ISO 8029:2007 specifies the requirements for four types of textile-reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of -10 °C to +55 °C.
Such hoses are classified into four types, as follows:
Specifies a method for assessing the flammability of hoses, except for hoses intended for use with petroleum fuels for combustion engines. Restricted to hoses of sizes up to and including 50 mm nominal bore. Replaces the first edition.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8031:1987 - **Identifier:** ISO 8031:1987 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hoses and hose assemblies — Determination of electrical resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8031:1993 - **Withdrawn / published date:** 1987-12-03 _(verified: appears in the quote below)_ > 15041,IS,,ISO 8031:1987,Rubber and plastics hoses and hose assemblies — Determination of electrical resistance,Tuyaux et flexibles en caoutchouc et en plastique — Détermination de la résistance électrique,1987-12-03,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[21874],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8031:1993 - **Identifier:** ISO 8031:1993 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hoses and hose assemblies — Determination of electrical resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8031:2009 - **Withdrawn / published date:** 1993-12-23 _(verified: appears in the quote below)_ > 21874,IS,,ISO 8031:1993,Rubber and plastics hoses and hose assemblies — Determination of electrical resistance,Tuyaux et flexibles en caoutchouc et en plastique — Détermination de la résistance électrique,1993-12-23,2,['23.040.70'],ISO/TC 45/SC 1,9599,[15041],[41795],"['en','fr']",4,"Specifies methods for electrical tests on rubber and plastic hoses and hose assemblies to determine the resistance of conductive, antistatic and non-conductive hoses, the electrical continuity between fittings, and the electrical discontinuity.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8031:2009 - **Identifier:** ISO 8031:2009 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8031:2020 - **Withdrawn / published date:** 2009-10-05 _(verified: appears in the quote below)_ > 41795,IS,,ISO 8031:2009,Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity,Tuyaux et flexibles en caoutchouc et en plastique — Détermination de la résistance et de la conductivité électriques,2009-10-05,3,['23.040.70'],ISO/TC 45/SC 1,9599,[21874],[80489],"['en','fr','ru']",15,"ISO 8031:2009 specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance of conductive, antistatic and non-conductive hoses and the electrical continuity or discontinuity between metal end fittings.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8032:1987 - **Identifier:** ISO 8032:1987 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test (Half omega test) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8032:1997 - **Withdrawn / published date:** 1987-11-05 _(verified: appears in the quote below)_ > 15042,IS,,ISO 8032:1987,Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test (Half omega test),Flexibles hydrauliques en caoutchouc et en plastique — Essai de flexion combiné avec des impulsions de pression (Essai demi-oméga),1987-11-05,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[21875],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8033:1985 - **Identifier:** ISO 8033:1985 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hose — Determination of adhesion between components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8033:1991 - **Withdrawn / published date:** 1985-07-11 _(verified: appears in the quote below)_ > 15043,IS,,ISO 8033:1985,Rubber and plastics hose — Determination of adhesion between components,Tuyaux en caoutchouc et en plastique — Détermination de l'adhérence entre éléments,1985-07-11,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[15044],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8033:1991 - **Identifier:** ISO 8033:1991 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hose — Determination of adhesion between components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8033:2006 - **Withdrawn / published date:** 1991-12-05 _(verified: appears in the quote below)_ > 15044,IS,,ISO 8033:1991,Rubber and plastics hose — Determination of adhesion between components,Tuyaux en caoutchouc et en plastique — Détermination de l'adhérence entre éléments,1991-12-05,2,['23.040.70'],ISO/TC 45/SC 1,9599,[15043],[39356],"['en','fr']",9,"Covers all bore sizes and the following construction types: woven textile fabric, braided yarns and wires, spirally yarns and wires, knitted yarns, circular woven yarns, textile cord fabric, hoses containing a supporting helix. This second edition cancels and replaces the first edition (1985).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8033:2006 - **Identifier:** ISO 8033:2006 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hoses — Determination of adhesion between components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8033:2016 - **Withdrawn / published date:** 2006-07-06 _(verified: appears in the quote below)_ > 39356,IS,,ISO 8033:2006,Rubber and plastics hoses — Determination of adhesion between components,Tuyaux en caoutchouc et en plastique — Détermination de l'adhérence entre éléments,2006-07-06,3,['23.040.70'],ISO/TC 45/SC 1,9599,[15044],[68055],"['en','fr']",11,"Adequate adhesion between the various components of a hose is essential if it is to perform satisfactorily in service. ISO 8033:2006 specifies methods for the determination of the adhesion between lining and reinforcement, between cover and reinforcement, between reinforcement layers, between cover and outer lamination (thin layer of material outside the cover for protection) and between lining and inner lamination (thin layer of ma Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8036-1:1986 - **Identifier:** ISO 8036-1:1986 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Microscopes — Part 1: Immersion oil for general use in light microscopy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8036-1:1998 - **Withdrawn / published date:** 1986-09-18 _(verified: appears in the quote below)_ > 15047,IS,,ISO 8036-1:1986,Optics and optical instruments — Microscopes — Part 1: Immersion oil for general use in light microscopy,Optique et instruments d'optique — Microscopes — Partie 1: Huile d'immersion pour usage général en microscopie optique,1986-09-18,1,['37.020'],ISO/TC 172/SC 5,9599,,[26918],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8036-1:1998 - **Identifier:** ISO 8036-1:1998 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Microscopes — Part 1: Immersion oil for general use in light microscopy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8036:2006 - **Withdrawn / published date:** 1998-03-05 _(verified: appears in the quote below)_ > 26918,IS,,ISO 8036-1:1998,Optics and optical instruments — Microscopes — Part 1: Immersion oil for general use in light microscopy,Optique et instruments d'optique — Microscopes — Partie 1: Huile d'immersion pour usage général en microscopie optique,1998-03-05,2,['37.020'],ISO/TC 172/SC 5,9599,[15047],[39399],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8036:2006 - **Identifier:** ISO 8036:2006 _(verified: appears in the quote below)_ - **Item title:** Optics and photonics — Microscopes — Immersion liquids for light microscopy _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8036:2015 - **Withdrawn / published date:** 2006-05-16 _(verified: appears in the quote below)_ > 39399,IS,,ISO 8036:2006,Optics and photonics — Microscopes — Immersion liquids for light microscopy,Optique et photonique — Microscopes — Liquides d'immersion pour microscopie optique,2006-05-16,1,['37.020'],ISO/TC 172/SC 5,9599,[26918],[67551],['en'],5,"
ISO 8036:2006 describes the characteristics of immersion liquids used in microscopy. It classifies immersion liquids according to their field of application and specifies requirements and test methods for each type.
The standard further specifies a system of designation for immersion liquids, the information to be included on container labels and the information to be supplied in technical data sheets.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80369-1:2010 - **Identifier:** ISO 80369-1:2010 _(verified: appears in the quote below)_ - **Item title:** Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80369-1:2018 - **Withdrawn / published date:** 2010-12-08 _(verified: appears in the quote below)_ > 45976,IS,,ISO 80369-1:2010,Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements,Raccords de petite taille pour liquides et gaz utilisés dans le domaine de la santé — Partie 1: Exigences générales,2010-12-08,1,"['11.040.10','11.040.20']",ISO/TC 210,9599,,[64419],"['en','fr']",17,"ISO 80369-1:2010 specifies general requirements for small-bore connectors, which convey liquids or gases in healthcare applications. These small-bore connectors are used in medical devices or accessories intended for use with a patient.
