ISO 5834-2:2006 specifies the requirements and corresponding test methods for moulded forms (sheets, rods) made from ultra-high-molecular-weight polyethylene (UHMWPE) for use in the manufacture of surgical implants.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5834-2:2011 - **Identifier:** ISO 5834-2:2011 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5834-2:2019 - **Withdrawn / published date:** 2011-08-02 _(verified: appears in the quote below)_ > 55602,IS,,ISO 5834-2:2011,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 2: Produits sous forme moulée,2011-08-02,4,['11.040.40'],ISO/TC 150/SC 1,9599,"[41103,51695]",[73675],"['en','ru']",5,"ISO 5834-2:2011 specifies the requirements and corresponding test methods for moulded forms, e.g. sheets and rods, made from ultra-high-molecular-weight polyethylene (UHMWPE) for use in the manufacture of surgical implants.
ISO 5834-2:2011 is not applicable to direct-moulded (near net shape), irradiated or finished products or products manufactured from polyethylene blended wit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5834-2:2019 - **Identifier:** ISO 5834-2:2019 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5834-2:2025 - **Withdrawn / published date:** 2019-02-12 _(verified: appears in the quote below)_ > 73675,IS,,ISO 5834-2:2019,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 2: Produits sous forme moulée,2019-02-12,5,['11.040.40'],ISO/TC 150/SC 1,9599,[55602],[86079],"['en','fr']",5,"
This document specifies the requirements and corresponding test methods for moulded forms, e.g. sheets and rods, made from ultra-high-molecular-weight polyethylene (UHMWPE) for use in the manufacture of surgical implants.
This document is not applicable to direct-moulded (near net shape), irradiated or finished products or products manufactured from polyethylene blended with additives o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5834-3:2005 - **Identifier:** ISO 5834-3:2005 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5834-3:2019 - **Withdrawn / published date:** 2005-07-20 _(verified: appears in the quote below)_ > 34400,IS,,ISO 5834-3:2005,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 3: Méthodes de vieillissement accéléré,2005-07-20,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[73676],"['en','fr','ru']",4,"
ISO 5834-3:2005 specifies a test method for investigating the oxidative stability of ultra-high-molecular-weight polyethylene (UHMWPE) materials as a function of processing and sterilization method. ISO 5834-3:2005 describes a laboratory method for accelerated ageing of UHMWPE specimens and components for total joint prostheses. The UHMWPE is aged at elevated temperature a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5834-3:2019 - **Identifier:** ISO 5834-3:2019 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5834-3:2025 - **Withdrawn / published date:** 2019-02-12 _(verified: appears in the quote below)_ > 73676,IS,,ISO 5834-3:2019,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 3: Méthodes de vieillissement accéléré,2019-02-12,2,['11.040.40'],ISO/TC 150/SC 1,9599,[34400],[88635],"['en','fr']",4,"
This document specifies a test method for investigating the oxidative stability of ultra-high-molecular-weight polyethylene (UHMWPE) materials as a function of processing and sterilization method. This document describes a laboratory method for accelerated ageing of UHMWPE specimens and components for total joint prostheses. The UHMWPE is aged at elevated temperature and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5834-4:2005 - **Identifier:** ISO 5834-4:2005 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 4: Oxidation index measurement method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 5834-4 | ISO 5834-4:2019 | ISO/DIS 5834-4 - **Withdrawn / published date:** 2005-05-13 _(verified: appears in the quote below)_ > 34401,IS,,ISO 5834-4:2005,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 4: Oxidation index measurement method,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 4: Méthode de mesurage de l'indice d'oxydation,2005-05-13,1,['11.040.40'],ISO/TC 150/SC 1,9599,,"[63313,73677,54626]","['en','fr']",7,
ISO 5834-4:2005 specifies a method for the measurement of the relative extent of oxidation present in ultra-high molecular weight polyethylene (UHMWPE).
ISO 5834-4:2005 is applicable to ultra-high molecular weight polyethylene (UHMWPE) intended for use in medical implants.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5834-4:2019 - **Identifier:** ISO 5834-4:2019 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 4: Oxidation index measurement method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5834-4:2025 - **Withdrawn / published date:** 2019-02-12 _(verified: appears in the quote below)_ > 73677,IS,,ISO 5834-4:2019,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 4: Oxidation index measurement method,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 4: Méthode de mesurage de l'indice d'oxydation,2019-02-12,2,['11.040.40'],ISO/TC 150/SC 1,9599,[34401],[88636],"['en','fr']",8,This document specifies a method for the measurement of the relative extent of oxidation present in ultra-high molecular weight polyethylene (UHMWPE).
