ISO 8968-5|IDF 20-5:2001 specifies a method for the direct determination of the protein-nitrogen content of liquid milk, whole or skimmed.
An alternative indirect method using calculations is also described.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8969:1990 - **Identifier:** ISO 8969:1990 _(verified: appears in the quote below)_ - **Item title:** Timber structures — Testing of unilateral punched metal plate fasterners and joints _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8969:2011 - **Withdrawn / published date:** 1990-03-01 _(verified: appears in the quote below)_ > 16492,IS,,ISO 8969:1990,Timber structures — Testing of unilateral punched metal plate fasterners and joints,Structures en bois — Essai des connecteurs métalliques de fixation à dents embouties unilatéralement et des assemblages,1990-03-01,1,['91.080.20'],ISO/TC 165,9599,,[46314],"['en','fr']",9,"Specifies methods for determining strength and stiffness. The different specimens for load-slip characteristics of the contact surface of plate and timber under load parallel and perpendicular to the grain, for plate tensile strength, plate compression strength, and plate shear strength are shown in figures. Load-slip curves are given for shear tests. Annex A specifies a method for testing the nai Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 897:1973 - **Identifier:** ISO 897:1973 _(verified: appears in the quote below)_ - **Item title:** Photography — Edge-marked roll film — Identification of the emulsion side _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 897:1988 | ISO 897:2000 - **Withdrawn / published date:** 1973-10-01 _(verified: appears in the quote below)_ > 5289,IS,,ISO 897:1973,Photography — Edge-marked roll film — Identification of the emulsion side,"Photographie — Pellicules en bobines, marquées sur les bords — Identification du côté émulsionné",1973-10-01,1,['37.040.20'],ISO/TC 42,9599,,"[5290,32372]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 897:1988 - **Identifier:** ISO 897:1988 _(verified: appears in the quote below)_ - **Item title:** Photography — Roll films, 126, 110 and 135 size films — Identification of the image-bearing side _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 897:2000 - **Withdrawn / published date:** 1988-09-22 _(verified: appears in the quote below)_ > 5290,IS,,ISO 897:1988,"Photography — Roll films, 126, 110 and 135 size films — Identification of the image-bearing side","Photographie — Films en bobines et films en formats 126, 110 et 135 — Identification de la face portant l'image",1988-09-22,2,['37.040.20'],ISO/TC 42,9599,[5289],[32372],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8970:1989 - **Identifier:** ISO 8970:1989 _(verified: appears in the quote below)_ - **Item title:** Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8970:2010 - **Withdrawn / published date:** 1989-06-22 _(verified: appears in the quote below)_ > 16493,IS,,ISO 8970:1989,Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density,Structures en bois — Essai des assemblages réalisés par organes mécaniques — Exigences concernant la masse volumique du bois,1989-06-22,1,['91.080.20'],ISO/TC 165,9599,,[50689],"['en','fr']",2,"
Two methods for the selection of the density of wood for specimens to be used in determining strength and stiffness properties are specified, which are equally applicable. It is assumed that the wood density is normally distributed with a coefficient of variation of about 0.15 and that the density is only one of the properties influencing the strength of a joint. The other re Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8970:2010 - **Identifier:** ISO 8970:2010 _(verified: appears in the quote below)_ - **Item title:** Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8970:2020 - **Withdrawn / published date:** 2010-05-31 _(verified: appears in the quote below)_ > 50689,IS,,ISO 8970:2010,Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density,Structures en bois — Essai des assemblages réalisés par organes mécaniques — Exigences concernant la masse volumique du bois,2010-05-31,2,['91.080.20'],ISO/TC 165,9599,[16493],[69944],"['en','fr']",3,"
ISO 8970:2010 specifies a method, based on density, for the selection of pieces of wood used in determining the strength and stiffness properties of connections made with mechanical fasteners.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8974:1988 - **Identifier:** ISO 8974:1988 _(verified: appears in the quote below)_ - **Item title:** Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8974:1997 - **Withdrawn / published date:** 1988-11-24 _(verified: appears in the quote below)_ > 16497,IS,,ISO 8974:1988,Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography,Plastiques — Résines phénoliques — Dosage du phénol résiduel par chromatographie en phase gazeuse,1988-11-24,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[24124],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8974:1997 - **Identifier:** ISO 8974:1997 _(verified: appears in the quote below)_ - **Item title:** Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8974:2002 - **Withdrawn / published date:** 1997-11-27 _(verified: appears in the quote below)_ > 24124,IS,,ISO 8974:1997,Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography,Plastiques — Résines phénoliques — Dosage du phénol résiduel par chromatographie en phase gazeuse,1997-11-27,2,['83.080.10'],ISO/TC 61/SC 12,9599,[16497],[29947],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8976:1988 - **Identifier:** ISO 8976:1988 _(verified: appears in the quote below)_ - **Item title:** Pliers and nippers — Multiple slip joint pliers — Dimensions and test values _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8976:2004 - **Withdrawn / published date:** 1988-08-18 _(verified: appears in the quote below)_ > 16499,IS,,ISO 8976:1988,Pliers and nippers — Multiple slip joint pliers — Dimensions and test values,Pinces et tenailles — Pinces multiprises — Dimensions et valeurs d'essai,1988-08-18,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[33645],"['en','fr']",2,"Specifies the principal dimensions of multiple slip joint pliers with a single joint, with a tongue and groove and with a box joint. It also specifies test values for the pliers to verify their aptitude to function in conformity with ISO 5744. general technical requirements are given in ISO 5743. The pliers illustrated in ISO 8976 are only examples and are not intended to affect the manufacturers' design.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8976:2004 - **Identifier:** ISO 8976:2004 _(verified: appears in the quote below)_ - **Item title:** Pliers and nippers — Multiple slip joint pliers — Dimensions and test values _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8976:2021 - **Withdrawn / published date:** 2004-09-29 _(verified: appears in the quote below)_ > 33645,IS,,ISO 8976:2004,Pliers and nippers — Multiple slip joint pliers — Dimensions and test values,Pinces et tenailles — Pinces multiprises — Dimensions et valeurs d'essai,2004-09-29,2,['25.140.30'],ISO/TC 29/SC 10,9599,[16499],[79501],"['en','fr']",4,ISO 8976:2004 specifies the principal dimensions of multiple slip joint pliers. It also specifies test values for the pliers to verify their aptitude to function in conformity with ISO 5744. General technical requirements are given in ISO 5743.