ISO 80369-1:2010 also specifies the healthcare fields in which these small-bore connectors are intended to be used.
T Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80369-1:2018 - **Identifier:** ISO 80369-1:2018 _(verified: appears in the quote below)_ - **Item title:** Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80369-1:2025 - **Withdrawn / published date:** 2018-11-05 _(verified: appears in the quote below)_ > 64419,IS,,ISO 80369-1:2018,Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements,Raccords de petite taille pour liquides et gaz utilisés dans le domaine de la santé — Partie 1: Exigences générales,2018-11-05,2,"['11.040.10','11.040.20']",ISO/TC 210,9599,[45976],[82071],"['en','fr']",31,"
This document specifies general requirements for small-bore connectors, which convey liquids or gases in healthcare applications. These small-bore connectors are used in medical devices or accessories intended for use with a patient.
This document also specifies the healthcare fields in which these small-bore connectors are intended to be used.
Th Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80369-20:2015 - **Identifier:** ISO 80369-20:2015 _(verified: appears in the quote below)_ - **Item title:** Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80369-20:2024 - **Withdrawn / published date:** 2015-05-11 _(verified: appears in the quote below)_ > 63837,IS,,ISO 80369-20:2015,Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods,Raccords de petite taille pour liquides et gaz utilisés dans le domaine de la santé — Partie 20: Méthodes d'essai communes,2015-05-11,1,['11.040.25'],ISO/TC 210,9599,,[82712],"['en','fr']",29,
ISO 80369-20:2015 specifies the test methods to evaluate the performance requirements for small-bore connectors specified in the ISO 80369‑ series.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80369-6:2016 - **Identifier:** ISO 80369-6:2016 _(verified: appears in the quote below)_ - **Item title:** Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80369-6:2025 - **Withdrawn / published date:** 2016-03-14 _(verified: appears in the quote below)_ > 50734,IS,,ISO 80369-6:2016,Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications,Raccords de petite taille pour liquides et gaz utilisés dans le domaine de la santé — Partie 6: Raccords destinés à des applications en contact avec le système nerveux (neuraxiales),2016-03-14,1,['11.040.25'],ISO/TC 210,9599,,[85462],"['en','fr']",45,"ISO 80369-6:2016 specifies requirements for small-bore connectors intended to be used for connections in neuraxial applications. Neuraxial applications involve the use of medical devices intended to administer medications to neuraxial sites, wound infiltration anaesthesia delivery, and other region Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80369-7:2016 - **Identifier:** ISO 80369-7:2016 _(verified: appears in the quote below)_ - **Item title:** Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80369-7:2021 - **Withdrawn / published date:** 2016-10-14 _(verified: appears in the quote below)_ > 58011,IS,,ISO 80369-7:2016,Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications,Raccords de petite taille pour liquides et gaz utilisés dans le domaine de la santé — Partie 7: Raccords à 6 % (Luer) destinés aux applications intravasculaires ou hypodermiques,2016-10-14,1,['11.040.25'],ISO/TC 210,9599,"[29540,4693]",[79173],"['en','fr']",43,"
ISO 80369-7:2016 specifies dimensions and requirements for the design and functional performance of small-bore connectors intended to be used for connections in intravascular applications or hypodermic connections in hypodermic applications of medical devices and accesso Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8038-1:1997 - **Identifier:** ISO 8038-1:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 1: Screw thread type RMS (4/5 in x 1/36 in) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8038:2011 - **Withdrawn / published date:** 1997-12-11 _(verified: appears in the quote below)_ > 26919,IS,,ISO 8038-1:1997,Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 1: Screw thread type RMS (4/5 in x 1/36 in),Optique et instruments d'optique — Microscopes — Filetages de fixation des objectifs et des porte-objectifs correspondants — Partie 1: Filetage de type RMS (4/5 in x 1/36 in),1997-12-11,1,['37.020'],ISO/TC 172/SC 5,9599,[15050],[53790],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8038:1985 - **Identifier:** ISO 8038:1985 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Microscopes — Screw thread for objectives _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8038-1:1997 - **Withdrawn / published date:** 1985-11-14 _(verified: appears in the quote below)_ > 15050,IS,,ISO 8038:1985,Optics and optical instruments — Microscopes — Screw thread for objectives,Optique et instruments d'optique — Microscopes — Filetage de fixation des objectifs,1985-11-14,1,['37.020'],ISO/TC 172/SC 5,9599,,[26919],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8038-2:2001 - **Identifier:** ISO 8038-2:2001 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Screw threads for microscope objectives and related nosepieces — Part 2: Screw thread type M25 X 0,75 mm _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8038:2011 - **Withdrawn / published date:** 2001-01-25 _(verified: appears in the quote below)_ > 33192,IS,,ISO 8038-2:2001,"Optics and optical instruments — Screw threads for microscope objectives and related nosepieces — Part 2: Screw thread type M25 X 0,75 mm","Optique et instruments d'optique — Filetages de fixation des objectifs pour microscopes et des porte-objectifs correspondants — Partie 2: Filetage de type M25 X 0,75 mm",2001-01-25,1,['37.020'],ISO/TC 172/SC 5,9599,,[53790],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8038:2011 - **Identifier:** ISO 8038:2011 _(verified: appears in the quote below)_ - **Item title:** Microscopes — Screw threads for objectives and related nosepieces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8038:2013 - **Withdrawn / published date:** 2011-04-07 _(verified: appears in the quote below)_ > 53790,IS,,ISO 8038:2011,Microscopes — Screw threads for objectives and related nosepieces,Microscopes — Filetages de fixation des objectifs et des porte-objectifs correspondants,2011-04-07,2,['37.020'],ISO/TC 172/SC 5,9599,"[26919,33192]",[62859],['en'],5,
ISO 8038:2011 specifies the dimensions of screw thread types for connecting a microscope objective to the nosepiece.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8038:2013 - **Identifier:** ISO 8038:2013 _(verified: appears in the quote below)_ - **Item title:** Microscopes — Screw threads for objectives and related nosepieces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9345:2019 - **Withdrawn / published date:** 2013-10-23 _(verified: appears in the quote below)_ > 62859,IS,,ISO 8038:2013,Microscopes — Screw threads for objectives and related nosepieces,Microscopes — Filetages de fixation des objectifs et des porte-objectifs correspondants,2013-10-23,3,['37.020'],ISO/TC 172/SC 5,9599,[53790],[70798],['en'],5,ISO 8038:2013 specifies the dimensions of screw thread types for connecting a microscope objective to the nosepiece.