The publication is intended to check the effectiveniss of cleaning and disinfection methods. It deals with visual inspection, sampling from plant surfaces, re-usable product containers, air, sampling of water and aqueous solutions other than those added to the product, and sampling of raw materials and products.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8087:1985 - **Identifier:** ISO 8087:1985 _(verified: appears in the quote below)_ - **Item title:** Mobile cranes — Drum and sheave sizes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16625:2013 | ISO/PWI 8087 - **Withdrawn / published date:** 1985-07-25 _(verified: appears in the quote below)_ > 15123,IS,,ISO 8087:1985,Mobile cranes — Drum and sheave sizes,Grues mobiles — Dimensions des tambours et poulies,1985-07-25,1,['53.020.20'],ISO/TC 96/SC 6,9599,,"[57301,45926]","['en','fr']",1,Establishes the minimum ratio of the pitch diameters of the drum and sheave to the nominal diameter of the rope for hoisting and luffing operations. Applies to all basic types of self-propelled mobile cranes as defined in ISO 4306-1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8090:1990 - **Identifier:** ISO 8090:1990 _(verified: appears in the quote below)_ - **Item title:** Cycles — Terminology _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8090:2019 - **Withdrawn / published date:** 1990-02-22 _(verified: appears in the quote below)_ > 15126,IS,,ISO 8090:1990,Cycles — Terminology,Cycles — Terminologie,1990-02-22,1,"['43.150','01.040.43']",ISO/TC 149/SC 1,9599,,[70618],"['en','fr']",29,Defines the terminology of bicycles in English and French. It also specifies the symbols to designate bicycle main dimensions.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8092-1:1989 - **Identifier:** ISO 8092-1:1989 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Flat, quick-connect terminations — Part 1: Tabs for single pole connections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8092-1:1996 - **Withdrawn / published date:** 1989-06-15 _(verified: appears in the quote below)_ > 15128,IS,,ISO 8092-1:1989,"Road vehicles — Flat, quick-connect terminations — Part 1: Tabs for single pole connections",Véhicules routiers — Connexions rapides à languette plate — Partie 1: Languettes pour raccordements unipolaires,1989-06-15,1,['43.040.10'],ISO/TC 22,9599,,[20306],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8092-2:1988 - **Identifier:** ISO 8092-2:1988 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Flat, quick-connect terminations — Part 2: Tests and performance requirements for single pole connections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8092-2:1996 - **Withdrawn / published date:** 1988-11-17 _(verified: appears in the quote below)_ > 15129,IS,,ISO 8092-2:1988,"Road vehicles — Flat, quick-connect terminations — Part 2: Tests and performance requirements for single pole connections",Véhicules routiers — Connexions rapides à languette plate — Partie 2: Essais et exigences de performance des connexions pour raccordements unipolaires,1988-11-17,1,['43.040.10'],ISO/TC 22,9599,,[1504],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8092-2:1996 - **Identifier:** ISO 8092-2:1996 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8092-2:2000 - **Withdrawn / published date:** 1996-02-08 _(verified: appears in the quote below)_ > 1504,IS,,ISO 8092-2:1996,"Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements","Véhicules routiers — Connexions pour faisceaux de câblage électrique embarqués — Partie 2: Définitions, méthodes d'essai et exigences générales",1996-02-08,2,['43.040.10'],ISO/TC 22,9599,[15129],[27517],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8092-2:2000 - **Identifier:** ISO 8092-2:2000 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8092-2:2005 - **Withdrawn / published date:** 2000-11-30 _(verified: appears in the quote below)_ > 27517,IS,,ISO 8092-2:2000,"Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements","Véhicules routiers — Connexions pour faisceaux de câblage électrique embarqués — Partie 2: Définitions, méthodes d'essai et exigences générales",2000-11-30,3,['43.040.10'],ISO/TC 22,9599,[1504],[39549],"['en','fr']",30, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8092-2:2005 - **Identifier:** ISO 8092-2:2005 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8092-2:2023 - **Withdrawn / published date:** 2005-11-18 _(verified: appears in the quote below)_ > 39549,IS,,ISO 8092-2:2005,"Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements","Véhicules routiers — Connexions pour faisceaux de câblage électrique embarqués — Partie 2: Définitions, méthodes d'essai et exigences de performances générales",2005-11-18,4,['43.040.10'],ISO/TC 22/SC 32,9599,[27517],[78901],"['en','fr']",29,"ISO 8092:2005 defines terms and specifies test methods and general performance requirements for single-pole and multi-pole connections used with on-board electrical wiring harnesses of road vehicles.
It is applicable to connectors designed to be disconnected after mounting in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8094:1984 - **Identifier:** ISO 8094:1984 _(verified: appears in the quote below)_ - **Item title:** Steel cord conveyor belts — Adhesion strength test of the cover to the core layer _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 8094 | ISO 8094:2013 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 15132,IS,,ISO 8094:1984,Steel cord conveyor belts — Adhesion strength test of the cover to the core layer,Courroies transporteuses à câbles d'acier — Essai d'adhérence du revêtement à la couche de câbles,1984-12-01,1,['53.040.20'],ISO/TC 41/SC 3,9599,,"[15133,61038]","['en','fr']",2,"
Specifies a test method for determing the adhesion strength of the cover to the core lyer. Applies exclusivily to steel cord conveyor belts. Describes the principle, the apparatus, the specimens, the procedure, and the expression of results; shows how to set up the test report. Some figures illustrate arrangements and reference quantities of concern.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8096-1:1989 - **Identifier:** ISO 8096-1:1989 _(verified: appears in the quote below)_ - **Item title:** Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8096:2005 - **Withdrawn / published date:** 1989-06-22 _(verified: appears in the quote below)_ > 15135,IS,,ISO 8096-1:1989,Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics,Supports textiles revêtus de caoutchouc ou de plastique pour vêtements imperméables à l'eau — Spécifications — Partie 1: Tissus revêtus de poly(chlorure de vinyle),1989-06-22,1,['59.080.40'],ISO/TC 45/SC 4,9599,,[35281],"['en','fr']",6,"This part of ISO 8096 specifies requirements for fabrics coated on one or both sides with suitably plasticized coating, pigmented or otherwise provided with additions of vinyl chloride or copolymer the major constituent of which is vinyl chloride, and which are suitable for use in the making up of water-resistant clothing.< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8096-1:1989/Cor 1:1991 - **Identifier:** ISO 8096-1:1989/Cor 1:1991 _(verified: appears in the quote below)_ - **Item title:** Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8096:2005 - **Withdrawn / published date:** 1991-08-01 _(verified: appears in the quote below)_ > 15136,IS,Cor,ISO 8096-1:1989/Cor 1:1991,Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics — Technical Corrigendum 1,Supports textiles revêtus de caoutchouc ou de plastique pour vêtements imperméables à l'eau — Spécifications — Partie 1: Tissus revêtus de poly(chlorure de vinyle) — Rectificatif technique 1,1991-08-01,1,['59.080.40'],ISO/TC 45/SC 4,9599,,[35281],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8096-2:1989 - **Identifier:** ISO 8096-2:1989 _(verified: appears in the quote below)_ - **Item title:** Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 2: Polyurethane- and silicone elastomer-coated fabrics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8096:2005 - **Withdrawn / published date:** 1989-07-01 _(verified: appears in the quote below)_ > 15137,IS,,ISO 8096-2:1989,Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 2: Polyurethane- and silicone elastomer-coated fabrics,Supports textiles revêtus de caoutchouc ou de plastique pour vêtements imperméables à l'eau — Spécifications — Partie 2: Tissus revêtus de polyuréthanne ou d'élastomère silicone,1989-07-01,1,['59.080.40'],ISO/TC 45/SC 4,9599,,[35281],"['en','fr']",13,
