Specifies the essential characteristics for household refrigerators, with or without a cellar or low-temperature compartment, lays down the methods for the checking of these characteristics. The tests described are type tests. Electrical and mechanical safety requirements are specified in IEC 335-2-24. Replaces t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7371:1995/Amd 1:1997 - **Identifier:** ISO 7371:1995/Amd 1:1997 _(verified: appears in the quote below)_ - **Item title:** Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods — Amendment 1: for the preservation of highly perishable foodstuffs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 15502:2005 - **Withdrawn / published date:** 1997-12-11 _(verified: appears in the quote below)_ > 27284,IS,Amd,ISO 7371:1995/Amd 1:1997,Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods — Amendment 1: for the preservation of highly perishable foodstuffs,Appareils de réfrigération ménagers — Réfrigérateurs ménagers avec ou sans compartiment basse température — Caractéristiques et méthodes d'essai — Amendement 1: spéciaux destinés à l'entreposage des denrées hautement périssables,1997-12-11,2,['97.040.30'],ISO/TC 86,9599,,[27428],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7372:1986 - **Identifier:** ISO 7372:1986 _(verified: appears in the quote below)_ - **Item title:** Trade data interchange — Trade data elements directory _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7372:1993 - **Withdrawn / published date:** 1986-02-27 _(verified: appears in the quote below)_ > 14063,IS,,ISO 7372:1986,Trade data interchange — Trade data elements directory,Échange de données dans le commerce — Répertoire d'éléments de données commerciales,1986-02-27,1,['01.140.30'],ISO/TC 154,9599,,[23441],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7372:1993 - **Identifier:** ISO 7372:1993 _(verified: appears in the quote below)_ - **Item title:** Trade data interchange — Trade data elements directory _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 7372 | ISO 7372:2005 - **Withdrawn / published date:** 1993-12-23 _(verified: appears in the quote below)_ > 23441,IS,,ISO 7372:1993,Trade data interchange — Trade data elements directory,Échange de données dans le commerce — Répertoire d'éléments de données commerciales,1993-12-23,2,['01.140.30'],ISO/TC 154,9599,[14063],"[34515,41237]",['en'],160,"
Describes presentation of the data elements and maintenance of the directory. The standard data elements included are intended to facilitate interchange of data in international trade. These standard data elements can be used with any method for data interchange on paper documents as well as with other means of data communication. They can be selected for transmission one by one, or used within a particular system of interchange rules, e.g. the United Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7374:1987 - **Identifier:** ISO 7374:1987 _(verified: appears in the quote below)_ - **Item title:** Photography — 110-size cartridges — Dimensions and format of film and backing paper _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13450:1996 - **Withdrawn / published date:** 1987-12-17 _(verified: appears in the quote below)_ > 14065,IS,,ISO 7374:1987,Photography — 110-size cartridges — Dimensions and format of film and backing paper,Photographie — Chargeurs de format 110 — Dimensions et présentation du film et du papier protecteur,1987-12-17,1,['37.040.20'],ISO/TC 42,9599,,[22024],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7375-1:1982 - **Identifier:** ISO 7375-1:1982 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles — Part 1: Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7375-1:1986 - **Withdrawn / published date:** 1982-02-01 _(verified: appears in the quote below)_ > 14066,IS,,ISO 7375-1:1982,Road vehicles — Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles — Part 1: Dimensions,Véhicules routiers — Tuyaux flexibles spiralés munis de leur raccord pour la liaison de freinage pneumatique entre automobiles et véhicules tractés — Partie 1: Dimensions,1982-02-01,1,['43.040.40'],ISO/TC 22,9599,,[14067],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7376-1:1984 - **Identifier:** ISO 7376-1:1984 _(verified: appears in the quote below)_ - **Item title:** Laryngoscopic fittings — Part 1: Hook-on type handle-blade fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7376-1:1994 - **Withdrawn / published date:** 1984-05-01 _(verified: appears in the quote below)_ > 14069,IS,,ISO 7376-1:1984,Laryngoscopic fittings — Part 1: Hook-on type handle-blade fittings,Éléments de laryngoscopes — Partie 1: Système manche/lame à enclenchement,1984-05-01,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[14070],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7376-1:1994 - **Identifier:** ISO 7376-1:1994 _(verified: appears in the quote below)_ - **Item title:** Laryngoscopic fittings — Part 1: Conventional hook-on type handle-blade fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 7376-1 | ISO 7376:2003 - **Withdrawn / published date:** 1994-11-17 _(verified: appears in the quote below)_ > 14070,IS,,ISO 7376-1:1994,Laryngoscopic fittings — Part 1: Conventional hook-on type handle-blade fittings,Éléments de laryngoscopes — Partie 1: Système conventionnel manche/lame à enclenchement,1994-11-17,2,['11.040.55'],ISO/TC 121/SC 2,9599,[14069],"[33425,37200]",['en'],8,"
Cancels and replaces the first edition (1984). Lays down critical dimensions and considerations for the junction of any blade and any handle of a hook-on type laryngoscope to allow engagement, lamp illumination and disengagement through multiple cycles. Does not cover: the blade form or handle design other than the interchangeability aspects of the connection between the blade and the handle; the measurement and spec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7376-2:1984 - **Identifier:** ISO 7376-2:1984 _(verified: appears in the quote below)_ - **Item title:** Laryngoscopic fittings — Part 2: Miniature electric lamps — Screw threads and sockets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7376-2:1997 - **Withdrawn / published date:** 1984-08-01 _(verified: appears in the quote below)_ > 14072,IS,,ISO 7376-2:1984,Laryngoscopic fittings — Part 2: Miniature electric lamps — Screw threads and sockets,Éléments de laryngoscopes — Partie 2: Lampes électriques miniatures — Filetages et douilles,1984-08-01,1,"['29.140.20','11.040.50']",ISO/TC 121/SC 2,9599,[14071],[14073],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7376-2:1997 - **Identifier:** ISO 7376-2:1997 _(verified: appears in the quote below)_ - **Item title:** Laryngoscopic fittings — Part 2: Miniature electric lamps — Screw threads and sockets for conventional blades _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7376:2003 - **Withdrawn / published date:** 1997-11-27 _(verified: appears in the quote below)_ > 14073,IS,,ISO 7376-2:1997,Laryngoscopic fittings — Part 2: Miniature electric lamps — Screw threads and sockets for conventional blades,Éléments de laryngoscopes — Partie 2: Lampes électriques miniatures — Filetages et douilles pour lames conventionnelles,1997-11-27,2,"['29.140.20','11.040.55']",ISO/TC 121/SC 2,9599,[14072],[37200],['en'],4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7376:2003 - **Identifier:** ISO 7376:2003 _(verified: appears in the quote below)_ - **Item title:** Anaesthetic and respiratory equipment — Laryngoscopes for tracheal intubation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7376:2009 - **Withdrawn / published date:** 2003-12-05 _(verified: appears in the quote below)_ > 37200,IS,,ISO 7376:2003,Anaesthetic and respiratory equipment — Laryngoscopes for tracheal intubation,Matériel d'anesthésie et de réanimation respiratoire — Laryngoscopes pour intubation trachéale,2003-12-05,1,['11.040.55'],ISO/TC 121/SC 2,9599,"[14070,14074,14073]",[44073],"['en','fr']",15,"
ISO 7376:2003 specifies general requirements for laryngoscopes and critical dimensions for the handle and lamp of hook-on type laryngoscopes.
It is applicable only to instruments with an electrical power source for illuminating the larynx, since electrical safety requirements may be more stringent for instruments connected to mains or external power packs.
ISO 7376:2003 is not applicable Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7376:2009 - **Identifier:** ISO 7376:2009 _(verified: appears in the quote below)_ - **Item title:** Anaesthetic and respiratory equipment — Laryngoscopes for tracheal intubation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7376:2020 - **Withdrawn / published date:** 2009-07-31 _(verified: appears in the quote below)_ > 44073,IS,,ISO 7376:2009,Anaesthetic and respiratory equipment — Laryngoscopes for tracheal intubation,Matériel d'anesthésie et de réanimation respiratoire — Laryngoscopes pour intubation trachéale,2009-07-31,2,['11.040.10'],ISO/TC 121/SC 2,9599,[37200],[71539],"['en','fr']",27,"
ISO 7376:2009 gives general requirements for laryngoscopes used for intubation, and specifies critical dimensions for the handle and lamp of hook-on type laryngoscopes. It also addresses the interchangeability of blades and handles.