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8039:1997 - **Identifier:** ISO 8039:1997 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Microscopes — Magnification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8039:2012 - **Withdrawn / published date:** 1997-11-13 _(verified: appears in the quote below)_ > 15051,IS,,ISO 8039:1997,Optics and optical instruments — Microscopes — Magnification,Optique et instruments d'optique — Microscopes — Grossissement,1997-11-13,1,['37.020'],ISO/TC 172/SC 5,9599,,[50987],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8039:2012 - **Identifier:** ISO 8039:2012 _(verified: appears in the quote below)_ - **Item title:** Microscopes — Values, tolerances and symbols for magnification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8039:2014 - **Withdrawn / published date:** 2012-09-28 _(verified: appears in the quote below)_ > 50987,IS,,ISO 8039:2012,"Microscopes — Values, tolerances and symbols for magnification","Microscopes — Valeurs, tolérances et symboles de grossissement",2012-09-28,2,['37.020'],ISO/TC 172/SC 5,9599,[15051],[66260],['en'],3,"ISO 8039:2012 specifies a series of values, tolerances and symbols for the magnification of imaging components of light microscopes and defines a number of imaging components and magnifying systems to which they apply.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8040:1986 - **Identifier:** ISO 8040:1986 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Microscopes — Connecting dimensions of tube slides and tube slots _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8040:2001 - **Withdrawn / published date:** 1986-09-18 _(verified: appears in the quote below)_ > 15052,IS,,ISO 8040:1986,Optics and optical instruments — Microscopes — Connecting dimensions of tube slides and tube slots,Optique et instruments d'optique — Microscopes — Cotes de liaison entre les tirettes et leurs logements,1986-09-18,1,['37.020'],ISO/TC 172/SC 5,9599,,[29651],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8041:1990 - **Identifier:** ISO 8041:1990 _(verified: appears in the quote below)_ - **Item title:** Human response to vibration — Measuring instrumentation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8041:2005 - **Withdrawn / published date:** 1990-07-12 _(verified: appears in the quote below)_ > 15053,IS,,ISO 8041:1990,Human response to vibration — Measuring instrumentation,Réponse des individus aux vibrations — Appareillage de mesure,1990-07-12,1,['13.160'],ISO/TC 108,9599,,[30145],"['en','fr']",24, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8041:1990/Amd 1:1999 - **Identifier:** ISO 8041:1990/Amd 1:1999 _(verified: appears in the quote below)_ - **Item title:** Human response to vibration — Measuring instrumentation — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8041:2005 | ISO/NP 8041 - **Withdrawn / published date:** 1999-11-04 _(verified: appears in the quote below)_ > 27055,IS,Amd,ISO 8041:1990/Amd 1:1999,Human response to vibration — Measuring instrumentation — Amendment 1,Réponse des individus aux vibrations — Appareillage de mesure — Amendement 1,1999-11-04,1,['13.160'],ISO/TC 108,9599,,"[30145,40602]","['en','fr']",23, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8041:1990/Cor 1:1993 - **Identifier:** ISO 8041:1990/Cor 1:1993 _(verified: appears in the quote below)_ - **Item title:** Human response to vibration — Measuring instrumentation — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8041:2005 | ISO/NP 8041 - **Withdrawn / published date:** 1993-06-24 _(verified: appears in the quote below)_ > 22320,IS,Cor,ISO 8041:1990/Cor 1:1993,Human response to vibration — Measuring instrumentation — Technical Corrigendum 1,Réponse des individus aux vibrations — Appareillage de mesure — Rectificatif technique 1,1993-06-24,1,['13.160'],ISO/TC 108,9599,,"[30145,40602]","['en','fr']",3,"Amends Foreword, subclauses 3.3.2, 4.3.2, 9.2, D.1, D.2, replaces figure D.1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8041:2005 - **Identifier:** ISO 8041:2005 _(verified: appears in the quote below)_ - **Item title:** Human response to vibration — Measuring instrumentation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8041-1:2017 - **Withdrawn / published date:** 2005-04-06 _(verified: appears in the quote below)_ > 30145,IS,,ISO 8041:2005,Human response to vibration — Measuring instrumentation,Réponse des individus aux vibrations — Appareillage de mesure,2005-04-06,2,['13.160'],ISO/TC 108,9599,"[15053,22320,27055]",[70648],"['en','fr']",91,"ISO 8041:2005 specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requirements for pattern evaluation, periodic verification and in-situ checks, and the specification of vibration calibrators for in-situ checks.
Vibration instruments specified in ISO 8041:2005 can be single instruments, combinations of instrumen Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8041:2005/Cor 1:2007 - **Identifier:** ISO 8041:2005/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Human response to vibration — Measuring instrumentation — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8041-1:2017 - **Withdrawn / published date:** 2007-11-05 _(verified: appears in the quote below)_ > 50575,IS,Cor,ISO 8041:2005/Cor 1:2007,Human response to vibration — Measuring instrumentation — Technical Corrigendum 1,Réponse des individus aux vibrations — Appareillage de mesure — Rectificatif technique 1,2007-11-05,2,['13.160'],ISO/TC 108,9599,,[70648],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8044:1986 - **Identifier:** ISO 8044:1986 _(verified: appears in the quote below)_ - **Item title:** Corrosion of metals and alloys — Terms and definitions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8044:1989 - **Withdrawn / published date:** 1986-12-22 _(verified: appears in the quote below)_ > 15056,IS,,ISO 8044:1986,Corrosion of metals and alloys — Terms and definitions,Corrosion des métaux et alliages — Termes et définitions,1986-12-22,1,"['01.040.77','77.060']",ISO/TC 156,9599,,[15057],"['en','fr','ru']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8044:1989 - **Identifier:** ISO 8044:1989 _(verified: appears in the quote below)_ - **Item title:** Corrosion of metals and alloys — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8044:1999 - **Withdrawn / published date:** 1989-12-14 _(verified: appears in the quote below)_ > 15057,IS,,ISO 8044:1989,Corrosion of metals and alloys — Vocabulary,Corrosion des métaux et alliages — Vocabulaire,1989-12-14,2,"['01.040.77','77.060']",ISO/TC 156,9599,[15056],[26132],"['en','fr','ru']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8044:1989/Amd 1:1993 - **Identifier:** ISO 8044:1989/Amd 1:1993 _(verified: appears in the quote below)_ - **Item title:** Corrosion of metals and alloys — Vocabulary — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8044:1999 - **Withdrawn / published date:** 1993-05-13 _(verified: appears in the quote below)_ > 15059,IS,Amd,ISO 8044:1989/Amd 1:1993,Corrosion of metals and alloys — Vocabulary — Amendment 1,Corrosion des métaux et alliages — Vocabulaire — Amendement 1,1993-05-13,2,"['01.040.77','77.060']",ISO/TC 156,9599,,[26132],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8044:1999 - **Identifier:** ISO 8044:1999 _(verified: appears in the quote below)_ - **Item title:** Corrosion of metals and alloys — Basic terms and definitions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8044:2015 - **Withdrawn / published date:** 1999-12-16 _(verified: appears in the quote below)_ > 26132,IS,,ISO 8044:1999,Corrosion of metals and alloys — Basic terms and definitions,Corrosion des métaux et alliages — Termes principaux et définitions,1999-12-16,3,"['01.040.77','77.060']",ISO/TC 156,9599,"[15059,15057]",[66233],"['en','fr','ru']",65, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8044:2015 - **Identifier:** ISO 8044:2015 _(verified: appears in the quote below)_ - **Item title:** Corrosion of metals and alloys — Basic terms and definitions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8044:2020 - **Withdrawn / published date:** 2015-08-25 _(verified: appears in the quote below)_ > 66233,IS,,ISO 8044:2015,Corrosion of metals and alloys — Basic terms and definitions,Corrosion des métaux et alliages — Termes principaux et définitions,2015-08-25,4,"['01.040.77','77.060']",ISO/TC 156,9599,[26132],[71134],"['en','fr']",24,"
ISO 8044:2015 defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations.
