ISO 6802:2005 describes a pressure impulse test with flexing for wire-reinforced rubber and plastics hydraulic hoses and hose assemblies.
The test is applicable to high-pressure hydraulic hoses and hose assemblies, which are subject to pulsating pressure in service.
This International Standard describes two methods of flexing the hose o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6803:1984 - **Identifier:** ISO 6803:1984 _(verified: appears in the quote below)_ - **Item title:** Rubber or plastics hoses and hose assemblies — Hydraulic pressure impulse test without flexing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6803:1994 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 13305,IS,,ISO 6803:1984,Rubber or plastics hoses and hose assemblies — Hydraulic pressure impulse test without flexing,Tuyaux et flexibles en caoutchouc et en plastique — Essai d'impulsions de pression hydraulique sans flexions,1984-12-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[13306],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6803:1994 - **Identifier:** ISO 6803:1994 _(verified: appears in the quote below)_ - **Item title:** Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6803:2008 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 13306,IS,,ISO 6803:1994,Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing,Tuyaux et flexibles en caoutchouc ou en plastique — Essai d'impulsions de pression hydraulique sans flexions,1994-09-29,2,['23.040.70'],ISO/TC 45/SC 1,9599,[13305],[43709],"['en','fr']",4,
Cancels and replaces the first edition (1984). Describes a pressure impulse test without flexing for rubber or plastics hydraulic hoses and hose assemblies. The test is applicable to high-pressure hydraulic hoses and hose assemblies which are subject to pulsating pressures in service.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6803:2008 - **Identifier:** ISO 6803:2008 _(verified: appears in the quote below)_ - **Item title:** Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6803:2017 - **Withdrawn / published date:** 2008-08-18 _(verified: appears in the quote below)_ > 43709,IS,,ISO 6803:2008,Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing,Tuyaux et flexibles en caoutchouc ou en plastique — Essai d'impulsions de pression hydraulique sans flexion,2008-08-18,3,['23.040.70'],ISO/TC 45/SC 1,9599,[13306],[68057],"['en','fr','ru']",5,"ISO 6803:2008 describes hose impulse testing, without flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pres Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6804:1982 - **Identifier:** ISO 6804:1982 _(verified: appears in the quote below)_ - **Item title:** Rubber hose and hose assemblies — Washing-machines and dishwashers — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6804:1991 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 13307,IS,,ISO 6804:1982,Rubber hose and hose assemblies — Washing-machines and dishwashers — Specification,Tuyaux et flexibles en caoutchouc — Machines à laver et lave-vaisselle — Spécification,1982-12-01,1,"['97.040.40','83.140.40','97.060']",ISO/TC 45/SC 1,9599,,[13308],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6804:1991 - **Identifier:** ISO 6804:1991 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6804:2009 - **Withdrawn / published date:** 1991-07-18 _(verified: appears in the quote below)_ > 13308,IS,,ISO 6804:1991,Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification,Tuyaux et flexibles en caoutchouc pour l'alimentation des machines à laver et lave-vaisselle — Spécifications,1991-07-18,2,"['97.040.40','83.140.40','97.060']",ISO/TC 45/SC 1,9599,[13307],[45403],"['en','fr']",5,
Specifies requirements for two types of hoses. Type 1: for unheated water supply only. Type 2: for heated water supply (max. 90°C). This second edition cancels and replaces the first edition (1982).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6804:2009 - **Identifier:** ISO 6804:2009 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6804:2016 - **Withdrawn / published date:** 2009-09-03 _(verified: appears in the quote below)_ > 45403,IS,,ISO 6804:2009,Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification,Tuyaux et flexibles en caoutchouc et en plastique pour l'alimentation des machines à laver et lave-vaisselle — Spécifications,2009-09-03,3,"['97.040.40','83.140.40','97.060']",ISO/TC 45/SC 1,9599,[13308],[68034],"['en','fr','ru']",13,ISO 6804:2009 specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar).
It is applicable to the following types of hose:
ISO 6804:2016 specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar).
It is applicable to the following types of hose:
- type 1: rubber hoses for unheated water supply Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6805:1984 - **Identifier:** ISO 6805:1984 _(verified: appears in the quote below)_ - **Item title:** Rubber hoses and hose assemblies for underground mining — Wire reinforced hydraulic type for coal mining _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6805:1994 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 13309,IS,,ISO 6805:1984,Rubber hoses and hose assemblies for underground mining — Wire reinforced hydraulic type for coal mining,Tuyaux et flexibles en caoutchouc pour l'exploitation minière — Type hydraulique avec armature de fils métalliques pour mines de charbon,1984-12-01,1,"['83.140','73.100.30']",ISO/TC 45/SC 1,9599,,[13310],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6805:1994 - **Identifier:** ISO 6805:1994 _(verified: appears in the quote below)_ - **Item title:** Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6805:2020 - **Withdrawn / published date:** 1994-10-06 _(verified: appears in the quote below)_ > 13310,IS,,ISO 6805:1994,Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification,Tuyaux et flexibles en caoutchouc pour les mines souterraines — Types hydrauliques avec armature de fils métalliques pour mines de charbon — Spécifications,1994-10-06,2,"['73.100.30','83.140.40']",ISO/TC 45/SC 1,9599,[13309],[72843],"['en','fr']",7,"
Cancels and replaces the first edition (1984). Specifies requirements for six types of embedded-wire hose and hose assembly of bore diameter from 5 mm to 51 mm for use with common hydraulic fluids such as mineral oils, soluble oils, oil and water emulsions, aqueous glycol solution and water at temper Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6806:1984 - **Identifier:** ISO 6806:1984 _(verified: appears in the quote below)_ - **Item title:** Rubber hoses and hose assemblies for use in oil burners — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6806:1992 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 13311,IS,,ISO 6806:1984,Rubber hoses and hose assemblies for use in oil burners — Specification,Tuyaux en caoutchouc et flexibles pour brûleurs — Spécifications,1984-12-01,1,"['83.140.40','23.040.70']",ISO/TC 45/SC 1,9599,,[13312],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6806:1992 - **Identifier:** ISO 6806:1992 _(verified: appears in the quote below)_ - **Item title:** Rubber hoses and hose assemblies for use in oil burners — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 6806 | ISO 6806:2014 - **Withdrawn / published date:** 1992-06-18 _(verified: appears in the quote below)_ > 13312,IS,,ISO 6806:1992,Rubber hoses and hose assemblies for use in oil burners — Specification,Tuyaux et fexibles en caoutchouc pour brûleurs — Spécifications,1992-06-18,2,"['27.060.10','83.140.40']",ISO/TC 45/SC 1,9599,[13311],"[41423,63806]","['en','fr']",8,"
Specifies the minimum requirements for two types of hose assembly: hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection, maximum working pressure 1,0 MPa (10 bar), maximum oil temperature 100 °C (type 1) and hose assemblies for insertion between the oil burner pump and the atomizing connection, working pressure 4,0 MPa (40 bar), maximum oil temperature 100 °C (type 2).< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6806:2014 - **Identifier:** ISO 6806:2014 _(verified: appears in the quote below)_ - **Item title:** Rubber hoses and hose assemblies for use in oil burners — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6806:2017 - **Withdrawn / published date:** 2014-09-15 _(verified: appears in the quote below)_ > 63806,IS,,ISO 6806:2014,Rubber hoses and hose assemblies for use in oil burners — Specification,Tuyaux et flexibles en caoutchouc pour brûleurs — Spécifications,2014-09-15,3,"['27.060.10','83.140.40']",ISO/TC 45/SC 1,9599,[13312],[68036],"['en','fr']",12,"
ISO 6806:2014 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified.
Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.
Type 2: Hose assemblies for insertion between the oil bur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6806:2017 - **Identifier:** ISO 6806:2017 _(verified: appears in the quote below)_ - **Item title:** Rubber hoses and hose assemblies for use in oil burners — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6806:2024 - **Withdrawn / published date:** 2017-05-31 _(verified: appears in the quote below)_ > 68036,IS,,ISO 6806:2017,Rubber hoses and hose assemblies for use in oil burners — Specification,Tuyaux et flexibles en caoutchouc pour brûleurs à fuel — Spécifications,2017-05-31,4,"['27.060.10','83.140.40']",ISO/TC 45/SC 1,9599,[63806],[86388],"['en','fr']",14,"
ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified.
- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.
- Type 2: Hose assemblies for insertio Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6807:1984 - **Identifier:** ISO 6807:1984 _(verified: appears in the quote below)_ - **Item title:** Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6807:2003 - **Withdrawn / published date:** 1984-11-01 _(verified: appears in the quote below)_ > 13313,IS,,ISO 6807:1984,Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification,Tuyaux et flexibles en caoutchouc pour forage rotatif et amortissement des vibrations — Spécifications,1984-11-01,1,"['83.140.40','75.180.10']",ISO/TC 45/SC 1,9599,[21876],[34470],"['en','fr']",3,"
Requirements for textile- and steel-reinforced hoses are specified for use with water- and/or oil-based muds with a minimum aniline point of 66 °C pumped at high pressure in large volumes. The hoses are suitable for use at temperatures up to 80 °C and are reistant to ageing, to tropical conditions and to ambient temperatures down to -30 °C. 3 tables and 1 figure give detailed r Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6808:1984 - **Identifier:** ISO 6808:1984 _(verified: appears in the quote below)_ - **Item title:** Plastics hoses for suction and low-pressure discharge — Petroleum liquids — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6808:1999 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 13314,IS,,ISO 6808:1984,Plastics hoses for suction and low-pressure discharge — Petroleum liquids — Specification,Tuyaux en plastique pour aspiration et refoulement basse pression — Liquides pétroliers — Spécifications,1984-12-01,1,"['83.140.40','75.200']",ISO/TC 45/SC 1,9599,,[2126],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6808:1999 - **Identifier:** ISO 6808:1999 _(verified: appears in the quote below)_ - **Item title:** Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6808:2014 - **Withdrawn / published date:** 1999-02-04 _(verified: appears in the quote below)_ > 2126,IS,,ISO 6808:1999,Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification,Tuyaux et flexibles en plastique pour aspiration et refoulement basse pression des liquides pétroliers — Spécifications,1999-02-04,2,"['83.140.40','75.200']",ISO/TC 45/SC 1,9599,[13314],[55656],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6809:1984 - **Identifier:** ISO 6809:1984 _(verified: appears in the quote below)_ - **Item title:** Rubber compounding ingredients — Carbon black — Standard reference blacks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6809:1989 - **Withdrawn / published date:** 1984-04-01 _(verified: appears in the quote below)_ > 13315,IS,,ISO 6809:1984,Rubber compounding ingredients — Carbon black — Standard reference blacks,Ingrédients de mélange du caoutchouc — Noir de carbone — Noirs de référence,1984-04-01,1,['83.040.20'],ISO/TC 45,9599,,[13316],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6809:1989 - **Identifier:** ISO 6809:1989 _(verified: appears in the quote below)_ - **Item title:** Rubber compounding ingredients — Carbon black — Standard reference blacks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TR 6809:1996 - **Withdrawn / published date:** 1989-03-09 _(verified: appears in the quote below)_ > 13316,IS,,ISO 6809:1989,Rubber compounding ingredients — Carbon black — Standard reference blacks,Ingrédients de mélange du caoutchouc — Noir de carbone — Noirs de référence,1989-03-09,2,['83.040.20'],ISO/TC 45/SC 3,9599,[13315],[25531],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6810:1985 - **Identifier:** ISO 6810:1985 _(verified: appears in the quote below)_ - **Item title:** Rubber compounding ingredients — Carbon black — Determination of surface area — Surfactant adsorption methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6810:1995 - **Withdrawn / published date:** 1985-09-12 _(verified: appears in the quote below)_ > 13317,IS,,ISO 6810:1985,Rubber compounding ingredients — Carbon black — Determination of surface area — Surfactant adsorption methods,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la surface spécifique — Méthodes par adsorption de CTAB,1985-09-12,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[13318],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6811:1983 - **Identifier:** ISO 6811:1983 _(verified: appears in the quote below)_ - **Item title:** Spherical plain bearings — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6811:1998 - **Withdrawn / published date:** 1983-05-01 _(verified: appears in the quote below)_ > 13319,IS,,ISO 6811:1983,Spherical plain bearings — Vocabulary,Rotules lisses — Vocabulaire,1983-05-01,1,"['21.100.10','01.040.21']",ISO/TC 4/SC 7,9599,,[24987],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6813:1981 - **Identifier:** ISO 6813:1981 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Collisions — Terminology _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6813:1998 - **Withdrawn / published date:** 1981-12-01 _(verified: appears in the quote below)_ > 13321,IS,,ISO 6813:1981,Road vehicles — Collisions — Terminology,Véhicules routiers — Collisions — Terminologie,1981-12-01,1,"['43.020','01.040.43']",ISO/TC 22,9599,,[1734],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6814:1983 - **Identifier:** ISO 6814:1983 _(verified: appears in the quote below)_ - **Item title:** Machinery for forestry — Mobile and self-propelled machinery — Identification vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6814:2000 - **Withdrawn / published date:** 1983-02-01 _(verified: appears in the quote below)_ > 13322,IS,,ISO 6814:1983,Machinery for forestry — Mobile and self-propelled machinery — Identification vocabulary,Matériel forestier — Machines mobiles et automotrices — Vocabulaire pour l'identification,1983-02-01,1,"['65.060.80','01.040.65']",ISO/TC 23/SC 15,9599,,[23020],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6814:2000 - **Identifier:** ISO 6814:2000 _(verified: appears in the quote below)_ - **Item title:** Machinery for forestry — Mobile and self-propelled machinery — Terms, definitions and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6814:2009 - **Withdrawn / published date:** 2000-05-04 _(verified: appears in the quote below)_ > 23020,IS,,ISO 6814:2000,"Machinery for forestry — Mobile and self-propelled machinery — Terms, definitions and classification","Matériel forestier — Machines mobiles et automotrices — Termes, définitions et classification",2000-05-04,2,"['65.060.80','01.040.65']",ISO/TC 23/SC 15,9599,[13322],[50880],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6816:1984 - **Identifier:** ISO 6816:1984 _(verified: appears in the quote below)_ - **Item title:** Machinery for forestry — Winches — Classification and nomenclature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19472:2006 - **Withdrawn / published date:** 1984-09-01 _(verified: appears in the quote below)_ > 13324,IS,,ISO 6816:1984,Machinery for forestry — Winches — Classification and nomenclature,Matériel forestier — Treuils — Classification et nomenclature,1984-09-01,1,"['65.060.80','01.040.65']",ISO/TC 23/SC 15,9599,,[32862],"['en','fr']",4,"
Establishes the classification of the major types of winches and rope anchors and the nomenclature for major components and parts peculiar to these machines. Examples used here are not intended to include all existing commercial machines nor to be descriptive of any particular machine. Applies to winches attached to machines used in forestry operations, for example on skidders. Specifically excluded are winches used for hoisting operations on cranes, d Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6816:1984/Cor 1:1990 - **Identifier:** ISO 6816:1984/Cor 1:1990 _(verified: appears in the quote below)_ - **Item title:** Machinery for forestry — Winches — Classification and nomenclature — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 19472:2006 - **Withdrawn / published date:** 1990-09-13 _(verified: appears in the quote below)_ > 13325,IS,Cor,ISO 6816:1984/Cor 1:1990,Machinery for forestry — Winches — Classification and nomenclature — Technical Corrigendum 1,Matériel forestier — Treuils — Classification et nomenclature — Rectificatif technique 1,1990-09-13,1,"['65.060.80','01.040.65']",ISO/TC 23/SC 15,9599,,[32862],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6817:1992 - **Identifier:** ISO 6817:1992 _(verified: appears in the quote below)_ - **Item title:** Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 6817 | ISO 20456:2017 - **Withdrawn / published date:** 1992-12-03 _(verified: appears in the quote below)_ > 13328,IS,,ISO 6817:1992,Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters,Mesure de débit d'un fluide conducteur dans les conduites fermées — Méthode par débitmètres électromagnétiques,1992-12-03,1,['17.120.10'],ISO/TC 30/SC 5,9599,,"[56021,68092]","['en','fr']",18,"
Describes the principle and main design features of industrial electromagnetic flowmeters (both a.c. and pulsed d.c. versions) for the measurement of flow-rate in a closed conduit running full. Covers their installation, operation, performance and calibration.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6821:1981 - **Identifier:** ISO 6821:1981 _(verified: appears in the quote below)_ - **Item title:** Greenhouse tomatoes — Guide to refrigerated transport _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5524:1991 - **Withdrawn / published date:** 1981-08-01 _(verified: appears in the quote below)_ > 13330,IS,,ISO 6821:1981,Greenhouse tomatoes — Guide to refrigerated transport,Tomates forcées — Guide pour le transport réfrigéré,1981-08-01,1,['67.080.20'],ISO/TC 34,9599,,[11580],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6826:1982 - **Identifier:** ISO 6826:1982 _(verified: appears in the quote below)_ - **Item title:** Reciprocating internal combustion engines — Fire protection _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6826:1997 - **Withdrawn / published date:** 1982-01-01 _(verified: appears in the quote below)_ > 13333,IS,,ISO 6826:1982,Reciprocating internal combustion engines — Fire protection,Moteurs alternatifs à combustion interne — Protection contre l'incendie,1982-01-01,1,['27.020'],ISO/TC 70,9599,,[13334],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6826:1997 - **Identifier:** ISO 6826:1997 _(verified: appears in the quote below)_ - **Item title:** Reciprocating internal combustion engines — Fire protection _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6826:2022 - **Withdrawn / published date:** 1997-02-13 _(verified: appears in the quote below)_ > 13334,IS,,ISO 6826:1997,Reciprocating internal combustion engines — Fire protection,Moteurs alternatifs à combustion interne — Protection contre l'incendie,1997-02-13,2,['27.020'],ISO/TC 70,9599,[13333],[80106],"['en','fr']",8,"Gives requirements for reciprocating internal combustion engines to minimize the risk of fire caused by the engine and the auxiliaries related to it. Applies to all reciprocating internal combustion engines for land vehicles, rail-traction and marine use, excluding engines used to propel agricultural tractors, road vehicles, road construction and earth-moving machines and aircraft.