnesium content — Flame atomic absorption spectrometric method,Pâtes — Détermination de la teneur en magnésium — Méthode par spectrométrie d'absorption atomique dans une flamme,1990-02-01,1,['85.040'],ISO/TC 6,9599,,[51848],"['en','fr']",3,"Is applicable to all kinds of pulp, except pulps containing talc. The method specified involves the use of some hazardous chemicals and of gases that can form explosive mixtures with air.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9680:1993 - **Identifier:** ISO 9680:1993 _(verified: appears in the quote below)_ - **Item title:** Dental operating light _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 9680 | ISO 9680:2007 - **Withdrawn / published date:** 1993-10-07 _(verified: appears in the quote below)_ > 17535,IS,,ISO 9680:1993,Dental operating light,Appareil d'éclairage opératoire dentaire,1993-10-07,1,['11.060.20'],ISO/TC 106/SC 6,9599,,"[23004,39276]","['en','fr']",11,The preferred voltages are: 12; 24; 36; 48; 72; 80; 96; 120; 144; 160; 192; 240.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9680:1993/Cor 1:1995 - **Identifier:** ISO 9680:1993/Cor 1:1995 _(verified: appears in the quote below)_ - **Item title:** Dental operating light — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9680:2007 - **Withdrawn / published date:** 1995-03-02 _(verified: appears in the quote below)_ > 25195,IS,Cor,ISO 9680:1993/Cor 1:1995,Dental operating light — Technical Corrigendum 1,Appareil d'éclairage opératoire dentaire — Rectificatif technique 1,1995-03-02,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[39276],['en'],1,"Deletes, inserts and changes text on pages 1, 2, 5 and 10.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9680:2007 - **Identifier:** ISO 9680:2007 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Operating lights _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9680:2014 - **Withdrawn / published date:** 2007-06-14 _(verified: appears in the quote below)_ > 39276,IS,,ISO 9680:2007,Dentistry — Operating lights,Art dentaire — Appareils d'éclairage,2007-06-14,2,['11.060.20'],ISO/TC 106/SC 6,9599,"[25195,17535]",[57944],"['en','fr']",18,"ISO 9680:2007 specifies requirements and test methods for operating lights used in the dental office and intended for illuminating the oral cavity of patients. It also contains specifications on manufacturers' instructions, marking and packaging.
ISO 9680:2007 applies to operating lights that are intended to be permanently fixed to the ceiling, or to the wall or to the floor.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9680:2014 - **Identifier:** ISO 9680:2014 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Operating lights _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9680:2021 - **Withdrawn / published date:** 2014-10-15 _(verified: appears in the quote below)_ > 57944,IS,,ISO 9680:2014,Dentistry — Operating lights,Médecine bucco-dentaire — Appareils d'éclairage,2014-10-15,3,['11.060.20'],ISO/TC 106/SC 6,9599,[39276],[74496],"['en','fr']",17,"ISO 9680:2014 specifies requirements and test methods for operating lights used in the dental office and intended for illuminating the oral cavity of patients. It also contains specifications on manufacturers' instructions for use, marking and packaging.
ISO 9680:2014 applies to operating lights, irrespective of the technology of the light source.
ISO 9680:2014 excludes auxiliary light sources, e.g. from dental handpieces and dental headlamps and also operating lights which are specifically design Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9680:2021 - **Identifier:** ISO 9680:2021 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Operating lights _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9680:2026 - **Withdrawn / published date:** 2021-11-12 _(verified: appears in the quote below)_ > 74496,IS,,ISO 9680:2021,Dentistry — Operating lights,Médecine bucco-dentaire — Luminaires opératoires,2021-11-12,4,['11.060.20'],ISO/TC 106/SC 6,9599,[57944],[85762],"['en','fr']",21,"
This document specifies requirements and test methods for operating lights used in the dental office and intended for illuminating the oral cavity of patients. It also contains specifications on the instructions for use, marking and packaging.
This document applies to operating lights, irrespective of the technology of the light source.