It is applicable only to instruments with an internal battery-operated power source for illuminating the larynx, since electrical safety requirements can be more stringent for ins Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7376-3:1996 - **Identifier:** ISO 7376-3:1996 _(verified: appears in the quote below)_ - **Item title:** Laryngoscopic fittings — Part 3: Fibre-illuminated re-usable rigid laryngoscopes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7376:2003 - **Withdrawn / published date:** 1996-12-26 _(verified: appears in the quote below)_ > 14074,IS,,ISO 7376-3:1996,Laryngoscopic fittings — Part 3: Fibre-illuminated re-usable rigid laryngoscopes,"Éléments de laryngoscopes — Partie 3: Laryngoscopes à fibres optiques rigides, réutilisables",1996-12-26,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[37200],"['en','fr']",10,"
Gives basic dimensions and performance requirements for two designs of re-usable rigid laryngoscopes, in which light from a source in the handle is transmitted to the blade by means of illuminating fibres.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 738:1981 - **Identifier:** ISO 738:1981 _(verified: appears in the quote below)_ - **Item title:** Coniferous sawn timber — Sizes — Permissible deviations and shrinkage _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 738:2015 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 4988,IS,,ISO 738:1981,Coniferous sawn timber — Sizes — Permissible deviations and shrinkage,Bois sciés résineux — Dimensions — Écarts admissibles et retrait,1981-11-01,1,['79.040'],ISO/TC 218,9599,,[62870],"['en','fr']",3,"Relates to deviations from nominal thicknesses, widths and lengths due to inaccuracies in sawing. Is applicable to unplaned square-edged and unedged sawn timber having thicknesses or widths in the range of 10 mm to 310 mm. Average values for shrinkage for some wood species are given in annexes A and B.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7380-1:2011 - **Identifier:** ISO 7380-1:2011 _(verified: appears in the quote below)_ - **Item title:** Button head screws — Part 1: Hexagon socket button head screws _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7380-1:2022 - **Withdrawn / published date:** 2011-07-28 _(verified: appears in the quote below)_ > 53671,IS,,ISO 7380-1:2011,Button head screws — Part 1: Hexagon socket button head screws,Vis à tête cylindrique bombée plate — Partie 1: Vis à tête cylindrique bombée plate à six pans creux,2011-07-28,1,['21.060.10'],ISO/TC 2/SC 11,9599,[34453],[78699],"['en','fr']",7,"ISO 7380-1:2011 specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7380:1983 - **Identifier:** ISO 7380:1983 _(verified: appears in the quote below)_ - **Item title:** Hexagon socket button head screws — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7380:1997 - **Withdrawn / published date:** 1983-09-01 _(verified: appears in the quote below)_ > 14080,IS,,ISO 7380:1983,Hexagon socket button head screws — Metric series,"Vis à métaux, à tête cylindrique bombée plate à six pans creux — Série métrique",1983-09-01,1,['21.060.10'],ISO/TC 2,9599,,[14081],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7380:1997 - **Identifier:** ISO 7380:1997 _(verified: appears in the quote below)_ - **Item title:** Hexagon socket button head screws _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7380:2004 - **Withdrawn / published date:** 1997-11-13 _(verified: appears in the quote below)_ > 14081,IS,,ISO 7380:1997,Hexagon socket button head screws,"Vis à métaux, à tête cylindrique bombée plate à six pans creux",1997-11-13,2,['21.060.10'],ISO/TC 2,9599,[14080],[34453],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7380-2:2011 - **Identifier:** ISO 7380-2:2011 _(verified: appears in the quote below)_ - **Item title:** Button head screws — Part 2: Hexagon socket button head screws with collar _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7380-2:2022 - **Withdrawn / published date:** 2011-07-28 _(verified: appears in the quote below)_ > 53672,IS,,ISO 7380-2:2011,Button head screws — Part 2: Hexagon socket button head screws with collar,Vis à tête cylindrique bombée plate — Partie 2: Vis à tête cylindrique bombée plate à six pans creux à embase plate,2011-07-28,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[78700],"['en','fr']",7,"ISO 7380-2:2011 specifies the characteristics of hexagon socket button head screws with collar with threads from M3 up to and including M16, with product grade A and with reduced loadability.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7380:2004 - **Identifier:** ISO 7380:2004 _(verified: appears in the quote below)_ - **Item title:** Hexagon socket button head screws _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7380-1:2011 - **Withdrawn / published date:** 2004-01-07 _(verified: appears in the quote below)_ > 34453,IS,,ISO 7380:2004,Hexagon socket button head screws,Vis à tête cylindrique bombée plate à six pans creux,2004-01-07,3,['21.060.10'],ISO/TC 2/SC 11,9599,[14081],[53671],"['en','fr']",4,"ISO 7380:2004 specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7382:1986 - **Identifier:** ISO 7382:1986 _(verified: appears in the quote below)_ - **Item title:** Ethylene for industrial use — Sampling in the liquid and the gaseous phase _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7382:2023 - **Withdrawn / published date:** 1986-09-25 _(verified: appears in the quote below)_ > 14083,IS,,ISO 7382:1986,Ethylene for industrial use — Sampling in the liquid and the gaseous phase,Éthylène à usage industriel — Échantillonnage en phase liquide et en phase gazeuse,1986-09-25,1,['71.080.10'],ISO/TC 47,9599,,[82800],"['en','fr']",6,"Describes the procedure and the precautions to be taken in drawing representative samples of ethylene in the liquid phase stored at -100 °C and in the gaseous phase, for the purpose of their analysis excluding the determination of water content, other polar components and hydrocarbons heavier than C5. In an annex a diagrammatic representation is given of a system for the removal of the portion of the sample not used in the analysis. Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7385:1983 - **Identifier:** ISO 7385:1983 _(verified: appears in the quote below)_ - **Item title:** Nuclear power plants — Guidelines to ensure quality of collected data on reliability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 7385 - **Withdrawn / published date:** 1983-08-01 _(verified: appears in the quote below)_ > 14086,IS,,ISO 7385:1983,Nuclear power plants — Guidelines to ensure quality of collected data on reliability,Centrales nucléaires — Principes directeurs pour assurer la qualité des données de fiabilité recueillies,1983-08-01,1,['27.120.20'],ISO/TC 85/SC 6,9599,,[81449],"['en','fr']",3,"
The output of a data collection system is strongly dependent on the quality of the information collected. Before starting such a system, it is necessary to clearly define the following items: the overall goal, the suppliers of field data, the users of processed data, the terms and expressions used, the means used to collect data and to treat them, the questions to be answered by field data, field data neede Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7388-1:1983 - **Identifier:** ISO 7388-1:1983 _(verified: appears in the quote below)_ - **Item title:** Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7388-1:2007 - **Withdrawn / published date:** 1983-12-01 _(verified: appears in the quote below)_ > 14092,IS,,ISO 7388-1:1983,"Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions","Queues d'outils à conicité 7/24 pour changement automatique d'outils — Partie 1: Cônes nos 40, 45 et 50 — Dimensions",1983-12-01,1,['25.060.20'],ISO/TC 29/SC 9,9599,,[44098],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7388-1:1983/Add 1:1984 - **Identifier:** ISO 7388-1:1983/Add 1:1984 _(verified: appears in the quote below)_ - **Item title:** Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7388-1:2007 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 14093,IS,Add,ISO 7388-1:1983/Add 1:1984,"Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances","Queues d'outils à conicité 7/24 pour changement automatique d'outils — Partie 1: Cônes nos 40, 45 et 50 — Dimensions — Additif 1: Tolérances de conicité",1984-12-01,1,['25.060.20'],ISO/TC 29,9599,,[44098],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7388-2:1984 - **Identifier:** ISO 7388-2:1984 _(verified: appears in the quote below)_ - **Item title:** Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7388-2:2007 - **Withdrawn / published date:** 1984-07-01 _(verified: appears in the quote below)_ > 14094,IS,,ISO 7388-2:1984,"Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics","Queues d'outils à conicité 7/24 pour changement automatique d'outils — Partie 2: Embouts de tirage pour cônes nos. 40, 45 et 50 — Dimensions et caractéristiques mécaniques",1984-07-01,1,['25.060.20'],ISO/TC 29/SC 9,9599,,[44099],"['en','fr']",4,
Applies for feeding tools from the magazine to the spindle and vice-versa. The retention knobs are intended for the mounting of the tools in the spindles. ISO 7388-2 lays down retention knobs in type A and in type B.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7388-3:2007 - **Identifier:** ISO 7388-3:2007 _(verified: appears in the quote below)_ - **Item title:** Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7388-3:2013 - **Withdrawn / published date:** 2007-07-30 _(verified: appears in the quote below)_ > 34062,IS,,ISO 7388-3:2007,"Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF","Queues d'outils à conicité 7/24 pour changement automatique d'outils — Partie 3: Tirettes pour queues de formes AC, AD, AF, UC, UD, UF, JD et JF",2007-07-30,1,['25.060.20'],ISO/TC 29/SC 9,9599,,[60403],"['en','fr']",9,"ISO 7388-3:2007 specifies the dimensions of retention knobs for tool shanks with a 7/24 taper of shank forms A, AD, AF, UC, UD, UF, JD and JF, for automatic tool changers, used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are desig Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7388-3:2013 - **Identifier:** ISO 7388-3:2013 _(verified: appears in the quote below)_ - **Item title:** Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7388-3:2016 - **Withdrawn / published date:** 2013-10-16 _(verified: appears in the quote below)_ > 60403,IS,,ISO 7388-3:2013,"Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF","Queues d'outils à conicité 7/24 pour changement automatique d'outils — Partie 3: Tirettes pour queues de formes AC, AD, AF, UC, UD, UF, JD et JF",2013-10-16,2,['25.060.20'],ISO/TC 29,9599,[34062],[68845],"['en','fr']",9,"