It is applicable to ultra-high molecular weight polyethylene (UHMWPE) intended for use in surgical implants.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5834-5:2005 - **Identifier:** ISO 5834-5:2005 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 5: Morphology assessment method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 5834-5 | ISO 5834-5:2019 - **Withdrawn / published date:** 2005-06-13 _(verified: appears in the quote below)_ > 38207,IS,,ISO 5834-5:2005,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 5: Morphology assessment method,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 5: Méthode d'évaluation de la morphologie,2005-06-13,1,['11.040.40'],ISO/TC 150/SC 1,9599,,"[54627,73678]","['en','fr']",6,"ISO 5834-5:2005 specifies the test method for assessing the morphology of UHMWPE moulded forms, which are described in ISO 5834-2.
It is not applicable to UHMWPE powder forms, which are described in ISO 5834-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5834-5:2019 - **Identifier:** ISO 5834-5:2019 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 5: Morphology assessment method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5834-5:2025 - **Withdrawn / published date:** 2019-02-12 _(verified: appears in the quote below)_ > 73678,IS,,ISO 5834-5:2019,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 5: Morphology assessment method,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 5: Méthode d'évaluation de la morphologie,2019-02-12,2,['11.040.40'],ISO/TC 150/SC 1,9599,[38207],[88637],"['en','fr']",6,"This document specifies the test method for assessing the morphology of UHMWPE moulded forms, which are described in ISO 5834‑2.
It is not applicable to UHMWPE powder forms, which are described in ISO 5834‑1.
NOTE Performance requirements for this test method have not been established.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5835-1:1985 - **Identifier:** ISO 5835-1:1985 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Metal bone screws — Dimensions — Part 1: Screws with asymmetrical thread, spherical under-surfaces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5835:1991 - **Withdrawn / published date:** 1985-06-06 _(verified: appears in the quote below)_ > 12002,IS,,ISO 5835-1:1985,"Implants for surgery — Metal bone screws — Dimensions — Part 1: Screws with asymmetrical thread, spherical under-surfaces","Implants chirurgicaux — Vis métalliques pour os — Dimensions — Partie 1: Vis à filet asymétrique, embase sphérique",1985-06-06,2,['11.040.40'],ISO/TC 150/SC 5,9599,[12003],[12001],,, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5835-2:1978 - **Identifier:** ISO 5835-2:1978 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Metal bone screws — Dimensions — Part 2: Screws with asymmetrical thread, constant fitting (spherical) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5835-1:1985 - **Withdrawn / published date:** 1978-03-01 _(verified: appears in the quote below)_ > 12003,IS,,ISO 5835-2:1978,"Implants for surgery — Metal bone screws — Dimensions — Part 2: Screws with asymmetrical thread, constant fitting (spherical)","Implants pour la chirurgie — Vis métalliques pour os — Dimensions — Partie 2: Vis à filet asymétrique, embase (sphérique) constante",1978-03-01,1,['11.040.40'],ISO/TC 150/SC 5,9599,,[12002],['en'],6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5835-4:1983 - **Identifier:** ISO 5835-4:1983 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Metal bone screws — Dimensions — Part 4: Screws with symmetrical thread, conical under-surfaces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9268:1988 - **Withdrawn / published date:** 1983-07-01 _(verified: appears in the quote below)_ > 12005,IS,,ISO 5835-4:1983,"Implants for surgery — Metal bone screws — Dimensions — Part 4: Screws with symmetrical thread, conical under-surfaces","Implants chirurgicaux — Vis métalliques pour os — Dimensions — Partie 4: Vis à filet symétrique, embase conique",1983-07-01,1,['11.040.40'],ISO/TC 150/SC 5,9599,,[16918],['en'],4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5836-4:1984 - **Identifier:** ISO 5836-4:1984 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Metal bone plates — Part 4: Holes and slots corresponding to screws with symmetrical thread and conical under-surfaces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9269:1988 - **Withdrawn / published date:** 1984-07-01 _(verified: appears in the quote below)_ > 12009,IS,,ISO 5836-4:1984,Implants for surgery — Metal bone plates — Part 4: Holes and slots corresponding to screws with symmetrical thread and conical under-surfaces,Implants chirurgicaux — Plaques métalliques pour os — Partie 4: Chambrages et alésages pour vis à filet symétrique et embase conique,1984-07-01,1,['11.040.40'],ISO/TC 150/SC 5,9599,,[16919],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5838-1:1983 - **Identifier:** ISO 5838-1:1983 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Skeletal pins and wires — Part 1: Material and mechanical requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5838-1:1995 - **Withdrawn / published date:** 1983-08-01 _(verified: appears in the quote below)_ > 12014,IS,,ISO 5838-1:1983,Implants for surgery — Skeletal pins and wires — Part 1: Material and mechanical requirements,Implants chirurgicaux — Fils et broches pour os — Partie 1: Matériaux et propriétés mécaniques,1983-08-01,1,['11.040.40'],ISO/TC 150/SC 5,9599,,[21771],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5838-1:1995 - **Identifier:** ISO 5838-1:1995 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Skeletal pins and wires — Part 1: Material and mechanical requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5838-1:2013 - **Withdrawn / published date:** 1995-11-16 _(verified: appears in the quote below)_ > 21771,IS,,ISO 5838-1:1995,Implants for surgery — Skeletal pins and wires — Part 1: Material and mechanical requirements,Implants chirurgicaux — Fils et broches pour os — Partie 1: Matériaux et propriétés mécaniques,1995-11-16,2,['11.040.40'],ISO/TC 150/SC 5,9599,[12014],[59183],"['en','fr']",2,"Specifies materials and mechanical requirements for skeletal pins and wires for use in bone surgery, excluding wires for binding and twisting. Replaces the first edition, of which it constitutes a technical revision.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5840-1:2015 - **Identifier:** ISO 5840-1:2015 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants — Cardiac valve prostheses — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5840-1:2021 - **Withdrawn / published date:** 2015-09-11 _(verified: appears in the quote below)_ > 61732,IS,,ISO 5840-1:2015,Cardiovascular implants — Cardiac valve prostheses — Part 1: General requirements,Implants cardiovasculaires — Prothèses valvulaires — Partie 1: Exigences générales,2015-09-11,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[77033],"['en','fr']",56,"ISO 5840-1:2015 is applicable to heart valve substitutes intended for human implantation and provides general requirements. Subsequent parts of the ISO 5840?series provide specific requirements.
ISO 5840-1:2015 is applicable to both newly developed and modified heart valve substitutes and to the accessories, packaging, and labelling required for their implantation and for determining the appropriate size of the heart valv Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5840:1984 - **Identifier:** ISO 5840:1984 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Cardiovascular implants — Cardiac valve prostheses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5840:1989 | ISO 5840:1996 - **Withdrawn / published date:** 1984-09-01 _(verified: appears in the quote below)_ > 12018,IS,,ISO 5840:1984,Implants for surgery — Cardiovascular implants — Cardiac valve prostheses,Implants chirurgicaux — Implants cardio- vasculaires — Prothèses valvulaires,1984-09-01,1,['11.040.40'],ISO/TC 150/SC 2,9599,,"[12019,19986]","['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5840:1989 - **Identifier:** ISO 5840:1989 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants — Cardiac valve prostheses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5840:1996 - **Withdrawn / published date:** 1989-11-30 _(verified: appears in the quote below)_ > 12019,IS,,ISO 5840:1989,Cardiovascular implants — Cardiac valve prostheses,Implants cardiovasculaires — Prothèses valvulaires,1989-11-30,2,['11.040.40'],ISO/TC 150/SC 2,9599,[12018],[19986],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5840:1996 - **Identifier:** ISO 5840:1996 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants — Cardiac valve prostheses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5840:2005 - **Withdrawn / published date:** 1996-11-07 _(verified: appears in the quote below)_ > 19986,IS,,ISO 5840:1996,Cardiovascular implants — Cardiac valve prostheses,Implants cardiovasculaires — Prothèses valvulaires,1996-11-07,3,['11.040.40'],ISO/TC 150/SC 2,9599,"[12019,12018]",[34164],['en'],38,"
Tests to be performed and requirements for test apparatus to be used in determining the physical, biological and mechanical properties of heart valve implantates of all types, and of the materials and components of which they are made. Requirements are provided for preclinical, clinical evaluation and for reporting the results.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5840-2:2015 - **Identifier:** ISO 5840-2:2015 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted heart valve substitutes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5840-2:2021 - **Withdrawn / published date:** 2015-09-11 _(verified: appears in the quote below)_ > 51314,IS,,ISO 5840-2:2015,Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted heart valve substitutes,Implants cardiovasculaires — Prothèses valvulaires — Partie 2: Prothèse valvulaires implantées chirurgicalement,2015-09-11,1,['11.040.40'],ISO/TC 150/SC 2,9599,[34164],[77034],"['en','fr']",55,"ISO 5840-2:2015 is applicable to heart valve substitutes intended for implantation in human hearts, generally requiring cardiopulmonary bypass and generally with direct visualization.