This document excludes auxiliary light sources, for example, from dental handpieces and dental headlamps and also operating lights which are specifically designed Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9682-1:1991 - **Identifier:** ISO 9682-1:1991 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of manganese content — Part 1: Flame atomic absorption spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9682-1:2009 - **Withdrawn / published date:** 1991-11-28 _(verified: appears in the quote below)_ > 17537,IS,,ISO 9682-1:1991,Iron ores — Determination of manganese content — Part 1: Flame atomic absorption spectrometric method,Minerais de fer — Dosage du manganèse — Partie 1: Méthode par spectrométrie d'absorption atomique dans la flamme,1991-11-28,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[45794],"['en','fr']",11,"
The specified method applies to manganese contents between 0,01 % (m/m) and 3 % (m/m) in natural iron ores, iron ore concentrates and agglomerates, including sinter products. Annex A forms an integral part of this standard. Annexes B and C are for information only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9683:1991 - **Identifier:** ISO 9683:1991 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of vanadium content — BPHA spectrophotometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9683-1:2006 - **Withdrawn / published date:** 1991-11-21 _(verified: appears in the quote below)_ > 17538,IS,,ISO 9683:1991,Iron ores — Determination of vanadium content — BPHA spectrophotometric method,Minerais de fer — Dosage du vanadium — Méthode spectrophotométrique à la BPHA,1991-11-21,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[43945],"['en','fr']",9,"The specified method applies to vanadium contents between 0,005 % (m/m) and 0,5 % (m/m) in natural iron ores, iron ore concentrates and agglomerates, including sinter products. Annex A is for information only. Annexes B and C are an integral part of this standard.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9684:1991 - **Identifier:** ISO 9684:1991 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of vanadium content — Flame atomic absorption spectrometric methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9683-2:2009 - **Withdrawn / published date:** 1991-10-17 _(verified: appears in the quote below)_ > 17539,IS,,ISO 9684:1991,Iron ores — Determination of vanadium content — Flame atomic absorption spectrometric methods,Minerais de fer — Détermination du vanadium — Méthodes par spectrométrie d'absorption atomique dans la flamme,1991-10-17,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[45322],"['en','fr']",11,"Specifies two methods: method 1 is applicable to vanadium contents between 0,005 % and 0,05 %, and method 2 to vanadium contents between 0,05 % and 0,5 %. Annex A forms an integral part of this standard. Annexes B and C are for information only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9686:1992 - **Identifier:** ISO 9686:1992 _(verified: appears in the quote below)_ - **Item title:** Direct reduced iron — Determination of carbon and/or sulfur content — High frequency combustion method with infrared measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9686:2006 - **Withdrawn / published date:** 1992-12-03 _(verified: appears in the quote below)_ > 17541,IS,,ISO 9686:1992,Direct reduced iron — Determination of carbon and/or sulfur content — High frequency combustion method with infrared measurement,Minerais de fer préréduits — Dosage du carbone et/ou du soufre — Méthode par combustion haute fréquence et mesurage par infrarouge,1992-12-03,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[39728],"['en','fr']",12,"The method is based on combustion of the test portion in a refractory crucible in a flow of oxygen in the presence of an accelerator, conversion of the carbon present into carbon dioxide and the sulfur present into sulfur dioxide, and measurement of each gas by infrared absorption. Applies to carbon contents between 0,05 % and 2,5 % and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9686:2006 - **Identifier:** ISO 9686:2006 _(verified: appears in the quote below)_ - **Item title:** Direct reduced iron — Determination of carbon and/or sulfur — High-frequency combustion method with infrared measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 9686:2017 - **Withdrawn / published date:** 2006-04-27 _(verified: appears in the quote below)_ > 39728,IS,,ISO 9686:2006,Direct reduced iron — Determination of carbon and/or sulfur — High-frequency combustion method with infrared measurement,Minerais de fer préréduits — Dosage du carbone et/ou du soufre — Méthode par combustion haute fréquence et mesurage par infrarouge,2006-04-27,2,['73.060.10'],ISO/TC 102/SC 2,9599,[17541],[71896],['en'],14,"
ISO 9686:2006 specifies a method for the determination of the mass fraction of carbon and/or sulfur in direct reduced iron by infrared measurement after high-frequency combustion.