NOTE 1 Throughout the document IUPAC rules for electrode potential signs are applied. The term 'metal' is also used to include alloys and other metallic materials.
NOTE 2 Terms and definitions related to inorganic surface treatment of metals are given in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8044:2020 - **Identifier:** ISO 8044:2020 _(verified: appears in the quote below)_ - **Item title:** Corrosion of metals and alloys — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8044:2024 - **Withdrawn / published date:** 2020-02-07 _(verified: appears in the quote below)_ > 71134,IS,,ISO 8044:2020,Corrosion of metals and alloys — Vocabulary,Corrosion des métaux et alliages — Vocabulaire,2020-02-07,5,"['01.040.77','77.060']",ISO/TC 156,9599,[66233],[83222],"['en','fr']",29,"
This document defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations.
NOTE 1 Throughout the document, IUPAC rules for electrode potential signs are applied. The term 'metal' is also used to include alloys and other metallic materials.
NOTE 2 Terms and definitions related to the inorganic surface treatment of metals are given in ISO 2080.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8048:1984 - **Identifier:** ISO 8048:1984 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Construction drawings — Representation of views, sections and cuts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 8048 | ISO 128-33:2018 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 15063,IS,,ISO 8048:1984,"Technical drawings — Construction drawings — Representation of views, sections and cuts","Dessins techniques — Dessins de construction — Représentation des vues, des sections et des coupes",1984-12-01,1,['01.100.30'],ISO/TC 10/SC 8,9599,,"[41426,63795]","['en','fr']",5,"General rules are layed down for marking, designation, placing and orientation and the position of text in relation to figures. For all general rules reference is made to ISO 128. As regards relative positions of views, the method using reference arrows according to ISO 128 is applied.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8049:1988 - **Identifier:** ISO 8049:1988 _(verified: appears in the quote below)_ - **Item title:** Ferronickel shot — Sampling for analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8049:2016 - **Withdrawn / published date:** 1988-12-15 _(verified: appears in the quote below)_ > 15064,IS,,ISO 8049:1988,Ferronickel shot — Sampling for analysis,Ferro-nickel en grenailles — Échantillonnage pour analyse,1988-12-15,1,['77.100'],ISO/TC 155,9599,,[65091],"['en','fr']",19,Applies to ferronickel lots in the form of shot as specified in ISO 6501 in those cases where lots are constituted either heat by heat or by taking from blendes stock. The purpose is to determine the contents of the various elements either from slugs by physical analysis methods or from chips by dry methods or chemical analysis.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8051:1989 - **Identifier:** ISO 8051:1989 _(verified: appears in the quote below)_ - **Item title:** Long shank taps with nominal diameters from M3 to M10 — Taps with reinforced shank and recess _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8051:1999 - **Withdrawn / published date:** 1989-10-19 _(verified: appears in the quote below)_ > 15066,IS,,ISO 8051:1989,Long shank taps with nominal diameters from M3 to M10 — Taps with reinforced shank and recess,"Tarauds à machine, à queue longue, de diamètre nominal M3 à M10 — Tarauds à queue pleine, à gorge",1989-10-19,1,['25.100.50'],ISO/TC 29,9599,,[28556],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8051:1999 - **Identifier:** ISO 8051:1999 _(verified: appears in the quote below)_ - **Item title:** Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8051:2016 - **Withdrawn / published date:** 1999-03-04 _(verified: appears in the quote below)_ > 28556,IS,,ISO 8051:1999,Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess,"Tarauds à machine, à queue longue, de diamètre nominal M3 à M10 — Tarauds à queue pleine, à gorge",1999-03-04,2,['25.100.50'],ISO/TC 29/SC 9,9599,[15066],[60700],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8052:1984 - **Identifier:** ISO 8052:1984 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Mopeds — D.C. flasher units _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8052:1990 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 15067,IS,,ISO 8052:1984,Road vehicles — Mopeds — D.C. flasher units,Véhicules routiers — Cyclomoteurs — Centrales clignotantes en courant continu,1984-10-01,1,['43.140'],ISO/TC 22,9599,,[15068],['en'],5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8053:1986 - **Identifier:** ISO 8053:1986 _(verified: appears in the quote below)_ - **Item title:** Rubber and latex — Determination of copper content — Photometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8053:1995 - **Withdrawn / published date:** 1986-11-20 _(verified: appears in the quote below)_ > 15069,IS,,ISO 8053:1986,Rubber and latex — Determination of copper content — Photometric method,Caoutchouc et latex — Dosage du cuivre — Méthode photométrique Caoutchouc et latex — Dosage du cuivre — Méthode photométrique,1986-11-20,1,"['83.060','83.040.10']",ISO/TC 45,9599,"[6270,5982]",[20154],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8054:1988 - **Identifier:** ISO 8054:1988 _(verified: appears in the quote below)_ - **Item title:** Rubber, compounded or vulcanized — Determination of sulfide sulfur content — Iodometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8054:1996 - **Withdrawn / published date:** 1988-11-24 _(verified: appears in the quote below)_ > 15070,IS,,ISO 8054:1988,"Rubber, compounded or vulcanized — Determination of sulfide sulfur content — Iodometric method",Caoutchouc vulcanisé ou non vulcanisé — Dosage du soufre sous forme de sulfure — Méthode iodométrique,1988-11-24,1,['83.060'],ISO/TC 45,9599,,[24255],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 8058:1985 - **Identifier:** ISO 8058:1985 _(verified: appears in the quote below)_ - **Item title:** Air cargo equipment — Air mode insulated containers — Thermal efficiency requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 8058:1999 - **Withdrawn / published date:** 1985-05-16 _(verified: appears in the quote below)_ > 15076,IS,,ISO 8058:1985,Air cargo equipment — Air mode insulated containers — Thermal efficiency requirements,Équipement pour le fret aérien — Conteneurs isothermes pour transport aérien — Caractéristiques de rendement thermique,1985-05-16,1,['55.180.30'],ISO/TC 20/SC 9,9599,,[1522],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 806:1976 - **Identifier:** ISO 806:1976 _(verified: appears in the quote below)_ - **Item title:** Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 1 000 degrees C and 1 200 degrees C _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 806:2004 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 5151,IS,,ISO 806:1976,Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 1 000 degrees C and 1 200 degrees C,Oxyde d'aluminium principalement utilisé pour la production de l'aluminium — Détermination de la perte de masse à 1 000 degrés C et à 1 200 degrés C,1976-09-01,1,['71.100.10'],ISO/TC 226,9599,,[36360],"['en','fr']",3,"The temperatures are arbitrarily selected and specified because there is no specific calcination temperature. There is no criterion for the state of calcination. Therefore, ignition of two test portions taken from the same sample and previously dried in a muffle furnace for 2 h. Calculation by difference in mass. Replaces Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-12:2011 - **Identifier:** ISO 80601-2-12:2011 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-12:2020 - **Withdrawn / published date:** 2011-04-07 _(verified: appears in the quote below)_ > 51141,IS,,ISO 80601-2-12:2011,Medical electrical equipment — Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators,Appareils électromédicaux — Partie 2-12: Exigences particulières relatives à la sécurité de base et aux performances essentielles des ventilateurs pulmonaires pour utilisation en soins intensifs,2011-04-07,1,['11.040.10'],ISO/TC 121/SC 3,9599,[23914],[72069],"['en','fr']",78,"
ISO 80601-2-12:2011 applies to the basic safety and essential performance of a ventilator in combination with its accessories, hereafter referred to as me equipment:
This document applies to the basic safety and essential performance of a ventilator in combination with its accessories, hereafter referred to as ME equipment:
ISO/IEC 80601-2-13:2011 is applicable to the basic safety and essential performance of an anaesthetic workstation for administering inhalational anaesthesia whilst continuously attended by a professional operator.
