Specifies a qualitative method for assessing the solubility in a selected solvent. The method applies to all fluxes of type 1, as defined in ISO 9454-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-13:1996 - **Identifier:** ISO 9455-13:1996 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 13: Determination of flux spattering _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 9455-13 | ISO 9455-13:2017 - **Withdrawn / published date:** 1996-12-05 _(verified: appears in the quote below)_ > 17180,IS,,ISO 9455-13:1996,Soft soldering fluxes — Test methods — Part 13: Determination of flux spattering,Flux de brasage tendre — Méthodes d'essai — Partie 13: Détermination des projections de flux,1996-12-05,1,['25.160.50'],ISO/TC 44/SC 12,9599,,"[66057,69291]","['en','fr']",3,"Describes a method for estimating the tendency of a flux to spatter in use. It is a qualitative (comparative) method and is only applicable to liquid fluxes, as defined in ISO 9454-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-14:1991 - **Identifier:** ISO 9455-14:1991 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 14: Assessment of tackiness of flux residues _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9455-14:2017 - **Withdrawn / published date:** 1991-12-12 _(verified: appears in the quote below)_ > 17181,IS,,ISO 9455-14:1991,Soft soldering fluxes — Test methods — Part 14: Assessment of tackiness of flux residues,Flux de brasage tendre — Méthodes d'essai — Partie 14: Détermination du pouvoir collant des résidus de flux,1991-12-12,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[69292],"['en','fr']",3,"Specifies a qualitative method applicable to all fluxes, solder pastes and flux cored solder wires. Describes the principle, the reagents and materials, the apparatus, the test pieces, the test procedure, the examination of the test piece, the expression of results, and the contents of the test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-15:1996 - **Identifier:** ISO 9455-15:1996 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 15: Copper corrosion test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 9455-15 | ISO 9455-15:2017 - **Withdrawn / published date:** 1996-10-17 _(verified: appears in the quote below)_ > 2394,IS,,ISO 9455-15:1996,Soft soldering fluxes — Test methods — Part 15: Copper corrosion test,Flux de brasage tendre — Méthodes d'essai — Partie 15: Essai de corrosion du cuivre,1996-10-17,1,['25.160.50'],ISO/TC 44/SC 12,9599,,"[66058,69293]","['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-16:1998 - **Identifier:** ISO 9455-16:1998 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 16: Flux efficacy tests, wetting balance method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9455-16:2013 - **Withdrawn / published date:** 1998-12-17 _(verified: appears in the quote below)_ > 17182,IS,,ISO 9455-16:1998,"Soft soldering fluxes — Test methods — Part 16: Flux efficacy tests, wetting balance method","Flux de brasage tendre — Méthodes d'essai — Partie 16: Essais d'efficacité des flux, méthode à la balance de mouillage",1998-12-17,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[54323],"['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-16:2013 - **Identifier:** ISO 9455-16:2013 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 16: Flux efficacy test, wetting balance method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9455-16:2019 - **Withdrawn / published date:** 2013-04-12 _(verified: appears in the quote below)_ > 54323,IS,,ISO 9455-16:2013,"Soft soldering fluxes — Test methods — Part 16: Flux efficacy test, wetting balance method","Flux de brasage tendre — Méthodes d'essai — Partie 16: Essai d'efficacité du flux, méthode à la balance de mouillage",2013-04-12,2,['25.160.50'],ISO/TC 44/SC 12,9599,[17182],[77198],"['en','fr']",18,"ISO 9455-16:2013 specifies a method for the assessment of the efficacy of a soft soldering flux, known as the wetting balance method. It gives a qualitative assessment of the comparative efficacy of two fluxes (for example, a standard and a test flux), based on their capacity to promote wetting of a metal surface by liquid solder. The method is applicable to all flux types Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-17:2002 - **Identifier:** ISO 9455-17:2002 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 9455-17 | ISO 9455-17:2024 - **Withdrawn / published date:** 2002-12-09 _(verified: appears in the quote below)_ > 32830,IS,,ISO 9455-17:2002,Soft soldering fluxes — Test methods — Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues,Flux de brasage tendre — Méthodes d'essai — Partie 17: Essai au peigne et essai de migration électrochimique de résistance d'isolement de surface des résidus de flux,2002-12-09,1,['25.160.50'],ISO/TC 44/SC 12,9599,,"[54324,84464]","['en','fr']",21,"
ISO 9455-17:2002 specifies a method of testing for deleterious effects that may arise from flux residues after soldering or tinning test coupons. The test is applicable to type 1 and type 2 fluxes in solid or liquid form, or in the form of flux-cored solder wire, solder preforms o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-3:1992 - **Identifier:** ISO 9455-3:1992 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 3: Determination of acid value, potentiometric and visual titration methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9455-3:2019 - **Withdrawn / published date:** 1992-05-14 _(verified: appears in the quote below)_ > 17170,IS,,ISO 9455-3:1992,"Soft soldering fluxes — Test methods — Part 3: Determination of acid value, potentiometric and visual titration methods",Flux de brasage tendre — Méthodes d'essai — Partie 3: Détermination de l'indice d'acide par des méthodes de titrage potentiométrique et visuel,1992-05-14,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[73174],"['en','fr']",4,"
Specifies the two methods for a flux of types 1 and 2 only, as defined in ISO 9454-1. Gives precision of the two methods as determined by interlaboratory tests.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-5:1992 - **Identifier:** ISO 9455-5:1992 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 5: Copper mirror test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9455-5:2014 - **Withdrawn / published date:** 1992-04-16 _(verified: appears in the quote below)_ > 17172,IS,,ISO 9455-5:1992,Soft soldering fluxes — Test methods — Part 5: Copper mirror test,Flux de brasage tendre — Méthodes d'essai — Partie 5: Essai au miroir de cuivre,1992-04-16,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[59300],"['en','fr']",3,Specifies a qualitative method for assessing the aggressiveness of a flux towards copper. The test is applicable to all fluxes of type 1 as defined in ISO 9454-1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-5:2014 - **Identifier:** ISO 9455-5:2014 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 5: Copper mirror test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9455-5:2020 - **Withdrawn / published date:** 2014-06-19 _(verified: appears in the quote below)_ > 59300,IS,,ISO 9455-5:2014,Soft soldering fluxes — Test methods — Part 5: Copper mirror test,Flux de brasage tendre — Méthodes d'essai — Partie 5: Essai au miroir de cuivre,2014-06-19,2,['25.160.50'],ISO/TC 44/SC 12,9599,[17172],[81064],"['en','fr']",3,ISO 9455-5:2014 specifies a qualitative method for assessing the aggressiveness of a flux towards copper. The test is applicable to all fluxes of type 1 as defined in ISO 9454‑1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-6:1995 - **Identifier:** ISO 9455-6:1995 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 6: Determination and detection of halide (excluding fluoride) content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9455-6:2022 - **Withdrawn / published date:** 1995-09-21 _(verified: appears in the quote below)_ > 17173,IS,,ISO 9455-6:1995,Soft soldering fluxes — Test methods — Part 6: Determination and detection of halide (excluding fluoride) content,Flux de brasage tendre — Méthodes d'essai — Partie 6: Dosage et détection des halogénures (à l'exception des fluorures),1995-09-21,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[84156],"['en','fr']",10,Describes three quantitative titration methods for the determination of halogenides (excluding fluoride) in soft soldering water-soluble fluxes.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9455-9:1993 - **Identifier:** ISO 9455-9:1993 _(verified: appears in the quote below)_ - **Item title:** Soft soldering fluxes — Test methods — Part 9: Determination of ammonia content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9455-9:2020 - **Withdrawn / published date:** 1993-04-15 _(verified: appears in the quote below)_ > 17176,IS,,ISO 9455-9:1993,Soft soldering fluxes — Test methods — Part 9: Determination of ammonia content,Flux de brasage tendre — Méthodes d'essai — Partie 9: Dosage de l'ammoniac,1993-04-15,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[81061],"['en','fr']",4,"The principle of the method specified is to distil a prepared flux solution with sodium hydroxide to expel the ammonia present in the flux, to pass the resulting distillate into a standard sulfuric acid solution, to titrate the excess acid with sodium hydroxide solution and to calculate the ammonia content of the flux. Applies to fluxes of class 3.1.1 only, as defined in ISO 9454-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9456:1991 - **Identifier:** ISO 9456:1991 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Ophthalmic optics — Marking of spectacle frames _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 12870:2004 - **Withdrawn / published date:** 1991-11-07 _(verified: appears in the quote below)_ > 17183,IS,,ISO 9456:1991,Optics and optical instruments — Ophthalmic optics — Marking of spectacle frames,Optique et instruments d'optique — Optique ophtalmique — Marquage des montures de lunettes,1991-11-07,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[29884],"['en','fr']",3,Specifies the information to be marked and its location. Gives recommendations for further information in documentation accompanying the frames or available separately. Annex A is for information only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 946:1975 - **Identifier:** ISO 946:1975 _(verified: appears in the quote below)_ - **Item title:** Grey cast iron — Beam unnotched impact test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 946 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 5366,IS,,ISO 946:1975,Grey cast iron — Beam unnotched impact test,Fonte grise — Essai de choc sur éprouvette non entaillée,1975-11-01,1,['77.040.10'],ISO/TC 25,9599,,[36166],"['en','fr']",3,"Specifies requirements for the determination of the impact strength. The test consists in breaking a series of unnotched machined cylindrical test pieces resting freely between supports, and measuring the difference between the kinetic energy of the hammer before and after fracture of the test piece. Annex A includes non-standard test pieces, annex B includes notes on coefficients for calculation of impact strength.