This part of ISO 8096 specifies requirements for fabrics coated on one side with a polyurethane or silicone elastomer or a coating the major constituent of which is a polyurethane or silicone elastomer and intended for use in water-resistant clothing.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8096-3:1988 - **Identifier:** ISO 8096-3:1988 _(verified: appears in the quote below)_ - **Item title:** Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 3: Natural rubber- and synthetic rubber-coated fabrics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8096:2005 - **Withdrawn / published date:** 1988-05-01 _(verified: appears in the quote below)_ > 15138,IS,,ISO 8096-3:1988,Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 3: Natural rubber- and synthetic rubber-coated fabrics,Supports textiles revêtus de caoutchouc ou de plastique pour vêtements imperméables à l'eau — Spécifications — Partie 3: Tissus revêtus de caoutchouc naturel ou de caoutchouc synthétique,1988-05-01,1,['59.080.40'],ISO/TC 45/SC 4,9599,,[35281],"['en','fr']",17,This part of ISO 8096 specifies requirements for fabrics coated in one or both sides or for double-texture fabrics in which a natural rubber or synthetic polymer of a type other than those specified in ISO 8096-1 and ISO 8096-2 is used and which are primarily intended Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8097:1986 - **Identifier:** ISO 8097:1986 _(verified: appears in the quote below)_ - **Item title:** Aircraft — Minimum airworthiness requirements and test conditions for certified air cargo unit load devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8097:1995 | ISO 8097:1993 - **Withdrawn / published date:** 1986-10-16 _(verified: appears in the quote below)_ > 15139,IS,,ISO 8097:1986,Aircraft — Minimum airworthiness requirements and test conditions for certified air cargo unit load devices,Aéronefs — Caractéristiques minimales de navigabilité et conditions d'essai des unités de charge certifiées pour fret aérien,1986-10-16,1,['55.180.30'],ISO/TC 20/SC 9,9599,,"[22499,15140]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8097:1993 - **Identifier:** ISO 8097:1993 _(verified: appears in the quote below)_ - **Item title:** Aircraft — Minimum airworthiness requirements and test conditions for certified air cargo unit load devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8097:1995 - **Withdrawn / published date:** 1993-08-26 _(verified: appears in the quote below)_ > 15140,IS,,ISO 8097:1993,Aircraft — Minimum airworthiness requirements and test conditions for certified air cargo unit load devices,Aéronefs — Caractéristiques minimales de navigabilité et conditions d'essai des unités de charge certifiées pour fret aérien,1993-08-26,2,['55.180.30'],ISO/TC 20/SC 9,9599,[15139],[22499],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8097:1995 - **Identifier:** ISO 8097:1995 _(verified: appears in the quote below)_ - **Item title:** Aircraft — Minimum airworthiness requirements and test conditions for certified air cargo unit load devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8097:2001 - **Withdrawn / published date:** 1995-08-17 _(verified: appears in the quote below)_ > 22499,IS,,ISO 8097:1995,Aircraft — Minimum airworthiness requirements and test conditions for certified air cargo unit load devices,Aéronefs — Caractéristiques minimales de navigabilité et conditions d'essai des unités de charge certifiées pour fret aérien,1995-08-17,3,['55.180.30'],ISO/TC 20/SC 9,9599,"[15139,15140]",[32356],"['en','fr']",2,"
Lays down the minimum requirements and test conditions for certified cargo unit load devices in certified aircraft. Covers pallets, nets and containers for the class I and class II of aircraft loading and restraint systems.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8098:1989 - **Identifier:** ISO 8098:1989 _(verified: appears in the quote below)_ - **Item title:** Cycles — Safety requirements for bicycles for young children _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8098:2002 - **Withdrawn / published date:** 1989-09-07 _(verified: appears in the quote below)_ > 15141,IS,,ISO 8098:1989,Cycles — Safety requirements for bicycles for young children,Cycles — Conditions de sécurité des bicyclettes pour jeunes enfants,1989-09-07,1,"['43.150','97.190']",ISO/TC 149/SC 1,9599,,[25653],"['en','fr']",14,"Specifies for bicycles for young children safety and performance requirements concerning design, assembly and testing of bicycles and bicycles components. Gives guides for their use and maintenance. Applies to bicycles having a saddle height between 435 mm and 635 mm maximum, and a transmitted drive to the rear wheel. Applies to the specified bicycles whether having supporting wheels or not.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8098:1989/Amd 1:1992 - **Identifier:** ISO 8098:1989/Amd 1:1992 _(verified: appears in the quote below)_ - **Item title:** Cycles — Safety requirements for bicycles for young children — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8098:2002 - **Withdrawn / published date:** 1992-12-03 _(verified: appears in the quote below)_ > 15142,IS,Amd,ISO 8098:1989/Amd 1:1992,Cycles — Safety requirements for bicycles for young children — Amendment 1,Cycles — Conditions de sécurité des bicyclettes pour jeunes enfants — Amendement 1,1992-12-03,1,"['43.150','97.190']",ISO/TC 149/SC 1,9599,,[25653],"['en','fr']",2,"Replaces subclause 2.2.1.1, amends subclause 2.3.1, and adds new subclauses 2.6.4 (Wheel retention) and 2.6.5 (Quick-release axle mechanisms).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8098:2002 - **Identifier:** ISO 8098:2002 _(verified: appears in the quote below)_ - **Item title:** Cycles — Safety requirements for bicycles for young children _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8098:2014 - **Withdrawn / published date:** 2002-08-08 _(verified: appears in the quote below)_ > 25653,IS,,ISO 8098:2002,Cycles — Safety requirements for bicycles for young children,Cycles — Exigences de sécurité relatives aux bicyclettes pour jeunes enfants,2002-08-08,2,"['43.150','97.190']",ISO/TC 149/SC 1,9599,"[15141,15142]",[54815],"['en','fr']",27,"This International Standard specifies safety and performance requirements and test methods for the design, assembly and testing of bicycles for young children of from about four to eight years of age and these bicycles' sub-assemblies. It also provides guidelines for instructions on the use and care of the bicycles.
This International Standard is applicable to bicycles with a maximum saddle height of more than 435 mm and less t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8098:2014 - **Identifier:** ISO 8098:2014 _(verified: appears in the quote below)_ - **Item title:** Cycles — Safety requirements for bicycles for young children _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8098:2023 - **Withdrawn / published date:** 2014-06-05 _(verified: appears in the quote below)_ > 54815,IS,,ISO 8098:2014,Cycles — Safety requirements for bicycles for young children,Cycles — Exigences de sécurité relatives aux bicyclettes pour jeunes enfants,2014-06-05,3,"['43.150','97.190']",ISO/TC 149/SC 1,9599,[25653],[78085],"['en','fr']",43,"
ISO 8098:2014 specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. It also provides guidelines for instructions on the use and care of the bicycles.
ISO 8098:2014 is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm, propelled by a transmitted drive to the rear wheel.