ISO/IEC 80601-2-13:2011 specif Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-13:2011/Amd 1:2015 - **Identifier:** ISO 80601-2-13:2011/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-13:2022 - **Withdrawn / published date:** 2015-03-06 _(verified: appears in the quote below)_ > 61685,IS,Amd,ISO 80601-2-13:2011/Amd 1:2015,Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amendment 1,Appareils électromédicaux — Partie 2-13: Exigences particulières de sécurité de base et de performances essentielles pour les postes de travail d'anesthésie — Amendement 1,2015-03-06,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[76679],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-13:2011/Amd 2:2018 - **Identifier:** ISO 80601-2-13:2011/Amd 2:2018 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-13:2022 - **Withdrawn / published date:** 2018-07-19 _(verified: appears in the quote below)_ > 71537,IS,Amd,ISO 80601-2-13:2011/Amd 2:2018,Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amendment 2,Appareils électromédicaux — Partie 2-13: Exigences particulières de sécurité de base et de performances essentielles pour les postes de travail d'anesthésie — Amendement 2,2018-07-19,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[76679],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-55:2011 - **Identifier:** ISO 80601-2-55:2011 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-55:2018 - **Withdrawn / published date:** 2011-12-15 _(verified: appears in the quote below)_ > 52211,IS,,ISO 80601-2-55:2011,Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors,Appareils électromédicaux — Partie 2-55: Exigences particulières relatives à la sécurité de base et aux performances essentielles des moniteurs de gaz respiratoires,2011-12-15,1,['11.040.10'],ISO/TC 121/SC 1,9599,"[34637,42637]",[67241],"['en','fr']",52,"
ISO 80601-2-55:2011 specifies particular requirements for the basic safety and essential performance of a respiratory gas monitor (RGM) intended for continuous operation for use with a patient.
ISO 80601-2-55:2011 specifies requirements for:
ISO 80601-2-56:2009 applies to the basic safety and essential performance of a clinical thermometer in combination with its accessories, referred to as ME equipment. ISO 80601-2-56:2009 specifies the general and technical Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-61:2011 - **Identifier:** ISO 80601-2-61:2011 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-61:2017 - **Withdrawn / published date:** 2011-03-16 _(verified: appears in the quote below)_ > 51847,IS,,ISO 80601-2-61:2011,Medical electrical equipment — Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment,Appareils électromédicaux — Partie 2-61: Exigences particulières pour la sécurité de base et les performances essentielles pour les oxymètres de pouls,2011-03-16,1,['11.040.10'],ISO/TC 121/SC 3,9599,[33780],[67963],"['en','fr','ru']",83,"
ISO 80601-2-61:2011 applies to the basic safety and essential performance of pulse oximeter equipment intended for use on humans, hereafter referred to as ME equipment. This includes any part necessary for normal use, including the pulse oximeter monitor, pulse oximeter probe, and probe cabl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-61:2017 - **Identifier:** ISO 80601-2-61:2017 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-61:2026 - **Withdrawn / published date:** 2017-12-15 _(verified: appears in the quote below)_ > 67963,IS,,ISO 80601-2-61:2017,Medical electrical equipment — Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment,Appareils électromédicaux — Partie 2-61: Exigences particulières pour la sécurité de base et les performances essentielles pour les oxymètres de pouls,2017-12-15,2,['11.040.10'],ISO/TC 121/SC 3,9599,[51847],[84595],"['en','fr']",90,"
ISO 80601-2-61:2017 applies to the basic safety and essential performance of pulse oximeter equipment intended for use on humans, hereafter referred to as me equipment. This includes any part necessary for normal use, including the pulse oximeter monitor, pulse oximeter probe, and probe cable ext Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-67:2014 - **Identifier:** ISO 80601-2-67:2014 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-67:2020 - **Withdrawn / published date:** 2014-05-14 _(verified: appears in the quote below)_ > 46478,IS,,ISO 80601-2-67:2014,Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment,Appareils électromédicaux — Partie 2-67: Exigences particulières pour la sécurité de base et les performances essentielles dee économiseurs d'oxygène,2014-05-14,1,['11.040.10'],ISO/TC 121/SC 3,9599,[38872],[75945],"['en','fr']",43,"
ISO 80601-2-67:2014 is applicable to the basic safety and essential performance of oxygen conserving equipment, hereafter referred to as me equipment, in combination with its accessories intended to conserve supplemental oxygen by delivering gas intermittently and synchronized with the patient' Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-67:2020 - **Identifier:** ISO 80601-2-67:2020 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-67:2026 - **Withdrawn / published date:** 2020-10-30 _(verified: appears in the quote below)_ > 75945,IS,,ISO 80601-2-67:2020,Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment,Appareils électromédicaux — Partie 2-67: Exigences particulières pour la sécurité de base et les performances essentielles des économiseurs d'oxygène,2020-10-30,2,['11.040.10'],ISO/TC 121/SC 3,9599,[46478],[87163],"['en','fr']",57,"
This document is applicable to the basic safety and essential performance of oxygen conserving equipment, hereafter referred to as ME equipment, in combination with its accessories intended to conserve supplemental oxygen by delivering gas intermittently and s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-69:2014 - **Identifier:** ISO 80601-2-69:2014 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-69:2020 - **Withdrawn / published date:** 2014-07-15 _(verified: appears in the quote below)_ > 59978,IS,,ISO 80601-2-69:2014,Medical electrical equipment — Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment,Appareils électromédicaux — Partie 2-69: Exigences particulières pour la sécurité de base et les performances essentielles des dispositifs concentrateurs d'oxygène,2014-07-15,1,['11.040.10'],ISO/TC 121/SC 3,9599,"[22625,60989]",[75946],"['en','fr']",42,"
ISO 80601-2-69:2014 specifies requirements for the basic safety and essential performance of an oxygen concentrator in combination with its accessories, hereafter referred to as ME equipment, intended to increase the oxygen concentration of gas intended to be delivered t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-69:2020 - **Identifier:** ISO 80601-2-69:2020 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-69:2026 - **Withdrawn / published date:** 2020-11-06 _(verified: appears in the quote below)_ > 75946,IS,,ISO 80601-2-69:2020,Medical electrical equipment — Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment,Appareils électromédicaux — Partie 2-69: Exigences particulières pour la sécurité de base et les performances essentielles des dispositifs concentrateurs d'oxygène,2020-11-06,2,['11.040.10'],ISO/TC 121/SC 3,9599,[59978],[87164],"['en','fr']",62,"
This document specifies requirements for the basic safety and essential performance of an oxygen concentrator in combination with its accessories, hereafter referred to as ME equipment, intended to increase the oxygen concentration o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-70:2015 - **Identifier:** ISO 80601-2-70:2015 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-70:2020 - **Withdrawn / published date:** 2015-01-12 _(verified: appears in the quote below)_ > 60049,IS,,ISO 80601-2-70:2015,Medical electrical equipment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment,Appareils électromédicaux — Partie 2-70: Exigences particulières pour la sécurité de base et les performances essentielles du matériel de traitement respiratoire de l'apnée du sommeil,2015-01-12,1,['11.040.10'],ISO/TC 121/SC 3,9599,[41615],[75947],"['en','fr']",46,"