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9462:1988 - **Identifier:** ISO 9462:1988 _(verified: appears in the quote below)_ - **Item title:** Alpine ski-bindings — Safety requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9462:1993 - **Withdrawn / published date:** 1988-07-07 _(verified: appears in the quote below)_ > 17191,IS,,ISO 9462:1988,Alpine ski-bindings — Safety requirements and test methods,Fixations de skis alpins — Exigences de sécurité et méthodes d'essai,1988-07-07,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[17192],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9462:1993 - **Identifier:** ISO 9462:1993 _(verified: appears in the quote below)_ - **Item title:** Alpine ski-bindings — Safety requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9462:2006 - **Withdrawn / published date:** 1993-05-13 _(verified: appears in the quote below)_ > 17192,IS,,ISO 9462:1993,Alpine ski-bindings — Safety requirements and test methods,Fixations de skis alpins — Prescriptions de sécurité et méthodes d'essai,1993-05-13,2,['97.220.20'],ISO/TC 83/SC 4,9599,[17191],[38625],"['en','fr']",13,"Specifies the main characteristics and describes, as an example, the test methods A and B (in method A, the ski is rigidly connected to the test frame, in method B, the test sole is rigidly connected to the test frame). Applies to ski-bindings for alpine skiing for children, juniors and adults.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9462:1993/Amd 1:2002 - **Identifier:** ISO 9462:1993/Amd 1:2002 _(verified: appears in the quote below)_ - **Item title:** Alpine ski-bindings — Safety requirements and test methods — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9462:2006 - **Withdrawn / published date:** 2002-06-13 _(verified: appears in the quote below)_ > 24478,IS,Amd,ISO 9462:1993/Amd 1:2002,Alpine ski-bindings — Safety requirements and test methods — Amendment 1,Fixations de skis alpins — Prescriptions de sécurité et méthodes d'essai — Amendement 1,2002-06-13,2,['97.220.20'],ISO/TC 83/SC 4,9599,,[38625],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9462:1993/Cor 1:1993 - **Identifier:** ISO 9462:1993/Cor 1:1993 _(verified: appears in the quote below)_ - **Item title:** Alpine ski-bindings — Safety requirements and test methods — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9462:2006 - **Withdrawn / published date:** 1993-07-22 _(verified: appears in the quote below)_ > 22600,IS,Cor,ISO 9462:1993/Cor 1:1993,Alpine ski-bindings — Safety requirements and test methods — Technical Corrigendum 1,Fixations de skis alpins — Prescriptions de sécurité et méthodes d'essai — Rectificatif technique 1,1993-07-22,2,['97.220.20'],ISO/TC 83/SC 4,9599,,[38625],"['en','fr']",1,Replaces figure B.1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9462:2006 - **Identifier:** ISO 9462:2006 _(verified: appears in the quote below)_ - **Item title:** Alpine ski-bindings — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9462:2014 - **Withdrawn / published date:** 2006-02-15 _(verified: appears in the quote below)_ > 38625,IS,,ISO 9462:2006,Alpine ski-bindings — Requirements and test methods,Fixations de skis alpins — Exigences et méthodes d'essai,2006-02-15,3,['97.220.20'],ISO/TC 83/SC 4,9599,"[17192,22600,24478]",[56106],"['en','fr']",35,"ISO 9462:2006 specifies the main characteristics of ski-bindings and describes, as an example, the test methods A and B.
ISO 9462:2006 applies to ski-bindings for alpine skiing for children, juniors and adults.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9462:2006/Amd 1:2009 - **Identifier:** ISO 9462:2006/Amd 1:2009 _(verified: appears in the quote below)_ - **Item title:** Alpine ski-bindings — Requirements and test methods — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9462:2014 - **Withdrawn / published date:** 2009-11-05 _(verified: appears in the quote below)_ > 52109,IS,Amd,ISO 9462:2006/Amd 1:2009,Alpine ski-bindings — Requirements and test methods — Amendment 1,Fixations de skis alpins — Exigences et méthodes d'essai — Amendement 1,2009-11-05,3,['97.220.20'],ISO/TC 83/SC 4,9599,,[56106],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9462:2014 - **Identifier:** ISO 9462:2014 _(verified: appears in the quote below)_ - **Item title:** Alpine ski-bindings — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9462:2023 - **Withdrawn / published date:** 2014-10-16 _(verified: appears in the quote below)_ > 56106,IS,,ISO 9462:2014,Alpine ski-bindings — Requirements and test methods,Fixations de skis alpins — Exigences et méthodes d'essai,2014-10-16,4,['97.220.20'],ISO/TC 83/SC 4,9599,"[52109,38625]",[79640],"['en','fr']",34,"ISO 9462:2014 specifies the main characteristics of ski-bindings and describes, as an example, the test methods A and B.
ISO 9462:2014 applies to ski-bindings for alpine skiing for children, juniors, and adults.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9463:1990 - **Identifier:** ISO 9463:1990 _(verified: appears in the quote below)_ - **Item title:** Nitric acid feed solutions from reprocessing plants — Spectrophotometric determination of plutonium after oxidation to plutonium(VI) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9463:2009 - **Withdrawn / published date:** 1990-12-20 _(verified: appears in the quote below)_ > 17193,IS,,ISO 9463:1990,Nitric acid feed solutions from reprocessing plants — Spectrophotometric determination of plutonium after oxidation to plutonium(VI),Solutions nitriques d'entrée des usines de retraitement — Dosage spectrophotométrique du plutonium après oxydation en plutonium(VI),1990-12-20,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[44276],"['en','fr']",5,"The method is applicable, without interference, in the presence of numerous cations, it is applicable to test portions containing between 0,5 mg and 2,5 mg of plutonium. Specifies principle, chemical conditions, reagents, apparatus, operating procedure, expression of results and interferences.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9463:2009 - **Identifier:** ISO 9463:2009 _(verified: appears in the quote below)_ - **Item title:** Nuclear energy — Nuclear fuel technology — Determination of plutonium in nitric acid solutions by spectrophotometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9463:2019 - **Withdrawn / published date:** 2009-08-04 _(verified: appears in the quote below)_ > 44276,IS,,ISO 9463:2009,Nuclear energy — Nuclear fuel technology — Determination of plutonium in nitric acid solutions by spectrophotometry,Énergie nucléaire — Technologie du combustible nucléaire — Détermination du plutonium dans les solutions d'acide nitrique par spectrophotométrie,2009-08-04,2,['27.120.30'],ISO/TC 85/SC 5,9599,[17193],[69143],"['en','fr']",8,"ISO 9463:2009 specifies an analytical method by spectrophotometry for determining the plutonium concentration of nitric acid solutions in reprocessing plants. The method is applicable, without interference, in the presence of numerous cations, with a standard deviation of about 5 %, where the concentration of plutonium in the solu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9465:1991 - **Identifier:** ISO 9465:1991 _(verified: appears in the quote below)_ - **Item title:** Alpine ski-bindings — Lateral release under impact loading — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9465:2012 - **Withdrawn / published date:** 1991-11-21 _(verified: appears in the quote below)_ > 17195,IS,,ISO 9465:1991,Alpine ski-bindings — Lateral release under impact loading — Test method,Fixations de skis alpins — Déclenchement latéral sous choc — Méthode d'essai,1991-11-21,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[55829],"['en','fr']",5,
Defines an impact test for establishing the maximum impulse for retention of a test ski on the test sole in the lateral direction. Specifies 17 terms and definitions. Annex A is for information only.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9467:1993 - **Identifier:** ISO 9467:1993 _(verified: appears in the quote below)_ - **Item title:** Forestry machinery — Portable chain-saws and brush-cutters — Exhaust system-caused fire risk _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9467:2023 | ISO/NP 9467 - **Withdrawn / published date:** 1993-10-28 _(verified: appears in the quote below)_ > 17197,IS,,ISO 9467:1993,Forestry machinery — Portable chain-saws and brush-cutters — Exhaust system-caused fire risk,Matériel forestier — Scies à chaîne et débroussailleuses portatives — Risque d'incendie provoqué par le système d'échappement,1993-10-28,1,['65.060.80'],ISO/TC 23/SC 17,9599,,"[83993,75036]","['en','fr']",5,"Establishes requirements and test methods. The requirements include: maximum temperatures for exhaust gases and exhaust system surfaces, maximum opening size for screen-type spark arresters, restriction on debris accumulation, durability and serviceability requirements. The test methods include: uniform procedures for measuring exhaust gas and exhaust system surface tem Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9473:1988 - **Identifier:** ISO 9473:1988 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Strip steel for dents of reeds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9473-2:2006 | ISO 9473-1:2006 - **Withdrawn / published date:** 1988-11-24 _(verified: appears in the quote below)_ > 17202,IS,,ISO 9473:1988,Textile machinery and accessories — Strip steel for dents of reeds,Matériel pour l'industrie textile — Fils plats en acier pour dents de peignes,1988-11-24,1,"['59.120.30','77.140.50']",ISO/TC 72/SC 3,9599,,"[34519,34517]","['en','fr']",2,"
The thickness from 0,1 mm to 1,6 mm are related to the widths from 3 mm to 12 mm. Tolerances are given.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9477:1992 - **Identifier:** ISO 9477:1992 _(verified: appears in the quote below)_ - **Item title:** High strength cast steels for general engineering and structural purposes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9477:2015 - **Withdrawn / published date:** 1992-05-07 _(verified: appears in the quote below)_ > 17206,IS,,ISO 9477:1992,High strength cast steels for general engineering and structural purposes,Aciers moulés à haute résistance pour construction mécanique et construction métallique d'usage général,1992-05-07,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[59269],"['en','fr']",3,"Specifies requirements for four grades of heat-treated cast carbon and alloy steels for service at ambient temperature. Where castings are produced by welding together component parts, it does not cover the welding process or the properties of the weldment. Properties at other temperatures may be agreed on through the use of the supplementary requirements in 9.4.1 or 9.4.4 of ISO 4990:1986.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9477:2015 - **Identifier:** ISO 9477:2015 _(verified: appears in the quote below)_ - **Item title:** High strength cast steels for general engineering and structural purposes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9477:2023 - **Withdrawn / published date:** 2015-09-08 _(verified: appears in the quote below)_ > 59269,IS,,ISO 9477:2015,High strength cast steels for general engineering and structural purposes,Aciers moulés à haute résistance pour construction mécanique et construction métallique d'usage général,2015-09-08,2,['77.140.80'],ISO/TC 17/SC 11,9599,[17206],[84182],['en'],2,"ISO 9477:2015 specifies requirements for four grades of heat treated cast carbon and alloy steels for general engineering and structural purposes.