ISO 809 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8099:1985 - **Identifier:** ISO 8099:1985 _(verified: appears in the quote below)_ - **Item title:** Small craft — Toilet retention and recirculating systems for the treatment of toilet waste _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8099:2000 - **Withdrawn / published date:** 1985-12-19 _(verified: appears in the quote below)_ > 15143,IS,,ISO 8099:1985,Small craft — Toilet retention and recirculating systems for the treatment of toilet waste,Navires de plaisance — Systèmes de rétention et de traitement des déchets des installations sanitaires (toilettes),1985-12-19,1,"['13.030.40','47.080']",ISO/TC 188,9599,,[33458],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8099:2000 - **Identifier:** ISO 8099:2000 _(verified: appears in the quote below)_ - **Item title:** Small craft — Toilet waste retention systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 8099 | ISO 8099-1:2018 - **Withdrawn / published date:** 2000-12-21 _(verified: appears in the quote below)_ > 33458,IS,,ISO 8099:2000,Small craft — Toilet waste retention systems,Petits navires — Systèmes de rétention des déchets des installations sanitaires (toilettes),2000-12-21,2,['47.080'],ISO/TC 188,9599,[15143],"[69541,73216]","['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8100-1:2019 - **Identifier:** ISO 8100-1:2019 _(verified: appears in the quote below)_ - **Item title:** Lifts for the transport of persons and goods — Part 1: Safety rules for the construction and installation of passenger and goods passenger lifts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8100-1:2026 - **Withdrawn / published date:** 2019-03-11 _(verified: appears in the quote below)_ > 70824,IS,,ISO 8100-1:2019,Lifts for the transport of persons and goods — Part 1: Safety rules for the construction and installation of passenger and goods passenger lifts,Elévateurs pour le transport de personnes et d'objets — Partie 1: Règles de sécurité pour la construction et l'installation d'ascenseurs et d'ascenseurs de charge,2019-03-11,1,['91.140.90'],ISO/TC 178,9599,,[80553],['en'],154,"
1.1 This document specifies the safety rules for permanently installed new passenger or goods passenger lifts, with traction, positive or hydraulic drive, serving defined landing levels, having a car designed for the transportation of persons or persons and goods, suspended by ropes, chains or j Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8100-2:2019 - **Identifier:** ISO 8100-2:2019 _(verified: appears in the quote below)_ - **Item title:** Lifts for the transport of persons and goods — Part 2: Design rules, calculations, examinations and tests of lift components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8100-2:2026 - **Withdrawn / published date:** 2019-03-11 _(verified: appears in the quote below)_ > 71217,IS,,ISO 8100-2:2019,"Lifts for the transport of persons and goods — Part 2: Design rules, calculations, examinations and tests of lift components","Elévateurs pour le transport de personnes et d'objets — Partie 2: Règles de conception, calculs, examens et essais des composants pour élévateurs",2019-03-11,1,['91.140.90'],ISO/TC 178,9599,,[80554],['en'],97,"
This document specifies the design rules, calculations, examinations and tests of lift components which are referred to by other standards used for the design of passenger lifts, goods passenger lifts, goods only lifts, and other similar types of lifting appliances.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8106:1985 - **Identifier:** ISO 8106:1985 _(verified: appears in the quote below)_ - **Item title:** Glass containers — Determination of capacity by gravimetric method — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8106:2004 - **Withdrawn / published date:** 1985-07-25 _(verified: appears in the quote below)_ > 15153,IS,,ISO 8106:1985,Glass containers — Determination of capacity by gravimetric method — Test method,Récipients en verre — Détermination de la capacité par la méthode gravimétrique — Méthode d'essai,1985-07-25,1,['55.100'],ISO/TC 63,9599,,[35616],"['en','fr']",2,"The brimfull and filling capacity is calculated from the mass of the water filling the container, adjusted ba a factor for temperature and density of the water. Apparatus and procedure are described including measurement accuracy and volume correction factors.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 81060-2:2009 - **Identifier:** ISO 81060-2:2009 _(verified: appears in the quote below)_ - **Item title:** Non-invasive sphygmomanometers — Part 2: Clinical validation of automated measurement type _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 81060-2:2013 - **Withdrawn / published date:** 2009-04-29 _(verified: appears in the quote below)_ > 50814,IS,,ISO 81060-2:2009,Non-invasive sphygmomanometers — Part 2: Clinical validation of automated measurement type,Sphygmomanomètres non invasifs — Partie 2: Validation clinique pour type à mesurage automatique,2009-04-29,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[57977],"['en','fr','ru']",35,"ISO 81060-2:2009 is applicable to all sphygmomanometers that sense or display pulsations, flow or sounds for the estimation, display or recording of blood pressure. These sphygmomanometers need not have automatic cuff inflation. ISO 81060-2:2009 covers sphygmomanometers intended for use in all patient populations (e.g. all age and weight ranges), and all conditions of use (e.g. ambulatory blood press Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 81060-2:2009/Cor 1:2011 - **Identifier:** ISO 81060-2:2009/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Non-invasive sphygmomanometers — Part 2: Clinical validation of automated measurement type — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 81060-2:2013 - **Withdrawn / published date:** 2011-02-11 _(verified: appears in the quote below)_ > 57997,IS,Cor,ISO 81060-2:2009/Cor 1:2011,Non-invasive sphygmomanometers — Part 2: Clinical validation of automated measurement type — Technical Corrigendum 1,Sphygmomanomètres non invasifs — Partie 2: Validation clinique pour type à mesurage automatique — Rectificatif technique 1,2011-02-11,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[57977],"['en','ru']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 81060-2:2013 - **Identifier:** ISO 81060-2:2013 _(verified: appears in the quote below)_ - **Item title:** Non-invasive sphygmomanometers — Part 2: Clinical investigation of automated measurement type _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 81060-2:2018 - **Withdrawn / published date:** 2013-04-18 _(verified: appears in the quote below)_ > 57977,IS,,ISO 81060-2:2013,Non-invasive sphygmomanometers — Part 2: Clinical investigation of automated measurement type,Sphygmomanomètres non invasifs — Partie 2: Validation clinique pour type à mesurage automatique,2013-04-18,2,['11.040.10'],ISO/TC 121/SC 3,9599,"[57997,50814]",[73339],"['en','fr','ru']",41,"
ISO 81060-2:2013 specifies the requirements and methods for the clinical investigation of me equipment used for the intermittent non-invasive automated estimation of the arterial blood pressure by utilizing a cuff.