ISO 7388-3:2013 specifies the dimensions of retention knobs for tool shanks with a 7/24 taper of shank forms A, AD, AF, UC, UD, UF, JD, and JF for automatic tool changers used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are desi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7389:1982 - **Identifier:** ISO 7389:1982 _(verified: appears in the quote below)_ - **Item title:** Building construction — Jointing products — Determination of elastic recovery _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7389:1987 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 14097,IS,,ISO 7389:1982,Building construction — Jointing products — Determination of elastic recovery,Construction immobilière — Produits pour joints — Détermination de la reprise élastique,1982-12-01,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[14098],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7389:1987 - **Identifier:** ISO 7389:1987 _(verified: appears in the quote below)_ - **Item title:** Building construction — Jointing products — Determination of elastic recovery _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7389:2002 - **Withdrawn / published date:** 1987-11-05 _(verified: appears in the quote below)_ > 14098,IS,,ISO 7389:1987,Building construction — Jointing products — Determination of elastic recovery,Construction immobilière — Produits pour joints — Détermination de la reprise élastique,1987-11-05,2,['91.100.50'],ISO/TC 59/SC 8,9599,[14097],[33677],"['en','fr']",3,"
Specifies a conventional method for the determination of the elastic recovery of sealants after extension and applies to sealants used in joints in building construction. Contains test method (preparation and conditioning of test specimen, procedure), expression of results, and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7390:1982 - **Identifier:** ISO 7390:1982 _(verified: appears in the quote below)_ - **Item title:** Building construction — Jointing products — Determination of resistance to flow _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7390:1987 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 14099,IS,,ISO 7390:1982,Building construction — Jointing products — Determination of resistance to flow,Construction immobilière — Produits pour joints — Détermination de la résistance au coulage,1982-12-01,1,['91.100.50'],ISO/TC 59,9599,,[14100],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7390:1987 - **Identifier:** ISO 7390:1987 _(verified: appears in the quote below)_ - **Item title:** Building construction — Jointing products — Determination of resistance to flow _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7390:2002 - **Withdrawn / published date:** 1987-11-26 _(verified: appears in the quote below)_ > 14100,IS,,ISO 7390:1987,Building construction — Jointing products — Determination of resistance to flow,Construction immobilière — Produits pour joints — Détermination de la résistance au coulage,1987-11-26,2,['91.100.50'],ISO/TC 59/SC 8,9599,[14099],[33678],"['en','fr']",2,"Specifies a method for the determination of resistance to flow of sealants to be used in joints of vertical surfaces of building construction. Describes test method (principle, apparatus, preparation of test specimens, procedure) and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7391-1:1987 - **Identifier:** ISO 7391-1:1987 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polycarbonate moulding and extrusion materials — Part 1: Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7391-1:1996 - **Withdrawn / published date:** 1987-06-25 _(verified: appears in the quote below)_ > 14101,IS,,ISO 7391-1:1987,Plastics — Polycarbonate moulding and extrusion materials — Part 1: Designation,Plastiques — Matériaux polycarbonates pour moulage et extrusion — Partie 1: Désignation,1987-06-25,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[25181],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7391-1:1996 - **Identifier:** ISO 7391-1:1996 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7391-1:2006 - **Withdrawn / published date:** 1996-11-21 _(verified: appears in the quote below)_ > 25181,IS,,ISO 7391-1:1996,Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polycarbonate (PC) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1996-11-21,2,['83.080.20'],ISO/TC 61/SC 9,9599,[14101],[36275],"['en','fr']",7,"Establishes a system of designation for polycarbonate thermoplastic material. The polycarbonate plastics are differentiated from each other by a classification system based on designatory properties such as viscosity number, melt flow rate, Charpy impact strength and on information about the intended application and/or method of processing. Applies t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7391-1:2006 - **Identifier:** ISO 7391-1:2006 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21305-1:2019 - **Withdrawn / published date:** 2006-03-02 _(verified: appears in the quote below)_ > 36275,IS,,ISO 7391-1:2006,Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polycarbonate (PC) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2006-03-02,3,['83.080.20'],ISO/TC 61/SC 9,9599,[25181],[70507],"['en','fr']",7,"
ISO 7391-1:2006 establishes a system of designation for polycarbonate thermoplastic material, which may be used as the basis for specifications.
The types of polycarbonate plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties
Specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polycarbonate moulding and extrusion materials. Requirements for handling the material and conditioning are given.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7391-2:2006 - **Identifier:** ISO 7391-2:2006 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21305-2:2019 - **Withdrawn / published date:** 2006-03-02 _(verified: appears in the quote below)_ > 36276,IS,,ISO 7391-2:2006,Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polycarbonate (PC) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2006-03-02,3,['83.080.20'],ISO/TC 61/SC 9,9599,[25182],[70508],"['en','fr']",6,"ISO 7391-2:2006 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polycarbonate moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7393-2:1985 - **Identifier:** ISO 7393-2:1985 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of free chlorine and total chlorine — Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7393-2:2017 - **Withdrawn / published date:** 1985-10-24 _(verified: appears in the quote below)_ > 14106,IS,,ISO 7393-2:1985,"Water quality — Determination of free chlorine and total chlorine — Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes","Qualité de l'eau — Dosage du chlore libre et du chlore total — Partie 2: Méthode colorimétrique à la N,N-diéthylphénylène-1,4 diamine destinée aux contrôles de routine",1985-10-24,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[65560],"['en','fr']",8,"
Specifies a procedure for water, readily applicable to field testing; it is based on measurement of the colour intensity by visual comparison of the colour with a scale of standards which is regularly calibrated. Sea water and waters containing bromides and io Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7393-3:1986 - **Identifier:** ISO 7393-3:1986 _(verified: appears in the quote below)_ - **Item title:** Water quality — Determination of free chlorine and total chlorine — Part 3: Iodometric titration method for the determination of total chlorine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7393-3:1990 - **Withdrawn / published date:** 1986-12-18 _(verified: appears in the quote below)_ > 14107,IS,,ISO 7393-3:1986,Water quality — Determination of free chlorine and total chlorine — Part 3: Iodometric titration method for the determination of total chlorine,Qualité de l'eau — Dosage du chlore libre et du chlore total — Partie 3: Méthode par titrage iodométrique pour le dosage du chlore total,1986-12-18,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[14108],"['en','fr']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7396-1:2002 - **Identifier:** ISO 7396-1:2002 _(verified: appears in the quote below)_ - **Item title:** Medical gas pipeline systems — Part 1: Pipelines for compressed medical gases and vacuum _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7396-1:2007 - **Withdrawn / published date:** 2002-08-29 _(verified: appears in the quote below)_ > 25795,IS,,ISO 7396-1:2002,Medical gas pipeline systems — Part 1: Pipelines for compressed medical gases and vacuum,Réseaux de distribution de gaz médicaux — Partie 1: Réseaux de distribution de gaz médicaux comprimés et de vide,2002-08-29,1,['11.040.10'],ISO/TC 121/SC 6,9599,[14111],[40440],['en'],104,"
ISO 7396-1 specifies requirements for design, installation, function, performance, documentation, testing and commissioning of compressed medical gas and vacuum pipeline systems in health care facilities to ensure continuous delivery of the correct gas from the pipeline system. It includes requirements for supply systems, pipeline distribution systems, control systems, monitoring and alarm Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7396-1:2007 - **Identifier:** ISO 7396-1:2007 _(verified: appears in the quote below)_ - **Item title:** Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7396-1:2016 - **Withdrawn / published date:** 2007-03-28 _(verified: appears in the quote below)_ > 40440,IS,,ISO 7396-1:2007,Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum,Systèmes de distribution de gaz médicaux — Partie 1: Systèmes de distribution de gaz médicaux comprimés et de vide,2007-03-28,2,['11.040.10'],ISO/TC 121/SC 6,9599,[25795],[60061],"['en','fr','ru']",141,"