In cases where castings are produced by welding component parts together, this International Standard does not cover the welding process or the properties of the weldment.
The four steel grades are intended for service at ambient temperature. However, properties Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9488:1999 - **Identifier:** ISO 9488:1999 _(verified: appears in the quote below)_ - **Item title:** Solar energy — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 9488 | ISO 9488:2022 - **Withdrawn / published date:** 1999-10-14 _(verified: appears in the quote below)_ > 17217,IS,,ISO 9488:1999,Solar energy — Vocabulary,Énergie solaire — Vocabulaire,1999-10-14,1,"['01.040.27','27.160']",ISO/TC 180,9599,,"[53735,74269]","['en','fr']",47, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 949:1978 - **Identifier:** ISO 949:1978 _(verified: appears in the quote below)_ - **Item title:** Cauliflowers — Guide to cold storage _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 949:1987 - **Withdrawn / published date:** 1978-12-01 _(verified: appears in the quote below)_ > 5370,IS,,ISO 949:1978,Cauliflowers — Guide to cold storage,Choux-fleurs — Guide pour l'entreposage par réfrigération,1978-12-01,1,['67.080.20'],ISO/TC 34,9599,,[5371],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 950:1979 - **Identifier:** ISO 950:1979 _(verified: appears in the quote below)_ - **Item title:** Cereals — Sampling (as grain) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13690:1999 - **Withdrawn / published date:** 1979-09-01 _(verified: appears in the quote below)_ > 5372,IS,,ISO 950:1979,Cereals — Sampling (as grain),Céréales — Échantillonnage (des grains),1979-09-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[22637],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9502:1989 - **Identifier:** ISO 9502:1989 _(verified: appears in the quote below)_ - **Item title:** Metallurgical-grade fluorspar — Determination of silica content — Reduced-molybdosilicate spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9502:1993 - **Withdrawn / published date:** 1989-12-07 _(verified: appears in the quote below)_ > 17229,IS,,ISO 9502:1989,Metallurgical-grade fluorspar — Determination of silica content — Reduced-molybdosilicate spectrometric method,Spaths fluor utilisables dans l'industrie métallurgique — Dosage de la silice — Méthode spectrométrique au molybdosilicate réduit,1989-12-07,1,['73.080'],ISO/TC 175,9599,,[17230],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9504:1990 - **Identifier:** ISO 9504:1990 _(verified: appears in the quote below)_ - **Item title:** Metallurgical-grade fluorspar — Determination of antimony content — Solvent extraction atomic absorption spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9504:1993 - **Withdrawn / published date:** 1990-06-14 _(verified: appears in the quote below)_ > 17232,IS,,ISO 9504:1990,Metallurgical-grade fluorspar — Determination of antimony content — Solvent extraction atomic absorption spectrometric method,Spaths fluor utilisables dans l'industrie métallurgique — Dosage de l'antimoine — Méthode par spectrométrie d'absorption atomique après extration,1990-06-14,1,['73.080'],ISO/TC 175,9599,,[17233],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9506-1:2000 - **Identifier:** ISO 9506-1:2000 _(verified: appears in the quote below)_ - **Item title:** Industrial automation systems — Manufacturing Message Specification — Part 1: Service definition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9506-1:2003 - **Withdrawn / published date:** 2000-08-31 _(verified: appears in the quote below)_ > 28059,IS,,ISO 9506-1:2000,Industrial automation systems — Manufacturing Message Specification — Part 1: Service definition,Systèmes d'automatisation industrielle — Spécification de messagerie industrielle — Partie 1: Définition des services,2000-08-31,1,['25.040.40'],ISO/TC 184/SC 5,9599,"[17235,25750,25752,21748,20119,19037]",[37079],['en'],427, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9506-2:2000 - **Identifier:** ISO 9506-2:2000 _(verified: appears in the quote below)_ - **Item title:** Industrial automation systems — Manufacturing Message Specification — Part 2: Protocol specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9506-2:2003 - **Withdrawn / published date:** 2000-08-31 _(verified: appears in the quote below)_ > 28061,IS,,ISO 9506-2:2000,Industrial automation systems — Manufacturing Message Specification — Part 2: Protocol specification,Systèmes d'automatisation industrielle — Spécification de messagerie industrielle — Partie 2: Spécification de protocole,2000-08-31,1,['25.040.40'],ISO/TC 184/SC 5,9599,"[25753,25751,17236,22976,20120]",[37080],['en'],171, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9507:1990 - **Identifier:** ISO 9507:1990 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of total iron content — Titanium(III) chloride reduction methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 2597-2 | ISO/CD 2597-2 - **Withdrawn / published date:** 1990-05-31 _(verified: appears in the quote below)_ > 17239,IS,,ISO 9507:1990,Iron ores — Determination of total iron content — Titanium(III) chloride reduction methods,Minerais de fer — Dosage du fer total — Méthodes par réduction au chlorure de titane(III),1990-05-31,1,['73.060.10'],ISO/TC 102/SC 2,9599,,"[25236,38362]","['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9509:1989 - **Identifier:** ISO 9509:1989 _(verified: appears in the quote below)_ - **Item title:** Water quality — Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste waters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9509:2006 - **Withdrawn / published date:** 1989-10-12 _(verified: appears in the quote below)_ > 17241,IS,,ISO 9509:1989,Water quality — Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste waters,Qualité de l'eau — Méthode pour l'évaluation de l'effet inhibiteur sur la nitrification par des micro-organismes de boues activées par des produits chimiques ou des eaux résiduaires,1989-10-12,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[34812],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 951:1979 - **Identifier:** ISO 951:1979 _(verified: appears in the quote below)_ - **Item title:** Pulses in bags — Sampling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13690:1999 - **Withdrawn / published date:** 1979-09-01 _(verified: appears in the quote below)_ > 5374,IS,,ISO 951:1979,Pulses in bags — Sampling,Légumineuses en sacs — Échantillonnage,1979-09-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[22637],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9512:1993 - **Identifier:** ISO 9512:1993 _(verified: appears in the quote below)_ - **Item title:** Cigarettes — Determination of ventilation — Definitions and measurement principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9512:2002 - **Withdrawn / published date:** 1993-03-25 _(verified: appears in the quote below)_ > 17244,IS,,ISO 9512:1993,Cigarettes — Determination of ventilation — Definitions and measurement principles,Cigarettes — Détermination du taux de ventilation — Définitions et principes de mesurage,1993-03-25,1,['65.160'],ISO/TC 126/SC 1,9599,,[31175],"['en','fr']",6,"
The principle of the method is drawing air in the standard smoking direction through an unlit cigarette at a constant flow, measuring the amount leaving the mouth end, partitioning and measuring separately the individual components of ventilation by the apparatus, calculating the degrees of ventilation. Applies in particular to the testing of cigarettes during manufacture.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9512:2002 - **Identifier:** ISO 9512:2002 _(verified: appears in the quote below)_ - **Item title:** Cigarettes — Determination of ventilation — Definitions and measurement principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9512:2019 - **Withdrawn / published date:** 2002-06-20 _(verified: appears in the quote below)_ > 31175,IS,,ISO 9512:2002,Cigarettes — Determination of ventilation — Definitions and measurement principles,Cigarettes — Détermination du taux de ventilation — Définitions et principes de mesurage,2002-06-20,2,['65.160'],ISO/TC 126/SC 1,9599,[17244],[73027],"['en','fr']",19,This International Standard specifies a method for the determination of ventilation which is applicable to cigarettes.