# Withdrawn and superseded ISO standards — page 155 of 246 Records 15401–15500. Every value below is quoted from the source named with it. ## ISO 7176-10:1988 - **Identifier:** ISO 7176-10:1988 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 10: Determination of obstacle-climbing ability of electric wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-10:2008 - **Withdrawn / published date:** 1988-11-17 _(verified: appears in the quote below)_ > 13786,IS,,ISO 7176-10:1988,Wheelchairs — Part 10: Determination of obstacle-climbing ability of electric wheelchairs,Fauteuils roulants — Partie 10: Détermination de l'aptitude des fauteuils roulants électriques à gravir les obstacles,1988-11-17,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[45984],"['en','fr']",3,

Subject of the test is the obstacle-climbing ability of the wheelchair over kerbs and steps. The height of steps is given between 20 mm and 200 mm for this test.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-11:1992 - **Identifier:** ISO 7176-11:1992 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 11: Test dummies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-11:2012 | ISO/CD 7176-11 - **Withdrawn / published date:** 1992-05-14 _(verified: appears in the quote below)_ > 13787,IS,,ISO 7176-11:1992,Wheelchairs — Part 11: Test dummies,Fauteuils roulants — Partie 11: Mannequins d'essai,1992-05-14,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[53056,30076]","['en','fr']",10,"

Specifies the construction of test dummies with nominal masses of 25 kg, 50 kg, 75 kg and 100 kg, intended for use as specified in other parts of ISO 7176. The test dummies are so designed that their centres of gravity with respect to a wheelchair under test are located at approximately the same positions as those of an average human being of the same mass seated in the wheelchair.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-14:1997 - **Identifier:** ISO 7176-14:1997 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 14: Power and control systems for electric wheelchairs — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 7176-14 | ISO 7176-14:2008 - **Withdrawn / published date:** 1997-10-16 _(verified: appears in the quote below)_ > 13790,IS,,ISO 7176-14:1997,Wheelchairs — Part 14: Power and control systems for electric wheelchairs — Requirements and test methods,Fauteuils roulants — Partie 14: Systèmes d'alimentation et de commande des fauteuils roulants électriques — Exigences et méthodes d'essai,1997-10-16,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[35014,39741]","['en','fr']",32, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-14:2008 - **Identifier:** ISO 7176-14:2008 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 14: Power and control systems for electrically powered wheelchairs and scooters — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 7176-14 | ISO 7176-14:2022 - **Withdrawn / published date:** 2008-02-11 _(verified: appears in the quote below)_ > 39741,IS,,ISO 7176-14:2008,Wheelchairs — Part 14: Power and control systems for electrically powered wheelchairs and scooters — Requirements and test methods,Fauteuils roulants — Partie 14: Systèmes d'alimentation et de commande des fauteuils roulants et des scooters électriques — Exigences et méthodes d'essai,2008-02-11,2,['11.180.10'],ISO/TC 173/SC 1,9599,[13790],"[51355,72408]","['en','ru']",53,

ISO 7176-14:2008 specifies requirements and associated test methods for the power and control systems of electrically powered wheelchairs and scooters. It sets safety and performance requirements that apply during normal use and some conditions of abuse and failure. It also specifies methods of Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-16:1997 - **Identifier:** ISO 7176-16:1997 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 16: Resistance to ignition of upholstered parts — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-16:2012 - **Withdrawn / published date:** 1997-04-24 _(verified: appears in the quote below)_ > 13792,IS,,ISO 7176-16:1997,Wheelchairs — Part 16: Resistance to ignition of upholstered parts — Requirements and test methods,Fauteuils roulants — Partie 16: Résistance à l'inflammation des parties rembourrées — Exigences et méthodes d'essai,1997-04-24,1,"['13.220.40','11.180.10']",ISO/TC 173/SC 1,9599,,[40992],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-16:2012 - **Identifier:** ISO 7176-16:2012 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 16: Resistance to ignition of postural support devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16840-10:2021 - **Withdrawn / published date:** 2012-12-06 _(verified: appears in the quote below)_ > 40992,IS,,ISO 7176-16:2012,Wheelchairs — Part 16: Resistance to ignition of postural support devices,Fauteuils roulants — Partie 16: Résistance à l'inflammation des dispositifs de soutien postural,2012-12-06,2,"['13.220.40','11.180.10']",ISO/TC 173/SC 1,9599,[13792],[79159],"['en','fr']",9,"

ISO 7176-16:2012 specifies requirements and test methods to assess the resistance to ignition by match flame equivalent of all postural support devices that are supplied to be part of a wheelchair or its seating system.

ISO 7176-16:2012 only determines the resistance to ignition of the devices tested and not the ignitability of the complete wheelchair.

ISO 7176-16:2012 allows for the separa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-19:2001 - **Identifier:** ISO 7176-19:2001 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 19: Wheeled mobility devices for use in motor vehicles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-19:2008 - **Withdrawn / published date:** 2001-09-27 _(verified: appears in the quote below)_ > 32989,IS,,ISO 7176-19:2001,Wheelchairs — Part 19: Wheeled mobility devices for use in motor vehicles,Fauteuils roulants — Partie 19: Dispositifs de mobilité montés sur roues et destinés à être utilisés dans des véhicules à moteur,2001-09-27,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[40993],['en'],31, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-19:2008 - **Identifier:** ISO 7176-19:2008 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-19:2022 - **Withdrawn / published date:** 2008-07-07 _(verified: appears in the quote below)_ > 40993,IS,,ISO 7176-19:2008,Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles,Fauteuils roulants — Partie 19: Dispositifs de mobilité montés sur roues et destinés à être utilisés comme sièges dans des véhicules à moteur,2008-07-07,2,['11.180.10'],ISO/TC 173/SC 1,9599,[32989],[71919],"['en','fr','ru']",43,"

ISO 7176-19:2008 applies to all manual and powered wheelchairs, including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward-facing seats in motor vehicles by children and adults with a body mass equal to or greater than 22 kg. ISO 7176-19:2008 specifies wheelchair design requirements, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-19:2008/Amd 1:2015 - **Identifier:** ISO 7176-19:2008/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles — Amendment 1: Annex G _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-19:2022 - **Withdrawn / published date:** 2015-11-16 _(verified: appears in the quote below)_ > 57023,IS,Amd,ISO 7176-19:2008/Amd 1:2015,Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles — Amendment 1: Annex G,Fauteuils roulants — Partie 19: Dispositifs de mobilité montés sur roues et destinés à être utilisés comme sièges dans des véhicules à moteur — Amendement 1: Annexe G,2015-11-16,2,['11.180.10'],ISO/TC 173/SC 1,9599,,[71919],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-2:1990 - **Identifier:** ISO 7176-2:1990 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7176-2 | ISO 7176-2:2001 - **Withdrawn / published date:** 1990-10-25 _(verified: appears in the quote below)_ > 13778,IS,,ISO 7176-2:1990,Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs,Fauteuils roulants — Partie 2: Détermination de la stabilité dynamique des fauteuils roulants électriques,1990-10-25,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[21928,34747]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-2:2001 - **Identifier:** ISO 7176-2:2001 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-2:2017 - **Withdrawn / published date:** 2001-06-14 _(verified: appears in the quote below)_ > 34747,IS,,ISO 7176-2:2001,Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs,Fauteuils roulants — Partie 2: Détermination de la stabilité dynamique des fauteuils roulants électriques,2001-06-14,2,['11.180.10'],ISO/TC 173/SC 1,9599,[13778],[57753],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-21:2003 - **Identifier:** ISO 7176-21:2003 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-21:2009 | ISO/NP 7176-21 - **Withdrawn / published date:** 2003-04-30 _(verified: appears in the quote below)_ > 23707,IS,,ISO 7176-21:2003,Wheelchairs — Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters,Fauteuils roulants — Partie 21: Exigences et méthodes d'essai pour la compatibilité des fauteuils roulants électriques et scooters motorisés,2003-04-30,1,"['33.100.01','11.180.10']",ISO/TC 173/SC 1,9599,,"[51048,40994]",['en'],15,