ISO 5840-2:2015 is applicable to both newly developed and modified surgical heart valve substitutes and to the accessories, packaging, and labelling required for their implantation Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5840:2005 - **Identifier:** ISO 5840:2005 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants — Cardiac valve prostheses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5840-2:2015 - **Withdrawn / published date:** 2005-03-07 _(verified: appears in the quote below)_ > 34164,IS,,ISO 5840:2005,Cardiovascular implants — Cardiac valve prostheses,Implants cardiovasculaires — Prothèses valvulaires,2005-03-07,4,['11.040.40'],ISO/TC 150/SC 2,9599,[19986],[51314],"['en','fr','ru']",84,"
ISO 5840:2005 is applicable to all devices intended for implantation in human hearts, as a heart valve substitute.
It is applicable to both newly developed and modified heart valve substitutes and to the accessory devices, packaging and labelling required for their implantation and for determining the appropriate size of heart valve substitute to be implanted.
ISO 5840:2005 outlines an approach for qualifying the design and manufacture of a heart valve substitute thro Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5840-3:2013 - **Identifier:** ISO 5840-3:2013 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes implanted by transcatheter techniques _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5840-3:2021 - **Withdrawn / published date:** 2013-03-04 _(verified: appears in the quote below)_ > 51313,IS,,ISO 5840-3:2013,Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes implanted by transcatheter techniques,Implants cardiovasculaires — Prothèses valvulaires — Partie 3: Valves cardiaques de substitution implantées par des techniques transcathéter,2013-03-04,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[67606],"['en','fr','ru']",105,"
ISO 5840-3:2013 outlines an approach for verifying/validating the design and manufacture of a transcatheter heart valve substitute through risk management. The selection of appropriate verification/validation tests and methods are to be derived from the risk assessment. The tests may include those to assess the physical, che Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5841-1:1985 - **Identifier:** ISO 5841-1:1985 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Cardiac pacemakers — Part 1: Implantable ventricular pacemakers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5841-1:1989 - **Withdrawn / published date:** 1985-09-12 _(verified: appears in the quote below)_ > 12020,IS,,ISO 5841-1:1985,Implants for surgery — Cardiac pacemakers — Part 1: Implantable ventricular pacemakers,Implants chirurgicaux — Stimulateurs cardiaques — Partie 1: Stimulateurs ventriculaires implantables,1985-09-12,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[12021],"['en','fr']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5841-1:1989 - **Identifier:** ISO 5841-1:1989 _(verified: appears in the quote below)_ - **Item title:** Cardiac pacemakers — Part 1: Implantable pacemakers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 14708-2:2005 - **Withdrawn / published date:** 1989-11-23 _(verified: appears in the quote below)_ > 12021,IS,,ISO 5841-1:1989,Cardiac pacemakers — Part 1: Implantable pacemakers,Stimulateurs cardiaques — Partie 1: Stimulateurs cardiaques implantables,1989-11-23,2,['11.040.40'],ISO/TC 150/SC 2,9599,[12020],[31508],"['en','fr']",25,"
This standard is valid for all types of implantable pacemakers and specifies as well the basic terms and definitions as the requirements for designation and packaging of pacemakers. In connection with the corresponding test methods minimum requirements are given for the ability of a pacemaker generator to resist adverse environmental conditions. The annexes A to F contain a code system for identification of the mode of operation, test methods, evaluation of li Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5841-2:1986 - **Identifier:** ISO 5841-2:1986 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Cardiac pacemakers — Part 2: Reporting of the clinical performance of populations of pulse generators _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5841-2:2000 - **Withdrawn / published date:** 1986-11-06 _(verified: appears in the quote below)_ > 12022,IS,,ISO 5841-2:1986,Implants for surgery — Cardiac pacemakers — Part 2: Reporting of the clinical performance of populations of pulse generators,Implants chirurgicaux — Stimulateurs cardiaques — Partie 2: Instructions pour l'établissement d'un rapport concernant le fonctionnement clinique de populations de générateurs d'impulsions,1986-11-06,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[31491],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5841-2:2000 - **Identifier:** ISO 5841-2:2000 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Cardiac pacemakers — Part 2: Reporting of clinical performance of populations of pulse generators or leads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5841-2:2014 - **Withdrawn / published date:** 2000-10-19 _(verified: appears in the quote below)_ > 31491,IS,,ISO 5841-2:2000,Implants for surgery — Cardiac pacemakers — Part 2: Reporting of clinical performance of populations of pulse generators or leads,Implants chirurgicaux — Stimulateurs cardiaques — Partie 2: Établissement d'un rapport concernant le fonctionnement clinique de populations de générateurs d'impulsions ou de fils-électrodes,2000-10-19,2,['11.040.40'],ISO/TC 150/SC 6,9599,[12022],[60541],"['en','fr']",19, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5841-3:1992 - **Identifier:** ISO 5841-3:1992 _(verified: appears in the quote below)_ - **Item title:** Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for implantable pacemakers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5841-3:2000 - **Withdrawn / published date:** 1992-11-12 _(verified: appears in the quote below)_ > 12023,IS,,ISO 5841-3:1992,Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for implantable pacemakers,Stimulateurs cardiaques — Partie 3: Connecteurs à bas profil (IS-1) pour stimulateurs implantables,1992-11-12,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[31492],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5841-3:2000 - **Identifier:** ISO 5841-3:2000 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for implantable pacemakers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5841-3:2013 - **Withdrawn / published date:** 2000-11-02 _(verified: appears in the quote below)_ > 31492,IS,,ISO 5841-3:2000,Implants for surgery — Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for implantable pacemakers,Implants chirurgicaux — Stimulateurs cardiaques — Partie 3: Connecteurs à bas profil (IS-1) pour stimulateurs implantables,2000-11-02,2,['11.040.40'],ISO/TC 150/SC 6,9599,[12023],[60542],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5841-3:2000/Cor 1:2003 - **Identifier:** ISO 5841-3:2000/Cor 1:2003 _(verified: appears in the quote below)_ - **Item title:** Implants for surgery — Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for implantable pacemakers — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5841-3:2013 - **Withdrawn / published date:** 2003-11-19 _(verified: appears in the quote below)_ > 39507,IS,Cor,ISO 5841-3:2000/Cor 1:2003,Implants for surgery — Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for implantable pacemakers — Technical Corrigendum 1,Implants chirurgicaux — Stimulateurs cardiaques — Partie 3: Connecteurs à bas profil (IS-1) pour stimulateurs implantables — Rectificatif technique 1,2003-11-19,2,['11.040.40'],ISO/TC 150/SC 6,9599,,[60542],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5843-2:1987 - **Identifier:** ISO 5843-2:1987 _(verified: appears in the quote below)_ - **Item title:** Aerospace — List of equivalent terms — Part 2: Aerospace rivets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5843-2:1990 - **Withdrawn / published date:** 1987-05-14 _(verified: appears in the quote below)_ > 12025,IS,,ISO 5843-2:1987,Aerospace — List of equivalent terms — Part 2: Aerospace rivets,Aéronautique et espace — Liste de termes équivalents — Partie 2: Rivets pour les constructions aérospatiales,1987-05-14,1,"['49.030.60','01.040.49']",ISO/TC 20/SC 8,9599,,[12026],"['en','fr']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5843-3:1987 - **Identifier:** ISO 5843-3:1987 _(verified: appears in the quote below)_ - **Item title:** Aerospace — List of equivalent terms — Part 3: Aerospace bolts and nuts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5843-3:1997 - **Withdrawn / published date:** 1987-08-13 _(verified: appears in the quote below)_ > 12027,IS,,ISO 5843-3:1987,Aerospace — List of equivalent terms — Part 3: Aerospace bolts and nuts,Aéronautique et espace — Liste de termes équivalents — Partie 3: Boulonnerie pour les constructions aérospatiales,1987-08-13,1,"['49.030.30','01.040.49','49.030.20']",ISO/TC 20/SC 8,9599,,[12028],"['en','fr','ru']",21, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5843-4:1988 - **Identifier:** ISO 5843-4:1988 _(verified: appears in the quote below)_ - **Item title:** Aerospace — List of equivalent terms — Part 4: Flight dynamics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5843-4:1990 - **Withdrawn / published date:** 1988-04-28 _(verified: appears in the quote below)_ > 12029,IS,,ISO 5843-4:1988,Aerospace — List of equivalent terms — Part 4: Flight dynamics,Aéronautique et espace — Liste de termes équivalents — Partie 4: Mécanique du vol,1988-04-28,1,"['49.020','01.040.49']",ISO/TC 20/SC 8,9599,,[12030],"['en','fr','ru']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 585:1982 - **Identifier:** ISO 585:1982 _(verified: appears in the quote below)_ - **Item title:** Plastics - Non-plasticized cellulose acetate - Determination of moisture content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 585:1990 - **Withdrawn / published date:** 1982-02-01 _(verified: appears in the quote below)_ > 4682,IS,,ISO 585:1982,Plastics - Non-plasticized cellulose acetate - Determination of moisture content,Plastiques - Acétate de cellulose non plastifié - Détermination de l'humidité,1982-02-01,1,['83.080.20'],ISO/TC 61,9599,,[4683],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5855-1:1981 - **Identifier:** ISO 5855-1:1981 _(verified: appears in the quote below)_ - **Item title:** Aerospace construction — MJ threads — Part 1: Basic profile _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5855-1:1988 - **Withdrawn / published date:** 1981-12-01 _(verified: appears in the quote below)_ > 12050,IS,,ISO 5855-1:1981,Aerospace construction — MJ threads — Part 1: Basic profile,Constructions aérospatiales — Filetage MJ — Partie 1: Profil de base,1981-12-01,1,['49.030.10'],ISO/TC 20/SC 4,9599,,[12051],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5855-1:1988 - **Identifier:** ISO 5855-1:1988 _(verified: appears in the quote below)_ - **Item title:** Aerospace — MJ threads — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5855-1:1999 - **Withdrawn / published date:** 1988-12-29 _(verified: appears in the quote below)_ > 12051,IS,,ISO 5855-1:1988,Aerospace — MJ threads — Part 1: General requirements,Aéronautique et espace — Filetage MJ — Partie 1: Exigences générales,1988-12-29,2,['49.030.10'],ISO/TC 20/SC 4,9599,[12050],[30337],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5855-2:1981 - **Identifier:** ISO 5855-2:1981 _(verified: appears in the quote below)_ - **Item title:** Aerospace construction — MJ threads — Part 2: Dimensions for bolts and nuts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5855-2:1988 - **Withdrawn / published date:** 1981-12-01 _(verified: appears in the quote below)_ > 12052,IS,,ISO 5855-2:1981,Aerospace construction — MJ threads — Part 2: Dimensions for bolts and nuts,Constructions aérospatiales — Filetage MJ — Partie 2: Dimensions pour vis et écrous,1981-12-01,1,['49.030.10'],ISO/TC 20/SC 4,9599,,[12053],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5855-2:1988 - **Identifier:** ISO 5855-2:1988 _(verified: appears in the quote below)_ - **Item title:** Aerospace — MJ threads — Part 2: Limit dimensions for bolts and nuts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5855-2:1999 - **Withdrawn / published date:** 1988-12-29 _(verified: appears in the quote below)_ > 12053,IS,,ISO 5855-2:1988,Aerospace — MJ threads — Part 2: Limit dimensions for bolts and nuts,Aéronautique et espace — Filetage MJ — Partie 2: Dimensions