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8977:1987 - **Identifier:** ISO 8977:1987 _(verified: appears in the quote below)_ - **Item title:** Tools for pressing — Round matrixes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8977:2003 - **Withdrawn / published date:** 1987-10-08 _(verified: appears in the quote below)_ > 16500,IS,,ISO 8977:1987,Tools for pressing — Round matrixes,Outillage de presse — Matrices rondes,1987-10-08,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[30348],"['en','fr']",2,"Lays down the basic dimensions and tolerances in millimetres for round matrixes in the outside diameter range of 5 to 50 mm. Gives example of materials and ahrdness, and specifies a designation of matrixes. The main use of matrixes defined in ISO 8977 is for punching holes in steel sheet of other materials.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8978:1987 - **Identifier:** ISO 8978:1987 _(verified: appears in the quote below)_ - **Item title:** Tools for pressing — Guides for round punches _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 8978 - **Withdrawn / published date:** 1987-10-01 _(verified: appears in the quote below)_ > 16501,IS,,ISO 8978:1987,Tools for pressing — Guides for round punches,Outillage de presse —Guides pour poinçons ronds,1987-10-01,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[30349],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8979:1988 - **Identifier:** ISO 8979:1988 _(verified: appears in the quote below)_ - **Item title:** Pliers and nippers for electronics — Nomenclature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8979:2004 - **Withdrawn / published date:** 1988-10-20 _(verified: appears in the quote below)_ > 16502,IS,,ISO 8979:1988,Pliers and nippers for electronics — Nomenclature,Pinces pour l'électronique — Nomenclature,1988-10-20,1,"['25.140.30','01.040.25']",ISO/TC 29/SC 10,9599,,[33646],"['en','fr','ru']",13,"The figures in ISO 8979 are given as examples only and are not intended to affect the manufacturers' design. The pliers and nippers may be supplied with or without return springs or sleeves. The cutting nippers may be supplied with a safety device (lead catcher). In addition to terms in English, French and Russian ISO 8979 gives the equivalent terms in the German, Italian and Spanish languages.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-1:1978 - **Identifier:** ISO 898-1:1978 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners — Part 1: Bolts, screws and studs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-1:1988 - **Withdrawn / published date:** 1978-12-01 _(verified: appears in the quote below)_ > 5291,IS,,ISO 898-1:1978,"Mechanical properties of fasteners — Part 1: Bolts, screws and studs","Caractéristiques mécaniques des éléments de fixation — Partie 1: Boulons, vis et goujons",1978-12-01,1,['21.060.10'],ISO/TC 2,9599,,[5292],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-1:1988 - **Identifier:** ISO 898-1:1988 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners — Part 1: Bolts, screws and studs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-1:1999 - **Withdrawn / published date:** 1988-02-18 _(verified: appears in the quote below)_ > 5292,IS,,ISO 898-1:1988,"Mechanical properties of fasteners — Part 1: Bolts, screws and studs",Caractéristiques mécaniques des éléments de fixation — Partie 1: Vis et goujons,1988-02-18,2,['21.060.10'],ISO/TC 2,9599,"[5291,5295]",[25452],"['en','fr']",18, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-1:1999 - **Identifier:** ISO 898-1:1999 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 898-1 | ISO 898-1:2009 - **Withdrawn / published date:** 1999-08-26 _(verified: appears in the quote below)_ > 25452,IS,,ISO 898-1:1999,"Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs",Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié — Partie 1: Vis et goujons,1999-08-26,3,['21.060.10'],ISO/TC 2,9599,[5292],"[33851,43383]","['en','fr']",27, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-1:2009 - **Identifier:** ISO 898-1:2009 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-1:2013 - **Withdrawn / published date:** 2009-03-31 _(verified: appears in the quote below)_ > 43383,IS,,ISO 898-1:2009,"Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread","Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié — Partie 1: Vis, goujons et tiges filetées de classes de qualité spécifiées — Filetages à pas gros et filetages à pas fin",2009-03-31,4,['21.060.10'],ISO/TC 2/SC 11,9599,[25452],[60610],"['en','fr']",57,"ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-2:1980 - **Identifier:** ISO 898-2:1980 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners — Part 2: Nuts with specified proof load values _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-2:1992 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 5293,IS,,ISO 898-2:1980,Mechanical properties of fasteners — Part 2: Nuts with specified proof load values,Caractéristiques mécaniques des éléments de fixation — Partie 2: Écrous avec charges d'épreuve spécifiées,1980-08-01,1,['21.060.20'],ISO/TC 2,9599,"[5295,5296]",[5294],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-2:1992 - **Identifier:** ISO 898-2:1992 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners — Part 2: Nuts with specified proof load values — Coarse thread _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-2:2012 - **Withdrawn / published date:** 1992-11-12 _(verified: appears in the quote below)_ > 5294,IS,,ISO 898-2:1992,Mechanical properties of fasteners — Part 2: Nuts with specified proof load values — Coarse thread,Caractéristiques mécaniques des éléments de fixation — Partie 2: Écrous avec charges d'épreuve spécifiées — Filetages à pas gros,1992-11-12,2,['21.060.20'],ISO/TC 2/SC 12,9599,[5293],[46228],"['en','fr']",16,"
Applies to nuts with nominal thread diameters up to and including 39 mm, specific mechanical requirements, widths across flats as specified in ISO 272, nominal heights greater than or equal to half the nominal diameter of the internal thread, made of carbon steel or low alloy steel. Does not apply to nuts requiring special properties (such as weldability, corrosi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-2:2012 - **Identifier:** ISO 898-2:2012 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-2:2022 | ISO/NP 898-2 - **Withdrawn / published date:** 2012-03-16 _(verified: appears in the quote below)_ > 46228,IS,,ISO 898-2:2012,Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread,Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié — Partie 2: Écrous de classes de qualité spécifiées — Filetages à pas gros et filetages à pas fin,2012-03-16,3,['21.060.20'],ISO/TC 2/SC 12,9599,"[5294,5299]","[79349,70259]","['en','fr']",21,"
This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch
thread made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C.