ISO 81060-2:2013 is applicable to all sphygmomanometers that sense or display pulsations, flow or sounds for the estimation, display or recording of blood pressure. Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8109:1985 - **Identifier:** ISO 8109:1985 _(verified: appears in the quote below)_ - **Item title:** Securities — Format of Eurobonds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8109:1990 - **Withdrawn / published date:** 1985-07-11 _(verified: appears in the quote below)_ > 15156,IS,,ISO 8109:1985,Securities — Format of Eurobonds,Valeurs mobilières — Format des Eurobonds,1985-07-11,1,['03.060'],ISO/TC 68,9599,,[15157],"['en','fr']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8109:1990 - **Identifier:** ISO 8109:1990 _(verified: appears in the quote below)_ - **Item title:** Banking and related financial services — Securities — Format of Eurobonds _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 8109 - **Withdrawn / published date:** 1990-11-29 _(verified: appears in the quote below)_ > 15157,IS,,ISO 8109:1990,Banking and related financial services — Securities — Format of Eurobonds,Banque et services financiers liés aux opérations bancaires — Valeurs mobilières — Format des Eurobonds,1990-11-29,2,['03.060'],ISO/TC 68/SC 8,9599,[15156],[29003],"['en','fr']",8,"
Specifies the format characteristics of Eurobonds, for example, physical representation with regard to size, paper, printing, layout and contents. This second edition cancels and replaces the first edition (1985).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 811:1981 - **Identifier:** ISO 811:1981 _(verified: appears in the quote below)_ - **Item title:** Textile fabrics — Determination of resistance to water penetration — Hydrostatic pressure test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 811:2018 - **Withdrawn / published date:** 1981-09-01 _(verified: appears in the quote below)_ > 5156,IS,,ISO 811:1981,Textile fabrics — Determination of resistance to water penetration — Hydrostatic pressure test,Étoffes — Détermination de la résistance à la pénétration de l'eau — Essai sous pression hydrostatique,1981-09-01,1,['59.080.30'],ISO/TC 38/SC 2,9599,,[65149],"['en','fr']",3,"A specimen is subjected to a steadily increasing pressure of water on one face, under standard conditions, until penetration occurs in three places. The water pressure may be applied from below or from above the test specimen. The hydrostatic head supported by a fabric is a measure of the resistance to the passage of water through the fabric.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8110-1:1988 - **Identifier:** ISO 8110-1:1988 _(verified: appears in the quote below)_ - **Item title:** Single cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11950:1995 - **Withdrawn / published date:** 1988-09-22 _(verified: appears in the quote below)_ > 15158,IS,,ISO 8110-1:1988,Single cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets,Fer chromé électrolytique simple réduction à froid — Partie 1: Feuilles,1988-09-22,1,['77.140.50'],ISO/TC 17,9599,,[20549],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8111-1:1988 - **Identifier:** ISO 8111-1:1988 _(verified: appears in the quote below)_ - **Item title:** Double cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11950:1995 - **Withdrawn / published date:** 1988-10-27 _(verified: appears in the quote below)_ > 15160,IS,,ISO 8111-1:1988,Double cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets,Fer chromé électrolytique double réduction à froid — Partie 1: Feuilles,1988-10-27,1,['77.140.50'],ISO/TC 17,9599,,[20549],"['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8112:1984 - **Identifier:** ISO 8112:1984 _(verified: appears in the quote below)_ - **Item title:** Caprolactam for industrial use — Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) — Spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8112:2023 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 15162,IS,,ISO 8112:1984,"Caprolactam for industrial use — Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) — Spectrometric method","Caprolactame à usage industriel — Détermination de la coloration d'une solution aqueuse à 50 % de caprolactame, exprimée en unités Hazen (échelle platine-cobalt) — Méthode spectrométrique",1984-11-01,1,['71.080.30'],ISO/TC 61/SC 5,9599,,[83911],"['en','fr']",2,The absorbance of a 50 % aqueous caprolactam solution is spectrometrically measured at a wavelength of 390 nm and an optical path length of 50 mm. The result is expressed in Hazen units by multiplying the absorbance measured by a constant fac Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8113:1985 - **Identifier:** ISO 8113:1985 _(verified: appears in the quote below)_ - **Item title:** Glass containers — Resistance to vertical load — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8113:2004 - **Withdrawn / published date:** 1985-07-11 _(verified: appears in the quote below)_ > 15163,IS,,ISO 8113:1985,Glass containers — Resistance to vertical load — Test method,Récipients en verre — Résistance à la charge verticale — Méthode d'essai,1985-07-11,1,['55.100'],ISO/TC 63,9599,,[35617],"['en','fr']",2,
A method if inspection and determination of the resistance of glass containers to external force in the direction of the axis is specified. The pass tests are intended especially for containers the resistance of which is specified. The press with two horizontal flat steel pressure plates and the test method are specified.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8115:1986 - **Identifier:** ISO 8115:1986 _(verified: appears in the quote below)_ - **Item title:** Cotton bales — Dimensions and density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8115-1:2022 - **Withdrawn / published date:** 1986-11-06 _(verified: appears in the quote below)_ > 15165,IS,,ISO 8115:1986,Cotton bales — Dimensions and density,Balles de coton — Dimensions et masse volumique,1986-11-06,1,['59.060.10'],ISO/TC 72/SC 1,9599,,[78271],"['en','fr']",2,"Intended to reduce the innumerable dimensions of cotton bales. Standardization of the dimensions of bales of man-made fibres might be the subject of a future International Standard. Lays down the nominal overall dimensions and the bale density of banded cotton bales. Applicable to the shaping and forming, the transport and opening of the bales. Not applicable to wrapping, banding, and marking of bales.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8115-3:1995 - **Identifier:** ISO 8115-3:1995 _(verified: appears in the quote below)_ - **Item title:** Bales — Part 3: Bales of cotton — Packaging and labelling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 8115-3 | ISO 8115-3:2022 - **Withdrawn / published date:** 1995-10-12 _(verified: appears in the quote below)_ > 1231,IS,,ISO 8115-3:1995,Bales — Part 3: Bales of cotton — Packaging and labelling,Balles — Partie 3: Balles de coton — Emballage et étiquetage,1995-10-12,1,['59.060.10'],ISO/TC 72/SC 1,9599,,"[43397,78272]","['en','fr']",2,Describes details for packaging and labelling of cotton bales.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-1:1985 - **Identifier:** ISO 8116-1:1985 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 1: Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-1:1995 - **Withdrawn / published date:** 1985-04-25 _(verified: appears in the quote below)_ > 15167,IS,,ISO 8116-1:1985,Textile machinery and accessories — Beams for winding — Part 1: Vocabulary,Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 1: Vocabulaire,1985-04-25,1,"['59.120.20','01.040.59']",ISO/TC 72/SC 3,9599,,[21949],"['en','fr','ru']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-2:1985 - **Identifier:** ISO 8116-2:1985 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 2: Warper's beams — Terminology and main dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-2:1995 - **Withdrawn / published date:** 1985-11-14 _(verified: appears in the quote below)_ > 15168,IS,,ISO 8116-2:1985,Textile machinery and accessories — Beams for winding — Part 2: Warper's beams — Terminology and main dimensions,Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 2: Ensouples d'ourdissoirs — Terminologie et dimensions principales,1985-11-14,1,['59.120.20'],ISO/TC 72/SC 3,9599,[4522],[21950],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-2:1995 - **Identifier:** ISO 8116-2:1995 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 2: Warper's beams _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-2:2008 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 21950,IS,,ISO 8116-2:1995,Textile machinery and accessories — Beams for winding — Part 2: Warper's beams,Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 2: Ensouples d'ourdissoirs,1995-08-24,2,['59.120.20'],ISO/TC 72/SC 3,9599,[15168],[43665],"['en','fr']",6,"Defines the basic terms and lays down the main dimensions, the variations of form and position, the driving devices and the designation for warper's beams with and without shafts. Cancels and replaces the first edition, which has been technically revised.