ISO 7396-1:2007 specifies requirements for design, installation, function, performance, documentation, testing and commissioning of pipeline systems for compressed medical gases, gases for driving surgical tools and vacuum in healthcare facilities to ensure continuous delivery of the correct gas and the provision of vacuum from the pipeline system. It includes requireme Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7396-1:2007/Amd 1:2010 - **Identifier:** ISO 7396-1:2007/Amd 1:2010 _(verified: appears in the quote below)_ - **Item title:** Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7396-1:2016 - **Withdrawn / published date:** 2010-01-04 _(verified: appears in the quote below)_ > 50924,IS,Amd,ISO 7396-1:2007/Amd 1:2010,Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses,Systèmes de distribution de gaz médicaux — Partie 1: Systèmes de distribution de gaz médicaux comprimés et de vide — Amendement 1: Exigences relatives aux prises murales pour le vide montées sur des gaines techniques médicales munies de sections réglables par l'opérateur et raccordées aux canalisations par des flexibles,2010-01-04,2,['11.040.10'],ISO/TC 121/SC 6,9599,,[60061],"['en','f Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7396-1:2007/Amd 2:2010 - **Identifier:** ISO 7396-1:2007/Amd 2:2010 _(verified: appears in the quote below)_ - **Item title:** Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7396-1:2016 - **Withdrawn / published date:** 2010-01-22 _(verified: appears in the quote below)_ > 52212,IS,Amd,ISO 7396-1:2007/Amd 2:2010,Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 2,Systèmes de distribution de gaz médicaux — Partie 1: Systèmes de distribution de gaz médicaux comprimés et de vide — Amendement 2,2010-01-22,2,['11.040.10'],ISO/TC 121/SC 6,9599,,[60061],"['en','fr','ru']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7396-1:2007/Amd 3:2013 - **Identifier:** ISO 7396-1:2007/Amd 3:2013 _(verified: appears in the quote below)_ - **Item title:** Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 3: Terminology relating to alarm systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7396-1:2016 - **Withdrawn / published date:** 2013-02-28 _(verified: appears in the quote below)_ > 57986,IS,Amd,ISO 7396-1:2007/Amd 3:2013,Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 3: Terminology relating to alarm systems,Systèmes de distribution de gaz médicaux — Partie 1: Systèmes de distribution de gaz médicaux comprimés et de vide — Amendement 3: Terminologie relative aux systèmes d'alarme,2013-02-28,2,['11.040.10'],ISO/TC 121/SC 6,9599,,[60061],"['en','fr','ru']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7396:1987 - **Identifier:** ISO 7396:1987 _(verified: appears in the quote below)_ - **Item title:** Non-flammable medical gas pipeline systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7396-1:2002 | ISO 7396-2:2000 - **Withdrawn / published date:** 1987-06-04 _(verified: appears in the quote below)_ > 14111,IS,,ISO 7396:1987,Non-flammable medical gas pipeline systems,Réseaux de distribution de gaz médicaux non inflammables,1987-06-04,1,['11.040.10'],ISO/TC 121/SC 6,9599,,"[25795,25796]","['en','fr']",39,"
Specification of minimum requirements for the installation, construction, function, documentation and testing of these systems to ensure patient safety. The requirements are included which relate to the source of supply, distribution system, terminal units, warning systems and non- interchangeability between key components and service outlets. The standard applies only for the medical gases oxygen, nitrous oxide, medical air, nitrogen, helium, carbon dioxide, specified mixtures of gase Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7396-2:2000 - **Identifier:** ISO 7396-2:2000 _(verified: appears in the quote below)_ - **Item title:** Medical gas pipeline systems — Part 2: Anaesthetic gas scavenging disposal systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7396-2:2007 - **Withdrawn / published date:** 2000-11-16 _(verified: appears in the quote below)_ > 25796,IS,,ISO 7396-2:2000,Medical gas pipeline systems — Part 2: Anaesthetic gas scavenging disposal systems,Réseaux de distribution de gaz médicaux — Partie 2: Systèmes d'évacuation de gaz d'anesthésie non réutilisables,2000-11-16,1,['11.040.10'],ISO/TC 121/SC 6,9599,[14111],[41945],['en'],36, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7398:1984 - **Identifier:** ISO 7398:1984 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Motorcycles — D.C. flasher units _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7398:1990 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 14115,IS,,ISO 7398:1984,Road vehicles — Motorcycles — D.C. flasher units,Véhicules routiers — Motocycles — Centrales clignotantes en courant continu,1984-10-01,1,['43.140'],ISO/TC 22,9599,,[14116],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7399:1984 - **Identifier:** ISO 7399:1984 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Motorcycles — A.C. flasher units _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7399:1990 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 14117,IS,,ISO 7399:1984,Road vehicles — Motorcycles — A.C. flasher units,Véhicules routiers — Motocycles — Centrales clignotantes en courant alternatif,1984-10-01,1,['43.140'],ISO/TC 22,9599,,[14118],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7400:1984 - **Identifier:** ISO 7400:1984 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Mopeds — A.C. flasher units _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7400:1990 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 14119,IS,,ISO 7400:1984,Road vehicles — Mopeds — A.C. flasher units,Véhicules routiers — Cyclomoteurs — Centrales clignotantes en courant alternatif,1984-10-01,1,['43.140'],ISO/TC 22,9599,,[14120],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7401:1988 - **Identifier:** ISO 7401:1988 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Lateral transient response test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7401:2003 - **Withdrawn / published date:** 1988-04-28 _(verified: appears in the quote below)_ > 14121,IS,,ISO 7401:1988,Road vehicles — Lateral transient response test methods,Véhicules routiers — Méthodes d'essai en régime transitoire sous accélération latérale,1988-04-28,1,['43.020'],ISO/TC 22,9599,,[36998],"['en','fr']",16,
Specifies test methods to determine transient response behaviour. Applies to passenger cars as defined in ISO 3833. The measurement of steady-state properties is defined in ISO 4138. Annex A contains general data presentation; annex B gives the presentation of results. Some figures show diagrams to be reported.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7401:2003 - **Identifier:** ISO 7401:2003 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Lateral transient response test methods — Open-loop test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7401:2011 - **Withdrawn / published date:** 2003-02-24 _(verified: appears in the quote below)_ > 36998,IS,,ISO 7401:2003,Road vehicles — Lateral transient response test methods — Open-loop test methods,Véhicules routiers — Méthodes d'essai de réponse transitoire latérale — Méthodes d'essai en boucle ouverte,2003-02-24,2,['43.020'],ISO/TC 22,9599,[14121],[54144],"['en','fr']",25,"ISO 7401:2003 specifies open-loop test methods for determining the transient response behaviour of road vehicles. It is applicable to passenger cars, as defined in ISO 3833, and to light trucks.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7402:1985 - **Identifier:** ISO 7402:1985 _(verified: appears in the quote below)_ - **Item title:** Microbiology — General guidance for the enumeration of enterobacteriaceae without resuscitation — MPN technique and colony count technique _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7402:1993 - **Withdrawn / published date:** 1985-10-24 _(verified: appears in the quote below)_ > 14122,IS,,ISO 7402:1985,Microbiology — General guidance for the enumeration of enterobacteriaceae without resuscitation — MPN technique and colony count technique,Microbiologie — Directives générales pour le dénombrement sans revivification des Enterobacteriaceae — Technique NPP et méthode par comptage des colonies,1985-10-24,1,['07.100'],ISO/TC 34/SC 9,9599,,[14123],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7402:1993 - **Identifier:** ISO 7402:1993 _(verified: appears in the quote below)_ - **Item title:** Microbiology — General guidance for the enumeration of Enterobacteriaceae without resuscitation — MPN technique and colony-count technique _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21528-2:2004 | ISO/WD 7402 | ISO 21528-1:2004 - **Withdrawn / published date:** 1993-09-16 _(verified: appears in the quote below)_ > 14123,IS,,ISO 7402:1993,Microbiology — General guidance for the enumeration of Enterobacteriaceae without resuscitation — MPN technique and colony-count technique,Microbiologie — Directives générales pour le dénombrement sans revivification des Enterobacteriaceae — Technique NPP et méthode par comptage des colonies,1993-09-16,2,['07.100.01'],ISO/TC 34/SC 9,9599,[14122],"[34566,31242,34565]","['en','fr']",10,"Gives general guidance for the enumeration of Enterobacteriaceae present in products intended for human consumption or animal feeding stuffs: 1) by calculation of the most probable number after incubation at 35 °C or 37 °C in liquid medium (MPN technique), or 2) by counting colonies i Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7403:1983 - **Identifier:** ISO 7403:1983 _(verified: appears in the quote below)_ - **Item title:** Fasteners for aerospace construction — Spline drive wrenching configuration — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7403:1998 - **Withdrawn / published date:** 1983-08-01 _(verified: appears in the quote below)_ > 14124,IS,,ISO 7403:1983,Fasteners for aerospace construction — Spline drive wrenching configuration — Metric series,Éléments de fixation pour les constructions aérospatiales — Entraînement cannelé — Série métrique,1983-08-01,1,['49.030.01'],ISO/TC 20/SC 4,9599,,[27754],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-1:1984 - **Identifier:** ISO 7404-1:1984 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of bituminous coal and anthracite — Part 1: Glossary of terms _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7404-1:1994 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 14125,IS,,ISO 7404-1:1984,Methods for the petrographic analysis of bituminous coal and anthracite — Part 1: Glossary of terms,Méthodes d'analyse pétrographique des charbons bitumineux et de l'anthracite — Partie 1: Glossaire de termes,1984-10-01,1,"['73.040','01.040.73']",ISO/TC 27,9599,,[14126],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-1:1994 - **Identifier:** ISO 7404-1:1994 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of bituminous coal and anthracite — Part 1: Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 7404-1 | ISO 7404-1:2016 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 14126,IS,,ISO 7404-1:1994,Methods for the petrographic analysis of bituminous coal and anthracite — Part 1: Vocabulary,Méthodes d'analyse pétrographique des charbons bitumineux et de l'anthracite — Partie 1: Vocabulaire,1994-09-29,2,"['73.040','01.040.73']",ISO/TC 27/SC 5,9599,[14125],"[42830,67682]",['en'],4,"
Cancels and replaces the first edition (1984). Defines terms that are used in connection both with maceral and microlithotype analyses carried out in white light and with the determination of the reflectance of vitrinite. Applies to the terms used in examination of bituminous coal and anthracite only. Not concerned with the analysis of brown coal, sub-bituminous coal or lignite.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-1:2016 - **Identifier:** ISO 7404-1:2016 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of coals — Part 1: Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7404-1:2025 - **Withdrawn / published date:** 2016-03-23 _(verified: appears in the quote below)_ > 67682,IS,,ISO 7404-1:2016,Methods for the petrographic analysis of coals — Part 1: Vocabulary,Méthodes d'analyse pétrographique des charbons — Partie 1: Vocabulaire,2016-03-23,3,"['73.040','01.040.73']",ISO/TC 27/SC 5,9599,[14126],[87000],['en'],6,"ISO 7404-1:2016 defines terms that are used in connection with both maceral and microlithotype analyses, and with the determination of the reflectance of vitrinite. It applies to the terms used in the examination of coal of all ranks.
ISO 7404-1:2016 is not intended to be a comprehensive glossary of coal petrographic terminology, nor does it attempt to provide sufficient information to allow recognition of all the coal components describe Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-2:1985 - **Identifier:** ISO 7404-2:1985 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of bituminous coal and anthracite — Part 2: Preparation of coal samples _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7404-2:2009 - **Withdrawn / published date:** 1985-05-02 _(verified: appears in the quote below)_ > 14127,IS,,ISO 7404-2:1985,Methods for the petrographic analysis of bituminous coal and anthracite — Part 2: Preparation of coal samples,Méthodes d'analyse pétrographique des charbons bitumineux et de l'anthracite — Partie 2: Préparation d'échantillons de charbon,1985-05-02,1,['73.040'],ISO/TC 27,9599,,[42798],"['en','fr']",8,"
This part of ISO 7404 specifies a method for preparing a polished particulate block from a sample od crushed coal, for analysis by reflectance microscopy using white ligth. It does not apply to the preparation of polished particulate blocks for analysis using fluorescence microscopy techniques nor to the preparation of polished orientated lumps of coal.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-2:2009 - **Identifier:** ISO 7404-2:2009 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of coals — Part 2: Methods of preparing coal samples _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 7404-2 | ISO 7404-2:2025 - **Withdrawn / published date:** 2009-09-24 _(verified: appears in the quote below)_ > 42798,IS,,ISO 7404-2:2009,Methods for the petrographic analysis of coals — Part 2: Methods of preparing coal samples,Méthodes d'analyse pétrographique des charbons — Partie 2: Préparation des échantillons de charbon,2009-09-24,2,['73.040'],ISO/TC 27/SC 5,9599,[14127],"[83415,87001]",['en'],12,"ISO 7404-2:2009 specifies methods for preparing a polished particulate block from a sample of crushed coal for analysis by reflectance microscopy. These methods can also be applied to the preparation of a polished, embedded lump of coal.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-3:1984 - **Identifier:** ISO 7404-3:1984 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of bituminous coal and anthracite — Part 3: Method of determining maceral group composition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7404-3:1994 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 14128,IS,,ISO 7404-3:1984,Methods for the petrographic analysis of bituminous coal and anthracite — Part 3: Method of determining maceral group composition,Méthodes d'analyse pétrographique des charbons bitumineux et de l'anthracite — Partie 3: Détermination de la composition en groupes de macéraux,1984-11-01,1,['73.040'],ISO/TC 27,9599,,[14129],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-3:1994 - **Identifier:** ISO 7404-3:1994 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of bituminous coal and anthracite — Part 3: Method of determining maceral group composition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7404-3:2009 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 14129,IS,,ISO 7404-3:1994,Methods for the petrographic analysis of bituminous coal and anthracite — Part 3: Method of determining maceral group composition,Méthodes d'analyse pétrographique des charbons bitumineux et de l'anthracite — Partie 3: Détermination de la composition en groupes de macéraux,1994-09-29,2,['73.040'],ISO/TC 27/SC 5,9599,[14128],[42831],['en'],6,Cancels and replaces the first edition (1984). Specifies a method of determining the proportions of the maceral groups (and the minerals if desired) in coals. Concerned only with determinations made on polished particulate blocks using reflected white light. Not concerned with the determination of the proportions of naturally Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-3:2009 - **Identifier:** ISO 7404-3:2009 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of coals — Part 3: Method of determining maceral group composition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 7404-3 | ISO 7404-3:2025 - **Withdrawn / published date:** 2009-09-24 _(verified: appears in the quote below)_ > 42831,IS,,ISO 7404-3:2009,Methods for the petrographic analysis of coals — Part 3: Method of determining maceral group composition,Méthodes d'analyse pétrographique des charbons — Partie 3: Détermination de la composition en groupes de macéraux,2009-09-24,3,['73.040'],ISO/TC 27/SC 5,9599,[14129],"[83416,87002]",['en'],7,"
ISO 7404-3:2009 specifies a method for determining the proportions of the maceral groups (and the minerals, if desired) in coals. ISO 7404-3:2009 is applicable only to determinations made on polished particulate blocks using incident white light. For lower-rank coals, the additional use of the fluorescence mode is necessary to identify liptinites.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-4:1988 - **Identifier:** ISO 7404-4:1988 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of bituminous coal and anthracite — Part 4: Method of determining microlithotype, carbominerite and minerite composition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 7404-4 | ISO 7404-4:2017 - **Withdrawn / published date:** 1988-12-29 _(verified: appears in the quote below)_ > 14130,IS,,ISO 7404-4:1988,"Methods for the petrographic analysis of bituminous coal and anthracite — Part 4: Method of determining microlithotype, carbominerite and minerite composition","Méthodes d'analyse pétrographique des charbons bitumineux et de l'anthracite — Partie 4: Détermination de la composition en microlithotypes, carbominérites et minérites",1988-12-29,1,['73.040'],ISO/TC 27/SC 5,9599,,"[42803,69224]","['en','fr']",6,This part of ISO 7404 applies only to determinations made on polished particular blocks using reflected white ligth. The examination is carried out by using reflected ligth microscope and point count procedure. The microlithotypes are identified from their macer Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-4:2017 - **Identifier:** ISO 7404-4:2017 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of coals — Part 4: Method of determining microlithotype, carbominerite and minerite composition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7404-4:2025 - **Withdrawn / published date:** 2017-08-09 _(verified: appears in the quote below)_ > 69224,IS,,ISO 7404-4:2017,"Methods for the petrographic analysis of coals — Part 4: Method of determining microlithotype, carbominerite and minerite composition","Méthodes d'analyse pétrographique des charbons — Partie 4: Détermination de la composition en microlithotypes, carbominérites et minérites",2017-08-09,2,['73.040'],ISO/TC 27/SC 5,9599,[14130],[87003],['en'],9,"