This method is applicable to mass fractions of carbon between 0,05 % and 2,5 %, and/or mass fractions of sulfur between 0,001 % and 0,05 % in direct reduced iro Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9687:1993 - **Identifier:** ISO 9687:1993 _(verified: appears in the quote below)_ - **Item title:** Dental equipment — Graphical symbols _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9687:2015 - **Withdrawn / published date:** 1993-02-04 _(verified: appears in the quote below)_ > 17542,IS,,ISO 9687:1993,Dental equipment — Graphical symbols,Matériel dentaire — Symboles graphiques,1993-02-04,1,"['01.080.20','11.060.20']",ISO/TC 106/SC 6,9599,,[59876],"['en','fr']",20,"
The 153 symbols specified are to be used on the appropriate piece of equipment and in documents pertaining to dental equipment pieces, e.g. in instructions for use. The symbols are selected specifically for all kinds of dental equipment. The majority of them are taken from the relevant IEC and ISO International Standards.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9689:1990 - **Identifier:** ISO 9689:1990 _(verified: appears in the quote below)_ - **Item title:** Raw optical glass — Resistance to attack by aqueous alkaline phosphate-containing detergent solutions at 50 degrees C — Testing and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9689:2025 - **Withdrawn / published date:** 1990-11-22 _(verified: appears in the quote below)_ > 17544,IS,,ISO 9689:1990,Raw optical glass — Resistance to attack by aqueous alkaline phosphate-containing detergent solutions at 50 degrees C — Testing and classification,Verre d'optique brut — Résistance à l'attaque par des solutions aqueuses de détergent contenant du phosphate alcalin à 50 degrés C — Essai et classification,1990-11-22,1,['81.040.10'],ISO/TC 172/SC 3,9599,,[83729],"['en','fr']",8,Specifies a method for testing the resistance of raw optical glasses and a classification of optical glasses according to the aqueous alkaline phosphate-containing detergent resistance (phosphate resistance) determined by this method.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9692-1:2003 - **Identifier:** ISO 9692-1:2003 _(verified: appears in the quote below)_ - **Item title:** Welding and allied processes — Recommendations for joint preparation — Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9692-1:2013 - **Withdrawn / published date:** 2003-12-10 _(verified: appears in the quote below)_ > 33254,IS,,ISO 9692-1:2003,"Welding and allied processes — Recommendations for joint preparation — Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels","Soudage et techniques connexes — Recommandations pour la préparation de joints — Partie 1: Soudage manuel à l'arc avec électrode enrobée, soudage à l'arc avec électrode fusible sous protection gazeuse, soudage aux gaz, soudage TIG et soudage par faisceau des aciers",2003-12-10,1,['25.160.40'],ISO/TC 44/SC 7,9599,[17547],[62520],"['en','fr']",15,"ISO 9692-1:2004 specifies types of joint preparation for metal-arc welding with covered electrode, gas-shielded metal-arc welding, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9692:1992 - **Identifier:** ISO 9692:1992 _(verified: appears in the quote below)_ - **Item title:** Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding — Joint preparations for steel _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9692-1:2003 - **Withdrawn / published date:** 1992-10-21 _(verified: appears in the quote below)_ > 17547,IS,,ISO 9692:1992,"Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding — Joint preparations for steel","Soudage à l'arc avec électrode enrobée, soudage à l'arc sous protection gazeuse et soudage aux gaz — Préparations de joint sur acier",1992-10-21,1,['25.160.40'],ISO/TC 44/SC 7,9599,,[33254],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9692-2:1998 - **Identifier:** ISO 9692-2:1998 _(verified: appears in the quote below)_ - **Item title:** Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 9692-2 | ISO 9692-2:2024 - **Withdrawn / published date:** 1998-03-19 _(verified: appears in the quote below)_ > 21036,IS,,ISO 9692-2:1998,Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels,Soudage et techniques connexes — Préparation de joints — Partie 2: Soudage à l'arc sous flux en poudre des aciers,1998-03-19,1,['25.160.10'],ISO/TC 44/SC 7,9599,,"[69596,86144]","['en','fr']",9,"
This part of IS0 9692 applies to types of joint preparation for submerged arc welding with one wire electrode (process 121 according to IS0 4063) on steel.
This part of IS0 9692 covers only the welding positions PA and PB according to IS0 6947. In case PC is used, special preparation will be necessary.