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-1:1987 - **Identifier:** ISO 683-1:1987 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-1:2012 | ISO 683-2:2012 - **Withdrawn / published date:** 1987-03-26 _(verified: appears in the quote below)_ > 4854,IS,,ISO 683-1:1987,"Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 1: Aciers corroyés non alliés et faiblement alliés à durcissement par trempe directe se présentant sous la forme de différents produits noirs",1987-03-26,1,"['77.140.10','77.140.45','77.140.20']",ISO/TC 17/SC 4,9599,"[4857,4861,4858,4855,4859,4860,4856]","[54173,54174]","['en','fr']",33,"Gives the technical delivery requirements for blooms, billets, slabs, bars, wire rod, hot-rolled plates and forgings manufactured from Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-1:2012 - **Identifier:** ISO 683-1:2012 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering· _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-1:2016 - **Withdrawn / published date:** 2012-09-20 _(verified: appears in the quote below)_ > 54173,IS,,ISO 683-1:2012,"Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering·","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 1: Aciers non alliés pour trempe et revenu",2012-09-20,2,"['77.140.10','77.140.45','77.140.20']",ISO/TC 17/SC 4,9599,[4854],[70642],['en'],39,"
ISO 683-1:2012 specifies the technical delivery requirements for semi-finished products, hot formed (e.g. blooms, billets, slabs), bars, wire rod, finished flat products and hammer or drop forgings manufactured from the direct hardening non-alloy steels and the non-alloy flame and induction hardening steels listed (in Table Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-10:1975 - **Identifier:** ISO 683-10:1975 _(verified: appears in the quote below)_ - **Item title:** Heat-treated steels, alloy steels and free-cutting steels — Part 10: Wrought nitriding steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-10:1987 - **Withdrawn / published date:** 1975-08-01 _(verified: appears in the quote below)_ > 4864,IS,,ISO 683-10:1975,"Heat-treated steels, alloy steels and free-cutting steels — Part 10: Wrought nitriding steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 10: Aciers corroyés pour nitruration",1975-08-01,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,,[4865],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-10:1987 - **Identifier:** ISO 683-10:1987 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 10: Wrought nitriding steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-5:2014 - **Withdrawn / published date:** 1987-03-26 _(verified: appears in the quote below)_ > 4865,IS,,ISO 683-10:1987,"Heat-treatable steels, alloy steels and free-cutting steels — Part 10: Wrought nitriding steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 10: Aciers corroyés pour nitruration",1987-03-26,2,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[4864],[63491],"['en','fr']",14,"
This second edition cancels and replaces the first edition (ISO 683-10:1975). Gives the technical delivery requirements for blooms, billets, slabs, bars, wire rod, hot-rolled plates and forgings manufactured from the nitriding steels listed in table 3 and supplied in one of the heat-treatment conditions given in table 1 and in one of the surface condition Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-11:1987 - **Identifier:** ISO 683-11:1987 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Wrought case-hardening steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-11:2012 - **Withdrawn / published date:** 1987-03-26 _(verified: appears in the quote below)_ > 4867,IS,,ISO 683-11:1987,"Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Wrought case-hardening steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 11: Aciers corroyés pour cémentation",1987-03-26,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,,[53663],"['en','fr']",18,"
Gives the technical delivery requirements for blooms, billets, slabs, bars, wire rod, hot-rolled plates and forgings manufactured from the case-hardening unalloyed or low alloyed steels listed in table 3 and supplied in one of the heat-treatment conditions given in table 1 and in one of the surface conditions given in table 2. The steels are in general int Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-11:2012 - **Identifier:** ISO 683-11:2012 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Case-hardening steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-3:2014 - **Withdrawn / published date:** 2012-09-20 _(verified: appears in the quote below)_ > 53663,IS,,ISO 683-11:2012,"Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Case-hardening steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 11: Aciers pour cémentation",2012-09-20,2,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[4867],[65531],['en'],25,"
ISO 683-11:2012 specifies the technical delivery requirements for semi-finished products, hot formed, (e.g. blooms, billets, slabs), bars, wire rod, finished flat products and hammer or drop forgings manufactured from the case-hardening non-alloy or alloy steels listed (in Table 3) and supplied in one of the heat-treatment conditions given for the different types of produc Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-13:1974 - **Identifier:** ISO 683-13:1974 _(verified: appears in the quote below)_ - **Item title:** Heat-treated steels, alloy steels and free-cutting steels — Part 13: Wrought stainless steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-13:1986 - **Withdrawn / published date:** 1974-04-01 _(verified: appears in the quote below)_ > 4869,IS,,ISO 683-13:1974,"Heat-treated steels, alloy steels and free-cutting steels — Part 13: Wrought stainless steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 13: Aciers corroyés inoxydables",1974-04-01,1,['77.140.20'],ISO/TC 17/SC 4,9599,,[4870],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-14:1973 - **Identifier:** ISO 683-14:1973 _(verified: appears in the quote below)_ - **Item title:** Heat-treated steels, alloy steels and free-cutting steels — Part 14: Steels for hot-formed and heat-treated springs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-14:1992 - **Withdrawn / published date:** 1973-06-01 _(verified: appears in the quote below)_ > 4871,IS,,ISO 683-14:1973,"Heat-treated steels, alloy steels and free-cutting steels — Part 14: Steels for hot-formed and heat-treated springs","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 14: Aciers pour ressorts formés à chaud et traités thermiquement",1973-06-01,1,['77.140.25'],ISO/TC 17/SC 4,9599,,[4872],['en'],13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-14:1992 - **Identifier:** ISO 683-14:1992 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-14:2004 - **Withdrawn / published date:** 1992-08-12 _(verified: appears in the quote below)_ > 4872,IS,,ISO 683-14:1992,"Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 14: Aciers laminés à chaud pour ressorts trempés et revenus",1992-08-12,2,['77.140.25'],ISO/TC 17/SC 4,9599,[4871],[30944],"['en','fr']",20,"
Gives requirements of delivery for round and flat bars and wire rods manufactured from certain alloyed steels intended for hot-formed and subsequently heat-treated springs or cold formed and subsequently heat-treated springs. In addition, the general technical delivery requirements of ISO 404 are applicable. Annex A giv Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-14:2004 - **Identifier:** ISO 683-14:2004 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-6:2023 - **Withdrawn / published date:** 2004-01-13 _(verified: appears in the quote below)_ > 30944,IS,,ISO 683-14:2004,"Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 14: Aciers laminés à chaud pour ressorts trempés et revenus",2004-01-13,3,['77.140.25'],ISO/TC 17/SC 4,9599,[4872],[84278],"['en','fr']",22,
ISO 683-14:2004 gives the technical delivery requirements for round and flat bars and wire rods manufactured from alloyed steels intended for hot-formed and subsequently heat-treated springs or cold-formed and subsequently heat-treated springs.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-15:1976 - **Identifier:** ISO 683-15:1976 _(verified: appears in the quote below)_ - **Item title:** Heat-treated steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-15:1992 - **Withdrawn / published date:** 1976-04-01 _(verified: appears in the quote below)_ > 4873,IS,,ISO 683-15:1976,"Heat-treated steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 15: Aciers pour soupapes de moteurs à combustion interne",1976-04-01,1,"['77.140.10','27.020','77.140.20']",ISO/TC 17/SC 4,9599,,[4874],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-17:1976 - **Identifier:** ISO 683-17:1976 _(verified: appears in the quote below)_ - **Item title:** Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-17:1999 - **Withdrawn / published date:** 1976-06-01 _(verified: appears in the quote below)_ > 4876,IS,,ISO 683-17:1976,"Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 17: Aciers pour roulements",1976-06-01,1,"['77.140.10','21.100.20','77.140.20']",ISO/TC 17/SC 4,9599,,[24696],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-17:1999 - **Identifier:** ISO 683-17:1999 _(verified: appears in the quote below)_ - **Item title:** Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-17:2014 - **Withdrawn / published date:** 1999-10-21 _(verified: appears in the quote below)_ > 24696,IS,,ISO 683-17:1999,"Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 17: Aciers pour roulements",1999-10-21,2,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[4876],[57231],"['en','fr']",20, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-17:2014 - **Identifier:** ISO 683-17:2014 _(verified: appears in the quote below)_ - **Item title:** Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-17:2023 - **Withdrawn / published date:** 2014-10-15 _(verified: appears in the quote below)_ > 57231,IS,,ISO 683-17:2014,"Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 17: Aciers pour roulements",2014-10-15,3,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[24696],[83628],"['en','fr']",25,"ISO 683-17:2014 specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels: through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr), case-hardening bearing steels, induction-hardening bearing steels (unalloyed and alloyed), stainless bearing steels, and high-temperature bearing steels.