ISO 80601-2-70:2015 is applicable to the basic safety and essential performance of sleep apnoea breathing therapy equipment, hereafter referred to as me equipment, intended to alleviate the symptoms of patients who suffer from obstructive sleep apn Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-70:2020 - **Identifier:** ISO 80601-2-70:2020 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-70:2025 - **Withdrawn / published date:** 2020-11-17 _(verified: appears in the quote below)_ > 75947,IS,,ISO 80601-2-70:2020,Medical electrical equipment — Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment,Appareils électromédicaux — Partie 2-70: Exigences particulières pour la sécurité de base et les performances essentielles de l'équipement de thérapie respiratoire pour l'apnée du sommeil,2020-11-17,2,['11.040.10'],ISO/TC 121/SC 3,9599,[60049],[87160],"['en','fr']",68,"
This document is applicable to the basic safety and essential performance of sleep apnoea breathing therapy equipment, hereafter referred to as ME equipment, intended to alleviate the symptoms of patients Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-72:2015 - **Identifier:** ISO 80601-2-72:2015 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-72:2023 - **Withdrawn / published date:** 2015-09-01 _(verified: appears in the quote below)_ > 61389,IS,,ISO 80601-2-72:2015,Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients,Appareils électromédicaux — Partie 2-72: Exigences particulières pour la sécurité de base et les performances essentielles des ventilateurs utilisés dans l'environnement des soins à domicile pour les patients ventilo-dépendants,2015-09-01,1,['11.040.10'],ISO/TC 121/SC 3,9599,[35973],[83464],"['en','fr']",87,"
ISO 80601-2-72:2015 applies to the basic safety and essential performance of a ventilator in combination with its accessories, hereafter referred to as me equipment:
65008,IS,,ISO 80601-2-74:2017,Medical electrical equipment — Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment,Appareils électromédicaux — Partie 2-74: Exigences particulières pour la sécurité de base et les performances essentielles des équipements d'humidification respiratoire,2017-05-18,1,['11.040.10'],ISO/TC 121/SC 3,9599,[38527],[81613],"['en','fr']",88,"ISO 80601-2-74:2017 applies to the basic safety and essential performance of a humidifier, also hereafter referred to as me equipment, in combination with its accessories, the combination also hereafter referred to as me system.
ISO 80601-2-74:2017 is also applica Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 80601-2-74:2021 - **Identifier:** ISO 80601-2-74:2021 _(verified: appears in the quote below)_ - **Item title:** Medical electrical equipment — Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80601-2-74:2026 - **Withdrawn / published date:** 2021-07-13 _(verified: appears in the quote below)_ > 81613,IS,,ISO 80601-2-74:2021,Medical electrical equipment — Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment,Appareils électromédicaux — Partie 2-74: Exigences particulières pour la sécurité de base et les performances essentielles des équipements d'humidification respiratoire,2021-07-13,2,['11.040.10'],ISO/TC 121/SC 3,9599,[65008],[87155],"['en','fr']",99,"
This document applies to the basic safety and essential performance of a humidifier, also hereafter referred to as ME equipment, in combination with its accessories, the combination also hereafter referred to as ME system
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 80601-2-79:2018
- **Identifier:** ISO 80601-2-79:2018 _(verified: appears in the quote below)_
- **Item title:** Medical electrical equipment — Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 80601-2-79:2024
- **Withdrawn / published date:** 2018-07-18 _(verified: appears in the quote below)_
> 68843,IS,,ISO 80601-2-79:2018,Medical electrical equipment — Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment,Appareils électromédicaux — Partie 2-79: Exigences particulières pour la sécurité de base et les performances essentielles des équipements d'assistance ventilatoire en cas de trouble ventilatoire,2018-07-18,1,['11.040.10'],ISO/TC 121/SC 3,9599,[35974],[83465],"['en','fr']",76," This document applies to the basic safety and essential performance of ventilatory support equipment, as defined in 201.3.205, for ventilatory impairment, as defined in 201.3.202, hereafter also referred to as me equipme
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 80601-2-80:2018
- **Identifier:** ISO 80601-2-80:2018 _(verified: appears in the quote below)_
- **Item title:** Medical electrical equipment — Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 80601-2-80:2024
- **Withdrawn / published date:** 2018-07-18 _(verified: appears in the quote below)_
> 68844,IS,,ISO 80601-2-80:2018,Medical electrical equipment — Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency,Appareils électromédicaux — Partie 2-80: Exigences particulières pour la sécurité de base et les performances essentielles des équipements d'assistance ventilatoire en cas d'insuffisance ventilatoire,2018-07-18,1,['11.040.10'],ISO/TC 121/SC 3,9599,[35974],[83466],"['en','fr']",85," This document applies to the basic safety and essential performance of ventilatory support equipment, as defined in 201.3.205, for ventilatory insufficiency, as defined in 201.3.204, hereafter also referred to as
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 80601-2-84:2020
- **Identifier:** ISO 80601-2-84:2020 _(verified: appears in the quote below)_
- **Item title:** Medical electrical equipment — Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 80601-2-84:2023
- **Withdrawn / published date:** 2020-07-21 _(verified: appears in the quote below)_
> 72441,IS,,ISO 80601-2-84:2020,Medical electrical equipment — Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment,Appareils électromédicaux — Partie 2-84: Exigences particulières relatives à la sécurité de base et aux performances essentielles des ventilateurs utilisés dans l'environnement des services médicaux d'urgence,2020-07-21,1,['11.040.10'],ISO/TC 121/SC 3,9599,[21436],[83438],"['en','fr']",110," This document applies to the basic safety and essential performance of an EMS ventilator in combination with its accessories, hereafter also referred to as ME equ
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 80601-2-90:2021
- **Identifier:** ISO 80601-2-90:2021 _(verified: appears in the quote below)_
- **Item title:** Medical electrical equipment — Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 80601-2-90:2026
- **Withdrawn / published date:** 2021-08-30 _(verified: appears in the quote below)_
> 80858,IS,,ISO 80601-2-90:2021,Medical electrical equipment — Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment,Appareils électromédicaux — Partie 2-90: Exigences particulières pour la sécurité de base et les performances essentielles des équipements de thérapie respiratoire à haut débit,2021-08-30,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[87151],"['en','fr']",89," This document applies to the basic safety and essential performance of respiratory high-flow therapy equipment, as defined in 201.3.220, hereafter also referred to as ME equipment or ME system, in combination with its
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8061:1984
- **Identifier:** ISO 8061:1984 _(verified: appears in the quote below)_
- **Item title:** Alpine skis — Ski bindings — Methods for the selection of release torque values _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8061:1991
- **Withdrawn / published date:** 1984-03-01 _(verified: appears in the quote below)_
> 15080,IS,,ISO 8061:1984,Alpine skis — Ski bindings — Methods for the selection of release torque values,Skis alpins — Fixations — Méthodes de sélection des valeurs du couple de déclenchement,1984-03-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[15081],"['en','fr']",4,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8061:1991
- **Identifier:** ISO 8061:1991 _(verified: appears in the quote below)_
- **Item title:** Alpine ski-bindings — Selection of release torque values _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8061:2004