Nuts Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-4:1972 - **Identifier:** ISO 898-4:1972 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 898/4-1972 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-2:1980 - **Withdrawn / published date:** 1972-08-01 _(verified: appears in the quote below)_ > 5296,IS,,ISO 898-4:1972,Withdrawal of ISO 898/4-1972,Annulation de l'ISO 898/4-1970,1972-08-01,1,['21.060.20'],ISO/TC 2,9599,,[5293],['en'],8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-5:1980 - **Identifier:** ISO 898-5:1980 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners — Part 5: Set screws and similar threaded fasteners not under tensile stresses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-5:1998 - **Withdrawn / published date:** 1980-07-01 _(verified: appears in the quote below)_ > 5297,IS,,ISO 898-5:1980,Mechanical properties of fasteners — Part 5: Set screws and similar threaded fasteners not under tensile stresses,Propriétés mécaniques des éléments de fixation — Partie 5: Vis sans tête et éléments de fixation filetés similaires non soumis à des contraintes de traction,1980-07-01,1,['21.060.10'],ISO/TC 2,9599,,[25453],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-5:1998 - **Identifier:** ISO 898-5:1998 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-5:2012 - **Withdrawn / published date:** 1998-07-23 _(verified: appears in the quote below)_ > 25453,IS,,ISO 898-5:1998,Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses,Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié — Partie 5: Vis sans tête et éléments de fixation filetés similaires non soumis à des contraintes de traction,1998-07-23,2,['21.060.10'],ISO/TC 2/SC 11,9599,[5297],[54038],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-6:1988 - **Identifier:** ISO 898-6:1988 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-6:1994 - **Withdrawn / published date:** 1988-06-02 _(verified: appears in the quote below)_ > 5298,IS,,ISO 898-6:1988,Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread,Caractéristiques mécaniques des éléments de fixation — Partie 6: Écrous avec charges d'épreuve spécifiées — Filetages à pas fin,1988-06-02,1,['21.060.20'],ISO/TC 2,9599,,[5299],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 898-6:1994 - **Identifier:** ISO 898-6:1994 _(verified: appears in the quote below)_ - **Item title:** Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 898-2:2012 - **Withdrawn / published date:** 1994-12-15 _(verified: appears in the quote below)_ > 5299,IS,,ISO 898-6:1994,Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread,Caractéristiques mécaniques des éléments de fixation — Partie 6: Écrous avec charges d'épreuve spécifiées — Filetage à pas fin,1994-12-15,2,['21.060.20'],ISO/TC 2/SC 12,9599,[5298],[46228],"['en','fr']",9,"
Cancels and replaces the first edition (1988). Specifies the mechanical properties of nuts with specified proof load values when tested at an ambient temperature range of +10 °C to +35 °C. Applies to nuts with nominal thread diameters from 8 mm up to and including 39 mm, of triangular ISO thread, with diameter/pitch combinations in accordance with ISO 261, with Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-1:1992 - **Identifier:** ISO 8980-1:1992 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Finished single-vision corrective lenses — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-1:1996 - **Withdrawn / published date:** 1992-02-06 _(verified: appears in the quote below)_ > 16503,IS,,ISO 8980-1:1992,Ophthalmic optics — Finished single-vision corrective lenses — Part 1: General requirements,Optique ophtalmique — Verres correcteurs unifocaux finis — Partie 1: Spécifications générales,1992-02-06,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[22504],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-1:1996 - **Identifier:** ISO 8980-1:1996 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-1:2004 - **Withdrawn / published date:** 1996-01-25 _(verified: appears in the quote below)_ > 22504,IS,,ISO 8980-1:1996,Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 1: Spécifications pour les verres unifocaux et multifocaux,1996-01-25,2,['11.040.70'],ISO/TC 172/SC 7,9599,[16503],[34274],"['en','fr']",6,
Gives requirements for the optical and geometrical properties for uncut finished single-vision and multifocal spectacle lenses.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-1:2004 - **Identifier:** ISO 8980-1:2004 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-1:2017 - **Withdrawn / published date:** 2004-01-28 _(verified: appears in the quote below)_ > 34274,IS,,ISO 8980-1:2004,Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 1: Spécifications pour les verres unifocaux et multifocaux,2004-01-28,3,['11.040.70'],ISO/TC 172/SC 7,9599,[22504],[65163],"['en','fr','ru']",9,ISO 8980-1:2004 specifies requirements for the optical and geometrical properties for uncut finished single-vision and multifocal spectacle lenses.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-1:2004/Cor 1:2006 - **Identifier:** ISO 8980-1:2004/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-1:2017 - **Withdrawn / published date:** 2006-07-26 _(verified: appears in the quote below)_ > 44516,IS,Cor,ISO 8980-1:2004/Cor 1:2006,Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses — Technical Corrigendum 1,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 1: Spécifications pour les verres unifocaux et multifocaux — Rectificatif technique 1,2006-07-26,3,['11.040.70'],ISO/TC 172/SC 7,9599,,[65163],"['en','fr','ru']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-2:1996 - **Identifier:** ISO 8980-2:1996 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-2:2004 - **Withdrawn / published date:** 1996-01-25 _(verified: appears in the quote below)_ > 22505,IS,,ISO 8980-2:1996,Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 2: Spécifications pour les verres progressifs,1996-01-25,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[34275],"['en','fr']",8,Gives requirements for the optical and geometrical properties for uncut finished progressive power spectacle lenses.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-2:2004 - **Identifier:** ISO 8980-2:2004 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-2:2017 - **Withdrawn / published date:** 2004-01-28 _(verified: appears in the quote below)_ > 34275,IS,,ISO 8980-2:2004,Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 2: Spécifications pour les verres progressifs,2004-01-28,2,['11.040.70'],ISO/TC 172/SC 7,9599,[22505],[65162],"['en','fr','ru']",8,ISO 8980-2:2004 specifies requirements for the optical and geometrical properties for uncut finished progressive spectacle lenses.