" 572 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-18:1976 - **Identifier:** ISO 683-18:1976 _(verified: appears in the quote below)_ - **Item title:** Heat-treated steels, alloy steels and free-cutting steels — Part 18: Wrought unalloyed steels in the normalized, or normalized and cold-drawn, or hot-rolled and cold-drawn condition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-18:1996 - **Withdrawn / published date:** 1976-06-01 _(verified: appears in the quote below)_ > 4877,IS,,ISO 683-18:1976,"Heat-treated steels, alloy steels and free-cutting steels — Part 18: Wrought unalloyed steels in the normalized, or normalized and cold-drawn, or hot-rolled and cold-drawn condition","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 18: Aciers corroyés non alliés normalisés, ou normalisés et étirés à froid, ou laminés à chaud et étirés à froid",1976-06-01,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,,[4878],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-18:1996 - **Identifier:** ISO 683-18:1996 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free- cutting steels — Part 18: Bright products of unalloyed and low alloy steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-18:2014 - **Withdrawn / published date:** 1996-12-26 _(verified: appears in the quote below)_ > 4878,IS,,ISO 683-18:1996,"Heat-treatable steels, alloy steels and free- cutting steels — Part 18: Bright products of unalloyed and low alloy steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 18: Produits blancs en aciers non alliés et faiblement alliés",1996-12-26,2,"['77.140.10','77.140.45','77.140.20']",ISO/TC 17/SC 4,9599,[4877],[59954],"['en','fr']",36,"Applies to wrought unalloyed and alloyed steels in the form of bright products which are intended for mechanical purposes, for example machine parts. Contains general requirements and tests, case-hardening steels, steels for quenching and tempering. Replaces the first edition.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-18:2014 - **Identifier:** ISO 683-18:2014 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16143-4:2023 | ISO 683-7:2023 - **Withdrawn / published date:** 2014-09-04 _(verified: appears in the quote below)_ > 59954,IS,,ISO 683-18:2014,"Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 18: Produits en aciers transformés à froid",2014-09-04,3,"['77.140.10','77.140.45','77.140.20']",ISO/TC 17/SC 4,9599,[4878],"[84518,84523]",['en'],59,"ISO 683-18:2014 specifies the technical delivery requirements for bright steel bars in the drawn or peeled/turned condition and they are intended for mechanical purposes, for example for machine parts. The bright bars are subdivided into the following steel types:
a) non-alloy general engineering steels;
b) non-alloy fre Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-2:2012 - **Identifier:** ISO 683-2:2012 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-2:2016 - **Withdrawn / published date:** 2012-09-20 _(verified: appears in the quote below)_ > 54174,IS,,ISO 683-2:2012,"Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 2: Aciers alliés pour trempe et revenu",2012-09-20,1,"['77.140.10','77.140.45','77.140.20']",ISO/TC 17/SC 4,9599,"[4854,19568]",[70643],['en'],42,"
ISO 683-2:2012 specifies the technical delivery requirements for semi-finished products, hot formed (e.g. blooms, billets, slabs), bars, wire rod, finished flat products and hammer or drop forgings manufactured from the direct-hardening alloy steels and the alloy flame and induction hardening steels listed (in Table 3) and su Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-3:2014 - **Identifier:** ISO 683-3:2014 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-3:2016 - **Withdrawn / published date:** 2014-11-05 _(verified: appears in the quote below)_ > 65531,IS,,ISO 683-3:2014,"Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 3: Aciers pour cémentation",2014-11-05,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[53663],[70644],['en'],36,"
ISO 683-3:2014 specifies the technical delivery requirements for semi-finished products, hot formed, e.g. blooms, billets, slabs, for bars, wire rod, finished flat products, and hammer or drop forgings manufactured from case-hardening non-alloy or alloy steels and supplied in one of the heat-treatment conditions given for the different types of products and in one of the sur Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-3:2016 - **Identifier:** ISO 683-3:2016 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-3:2019 - **Withdrawn / published date:** 2016-07-04 _(verified: appears in the quote below)_ > 70644,IS,,ISO 683-3:2016,"Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 3: Aciers pour cémentation",2016-07-04,2,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[65531],[76389],"['en','fr']",35,"
ISO 683-3:2016 specifies the technical delivery requirements for
- semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
- bars (see Note 1),
- wire rod,
- finished flat products, and
- hammer or drop forgings (see Note 1)
manufactured from the case-hardening non-alloy or alloy steels Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-3:2019 - **Identifier:** ISO 683-3:2019 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-3:2022 - **Withdrawn / published date:** 2019-01-15 _(verified: appears in the quote below)_ > 76389,IS,,ISO 683-3:2019,"Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 3: Aciers pour cémentation",2019-01-15,3,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[70644],[78216],"['en','fr']",36,"
This document specifies the technical delivery requirements for
— semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTE 1),
— bars (see NOTE 1),
— wire rod,
— finished flat products, and
— hammer or drop forgings (see NOTE 1)
manufactured from the case-hardening non-al Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-4:2014 - **Identifier:** ISO 683-4:2014 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-4:2016 - **Withdrawn / published date:** 2014-07-25 _(verified: appears in the quote below)_ > 61773,IS,,ISO 683-4:2014,"Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 4: Aciers pour décolletage",2014-07-25,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[4863],[70645],['en'],21,"
ISO 683-4:2014 gives the technical delivery requirements for semi-finished products (e.g. blooms, billets, slabs), bars, and wire rod, manufactured from free-cutting steels listed and supplied in one of the treatment conditions given for the different types of products. It covers three groups of free-cutting steels for mechanical purposes: not intended for heat treatment, suita Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-5:2014 - **Identifier:** ISO 683-5:2014 _(verified: appears in the quote below)_ - **Item title:** Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-5:2017 - **Withdrawn / published date:** 2014-11-20 _(verified: appears in the quote below)_ > 63491,IS,,ISO 683-5:2014,"Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 5: Aciers pour nitruration",2014-11-20,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[4865],[73273],['en'],27,"
ISO 683-5:2014 gives the technical delivery requirements for semi-finished products (e.g. blooms, billets, slabs), bars, wire rod, hot-rolled plates and hammer or drop forgings manufactured from the nitriding steels and supplied in one of the heat-treatment conditions and surface conditions it specifies. The steels are in general intended for the fabrication of quenched and temper Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 683-9:1988 - **Identifier:** ISO 683-9:1988 _(verified: appears in the quote below)_ - **Item title:** Heat-treatable steels, alloy steels and free-cutting steels — Part 9: Wrought free-cutting steels _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 683-4:2014 - **Withdrawn / published date:** 1988-11-24 _(verified: appears in the quote below)_ > 4863,IS,,ISO 683-9:1988,"Heat-treatable steels, alloy steels and free-cutting steels — Part 9: Wrought free-cutting steels","Aciers pour traitement thermique, aciers alliés et aciers pour décolletage — Partie 9: Aciers corroyés pour décolletage",1988-11-24,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,,[61773],"['en','fr']",14,"