ISO 7176-21:2003 specifies requirements and test methods for electromagnetic emissions and for electromagnetic immunity of electrically powered wheelchairs and motorized scooters with a maximum speed of not more than 15 km/h for indoor and outdoor use by people with disabilities. It is also ap Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-21:2009 - **Identifier:** ISO 7176-21:2009 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-21:2025 - **Withdrawn / published date:** 2009-03-16 _(verified: appears in the quote below)_ > 51048,IS,,ISO 7176-21:2009,"Wheelchairs — Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers",Fauteuils roulants — Partie 21: Exigences et méthodes d'essai pour la compatibilité des fauteuils roulants électriques et scooters motorisés,2009-03-16,2,"['33.100.01','11.180.10']",ISO/TC 173/SC 1,9599,[23707],[82763],['en'],20,

ISO 7176-21:2009 specifies requirements and test methods for electromagnetic emissions and for electromagnetic immunity of electrically powered wheelchairs and scooters with a maximum speed of not more than 15 km/h intended for indoor and/or outdoor use by people with disabilities Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-22:2000 - **Identifier:** ISO 7176-22:2000 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 22: Set-up procedures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-22:2014 - **Withdrawn / published date:** 2000-05-11 _(verified: appears in the quote below)_ > 25790,IS,,ISO 7176-22:2000,Wheelchairs — Part 22: Set-up procedures,Fauteuils roulants — Partie 22: Modes opératoires de réglage,2000-05-11,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[60290],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-23:2002 - **Identifier:** ISO 7176-23:2002 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 23: Requirements and test methods for attendant-operated stair-climbing devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-28:2012 - **Withdrawn / published date:** 2002-07-25 _(verified: appears in the quote below)_ > 31275,IS,,ISO 7176-23:2002,Wheelchairs — Part 23: Requirements and test methods for attendant-operated stair-climbing devices,Fauteuils roulants — Partie 23: Exigences et méthodes d'essai pour les monte-escalier manipulés par une tierce personne,2002-07-25,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[45653],"['en','fr','ru']",35, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-24:2004 - **Identifier:** ISO 7176-24:2004 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 24: Requirements and test methods for user-operated stair-climbing devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-28:2012 - **Withdrawn / published date:** 2004-10-06 _(verified: appears in the quote below)_ > 31276,IS,,ISO 7176-24:2004,Wheelchairs — Part 24: Requirements and test methods for user-operated stair-climbing devices,Fauteuils roulants — Partie 24: Exigences et méthodes d'essai pour les monte-escalier manipulés par l'utilisateur,2004-10-06,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[45653],"['en','ru']",84,"

ISO 7176-24:2004 is applicable to user-operated stair-climbing chairs and user-operated stair-climbing wheelchair carriers where the stair-climbing device climbs backwards up the stairs, with the user facing downstairs, and climbs down the stairs in a forward position with the user facing downstairs.

ISO 7176-24:2004 specifies requirements and test methods for electrically power Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-25:2013 - **Identifier:** ISO 7176-25:2013 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 25: Batteries and chargers for powered wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-25:2022 - **Withdrawn / published date:** 2013-07-23 _(verified: appears in the quote below)_ > 54863,IS,,ISO 7176-25:2013,Wheelchairs — Part 25: Batteries and chargers for powered wheelchairs,Fauteuils roulants — Partie 25: Batteries et chargeurs pour fauteuils roulants motorisés,2013-07-23,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[79042],"['en','fr']",17,

ISO 7176-25:2013 specifies requirements and test methods for batteries and battery chargers intended for use with electrically powered wheelchairs. It is applicable to lead acid batteries and chargers intended for use with them. Requirements for chargers are applicable to those with a rated input voltage not greater than 250 V a.c. and a nominal output voltage not greater than 36 V.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-3:1988 - **Identifier:** ISO 7176-3:1988 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 3: Determination of efficiency of brakes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 7176-3 | ISO 7176-3:2003 - **Withdrawn / published date:** 1988-11-17 _(verified: appears in the quote below)_ > 13779,IS,,ISO 7176-3:1988,Wheelchairs — Part 3: Determination of efficiency of brakes,Fauteuils roulants — Partie 3: Détermination de l'efficacité des freins,1988-11-17,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[23016,35100]","['en','fr']",3,"

The use standard conditions of a wheelchair are simulated in these tests. Parking and running brake tests are specified for manual, electric and any other wheelchairs.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-3:2003 - **Identifier:** ISO 7176-3:2003 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 3: Determination of effectiveness of brakes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-3:2012 - **Withdrawn / published date:** 2003-04-28 _(verified: appears in the quote below)_ > 35100,IS,,ISO 7176-3:2003,Wheelchairs — Part 3: Determination of effectiveness of brakes,Fauteuils roulants — Partie 3: Détermination de l'efficacité des freins,2003-04-28,2,['11.180.10'],ISO/TC 173/SC 1,9599,[13779],[53816],['en'],11,"

ISO 7176-3:2003 specifies test methods and disclosure requirements for the effectiveness of brakes of manual wheelchairs and electrically powered wheelchairs, including scooters, intended to carry one person, with a maximum speed not exceeding 15 km/h.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-4:1988 - **Identifier:** ISO 7176-4:1988 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 4: Determination of energy consumption of electric wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-4:1997 - **Withdrawn / published date:** 1988-11-17 _(verified: appears in the quote below)_ > 13780,IS,,ISO 7176-4:1988,Wheelchairs — Part 4: Determination of energy consumption of electric wheelchairs,Fauteuils roulants — Partie 4: Détermination de la consommation d'énergie des fauteuils roulants électriques,1988-11-17,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[20336],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-4:1997 - **Identifier:** ISO 7176-4:1997 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-4:2008 - **Withdrawn / published date:** 1997-12-25 _(verified: appears in the quote below)_ > 20336,IS,,ISO 7176-4:1997,Wheelchairs — Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range,Fauteuils roulants — Partie 4: Consommation d'énergie des fauteuils roulants et scooters électriques pour la détermination de la distance théorique,1997-12-25,2,['11.180.10'],ISO/TC 173/SC 1,9599,[13780],[40991],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-5:1986 - **Identifier:** ISO 7176-5:1986 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 5: Determination of overall dimensions, mass and turning space _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-5:2008 - **Withdrawn / published date:** 1986-02-27 _(verified: appears in the quote below)_ > 13781,IS,,ISO 7176-5:1986,"Wheelchairs — Part 5: Determination of overall dimensions, mass and turning space","Fauteuils roulants — Partie 5: Détermination des dimensions hors tout, de la masse et de l'espace de giration",1986-02-27,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[46429],"['en','fr']",3,"

The methods for determining the overall dimensions (both ready for occupation and folded), and the other characteristics of wheelchairs (manual and electric) are specified. The minimum turning radius and turn-around width are illustrated.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-6:1988 - **Identifier:** ISO 7176-6:1988 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 6: Determination of maximum speed, acceleration and retardation of electric wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-6:2001 - **Withdrawn / published date:** 1988-11-17 _(verified: appears in the quote below)_ > 13782,IS,,ISO 7176-6:1988,"Wheelchairs — Part 6: Determination of maximum speed, acceleration and retardation of electric wheelchairs","Fauteuils roulants — Partie 6: Détermination de la vitesse, de l'accélération et du ralentissement maximaux des fauteuils roulants électriques",1988-11-17,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[23015],"['en','fr']",2,"

These tests shall be carried out on a hard, flat and horizontal plane. The surface of the plane shall have a coefficient of friction as defined in ISO 7176-13.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-6:2001 - **Identifier:** ISO 7176-6:2001 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 6: Determination of maximum speed, acceleration and deceleration of electric wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-6:2018 - **Withdrawn / published date:** 2001-10-11 _(verified: appears in the quote below)_ > 23015,IS,,ISO 7176-6:2001,"Wheelchairs — Part 6: Determination of maximum speed, acceleration and deceleration of electric wheelchairs","Fauteuils roulants — Partie 6: Détermination de la vitesse, de l'accélération et du ralentissement maximaux des fauteuils roulants électriques",2001-10-11,2,['11.180.10'],ISO/TC 173/SC 1,9599,[13782],[70589],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-8:1998 - **Identifier:** ISO 7176-8:1998 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-8:2014 - **Withdrawn / published date:** 1998-07-23 _(verified: appears in the quote below)_ > 13784,IS,,ISO 7176-8:1998,"Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths","Fauteuils roulants — Partie 8: Exigences et méthodes d'essai pour la résistance statique, la résistance aux chocs et la résistance à la fatigue",1998-07-23,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[64902],"['en','fr']",56, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-9:1988 - **Identifier:** ISO 7176-9:1988 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 9: Climatic tests for electric wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-9:2001 - **Withdrawn / published date:** 1988-11-17 _(verified: appears in the quote below)_ > 13785,IS,,ISO 7176-9:1988,Wheelchairs — Part 9: Climatic tests for electric wheelchairs,Fauteuils roulants — Partie 9: Essais climatiques pour fauteuils roulants électriques,1988-11-17,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[23821],"['en','fr']",2,