It applies to fully penetrated welds. For partly penetrated welds, t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9692-3:2000 - **Identifier:** ISO 9692-3:2000 _(verified: appears in the quote below)_ - **Item title:** Welding and allied processes — Recommendations for joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9692-3:2016 - **Withdrawn / published date:** 2000-12-21 _(verified: appears in the quote below)_ > 27208,IS,,ISO 9692-3:2000,Welding and allied processes — Recommendations for joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys,Soudage et techniques connexes — Recommandations pour la préparation de joints — Partie 3: Soudage MIG et TIG de l'aluminium et de ses alliages,2000-12-21,1,['25.160.10'],ISO/TC 44/SC 7,9599,,[62519],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9693-1:2012 - **Identifier:** ISO 9693-1:2012 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Compatibility testing — Part 1: Metal-ceramic systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9693:2019 - **Withdrawn / published date:** 2012-02-22 _(verified: appears in the quote below)_ > 54946,IS,,ISO 9693-1:2012,Dentistry — Compatibility testing — Part 1: Metal-ceramic systems,Médecine bucco-dentaire — Essais de compatibilité — Partie 1: Systèmes métallo-céramiques,2012-02-22,1,['11.060.10'],ISO/TC 106/SC 2,9599,"[40888,23716]",[75855],"['en','fr']",6,"
ISO 9693-1:2012 specifies test methods for determining the compatibility of metallic and ceramic materials used for dental restorations by testing the composite structure.
The requirements given in ISO 9693-1:2012 are applicable to metallic materials and ceramics when used in combination, and are not applicable to either metallic materials or ceramics when used alone.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9693:1991 - **Identifier:** ISO 9693:1991 _(verified: appears in the quote below)_ - **Item title:** Dental ceramic fused to metal restorative materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9693:1999 - **Withdrawn / published date:** 1991-06-06 _(verified: appears in the quote below)_ > 17548,IS,,ISO 9693:1991,Dental ceramic fused to metal restorative materials,Produits pour restaurations dentaires métallo-céramiques,1991-06-06,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[23716],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9693:1999 - **Identifier:** ISO 9693:1999 _(verified: appears in the quote below)_ - **Item title:** Metal-ceramic dental restorative systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9693-2:2016 | ISO 9693-1:2012 - **Withdrawn / published date:** 1999-12-16 _(verified: appears in the quote below)_ > 23716,IS,,ISO 9693:1999,Metal-ceramic dental restorative systems,Systèmes pour restaurations dentaires métallo-céramiques,1999-12-16,2,['11.060.10'],ISO/TC 106/SC 2,9599,[17548],"[56750,54946]","['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9693:1999/Amd 1:2005 - **Identifier:** ISO 9693:1999/Amd 1:2005 _(verified: appears in the quote below)_ - **Item title:** Metal-ceramic dental restorative systems — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9693-2:2016 | ISO 9693-1:2012 - **Withdrawn / published date:** 2005-10-07 _(verified: appears in the quote below)_ > 40888,IS,Amd,ISO 9693:1999/Amd 1:2005,Metal-ceramic dental restorative systems — Amendment 1,Systèmes pour restaurations dentaires métallo-céramiques — Amendement 1,2005-10-07,2,['11.060.10'],ISO/TC 106/SC 2,9599,,"[56750,54946]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9693-2:2016 - **Identifier:** ISO 9693-2:2016 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Compatibility testing — Part 2: Ceramic-ceramic systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9693:2019 - **Withdrawn / published date:** 2016-02-12 _(verified: appears in the quote below)_ > 56750,IS,,ISO 9693-2:2016,Dentistry — Compatibility testing — Part 2: Ceramic-ceramic systems,Médecine bucco-dentaire — Essais de compatibilité — Partie 2: Systèmes céramo-céramiques,2016-02-12,1,['11.060.10'],ISO/TC 106/SC 2,9599,"[40888,23716]",[75855],"['en','fr']",9,"ISO 9693-2:2016 specifies requirements and test methods to assess the compatibility of ceramic-ceramic materials used for dental restorations by testing composite structures.
The requirements of this part of ISO 9693 apply when different ceramic components are used in combination. Compliance cannot be claimed for either ceramic alone.
For requirements of ceramic materials, see ISO 6872.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9693:2019 - **Identifier:** ISO 9693:2019 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Compatibility testing for metal-ceramic and ceramic-ceramic systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9693:2026 - **Withdrawn / published date:** 2019-10-25 _(verified: appears in the quote below)_ > 75855,IS,,ISO 9693:2019,Dentistry — Compatibility testing for metal-ceramic and ceramic-ceramic systems,Médecine bucco-dentaire — Essais de compatibilité pour systèmes métallo-céramiques et céramo-céramiques,2019-10-25,3,['11.060.10'],ISO/TC 106/SC 2,9599,"[56750,54946]",[93013],"['en','fr']",10,"This document specifies requirements and test methods to assess the thermomechanical compatibility between a veneering ceramic and a metallic or ceramic substructure material used for dental restorations.