- **Withdrawn / published date:** 1991-08-15 _(verified: appears in the quote below)_
> 15081,IS,,ISO 8061:1991,Alpine ski-bindings — Selection of release torque values,Fixations de skis alpins — Sélection des valeurs du couple de déclenchement,1991-08-15,2,['97.220.20'],ISO/TC 83/SC 4,9599,[15080],[36307],"['en','fr']",4, Gives information necessary to determine the release torques. The methods apply to torque-measuring binding test machines. This second edition cancels and replaces the first edition (1984). Annex A is for information only. ISO 8061:2004 specifies methods for the selection of the release torques for alpine ski-bindings in current use, and gives information necessary to determine the release torques. It applies to torque-measuring binding-test machines. It may be inappropriate for non-mechanical bindings or bindings used with boots which reach more than half-way up the lower leg. ISO 8061:2015 specifies methods for the selection of the release torques for alpine ski-bindings. It gives information necessary to determine the release torques; these are to be recommended for use by ski-binding manufacturers in their instructions for installation and use, and by ski shops for the adjustment of already mounted ski-bindings. It applies to alpine ski-bindings in current use. It might be inappropriate for non-mechanical
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8062:1984
- **Identifier:** ISO 8062:1984 _(verified: appears in the quote below)_
- **Item title:** Castings — System of dimensional tolerances _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8062:1994
- **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_
> 15082,IS,,ISO 8062:1984,Castings — System of dimensional tolerances,Pièces moulées — Système de tolérances dimensionnelles,1984-10-01,1,['17.040.10'],ISO/TC 213,9599,,[15083],"['en','fr']",5,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8062:1994
- **Identifier:** ISO 8062:1994 _(verified: appears in the quote below)_
- **Item title:** Castings — System of dimensional tolerances and machining allowances _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO/TS 8062-2:2013 | ISO 8062-1:2007 | ISO 8062-3:2007
- **Withdrawn / published date:** 1994-03-24 _(verified: appears in the quote below)_
> 15083,IS,,ISO 8062:1994,Castings — System of dimensional tolerances and machining allowances,Pièces moulées — Système de tolérances dimensionnelles et surépaisseurs d'usinage,1994-03-24,2,['17.040.10'],ISO/TC 213,9599,[15082],"[40496,40494,40495]","['en','fr']",13, Applies to cast metals and their alloys produced by various casting manufacturing processes. Is applicable both to general tolerances and/or required machining allowances given on a drawing and to individual tolerances and/or required machining allowances which are shown immediately following a specific dimension. The system specified applies when the foundry provides the pattern or die equipment or accepts responsibility for pr
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8062-3:2007
- **Identifier:** ISO 8062-3:2007 _(verified: appears in the quote below)_
- **Item title:** Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8062-3:2023
- **Withdrawn / published date:** 2007-05-31 _(verified: appears in the quote below)_
> 40495,IS,,ISO 8062-3:2007,Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings,Spécification géométrique des produits (GPS) — Tolérances dimensionnelles et géométriques des pièces moulées — Partie 3: Tolérances dimensionnelles et géométriques générales et surépaisseurs d'usinage pour les pièces moulées,2007-05-31,1,['17.040.10'],ISO/TC 213,9599,[15083],[77952],"['en','fr']",30," ISO 8062-3:2007 specifies general dimensional and geometrical tolerances, as well as machining allowance grades, for castings as delivered to the purchaser in accordance with
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8062-3:2007/Cor 1:2009
- **Identifier:** ISO 8062-3:2007/Cor 1:2009 _(verified: appears in the quote below)_
- **Item title:** Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings — Technical Corrigendum 1 _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8062-3:2023
- **Withdrawn / published date:** 2009-01-14 _(verified: appears in the quote below)_
> 52988,IS,Cor,ISO 8062-3:2007/Cor 1:2009,Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — Tolérances dimensionnelles et géométriques des pièces moulées — Partie 3: Tolérances dimensionnelles et géométriques générales et surépaisseurs d'usinage pour les pièces moulées — Rectificatif technique 1,2009-01-14,1,['17.040.10'],ISO/TC 213,9599,,[77952],"['en','fr']",2,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8062-4:2017
- **Identifier:** ISO 8062-4:2017 _(verified: appears in the quote below)_
- **Item title:** Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8062-4:2023
- **Withdrawn / published date:** 2017-07-31 _(verified: appears in the quote below)_
> 60774,IS,,ISO 8062-4:2017,Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system,Spécification géométrique des produits (GPS) — Tolérances dimensionnelles et géométriques pour les pièces moulées — Partie 4: Tolérances générales pour les pièces moulées par tolérancement de profil dans un système général de références spécifiées,2017-07-31,1,['17.040.10'],ISO/TC 213,9599,,[77154],['en'],25," ISO 8062-4:2017 specifies general geometrical tolerances using surface profile tolerances related to a general datum system that remains on the final part. It also sp
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8067:1989
- **Identifier:** ISO 8067:1989 _(verified: appears in the quote below)_
- **Item title:** Flexible cellular polymeric materials — Determination of tear strength _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8067:2008
- **Withdrawn / published date:** 1989-10-05 _(verified: appears in the quote below)_
> 15088,IS,,ISO 8067:1989,Flexible cellular polymeric materials — Determination of tear strength,Matériaux polymères alvéolaires souples — Détermination de la résistance au déchirement,1989-10-05,1,['83.100'],ISO/TC 45/SC 4,9599,,[42716],"['en','fr']",3, Specifies a method for the determination of the tear strength of flexibility cellular polymeric materials having a thickness of more than 24.0 mm. The procedure described produces a value which may be regarded as a measure of the tear resistance of foam under the conditions of this particular test. ISO 8067:2008 specifies two methods for the determination of the tear strength of flexible cellular polymeric materials: Specifies required characteristics of mineral oils as delivered that are primarily intended for use as lubricants and control fluids for steam turbine systems requiring oils of category TSA and that may be used for gas turbines using oils of category TGA and for water turbines. These oils are not intended for service when extreme pressu
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8068:2006
- **Identifier:** ISO 8068:2006 _(verified: appears in the quote below)_
- **Item title:** Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8068:2024
- **Withdrawn / published date:** 2006-09-22 _(verified: appears in the quote below)_
> 40037,IS,,ISO 8068:2006,"Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille T (Turbines) — Spécifications pour les huiles lubrifiantes pour turbines",2006-09-22,2,['75.100'],ISO/TC 28/SC 4,9599,[15089],[85619],"['en','fr','ru']",16," ISO 8068:2006 specifies the minimum requirements for turbine lubricants, as delivered. It specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turbines, combined-cycle turbines with a common lubrication system and hydraulic (water driven) turbines.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8068:2006/Amd 1:2019
- **Identifier:** ISO 8068:2006/Amd 1:2019 _(verified: appears in the quote below)_
- **Item title:** Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines — Amendment 1: Filterability tests according to ISO 13357-1 and ISO 13357-2 — Requirements related to the stage of the test method _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8068:2024