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9513:1989 - **Identifier:** ISO 9513:1989 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Verification of extensometers used in uniaxial testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9513:1999 - **Withdrawn / published date:** 1989-11-09 _(verified: appears in the quote below)_ > 17245,IS,,ISO 9513:1989,Metallic materials — Verification of extensometers used in uniaxial testing,Matériaux métalliques — Vérification des extensomètres utilisés lors d'essais uniaxiaux,1989-11-09,1,['77.040.10'],ISO/TC 164/SC 1,9599,,[26859],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9513:1999 - **Identifier:** ISO 9513:1999 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Calibration of extensometers used in uniaxial testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9513:2012 - **Withdrawn / published date:** 1999-04-29 _(verified: appears in the quote below)_ > 26859,IS,,ISO 9513:1999,Metallic materials — Calibration of extensometers used in uniaxial testing,Matériaux métalliques — Étalonnage des extensomètres utilisés lors d'essais uniaxiaux,1999-04-29,2,['77.040.10'],ISO/TC 164/SC 1,9599,[17245],[41619],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9513:1999/Cor 1:2000 - **Identifier:** ISO 9513:1999/Cor 1:2000 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9513:2012 - **Withdrawn / published date:** 2000-06-22 _(verified: appears in the quote below)_ > 34163,IS,Cor,ISO 9513:1999/Cor 1:2000,Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1,Matériaux métalliques — Étalonnage des extensomètres utilisés lors d'essais uniaxiaux — Rectificatif technique 1,2000-06-22,2,['77.040.10'],ISO/TC 164/SC 1,9599,,[41619],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9514:1992 - **Identifier:** ISO 9514:1992 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Determination of the pot-life of liquid systems — Preparation and conditioning of samples and guidelines for testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9514:2005 - **Withdrawn / published date:** 1992-12-03 _(verified: appears in the quote below)_ > 17246,IS,,ISO 9514:1992,Paints and varnishes — Determination of the pot-life of liquid systems — Preparation and conditioning of samples and guidelines for testing,Peintures et vernis — Détermination du délai maximal d'utilisation après mélange des peintures liquides — Préparation et conditionnement des échantillons et lignes directrices pour les essais,1992-12-03,1,['87.040'],ISO/TC 35/SC 9,9599,,[37490],"['en','fr']",6,"Specifies a method, carried out under standard conditions, for preparing and storing a sample so that its pot-life may be assessed by measuring a particular property. The method is based on conditioning the components separately, then mixing and allowing the blend to sta Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9514:2005 - **Identifier:** ISO 9514:2005 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9514:2019 - **Withdrawn / published date:** 2005-04-14 _(verified: appears in the quote below)_ > 37490,IS,,ISO 9514:2005,Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing,Peintures et vernis — Détermination du délai maximal d'utilisation après mélange des systèmes de revêtement multicomposants — Préparation et conditionnement des échantillons et lignes directrices pour les essais,2005-04-14,2,['87.040'],ISO/TC 35/SC 9,9599,[17246],[77491],"['en','fr','ru']",7,"
ISO 9514:2005 describes a method, carried out under standard conditions, for preparing and storing a sample of a multicomponent coating system and subsequently assessing its pot life by measuring a particular property/ies.< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9517:1989 - **Identifier:** ISO 9517:1989 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of water soluble chloride content — Ion-selective electrode method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9517:2007 - **Withdrawn / published date:** 1989-12-14 _(verified: appears in the quote below)_ > 17249,IS,,ISO 9517:1989,Iron ores — Determination of water soluble chloride content — Ion-selective electrode method,Minerais de fer — Dosage des chlorures solubles dans l'eau — Méthode par électrode sélective des ions,1989-12-14,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[43951],"['en','fr']",8,"
The method ist applicable to a concentration range of 0,005 to 0,1 % (m/m) of water soluble chloride in natural iron ores, and iron ore concentrates and agglomerates including sinter products. Specifies principle, reagents, apparatus, sampling and samples, procedure, expression of results, and test report. Includes three annexes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9518:1992 - **Identifier:** ISO 9518:1992 _(verified: appears in the quote below)_ - **Item title:** Forestry machinery — Portable chain-saws — Kickback test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9518:1998 - **Withdrawn / published date:** 1992-06-18 _(verified: appears in the quote below)_ > 17250,IS,,ISO 9518:1992,Forestry machinery — Portable chain-saws — Kickback test,Matériel forestier — Scies à chaîne portatives — Essai de rebond,1992-06-18,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[24188],"['en','fr']",34, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9518:1998 - **Identifier:** ISO 9518:1998 _(verified: appears in the quote below)_ - **Item title:** Forestry machinery — Portable chain-saws — Kickback test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9518:2018 - **Withdrawn / published date:** 1998-10-01 _(verified: appears in the quote below)_ > 24188,IS,,ISO 9518:1998,Forestry machinery — Portable chain-saws — Kickback test,Matériel forestier — Scies à chaîne portatives — Essai de rebond,1998-10-01,2,['65.060.80'],ISO/TC 23/SC 17,9599,[17250],[55063],"['en','fr']",41, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9519:1990 - **Identifier:** ISO 9519:1990 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding and marine structures — Rungs for dog-step ladders _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9519:2023 - **Withdrawn / published date:** 1990-10-11 _(verified: appears in the quote below)_ > 17252,IS,,ISO 9519:1990,Shipbuilding and marine structures — Rungs for dog-step ladders,Construction navale et structures maritimes — Échelons pour marchepieds,1990-10-11,1,['47.020.50'],ISO/TC 8/SC 8,9599,[11529],[84130],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9523:1990 - **Identifier:** ISO 9523:1990 _(verified: appears in the quote below)_ - **Item title:** Touring ski-boots for adults — Interface with ski-binding _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9523:2008 - **Withdrawn / published date:** 1990-06-14 _(verified: appears in the quote below)_ > 17256,IS,,ISO 9523:1990,Touring ski-boots for adults — Interface with ski-binding,Chaussures de ski de randonnée pour adultes — Zones de jonction avec les fixations de skis,1990-06-14,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[45842],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9523:2008 - **Identifier:** ISO 9523:2008 _(verified: appears in the quote below)_ - **Item title:** Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9523:2015 - **Withdrawn / published date:** 2008-11-27 _(verified: appears in the quote below)_ > 45842,IS,,ISO 9523:2008,Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods,Chaussures de ski de randonnée pour adultes — Zone de contact avec les fixations de skis de randonnée — Exigences et méthodes d'essai,2008-11-27,2,['97.220.20'],ISO/TC 83/SC 4,9599,[17256],[63099],"['en','fr']",18,"ISO 9523:2008 specifies the dimensions and characteristics of the interface, requirements, test methods and marking of ski-boots with a rigid sole which are used with current systems of touring ski-bindings with attachment at the boot toe and boot heel, the proper release function of which depends on the dimensions and design of the interfaces.
For sk Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9523:2015 - **Identifier:** ISO 9523:2015 _(verified: appears in the quote below)_ - **Item title:** Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9523:2019 - **Withdrawn / published date:** 2015-07-24 _(verified: appears in the quote below)_ > 63099,IS,,ISO 9523:2015,Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods,Chaussures de ski de randonnée pour adultes — Zone de contact avec les fixations de skis de randonnée — Exigences et méthodes d'essai,2015-07-24,3,['97.220.20'],ISO/TC 83/SC 4,9599,[45842],[74869],"['en','fr']",20,"
ISO 9523:2015 specifies the dimensions and characteristics of the interface, requirements, test methods, and marking of ski-boots with a rigid sole which are used with current systems of touring ski-bindings with attachment at the boot toe and boot heel, the proper release function of which depends on the dimensions and design of the interfaces.