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-3:1986 - **Identifier:** ISO 8116-3:1986 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 3: Weaver's beams — Terminology and main dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-3:1995 - **Withdrawn / published date:** 1986-12-04 _(verified: appears in the quote below)_ > 15169,IS,,ISO 8116-3:1986,Textile machinery and accessories — Beams for winding — Part 3: Weaver's beams — Terminology and main dimensions,Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 3: Ensouples de tissage — Terminologie et dimensions principales,1986-12-04,1,['59.120.20'],ISO/TC 72/SC 3,9599,[11240],[1366],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-3:1995 - **Identifier:** ISO 8116-3:1995 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 3: Weaver's beams _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-3:2008 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 1366,IS,,ISO 8116-3:1995,Textile machinery and accessories — Beams for winding — Part 3: Weaver's beams,Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 3: Ensouples de tissage,1995-08-24,2,['59.120.20'],ISO/TC 72/SC 3,9599,"[15169,12425]",[43666],"['en','fr']",6,"Defines the basic terms and lays down the main dimensions and the variations in form and position for weaver's beams that are used for weaving preparation as well as weaving. Furthermore the main dimensions of the threads for weaver's beams are given. Cancels and replaces the first edition, which has been technically revised.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-4:1985 - **Identifier:** ISO 8116-4:1985 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 4: Quality classification of flanges for weaver's beams, warper's beams and sectional beams _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-4:1995 - **Withdrawn / published date:** 1985-11-14 _(verified: appears in the quote below)_ > 15170,IS,,ISO 8116-4:1985,"Textile machinery and accessories — Beams for winding — Part 4: Quality classification of flanges for weaver's beams, warper's beams and sectional beams","Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 4: Classes de qualité pour les joues d'ensouples de tissage, d'ourdissoirs et sectionnelles",1985-11-14,1,['59.120.20'],ISO/TC 72/SC 3,9599,,[21951],"['en','fr']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-4:1995 - **Identifier:** ISO 8116-4:1995 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 4: Quality classification of flanges for weaver's beams, warper's beams and sectional beams _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-4:2008 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 21951,IS,,ISO 8116-4:1995,"Textile machinery and accessories — Beams for winding — Part 4: Quality classification of flanges for weaver's beams, warper's beams and sectional beams","Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 4: Classes de qualité pour les joues d'ensouples de tissage, d'ourdissoirs et sectionnelles",1995-08-24,2,['59.120.20'],ISO/TC 72/SC 3,9599,[15170],[43667],"['en','fr']",6,"Explains the theoretical relationships and gives directives for practical use, allowing classification of beam flanges. The determination of the quality class of a beam flange is carried out by means of a force test. Cancels and replaces the first edition, which has bee Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-5:1988 - **Identifier:** ISO 8116-5:1988 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 5: Sectional beams for warp knitting machines — Terminology and main dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-5:1995 - **Withdrawn / published date:** 1988-05-05 _(verified: appears in the quote below)_ > 15171,IS,,ISO 8116-5:1988,Textile machinery and accessories — Beams for winding — Part 5: Sectional beams for warp knitting machines — Terminology and main dimensions,Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 5: Ensouples sectionnelles pour métiers à mailles jetées — Terminologie et dimensions principales,1988-05-05,1,['59.120.20'],ISO/TC 72/SC 3,9599,[5497],[21952],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-5:1995 - **Identifier:** ISO 8116-5:1995 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 5: Sectional beams for warp knitting machines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-5:2008 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 21952,IS,,ISO 8116-5:1995,Textile machinery and accessories — Beams for winding — Part 5: Sectional beams for warp knitting machines,Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 5: Ensouples sectionnelles pour métiers à mailles jetées,1995-08-24,2,['59.120.20'],ISO/TC 72/SC 3,9599,[15171],[41314],"['en','fr']",4,"
Defines the basic terms and designation for sectional beams for warp knitting machines and lays down the main dimensions as well as the maximum values of variation of form and position for the main elements of these beams. Cancels and replaces the first edition, which has been technically revised.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8116-6:1990 - **Identifier:** ISO 8116-6:1990 _(verified: appears in the quote below)_ - **Item title:** Textile machinery and accessories — Beams for winding — Part 6: Beams for ribbon weaving and ribbon knitting — Terminology and main dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8116-6:1995 - **Withdrawn / published date:** 1990-07-12 _(verified: appears in the quote below)_ > 15172,IS,,ISO 8116-6:1990,Textile machinery and accessories — Beams for winding — Part 6: Beams for ribbon weaving and ribbon knitting — Terminology and main dimensions,Matériel pour l'industrie textile — Ensouples pour enroulement — Partie 6: Ensouples pour rubans tissés et rubans tricotés — Terminologie et dimensions principales,1990-07-12,1,['59.120.20'],ISO/TC 72/SC 3,9599,,[21953],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8117:1986 - **Identifier:** ISO 8117:1986 _(verified: appears in the quote below)_ - **Item title:** Textile machinery — Knitting machines — Nominal diameters of circular machines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8117:2003 - **Withdrawn / published date:** 1986-03-20 _(verified: appears in the quote below)_ > 15174,IS,,ISO 8117:1986,Textile machinery — Knitting machines — Nominal diameters of circular machines,Matériel pour l'industrie textile — Machines à tricoter — Diamètres nominaux des machines à tricoter circulaires,1986-03-20,1,['59.120.40'],ISO/TC 72/SC 3,9599,,[32053],"['en','fr']",1,Specifies the nominal diameters of circular knitting machines and the numerical designations of size of the machines. Applies to small and large diameter circular knitting machines and to sinker machines. Does not apply to patterning machines.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8118:1986 - **Identifier:** ISO 8118:1986 _(verified: appears in the quote below)_ - **Item title:** Weaving machines — Temple cylinders _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8118-1:2006 | ISO 8118-2:2006 - **Withdrawn / published date:** 1986-11-20 _(verified: appears in the quote below)_ > 15175,IS,,ISO 8118:1986,Weaving machines — Temple cylinders,Machines à tisser — Cylindres de templets,1986-11-20,1,['59.120.30'],ISO/TC 72/SC 3,9599,,"[40293,40294]","['en','fr','ru']",5,Defines the basic terms and lays down the technical specifications of temple cylinders. Designates the parts of a temple cylinder by means of an illustration. The dimensions of rings are contained in a table. Specifies the designation of a temple cylinder.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 812:1991 - **Identifier:** ISO 812:1991 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized — Determination of low-temperature brittleness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 812:2006 - **Withdrawn / published date:** 1991-11-14 _(verified: appears in the quote below)_ > 5158,IS,,ISO 812:1991,"Rubber, vulcanized — Determination of low-temperature brittleness",Caoutchouc vulcanisé — Détermination de la fragilité à basse température,1991-11-14,1,['83.060'],ISO/TC 45/SC 2,9599,"[5159,5157]",[41347],"['en','fr']",6,"Describes the apparatus and materials, test pieces, the test procedure, and the contents of the test report. This first edition cancels and replaces ISO/R 812:1968. Annex A is for information only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 812:2006 - **Identifier:** ISO 812:2006 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 812:2011 - **Withdrawn / published date:** 2006-05-15 _(verified: appears in the quote below)_ > 41347,IS,,ISO 812:2006,"Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness",Caoutchouc vulcanisé ou thermoplastique — Détermination de la fragilité à basse température,2006-05-15,2,['83.060'],ISO/TC 45/SC 2,9599,[5158],[55607],"['en','fr']",11,"ISO 812:2006 specifies a method for determining the lowest temperature at which rubber materials do not exhibit brittle failure or the temperature at which half of the test pieces used in a test fail when impacted under specified conditions.
The temperatures thus determined do not necessarily relate to the lowest temperature at which the material can be used since the brittleness will be affected by the conditi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 812:2011 - **Identifier:** ISO 812:2011 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 812:2017 - **Withdrawn / published date:** 2011-11-01 _(verified: appears in the quote below)_ > 55607,IS,,ISO 812:2011,"Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness",Caoutchouc vulcanisé ou thermoplastique — Détermination de la fragilité à basse température,2011-11-01,3,['83.060'],ISO/TC 45/SC 2,9599,[41347],[72774],"['en','fr']",14,"
ISO 812:2011 specifies a method for determining the lowest temperature at which rubber materials do not exhibit brittle failure or the temperature at which half of the test pieces used in a test fail when impacted under specified conditions.