- **Withdrawn / published date:** 2019-03-04 _(verified: appears in the quote below)_
> 75354,IS,Amd,ISO 8068:2006/Amd 1:2019,"Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines — Amendment 1: Filterability tests according to ISO 13357-1 and ISO 13357-2 — Requirements related to the stage of the test method","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille T (Turbines) — Spécifications pour les huiles lubrifiantes pour turbines — Amendement 1: Essais de filtrabilité selon les normes ISO 13357-1 et ISO 13357-2 — Exigences relatives au stade de la méthode d'essai",2019-03-04,2,['75.100'],ISO/TC 28/SC 4,9599,,[85619],"['en','fr']",5,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8069:1986
- **Identifier:** ISO 8069:1986 _(verified: appears in the quote below)_
- **Item title:** Dried milk — Determination of lactic acid and lactates content — Enzymatic method _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8069:2005
- **Withdrawn / published date:** 1986-06-05 _(verified: appears in the quote below)_
> 15090,IS,,ISO 8069:1986,Dried milk — Determination of lactic acid and lactates content — Enzymatic method,Lait sec — Determination de la teneur en acide lactique et en lactates — Méthode enzymatique,1986-06-05,1,['67.100.10'],ISO/TC 34/SC 5,9599,[8846],[36686],"['en','fr']",4, Applies to all types of dried milk. The sampling shall be made according to ISO 707. The method specified is mainly based on `Methods of enzymatic food analysis: UV-method for the determination of L-lactic acid and D-lactic acid in foodstuffs' by Boehringer Mannheim GmbH. Covers all types of dried milk. The sampling shall be made as specified in ISO 707. A table gives information as to preparating and composition of 7 different sodium and potassium reference solutions. Gives the requirements to be met. Provides practical methods for removing contaminants and for obtaining suitable corrosion resistance. The surface treatments required during manufacture are mandatory for all surfaces. The final surface treatments are mandatory except when a surface coating is specified. Specifies the requirements for parts made from martensitic, precipitation hardening and maraging stainless steels. Provides practical methods for removing contaminants and for obtaining suitable corrosion resistance for aerospace applications. The final surface treatments are mandatory except when a surface coating is specified. Specifies requirements for producing and testing a coating on aluminium alloys. The anodizing process is applied in the manufacture of aerospace products to improve paint adhesion and resistance to corrosion. Gives technical requirements, quality assurance provisions, packaging and delivery. Includes requirements for producing and testing a coating on aluminium alloys where the coating is not required to withstand prolonged exposure to weathering and direct sunlight. The anodizing process is applied in the manufacture of aerospace products to improve resistance to corrosion, produce coloured surfaces for aesthetic reasons or to colou
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8080:1985
- **Identifier:** ISO 8080:1985 _(verified: appears in the quote below)_
- **Item title:** Aerospace — Anodic treatment of titanium and titanium alloys — Sulfuric acid process _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8080:2021
- **Withdrawn / published date:** 1985-05-09 _(verified: appears in the quote below)_
> 15113,IS,,ISO 8080:1985,Aerospace — Anodic treatment of titanium and titanium alloys — Sulfuric acid process,Aéronautique et espace — Traitement anodique du titane et de ses alliages — Traitement à l'acide sulfurique,1985-05-09,1,['49.040'],ISO/TC 20/SC 18,9599,,[75445],"['en','fr']",2," Specifies the requirements for producing and testing. The coating is used with solid film lubricants for protection of titanium fasteners against galling, for limited protection of less noble metals against galvanic corrosion when in contact with titanium or for other approved uses. Gives information on technical requirements, quality assurance provisions, packaging and delivery. Describes the requirements for producing and testing. The coating specified is used in the manufacture of aerospace products in order to improve paint adhesion and resistance to corrosion. This process may also be used for touch-up of anodic coatings. Gives information on technical requirements, quality assurance provisions, packaging and delivery. Establishes a consistent, reproducible means of evaluating force-deflection characteristics of roll-over protective structures under static loading, and prescribes performance requirements for a representative specimen under such loading. Applies to mobile and self-propelled specially designed machinery for forestry as defined in ISO 6814. ISO 8082:2003 establishes a consistent, reproducible means of evaluating the force-deflection characteristics of roll-over protective structures (ROPS) on self-propelled forestry machines under static loading, and prescribes performance requirements for a representative specimen under such loading. It is applicable to forwarders, skidders,
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8083:1989
- **Identifier:** ISO 8083:1989 _(verified: appears in the quote below)_
- **Item title:** Machinery for forestry — Falling-object protective structures — Laboratory tests and performance requirements _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8083:2006
- **Withdrawn / published date:** 1989-12-21 _(verified: appears in the quote below)_
> 15116,IS,,ISO 8083:1989,Machinery for forestry — Falling-object protective structures — Laboratory tests and performance requirements,Matériel forestier — Structures de protection contre les chutes d'objets — Essais de laboratoire et critères de performance,1989-12-21,1,['65.060.80'],ISO/TC 23/SC 15,9599,,[39099],"['en','fr']",6," Establishes a consistent, repeatable means of evaluating characteristics of protective structures under loading. Applies to mobile or self-propelled specially-designed machines as defined in ISO 6814. Some figures illustrate the drop test objekt and drop test impact points. Annex A gives a standard test report; annex B contains additional information for originat
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8084:1993
- **Identifier:** ISO 8084:1993 _(verified: appears in the quote below)_
- **Item title:** Machinery for forestry — Operator protective structures — Laboratory tests and performance requirements _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8084:2003
- **Withdrawn / published date:** 1993-12-23 _(verified: appears in the quote below)_
> 15117,IS,,ISO 8084:1993,Machinery for forestry — Operator protective structures — Laboratory tests and performance requirements,Machines forestières — Structures de protection de l'opérateur — Essais de laboratoire et critères de performance,1993-12-23,1,['65.060.80'],ISO/TC 23/SC 15,9599,,[31626],"['en','fr']",3," Establishes a consistent repeatable means of evaluating characteristics of an operator protective structure under loading, and prescribes performance requirements for this structure under such loading in a representative test. Applies to mobile forestry machines and equipment defined in ISO 6814.
"
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv
## ISO 8068:1987
- **Identifier:** ISO 8068:1987 _(verified: appears in the quote below)_
- **Item title:** Petroleum products and lubricants — Petroleum lubricating oils for turbines (categories ISO-L-TSA and ISO-L-TGA) — Specifications _(verified: appears in the quote below)_
- **Status code:** 9599 _(verified: appears in the quote below)_
- **Successor:** ISO 8068:2006
- **Withdrawn / published date:** 1987-06-18 _(verified: appears in the quote below)_
> 15089,IS,,ISO 8068:1987,Petroleum products and lubricants — Petroleum lubricating oils for turbines (categories ISO-L-TSA and ISO-L-TGA) — Specifications,Produits pétroliers et lubrifiants — Huiles lubrifiantes de pétrole pour turbines (catégories ISO-L-TSA et ISO-L-TGA) — Spécifications,1987-06-18,1,['75.100'],ISO/TC 28/SC 4,9599,,[40037],"['en','fr']",4,"