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-2:2004/Cor 1:2006 - **Identifier:** ISO 8980-2:2004/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-2:2017 - **Withdrawn / published date:** 2006-07-26 _(verified: appears in the quote below)_ > 44517,IS,Cor,ISO 8980-2:2004/Cor 1:2006,Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses — Technical Corrigendum 1,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 2: Spécifications pour les verres progressifs — Rectificatif technique 1,2006-07-26,2,['11.040.70'],ISO/TC 172/SC 7,9599,,[65162],"['en','fr','ru']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-3:1999 - **Identifier:** ISO 8980-3:1999 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-3:2003 - **Withdrawn / published date:** 1999-06-17 _(verified: appears in the quote below)_ > 16505,IS,,ISO 8980-3:1999,Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 3: Spécifications relatives au facteur de transmission et méthodes d'essai,1999-06-17,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[35227],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-3:2003 - **Identifier:** ISO 8980-3:2003 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-3:2013 - **Withdrawn / published date:** 2003-10-17 _(verified: appears in the quote below)_ > 35227,IS,,ISO 8980-3:2003,Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 3: Spécifications relatives au facteur de transmission et méthodes d'essai,2003-10-17,2,['11.040.70'],ISO/TC 172/SC 7,9599,[16505],[51052],"['en','fr']",15,ISO 8980-3:2003 specifies requirements for the transmittance properties of uncut finished spectacle lenses.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-3:2013 - **Identifier:** ISO 8980-3:2013 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-3:2022 - **Withdrawn / published date:** 2013-09-23 _(verified: appears in the quote below)_ > 51052,IS,,ISO 8980-3:2013,Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 3: Spécifications relatives au facteur de transmission et méthodes d'essai,2013-09-23,3,['11.040.70'],ISO/TC 172/SC 7,9599,[35227],[75921],"['en','fr']",31,"ISO 8980-1:2013 specifies requirements for the transmittance properties of uncut finished spectacle lenses and mounted pairs, including attenuation of solar radiation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-4:2000 - **Identifier:** ISO 8980-4:2000 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-4:2006 | ISO/WD 8980-4 - **Withdrawn / published date:** 2000-05-18 _(verified: appears in the quote below)_ > 27465,IS,,ISO 8980-4:2000,Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 4: Spécifications et méthodes d'essai relatives aux traitements antireflet,2000-05-18,1,['11.040.70'],ISO/TC 172/SC 7,9599,,"[40122,35228]","['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8980-4:2006 - **Identifier:** ISO 8980-4:2006 _(verified: appears in the quote below)_ - **Item title:** Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8980-4:2026 - **Withdrawn / published date:** 2006-08-10 _(verified: appears in the quote below)_ > 40122,IS,,ISO 8980-4:2006,Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings,Optique ophtalmique — Verres de lunettes finis non détourés — Partie 4: Spécifications et méthodes d'essai relatives aux traitements antireflet,2006-08-10,2,['11.040.70'],ISO/TC 172/SC 7,9599,[27465],[89601],"['en','fr']",18,"ISO 8980-4:2006 specifies optical and non optical requirements, including durability, and test methods for anti-reflective coatings on spectacle lenses.
ISO 8980-4:2006 does not deal with the following topics:
The types of polybutene plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties density and melt flow rate and on information about basic polymer parameters, intended application and/or method of processing, important properties, additives, colorants, fillers and reinforc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8986-1:2009 - **Identifier:** ISO 8986-1:2009 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21302-1:2019 - **Withdrawn / published date:** 2009-10-30 _(verified: appears in the quote below)_ > 45084,IS,,ISO 8986-1:2009,Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de polybutène-1 (PB-1) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2009-10-30,2,['83.080.20'],ISO/TC 61/SC 9,9599,[16515],[70504],"['en','fr','ru']",6,"
ISO 8986-1:2009 establishes a system of designation for polybutene‑1 (PB‑1) thermoplastic materials which may be used as the basis for specifications.
The types of polybutene plastics are differentiated from each other by a classification system based on appropriate levels of the designatory property melt volume-flow Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8986-2:1995 - **Identifier:** ISO 8986-2:1995 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8986-2:2009 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 21109,IS,,ISO 8986-2:1995,Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polybutène (PB) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1995-08-24,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[45085],"['en','fr']",5,
Specifies methods of preparation of test specimens and test methods to be used for the determination of the properties of polybutene moulding and extrusion materials. Specifies requirements for handling test material and for conditioning and gives properties and test methods which are necessary to characterize PB moulding and extrusion ma Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8986-2:1995/Amd 1:2000 - **Identifier:** ISO 8986-2:1995/Amd 1:2000 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8986-2:2009 - **Withdrawn / published date:** 2000-06-08 _(verified: appears in the quote below)_ > 31648,IS,Amd,ISO 8986-2:1995/Amd 1:2000,Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1,Plastiques — Polybutène (PB) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés — Amendement 1,2000-06-08,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[45085],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8986-2:2009 - **Identifier:** ISO 8986-2:2009 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21302-2:2019 - **Withdrawn / published date:** 2009-10-30 _(verified: appears in the quote below)_ > 45085,IS,,ISO 8986-2:2009,Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux à base de polybutène-1 (PB-1) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2009-10-30,2,['83.080.20'],ISO/TC 61/SC 9,9599,"[31648,21109]",[70505],"['en','fr','ru']",6,"
ISO 8986-2:2009 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polybutene‑1 (PB‑1) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8987:1988 - **Identifier:** ISO 8987:1988 _(verified: appears in the quote below)_ - **Item title:** Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8987:1995 - **Withdrawn / published date:** 1988-11-24 _(verified: appears in the quote below)_ > 16516,IS,,ISO 8987:1988,Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate,Plastiques — Résines phénoliques — Méthode d'évaluation de la réactivité sur plaque d'essai de transformation au stade B,1988-11-24,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[24004],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8987:1995 - **Identifier:** ISO 8987:1995 _(verified: appears in the quote below)_ - **Item title:** Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8987:2005 - **Withdrawn / published date:** 1995-12-27 _(verified: appears in the quote below)_ > 24004,IS,,ISO 8987:1995,Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate,Plastiques — Résines phénoliques — Méthode d'évaluation de la réactivité sur plaque d'essai de transformation au stade B,1995-12-27,2,['83.080.10'],ISO/TC 61/SC 12,9599,[16516],[36286],"['en','fr']",3,