For s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9523:2019 - **Identifier:** ISO 9523:2019 _(verified: appears in the quote below)_ - **Item title:** Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9523:2023 - **Withdrawn / published date:** 2019-04-29 _(verified: appears in the quote below)_ > 74869,IS,,ISO 9523:2019,Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods,Chaussures de ski de randonnée pour adultes — Zone de contact avec les fixations de skis de randonnée — Exigences et méthodes d'essai,2019-04-29,4,['97.220.20'],ISO/TC 83/SC 4,9599,[63099],[84082],"['en','fr']",23,"
This document specifies the dimensions and characteristics of the interface, requirements, test methods, and marking of ski-boots with a rigid sole (see 3.5) which are used with current systems of touring ski-bindings with attachment at the boot toe and boot heel, the proper release function of which depends on the dimensions and design of the interfaces. 17260,IS,,ISO 9528:1989,"Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification","Aéronautique et espace — Tuyauteries flexibles en polytétrafluoréthylène (PTFE), série normale, classification 204 degrés C/21 000 kPa — Spécification d'approvisionnement",1989-12-07,1,"['83.140','49.080']",ISO/TC 20/SC 10,9599,,[17261],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9528:1989/Cor 1:1990 - **Identifier:** ISO 9528:1989/Cor 1:1990 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9528:1994 - **Withdrawn / published date:** 1990-09-06 _(verified: appears in the quote below)_ > 17262,IS,Cor,ISO 9528:1989/Cor 1:1990,"Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification — Technical Corrigendum 1","Aéronautique et espace — Tuyauteries flexibles en polytétrafluoréthylène (PTFE), série normale, classification 204 degrés C/21 000 kPa — Spécification d'approvisionnement — Rectificatif technique 1",1990-09-06,1,['49.080'],ISO/TC 20/SC 10,9599,,[17261],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9528:1994 - **Identifier:** ISO 9528:1994 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 9528 | ISO 9528:2022 - **Withdrawn / published date:** 1994-12-08 _(verified: appears in the quote below)_ > 17261,IS,,ISO 9528:1994,"Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification","Aéronautique et espace — Tuyauteries flexibles en polytétrafluoroéthylène (PTFE), série normale, classification 204 degrés C/21 000 kPa — Spécification d'approvisionnement",1994-12-08,2,"['83.140.40','49.080']",ISO/TC 20/SC 10,9599,"[17260,17262]","[68321,75273]","['en','fr']",14,
Cancels and replaces the first edition (1989). Specifies requirements for standard-weight polytetrafluoroethylene hose assemblies for use in aircraft hydraulic systems at temperatures between -55 °C and +204 °C and at a nominal pressure up to 21 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9533:1989 - **Identifier:** ISO 9533:1989 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery — Machine-mounted forward and reverse audible warning alarm — Sound test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9533:2010 - **Withdrawn / published date:** 1989-11-23 _(verified: appears in the quote below)_ > 17269,IS,,ISO 9533:1989,Earth-moving machinery — Machine-mounted forward and reverse audible warning alarm — Sound test method,Engins de terrassement — Avertisseurs sonores de marche avant et de marche arrière montés sur engins — Méthode d'essai acoustique,1989-11-23,1,['53.100'],ISO/TC 127/SC 2,9599,,[42250],"['en','fr']",6,"
Outlines the procedures and sets the criteria necessary to evaluate the audible performance of alarms mounted on earth-moving machines intended to warn personnel of the potential hazard of the machine moving under its own power, either forward or in reverse. The tests are carried out on a stationary machine. Applies to earth-moving machinery as defined in ISO 6165. 17274,IS,,ISO 9538:1996,Aerospace — Hydraulic tubing joints and fittings — Planar flexure test,Aéronautique et espace — Joints et raccords des tuyauteries hydrauliques — Essai de flexion plane,1996-01-25,1,['49.080'],ISO/TC 20/SC 10,9599,,[66049],"['en','fr']",5,"
Specifies a flexure test procedure for reconnectable and permanent hydraulik tube joints. This procedure is intended for conducting flexure tests on fittings with high-strength hydraulik tubes made of corrosion-resisting steel, nimonic, titanium and aluminium used on commercial and military aircraft.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9538:2017 - **Identifier:** ISO 9538:2017 _(verified: appears in the quote below)_ - **Item title:** Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9538:2025 - **Withdrawn / published date:** 2017-04-25 _(verified: appears in the quote below)_ > 66049,IS,,ISO 9538:2017,Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test,Série aérospatiale — Joints et raccords des tuyauteries hydrauliques — Essai de flexion plane,2017-04-25,2,['49.080'],ISO/TC 20/SC 10,9599,[17274],[86103],['en'],6,"ISO 9538:2017 specifies a flexure test procedure for reconnectable and permanent hydraulic tube joints.
This procedure is intended for conducting flexure tests on fittings with high-strength hydraulic tubes made of corrosion-resisting steel, titanium and aluminium for use on commercial and military aircraft.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9539:1988 - **Identifier:** ISO 9539:1988 _(verified: appears in the quote below)_ - **Item title:** Materials for equipment used in gas welding, cutting and allied processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9539:2010 - **Withdrawn / published date:** 1988-12-29 _(verified: appears in the quote below)_ > 17275,IS,,ISO 9539:1988,"Materials for equipment used in gas welding, cutting and allied processes","Matériaux utilisés pour les matériels de soudage aux gaz, coupage et techniques connexes",1988-12-29,1,['25.160.30'],ISO/TC 44/SC 8,9599,,[44988],"['en','fr']",2,"Specifies the general and special requirements on materials used for the construction of equipment used in gas welding, cutting and allied processes. Does not deal with materials used for the construction of welding hoses which are specified in ISO 3821
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9554:1991 - **Identifier:** ISO 9554:1991 _(verified: appears in the quote below)_ - **Item title:** Fibre ropes — General specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9554:2005 - **Withdrawn / published date:** 1991-04-25 _(verified: appears in the quote below)_ > 17300,IS,,ISO 9554:1991,Fibre ropes — General specification,Cordages — Spécifications générales,1991-04-25,1,['59.080.50'],ISO/TC 38,9599,,[36585],"['en','fr']",5,"Specifies the general characteristics of fibre ropes whatever their constituent material. Applies to all ropes conforming to ISO 1140, ISO 1141, ISO 1181, ISO 1346 and ISO 1969. Contains normative references, general, manufacture, lay, main characteristics and tolerances, marking, labelling, packaging, invoicing and delivered length, and examples of rope construction.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9554:2005 - **Identifier:** ISO 9554:2005 _(verified: appears in the quote below)_ - **Item title:** Fibre ropes — General specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9554:2010 - **Withdrawn / published date:** 2005-01-04 _(verified: appears in the quote below)_ > 36585,IS,,ISO 9554:2005,Fibre ropes — General specifications,Cordages en fibres — Spécifications générales,2005-01-04,2,['59.080.50'],ISO/TC 38,9599,[17300],[52378],"['en','fr']",19,"ISO 9554:2005 specifies the general characteristics of fibre ropes and their constituent materials. ISO 9554:2004 is intended to be used in conjunction with the standards for the individual types of fibre rope, which cover the physical properties and specific requirements for that particular product type.
ISO 9554:2005 also gives some information on the use of fibre ropes and also on their inspection and retirement criteria.
ISO 9554:2005 does not intend to address all of the safety matters associ Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9554:2010 - **Identifier:** ISO 9554:2010 _(verified: appears in the quote below)_ - **Item title:** Fibre ropes — General specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9554:2019 - **Withdrawn / published date:** 2010-08-02 _(verified: appears in the quote below)_ > 52378,IS,,ISO 9554:2010,Fibre ropes — General specifications,Cordages en fibres — Spécifications générales,2010-08-02,3,['59.080.50'],ISO/TC 38,9599,[36585],[72077],"['en','fr']",22,"
ISO 9554:2010 specifies the general characteristics of fibre ropes and their constituent materials. It is intended to be used in conjunction with the standards for the individual types of fibre rope, which cover the physical properties and specific requirements for that particular product type.
ISO 9554:2010 also gives some information on the use of fibre ropes and also on their inspection and retirement criteria.
ISO 9554:2010 does not intend to address all of the safety matters associated with i Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9555-2:1992 - **Identifier:** ISO 9555-2:1992 _(verified: appears in the quote below)_ - **Item title:** Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — Part 2: Radioactive tracers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 23607 - **Withdrawn / published date:** 1992-11-12 _(verified: appears in the quote below)_ > 4641,IS,,ISO 9555-2:1992,Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — Part 2: Radioactive tracers,Mesure de débit des liquides dans les canaux découverts — Méthodes de dilution en régime permanent utilisant des traceurs — Partie 2: Traceurs radioactifs,1992-11-12,1,['17.120.20'],ISO/TC 113,9599,,[76391],"['en','fr']",11,"
Describes the tracers used (bromine 82, tritium, iodine 131, indium 113 m, cesium 131, ytterbium 168), the tracer measurement (principle, field measurement and laboratory measurements), environmental factors affecting tracers, techniques for tracer injection, sampling techniques, estimation of uncertainties.