ISO 7404-4:2017 specifies a method, using a graticule with 20 crossline intersections, for determining the proportions of microlithotypes, carbominerite and minerite in coals. It applies only to determinations made on polished particulate blocks using reflected white light (about 400 nm to 700 nm). Additional blue, blue-vi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-5:1984 - **Identifier:** ISO 7404-5:1984 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of bituminous coal and anthracite — Part 5: Method of determining microscopically the reflectance of vitrinite _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7404-5:1994 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 14131,IS,,ISO 7404-5:1984,Methods for the petrographic analysis of bituminous coal and anthracite — Part 5: Method of determining microscopically the reflectance of vitrinite,Méthodes d'analyse pétrographique des charbons bitumineux et de l'anthracite — Partie 5: Détermination au microscope du pouvoir réflecteur de la vitrinite,1984-11-01,1,['73.040'],ISO/TC 27,9599,,[14132],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-5:1994 - **Identifier:** ISO 7404-5:1994 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of bituminous coal and anthracite — Part 5: Method of determining microscopically the reflectance of vitrinite _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7404-5:2009 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 14132,IS,,ISO 7404-5:1994,Methods for the petrographic analysis of bituminous coal and anthracite — Part 5: Method of determining microscopically the reflectance of vitrinite,Méthodes d'analyse pétrographique des charbons bitumineux et de l'anthracite — Partie 5: Détermination au microscope du pouvoir réflecteur de la vitrinite,1994-09-29,2,['73.040'],ISO/TC 27/SC 5,9599,[14131],[42832],['en'],12,
Cancels and replaces the first edition (1984). Specifies the method for determining microscopically the maximum and random reflectance in oil of polished surfaces of the vitrinite component of coals. Applicable to either coals from single seams or coal blends covering the whole range of bituminou Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7404-5:2009 - **Identifier:** ISO 7404-5:2009 _(verified: appears in the quote below)_ - **Item title:** Methods for the petrographic analysis of coals — Part 5: Method of determining microscopically the reflectance of vitrinite _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 7404-5 | ISO 7404-5:2025 - **Withdrawn / published date:** 2009-09-24 _(verified: appears in the quote below)_ > 42832,IS,,ISO 7404-5:2009,Methods for the petrographic analysis of coals — Part 5: Method of determining microscopically the reflectance of vitrinite,Méthodes d'analyse pétrographique des charbons — Partie 5: Détermination au microscope du pouvoir réflecteur de la vitrinite,2009-09-24,3,['73.040'],ISO/TC 27/SC 5,9599,[14132],"[83414,87004]",['en'],14,"
ISO 7404-5:2009 specifies the methods for determining the reflectance of vitrinite of coals microcopically on the polished surfaces, immersed in oil. The methods are applicable to coals from single seams or coal blends covering the whole range of low-, medium- and high-rank coal.
Vitrinite reflectance measurements can be used to charac Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7405:1997 - **Identifier:** ISO 7405:1997 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Preclinical evaluation of biocompatibility of medical devices used in dentistry — Test methods for dental materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7405:2008 - **Withdrawn / published date:** 1997-08-21 _(verified: appears in the quote below)_ > 14134,IS,,ISO 7405:1997,Dentistry — Preclinical evaluation of biocompatibility of medical devices used in dentistry — Test methods for dental materials,Art dentaire — Évaluation préclinique de la biocompatibilité des dispositifs médicaux utilisés en art dentaire — Méthodes d'essai des produits dentaires,1997-08-21,1,"['11.060.10','11.100.99']",ISO/TC 106,9599,[14133],[38059],"['en','fr']",18, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7405:2008 - **Identifier:** ISO 7405:2008 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Evaluation of biocompatibility of medical devices used in dentistry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7405:2018 - **Withdrawn / published date:** 2008-11-25 _(verified: appears in the quote below)_ > 38059,IS,,ISO 7405:2008,Dentistry — Evaluation of biocompatibility of medical devices used in dentistry,Art dentaire — Évaluation de la biocompatibilité des dispositifs médicaux utilisés en art dentaire,2008-11-25,2,"['11.060.10','11.100.99']",ISO/TC 106,9599,[14134],[71503],"['en','fr']",34,
ISO 7405:2008 specifies test methods for the evaluation of biological effects of medical devices used in dentistry. It includes testing of pharmacological agents that are an integral part of the device under test.
ISO 7405:2008 does not cover testing of materials and devices that do not come into direct or indirect contact with the patient's body.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7405:2008/Amd 1:2013 - **Identifier:** ISO 7405:2008/Amd 1:2013 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Evaluation of biocompatibility of medical devices used in dentistry — Amendment 1: Positive control material _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7405:2018 - **Withdrawn / published date:** 2013-07-16 _(verified: appears in the quote below)_ > 59502,IS,Amd,ISO 7405:2008/Amd 1:2013,Dentistry — Evaluation of biocompatibility of medical devices used in dentistry — Amendment 1: Positive control material,Art dentaire — Évaluation de la biocompatibilité des dispositifs médicaux utilisés en art dentaire — Amendement 1: Matériaux de contrôle positif,2013-07-16,2,"['11.060.10','11.100.99']",ISO/TC 106,9599,,[71503],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7405:2018 - **Identifier:** ISO 7405:2018 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Evaluation of biocompatibility of medical devices used in dentistry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7405:2025 - **Withdrawn / published date:** 2018-10-15 _(verified: appears in the quote below)_ > 71503,IS,,ISO 7405:2018,Dentistry — Evaluation of biocompatibility of medical devices used in dentistry,Médecine bucco-dentaire — Évaluation de la biocompatibilité des dispositifs médicaux utilisés en médecine bucco-dentaire,2018-10-15,3,"['11.060.10','11.100.99']",ISO/TC 106,9599,"[61084,59502,38059]",[83683],"['en','fr']",43,This document specifies test methods for the evaluation of biological effects of medical devices used in dentistry. It includes testing of pharmacological agents that are an integral part of the device under test.
This document does not cover testing of materials and devices that do not come into direct or indirect contact with the patient's body.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7406:1986 - **Identifier:** ISO 7406:1986 _(verified: appears in the quote below)_ - **Item title:** Bore type milling cutters for indexable inserts — Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 11529-2:1998 - **Withdrawn / published date:** 1986-08-28 _(verified: appears in the quote below)_ > 14135,IS,,ISO 7406:1986,Bore type milling cutters for indexable inserts — Designation,Fraises à trou à plaquettes amovibles — Désignation,1986-08-28,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[27102],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7409:1984 - **Identifier:** ISO 7409:1984 _(verified: appears in the quote below)_ - **Item title:** Fertilizers — Marking — Presentation and declarations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7409:2018 - **Withdrawn / published date:** 1984-03-01 _(verified: appears in the quote below)_ > 14138,IS,,ISO 7409:1984,Fertilizers — Marking — Presentation and declarations,Engrais — Marquage — Présentation et mentions à déclarer,1984-03-01,1,['65.080'],ISO/TC 134,9599,,[65976],"['en','fr']",2,"The standard includes the establishment of the label size, the position of the declarations and the size of the characters. These details will vary according to whether the container holds more than 25 kg, or from 5 to 25 kg, or less than 5 kg.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 741:1976 - **Identifier:** ISO 741:1976 _(verified: appears in the quote below)_ - **Item title:** Sodium carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 741 - **Withdrawn / published date:** 1976-02-01 _(verified: appears in the quote below)_ > 4991,IS,,ISO 741:1976,Sodium carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method,Carbonate de sodium à usage industriel — Dosage de l'hydrogénocarbonate de sodium — Méthode titrimétrique,1976-02-01,1,['71.060.50'],ISO/TC 47,9599,,[4992],"['en','fr']",2,"The method is applicable to sodium carbonate products having a sodium hydrogen carbonate contained in a test portion into sodium carbonate by addition of a known excess of sodium hydroxide, precipitation of all the carbonate by means of barium chloride an determination of the excess of sodium hydroxide by means of a standard volumetric hydrochloric acid solution.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7411:1984 - **Identifier:** ISO 7411:1984 _(verified: appears in the quote below)_ - **Item title:** Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) — Product grade C — Property classes 8.8 and 10.9 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7411 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 14140,IS,,ISO 7411:1984,Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) — Product grade C — Property classes 8.8 and 10.9,"Vis à tête hexagonale à serrage contrôlé pour constructions métalliques, à surplats série large (longueurs filetées conformes à l'ISO 888) — Grade C — Classes de qualité 8.8 et 10.9",1984-11-01,1,['21.060.10'],ISO/TC 2,9599,,[14141],"['en','fr']",7,"Specifies series with metric dimensions and thread sizes form M 12 up to and including M 36 for use with nuts according to ISO 4775; tabulates general dimensions, specifications and reference standards, screw thread limits for tolerance class 6az, and f Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7412:1984 - **Identifier:** ISO 7412:1984 _(verified: appears in the quote below)_ - **Item title:** Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7412 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 14142,IS,,ISO 7412:1984,Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9,"Vis à tête hexagonale à serrage contrôlé pour constructions métalliques, à surplats série large (longueur filetée écourtée) — Grade C — Classes de qualité 8.8 et 10.9",1984-11-01,1,['21.060.10'],ISO/TC 2,9599,,[14143],"['en','fr']",7,"