The temperatures thus determined do not necessarily relate to the lowest temperature at which the material can be used since the brittleness will be affected by the condit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8121:1986 - **Identifier:** ISO 8121:1986 _(verified: appears in the quote below)_ - **Item title:** Textile machinery — Knitting machines — Nameplate information _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8121:2007 - **Withdrawn / published date:** 1986-12-04 _(verified: appears in the quote below)_ > 15181,IS,,ISO 8121:1986,Textile machinery — Knitting machines — Nameplate information,Matériel pour l'industrie textile — Machines à tricoter — Caractéristiques des plaques d'identification,1986-12-04,1,['59.120.40'],ISO/TC 72/SC 3,9599,,[43437],"['en','fr']",2,
Specifies the minimum information that shall be provided by the nameplates on knitting machines and also how that information shall be presented. The annex is given for information puposes only (examples of completed nameplates).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8121:1986/Cor 1:1992 - **Identifier:** ISO 8121:1986/Cor 1:1992 _(verified: appears in the quote below)_ - **Item title:** Textile machinery — Knitting machines — Nameplate information — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8121:2007 - **Withdrawn / published date:** 1992-11-19 _(verified: appears in the quote below)_ > 21424,IS,Cor,ISO 8121:1986/Cor 1:1992,Textile machinery — Knitting machines — Nameplate information — Technical Corrigendum 1,Matériel pour l'industrie textile — Machines à tricoter — Caractéristiques des plaques d'identification — Rectificatif technique 1,1992-11-19,1,['59.120.40'],ISO/TC 72/SC 3,9599,,[43437],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8122:1988 - **Identifier:** ISO 8122:1988 _(verified: appears in the quote below)_ - **Item title:** Textile machinery — Knitting machines — Number of needles for circular knitting machines of large nominal diameter _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8122:2003 - **Withdrawn / published date:** 1988-03-24 _(verified: appears in the quote below)_ > 15182,IS,,ISO 8122:1988,Textile machinery — Knitting machines — Number of needles for circular knitting machines of large nominal diameter,Matériel pour l'industrie textile — Machines à tricoter — Nombre d'aiguilles pour les machines à tricoter circulaires de grand diamètre nominal,1988-03-24,1,['59.120.40'],ISO/TC 72/SC 3,9599,,[32052],"['en','fr']",2,"Specifies the usual number of needles for single face, double face and 'links-links' circular knitting machines of large nominal diameter in terms of the needle pitch or gauge E and the machine nominal diameter. May be used as a basis for the comparison of fabrics knitted on these machines.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2000 - **Identifier:** ISO 8124-1:2000 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2009 - **Withdrawn / published date:** 2000-03-23 _(verified: appears in the quote below)_ > 15185,IS,,ISO 8124-1:2000,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques,2000-03-23,1,['97.200.50'],ISO/TC 181,9599,,[51974],['en'],79, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2000/Amd 1:2007 - **Identifier:** ISO 8124-1:2000/Amd 1:2007 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2009 - **Withdrawn / published date:** 2007-05-31 _(verified: appears in the quote below)_ > 38537,IS,Amd,ISO 8124-1:2000/Amd 1:2007,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques — Amendement 1,2007-05-31,1,['97.200.50'],ISO/TC 181,9599,,[51974],['en'],16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2000/Amd 2:2007 - **Identifier:** ISO 8124-1:2000/Amd 2:2007 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2009 - **Withdrawn / published date:** 2007-05-31 _(verified: appears in the quote below)_ > 41594,IS,Amd,ISO 8124-1:2000/Amd 2:2007,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques — Amendement 2,2007-05-31,1,['97.200.50'],ISO/TC 181,9599,,[51974],['en'],10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2009 - **Identifier:** ISO 8124-1:2009 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2012 - **Withdrawn / published date:** 2009-03-11 _(verified: appears in the quote below)_ > 51974,IS,,ISO 8124-1:2009,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques,2009-03-11,2,['97.200.50'],ISO/TC 181,9599,"[38537,41594,15185]",[62327],['en'],98,"The requirements in ISO 8124-1:2009 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The re Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2009/Amd 1:2011 - **Identifier:** ISO 8124-1:2009/Amd 1:2011 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2012 - **Withdrawn / published date:** 2011-12-09 _(verified: appears in the quote below)_ > 53993,IS,Amd,ISO 8124-1:2009/Amd 1:2011,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques — Amendement 1,2011-12-09,2,['97.200.50'],ISO/TC 181,9599,,[62327],['en'],9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2009/Amd 2:2012 - **Identifier:** ISO 8124-1:2009/Amd 2:2012 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Magnets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2012 - **Withdrawn / published date:** 2012-03-09 _(verified: appears in the quote below)_ > 59245,IS,Amd,ISO 8124-1:2009/Amd 2:2012,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Magnets,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques — Amendement 2: Aimants,2012-03-09,2,['97.200.50'],ISO/TC 181,9599,,[62327],['en'],7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2012 - **Identifier:** ISO 8124-1:2012 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2014 - **Withdrawn / published date:** 2012-09-24 _(verified: appears in the quote below)_ > 62327,IS,,ISO 8124-1:2012,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques,2012-09-24,3,['97.200.50'],ISO/TC 181,9599,"[51974,59245,53993]",[66626],['en'],97,"
The requirements in ISO 8124-1:2012 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The re Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2014 - **Identifier:** ISO 8124-1:2014 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2018 - **Withdrawn / published date:** 2014-12-17 _(verified: appears in the quote below)_ > 66626,IS,,ISO 8124-1:2014,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques,2014-12-17,4,['97.200.50'],ISO/TC 181,9599,"[62833,62327,62832]",[74477],['en'],120,"
The requirements in ISO 8124-1:2014 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The r Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2018 - **Identifier:** ISO 8124-1:2018 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2022 - **Withdrawn / published date:** 2018-03-07 _(verified: appears in the quote below)_ > 74477,IS,,ISO 8124-1:2018,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques,2018-03-07,5,['97.200.50'],ISO/TC 181,9599,[66626],[80767],['en'],150,"
The requirements in ISO 8124-1:2018 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The requirements of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2018/Amd 1:2020 - **Identifier:** ISO 8124-1:2018/Amd 1:2020 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1: Flying toys _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2022 - **Withdrawn / published date:** 2020-06-17 _(verified: appears in the quote below)_ > 75574,IS,Amd,ISO 8124-1:2018/Amd 1:2020,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1: Flying toys,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques — Amendement 1: Jouets volants,2020-06-17,5,['97.200.50'],ISO/TC 181,9599,[72534],[80767],['en'],5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-1:2018/Amd 2:2020 - **Identifier:** ISO 8124-1:2018/Amd 2:2020 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Various _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-1:2022 - **Withdrawn / published date:** 2020-06-15 _(verified: appears in the quote below)_ > 75573,IS,Amd,ISO 8124-1:2018/Amd 2:2020,Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Various,Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques — Amendement 2: Divers,2020-06-15,5,['97.200.50'],ISO/TC 181,9599,[50724],[80767],['en'],9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-10:2019 - **Identifier:** ISO 8124-10:2019 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 10: Experimental sets for chemistry and related activities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-10:2023 - **Withdrawn / published date:** 2019-05-03 _(verified: appears in the quote below)_ > 72601,IS,,ISO 8124-10:2019,Safety of toys — Part 10: Experimental sets for chemistry and related activities,Sécurité des jouets — Partie 10: Coffrets d'expériences chimiques et activités connexes,2019-05-03,1,['97.200.50'],ISO/TC 181,9599,,[80057],['en'],24,"
This document specifies requirements for the maximum amount and, in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
— those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[1];
— substances and mixtures which in excess Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-2:1994 - **Identifier:** ISO 8124-2:1994 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 2: Flammability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-2:2007 - **Withdrawn / published date:** 1994-10-20 _(verified: appears in the quote below)_ > 15186,IS,,ISO 8124-2:1994,Safety of toys — Part 2: Flammability,Sécurité des jouets — Partie 2: Inflammabilité,1994-10-20,1,['97.200.50'],ISO/TC 181,9599,,[43470],"['en','fr']",5,"
Specifies the categories of flammable materials which are prohibited in all toys and requirements concerning flammability of certain toys when they are submitted to a small source of ignition. Includes general requirements relating to all toys and specific requirements and methods of test relating to following toys which are considered as being those presenting the greatest hazard: beards, moustaches, wigs, masks and other products worn on the head with pile, hair or other attached material; disguise costumes in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-2:2007 - **Identifier:** ISO 8124-2:2007 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 2: Flammability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-2:2014 - **Withdrawn / published date:** 2007-06-07 _(verified: appears in the quote below)_ > 43470,IS,,ISO 8124-2:2007,Safety of toys — Part 2: Flammability,Sécurité des jouets — Partie 2: Inflammabilité,2007-06-07,2,['97.200.50'],ISO/TC 181,9599,[15186],[59695],['en'],15,"
ISO 8124-2:2007 specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition.