17302,IS,,ISO 9556:1989,Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace,Aciers et fontes — Dosage du carbone total — Méthode par absorption dans l'infrarouge après combustion dans un four à induction,1989-07-06,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[88045],"['en','fr']",8,"The method is applicable to carbon contents between 0,003% (m/m) and 4,5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. The annexes give additional information on the international co-operative tests, a graphical representation of precision data and features of induction furnaces an Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9562:1989 - **Identifier:** ISO 9562:1989 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of adsorbable organic halogens (AOX) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9562:1998 - **Withdrawn / published date:** 1989-09-07 _(verified: appears in the quote below)_ > 17307,IS,,ISO 9562:1989,Water quality — Determination of adsorbable organic halogens (AOX),Qualité de l'eau — Dosage des halogènes des composés organiques adsorbables (AOX),1989-09-07,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[28634],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9562:1998 - **Identifier:** ISO 9562:1998 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of adsorbable organically bound halogens (AOX) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9562:2004 - **Withdrawn / published date:** 1998-10-15 _(verified: appears in the quote below)_ > 28634,IS,,ISO 9562:1998,Water quality — Determination of adsorbable organically bound halogens (AOX),Qualité de l'eau — Dosage des halogènes adsorbables organiquement liés (AOX),1998-10-15,2,['13.060.50'],ISO/TC 147/SC 2,9599,[17307],[36918],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9563:1990 - **Identifier:** ISO 9563:1990 _(verified: appears in the quote below)_ - **Item title:** Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 9563 | ISO/NP 9563 | ISO 9563:2015 - **Withdrawn / published date:** 1990-09-06 _(verified: appears in the quote below)_ > 17308,IS,,ISO 9563:1990,Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method,"Transmissions par courroies — Conductibilité électrique des courroies synchrones sans fin, anti-électrostatiques — Spécification et méthode d'essai",1990-09-06,1,['21.220.10'],ISO/TC 41/SC 4,9599,,"[41584,56012,61639]","['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9564-1:1991 - **Identifier:** ISO 9564-1:1991 _(verified: appears in the quote below)_ - **Item title:** Banking — Personal Identification Number management and security — Part 1: PIN protection principles and techniques _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9564-1:2002 - **Withdrawn / published date:** 1991-12-18 _(verified: appears in the quote below)_ > 17309,IS,,ISO 9564-1:1991,Banking — Personal Identification Number management and security — Part 1: PIN protection principles and techniques,Banque — Gestion et sécurité du numéro personnel d'identification — Partie 1: Principes et techniques de protection du PIN,1991-12-18,1,['35.240.40'],ISO/TC 68/SC 2,9599,,[29374],"['en','fr']",28,"
Specifies the minimum security measures required for effective international PIN management. Annexes A and B form an integral part of this standard. Annexes C, D, E, F, G and H are for information only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9564-1:2002 - **Identifier:** ISO 9564-1:2002 _(verified: appears in the quote below)_ - **Item title:** Banking — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for online PIN handling in ATM and POS systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9564-1:2011 - **Withdrawn / published date:** 2002-05-02 _(verified: appears in the quote below)_ > 29374,IS,,ISO 9564-1:2002,Banking — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for online PIN handling in ATM and POS systems,Banque — Gestion et sécurité du numéro personnel d'identification (PIN) — Partie 1: Principes et exigence de base pour la gestion protection du PIN en ligne dans les systèmes ATM et POS,2002-05-02,2,['35.240.40'],ISO/TC 68/SC 2,9599,[17309],[54083],['en'],30,"This part of ISO 9564 specifies the basic principles and techniques which provide the minimum security measures required for effective international PIN management. These measures are applicable to those institutions responsible for implementing tec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9564-1:2011 - **Identifier:** ISO 9564-1:2011 _(verified: appears in the quote below)_ - **Item title:** Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9564-1:2017 - **Withdrawn / published date:** 2011-02-07 _(verified: appears in the quote below)_ > 54083,IS,,ISO 9564-1:2011,Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems,Services financiers — Gestion et sécurité du numéro personnel d'identification (PIN) — Partie 1: Principes de base et exigences relatifs aux PINs dans les systèmes à carte,2011-02-07,3,['35.240.40'],ISO/TC 68/SC 2,9599,"[29374,35124]",[68669],['en'],29,"
ISO 9564-1:2011 specifies the basic principles and techniques which provide the minimum security measures required for effective international personal identification number (PIN) management. These measures are applicable to those institutions responsible for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9564-1:2011/Amd 1:2015 - **Identifier:** ISO 9564-1:2011/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9564-1:2017 - **Withdrawn / published date:** 2015-03-05 _(verified: appears in the quote below)_ > 61447,IS,Amd,ISO 9564-1:2011/Amd 1:2015,Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems — Amendment 1,Services financiers — Gestion et sécurité du numéro personnel d'identification (PIN) — Partie 1: Principes de base et exigences relatifs aux PINs dans les systèmes à carte — Amendement 1,2015-03-05,3,['35.240.40'],ISO/TC 68/SC 2,9599,,[68669],['en'],6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9564-2:1991 - **Identifier:** ISO 9564-2:1991 _(verified: appears in the quote below)_ - **Item title:** Banking — Personal Identification Number management and security — Part 2: Approved algorithm(s) for PIN encipherment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9564-2:2005 | ISO/WD 9564-2 - **Withdrawn / published date:** 1991-12-18 _(verified: appears in the quote below)_ > 17310,IS,,ISO 9564-2:1991,Banking — Personal Identification Number management and security — Part 2: Approved algorithm(s) for PIN encipherment,Banque — Gestion et sécurité du numéro personnel d'identification — Partie 2: Algorithme(s) approuvé(s) pour le chiffrement du PIN,1991-12-18,1,['35.240.40'],ISO/TC 68/SC 2,9599,,"[36289,29375]","['en','fr']",1,
Specifies the definition of the data encryption algorithm (DEA) as given in ANSI X3.92:1981.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9564-2:2005 - **Identifier:** ISO 9564-2:2005 _(verified: appears in the quote below)_ - **Item title:** Banking — Personal Identification Number management and security — Part 2: Approved algorithms for PIN encipherment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9564-2:2014 - **Withdrawn / published date:** 2005-01-24 _(verified: appears in the quote below)_ > 36289,IS,,ISO 9564-2:2005,Banking — Personal Identification Number management and security — Part 2: Approved algorithms for PIN encipherment,Banque — Gestion et sécurité du numéro personnel d'identification (PIN) — Partie 2: Algorithmes approuvés pour le chiffrement du PIN,2005-01-24,2,['35.240.40'],ISO/TC 68/SC 2,9599,[17310],[61448],['en'],2,"ISO 9564-2:2005 specifies algorithms for the encipherment of Personal Identification Numbers (PINs). Based on the approval processes established in ISO 9564-1, these are the data encryption algorithm (DEA) and the RSA encryption algorithm.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9564-2:2014 - **Identifier:** ISO 9564-2:2014 _(verified: appears in the quote below)_ - **Item title:** Financial services — Personal Identification Number (PIN) management and security — Part 2: Approved algorithms for PIN encipherment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9564-2:2025 - **Withdrawn / published date:** 2014-07-22 _(verified: appears in the quote below)_ > 61448,IS,,ISO 9564-2:2014,Financial services — Personal Identification Number (PIN) management and security — Part 2: Approved algorithms for PIN encipherment,Services financiers — Gestion et sécurité du numéro personnel d'identification (PIN) — Partie 2: Algorithmes approuvés pour le chiffrement du PIN,2014-07-22,3,['35.240.40'],ISO/TC 68/SC 2,9599,[36289],[87565],['en'],2,ISO 9564-2:2014 specifies approved algorithms for the encipherment of Personal Identification Numbers (PINs).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9564-3:2003 - **Identifier:** ISO 9564-3:2003 _(verified: appears in the quote below)_ - **Item title:** Banking — Personal Identification Number management and security — Part 3: Requirements for offline PIN handling in ATM and POS systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9564-1:2011 - **Withdrawn / published date:** 2003-11-10 _(verified: appears in the quote below)_ > 35124,IS,,ISO 9564-3:2003,Banking — Personal Identification Number management and security — Part 3: Requirements for offline PIN handling in ATM and POS systems,Banque — Gestion et sécurité du numéro personnel d'identification — Partie 3: Exigences relatives à la protection du PIN pour traitement du PIN hors ligne dans les systèmes ATM et POS,2003-11-10,1,['35.240.40'],ISO/TC 68/SC 2,9599,,[54083],['en'],5,ISO 9564-3:2003 specifies the minimum security measures required for offline PIN handling and a standard means of interchanging PIN data in an offline environment. It is applicable to financial transaction card-originated transactions requiring offline PIN verification and to those ins Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9584:1993 - **Identifier:** ISO 9584:1993 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9584:2023 - **Withdrawn / published date:** 1993-10-07 _(verified: appears in the quote below)_ > 17350,IS,,ISO 9584:1993,Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants,Implants chirurgicaux — Essais non destructifs — Contrôle radiographique des implants chirurgicaux métalliques moulés,1993-10-07,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[79957],"['en','fr']",4,