This document applies only to the materials used in combination. Conformity cannot be claimed for a single material.
For requirements for ceramic materials, see ISO 6872. For require Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9694:1996 - **Identifier:** ISO 9694:1996 _(verified: appears in the quote below)_ - **Item title:** Dental phosphate-bonded casting investments _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 15912:2006 - **Withdrawn / published date:** 1996-12-19 _(verified: appears in the quote below)_ > 17549,IS,,ISO 9694:1996,Dental phosphate-bonded casting investments,Revêtements pour coulées dentaires à liant-phosphate,1996-12-19,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[37646],"['en','fr']",8,
Classifies dental phosphate-bonded casting investments in two types. Specifies requirements for the essential physical properties of the casting investment and the test methods to be used to determine these properties.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9696:1992 - **Identifier:** ISO 9696:1992 _(verified: appears in the quote below)_ - **Item title:** Water quality — Measurement of gross alpha activity in non-saline water — Thick source method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9696:2007 - **Withdrawn / published date:** 1992-11-25 _(verified: appears in the quote below)_ > 17552,IS,,ISO 9696:1992,Water quality — Measurement of gross alpha activity in non-saline water — Thick source method,Qualité de l'eau — Mesurage de l'activité alpha globale dans l'eau non saline — Méthode par source concentrée,1992-11-25,1,"['13.060.60','13.280']",ISO/TC 147,9599,,[42755],"['en','fr']",11,"The method is based on acidifying the sample to stabilize it, evaporation almost to dryness, conversion to the sulfate form and ignition at 350 °C, transfer of a portion of the residue to a planchette and counting alpha-activity in a alpha-particle detector. Covers non-volatile (at 350 °C) alpha-active radionuclides and can be extended to saline or mineralized waters, but with a reduce Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9696:2007 - **Identifier:** ISO 9696:2007 _(verified: appears in the quote below)_ - **Item title:** Water quality — Measurement of gross alpha activity in non-saline water — Thick source method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9696:2017 | ISO/DIS 9696 - **Withdrawn / published date:** 2007-11-15 _(verified: appears in the quote below)_ > 42755,IS,,ISO 9696:2007,Water quality — Measurement of gross alpha activity in non-saline water — Thick source method,Qualité de l'eau — Mesurage de l'activité alpha globale des eaux non salines — Méthode par source concentrée,2007-11-15,2,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,[17552],"[66766,62397]","['en','fr','ru']",11,"
ISO 9696:2007 specifies a method for the determination of gross alpha activity in non-saline waters for alpha‑emitting radionuclides which are not volatile at 350 °C. It is possible to determine supported volatile radionuclides measured to an extent determined by half-life, matrix retention (of the volatile species) and the duration of measurement (counting time Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9697:1992 - **Identifier:** ISO 9697:1992 _(verified: appears in the quote below)_ - **Item title:** Water quality — Measurement of gross beta activity in non-saline water _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9697:2008 - **Withdrawn / published date:** 1992-11-24 _(verified: appears in the quote below)_ > 17553,IS,,ISO 9697:1992,Water quality — Measurement of gross beta activity in non-saline water,Qualité de l'eau — Mesurage de l'activité bêta globale dans l'eau non saline,1992-11-24,1,"['13.060.60','13.280']",ISO/TC 147,9599,,[45347],"['en','fr']",10,"
The method is based on acidifying the sample to stabilize it, evaporation almost to dryness, conversion to the sulfate form and ignition at 350 °C, transfer of a portion of the residue to a planchette and counting beta-activity in a Geiger counting assembly. Covers non-volatile beta-active radionuclides with maximum beta energies higher than 0,3 MeV. Applies to the analysis of raw and potable waters.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9697:2008 - **Identifier:** ISO 9697:2008 _(verified: appears in the quote below)_ - **Item title:** Water quality — Measurement of gross beta activity in non-saline water — Thick source method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9697:2015 - **Withdrawn / published date:** 2008-10-30 _(verified: appears in the quote below)_ > 45347,IS,,ISO 9697:2008,Water quality — Measurement of gross beta activity in non-saline water — Thick source method,Qualité de l'eau — Mesurage de l'activité bêta globale des eaux non salines — Méthode par source concentrée,2008-10-30,2,"['13.060.60','13.280']",ISO/TC 147/SC 3,9599,[17553],[63382],"['en','fr']",11,"ISO 9697:2008 specifies a method for the determination of gross beta activity in non-saline waters. The method covers non-volatile radionuclides with maximum beta energies > 0,3 MeV. Measurement of very low energy beta emitters, such as 3H; 14C, 35S and 241Pu, is not included in ISO 9697:2008.