Prior to each test the wheelchair shall have been conditioned for at least 24 hours according to ISO 554. The effects of rain and changes of temperature are to be determined in accordance with IEC 529 and IEC 68-2-14.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7176-9:2001 - **Identifier:** ISO 7176-9:2001 _(verified: appears in the quote below)_ - **Item title:** Wheelchairs — Part 9: Climatic tests for electric wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7176-9:2009 - **Withdrawn / published date:** 2001-10-18 _(verified: appears in the quote below)_ > 23821,IS,,ISO 7176-9:2001,Wheelchairs — Part 9: Climatic tests for electric wheelchairs,Fauteuils roulants — Partie 9: Essais climatiques pour fauteuils roulants électriques,2001-10-18,2,['11.180.10'],ISO/TC 173/SC 1,9599,[13785],[50102],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 718:1982 - **Identifier:** ISO 718:1982 _(verified: appears in the quote below)_ - **Item title:** Laboratory glassware — Methods for thermal shock tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 718:1990 - **Withdrawn / published date:** 1982-04-01 _(verified: appears in the quote below)_ > 4945,IS,,ISO 718:1982,Laboratory glassware — Methods for thermal shock tests,Verrerie de laboratoire — Méthodes d'essai de choc thermique,1982-04-01,1,['71.040.20'],ISO/TC 48,9599,,[4946],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7181:1982 - **Identifier:** ISO 7181:1982 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Cylinders — Bore and rod area ratios _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7181:1991 - **Withdrawn / published date:** 1982-11-01 _(verified: appears in the quote below)_ > 13795,IS,,ISO 7181:1982,Hydraulic fluid power — Cylinders — Bore and rod area ratios,Transmissions hydrauliques — Vérins — Rapports entre surfaces d'alésage et de tige,1982-11-01,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[13796],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7181:1991 - **Identifier:** ISO 7181:1991 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Cylinders — Bore and rod area ratios _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3320:2013 | ISO/WD 7181 - **Withdrawn / published date:** 1991-10-10 _(verified: appears in the quote below)_ > 13796,IS,,ISO 7181:1991,Hydraulic fluid power — Cylinders — Bore and rod area ratios,Transmissions hydrauliques — Vérins — Rapports entre surfaces d'alésage et de tige,1991-10-10,2,['23.100.20'],ISO/TC 131/SC 3,9599,[13795],"[61647,36110]","['en','fr']",3,

Specifies for each pair of diameters (AL = cylinder bore; MM = piston rod diameter) of cylinders a corresponding standard ratio between the useful areas A1 and A2. This second edition cancels and replaces the first edition (1982).

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7182:1984 - **Identifier:** ISO 7182:1984 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Measurement at the operator's position of airborne noise emitted by chain saws _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 22868:2005 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 13797,IS,,ISO 7182:1984,Acoustics — Measurement at the operator's position of airborne noise emitted by chain saws,Acoustique — Mesurage au niveau de l'oreille de l'opérateur du bruit émis par les scies à chaîne,1984-10-01,1,"['65.060.80','17.140.20']",ISO/TC 23/SC 17,9599,,[35167],"['en','fr']",3,"

Specifies a method for measuring the A-weighted and octave band sound pressure levels of noise emission by portable, hand-held, combustion engine saws for use primarily in forestry. The operating conditions during test simulate normal operating conditions in the forest.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7183:1986 - **Identifier:** ISO 7183:1986 _(verified: appears in the quote below)_ - **Item title:** Compressed air dryers — Specifications and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7183:2007 - **Withdrawn / published date:** 1986-03-13 _(verified: appears in the quote below)_ > 13798,IS,,ISO 7183:1986,Compressed air dryers — Specifications and testing,Sécheurs à air comprimé — Spécifications et essais,1986-03-13,1,['23.140'],ISO/TC 118/SC 4,9599,,[39401],"['en','fr']",13,"

Specifies reference conditions, acceptance test methods and the most important characteristic data of different dryers. Applicable to dryers working in the effective (gauge) pressure range of 0,16 to 40 MPa, but excluding: liquid absorption types; cooling with aftercooler; overcompression. A test report form is shown in annex A. Annex b includes a typical testing system for air dryers. Saturation pressure and density of pure water vapour is tabulated in annex C.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7183-2:1996 - **Identifier:** ISO 7183-2:1996 _(verified: appears in the quote below)_ - **Item title:** Compressed air dryers — Part 2: Performance ratings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7183:2007 - **Withdrawn / published date:** 1996-03-07 _(verified: appears in the quote below)_ > 13799,IS,,ISO 7183-2:1996,Compressed air dryers — Part 2: Performance ratings,Sécheurs d'air comprimé — Partie 2: Caractéristiques nominales de fonctionnement,1996-03-07,1,['23.140'],ISO/TC 118/SC 4,9599,,[39401],"['en','fr']",6,

Provides general information to assist users and engineers in the selection of the type of compressed air dryer which will best serve their needs. Does not cover safety requirements.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7185:1983 - **Identifier:** ISO 7185:1983 _(verified: appears in the quote below)_ - **Item title:** Programming languages — PASCAL _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7185:1990 - **Withdrawn / published date:** 1983-12-01 _(verified: appears in the quote below)_ > 13801,IS,,ISO 7185:1983,Programming languages — PASCAL,Langages de programmation — PASCAL,1983-12-01,1,['35.060'],ISO/IEC JTC 1/SC 22,9599,,[13802],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7186:1983 - **Identifier:** ISO 7186:1983 _(verified: appears in the quote below)_ - **Item title:** Ductile iron pipes and accessories for non-pressure pipe-lines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7186:1996 - **Withdrawn / published date:** 1983-08-01 _(verified: appears in the quote below)_ > 13803,IS,,ISO 7186:1983,Ductile iron pipes and accessories for non-pressure pipe-lines,Tuyaux et pièces accessoires en fonte ductile pour canalisations sans pression,1983-08-01,1,"['91.140.80','77.140.75']",ISO/TC 5/SC 2,9599,,[1313],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7186:1996 - **Identifier:** ISO 7186:1996 _(verified: appears in the quote below)_ - **Item title:** Ductile iron products for sewage applications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7186:2011 - **Withdrawn / published date:** 1996-12-26 _(verified: appears in the quote below)_ > 1313,IS,,ISO 7186:1996,Ductile iron products for sewage applications,Produits en fonte ductile pour l'assainissement,1996-12-26,2,"['93.030','77.140.80']",ISO/TC 5/SC 2,9599,[13803],[50913],"['en','fr']",22,"

Requirements and test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7187:1983 - **Identifier:** ISO 7187:1983 _(verified: appears in the quote below)_ - **Item title:** Photography — Direct positive colour print camera materials — Determination of ISO speed _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7187:1995 - **Withdrawn / published date:** 1983-11-01 _(verified: appears in the quote below)_ > 13804,IS,,ISO 7187:1983,Photography — Direct positive colour print camera materials — Determination of ISO speed,Photographie — Surfaces sensibles pour appareils photographiques donnant directement une épreuve positive en couleur — Détermination de la sensibilité ISO,1983-11-01,1,['37.040.20'],ISO/TC 42,9599,,[22023],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7188:1985 - **Identifier:** ISO 7188:1985 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Measurement of noise emitted by passenger cars under conditions representative of urban driving _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7188:1994 - **Withdrawn / published date:** 1985-11-07 _(verified: appears in the quote below)_ > 13805,IS,,ISO 7188:1985,Acoustics — Measurement of noise emitted by passenger cars under conditions representative of urban driving,Acoustique — Mesurage du bruit émis par les voitures particulières dans des conditions représentatives de la conduite en ville,1985-11-07,1,"['17.140.30','43.100']",ISO/TC 43/SC 1,9599,,[21249],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7188:1994 - **Identifier:** ISO 7188:1994 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Measurement of noise emitted by passenger cars under conditions representative of urban driving _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 362-1:2007 | ISO 362-2:2009 - **Withdrawn / published date:** 1994-12-01 _(verified: appears in the quote below)_ > 21249,IS,,ISO 7188:1994,Acoustics — Measurement of noise emitted by passenger cars under conditions representative of urban driving,Acoustique — Mesurage du bruit émis par les voitures particulières dans des conditions représentatives de la conduite en ville,1994-12-01,2,"['17.140.30','43.100']",ISO/TC 43/SC 1,9599,[13805],"[42210,42211]","['en','fr']",5,