The method for detecting and evaluating internal imperfections shall be performed in accordance with the requirements in ISO 1027 and ISO 5579. Guidance on the acceptance limits for internal imperfections is given in annex A.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9587:1999 - **Identifier:** ISO 9587:1999 _(verified: appears in the quote below)_ - **Item title:** Metallic and other inorganic coatings — Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9587:2007 - **Withdrawn / published date:** 1999-09-30 _(verified: appears in the quote below)_ > 17353,IS,,ISO 9587:1999,Metallic and other inorganic coatings — Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement,Revêtements métalliques et autres revêtements inorganiques — Prétraitements du fer ou de l'acier pour diminuer le risque de fragilisation par l'hydrogène,1999-09-30,1,"['25.220.20','25.220.40']",ISO/TC 107/SC 3,9599,,[45971],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9587:2007 - **Identifier:** ISO 9587:2007 _(verified: appears in the quote below)_ - **Item title:** Metallic and other inorganic coatings — Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 24251-1:2025 - **Withdrawn / published date:** 2007-11-06 _(verified: appears in the quote below)_ > 45971,IS,,ISO 9587:2007,Metallic and other inorganic coatings — Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement,Revêtements métalliques et autres revêtements inorganiques — Prétraitements du fer ou de l'acier visant à réduire le risque de fragilisation par l'hydrogène,2007-11-06,2,"['25.220.20','25.220.40']",ISO/TC 107/SC 3,9599,[17353],[78213],"['en','fr','ru']",3,"ISO 9587:2007 establishes stress-relief requirements for high strength steels, in order to reduce their susceptibility or degree of susceptibility to hydrogen embrittlement in subsequent pretreatment, electroplating, autocatalytic plating, chemical conversion and phosphating processes. This Internati Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9588:1999 - **Identifier:** ISO 9588:1999 _(verified: appears in the quote below)_ - **Item title:** Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9588:2007 - **Withdrawn / published date:** 1999-10-28 _(verified: appears in the quote below)_ > 17354,IS,,ISO 9588:1999,Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement,Revêtements métalliques et autres revêtements inorganiques — Traitements après revêtement sur fer ou acier pour diminuer le risque de fragilisation par l'hydrogène,1999-10-28,1,"['25.220.20','25.220.40']",ISO/TC 107/SC 3,9599,,[45972],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9588:2007 - **Identifier:** ISO 9588:2007 _(verified: appears in the quote below)_ - **Item title:** Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 24251-1:2025 - **Withdrawn / published date:** 2007-12-06 _(verified: appears in the quote below)_ > 45972,IS,,ISO 9588:2007,Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement,Revêtements métalliques et autres revêtements inorganiques — Traitements après revêtement sur fer ou acier pour diminuer le risque de fragilisation par l'hydrogène,2007-12-06,2,"['25.220.20','25.220.40']",ISO/TC 107/SC 3,9599,[17354],[78213],"['en','fr','ru']",5,"
ISO 9588:2007 specifies procedures for reducing susceptibility, or degree of susceptibility, to hydrogen embrittlement that can arise in surface finishing processes.
The heat-treatment procedures for iron or steel specified in ISO 9588:2007 have been shown to be effective in r Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 959-1:1989 - **Identifier:** ISO 959-1:1989 _(verified: appears in the quote below)_ - **Item title:** Pepper (Piper nigrum Linnaeus), whole or ground — Specification — Part 1: Black pepper _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 959-1:1998 - **Withdrawn / published date:** 1989-11-09 _(verified: appears in the quote below)_ > 5384,IS,,ISO 959-1:1989,"Pepper (Piper nigrum Linnaeus), whole or ground — Specification — Part 1: Black pepper","Poivre (Piper nigrum Linnaeus), entier ou en poudre — Spécifications — Partie 1: Poivre noir",1989-11-09,1,['67.220.10'],ISO/TC 34/SC 7,9599,[5383],[27319],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 959-1:1998 - **Identifier:** ISO 959-1:1998 _(verified: appears in the quote below)_ - **Item title:** Pepper (Piper nigrum L.), whole or ground — Specification — Part 1: Black pepper _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 959-1:2026 - **Withdrawn / published date:** 1998-05-14 _(verified: appears in the quote below)_ > 27319,IS,,ISO 959-1:1998,"Pepper (Piper nigrum L.), whole or ground — Specification — Part 1: Black pepper","Poivre (Piper nigrum L.), entier ou en poudre — Spécifications — Partie 1: Poivre noir",1998-05-14,2,['67.220.10'],ISO/TC 34/SC 7,9599,[5384],[86620],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 959-2:1989 - **Identifier:** ISO 959-2:1989 _(verified: appears in the quote below)_ - **Item title:** Pepper (Piper nigrum Linnaeus), whole or ground — Specification — Part 2: White pepper _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 959-2:1998 - **Withdrawn / published date:** 1989-11-09 _(verified: appears in the quote below)_ > 5385,IS,,ISO 959-2:1989,"Pepper (Piper nigrum Linnaeus), whole or ground — Specification — Part 2: White pepper","Poivre (Piper nigrum Linnaeus), entier ou en poudre — Spécifications — Partie 2: Poivre blanc",1989-11-09,1,['67.220.10'],ISO/TC 34/SC 7,9599,[5383],[27320],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 959-2:1998 - **Identifier:** ISO 959-2:1998 _(verified: appears in the quote below)_ - **Item title:** Pepper (Piper nigrum L.), whole or ground — Specification — Part 2: White pepper _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 959-2:2026 - **Withdrawn / published date:** 1998-05-14 _(verified: appears in the quote below)_ > 27320,IS,,ISO 959-2:1998,"Pepper (Piper nigrum L.), whole or ground — Specification — Part 2: White pepper","Poivre (Piper nigrum L.), entier ou en poudre — Spécifications — Partie 2: Poivre blanc",1998-05-14,2,['67.220.10'],ISO/TC 34/SC 7,9599,[5385],[86621],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9591:1992 - **Identifier:** ISO 9591:1992 _(verified: appears in the quote below)_ - **Item title:** Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9591:2004 - **Withdrawn / published date:** 1992-02-06 _(verified: appears in the quote below)_ > 17357,IS,,ISO 9591:1992,Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking,Corrosion des alliages d'aluminium — Détermination de la résistance à la corrosion fissurante sous contrainte,1992-02-06,1,['77.060'],ISO/TC 156,9599,,[29292],"['en','fr']",6,"
Specifies the general principles, the apparatus and materials, the sampling, the specimens, the procedure, the assessment of results and the test report. Describes the grain orientation examination.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9597:1989 - **Identifier:** ISO 9597:1989 _(verified: appears in the quote below)_ - **Item title:** Cements — Test methods — Determination of setting time and soundness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9597:2008 | ISO/DIS 9597 - **Withdrawn / published date:** 1989-08-31 _(verified: appears in the quote below)_ > 17409,IS,,ISO 9597:1989,Cements — Test methods — Determination of setting time and soundness,Ciments — Méthodes d'essai — Détermination du temps de prise et de la stabilité,1989-08-31,1,['91.100.10'],ISO/TC 74,9599,,"[45571,30141]","['en','fr']",6,Describes the reference procedure. The setting time is determined by observing the penetration of a needle into cement paste of standard consistence until it reaches a specified value. The soundness is determined by observing the volume expansion of cement paste of standard consistence as indicated by the relative movement of two needles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9598:1989 - **Identifier:** ISO 9598:1989 _(verified: appears in the quote below)_ - **Item title:** Seamless steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10893-3:2011 - **Withdrawn / published date:** 1989-07-06 _(verified: appears in the quote below)_ > 17410,IS,,ISO 9598:1989,Seamless steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections,Tubes en acier sans soudure pour service sous pression — Contrôle par flux de fuite à l'aide de palpeurs magnétiques sur toute la circonférence des tubes d'aciers ferromagnétiques pour la détection des imperfections transversales,1989-07-06,1,"['77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,[44678],"['en','fr']",6,"Applicable to the inspection of tubes with an outside diameter greater than or equal to 9 mm. Specifies general requirements, method of test, reference standards, ref Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9599:1991 - **Identifier:** ISO 9599:1991 _(verified: appears in the quote below)_ - **Item title:** Copper, lead and zinc sulfide concentrates — Determination of hygroscopic moisture in the analysis sample — Gravimetric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9599:2015 - **Withdrawn / published date:** 1991-02-14 _(verified: appears in the quote below)_ > 17411,IS,,ISO 9599:1991,"Copper, lead and zinc sulfide concentrates — Determination of hygroscopic moisture in the analysis sample — Gravimetric method","Concentrés sulfurés de cuivre, de plomb et de zinc — Détermination de l'humidité hygroscopique dans l'échantillon pour analyse — Méthode gravimétrique",1991-02-14,1,['73.060.99'],ISO/TC 183,9599,,[63361],"['en','fr']",5,"