Specifies series with metric dimensions and thread sizes form M 12 up to and including M 36 for use with nuts according to ISO 4775; tabulates general dimensions, specifications and reference standards, screw thread limits for tolerance class 6az, and for testing nut rotation require Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7413:1984 - **Identifier:** ISO 7413:1984 _(verified: appears in the quote below)_ - **Item title:** Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) — Product grades A and B — Property classes 5, 6 and 8 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7413 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 14144,IS,,ISO 7413:1984,"Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) — Product grades A and B — Property classes 5, 6 and 8","Écrous hexagonaux galvanisés à chaud pour constructions métalliques (filetages majorés), style 1 — Grades A et B — Classes de qualité 5, 6 et 8",1984-10-01,1,['21.060.20'],ISO/TC 2,9599,,[14145],"['en','fr']",4,"
Specifies series with metric dimensions and thread sizes form M 12 up to and including M 36; tabulates general dimensions, specifications and reference standards, proof load values and screw thread limits for tolerance class 6AX; gives an example for the designation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7414:1984 - **Identifier:** ISO 7414:1984 _(verified: appears in the quote below)_ - **Item title:** Hexagon nuts for structural bolting with large width across flats, style 1 — Product grade B — Property class 10 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7414 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 14146,IS,,ISO 7414:1984,"Hexagon nuts for structural bolting with large width across flats, style 1 — Product grade B — Property class 10","Écrous hexagonaux pour constructions métalliques à surplats série large, style 1 — Grade B — Classe de qualité 10",1984-11-01,1,['21.060.20'],ISO/TC 2,9599,,[21226],"['en','fr']",6,"Specifies series with metric dimensions and thread sizes from M12 up to including M 36; tabulates general dimensions, specifications and reference standards, proof load values, screw thread limits for tolerance class 6AZ, and for testing nut rotation requirements; gives an example for the designation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7415:1984 - **Identifier:** ISO 7415:1984 _(verified: appears in the quote below)_ - **Item title:** Plain washers for high-strength structural bolting, hardened and tempered _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7415 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 14147,IS,,ISO 7415:1984,"Plain washers for high-strength structural bolting, hardened and tempered",Rondelles plates trempées et revenues pour vis à serrage contrôlé pour constructions métalliques,1984-10-01,1,['21.060.30'],ISO/TC 2/SC 11,9599,,[21227],"['en','fr']",2,Specifies products intended for assembly with large series hexagon bolts and nuts of diameters from M 12 up to and including M 36; includes specifications with reference to International Standards; gives an example for the designation.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7416:1984 - **Identifier:** ISO 7416:1984 _(verified: appears in the quote below)_ - **Item title:** Plain washers, chamfered, hardened and tempered for high-strength structural bolting _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7416 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 14148,IS,,ISO 7416:1984,"Plain washers, chamfered, hardened and tempered for high-strength structural bolting",Rondelles plates chanfreinées trempées et revenues pour vis à serrage contrôlé pour constructions métalliques,1984-11-01,1,['21.060.30'],ISO/TC 2,9599,,[14149],"['en','fr']",3,Specifies products intended for assembly with large series hexgon bolts and nuts of diameters from M 12 up to and including M 36; includes specifications with reference to International Standards; gives an example for the designation.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7417:1984 - **Identifier:** ISO 7417:1984 _(verified: appears in the quote below)_ - **Item title:** Hexagon nuts for structural bolting — Style 2, hot-dip galvanized (oversize tapped) — Product grade A — Property class 9 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7417 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 14150,IS,,ISO 7417:1984,"Hexagon nuts for structural bolting — Style 2, hot-dip galvanized (oversize tapped) — Product grade A — Property class 9","Écrous hexagonaux galvanisés à chaud pour constructions métalliques (filetages majorés), style 2 — Grade A — Classe de qualité 9",1984-11-01,1,['21.060.20'],ISO/TC 2,9599,,[14151],"['en','fr']",4,"Specifies series with metric dimensions and thread sizes from M 10 up to and including M 16; tabulates general dimensions, specifications and reference standards, proof load stresses and screw thread limits for tolerance class 6 AX; gives an example for the designation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7419:1984 - **Identifier:** ISO 7419:1984 _(verified: appears in the quote below)_ - **Item title:** Leisure accommodation vehicles — Ventilation requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7419:1991 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 14153,IS,,ISO 7419:1984,Leisure accommodation vehicles — Ventilation requirements,Véhicules habitables de loisir — Exigences de ventilation,1984-11-01,1,['43.100'],ISO/TC 177,9599,,[14154],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7425-1:1988 - **Identifier:** ISO 7425-1:1988 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 1: Piston seal housings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7425-1:2021 - **Withdrawn / published date:** 1988-11-10 _(verified: appears in the quote below)_ > 14160,IS,,ISO 7425-1:1988,"Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 1: Piston seal housings",Transmissions hydrauliques — Logements pour joints en élastomère renforcé par des matières plastiques — Partie 1: Logements de joints de piston,1988-11-10,1,['23.100.20'],ISO/TC 131/SC 7,9599,,[77171],"['en','fr']",5,This part specifies the dimensions and associated tolerances for a series of housings to accomodate seals used in reciprocating applications. Does not stipulate details of seal design. This part applies only to the dimensional characteristics of products. Does not apply to their functional characteristics. Figure Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7425-2:1989 - **Identifier:** ISO 7425-2:1989 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 2: Rod seal housings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7425-2:2021 - **Withdrawn / published date:** 1989-11-30 _(verified: appears in the quote below)_ > 14161,IS,,ISO 7425-2:1989,"Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 2: Rod seal housings",Transmissions hydrauliques — Logements pour joints en élastomère renforcé par des matières plastiques — Dimensions et tolérances — Partie 2: Logements de joints de tige,1989-11-30,1,['23.100.20'],ISO/TC 131/SC 7,9599,,[77172],"['en','fr']",3,
This part specifies the dimensions and associated tolerances for a series of housings to accomodate seals used in reciprocating applications. Does not stipulate details of seal design. This part applies only to the dimensional characteristics of products. Does not apply to their functional ch Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 743:1976 - **Identifier:** ISO 743:1976 _(verified: appears in the quote below)_ - **Item title:** Sodium carbonate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 743 - **Withdrawn / published date:** 1976-02-01 _(verified: appears in the quote below)_ > 4995,IS,,ISO 743:1976,Sodium carbonate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method,Carbonate de sodium à usage industriel — Dosage des sulfates — Méthode gravimétrique à l'état de sulfate de baryum,1976-02-01,1,['71.060.50'],ISO/TC 47,9599,,[4996],"['en','fr']",3,"
The principle in dissolution of a test portion and separation of the insoluble matter. Precipitation of sulphate as barium sulphate in dilute hydrochloric acid medium. Separation of the precipitate obtained and ignition at 800 °C +- 25 °C and weighing. The method is applicable to products having a sodium sulphate content equal to or greater than 0,01 % (m/m). Replaces ISO Recommend Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7432:2002 - **Identifier:** ISO 7432:2002 _(verified: appears in the quote below)_ - **Item title:** Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7432:2018 - **Withdrawn / published date:** 2002-07-11 _(verified: appears in the quote below)_ > 33014,IS,,ISO 7432:2002,"Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals","Tubes et raccords en plastiques thermodurcissables renforcés de verre (PRV) — Méthodes d'essai pour confirmer la conception des assemblages mâle-femelle verrouillés, y compris ceux à double emboîture avec joints d'étanchéité en élastomère",2002-07-11,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 6,9599,,[65185],['en'],9,"
This International Standard specifies methods of test for joints with a locked socket and spigot, including double-socket joints, and with elastomeric seals, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7432:2018 - **Identifier:** ISO 7432:2018 _(verified: appears in the quote below)_ - **Item title:** Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7432:2021 - **Withdrawn / published date:** 2018-09-19 _(verified: appears in the quote below)_ > 65185,IS,,ISO 7432:2018,"Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals","Tubes et raccords en plastiques thermodurcissables renforcés de verre (PRV) — Méthodes d'essai pour confirmer la conception des assemblages mâle-femelle verrouillés, y compris ceux à double emboîture avec joints d'étanchéité en élastomère",2018-09-19,2,"['23.040.45','23.040.20']",ISO/TC 138/SC 6,9599,[33014],[78222],['en'],12,"