Cancels and replaces the first edition (1985). Specifies a method for measuring the noise emitted by passenger cars in motion. The method is based on statistical studies of the use of cars in urban driving. The specifications are intended to reproduce the noise level which is exceeded during only 5 % of the total driving time in urban tra Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 719:1981 - **Identifier:** ISO 719:1981 _(verified: appears in the quote below)_ - **Item title:** Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 719:1985 - **Withdrawn / published date:** 1981-10-01 _(verified: appears in the quote below)_ > 4947,IS,,ISO 719:1981,Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification,Verre — Résistance hydrolytique du verre en grains à 98 degrés C — Méthode d'essai et classification,1981-10-01,1,['81.040.01'],ISO/TC 76,9599,,[4948],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 719:1985 - **Identifier:** ISO 719:1985 _(verified: appears in the quote below)_ - **Item title:** Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 719:2020 - **Withdrawn / published date:** 1985-10-03 _(verified: appears in the quote below)_ > 4948,IS,,ISO 719:1985,Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification,Verre — Résistance hydrolytique du verre en grains à 98 degrés C — Méthode d'essai et classification,1985-10-03,2,['81.040.01'],ISO/TC 76,9599,[4947],[77843],"['en','fr']",5,"

The principle, reagents, apparatus and procedure are specified. The resistance is expressed by the volume of acid required for titration of the alkali extracted from the unit mass of glass. For five classes of grain the limit values in the test are listed.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7194:1983 - **Identifier:** ISO 7194:1983 _(verified: appears in the quote below)_ - **Item title:** Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7194:2008 - **Withdrawn / published date:** 1983-09-01 _(verified: appears in the quote below)_ > 13811,IS,,ISO 7194:1983,Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes,Mesure de débit des fluides dans les conduites fermées — Mesure de débit dans les conduites circulaires dans le cas d'un écoulement giratoire ou dissymétrique par exploration du champ des vitesses au moyen de moulinets ou de tubes de Pitot doubles,1983-09-01,1,['17.120.10'],ISO/TC 30/SC 5,9599,,[50627],"['en','fr']",24,"

In order to carry out measurements given above with satisfactory accuracy (of the order of 2 % for example), it is usually necessary to choose a measurin Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7195:1993 - **Identifier:** ISO 7195:1993 _(verified: appears in the quote below)_ - **Item title:** Packaging of uranium hexafluoride (UF6) for transport _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7195:2005 - **Withdrawn / published date:** 1993-10-28 _(verified: appears in the quote below)_ > 13812,IS,,ISO 7195:1993,Packaging of uranium hexafluoride (UF6) for transport,Emballage de l'hexafluorure d'uranium (UF6) en vue de son transport,1993-10-28,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[31251],"['en','fr']",40,"

Specifies requirements concerning the design, manufacture and testing of transport cylinders and packaging, the in-service testing and shipping requirements. Annex A includes principles for the safe handling of UF6, annex B gives typical examples of sampling and transport cylinders, valves and packaging, annex C describes properties of UF6, its reaction products and associated hazards.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7195:2005 - **Identifier:** ISO 7195:2005 _(verified: appears in the quote below)_ - **Item title:** Nuclear energy — Packaging of uranium hexafluoride (UF6) for transport _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7195:2020 - **Withdrawn / published date:** 2005-09-06 _(verified: appears in the quote below)_ > 31251,IS,,ISO 7195:2005,Nuclear energy — Packaging of uranium hexafluoride (UF6) for transport,Énergie nucléaire — Emballage de l'hexafluorure d'uranium (UF6) en vue de son transport,2005-09-06,2,['27.120.30'],ISO/TC 85/SC 5,9599,[13812],[78109],"['en','fr']",72,"

ISO 7195:2005 specifies requirements for packaging of uranium hexafluoride (UF6) for transport.

It applies to packages designed to contain uranium hexafluoride in quantities of 0,1 kg or more; design, manufacture, inspection and testing of new cylinders and protective packagings; maintenance, repair, inspection and testing of cylinders and protective packagings; and in-service inspection and testing requirements Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7197:1989 - **Identifier:** ISO 7197:1989 _(verified: appears in the quote below)_ - **Item title:** Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7197:1997 - **Withdrawn / published date:** 1989-07-13 _(verified: appears in the quote below)_ > 13814,IS,,ISO 7197:1989,"Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components","Implants pour neurochirurgie — Systèmes de dérivation et composants stériles, non réutilisables, pour hydrocéphalie",1989-07-13,1,['11.040.40'],ISO/TC 150,9599,,[13815],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7197:1997 - **Identifier:** ISO 7197:1997 _(verified: appears in the quote below)_ - **Item title:** Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7197:2006 - **Withdrawn / published date:** 1997-10-23 _(verified: appears in the quote below)_ > 13815,IS,,ISO 7197:1997,"Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components","Implants pour neurochirurgie — Systèmes de dérivation et composants stériles, non réutilisables, pour hydrocéphalie",1997-10-23,2,['11.040.40'],ISO/TC 150,9599,[13814],[38403],['en'],16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7197:2006 - **Identifier:** ISO 7197:2006 _(verified: appears in the quote below)_ - **Item title:** Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7197:2024 - **Withdrawn / published date:** 2006-06-09 _(verified: appears in the quote below)_ > 38403,IS,,ISO 7197:2006,"Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components","Implants neurochirurgicaux — Systèmes de dérivation et composants stériles, non réutilisables, pour hydrocéphalie",2006-06-09,3,['11.040.40'],ISO/TC 150,9599,[13815],[83698],"['en','fr','ru']",6,"

ISO 7197:2006 specifies safety and performance requirements for sterile, single-use non-active hydrocephalus shunts and components. This includes the components used in shunts, like valves, tubes and reservoirs.

For manufacturing, ISO 7197:2006 defines the mechanical and technical requirements. This International Standard defines the technical information of the valve, to be given by Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7197:2006/Cor 1:2007 - **Identifier:** ISO 7197:2006/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7197:2024 - **Withdrawn / published date:** 2007-07-02 _(verified: appears in the quote below)_ > 46408,IS,Cor,ISO 7197:2006/Cor 1:2007,"Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components — Technical Corrigendum 1","Implants neurochirurgicaux — Systèmes de dérivation et composants stériles, non réutilisables, pour hydrocéphalie — Rectificatif technique 1",2007-07-02,3,['11.040.40'],ISO/TC 150,9599,,[83698],"['en','fr','ru']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7198:1998 - **Identifier:** ISO 7198:1998 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants — Tubular vascular prostheses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7198:2016 - **Withdrawn / published date:** 1998-07-23 _(verified: appears in the quote below)_ > 25374,IS,,ISO 7198:1998,Cardiovascular implants — Tubular vascular prostheses,Implants cardiovasculaires — Prothèses vasculaires tubulaires,1998-07-23,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[50661],['en'],48, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7199:1996 - **Identifier:** ISO 7199:1996 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7199:2009 - **Withdrawn / published date:** 1996-12-12 _(verified: appears in the quote below)_ > 13818,IS,,ISO 7199:1996,Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators),Implants cardiovasculaires et organes artificiels — Échangeurs gaz/sang extracorporels (oxygénateurs),1996-12-12,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[51030],"['en','fr']",10,"

Requirements for sterile, single-use, extracorporeale blood-gas exchangers (oxygenators) intended for supply of oxygen to, and removal of carbon dioxide from, the blood of humans.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7199:2009 - **Identifier:** ISO 7199:2009 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7199:2016 - **Withdrawn / published date:** 2009-03-30 _(verified: appears in the quote below)_ > 51030,IS,,ISO 7199:2009,Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators),Implants cardiovasculaires et organes artificiels — Échangeurs gaz/sang extracorporels (oxygénateurs),2009-03-30,2,['11.040.40'],ISO/TC 150/SC 2,9599,[13818],[67607],"['en','fr','ru']",11,"

ISO 7199:2009 specifies requirements for sterile, single-use, extracorporeal blood-gas exchangers (oxygenators) intended for supply of oxygen to, and removal of carbon dioxide from, the blood of humans.