Gives methods for the determination of the B-transformation time of phenolic resins at a specified temperature and under specified conditions on a heated test plate. Replaces the first edition.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8988:1989 - **Identifier:** ISO 8988:1989 _(verified: appears in the quote below)_ - **Item title:** Plastics — Phenolic resins — Determination of hexamethylenetetramine content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8988:1995 - **Withdrawn / published date:** 1989-03-09 _(verified: appears in the quote below)_ > 16517,IS,,ISO 8988:1989,Plastics — Phenolic resins — Determination of hexamethylenetetramine content,Plastiques — Résines phénoliques — Dosage de l'hexaméthylènetétramine,1989-03-09,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[25124],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8988:1995 - **Identifier:** ISO 8988:1995 _(verified: appears in the quote below)_ - **Item title:** Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method and perchloric acid method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8988:2006 - **Withdrawn / published date:** 1995-04-20 _(verified: appears in the quote below)_ > 25124,IS,,ISO 8988:1995,Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method and perchloric acid method,Plastiques — Résines phénoliques — Détermination de la teneur en hexaméthylènetétramine — Méthode Kjeldahl et méthode à l'acide perchlorique,1995-04-20,2,['83.080.10'],ISO/TC 61/SC 12,9599,[16517],[36285],"['en','fr']",4,Cancels and replaces the first edition (1989). Specifies two methods for the determination of the hexamethylenetetramine ('hexa') content of phenolic resins. They are equivalent. The Kjeldahl method is not applicable if there are other components containing nitrogen in the phenolic resin. The perchloric acid method is only appli Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8989:1988 - **Identifier:** ISO 8989:1988 _(verified: appears in the quote below)_ - **Item title:** Plastics — Liquid phenolic resins — Determination of water miscibility _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8989:1995 - **Withdrawn / published date:** 1988-11-24 _(verified: appears in the quote below)_ > 16518,IS,,ISO 8989:1988,Plastics — Liquid phenolic resins — Determination of water miscibility,Plastiques — Résines phénoliques liquides — Détermination de la tolérance à l'eau,1988-11-24,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[24003],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 899-1:1993 - **Identifier:** ISO 899-1:1993 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of creep behaviour — Part 1: Tensile creep _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 899-1:2003 - **Withdrawn / published date:** 1993-12-23 _(verified: appears in the quote below)_ > 5302,IS,,ISO 899-1:1993,Plastics — Determination of creep behaviour — Part 1: Tensile creep,Plastiques — Détermination du comportement au fluage — Partie 1: Fluage en traction,1993-12-23,1,['83.080.01'],ISO/TC 61/SC 2,9599,"[13013,5301]",[31262],"['en','fr']",8,"
Specifies a method for determining the tensile creep of plastics in the form of standard test specimens under specified conditions such as those of pretreatment, temperature and humidity. The method is suitable for use with rigid and semi-rigid non-reinforced, filled and fibre-reinforced plastics materials in the form of dumb-bell-shaped test specimens moulded directly or machined from sheets or moulded articles. It is intended to Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 899-1:2003 - **Identifier:** ISO 899-1:2003 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of creep behaviour — Part 1: Tensile creep _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 899-1 | ISO 899-1:2017 - **Withdrawn / published date:** 2003-06-03 _(verified: appears in the quote below)_ > 31262,IS,,ISO 899-1:2003,Plastics — Determination of creep behaviour — Part 1: Tensile creep,Plastiques — Détermination du comportement au fluage — Partie 1: Fluage en traction,2003-06-03,2,['83.080.01'],ISO/TC 61/SC 2,9599,[5302],"[57704,72819]","['en','fr']",15,"
ISO 899-1:2003 specifies a method for determining the tensile creep of plastics in the form of standard test specimens under specified conditions such as those of pretreatment, temperature and humidity.
The method is suitable for use with rigid and semi-rigid non-reinforced, filled and fibre-reinforced plastics materials (see ISO 472 for definitions) in the form of dumb-bell-shaped test specimens moulded directly or machin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 899-1:2003/Amd 1:2015 - **Identifier:** ISO 899-1:2003/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 899-1:2017 - **Withdrawn / published date:** 2015-03-10 _(verified: appears in the quote below)_ > 60781,IS,Amd,ISO 899-1:2003/Amd 1:2015,Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1,Plastiques — Détermination du comportement au fluage — Partie 1: Fluage en traction — Amendement 1,2015-03-10,2,['83.080.01'],ISO/TC 61/SC 2,9599,,[72819],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 899:1981 - **Identifier:** ISO 899:1981 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of tensile creep _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 899-1:1993 | ISO 899-2:1993 - **Withdrawn / published date:** 1981-04-01 _(verified: appears in the quote below)_ > 5301,IS,,ISO 899:1981,Plastics — Determination of tensile creep,Plastiques — Détermination du fluage en traction,1981-04-01,1,['83.080'],ISO/TC 61/SC 2,9599,,"[5302,5303]","['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 899-2:1993 - **Identifier:** ISO 899-2:1993 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 899-2:2003 - **Withdrawn / published date:** 1993-12-23 _(verified: appears in the quote below)_ > 5303,IS,,ISO 899-2:1993,Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading,Plastiques — Détermination du comportement au fluage — Partie 2: Fluage en flexion par mise en charge en trois points,1993-12-23,1,['83.080.01'],ISO/TC 61/SC 2,9599,"[13013,5301]",[31263],"['en','fr']",7,"
Specifies a method for determining the flexural creep of plastics in the form of standard test specimens under specified conditions such as those of pretreatment, temperature and humidity. The method is suitable for use with rigid and semi-rigid non-reinforced, filled and fibre-reinforced plastics materials in the form of rectangular bars moulded directly or cut from sheets Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 899-2:2003 - **Identifier:** ISO 899-2:2003 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 899-2:2024 - **Withdrawn / published date:** 2003-06-03 _(verified: appears in the quote below)_ > 31263,IS,,ISO 899-2:2003,Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading,Plastiques — Détermination du comportement au fluage — Partie 2: Fluage en flexion par mise en charge en trois points,2003-06-03,2,['83.080.01'],ISO/TC 61/SC 2,9599,[5303],[84391],"['en','fr']",14,"
ISO 899-2:2003 specifies a method for determining the flexural creep of plastics in the form of standard test specimens under specified conditions such as those of pretreatment, temperature and humidity. It applies only to a simple freely supported beam loaded at mid-span (three-point-loading test).