The method given is applicable to copper, lead and zinc sulfide concentrates free from volatile organic flotation reagents, e.g. kerosene, and with hygroscopic moisture contents between 0,05 % (m/m) and 2 % (m/m). It is used to correct the analysis results from the equilibrated moisture level to the dry basis. This metho Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 96-1:1992 - **Identifier:** ISO 96-1:1992 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Rings and travellers for ring spinning and ring doubling frames — Part 1: T-rings and their appropriate travellers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 96-1:2009 - **Withdrawn / published date:** 1992-01-23 _(verified: appears in the quote below)_ > 3762,IS,,ISO 96-1:1992,Textile machinery and accessories — Rings and travellers for ring spinning and ring doubling frames — Part 1: T-rings and their appropriate travellers,Matériel pour l'industrie textile — Anneaux et curseurs pour machines à filer et à retordre — Partie 1: Anneaux 'T' et leurs curseurs appropriés,1992-01-23,1,['59.120.10'],ISO/TC 72/SC 1,9599,"[7084,3761]",[43450],"['en','fr']",3,"
Specifies the principal dimensions of T-rings, the mass, the tolerance on the mass, wire section, range of numbers of the appropriate travellers for these rings. Includes the designation method for the travellers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 96-1:2009 - **Identifier:** ISO 96-1:2009 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames — Part 1: Flange rings T and SF and their travellers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 96-1:2016 - **Withdrawn / published date:** 2009-03-10 _(verified: appears in the quote below)_ > 43450,IS,,ISO 96-1:2009,Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames — Part 1: Flange rings T and SF and their travellers,Matériel pour l'industrie textile — Anneaux et curseurs pour machines à filer et à retordre — Partie 1: Anneaux T et SF et leurs curseurs,2009-03-10,2,['59.120.10'],ISO/TC 72/SC 1,9599,[3762],[67510],['en'],4,"ISO 96-1:2009 specifies the principal dimensions of T- and SF-rings, and the mass and tolerance on the mass, of the appropriate travellers for flange rings employed on ring spinning and ring twisting machines. It also specifies the designation method for the travellers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 96:1981 - **Identifier:** ISO 96:1981 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for 'C' and 'EL' travellers — Principal dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 96-1:1992 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 3761,IS,,ISO 96:1981,Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for 'C' and 'EL' travellers — Principal dimensions,Matériel pour l'industrie textile — Anneaux à filer et à retordre pour curseurs 'C' et 'EL' — Dimensions principales,1981-11-01,1,['59.120.10'],ISO/TC 72/SC 1,9599,[3760],[3762],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 96-2:1992 - **Identifier:** ISO 96-2:1992 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Rings and travellers for ring spinning and ring doubling frames — Part 2: HZCH-, HZ- and J-rings and their appropriate travellers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 96-2:2009 - **Withdrawn / published date:** 1992-01-23 _(verified: appears in the quote below)_ > 3763,IS,,ISO 96-2:1992,"Textile machinery and accessories — Rings and travellers for ring spinning and ring doubling frames — Part 2: HZCH-, HZ- and J-rings and their appropriate travellers","Matériel pour l'industrie textile — Anneaux et curseurs pour machines à filer et à retordre — Partie 2: Anneaux 'HZCH', 'HZ' et' J' et leurs curseurs appropriés",1992-01-23,1,['59.120.10'],ISO/TC 72/SC 1,9599,"[7794,7084,3764]",[43451],"['en','fr']",6,"Specifies the principal dimensions of HZCH-, HZ- and J-rings, the mass, the tolerance on the mass, wire section, range of numbers of the appropriate travellers for these rings. Includes the designation method for the travellers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 960:1988 - **Identifier:** ISO 960:1988 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polyamides (PA) — Determination of water content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 15512:1999 - **Withdrawn / published date:** 1988-08-18 _(verified: appears in the quote below)_ > 5387,IS,,ISO 960:1988,Plastics — Polyamides (PA) — Determination of water content,Plastiques — Polyamides (PA) — Détermination de la teneur en eau,1988-08-18,1,['83.080.20'],ISO/TC 61/SC 9,9599,[5386],[27994],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9606-1:1994 - **Identifier:** ISO 9606-1:1994 _(verified: appears in the quote below)_ - **Item title:** Approval testing of welders — Fusion welding — Part 1: Steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 9606-1 | ISO 9606-1:2012 | ISO/DIS 9606-1.3 - **Withdrawn / published date:** 1994-08-04 _(verified: appears in the quote below)_ > 17418,IS,,ISO 9606-1:1994,Approval testing of welders — Fusion welding — Part 1: Steels,Qualification des soudeurs — Soudage par fusion — Partie 1: Aciers,1994-08-04,1,['25.160.01'],ISO/TC 44/SC 11,9599,,"[30011,54936,41878]","['en','fr']",26,"Specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of steels. The recommended format for the certificate of approval testing is given in annex B. Applies to the approval testing of welders for the fusion welding of steels. Covers approval testing of welders for work on semifinished and finished products made from wrought, forg Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9606-1:1994/Amd 1:1998 - **Identifier:** ISO 9606-1:1994/Amd 1:1998 _(verified: appears in the quote below)_ - **Item title:** Approval testing of welders — Fusion welding — Part 1: Steels — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 9606-1 | ISO 9606-1:2012 | ISO/DIS 9606-1.3 - **Withdrawn / published date:** 1998-07-23 _(verified: appears in the quote below)_ > 28046,IS,Amd,ISO 9606-1:1994/Amd 1:1998,Approval testing of welders — Fusion welding — Part 1: Steels — Amendment 1,Qualification des soudeurs — Soudage par fusion — Partie 1: Aciers — Amendement 1,1998-07-23,1,['25.160.01'],ISO/TC 44/SC 11,9599,,"[30011,54936,41878]","['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9606-2:1994 - **Identifier:** ISO 9606-2:1994 _(verified: appears in the quote below)_ - **Item title:** Approval testing of welders — Fusion welding — Part 2: Aluminium and aluminium alloys _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9606-2:2004 - **Withdrawn / published date:** 1994-08-04 _(verified: appears in the quote below)_ > 17419,IS,,ISO 9606-2:1994,Approval testing of welders — Fusion welding — Part 2: Aluminium and aluminium alloys,Qualification des soudeurs — Soudage par fusion — Partie 2: Aluminium et ses alliages,1994-08-04,1,['25.160.01'],ISO/TC 44/SC 11,9599,,[40769],"['en','fr']",24,"
Specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of aluminium. The recommended format for the certificate of approval testing is given in annex A. Applies to the approval testing of welders for the fusion welding of aluminium using a gas shield. Covers approval testing of welders for work on semi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9606-2:1994/Amd 1:1998 - **Identifier:** ISO 9606-2:1994/Amd 1:1998 _(verified: appears in the quote below)_ - **Item title:** Approval testing of welders — Fusion welding — Part 2: Aluminium and aluminium alloys — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9606-2:2004 - **Withdrawn / published date:** 1998-07-23 _(verified: appears in the quote below)_ > 28060,IS,Amd,ISO 9606-2:1994/Amd 1:1998,Approval testing of welders — Fusion welding — Part 2: Aluminium and aluminium alloys — Amendment 1,Qualification des soudeurs — Soudage par fusion — Partie 2: Aluminium et ses alliages — Amendement 1,1998-07-23,1,['25.160.01'],ISO/TC 44/SC 11,9599,,[40769],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9608:1988 - **Identifier:** ISO 9608:1988 _(verified: appears in the quote below)_ - **Item title:** V-belts — Uniformity of belts — Centre distance variation — Specifications and test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9608:1994 - **Withdrawn / published date:** 1988-12-15 _(verified: appears in the quote below)_ > 17421,IS,,ISO 9608:1988,V-belts — Uniformity of belts — Centre distance variation — Specifications and test method,Courroies trapézoïdales — Uniformité des courroies — Variations d'entraxe — Spécifications et méthode d'essai,1988-12-15,1,['21.220.10'],ISO/TC 41/SC 1,9599,,[22746],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9608:1994 - **Identifier:** ISO 9608:1994 _(verified: appears in the quote below)_ - **Item title:** V-belts — Uniformity of belts — Test method for determination of centre distance variation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9608:2022 - **Withdrawn / published date:** 1994-08-11 _(verified: appears in the quote below)_ > 22746,IS,,ISO 9608:1994,V-belts — Uniformity of belts — Test method for determination of centre distance variation,Courroies trapézoïdales — Uniformité des courroies — Méthode d'essai permettant de déterminer les variations d'entraxe,1994-08-11,2,['21.220.10'],ISO/TC 41/SC 1,9599,[17421],[83112],"['en','fr']",2,
Cancels and replaces the first edition (1988). Specifies a test method for determining the centre distance variation of V-belt drives as a criterion for the uniformity of V-belts.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 184](https://referencesource.org/iso-standard-supersessions/p/184/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 186](https://referencesource.org/iso-standard-supersessions/p/186/) Last verified: 2026-08-05. Review by: 2027-02-02.