ISO 7199:2009 also applies to heat exchangers that are integral parts of oxygenators and to external equipment unique to the use of the device.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7199:2009/Amd 1:2012 - **Identifier:** ISO 7199:2009/Amd 1:2012 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) — Amendment 1: Clarifications for test methodologies, labelling, and sampling schedule _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7199:2016 - **Withdrawn / published date:** 2012-02-22 _(verified: appears in the quote below)_ > 55930,IS,Amd,ISO 7199:2009/Amd 1:2012,"Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) — Amendment 1: Clarifications for test methodologies, labelling, and sampling schedule","Implants cardiovasculaires et organes artificiels — Échangeurs gaz/sang extracorporels (oxygénateurs) — Amendement 1: Éclaircissements pour les méthodologies d'essai, le marquage et le plan d'échantillonnage",2012-02-22,2,['11.040.40'],ISO/TC 150/SC 2,9599,,[67607],"['en','fr','ru']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7199:2016 - **Identifier:** ISO 7199:2016 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7199:2024 | ISO/PWI 7199 - **Withdrawn / published date:** 2016-11-07 _(verified: appears in the quote below)_ > 67607,IS,,ISO 7199:2016,Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators),Implants cardiovasculaires et organes artificiels — Échangeurs gaz/sang extracorporels (oxygénateurs),2016-11-07,3,['11.040.40'],ISO/TC 150/SC 2,9599,"[55930,51030]","[83184,80227]","['en','fr']",13,"

ISO 7199:2016 specifies requirements for sterile, single-use, extracorporeal blood-gas exchangers (oxygenators) intended for supply of oxygen to, and removal of carbon dioxide from, the blood of humans.

ISO 7199:2016 also applies to heat exchangers and arterial filters that are integral parts of the oxygenator.

ISO 7199:2016 also applies to external equipment unique to the us Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7199:2016/Amd 1:2020 - **Identifier:** ISO 7199:2016/Amd 1:2020 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) — Amendment 1: Connectors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7199:2024 | ISO/PWI 7199 - **Withdrawn / published date:** 2020-03-16 _(verified: appears in the quote below)_ > 74732,IS,Amd,ISO 7199:2016/Amd 1:2020,Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) — Amendment 1: Connectors,Implants cardiovasculaires et organes artificiels — Échangeurs gaz/sang extracorporels (oxygénateurs) — Amendement 1: Raccords,2020-03-16,3,['11.040.40'],ISO/TC 150/SC 2,9599,,"[83184,80227]","['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 720:1981 - **Identifier:** ISO 720:1981 _(verified: appears in the quote below)_ - **Item title:** Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 720:1985 - **Withdrawn / published date:** 1981-10-01 _(verified: appears in the quote below)_ > 4949,IS,,ISO 720:1981,Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification,Verre — Résistance hydrolytique du verre en grains à 121 degrés C — Méthode d'essai et classification,1981-10-01,1,['81.040.01'],ISO/TC 76,9599,,[4950],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 720:1985 - **Identifier:** ISO 720:1985 _(verified: appears in the quote below)_ - **Item title:** Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 720 | ISO 720:2020 - **Withdrawn / published date:** 1985-10-10 _(verified: appears in the quote below)_ > 4950,IS,,ISO 720:1985,Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification,Verre — Résistance hydrolytique du verre en grains à 121 degrés C — Méthode d'essai et classification,1985-10-10,2,['81.040.01'],ISO/TC 76,9599,[4949],"[26924,77844]","['en','fr']",5,"

The principle, reagents, apparatus and the procedure are specified. The resistance is expressed by the volume of acid required for titration of the alkali extracted from the unit mass of glass. The permissible range of the values obtained and the limit values in the hydrolytic resistance grain test are listed.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7200:1984 - **Identifier:** ISO 7200:1984 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Title blocks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 7200 | ISO/DIS 7200-1 | ISO/DIS 7200-2 | ISO 7200:2004 - **Withdrawn / published date:** 1984-08-01 _(verified: appears in the quote below)_ > 13819,IS,,ISO 7200:1984,Technical drawings — Title blocks,Dessins techniques — Cartouches d'inscriptions,1984-08-01,1,['01.100.01'],ISO/TC 10/SC 1,9599,,"[1066,30121,30122,35446]","['en','fr']",3,"

Lays down appropriate rules and recommendations for the execution and practical use in the identification, administration and understanding of technical drawings and associated documents. It applies to all fields of engineering (mechanical, electrical, civil, etc.) and facilitates the exchange of documents ensuring compatibility with each other.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7201:1982 - **Identifier:** ISO 7201:1982 _(verified: appears in the quote below)_ - **Item title:** Fire protection — Fire extinguishing media — Halogenated hydrocarbons _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7201-1:1989 - **Withdrawn / published date:** 1982-09-01 _(verified: appears in the quote below)_ > 13820,IS,,ISO 7201:1982,Fire protection — Fire extinguishing media — Halogenated hydrocarbons,Protection contre l'incendie — Agents extincteurs — Hydrocarbures halogénés,1982-09-01,1,['13.220.10'],ISO/TC 21/SC 6,9599,,[13821],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7202:1987 - **Identifier:** ISO 7202:1987 _(verified: appears in the quote below)_ - **Item title:** Fire protection — Fire extinguishing media — Powder _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7202:2012 - **Withdrawn / published date:** 1987-06-18 _(verified: appears in the quote below)_ > 13823,IS,,ISO 7202:1987,Fire protection — Fire extinguishing media — Powder,Protection contre l'incendie — Agents extincteurs — Poudres,1987-06-18,1,['13.220.10'],ISO/TC 21/SC 6,9599,,[52817],"['en','fr']",12,"

Specifies requirements for the chemical and physical properties and for minimum performance in defined test methods of extinguishing powders suitable for use against fires of classes A, B and C. Requirements are also given for information and data to be declared by the manufacturer.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7202:2012 - **Identifier:** ISO 7202:2012 _(verified: appears in the quote below)_ - **Item title:** Fire protection — Fire extinguishing media — Powder _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7202:2018 - **Withdrawn / published date:** 2012-07-06 _(verified: appears in the quote below)_ > 52817,IS,,ISO 7202:2012,Fire protection — Fire extinguishing media — Powder,Protection contre l'incendie — Agents extincteurs — Poudres,2012-07-06,2,['13.220.10'],ISO/TC 21/SC 6,9599,[13823],[70451],"['en','ru']",23,"

ISO 7202:2012 specifies requirements for the chemical and physical properties, and for minimum performance in defined test methods, of fire extinguishing powders suitable for use against fires of classes A, B, C and D. Requirements are also given for the information and data to be declared by the manufacturer.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7203-1:1995 - **Identifier:** ISO 7203-1:1995 _(verified: appears in the quote below)_ - **Item title:** Fire extinguishing media — Foam concentrates — Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7203-1:2011 - **Withdrawn / published date:** 1995-12-21 _(verified: appears in the quote below)_ > 13824,IS,,ISO 7203-1:1995,Fire extinguishing media — Foam concentrates — Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids,Agents extincteurs — Émulseurs — Partie 1: Spécifications pour les émulseurs bas foisonnement destinés à une application par le haut sur les liquides non miscibles à l'eau,1995-12-21,1,['13.220.10'],ISO/TC 21/SC 6,9599,,[51960],"['en','fr']",25,

Contains the essential properties and requirements of liquid foam concentrates used to make low expansion foam for the control and extinction of fires of water-immiscible liquids.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7203-1:2011 - **Identifier:** ISO 7203-1:2011 _(verified: appears in the quote below)_ - **Item title:** Fire extinguishing media — Foam concentrates — Part 1: Specification for low-expansion foam concentrates for top application to water-immiscible liquids _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7203-1:2019 - **Withdrawn / published date:** 2011-05-13 _(verified: appears in the quote below)_ > 51960,IS,,ISO 7203-1:2011,Fire extinguishing media — Foam concentrates — Part 1: Specification for low-expansion foam concentrates for top application to water-immiscible liquids,Agents extincteurs — Émulseurs — Partie 1: Spécifications pour les émulseurs bas foisonnement destinés à une application par le haut sur les liquides non miscibles à l'eau,2011-05-13,2,['13.220.10'],ISO/TC 21/SC 6,9599,[13824],[70452],['en'],39,"