The test methods described are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-2:2014 - **Identifier:** ISO 8124-2:2014 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 2: Flammability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-2:2023 - **Withdrawn / published date:** 2014-08-19 _(verified: appears in the quote below)_ > 59695,IS,,ISO 8124-2:2014,Safety of toys — Part 2: Flammability,Sécurité des jouets — Partie 2: Inflammabilité,2014-08-19,3,['97.200.50'],ISO/TC 181,9599,[43470],[82012],['en'],20,"
ISO 8124-2:2014 specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition.
ISO 8124-2:2014 includes general requirements relating to all toys and specific requirements and test methods relating to the following toys, which are considered as being those presenting the greatest hazard:
? toys intended to be worn on the head: beards, moustaches, wigs, etc. made from ha Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-3:1997 - **Identifier:** ISO 8124-3:1997 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 3: Migration of certain elements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-3:2010 - **Withdrawn / published date:** 1997-04-03 _(verified: appears in the quote below)_ > 15187,IS,,ISO 8124-3:1997,Safety of toys — Part 3: Migration of certain elements,Sécurité des jouets — Partie 3: Migration de certains éléments,1997-04-03,1,['97.200.50'],ISO/TC 181,9599,,[43471],"['en','fr']",21, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-3:2010 - **Identifier:** ISO 8124-3:2010 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 3: Migration of certain elements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-3:2020 - **Withdrawn / published date:** 2010-03-18 _(verified: appears in the quote below)_ > 43471,IS,,ISO 8124-3:2010,Safety of toys — Part 3: Migration of certain elements,Sécurité des jouets — Partie 3: Migration de certains éléments,2010-03-18,2,['97.200.50'],ISO/TC 181,9599,[15187],[72600],"['en','ru']",21,"
ISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to analysis for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys.
Maximum acceptable levels are specified for the migration of the elements listed above from the following toy materials:
ISO 8124‑4:2010 specifies requirements and test methods for activity toys for domestic family use intended for children under fourteen years to play on or in.
Products covered by ISO 8124‑4:2010 include swings, slides, seesaws, carousels, rocking toys, climbing frames, fully enclosed toddler swing seats and other products intended to Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-4:2010/Amd 1:2012 - **Identifier:** ISO 8124-4:2010/Amd 1:2012 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 1: Inflatable activity toys _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-4:2014 | ISO/DIS 8124-4 - **Withdrawn / published date:** 2012-06-07 _(verified: appears in the quote below)_ > 54595,IS,Amd,ISO 8124-4:2010/Amd 1:2012,"Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 1: Inflatable activity toys","Sécurité des jouets — Partie 4: Balançoires, glissoires et jouets à activité similaire à usage domestique familial intérieur et extérieur — Amendement 1: Jouets à activité gonflables",2012-06-07,1,['97.200.50'],ISO/TC 181,9599,,"[66627,65285]",['en'],8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-4:2014 - **Identifier:** ISO 8124-4:2014 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-4:2025 - **Withdrawn / published date:** 2014-10-03 _(verified: appears in the quote below)_ > 66627,IS,,ISO 8124-4:2014,"Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use","Sécurité des jouets — Partie 4: Balançoires, glissoires et jouets à activité similaire à usage domestique familial intérieur et extérieur",2014-10-03,2,['97.200.50'],ISO/TC 181,9599,"[45949,54595,57963]",[79699],['en'],63,"
ISO 8124-4:2014 specifies requirements and test methods for activity toys for domestic family use intended for children under 14 years to play on or in.
Products covered by ISO 8124-4:2014 include swings, slides, seesaws, carousels, rocking toys, climbing frames, fully enclosed toddler swing seats and other products intended to Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-4:2014/Amd 1:2017 - **Identifier:** ISO 8124-4:2014/Amd 1:2017 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-4:2025 - **Withdrawn / published date:** 2017-07-14 _(verified: appears in the quote below)_ > 72537,IS,Amd,ISO 8124-4:2014/Amd 1:2017,"Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 1","Sécurité des jouets — Partie 4: Balançoires, glissoires et jouets à activité similaire à usage domestique familial intérieur et extérieur — Amendement 1",2017-07-14,2,['97.200.50'],ISO/TC 181,9599,,[79699],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-4:2014/Amd 2:2019 - **Identifier:** ISO 8124-4:2014/Amd 2:2019 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-4:2025 - **Withdrawn / published date:** 2019-03-04 _(verified: appears in the quote below)_ > 74255,IS,Amd,ISO 8124-4:2014/Amd 2:2019,"Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 2","Sécurité des jouets — Partie 4: Balançoires, glissoires et jouets à activité similaire à usage domestique familial intérieur et extérieur — Amendement 2",2019-03-04,2,['97.200.50'],ISO/TC 181,9599,,[79699],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-6:2014 - **Identifier:** ISO 8124-6:2014 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 6: Certain phthalate esters in toys and children's products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-6:2018 - **Withdrawn / published date:** 2014-08-08 _(verified: appears in the quote below)_ > 56844,IS,,ISO 8124-6:2014,Safety of toys — Part 6: Certain phthalate esters in toys and children's products,Sécurité des jouets — Partie 6: Jouets et produits pour enfants — Dosage de certains phtalates d'esters dans les jouets et produits pour enfants,2014-08-08,1,['97.200.50'],ISO/TC 181,9599,,[70008],['en'],27,"
ISO 8124-6:2014 specifies a method for the determination of di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-iso-nonyl phthalate (DINP), and di-iso-decyl phthalate (DIDP) (see Annex A) in toys and children's products.