Gives the technical delivery requirements for blooms, billets, slabs, bars, wire rod and bright steel manufactured from the steels listed in table 3 and supplied in one of the heat-treatment conditions given in table 1 and in one of the surface conditions given in table 2. Covers three groups of wrought free-cutting steels for mechanical purposes (not intended Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6831:1986 - **Identifier:** ISO 6831:1986 _(verified: appears in the quote below)_ - **Item title:** Iron ores — Determination of sodium and/or potassium contents — Flame atomic absorption spectrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13312:1997 | ISO 13313:1997 - **Withdrawn / published date:** 1986-09-25 _(verified: appears in the quote below)_ > 13339,IS,,ISO 6831:1986,Iron ores — Determination of sodium and/or potassium contents — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du sodium et/ou du potassium — Méthode par spectrométrie d'absorption atomique dans la flamme,1986-09-25,1,['73.060.10'],ISO/TC 102/SC 2,9599,,"[21682,21683]","['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6841:1983 - **Identifier:** ISO 6841:1983 _(verified: appears in the quote below)_ - **Item title:** Surface active agents — Technical straight-chain sodium alkylbenzenesulphonates — Determination of mean relative molecular mass — Gas-liquid chromatographic method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6841:1988 - **Withdrawn / published date:** 1983-01-01 _(verified: appears in the quote below)_ > 13346,IS,,ISO 6841:1983,Surface active agents — Technical straight-chain sodium alkylbenzenesulphonates — Determination of mean relative molecular mass — Gas-liquid chromatographic method,Agents de surface — Alkylbenzène sulfonates de sodium linéaires techniques — Détermination de la masse moléculaire relative moyenne — Méthode par chromatographie gaz-liquide,1983-01-01,1,['71.100.40'],ISO/TC 91,9599,,[13347],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6842:1983 - **Identifier:** ISO 6842:1983 _(verified: appears in the quote below)_ - **Item title:** Surface active agents — Polyethoxylated alcohol and alkylphenol sulfates — Determination of total active matter content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6842:1989 - **Withdrawn / published date:** 1983-02-01 _(verified: appears in the quote below)_ > 13348,IS,,ISO 6842:1983,Surface active agents — Polyethoxylated alcohol and alkylphenol sulfates — Determination of total active matter content,Agents de surface — Sulfates d'alcools et d'alkylphénols polyéthoxylés — Détermination de la teneur en matière active totale,1983-02-01,1,['71.100.40'],ISO/TC 91,9599,,[13349],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6845:1982 - **Identifier:** ISO 6845:1982 _(verified: appears in the quote below)_ - **Item title:** Surface active agents — Technical alkane sulphonates — Determination of mean relative molecular mass of alkane monosulphonates _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6845:1989 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 13352,IS,,ISO 6845:1982,Surface active agents — Technical alkane sulphonates — Determination of mean relative molecular mass of alkane monosulphonates,Agents de surface — Alcanesulfonates techniques — Détermination de la masse moléculaire relative moyenne des alcanemonosulfonates,1982-12-01,1,['71.100.40'],ISO/TC 91,9599,,[13353],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6846:1983 - **Identifier:** ISO 6846:1983 _(verified: appears in the quote below)_ - **Item title:** Photography — Black-and-white continuous-tone papers — Determination of ISO speed and range for printing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6846:1992 - **Withdrawn / published date:** 1983-12-01 _(verified: appears in the quote below)_ > 13354,IS,,ISO 6846:1983,Photography — Black-and-white continuous-tone papers — Determination of ISO speed and range for printing,Photographie — Papiers noir et blanc pour images à tons continus — Détermination de la sensibilité ISO et de l'étendue ISO,1983-12-01,1,['37.040.20'],ISO/TC 42,9599,,[13355],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6847:1985 - **Identifier:** ISO 6847:1985 _(verified: appears in the quote below)_ - **Item title:** Covered electrodes for manual metal arc welding — Deposition of a weld metal pad for chemical analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6847:2000 - **Withdrawn / published date:** 1985-11-07 _(verified: appears in the quote below)_ > 13356,IS,,ISO 6847:1985,Covered electrodes for manual metal arc welding — Deposition of a weld metal pad for chemical analysis,Électrodes enrobées pour soudage manuel à l'arc — Exécution d'un dépôt de métal fondu en vue de l'analyse chimique,1985-11-07,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[27285],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6847:2000 - **Identifier:** ISO 6847:2000 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Deposition of a weld metal pad for chemical analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6847:2013 - **Withdrawn / published date:** 2000-03-23 _(verified: appears in the quote below)_ > 27285,IS,,ISO 6847:2000,Welding consumables — Deposition of a weld metal pad for chemical analysis,Produits consommables pour le soudage — Exécution d'un dépôt de métal fondu pour l'analyse chimique,2000-03-23,2,['25.160.20'],IIW,9599,[13356],[61769],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6847:2013 - **Identifier:** ISO 6847:2013 _(verified: appears in the quote below)_ - **Item title:** Welding consumables — Deposition of a weld metal pad for chemical analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6847:2020 - **Withdrawn / published date:** 2013-06-05 _(verified: appears in the quote below)_ > 61769,IS,,ISO 6847:2013,Welding consumables — Deposition of a weld metal pad for chemical analysis,Produits consommables pour le soudage — Exécution d'un dépôt de métal fondu pour l'analyse chimique,2013-06-05,3,['25.160.20'],IIW,9599,[27285],[78340],"['en','fr']",4,"
ISO 6847:2013 specifies the procedure to be used for deposition of a weld metal pad for chemical analysis. ISO 6847:2013 applies to deposition of a weld metal pad by use of covered electrodes, wire electrodes for gas shielded metal arc welding, tubular cored electrodes for gas shielded metal arc welding and for non-gas shielded metal arc welding, tubular cored rods for gas tungsten arc welding, and wire-flux combinations for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6848:1984 - **Identifier:** ISO 6848:1984 _(verified: appears in the quote below)_ - **Item title:** Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding — Codification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6848:2004 | ISO/DIS 6848 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 13357,IS,,ISO 6848:1984,"Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding — Codification","Électrodes de tungstène pour soudage à l'arc en atmosphère inerte, et pour soudage et coupage plasma — Codification",1984-12-01,1,['25.160.20'],ISO/TC 44/SC 3,9599,,"[40551,32144]","['en','fr']",4,"
Tungsten electrodes may contain oxide additives to improve the emission characteristics. The chemical composition of these electrodes shall be in accordance with the requirements given in this standard. The codification of tungsten electrodes is based on their chemical composition. Covers designation, marking, technical delivery conditions and, in an annex, condit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6848:2004 - **Identifier:** ISO 6848:2004 _(verified: appears in the quote below)_ - **Item title:** Arc welding and cutting — Nonconsumable tungsten electrodes — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6848:2015 - **Withdrawn / published date:** 2004-12-03 _(verified: appears in the quote below)_ > 40551,IS,,ISO 6848:2004,Arc welding and cutting — Nonconsumable tungsten electrodes — Classification,Soudage et coupage à l'arc — Électrodes non consommables en tungstène — Classification,2004-12-03,2,['25.160.20'],ISO/TC 44/SC 3,9599,[13357],[64570],"['en','fr']",8,"
ISO 6848:2004 specifies requirements for classification of nonconsumable tungsten electrodes for inert gas shielded arc welding, and for plasma welding, cutting and thermal spraying.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 685:1975 - **Identifier:** ISO 685:1975 _(verified: appears in the quote below)_ - **Item title:** Analysis of soaps — Determination of total alkali content and total fatty matter content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 685:2020 - **Withdrawn / published date:** 1975-10-01 _(verified: appears in the quote below)_ > 4880,IS,,ISO 685:1975,Analysis of soaps — Determination of total alkali content and total fatty matter content,Analyse des savons — Détermination des teneurs en alcali total et en matière grasse totale,1975-10-01,1,['71.100.40'],ISO/TC 91,9599,[4477],[69675],"['en','fr']",3,"The method consists in decomposition of the soap by a known volume of standard volumetric mineral acid solution, extraction and separation of the liberated fatty matter with light petroleum and determination of a total alkali content by titration of the excess of acid contained in the aqueous phase with a standard volumetric sodium hydroxide solution. After evaporation of the light petroleum from the extract, dissolut Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6851:1987 - **Identifier:** ISO 6851:1987 _(verified: appears in the quote below)_ - **Item title:** Photography — Processing waste — Determination of total amino nitrogen — Microdiffusion Kjeldahl method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6851:2001 | ISO/DIS 6851 - **Withdrawn / published date:** 1987-11-26 _(verified: appears in the quote below)_ > 13360,IS,,ISO 6851:1987,Photography — Processing waste — Determination of total amino nitrogen — Microdiffusion Kjeldahl method,Photographie — Effluents de traitements — Détermination de l'azote amino total — Méthode de microdiffusion Kjeldahl,1987-11-26,1,"['37.040.30','13.030.30']",ISO/TC 42,9599,,"[32493,27566]","['en','fr']",4,