ISO 7203-1:2011 specifies the essential properties and performance of liquid foam concentrates used to make low-expansion foams for the control, extinction and inhibition of reignition of fires of water-immiscible liquids. Minimum performance on certain test fires is spec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7203-2:1995 - **Identifier:** ISO 7203-2:1995 _(verified: appears in the quote below)_ - **Item title:** Fire extinguishing media — Foam concentrates — Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7203-2:2011 - **Withdrawn / published date:** 1995-12-21 _(verified: appears in the quote below)_ > 13826,IS,,ISO 7203-2:1995,Fire extinguishing media — Foam concentrates — Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids,Agents extincteurs — Émulseurs — Partie 2: Spécifications pour les émulseurs moyen et haut foisonnements destinés à une application par le haut sur les liquides non miscibles à l'eau,1995-12-21,1,['13.220.10'],ISO/TC 21/SC 6,9599,,[52818],"['en','fr']",26,

Contains the essential properties and requirements of liquid foam concentrates used to make medium and/or high expansion foam for the control and extinction of fires of water-immiscible liquids.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7203-2:2011 - **Identifier:** ISO 7203-2:2011 _(verified: appears in the quote below)_ - **Item title:** Fire extinguishing media — Foam concentrates — Part 2: Specification for medium- and high-expansion foam concentrates for top application to water-immiscible liquids _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7203-2:2019 - **Withdrawn / published date:** 2011-05-13 _(verified: appears in the quote below)_ > 52818,IS,,ISO 7203-2:2011,Fire extinguishing media — Foam concentrates — Part 2: Specification for medium- and high-expansion foam concentrates for top application to water-immiscible liquids,Agents extincteurs — Émulseurs — Partie 2: Spécifications pour les émulseurs moyen et haut foisonnements destinés à une application par le haut sur les liquides non miscibles à l'eau,2011-05-13,2,['13.220.10'],ISO/TC 21/SC 6,9599,[13826],[70453],['en'],38,"

ISO 7203-2:2011 specifies the essential properties and performance of liquid foam concentrates used to make medium- or high-expansion foams or both for the control, extinction and inhibition of reignition of fires of water-immiscible liquids. Minim Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7203-3:1999 - **Identifier:** ISO 7203-3:1999 _(verified: appears in the quote below)_ - **Item title:** Fire extinguishing media — Foam concentrates — Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7203-3:2011 - **Withdrawn / published date:** 1999-03-04 _(verified: appears in the quote below)_ > 20734,IS,,ISO 7203-3:1999,Fire extinguishing media — Foam concentrates — Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids,Agents extincteurs — Émulseurs — Partie 3: Spécifications pour les émulseurs bas foisonnement destinés à une application par le haut sur les liquides miscibles à l'eau,1999-03-04,1,['13.220.10'],ISO/TC 21/SC 6,9599,,[52819],"['en','fr']",19, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7203-3:2011 - **Identifier:** ISO 7203-3:2011 _(verified: appears in the quote below)_ - **Item title:** Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7203-3:2019 - **Withdrawn / published date:** 2011-08-02 _(verified: appears in the quote below)_ > 52819,IS,,ISO 7203-3:2011,Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids,Agents extincteurs — Émulseurs — Partie 3: Spécifications pour les émulseurs bas foisonnement destinés à une application par le haut sur les liquides miscibles à l'eau,2011-08-02,2,['13.220.10'],ISO/TC 21/SC 6,9599,[20734],[70454],['en'],39,"

ISO 7203-3:2011 specifies the essential properties and performance of liquid foam concentrates used to make low-expansion foams for the control, extinction and inhibition of reignition of fires of water-miscible liquids. Minimum performance on certain test fires is specified. 13829,IS,,ISO 7205:1986,Radionuclide gauges — Gauges designed for permanent installation,Jauges à radioéléments — Appareils destinés à être installés à poste fixe,1986-12-18,1,['13.280'],ISO/TC 85/SC 2,9599,,[45508],"['en','fr']",15,"

Establishes the following characteristics: a classification of the gauges and shielding devices, technical construction and performance requirements for radiation protection when using a radioactive source, control and test methods to verify the compliance with those requirements, indications to be shown on the gauges. Does not apply to gauges which are not subject to general rules regarding supply and possession of artificial radionuclides nor to ion generat Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-1:1985 - **Identifier:** ISO 7206-1:1985 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification, designation of dimensions and requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-1:1995 - **Withdrawn / published date:** 1985-08-29 _(verified: appears in the quote below)_ > 13830,IS,,ISO 7206-1:1985,"Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification, designation of dimensions and requirements","Implants chirurgicaux — Prothèse orthopédique partielle et totale de l'articulation de la hanche — Partie 1: Classification, désignation des dimensions et spécifications",1985-08-29,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[20980],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-1:1995 - **Identifier:** ISO 7206-1:1995 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification and designation of dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-1:2008 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 20980,IS,,ISO 7206-1:1995,Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification and designation of dimensions,Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 1: Classification et désignation des dimensions,1995-08-24,2,['11.040.40'],ISO/TC 150/SC 4,9599,[13830],[42768],"['en','fr']",7,

Specifies the means of classification and defines the designation of dimensions for partial and total hip joint prostheses. Classified as femoral prostheses and acetabular prostheses.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-10:2003 - **Identifier:** ISO 7206-10:2003 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip-joint prostheses — Part 10: Determination of resistance to static load of modular femoral heads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-10:2018 - **Withdrawn / published date:** 2003-12-01 _(verified: appears in the quote below)_ > 31211,IS,,ISO 7206-10:2003,Implants for surgery — Partial and total hip-joint prostheses — Part 10: Determination of resistance to static load of modular femoral heads,Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 10: Détermination de la résistance à la charge statique de têtes fémorales modulaires,2003-12-01,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[71145],"['en','fr']",10,"

ISO 7206-10:2003 applies to femoral heads of partial or total hip-joint replacements of modular construction (i.e. a head/neck conical taper connection) and describes methods of determining the load required, under specified laboratory conditions, to cause failure of the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-12:2016 - **Identifier:** ISO 7206-12:2016 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-12:2025 - **Withdrawn / published date:** 2016-09-23 _(verified: appears in the quote below)_ > 63710,IS,,ISO 7206-12:2016,Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells,Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 12: Méthode d’essai de déformation des cupules acétabulaires,2016-09-23,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[85682],"['en','fr']",8,"

ISO 7206-12:2016 specifies a test method for determining short-term deformation of a press-fit acetabular component for total hip joint replacement under specific laboratory conditions. It also defines the conditions of testing so that the important parameters that affect the components are taken into account and it de Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-2:1987 - **Identifier:** ISO 7206-2:1987 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 2: Bearing surfaces made of metallic and plastics materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-2:1996 - **Withdrawn / published date:** 1987-04-02 _(verified: appears in the quote below)_ > 13831,IS,,ISO 7206-2:1987,Implants for surgery — Partial and total hip joint prostheses — Part 2: Bearing surfaces made of metallic and plastics materials,Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 2: Surfaces portantes articulaires constituées de matériaux métalliques et plastiques,1987-04-02,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[13832],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-2:1996 - **Identifier:** ISO 7206-2:1996 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-2:2011 - **Withdrawn / published date:** 1996-05-30 _(verified: appears in the quote below)_ > 13832,IS,,ISO 7206-2:1996,"Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials","Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 2: Surfaces articulaires constituées de matériaux métalliques, céramiques et plastiques",1996-05-30,2,['11.040.40'],ISO/TC 150/SC 4,9599,[13831],[51947],"['en','fr']",4,"

Specifies requirements for the articulating surfaces of those types of total and partial hip joint prostheses that provide a joint replacement of ball and socket configuration, e.g. sphericity and surface finish for metallic and ceramic femoral prostheses, sp Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-4:1989 - **Identifier:** ISO 7206-4:1989 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties of stemmed femoral components with application of torsion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-4:2002 - **Withdrawn / published date:** 1989-07-20 _(verified: appears in the quote below)_ > 13834,IS,,ISO 7206-4:1989,Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties of stemmed femoral components with application of torsion,Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 4: Détermination des propriétés d'endurance des tiges fémorales avec application de torsion,1989-07-20,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[27441],"['en','fr']",7,

This standard defines a test method and laboratory conditions so that the important parameters that affect the components are taken into account and describes how the specimen is set up for testing. The test method has been developed for pros Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-4:2002 - **Identifier:** ISO 7206-4:2002 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties of stemmed femoral components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-4:2010 - **Withdrawn / published date:** 2002-10-25 _(verified: appears in the quote below)_ > 27441,IS,,ISO 7206-4:2002,Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties of stemmed femoral components,Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 4: Détermination des propriétés d'endurance des tiges fémorales,2002-10-25,2,['11.040.40'],ISO/TC 150/SC 4,9599,[13834],[42769],"['en','fr']",10,"