limites pour vis et écrous,1988-12-29,2,['49.030.10'],ISO/TC 20/SC 4,9599,[12052],[30338],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5855-3:1988 - **Identifier:** ISO 5855-3:1988 _(verified: appears in the quote below)_ - **Item title:** Aerospace — MJ threads — Part 3: Limit dimensions for fittings for fluid systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5855-3:1999 - **Withdrawn / published date:** 1988-12-29 _(verified: appears in the quote below)_ > 12054,IS,,ISO 5855-3:1988,Aerospace — MJ threads — Part 3: Limit dimensions for fittings for fluid systems,Aéronautique et espace — Filetage MJ — Partie 3: Dimensions limites pour raccordements de systèmes de fluides,1988-12-29,1,['49.030.10'],ISO/TC 20/SC 4,9599,,[30339],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5856:1991 - **Identifier:** ISO 5856:1991 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 5856 | ISO 5856:2008 - **Withdrawn / published date:** 1991-12-12 _(verified: appears in the quote below)_ > 12058,IS,,ISO 5856:1991,"Aerospace — Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions","Aéronautique et espace — Vis à tête fraisée 100 degrés normale, à empreinte cruciforme déportée avec saillies antidérapantes, avec tige normale et filetage MJ court ou de longueur moyenne, en matériau métallique, revêtues ou non revêtues, des classes de résistance inférieures ou égales à 1 100 MPa — Dimensions",1991-12-12,1,['49.030.20'],ISO/TC 20/SC 4,9599,,"[31739,41820]","['en','fr']",3,
Specifies the dimensions of he Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5857:1988 - **Identifier:** ISO 5857:1988 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads — Procurement specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5857:2008 | ISO/WD 5857 - **Withdrawn / published date:** 1988-02-11 _(verified: appears in the quote below)_ > 12059,IS,,ISO 5857:1988,Aerospace — Alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads — Procurement specification,"Aéronautique et espace — Vis à tête saillante en acier allié, de classe de résistance 1250 MPa et à filetage MJ — Spécification d'approvisionnement",1988-02-11,1,['49.030.20'],ISO/TC 20/SC 4,9599,,"[41819,31738]","['en','fr']",15,"
Specifies the characteristics and quality assurance requirements. Includes definitions. Technical requirements and test methods, qualification testing requirements for bolt samples, summary of qualification and acceptance tests, surface discontinuities and contamination, minimum tensile, double shear and stress Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5858:1991 - **Identifier:** ISO 5858:1991 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Self-locking nuts with maximum operating temperature less than or equal to 425 degrees C — Procurement specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5858:1999 - **Withdrawn / published date:** 1991-12-18 _(verified: appears in the quote below)_ > 12060,IS,,ISO 5858:1991,Aerospace — Self-locking nuts with maximum operating temperature less than or equal to 425 degrees C — Procurement specification,Aéronautique et espace — Écrous à freinage interne dont la température maximale d'utilisation est inférieure ou égale à 425 degrés C — Spécification d'approvisionnement,1991-12-18,1,['49.030.30'],ISO/TC 20/SC 4,9599,,[29281],"['en','fr']",19, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5858:1999 - **Identifier:** ISO 5858:1999 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Procurement specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5858:2026 - **Withdrawn / published date:** 1999-11-18 _(verified: appears in the quote below)_ > 29281,IS,,ISO 5858:1999,"Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Procurement specification",Aéronautique et espace — Écrous à freinage interne dont la température maximale d'utilisation est inférieure ou égale à 425 degrés C — Spécification d'approvisionnement,1999-11-18,2,['49.030.30'],ISO/TC 20/SC 4,9599,[12060],[91461],"['en','fr']",26,"
This International Standard specifies the required characteristics for metric self-locking nuts, with MJ threads, for
use in aerospace construction at a maximum temperature less than or equal to 425 °C.