Describes a method for determining the total organic nitrogen and any ammoniacal nitrogen present in photographic processing waste. This amino nitrogen is converted to ammonia which is subsequently determined by absorption into boric acid in a microdiffusion cell along with any ammonia originally present.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6853:1987 - **Identifier:** ISO 6853:1987 _(verified: appears in the quote below)_ - **Item title:** Photography — Processing waste — Determination of ammoniacal nitrogen content — Microdiffusion method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6853:2001 | ISO/DIS 6853 - **Withdrawn / published date:** 1987-11-26 _(verified: appears in the quote below)_ > 13362,IS,,ISO 6853:1987,Photography — Processing waste — Determination of ammoniacal nitrogen content — Microdiffusion method,Photographie — Effluents de traitements — Détermination de la teneur en azote ammoniacal — Méthode par microdiffusion,1987-11-26,1,"['37.040.30','13.030.30']",ISO/TC 42,9599,,"[32494,20059]","['en','fr']",3,Specifies a method for determining ammonia and other volatile amines that can be liberated by strong alkali from photographic processing wastes. The method is applicable in the range 10 to 200 mg/l of NH3 or 8 to 160 mg/l of nitrogen.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6855:1983 - **Identifier:** ISO 6855:1983 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6855-2:2012 | ISO 6855-3:2012 | ISO 6855-1:2012 - **Withdrawn / published date:** 1983-10-01 _(verified: appears in the quote below)_ > 13364,IS,,ISO 6855:1983,Road vehicles — Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine,Véhicules routiers — Méthodes de mesurage des émissions de gaz polluants par les cyclomoteurs équipés de moteurs à allumage commandé,1983-10-01,1,"['43.140','13.040.50']",ISO/TC 22,9599,,"[55401,55402,55400]","['en','fr']",13,"Specifies methods of measurement for gaseous pollutants emitted by mopeds as defined in ISO 3833, equipped with a 4-stroke, a 2-stroke or a rotary controlled ignition engine. Defines a driving cycle in accordance with the requirements of different types of mopeds and provides specifications of the collecting methods for gase Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6856:1981 - **Identifier:** ISO 6856:1981 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6856:1990 - **Withdrawn / published date:** 1981-03-01 _(verified: appears in the quote below)_ > 13365,IS,,ISO 6856:1981,Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods,Véhicules routiers — Assemblages de câble d'allumage haute tension non blindé — Spécifications générales et méthodes d'essai,1981-03-01,1,['43.060.50'],ISO/TC 22,9599,,[13366],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6856:1990 - **Identifier:** ISO 6856:1990 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6856:2005 | ISO/WD 6856 - **Withdrawn / published date:** 1990-05-10 _(verified: appears in the quote below)_ > 13366,IS,,ISO 6856:1990,Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods,Véhicules routiers — Assemblages de câbles d'allumage haute tension non blindés — Spécifications générales et méthodes d'essai,1990-05-10,2,['43.060.50'],ISO/TC 22,9599,[13365],"[39884,29432]","['en','fr']",6,
Applies to all types of unscreened ignition cable assemblies used in road vehicle applications. Annex A (for information only) shows the test apparatus for sealing test. Some figures illustrate shapes and reference quantities of concern. This second edition cancels and replaces the first edition (1981).
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6858:1982 - **Identifier:** ISO 6858:1982 _(verified: appears in the quote below)_ - **Item title:** Aircraft — Ground support electrical supplies — General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6858:2017 | ISO/WD 6858 - **Withdrawn / published date:** 1982-08-01 _(verified: appears in the quote below)_ > 13367,IS,,ISO 6858:1982,Aircraft — Ground support electrical supplies — General requirements,Aéronefs — Alimentations électriques de service au sol des avions — Conditions générales requises,1982-08-01,1,"['49.100','49.060']",ISO/TC 20/SC 1,9599,[4095],"[64893,38144]","['en','fr']",7,"Gives electrical output characteristics, and interface requirements, between an aircraft and ground support electrical supplies. Requirements for safety features are also included. The facilities covered by this International Standard are intended to supply power to an aircraft. In some cases the facility may also be capable of being used for aircraft engine starting.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6860:1984 - **Identifier:** ISO 6860:1984 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Bend test (conical mandrel) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6860:2006 - **Withdrawn / published date:** 1984-05-01 _(verified: appears in the quote below)_ > 13373,IS,,ISO 6860:1984,Paints and varnishes — Bend test (conical mandrel),Peintures et vernis — Essai de pliage (mandrin conique),1984-05-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[36934],"['en','fr']",3,"Is one of four documents which specify empirical test procedures for assessing the resistance of coating films to cracking and/or detachment from the substrate under different conditions of deformation. Describes a test procedure for coating on a metallic substrate when subjected to bending under standard conditions. For a multi-coat system, each coat may be tested separately or the complete system may be tested. The mandrel shall be in the form of a truncated cone. It is mounted horizontall Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6864:1984 - **Identifier:** ISO 6864:1984 _(verified: appears in the quote below)_ - **Item title:** Plain bearings — Thin-walled flanged half bearings — Dimensions, tolerances and methods of checking _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3548:1999 - **Withdrawn / published date:** 1984-03-01 _(verified: appears in the quote below)_ > 13376,IS,,ISO 6864:1984,"Plain bearings — Thin-walled flanged half bearings — Dimensions, tolerances and methods of checking","Paliers lisses — Demi-coussinets minces à collerettes — Dimensions, tolérances et méthodes de contrôle",1984-03-01,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[8943],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 687:1974 - **Identifier:** ISO 687:1974 _(verified: appears in the quote below)_ - **Item title:** Coke — Determination of moisture in the analysis sample _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 687:2004 - **Withdrawn / published date:** 1974-10-01 _(verified: appears in the quote below)_ > 4884,IS,,ISO 687:1974,Coke — Determination of moisture in the analysis sample,Coke — Détermination de l'humidité de l'échantillon pour analyse,1974-10-01,1,['75.160.10'],ISO/TC 27/SC 5,9599,,[36477],"['en','fr']",2,