This part of ISO 7206 specifies a test method for determining the endurance properties, under specified laboratory conditions, of stemmed femoral components of total hip joint prostheses and stemmed femoral components used alone in partial hip joints. It also defines the conditions of tes Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-6:1992 - **Identifier:** ISO 7206-6:1992 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 6: Determination of endurance properties of head and neck region of stemmed femoral components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7206-6:2013 - **Withdrawn / published date:** 1992-03-19 _(verified: appears in the quote below)_ > 13836,IS,,ISO 7206-6:1992,Implants for surgery — Partial and total hip joint prostheses — Part 6: Determination of endurance properties of head and neck region of stemmed femoral components,Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 6: Détermination des propriétés d'endurance des têtes et cols des tiges fémorales,1992-03-19,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[51186],"['en','fr']",5,"

Describes test methods for determining the endurance properties under specified laboratory conditions. Specifies the principle, the reagents and materials, the apparatus, the procedure, the test report and the disposal of test specimens.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7206-8:1995 - **Identifier:** ISO 7206-8:1995 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total hip joint prostheses — Part 8: Endurance performance of stemmed femoral components with application of torsion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 7206-8 - **Withdrawn / published date:** 1995-04-06 _(verified: appears in the quote below)_ > 21009,IS,,ISO 7206-8:1995,Implants for surgery — Partial and total hip joint prostheses — Part 8: Endurance performance of stemmed femoral components with application of torsion,Implants chirurgicaux — Prothèses partielles et totales de l'articulation de la hanche — Partie 8: Performances en matière d'endurance des tiges fémorales avec application de torsion,1995-04-06,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[39475],"['en','fr']",1,

Specifies the endurance performance of stemmed femoral components of total hip joint prostheses and stemmed femoral components used alone in partial hip joint replacements as determined under specified laboratory conditions by a method that includes the applicati Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7207-1:1985 - **Identifier:** ISO 7207-1:1985 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7207-1:1994 - **Withdrawn / published date:** 1985-09-05 _(verified: appears in the quote below)_ > 13838,IS,,ISO 7207-1:1985,"Implants for surgery — Partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions","Implants chirurgicaux — Prothèse partielle et totale de l'articulation du genou — Partie 1: Classification, définitions et désignation des dimensions",1985-09-05,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[20981],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7207-1:1994 - **Identifier:** ISO 7207-1:1994 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Components for partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7207-1:2007 - **Withdrawn / published date:** 1994-10-27 _(verified: appears in the quote below)_ > 20981,IS,,ISO 7207-1:1994,"Implants for surgery — Components for partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions","Implants chirurgicaux — Éléments de prothèses partielle et totale de l'articulation du genou — Partie 1: Classification, définitions et désignation des dimensions",1994-10-27,2,['11.040.40'],ISO/TC 150/SC 4,9599,[13838],[39971],"['en','fr']",8,"

Cancels and replaces the first edition (1985). Classifies femoral and tibial components for knee joint protheses in which one or both bearing surfaces of at least one compartment of the knee are replaced, and gives definitions of components and the designation of dimensions. 23255,IS,,ISO 7207-2:1998,"Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials","Implants chirurgicaux — Éléments de prothèses partielle et totale de l'articulation du genou — Partie 2: Surfaces articulaires constituées de matériaux métalliques, céramiques et plastiques",1998-07-16,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[52683],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7207-2:2011 - **Identifier:** ISO 7207-2:2011 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7207-2:2025 - **Withdrawn / published date:** 2011-06-29 _(verified: appears in the quote below)_ > 52683,IS,,ISO 7207-2:2011,"Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials","Implants chirurgicaux — Éléments de prothèses partielle et totale de l'articulation du genou — Partie 2: Surfaces articulaires constituées de matériaux métalliques, céramiques et plastiques",2011-06-29,2,['11.040.40'],ISO/TC 150/SC 4,9599,[23255],[85678],"['en','fr','ru']",3,

ISO 7207-2:2011 specifies surface finish requirements for the articulating surfaces of total and partial knee joint prostheses classified in ISO 7207-1.

ISO 7207-2:2011 is intended to provide guidance for periodic validation of p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7207-2:2011/Amd 1:2016 - **Identifier:** ISO 7207-2:2011/Amd 1:2016 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7207-2:2025 - **Withdrawn / published date:** 2016-08-08 _(verified: appears in the quote below)_ > 67928,IS,Amd,ISO 7207-2:2011/Amd 1:2016,"Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 1","Implants chirurgicaux — Éléments de prothèses partielle et totale de l'articulation du genou — Partie 2: Surfaces articulaires constituées de matériaux métalliques, céramiques et plastiques — Amendement 1",2016-08-08,2,['11.040.40'],ISO/TC 150/SC 4,9599,,[85678],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7207-2:2011/Amd 2:2020 - **Identifier:** ISO 7207-2:2011/Amd 2:2020 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7207-2:2025 - **Withdrawn / published date:** 2020-06-24 _(verified: appears in the quote below)_ > 74552,IS,Amd,ISO 7207-2:2011/Amd 2:2020,"Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 2","Implants chirurgicaux — Éléments de prothèses partielle et totale de l'articulation du genou — Partie 2: Surfaces articulaires constituées de matériaux métalliques, céramiques et plastiques — Amendement 2",2020-06-24,2,['11.040.40'],ISO/TC 150/SC 4,9599,,[85678],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7208:1984 - **Identifier:** ISO 7208:1984 _(verified: appears in the quote below)_ - **Item title:** Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7208:1999 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 13839,IS,,ISO 7208:1984,"Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method)","Lait écrémé, sérum et babeurre — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence)",1984-11-01,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[27798],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7208:1999 - **Identifier:** ISO 7208:1999 _(verified: appears in the quote below)_ - **Item title:** Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7208:2008 - **Withdrawn / published date:** 1999-11-25 _(verified: appears in the quote below)_ > 27798,IS,,ISO 7208:1999,"Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method)","Lait écrémé, sérum et babeurre — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence)",1999-11-25,2,['67.100.01'],ISO/TC 34/SC 5,9599,[13839],[51014],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7208:2008 - **Identifier:** ISO 7208:2008 _(verified: appears in the quote below)_ - **Item title:** Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 23318:2022 - **Withdrawn / published date:** 2008-10-02 _(verified: appears in the quote below)_ > 51014,IS,,ISO 7208:2008,"Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method)","Lait écrémé, sérum et babeurre — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence)",2008-10-02,3,['67.100.01'],ISO/TC 34/SC 5,9599,[27798],[75226],"['en','fr']",14,"

ISO 7208|IDF 22:2008 specifies the reference method for the determination of the fat content of liquid skimmed milk, whey and buttermilk. It is a particularly accurate gravimetric method especially for the purpose of establishing the operating efficiency of cream separators.

ISO 7208|IDF 22:2008 also specifies the reference method for establishing co Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 721:1974 - **Identifier:** ISO 721:1974 _(verified: appears in the quote below)_ - **Item title:** Rock drilling — Integral stems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 721:1991 - **Withdrawn / published date:** 1974-07-01 _(verified: appears in the quote below)_ > 4951,IS,,ISO 721:1974,Rock drilling — Integral stems,Forage des roches — Fleurets monoblocs,1974-07-01,1,['73.100.30'],ISO/TC 82,9599,,[4952],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7210:1983 - **Identifier:** ISO 7210:1983 _(verified: appears in the quote below)_ - **Item title:** Smoking machines for tobacco and tobacco products — Non-routine test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7210:1997 - **Withdrawn / published date:** 1983-06-01 _(verified: appears in the quote below)_ > 13840,IS,,ISO 7210:1983,Smoking machines for tobacco and tobacco products — Non-routine test methods,Machines à fumer pour tabac et produits du tabac — Méthodes d'essais non habituels,1983-06-01,1,['65.160'],ISO/TC 126/SC 1,9599,,[22454],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7210:1997 - **Identifier:** ISO 7210:1997 _(verified: appears in the quote below)_ - **Item title:** Routine analytical cigarette-smoking machine — Additional test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7210:2013 - **Withdrawn / published date:** 1997-01-22 _(verified: appears in the quote below)_ > 22454,IS,,ISO 7210:1997,Routine analytical cigarette-smoking machine — Additional test methods,Machine à fumer analytique de routine pour cigarettes — Méthodes d'essais complémentaires,1997-01-22,2,['65.160'],ISO/TC 126/SC 1,9599,[13840],[56094],"['en','fr']",7,