The method is suitable for use with rigid and semi-rigid non-reinforced, fi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 899-2:2003/Amd 1:2015 - **Identifier:** ISO 899-2:2003/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 899-2:2024 - **Withdrawn / published date:** 2015-03-10 _(verified: appears in the quote below)_ > 60782,IS,Amd,ISO 899-2:2003/Amd 1:2015,Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1,Plastiques — Détermination du comportement au fluage — Partie 2: Fluage en flexion par mise en charge en trois points — Amendement 1,2015-03-10,2,['83.080.01'],ISO/TC 61/SC 2,9599,,[84391],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8992:1986 - **Identifier:** ISO 8992:1986 _(verified: appears in the quote below)_ - **Item title:** Fasteners — General requirements for bolts, screws, studs and nuts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8992:2005 - **Withdrawn / published date:** 1986-11-27 _(verified: appears in the quote below)_ > 16521,IS,,ISO 8992:1986,"Fasteners — General requirements for bolts, screws, studs and nuts","Éléments de fixation — Prescriptions générales relatives aux vis, goujons et écrous",1986-11-27,1,"['21.060.10','21.060.20']",ISO/TC 2/SC 7,9599,,[38531],"['en','fr']",2,"
Requires that standardized products are defined by: mechanical properties (material), product grade (tolerances), surface coatings (if required), special requirements (if agreed); gives specifications and reference to International Standards.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8993:1989 - **Identifier:** ISO 8993:1989 _(verified: appears in the quote below)_ - **Item title:** Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Chart method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8993:2010 - **Withdrawn / published date:** 1989-04-13 _(verified: appears in the quote below)_ > 16522,IS,,ISO 8993:1989,Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Chart method,Aluminium et alliages d'aluminium anodisés — Système de cotation de la corrosion par piqûres — Méthode reposant sur des images-types,1989-04-13,1,"['25.220.20','77.060']",ISO/TC 79/SC 2,9599,,[51498],"['en','fr']",9,"Specifies a chart rating system based on standard charts that provides a means of defining levels of performance of anodic oxide coatings that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion of the basis metal resulting from accelerated tests, exposure to corrosive environments and practical servic Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8993:2010 - **Identifier:** ISO 8993:2010 _(verified: appears in the quote below)_ - **Item title:** Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8993:2018 - **Withdrawn / published date:** 2010-07-22 _(verified: appears in the quote below)_ > 51498,IS,,ISO 8993:2010,Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method,Anodisation de l'aluminium et de ses alliages — Système de cotation de la corrosion par piqûres — Méthode reposant sur des images-types,2010-07-22,2,"['25.220.20','77.060']",ISO/TC 79/SC 2,9599,[16522],[72175],"['en','fr']",11,"
ISO 8993:2010 specifies a chart rating system based on standard charts that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests.
This rating system is applicable to pitting corrosion resulting from
Defines levels of performance of anodic oxide coatings that have been subjected to corrosion tests. The rating system is applicable to pitting corrosion of the basis metal resulting from accelerated tests, exposure to corrosive environments and practical service tests. It is frequently used for rating the results of short term corrosion tests on relatively t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8994:2011 - **Identifier:** ISO 8994:2011 _(verified: appears in the quote below)_ - **Item title:** Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8994:2018 - **Withdrawn / published date:** 2011-02-16 _(verified: appears in the quote below)_ > 51497,IS,,ISO 8994:2011,Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method,Anodisation de l'aluminium et de ses alliages — Système de cotation de la corrosion par piqûres — Méthode par quadrillage,2011-02-16,2,"['25.220.20','77.060']",ISO/TC 79/SC 2,9599,[16523],[72813],"['en','fr']",4,"
ISO 8994:2011 specifies a grid rating system that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests.
This rating system is applicable to pitting corrosion resulting from
This standard specifies lighting requirements for indoor work places and for people to perform
the visual tasks efficiently, in comfort and safety throughout the whole work period.