ISO 8124-6:2014 is applicable to toys and ch Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8124-6:2018 - **Identifier:** ISO 8124-6:2018 _(verified: appears in the quote below)_ - **Item title:** Safety of toys — Part 6: Certain phthalate esters in toys and children's products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8124-6:2023 - **Withdrawn / published date:** 2018-11-07 _(verified: appears in the quote below)_ > 70008,IS,,ISO 8124-6:2018,Safety of toys — Part 6: Certain phthalate esters in toys and children's products,Sécurité des jouets — Partie 6: Dosage de certains esters de phtalates dans les jouets et produits pour enfants,2018-11-07,2,['97.200.50'],ISO/TC 181,9599,[56844],[79700],['en'],32,"
This document specifies a method for the determination of di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-iso-nonylphthalate (DINP) and di-iso-decyl phthalate (DIDP) (as specified in Annex A) in toys and children's products.
This document is applicable to toys and children's products which a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8126:1986 - **Identifier:** ISO 8126:1986 _(verified: appears in the quote below)_ - **Item title:** Micrographics — Diazo and vesicular films — Visual density — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8126:2000 - **Withdrawn / published date:** 1986-05-22 _(verified: appears in the quote below)_ > 15189,IS,,ISO 8126:1986,Micrographics — Diazo and vesicular films — Visual density — Specifications,Micrographie — Films diazoïques et vésiculaires — Densité visuelle — Spécifications,1986-05-22,1,['37.080'],ISO/TC 171/SC 1,9599,,[15190],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8126:2000 - **Identifier:** ISO 8126:2000 _(verified: appears in the quote below)_ - **Item title:** Micrographics — Duplicating film, silver, diazo and vesicular — Visual density — Specifications and measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8126:2019 - **Withdrawn / published date:** 2000-02-17 _(verified: appears in the quote below)_ > 15190,IS,,ISO 8126:2000,"Micrographics — Duplicating film, silver, diazo and vesicular — Visual density — Specifications and measurement","Micrographie — Films de duplication argentiques, diazoïques et vésiculaires — Densité visuelle — Spécifications et mesurage",2000-02-17,2,['37.080'],ISO/TC 171,9599,[15189],[76658],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 813:1974 - **Identifier:** ISO 813:1974 _(verified: appears in the quote below)_ - **Item title:** Vulcanized rubber — Determination of adhesion to metal — One-plate method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 813:1986 - **Withdrawn / published date:** 1974-06-01 _(verified: appears in the quote below)_ > 5160,IS,,ISO 813:1974,Vulcanized rubber — Determination of adhesion to metal — One-plate method,Élastomères vulcanisés — Détermination de l'adhérence au métal — Méthode à une plaque,1974-06-01,1,['83.060'],ISO/TC 45,9599,,[5161],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 813:1986 - **Identifier:** ISO 813:1986 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized — Determination of adhesion to metal — One-plate method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 813:1997 - **Withdrawn / published date:** 1986-09-11 _(verified: appears in the quote below)_ > 5161,IS,,ISO 813:1986,"Rubber, vulcanized — Determination of adhesion to metal — One-plate method",Caoutchouc vulcanisé — Détermination de l'adhérence au métal — Méthode à une plaque,1986-09-11,2,['83.060'],ISO/TC 45/SC 2,9599,[5160],[20166],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 813:1997 - **Identifier:** ISO 813:1997 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 813:2010 - **Withdrawn / published date:** 1997-02-20 _(verified: appears in the quote below)_ > 20166,IS,,ISO 813:1997,"Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence à un substrat rigide — Méthode par pelage à angle droit,1997-02-20,3,['83.060'],ISO/TC 45/SC 2,9599,[5161],[50752],"['en','fr']",7,
Describes a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate using a test piece comprising a strip of rubber bonded to a single plate of rigid material. Applicable primarily to test pieces prepared in the laboratory under standard conditions. Replaces the second edition.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 813:2010 - **Identifier:** ISO 813:2010 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 813:2016 - **Withdrawn / published date:** 2010-07-21 _(verified: appears in the quote below)_ > 50752,IS,,ISO 813:2010,"Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence à un substrat rigide — Méthode par pelage à angle droit,2010-07-21,4,['83.060'],ISO/TC 45/SC 2,9599,[20166],[70296],"['en','fr']",10,"ISO 813:2010 specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90°.
The method is applicable primarily to test pieces prepared in th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 813:2016 - **Identifier:** ISO 813:2016 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 813:2019 - **Withdrawn / published date:** 2016-05-10 _(verified: appears in the quote below)_ > 70296,IS,,ISO 813:2016,"Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence à un substrat rigide — Méthode par pelage à angle droit,2016-05-10,5,['83.060'],ISO/TC 45/SC 2,9599,[50752],[77421],"['en','fr']",10,"
ISO 813:2016 specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90°.
The method is applicable primarily to test pieces prepared in th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8130-1:1992 - **Identifier:** ISO 8130-1:1992 _(verified: appears in the quote below)_ - **Item title:** Coating powders — Part 1: Determination of particle size distribution by sieving _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8130-1:2019 - **Withdrawn / published date:** 1992-12-03 _(verified: appears in the quote below)_ > 15200,IS,,ISO 8130-1:1992,Coating powders — Part 1: Determination of particle size distribution by sieving,Poudres pour revêtement — Partie 1: Détermination de la distribution granulométrique par tamisage,1992-12-03,1,['87.040'],ISO/TC 35/SC 9,9599,,[68393],"['en','fr']",4,"
The method discriminates between particles in the size range from 32 µm to 300 µm using circular test sieves with a sieving area having a diameter of 200 mm. It can also be used as an abbreviated procedure, i.e. for determination of the residue on one single sieve only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8130-10:1998 - **Identifier:** ISO 8130-10:1998 _(verified: appears in the quote below)_ - **Item title:** Coating powders — Part 10: Determination of deposition efficiency _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 8130-10 | ISO 8130-10:2021 - **Withdrawn / published date:** 1998-05-07 _(verified: appears in the quote below)_ > 22701,IS,,ISO 8130-10:1998,Coating powders — Part 10: Determination of deposition efficiency,Poudres pour revêtement — Partie 10: Détermination du rendement d'application,1998-05-07,1,['87.040'],ISO/TC 35/SC 9,9599,,"[68402,80812]","['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8130-11:1997 - **Identifier:** ISO 8130-11:1997 _(verified: appears in the quote below)_ - **Item title:** Coating powders — Part 11: Inclined-plane flow test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8130-11:2019 - **Withdrawn / published date:** 1997-06-05 _(verified: appears in the quote below)_ > 22700,IS,,ISO 8130-11:1997,Coating powders — Part 11: Inclined-plane flow test,Poudres pour revêtement — Partie 11: Essai d'écoulement sur plan incliné,1997-06-05,1,['87.040'],ISO/TC 35/SC 9,9599,,[68403],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8130-12:1998 - **Identifier:** ISO 8130-12:1998 _(verified: appears in the quote below)_ - **Item title:** Coating powders — Part 12: Determination of compatibility _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8130-12:2019 - **Withdrawn / published date:** 1998-05-07 _(verified: appears in the quote below)_ > 22702,IS,,ISO 8130-12:1998,Coating powders — Part 12: Determination of compatibility,Poudres pour revêtement — Partie 12: Détermination de la compatibilité,1998-05-07,1,['87.040'],ISO/TC 35/SC 9,9599,,[68404],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 166](https://referencesource.org/iso-standard-supersessions/p/166/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 168](https://referencesource.org/iso-standard-supersessions/p/168/) Last verified: 2026-08-05. Review by: 2027-02-02.