A known mass of the coke is heated in air at a temperature between 190 and 210 °C and maintained at this temperature until constant in mass. The percentage moisture content is calculated from the loss in mass of the coke.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 687:2004 - **Identifier:** ISO 687:2004 _(verified: appears in the quote below)_ - **Item title:** Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 687:2010 - **Withdrawn / published date:** 2004-09-03 _(verified: appears in the quote below)_ > 36477,IS,,ISO 687:2004,Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample,Combustibles mineraux solides — Coke — Détermination de l'humidité de l'échantillon pour analyse,2004-09-03,2,['75.160.10'],ISO/TC 27/SC 5,9599,[4884],[55945],['en'],3,"ISO 687:2004 specifies a method for determining the moisture in the general analysis test sample of coke. ISO 687:2004 can be used for the determination of moisture in blast furnace coke, foundry-coke and other high-temperature carbonization products.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 687:2010 - **Identifier:** ISO 687:2010 _(verified: appears in the quote below)_ - **Item title:** Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 687:2024 - **Withdrawn / published date:** 2010-06-04 _(verified: appears in the quote below)_ > 55945,IS,,ISO 687:2010,Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample,Combustibles mineraux solides — Coke — Détermination de l'humidité de l'échantillon pour analyse,2010-06-04,3,['75.160.10'],ISO/TC 27/SC 5,9599,[36477],[86497],['en'],3,"ISO 687:2010 specifies a method for determining the moisture in the general analysis test sample of coke. ISO 687:2010 can be used for the determination of moisture in blast-furnace coke, foundry-coke and other high-temperature carbonization products.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6870:1985 - **Identifier:** ISO 6870:1985 _(verified: appears in the quote below)_ - **Item title:** Animal feeding stuffs — Determination of zearalenone content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6870:2002 | ISO/DIS 6870 - **Withdrawn / published date:** 1985-11-14 _(verified: appears in the quote below)_ > 13384,IS,,ISO 6870:1985,Animal feeding stuffs — Determination of zearalenone content,Aliments des animaux — Dosage de la zéaralénone,1985-11-14,1,['65.120'],ISO/TC 34/SC 10,9599,,"[35571,13385]","['en','fr']",5,"The limit of determination is approximately 50 micro-gram/kg. The method consists in extracting of a test portion with a mixture of acetonitrile and potassium chloride solution, filtrating, defatting, purifying, filtrating again, extracting into chloroform which is subsequently evaporated. Dissolution of the dry extract in a mixture of benzene and acetonitrile and thin layer chromatography. Determination by visual measurement or by measurement of the intensity of fluorescence unde Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6871-1:1994 - **Identifier:** ISO 6871-1:1994 _(verified: appears in the quote below)_ - **Item title:** Dental base metal casting alloys — Part 1: Cobalt-based alloys _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 22674:2006 - **Withdrawn / published date:** 1994-09-15 _(verified: appears in the quote below)_ > 13387,IS,,ISO 6871-1:1994,Dental base metal casting alloys — Part 1: Cobalt-based alloys,Alliages dentaires non précieux à couler — Partie 1: Alliages à base de cobalt,1994-09-15,1,['11.060.10'],ISO/TC 106/SC 2,9599,[13386],[36412],"['en','fr']",6,
Specifies requirements and test methods for cobalt-based dental casting alloys suitable for use in fabrication of removable dental appliances. Does not apply to alloys intended for use in fabrication of metal-ceramic dental restorations.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6871-1:1994/Amd 1:2005 - **Identifier:** ISO 6871-1:1994/Amd 1:2005 _(verified: appears in the quote below)_ - **Item title:** Dental base metal casting alloys — Part 1: Cobalt-based alloys — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 22674:2006 - **Withdrawn / published date:** 2005-07-08 _(verified: appears in the quote below)_ > 40005,IS,Amd,ISO 6871-1:1994/Amd 1:2005,Dental base metal casting alloys — Part 1: Cobalt-based alloys — Amendment 1,Alliages dentaires non précieux à couler — Partie 1: Alliages à base de cobalt — Amendement 1,2005-07-08,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[36412],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6871-1:1994/Cor 1:1998 - **Identifier:** ISO 6871-1:1994/Cor 1:1998 _(verified: appears in the quote below)_ - **Item title:** Dental base metal casting alloys — Part 1: Cobalt-based alloys — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 22674:2006 - **Withdrawn / published date:** 1998-08-20 _(verified: appears in the quote below)_ > 30885,IS,Cor,ISO 6871-1:1994/Cor 1:1998,Dental base metal casting alloys — Part 1: Cobalt-based alloys — Technical Corrigendum 1,Alliages dentaires non précieux à couler — Partie 1: Alliages à base de cobalt — Rectificatif technique 1,1998-08-20,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[36412],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6871:1987 - **Identifier:** ISO 6871:1987 _(verified: appears in the quote below)_ - **Item title:** Dental base metal casting alloys _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6871-1:1994 | ISO 6871-2:1994 - **Withdrawn / published date:** 1987-01-29 _(verified: appears in the quote below)_ > 13386,IS,,ISO 6871:1987,Dental base metal casting alloys,Alliages dentaires non précieux à couler,1987-01-29,1,['11.060.10'],ISO/TC 106/SC 2,9599,,"[13387,22058]","['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6871-2:1994 - **Identifier:** ISO 6871-2:1994 _(verified: appears in the quote below)_ - **Item title:** Dental base metal casting alloys — Part 2: Nickel-based alloys _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 22674:2006 - **Withdrawn / published date:** 1994-09-15 _(verified: appears in the quote below)_ > 22058,IS,,ISO 6871-2:1994,Dental base metal casting alloys — Part 2: Nickel-based alloys,Alliages dentaires non précieux à couler — Partie 2: Alliages à base de nickel,1994-09-15,1,['11.060.10'],ISO/TC 106/SC 2,9599,[13386],[36412],"['en','fr']",7,Specifies requirements and test methods for nickel-based dental casting alloys suitable for use in fabrication of removable dental appliances. Does not apply to alloys intended for use in fabrication of metal-ceramic dental restorations.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6871-2:1994/Amd 1:2005 - **Identifier:** ISO 6871-2:1994/Amd 1:2005 _(verified: appears in the quote below)_ - **Item title:** Dental base metal casting alloys — Part 2: Nickel-based alloys — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 22674:2006 - **Withdrawn / published date:** 2005-07-08 _(verified: appears in the quote below)_ > 40596,IS,Amd,ISO 6871-2:1994/Amd 1:2005,Dental base metal casting alloys — Part 2: Nickel-based alloys — Amendment 1,Alliages dentaires non précieux à couler — Partie 2: Alliages à base de nickel — Amendement 1,2005-07-08,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[36412],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6872:1984 - **Identifier:** ISO 6872:1984 _(verified: appears in the quote below)_ - **Item title:** Dental ceramic _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6872:1995 - **Withdrawn / published date:** 1984-06-01 _(verified: appears in the quote below)_ > 13388,IS,,ISO 6872:1984,Dental ceramic,Céramique dentaire,1984-06-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[13389],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6872:1995 - **Identifier:** ISO 6872:1995 _(verified: appears in the quote below)_ - **Item title:** Dental ceramic _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6872:2008 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 13389,IS,,ISO 6872:1995,Dental ceramic,Céramique dentaire,1995-08-24,2,['11.060.10'],ISO/TC 106/SC 2,9599,[13388],[41385],"['en','fr']",9,"Specifies the requirements and test methods for dental ceramics for all fixed ceramic inlays. Cancels and replaces the first edition, which has been technically revised.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6872:1995/Amd 1:1997 - **Identifier:** ISO 6872:1995/Amd 1:1997 _(verified: appears in the quote below)_ - **Item title:** Dental ceramic — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6872:2008 - **Withdrawn / published date:** 1997-11-27 _(verified: appears in the quote below)_ > 27400,IS,Amd,ISO 6872:1995/Amd 1:1997,Dental ceramic — Amendment 1,Céramique dentaire — Amendement 1,1997-11-27,2,['11.060.10'],ISO/TC 106/SC 2,9599,,[41385],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6872:2008 - **Identifier:** ISO 6872:2008 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Ceramic materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6872:2015 - **Withdrawn / published date:** 2008-08-26 _(verified: appears in the quote below)_ > 41385,IS,,ISO 6872:2008,Dentistry — Ceramic materials,Art dentaire — Produits céramiques,2008-08-26,3,['11.060.10'],ISO/TC 106/SC 2,9599,"[13389,27400]",[59936],"['en','fr']",24,ISO 6872:2008 specifies the requirements and the corresponding test methods for dental ceramic materials for fixed all-ceramic and metal-ceramic restorations and prostheses.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6872:2015 - **Identifier:** ISO 6872:2015 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Ceramic materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 6872 | ISO/PWI 6872 | ISO 6872:2024 - **Withdrawn / published date:** 2015-06-01 _(verified: appears in the quote below)_ > 59936,IS,,ISO 6872:2015,Dentistry — Ceramic materials,Médecine bucco-dentaire — Matériaux céramiques,2015-06-01,4,['11.060.10'],ISO/TC 106/SC 2,9599,[41385],"[70085,79669,81718]","['en','fr']",28,ISO 6872:2015 specifies the requirements and the corresponding test methods for dental ceramic materials for fixed all-ceramic and metal-ceramic restorations and prostheses.