This standard does not explain how lighting systems or techniques should be
designed to optimise solutions for specific work places. These may be found in the relevant
CIE guides and reports.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8995-1:2002/Cor 1:2005 - **Identifier:** ISO 8995-1:2002/Cor 1:2005 _(verified: appears in the quote below)_ - **Item title:** Lighting of work places — Part 1: Indoor — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CIE 8995-1:2025 - **Withdrawn / published date:** 2005-09-12 _(verified: appears in the quote below)_ > 43196,IS,Cor,ISO 8995-1:2002/Cor 1:2005,Lighting of work places — Part 1: Indoor — Technical Corrigendum 1,Éclairage des lieux de travail — Partie 1: Intérieur — Rectificatif technique 1,2005-09-12,1,"['13.180','91.160.10']",ISO/TC 274,9599,,[76342],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8995:1989 - **Identifier:** ISO 8995:1989 _(verified: appears in the quote below)_ - **Item title:** Principles of visual ergonomics — The lighting of indoor work systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8995-1:2002 - **Withdrawn / published date:** 1989-09-21 _(verified: appears in the quote below)_ > 16524,IS,,ISO 8995:1989,Principles of visual ergonomics — The lighting of indoor work systems,Principes d'ergonomie visuelle — L'éclairage des systèmes de travail intérieurs,1989-09-21,1,"['13.180','91.160.10']",ISO/TC 159/SC 5,9599,,[28857],"['en','fr']",27,"Identifies the parameters that influence visual performance. It also presents the criteria that have to be satisfied in order to achieve an acceptable visual environment. Is applicable to working areas in industrial buildings, offices and hospitals, but not to those working areas of low luminance used for such activities as projection, viewing of transparencies, and handling of photosensitive materials.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8995-3:2006 - **Identifier:** ISO 8995-3:2006 _(verified: appears in the quote below)_ - **Item title:** Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CIE 8995-3:2018 - **Withdrawn / published date:** 2006-10-20 _(verified: appears in the quote below)_ > 44630,IS,,ISO 8995-3:2006,Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places,Éclairage des lieux de travail — Partie 3: Exigences requises de l'éclairage des lieux de travail extérieurs en matière de sûreté et de sécurité,2006-10-20,1,"['13.180','91.160.10']",ISO/TC 274,9599,[43429],[70593],['en'],5,ISO 8995-3:2006 specifies the lighting requirements which will contribute to the visual needs for safety and security within outdoor work places
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8996:1990 - **Identifier:** ISO 8996:1990 _(verified: appears in the quote below)_ - **Item title:** Ergonomics — Determination of metabolic heat production _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8996:2004 - **Withdrawn / published date:** 1990-12-20 _(verified: appears in the quote below)_ > 16525,IS,,ISO 8996:1990,Ergonomics — Determination of metabolic heat production,Ergonomie — Détermination de la production de chaleur métabolique,1990-12-20,1,['13.180'],ISO/TC 159/SC 5,9599,,[34251],"['en','fr']",17,"Specifies methods for determining the metabolic rate, but can also be used for other applications, e.g. for the assessment of working practices, the cost of specific jobs or sport activities, the total cost of activity, etc. Annexes A to G contain: classification of metabolic rate for kinds of activities, classification of metabolic rate by occupation, data for standard person, metabolic rate for body posture, type of work and body motion related to work speed, metabolic rat Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8996:2004 - **Identifier:** ISO 8996:2004 _(verified: appears in the quote below)_ - **Item title:** Ergonomics of the thermal environment — Determination of metabolic rate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8996:2021 - **Withdrawn / published date:** 2004-09-22 _(verified: appears in the quote below)_ > 34251,IS,,ISO 8996:2004,Ergonomics of the thermal environment — Determination of metabolic rate,Ergonomie de l'environnement thermique — Détermination du métabolisme énergétique,2004-09-22,2,['13.180'],ISO/TC 159/SC 5,9599,[16525],[74443],"['en','fr']",24,"
The metabolic rate, as a conversion of chemical into mechanical and thermal energy, measures the energetic cost of muscular load and gives a numerical index of activity. Metabolic rate is an important determinant of the comfort or the strain resulting from exposure to a thermal environment. In particular, in hot climates, the high levels of metabolic heat production associated with muscular work aggravate heat stress, as large amounts o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8999:1993 - **Identifier:** ISO 8999:1993 _(verified: appears in the quote below)_ - **Item title:** Reciprocating internal combustion engines — Graphical symbols _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8999:2001 - **Withdrawn / published date:** 1993-05-20 _(verified: appears in the quote below)_ > 16528,IS,,ISO 8999:1993,Reciprocating internal combustion engines — Graphical symbols,Moteurs alternatifs à combustion interne — Symboles graphiques,1993-05-20,1,"['27.020','01.080.20']",ISO/TC 70,9599,,[30758],"['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9:1986 - **Identifier:** ISO 9:1986 _(verified: appears in the quote below)_ - **Item title:** Documentation — Transliteration of Slavic Cyrillic characters into Latin characters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9:1995 - **Withdrawn / published date:** 1986-09-04 _(verified: appears in the quote below)_ > 3588,IS,,ISO 9:1986,Documentation — Transliteration of Slavic Cyrillic characters into Latin characters,Documentation — Translittération des caractères cyrilliques slaves en caractères latins,1986-09-04,1,['01.140.10'],ISO/TC 46,9599,[3587],[3589],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 90-1:1986 - **Identifier:** ISO 90-1:1986 _(verified: appears in the quote below)_ - **Item title:** Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 1: Open-top cans _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 90-1:1997 - **Withdrawn / published date:** 1986-11-27 _(verified: appears in the quote below)_ > 3741,IS,,ISO 90-1:1986,Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 1: Open-top cans,Récipients métalliques légers — Définitions et méthodes de détermination des dimensions et des capacités — Partie 1: Boîtes serties,1986-11-27,1,['55.120'],ISO/TC 52,9599,[3740],[23336],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 90:1977 - **Identifier:** ISO 90:1977 _(verified: appears in the quote below)_ - **Item title:** Hermetically sealed metal cans for food and drinks — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 90-3:1986 | ISO 90-1:1986 | ISO 90-2:1986 - **Withdrawn / published date:** 1977-06-01 _(verified: appears in the quote below)_ > 3740,IS,,ISO 90:1977,Hermetically sealed metal cans for food and drinks — Specifications,Récipients métalliques étanches pour denrées alimentaires et boissons — Spécifications,1977-06-01,1,['55.120'],ISO/TC 52,9599,,"[3744,3741,3742]","['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 90-2:1986 - **Identifier:** ISO 90-2:1986 _(verified: appears in the quote below)_ - **Item title:** Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 2: General use containers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 90-2:1997 - **Withdrawn / published date:** 1986-12-04 _(verified: appears in the quote below)_ > 3742,IS,,ISO 90-2:1986,Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 2: General use containers,Récipients métalliques légers — Définitions et méthodes de détermination des dimensions et des capacités — Partie 2: Récipients à usage général,1986-12-04,1,['55.120'],ISO/TC 52,9599,[3740],[3743],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 90-3:1986 - **Identifier:** ISO 90-3:1986 _(verified: appears in the quote below)_ - **Item title:** Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 90-3:2000 - **Withdrawn / published date:** 1986-12-04 _(verified: appears in the quote below)_ > 3744,IS,,ISO 90-3:1986,Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans,Récipients métalliques légers — Définitions et méthodes de détermination des dimensions et des capacités — Partie 3: Boîtiers pour aérosols,1986-12-04,1,['55.130'],ISO/TC 52,9599,[3740],[25360],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 90-3:1986/Amd 1:1994 - **Identifier:** ISO 90-3:1986/Amd 1:1994 _(verified: appears in the quote below)_ - **Item title:** Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans — Amendment 1: Dimensions of the top end of three-piece necked-in tinplate cans _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 90-3:2000 - **Withdrawn / published date:** 1994-09-08 _(verified: appears in the quote below)_ > 3745,IS,Amd,ISO 90-3:1986/Amd 1:1994,Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans — Amendment 1: Dimensions of the top end of three-piece necked-in tinplate cans,"Récipients métalliques légers — Définitions et méthodes de détermination des dimensions et des capacités — Partie 3: Boîtiers pour aérosols — Amendement 1: Dimensions de la partie supérieure des boîtiers en acier, trois pièces, à rétreints",1994-09-08,1,['55.130'],ISO/TC 52,9599,,[25360],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9000-1:1994 - **Identifier:** ISO 9000-1:1994 _(verified: appears in the quote below)_ - **Item title:** Quality management and quality assurance standards — Part 1: Guidelines for selection and use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 9000-1 - **Withdrawn / published date:** 1994-06-30 _(verified: appears in the quote below)_ > 16530,IS,,ISO 9000-1:1994,Quality management and quality assurance standards — Part 1: Guidelines for selection and use,Normes pour le management de la qualité et l'assurance de la qualité — Partie 1: Lignes directrices pour leur sélection et utilisation,1994-06-30,1,"['03.120.10','03.100.70']",ISO/TC 176/SC 2,9599,[16529],[21821],"['en','fr']",18, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9000:1987 - **Identifier:** ISO 9000:1987 _(verified: appears in the quote below)_ - **Item title:** Quality management and quality assurance standards — Guidelines for selection and use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9000-1:1994 - **Withdrawn / published date:** 1987-03-19 _(verified: appears in the quote below)_ > 16529,IS,,ISO 9000:1987,Quality management and quality assurance standards — Guidelines for selection and use,Normes pour la gestion de la qualité et l'assurance de la qualité — Lignes directrices pour la sélection et l'utilisation,1987-03-19,1,"['03.120.10','03.100.70']",ISO/TC 176/SC 2,9599,,[16530],['en'],6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9000-2:1993 - **Identifier:** ISO 9000-2:1993 _(verified: appears in the quote below)_ - **Item title:** Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9000-2:1997 - **Withdrawn / published date:** 1993-06-03 _(verified: appears in the quote below)_ > 16531,IS,,ISO 9000-2:1993,"Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003","Normes pour le management de la qualité et l'assurance de la qualité — Partie 2: Lignes directrices pour l'application de l'ISO 9001, l'ISO 9002 et l'ISO 9003",1993-06-03,1,"['03.120.10','03.100.70']",ISO/TC 176/SC 2,9599,,[26363],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9000:2000 - **Identifier:** ISO 9000:2000 _(verified: appears in the quote below)_ - **Item title:** Quality management systems — Fundamentals and vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 9000 | ISO 9000:2005 - **Withdrawn / published date:** 2000-12-08 _(verified: appears in the quote below)_ > 29280,IS,,ISO 9000:2000,Quality management systems — Fundamentals and vocabulary,Systèmes de management de la qualité — Principes essentiels et vocabulaire,2000-12-08,2,"['03.120.10','03.100.70','01.040.03']",ISO/TC 176/SC 1,9599,[20115],"[40505,42180]","['ar','en','es','fr','ru']",29,"
This International Standard describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms.
This International Standard is applicable to the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9000:2005 - **Identifier:** ISO 9000:2005 _(verified: appears in the quote below)_ - **Item title:** Quality management systems — Fundamentals and vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9000:2015 - **Withdrawn / published date:** 2005-09-20 _(verified: appears in the quote below)_ > 42180,IS,,ISO 9000:2005,Quality management systems — Fundamentals and vocabulary,Systèmes de management de la qualité — Principes essentiels et vocabulaire,2005-09-20,3,"['03.120.10','03.100.70','01.040.03']",ISO/TC 176/SC 1,9599,"[40906,29280]",[45481],"['ar','en','es','fr','ru']",30,"
ISO 9000:2005 describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms.
It is applicable to the following:
a) organizations seek Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 9000:2015 - **Identifier:** ISO 9000:2015 _(verified: appears in the quote below)_ - **Item title:** Quality management systems — Fundamentals and vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9000:2026 - **Withdrawn / published date:** 2015-09-22 _(verified: appears in the quote below)_ > 45481,IS,,ISO 9000:2015,Quality management systems — Fundamentals and vocabulary,Systèmes de management de la qualité — Principes essentiels et vocabulaire,2015-09-22,4,"['03.120.10','01.040.03']",ISO/TC 176/SC 1,9599,[42180],[88465],"['en','es','fr','ru']",51,"
ISO 9000:2015 describes the fundamental concepts and principles of quality management which are universally applicable to the following:
ISO 9001:2000 specifies requirements for a quality management system where an organization
ISO 9001:2008 specifies requirements for a quality management system where an organization
This International Standard provides guidelines beyond the requirements given in ISO 9001 in order to consider both the effectiveness and efficiency of a quality management system, and consequently the potential for improvement of the performance of an organization. When compared to ISO 9001, the objectives of customer satisfaction and product quality are extended to include the satisfaction of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 178](https://referencesource.org/iso-standard-supersessions/p/178/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 180](https://referencesource.org/iso-standard-supersessions/p/180/) Last verified: 2026-08-05. Review by: 2027-02-02.