Contains additional test methods for routine analytical cigarette-smoking machines. Intended to check the conformity of these machines with ISO 3308. Replaces the first edition.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7210:2013 - **Identifier:** ISO 7210:2013 _(verified: appears in the quote below)_ - **Item title:** Routine analytical cigarette-smoking machine — Additional test methods for machine verification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7210:2018 - **Withdrawn / published date:** 2013-01-21 _(verified: appears in the quote below)_ > 56094,IS,,ISO 7210:2013,Routine analytical cigarette-smoking machine — Additional test methods for machine verification,Machine à fumer analytique de routine pour cigarettes — Méthodes d'essais complémentaires pour la vérification de la machine,2013-01-21,3,['65.160'],ISO/TC 126/SC 1,9599,[22454],[73134],"['en','fr']",7,

ISO 7210:2013 specifies additional test methods for routine analytical cigarette-smoking machines intended to check the conformity of these machines with Clause 4 of ISO 3308.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7211-2:1984 - **Identifier:** ISO 7211-2:1984 _(verified: appears in the quote below)_ - **Item title:** Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7211-2:2024 - **Withdrawn / published date:** 1984-03-01 _(verified: appears in the quote below)_ > 13842,IS,,ISO 7211-2:1984,Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length,Textiles — Tissus — Construction — Méthodes d'analyse — Partie 2: Détermination du nombre de fils par unité de longueur,1984-03-01,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[86700],"['en','fr']",6,"

Three methods of determining the number of threads per centimetre are included, any of which may be used, the choice depending on the character of the fabric. The principles are as follows: Method A: A section of fabric of dimension specified is dissected and the number of threads counted. The treads that are to be counted are preferably short, 1 or 2 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7211-5:1984 - **Identifier:** ISO 7211-5:1984 _(verified: appears in the quote below)_ - **Item title:** Textiles — Woven fabrics - Construction - Methods of analysis — Part 5: Determination of linear density of yarn removed from fabric _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7211-5:2020 - **Withdrawn / published date:** 1984-03-01 _(verified: appears in the quote below)_ > 13845,IS,,ISO 7211-5:1984,Textiles — Woven fabrics - Construction - Methods of analysis — Part 5: Determination of linear density of yarn removed from fabric,Titre manque — Partie 5: Détermination de la masse linéique d’un fil prélevé dans un tissu,1984-03-01,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[74893],"['en','fr']",4,"

Threads are removed from rectangular strips of fabric, the straightened length of a portion of them is determined and their mass is determined either in equilibrium with the standard atmosphere for testing textiles (method A) or oven-dry plus the commercial allowance given in ISO 6741/4 (method B). Linear density is calculated from the mass and the sum of the straightened Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7211-6:1984 - **Identifier:** ISO 7211-6:1984 _(verified: appears in the quote below)_ - **Item title:** Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7211-6:2020 - **Withdrawn / published date:** 1984-03-01 _(verified: appears in the quote below)_ > 13846,IS,,ISO 7211-6:1984,Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric,Textiles — Tissus — Construction — Méthodes d'analyse — Partie 6: Détermination de la masse des fils de chaîne et de trame par unité de surface dans un tissu,1984-03-01,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[74894],"['en','fr']",2,"

Two methods are established. Method A: The outline of the fabrics specimen to be dissected is marked in the form of a square or rectangle, and the non-fibrous matter is removed while the marked area still forms part of a larger sample. Method B: A specimen of known area is dissected and the non-fibr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7213:1981 - **Identifier:** ISO 7213:1981 _(verified: appears in the quote below)_ - **Item title:** Pulps — Sampling for testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7213:2021 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 13848,IS,,ISO 7213:1981,Pulps — Sampling for testing,Pâtes — Échantillonnage pour essais,1981-11-01,1,['85.040'],ISO/TC 6,9599,,[83382],"['en','fr']",2,"

Applies to all kinds of pulp delivered in bales or rolls, and is recommended for use when sampling for all kinds of testing purposes except for the determination of saleable mass. If the pulp is to be tested for saleable mass, in addition to other properties, the gross sample obtained according to the appropriate International Standard for sampling saleable mass may also be used for the other pulp property test.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7214:1985 - **Identifier:** ISO 7214:1985 _(verified: appears in the quote below)_ - **Item title:** Cellular plastics — Polyethylene — Methods of test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7214:1998 - **Withdrawn / published date:** 1985-01-31 _(verified: appears in the quote below)_ > 13849,IS,,ISO 7214:1985,Cellular plastics — Polyethylene — Methods of test,Plastiques alvéolaires — Polyéthylène — Méthodes d'essai,1985-01-31,1,['83.100'],ISO/TC 61/SC 10,9599,,[13850],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7214:1998 - **Identifier:** ISO 7214:1998 _(verified: appears in the quote below)_ - **Item title:** Cellular plastics — Polyethylene — Methods of test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7214:2007 - **Withdrawn / published date:** 1998-03-19 _(verified: appears in the quote below)_ > 13850,IS,,ISO 7214:1998,Cellular plastics — Polyethylene — Methods of test,Plastiques alvéolaires — Polyéthylène — Méthodes d'essai,1998-03-19,2,['83.100'],ISO/TC 61/SC 10,9599,[13849],[34851],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7214:2007 - **Identifier:** ISO 7214:2007 _(verified: appears in the quote below)_ - **Item title:** Cellular plastics — Polyethylene — Methods of test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7214:2012 - **Withdrawn / published date:** 2007-06-13 _(verified: appears in the quote below)_ > 34851,IS,,ISO 7214:2007,Cellular plastics — Polyethylene — Methods of test,Plastiques alvéolaires — Polyéthylène — Méthodes d'essai,2007-06-13,3,['83.100'],ISO/TC 61/SC 10,9599,[13850],[60772],"['en','fr']",11,"

ISO 7214:2007 specifies methods for testing flexible and semi-rigid cellular plastics made from polyethylene. Cellular plastics containing copolymers of ethylene or blends of polymers with polyethylene may also be tested by the procedures of this International Standard provided these materials have characteristics similar to polyethylene or copolymers of ethylene.

The tests are divided into mandatory tests suitable for characterization of cellular polyethylene regardless of e Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7215:1985 - **Identifier:** ISO 7215:1985 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of relative reducibility _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7215:1995 - **Withdrawn / published date:** 1985-08-01 _(verified: appears in the quote below)_ > 13851,IS,,ISO 7215:1985,Iron ores — Determination of relative reducibility,Minerais de fer — Détermination de la réductibilité relative,1985-08-01,1,['73.060'],ISO/TC 102/SC 3,9599,,[1580],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7215:1995 - **Identifier:** ISO 7215:1995 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of relative reducibility _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7215:2007 - **Withdrawn / published date:** 1995-11-09 _(verified: appears in the quote below)_ > 1580,IS,,ISO 7215:1995,Iron ores — Determination of relative reducibility,Minerais de fer — Détermination de la réductibilité relative,1995-11-09,2,['73.060.10'],ISO/TC 102/SC 3,9599,[13851],[38074],"['en','fr']",9,

Describes a method for the determination of relative reducibility of natural and processed iron ores. Replaces the first edition of which some clauses have been technical revised.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 7215:2007 - **Identifier:** ISO 7215:2007 _(verified: appears in the quote below)_ - **Item title:** Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7215:2015 - **Withdrawn / published date:** 2007-10-30 _(verified: appears in the quote below)_ > 38074,IS,,ISO 7215:2007,Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index,Minerais de fer pour charges de hauts fourneaux — Détermination de la réductibilité relative par le degré final de l'indice de réduction,2007-10-30,3,['73.060.10'],ISO/TC 102/SC 3,9599,[1580],[62142],['en'],11,"

ISO 7215:2007 specifies a method to provide a relative measure for evaluating the extent to which oxygen can be removed from iron ores when reduced under conditions resembling those prevailing in the reduction zone of a blast furnace.

ISO 7215:2007 is applicable to lump ores, sinters and hot-bonded pellets.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 154](https://referencesource.org/iso-standard-supersessions/p/154/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 156](https://referencesource.org/iso-standard-supersessions/p/156/) Last verified: 2026-08-05. Review by: 2027-02-02.