The method is applicable Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9697:2015 - **Identifier:** ISO 9697:2015 _(verified: appears in the quote below)_ - **Item title:** Water quality — Gross beta activity in non-saline water — Test method using thick source _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9697:2018 - **Withdrawn / published date:** 2015-04-02 _(verified: appears in the quote below)_ > 63382,IS,,ISO 9697:2015,Water quality — Gross beta activity in non-saline water — Test method using thick source,Qualité de l'eau — Activité bêta globale des eaux non salines — Méthode d'essai par source concentrée,2015-04-02,3,"['13.060.60','13.280']",ISO/TC 147/SC 3,9599,[45347],[72374],"['en','fr']",12,"
ISO 9697:2015 specifies a test method for the determination of gross beta activity concentration in non-saline waters. The method covers non-volatile radionuclides with maximum beta energies of approximately 0,3 MeV or higher. Measurement of low energy beta emitters (e.g. 3H, 228Ra, 210Pb, 14C, 35S, and 241Pu) and some ga Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9698:1989 - **Identifier:** ISO 9698:1989 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of tritium activity concentration — Liquid scintillation counting method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9698:2010 - **Withdrawn / published date:** 1989-12-07 _(verified: appears in the quote below)_ > 17554,IS,,ISO 9698:1989,Water quality — Determination of tritium activity concentration — Liquid scintillation counting method,Qualité de l'eau — Détermination de l'activité volumique du tritium — Méthode par comptage des scintillations en milieu liquide,1989-12-07,1,"['13.060.60','13.280']",ISO/TC 147,9599,,[51944],"['en','fr']",7,
The method specified is applicable to all types of water including seawater with concentrations of up to 10 ^ 6 Bq/m ^ 3 when using 20 ml counting vials. The method is not applicable to the analysis of organically bound tritium; its determination requires an oxidative digestion.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9698:2010 - **Identifier:** ISO 9698:2010 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of tritium activity concentration — Liquid scintillation counting method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9698:2019 - **Withdrawn / published date:** 2010-12-10 _(verified: appears in the quote below)_ > 51944,IS,,ISO 9698:2010,Water quality — Determination of tritium activity concentration — Liquid scintillation counting method,Qualité de l'eau — Détermination de l'activité volumique du tritium — Méthode par comptage des scintillations en milieu liquide,2010-12-10,2,"['13.060.60','13.280']",ISO/TC 147/SC 3,9599,[17554],[69649],"['en','fr']",24,"ISO 9698:2010 specifies the conditions for the determination of tritium activity concentration in samples of environmental water or of tritiated water using liquid scintillation counting.
The choice of the analytical procedure, either with or without distillation of the water sample prior to determination, depends on the aim of the measureme Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9699:1994 - **Identifier:** ISO 9699:1994 _(verified: appears in the quote below)_ - **Item title:** Performance standards in building — Checklist for briefing — Contents of brief for building design _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19208:2016 - **Withdrawn / published date:** 1994-12-22 _(verified: appears in the quote below)_ > 17555,IS,,ISO 9699:1994,Performance standards in building — Checklist for briefing — Contents of brief for building design,Normes de performance dans le bâtiment — Liste de contrôle consultative — Contenu d'un programme de conception dans l'industrie du bâtiment,1994-12-22,1,['91.040.01'],ISO/TC 59,9599,,[63999],"['en','fr']",15,"
Describes the content of a brief for building design. Can be used from the time when the client first considers the possible need for a building project. Applies to all kinds and sizes of design project. Can also apply whatever the chosen function or purpose of the brief, for example instructing, promoting discussion, recording, as a basis for evaluation or in a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 97:1975 - **Identifier:** ISO 97:1975 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 96-2:1992 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 3764,IS,,ISO 97:1975,"Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers",Matériel pour l'industrie textile — Anneaux à filer et à retordre pour curseurs oreille,1975-11-01,1,['59.120.10'],ISO/TC 72/SC 1,9599,,[3763],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9705:1993 - **Identifier:** ISO 9705:1993 _(verified: appears in the quote below)_ - **Item title:** Fire tests — Full-scale room test for surface products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9705-1:2016 - **Withdrawn / published date:** 1993-06-17 _(verified: appears in the quote below)_ > 17561,IS,,ISO 9705:1993,Fire tests — Full-scale room test for surface products,Essais au feu — Essai dans une pièce en vraie grandeur pour les produits de surface,1993-06-17,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[59895],"['en','fr']",31,"