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6872:2015/Amd 1:2018 - **Identifier:** ISO 6872:2015/Amd 1:2018 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Ceramic materials — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 6872 | ISO/PWI 6872 | ISO 6872:2024 - **Withdrawn / published date:** 2018-04-23 _(verified: appears in the quote below)_ > 74247,IS,Amd,ISO 6872:2015/Amd 1:2018,Dentistry — Ceramic materials — Amendment 1,Médecine bucco-dentaire — Matériaux céramiques — Amendement 1,2018-04-23,4,['11.060.10'],ISO/TC 106/SC 2,9599,,"[70085,79669,81718]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6873:1983 - **Identifier:** ISO 6873:1983 _(verified: appears in the quote below)_ - **Item title:** Dental gypsum products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6873:1998 - **Withdrawn / published date:** 1983-11-01 _(verified: appears in the quote below)_ > 13390,IS,,ISO 6873:1983,Dental gypsum products,Produits dentaires à base de gypse,1983-11-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[13391],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6873:1998 - **Identifier:** ISO 6873:1998 _(verified: appears in the quote below)_ - **Item title:** Dental gypsum products _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6873:2013 - **Withdrawn / published date:** 1998-03-05 _(verified: appears in the quote below)_ > 13391,IS,,ISO 6873:1998,Dental gypsum products,Produits dentaires à base de gypse,1998-03-05,2,['11.060.10'],ISO/TC 106/SC 2,9599,[13390],[54423],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6874:1988 - **Identifier:** ISO 6874:1988 _(verified: appears in the quote below)_ - **Item title:** Dental resin-based pit and fissure sealants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6874:2005 - **Withdrawn / published date:** 1988-11-03 _(verified: appears in the quote below)_ > 13392,IS,,ISO 6874:1988,Dental resin-based pit and fissure sealants,Produits dentaires à base de résine pour comblement des puits et fissures,1988-11-03,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[36495],"['en','fr']",6,The specified sealant materials harden by free radical polymerization and protect teeth from the formation of caries. This standard covers both chemically cured and externally-energy-cured materials. Specific quantitative and qualitative requirements for freedom from biological hazard are not included.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6874:2005 - **Identifier:** ISO 6874:2005 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Polymer-based pit and fissure sealants _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6874:2015 - **Withdrawn / published date:** 2005-08-29 _(verified: appears in the quote below)_ > 36495,IS,,ISO 6874:2005,Dentistry — Polymer-based pit and fissure sealants,Art dentaire — Produits dentaires à base de polymères pour comblement des puits et fissures,2005-08-29,2,['11.060.10'],ISO/TC 106/SC 1,9599,[13392],[67595],"['en','fr']",8,ISO 6874:2005 specifies requirements and test methods for polymer-based materials intended for sealing pits and fissures in teeth.
ISO 6874:2005 covers both self-cured and external-energy-activated materials.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6875:1988 - **Identifier:** ISO 6875:1988 _(verified: appears in the quote below)_ - **Item title:** Dental patient chair _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6875:1995 - **Withdrawn / published date:** 1988-12-01 _(verified: appears in the quote below)_ > 13393,IS,,ISO 6875:1988,Dental patient chair,Fauteuil dentaire,1988-12-01,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[13394],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6875:1995 - **Identifier:** ISO 6875:1995 _(verified: appears in the quote below)_ - **Item title:** Dental patient chair _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6875:2011 - **Withdrawn / published date:** 1995-01-26 _(verified: appears in the quote below)_ > 13394,IS,,ISO 6875:1995,Dental patient chair,Fauteuil dentaire,1995-01-26,2,['11.060.20'],ISO/TC 106/SC 6,9599,[13393],[52117],"['en','fr']",11,"Applies to all dental patient chairs, regardless of their construction and also regardless of whether they are operated manually or electrically or by other means, or as a combination of these. Specifies requirements, test methods, manufacturer's information, marking and packaging. Refers to 601-1:1988, but takes priority over specifications in IEC 601-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6875:2011 - **Identifier:** ISO 6875:2011 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Patient chair _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7494-1:2018 - **Withdrawn / published date:** 2011-06-29 _(verified: appears in the quote below)_ > 52117,IS,,ISO 6875:2011,Dentistry — Patient chair,Médecine bucco-dentaire — Fauteuil dentaire,2011-06-29,3,['11.060.20'],ISO/TC 106/SC 6,9599,[13394],[69100],"['en','fr']",8,"ISO 6875:2011 is applicable to all patient chairs, regardless of their construction, and regardless of whether they are operated manually, electrically or by other means, or as a combination of these.
ISO 6875:2011 specifies requirements, test methods, manufacturer's information, marking and packaging.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6876:1986 - **Identifier:** ISO 6876:1986 _(verified: appears in the quote below)_ - **Item title:** Dental root canal sealing materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6876:2001 - **Withdrawn / published date:** 1986-11-27 _(verified: appears in the quote below)_ > 13395,IS,,ISO 6876:1986,Dental root canal sealing materials,Produits dentaires pour le scellement des canaux radiculaires,1986-11-27,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[34965],"['en','fr']",4,Specification of requirements for materials used for permanent abturation of the root canal with or without the aid of obturating points. This standard only covers materials intended for orthograde (root filling inserted from coronal aspect) use. Reference is made to ISO/TR 7405 for requirements that relate to the freedom from toxicity.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6876:2001 - **Identifier:** ISO 6876:2001 _(verified: appears in the quote below)_ - **Item title:** Dental root canal sealing materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6876:2012 - **Withdrawn / published date:** 2001-08-23 _(verified: appears in the quote below)_ > 34965,IS,,ISO 6876:2001,Dental root canal sealing materials,Produits dentaires pour le scellement des canaux radiculaires,2001-08-23,2,['11.060.10'],ISO/TC 106/SC 1,9599,[13395],[45117],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6876:2012 - **Identifier:** ISO 6876:2012 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Root canal sealing materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 6876 | ISO 6876:2025 - **Withdrawn / published date:** 2012-05-31 _(verified: appears in the quote below)_ > 45117,IS,,ISO 6876:2012,Dentistry — Root canal sealing materials,Médecine bucco-dentaire — Matériaux de scellement des canaux radiculaires,2012-05-31,3,['11.060.10'],ISO/TC 106/SC 1,9599,[34965],"[80943,83587]","['en','fr']",9,"ISO 6876:2012 specifies requirements and test methods for root canal (endodontic) sealing materials which set with or without the assistance of moisture and are used for permanent obturation of the root canal with or without the aid of obturating points/cones. It only covers sealers intended for orthograde use, i.e. a root filling placed from the coronal aspect of a tooth.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 6877:1995 - **Identifier:** ISO 6877:1995 _(verified: appears in the quote below)_ - **Item title:** Dental root-canal obturating points _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6877:2006 - **Withdrawn / published date:** 1995-06-01 _(verified: appears in the quote below)_ > 13397,IS,,ISO 6877:1995,Dental root-canal obturating points,Cônes d'obturation dentaires pour canaux radiculaires,1995-06-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[37110],"['en','fr']",10,"Specifies the dimensions and compositional requirements for prefabricated metallic or polymeric-based points or cones suitable for use in the obturation of the dental root-canal, but not for support of a coronal restoration. Also specifies numerical systems and a colour coding system for designating the sizes. Covers the physical attributes expected of such products as supplied.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 149](https://referencesource.org/iso-standard-supersessions/p/149/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 151](https://referencesource.org/iso-standard-supersessions/p/151/) Last verified: 2026-08-05. Review by: 2027-02-02.