This document specifies methods of test for joints with a locked socket and spigot, including double-socket joints, and with elastomeric seals, for bu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7434:1983 - **Identifier:** ISO 7434:1983 _(verified: appears in the quote below)_ - **Item title:** Slotted set screws with cone point _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7434:2024 - **Withdrawn / published date:** 1983-09-01 _(verified: appears in the quote below)_ > 14170,IS,,ISO 7434:1983,Slotted set screws with cone point,"Vis sans tête, fendues, à bout pointu",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[80080],"['en','fr']",3,"
Specifies the characteristics of products with metric dimensions and thread sizes from M 1,2 up to and including M 12 and product grade A; includes specifications with reference to International Standards; tabulates thread sizes M 1,2 up to M 12 with nominal lengths from 2 mm up to 60mm; gives an example for the designation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7435:1983 - **Identifier:** ISO 7435:1983 _(verified: appears in the quote below)_ - **Item title:** Slotted set screws with long dog point _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7435:2024 - **Withdrawn / published date:** 1983-09-01 _(verified: appears in the quote below)_ > 14171,IS,,ISO 7435:1983,Slotted set screws with long dog point,"Vis sans tête, fendues, à téton long",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[80081],"['en','fr']",3,"Specifies the characteristics of products with metric dimensions and thread sizes from M 1,6 up to and including M 12 and product grade A; includes specifications with reference to International Standards; tabulates thread sizes M 1,6 up to M 12 with nominal lengths from 2 mm up to 60 mm; gives an example for the designation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7436:1983 - **Identifier:** ISO 7436:1983 _(verified: appears in the quote below)_ - **Item title:** Slotted set screws with cup point _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7436:2024 - **Withdrawn / published date:** 1983-09-01 _(verified: appears in the quote below)_ > 14172,IS,,ISO 7436:1983,Slotted set screws with cup point,"Vis sans tête, fendues, à bout cuvette",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[80082],"['en','fr']",3,"Specifies the characteristics of products with metric dimensions and thread sizes from M 1,6 up to and including M 12 and product grade A; includes specifications with reference to International Standards; tabulates thread sizes M 1,6 up to M 12 with nominal lengths from 2 mm up to 60 mm; gives an example for the designation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7438:1985 - **Identifier:** ISO 7438:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Bend test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7438:2005 - **Withdrawn / published date:** 1985-07-04 _(verified: appears in the quote below)_ > 14174,IS,,ISO 7438:1985,Metallic materials — Bend test,Matériaux métalliques — Essai de pliage,1985-07-04,1,['77.040.10'],ISO/TC 164/SC 2,9599,"[3737,4398,5378,3735]",[35928],"['en','fr']",5,"Specifies the method for determining the ability of metallic materials to undergo plastic deformation in bending. Applies to the bend test of test pieces taken from metallic products as specified in the relevant product standards. It is not applicable to certain materials and/or products, for example tubes in full section or welded joints, for which other standards exist.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7438:2005 - **Identifier:** ISO 7438:2005 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Bend test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7438:2016 - **Withdrawn / published date:** 2005-06-20 _(verified: appears in the quote below)_ > 35928,IS,,ISO 7438:2005,Metallic materials — Bend test,Matériaux métalliques — Essai de pliage,2005-06-20,2,['77.040.10'],ISO/TC 164/SC 2,9599,[14174],[67980],"['en','fr']",8,"ISO 7438:2005 specifies a method for determining the ability of metallic materials to undergo plastic deformation in bending.
ISO 7438:2005 applies to test pieces taken from metallic products as specified in the relevant product standard. It is not applicable to certain materials or products, for example tubes in full section or welded joints, for which other standards exist.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7438:2016 - **Identifier:** ISO 7438:2016 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Bend test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7438:2020 - **Withdrawn / published date:** 2016-01-04 _(verified: appears in the quote below)_ > 67980,IS,,ISO 7438:2016,Metallic materials — Bend test,Matériaux métalliques — Essai de pliage,2016-01-04,3,['77.040.10'],ISO/TC 164/SC 2,9599,[35928],[72187],"['en','fr']",8,"ISO 7438:2016 specifies a method for determining the ability of metallic materials to undergo plastic deformation in bending.
ISO 7438:2016 applies to test pieces taken from metallic products, as specified in the relevant product standard. It is not applicable to certain materials or products, for example tubes in full section or welded joints, for which other standards exist.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7439:2002 - **Identifier:** ISO 7439:2002 _(verified: appears in the quote below)_ - **Item title:** Copper-bearing intra-uterine contraceptive devices — Requirements, tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7439:2011 - **Withdrawn / published date:** 2002-03-14 _(verified: appears in the quote below)_ > 26775,IS,,ISO 7439:2002,"Copper-bearing intra-uterine contraceptive devices — Requirements, tests","Dispositifs intra-utérins contenant du cuivre — Exigences, essais",2002-03-14,1,['11.200'],ISO/TC 157,9599,[14175],[56522],"['en','fr']",11,ISO 7439:2002 is applicable to single-use copper-bearing intra-uterine contraceptive devices and their insertion instruments.
ISO 7439:2002 is not applicable to intra-uterine contraceptive devices consisting only of a plastics body and intra-uterine contraceptive devices whose primary purpose is to release progestogens.
Some aspects of ISO 7439:2002 are applicable to medicated intra-uterine devices and intra-uterine devices that do not cont Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7439:2011 - **Identifier:** ISO 7439:2011 _(verified: appears in the quote below)_ - **Item title:** Copper-bearing contraceptive intrauterine devices — Requirements and tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7439:2015 - **Withdrawn / published date:** 2011-05-27 _(verified: appears in the quote below)_ > 56522,IS,,ISO 7439:2011,Copper-bearing contraceptive intrauterine devices — Requirements and tests,"Dispositifs intra-utérins contenant du cuivre — Exigences, essais",2011-05-27,2,['11.200'],ISO/TC 157,9599,[26775],[66174],"['en','fr']",11,"
ISO 7439:2010 specifies requirements and tests for single-use, copper-bearing contraceptive intrauterine devices (IUDs) and their insertion instruments. (Some aspects can be applicable to medicated intrauterine devices and IUDs not containing copper.)
It is not applicable to IUDs consisting only of a plastics body or whose primary purpose is to release progestogens.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7439:2015 - **Identifier:** ISO 7439:2015 _(verified: appears in the quote below)_ - **Item title:** Copper-bearing contraceptive intrauterine devices — Requirements and tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7439:2023 - **Withdrawn / published date:** 2015-02-09 _(verified: appears in the quote below)_ > 66174,IS,,ISO 7439:2015,Copper-bearing contraceptive intrauterine devices — Requirements and tests,Dispositifs contraceptifs intra-utérins contenant du cuivre — Exigences et essais,2015-02-09,3,['11.200'],ISO/TC 157,9599,[56522],[82276],"['en','fr']",11,"ISO 7439:2015 specifies requirements and tests for single-use, copper-bearing contraceptive intrauterine devices (IUDs) and their insertion instruments.
It is not applicable to IUDs consisting only of a plastics body or whose primary purpose is to release progestogens.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7440-1:1985 - **Identifier:** ISO 7440-1:1985 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Fuel injection equipment testing — Part 1: Calibrating nozzle and holder assemblies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7440-1:1991 - **Withdrawn / published date:** 1985-12-19 _(verified: appears in the quote below)_ > 14176,IS,,ISO 7440-1:1985,Road vehicles — Fuel injection equipment testing — Part 1: Calibrating nozzle and holder assemblies,Véhicules routiers — Essai des équipements d'injection de combustible — Partie 1: Ensembles porte-injecteur et injecteur de calibration,1985-12-19,1,"['43.060.40','43.180']",ISO/TC 22,9599,,[14177],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7440-2:1985 - **Identifier:** ISO 7440-2:1985 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Fuel injection equipment testing — Part 2: Orifice plate flow measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7440-2:1991 - **Withdrawn / published date:** 1985-11-21 _(verified: appears in the quote below)_ > 14178,IS,,ISO 7440-2:1985,Road vehicles — Fuel injection equipment testing — Part 2: Orifice plate flow measurement,Véhicules routiers — Essai des équipements d'injection de combustible — Partie 2: Mesurage du débit des pastilles à trou,1985-11-21,1,['43.060.40'],ISO/TC 22,9599,,[14179],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 157](https://referencesource.org/iso-standard-supersessions/p/157/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 159](https://referencesource.org/iso-standard-supersessions/p/159/) Last verified: 2026-08-05. Review by: 2027-02-02.