Specifies a test method that simulates a fire that under well ventilated conditions starts in a corner of a small room with a single open doorway. The method is intended to evaluate the contribution to fire growth provided by a surface product using a specified ignition source. It is especially suitable for products that for some reason cannot be tested in a small laboratory scale, e.g. thermoplastic materials, the effect of an insulating substrate, joints Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9705:1993/Cor 1:1993 - **Identifier:** ISO 9705:1993/Cor 1:1993 _(verified: appears in the quote below)_ - **Item title:** Fire tests — Full-scale room test for surface products — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9705-1:2016 - **Withdrawn / published date:** 1993-09-16 _(verified: appears in the quote below)_ > 22705,IS,Cor,ISO 9705:1993/Cor 1:1993,Fire tests — Full-scale room test for surface products — Technical Corrigendum 1,Essais au feu — Essai dans une pièce en vraie grandeur pour les produits de surface — Rectificatif technique 1,1993-09-16,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[59895],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9706:1994 - **Identifier:** ISO 9706:1994 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Paper for documents — Requirements for permanence _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9706:2025 | ISO/DIS 9706 - **Withdrawn / published date:** 1994-02-10 _(verified: appears in the quote below)_ > 17562,IS,,ISO 9706:1994,Information and documentation — Paper for documents — Requirements for permanence,Information et documentation — Papier pour documents — Prescriptions pour la permanence,1994-02-10,1,"['85.060','01.140.40']",ISO/TC 46/SC 10,9599,,"[88908,87844]","['en','fr']",6,"
Specifies the requirements for permanent paper intended for documents given in terms of minimum strength measured by a tear test, minimum content of substance (such as calcium carbonate) that neutralize acid action measured by the alkali reserve, maximum content of easily oxidized material measured by the kappa number, maximum and minimum pH values of a cold water extract of the paper. Is applicable to unpr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9707:1991 - **Identifier:** ISO 9707:1991 _(verified: appears in the quote below)_ - **Item title:** Information and documentation — Statistics on the production and distribution of books, newspapers, periodicals and electronic publications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9707:2008 - **Withdrawn / published date:** 1991-08-29 _(verified: appears in the quote below)_ > 17564,IS,,ISO 9707:1991,"Information and documentation — Statistics on the production and distribution of books, newspapers, periodicals and electronic publications","Information et documentation — Statistiques relatives à la production et à la distribution de livres, de journaux, de périodiques et de publications électroniques",1991-08-29,1,['01.140.20'],ISO/TC 46/SC 8,9599,,[36314],"['en','fr']",13,
Does not apply to the following types of publications: publications issued for advertising purposes; publications considered to be of a transitory character; publications in which the text is not the most important part. Annex A is for information only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9709:2005 - **Identifier:** ISO 9709:2005 _(verified: appears in the quote below)_ - **Item title:** Structural timber — Visual strength grading — Basic principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9709:2018 - **Withdrawn / published date:** 2005-07-13 _(verified: appears in the quote below)_ > 31451,IS,,ISO 9709:2005,Structural timber — Visual strength grading — Basic principles,Bois de structure — Classement visuel selon la résistance — Principes de base,2005-07-13,1,['79.040'],ISO/TC 165,9599,,[69946],"['en','fr']",25,ISO 9709:2005 establishes the basic principles for rules and procedures governing the visual sorting of timber for use in structural applications.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9712:1992 - **Identifier:** ISO 9712:1992 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Qualification and certification of personnel _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9712:1999 - **Withdrawn / published date:** 1992-05-21 _(verified: appears in the quote below)_ > 17570,IS,,ISO 9712:1992,Non-destructive testing — Qualification and certification of personnel,Essais non destructifs — Qualification et certification du personnel,1992-05-21,1,"['03.100.30','19.100']",ISO/TC 135/SC 7,9599,,[23258],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 185](https://referencesource.org/iso-standard-supersessions/p/185/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 187](https://referencesource.org/iso-standard-supersessions/p/187/) Last verified: 2026-08-05. Review by: 2027-02-02.