It is applicable to nuts as defined above, provided that reference is made Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5859:1991 - **Identifier:** ISO 5859:1991 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5859:2014 - **Withdrawn / published date:** 1991-08-08 _(verified: appears in the quote below)_ > 12061,IS,,ISO 5859:1991,Aerospace — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components,Aéronefs — Symboles graphiques pour schémas de circuits de transmissions hydrauliques et pneumatiques,1991-08-08,1,"['01.080.30','49.080']",ISO/TC 20/SC 10,9599,,[61634],"['en','fr']",2,"
The requirements for the symbols are specified in SAE AS 1290A which is adopted as a de facto ISO International Standard. For the purposes of international standardization, the amendments listed in table 1 shall apply to the specific clauses of AS 1290A noted under 'Reference'.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5859:2014 - **Identifier:** ISO 5859:2014 _(verified: appears in the quote below)_ - **Item title:** Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 5859 - **Withdrawn / published date:** 2014-02-11 _(verified: appears in the quote below)_ > 61634,IS,,ISO 5859:2014,Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components,Série aérospatiale — Symboles graphiques pour schémas de circuits de transmissions hydrauliques et pneumatiques,2014-02-11,2,"['01.080.30','49.080']",ISO/TC 20/SC 10,9599,[12061],[84284],['en'],1,ISO 5859:2014 establishes a system of graphic symbols of hydraulic and pneumatic circuits and components for all types of aerospace systems.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5864:1978 - **Identifier:** ISO 5864:1978 _(verified: appears in the quote below)_ - **Item title:** ISO inch screw threads — Allowances and tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5864:1993 - **Withdrawn / published date:** 1978-10-01 _(verified: appears in the quote below)_ > 12063,IS,,ISO 5864:1978,ISO inch screw threads — Allowances and tolerances,Filetages ISO en inches — Jeux et tolérances,1978-10-01,1,['21.040.20'],ISO/TC 1,9599,,[12064],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 587:1981 - **Identifier:** ISO 587:1981 _(verified: appears in the quote below)_ - **Item title:** Solid mineral fuels — Determination of chlorine using Eschka mixture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 587:1997 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 4685,IS,,ISO 587:1981,Solid mineral fuels — Determination of chlorine using Eschka mixture,Combustibles minéraux solides — Dosage du chlore au moyen du mélange Eschka,1981-11-01,2,['75.160.10'],ISO/TC 27/SC 5,9599,,[2756],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 587:1997 - **Identifier:** ISO 587:1997 _(verified: appears in the quote below)_ - **Item title:** Solid mineral fuels — Determination of chlorine using Eschka mixture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 587:2020 - **Withdrawn / published date:** 1997-05-22 _(verified: appears in the quote below)_ > 2756,IS,,ISO 587:1997,Solid mineral fuels — Determination of chlorine using Eschka mixture,Combustibles minéraux solides — Dosage du chlore à l'aide du mélange Eschka,1997-05-22,3,['75.160.10'],ISO/TC 27/SC 5,9599,[4685],[79739],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5884:1987 - **Identifier:** ISO 5884:1987 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Fluid systems and components — Methods for system sampling and measuring the solid particle contamination of hydraulic fluids _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5884:2018 - **Withdrawn / published date:** 1987-08-20 _(verified: appears in the quote below)_ > 12084,IS,,ISO 5884:1987,Aerospace — Fluid systems and components — Methods for system sampling and measuring the solid particle contamination of hydraulic fluids,Aéronautique et espace — Systèmes de fluides et éléments constitutifs — Méthodes de prélèvement et de mesure de la contamination particulaire solide des fluides hydrauliques,1987-08-20,1,['49.080'],ISO/TC 20/SC 10,9599,,[66046],"['en','fr']",14,"Specifies procedures for determining the level of contamination. Three procedures are specified herein: microscopic method, automatic particle counting method and gravimetric method. In addition lays down the procedures for cleaning the apparatus and sample bottles, and specifies the solv Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 589:1981 - **Identifier:** ISO 589:1981 _(verified: appears in the quote below)_ - **Item title:** Hard coal — Determination of total moisture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 589:2003 | ISO/DIS 589 - **Withdrawn / published date:** 1981-10-01 _(verified: appears in the quote below)_ > 4686,IS,,ISO 589:1981,Hard coal — Determination of total moisture,Houille — Détermination de l'humidité totale,1981-10-01,2,['73.040'],ISO/TC 27/SC 5,9599,,"[35299,1302]","['en','fr']",6,"
For all hard coals two methods are specified: A) The sample is heated in a flask under reflux conditions with boiling toluene. The moisture from the coal is entrained by the toluene vapour and carried to a condenser fitted with a graduated receiver. The water then separates in the receiver, to from the lower layer, whilst the excess toluene is returned to the destillation flask by means of an overflow. The moisture in the coal is calculated from the volume of water collected. B) The sample is dried in an Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 589:2003 - **Identifier:** ISO 589:2003 _(verified: appears in the quote below)_ - **Item title:** Hard coal — Determination of total moisture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 589:2008 - **Withdrawn / published date:** 2003-11-10 _(verified: appears in the quote below)_ > 35299,IS,,ISO 589:2003,Hard coal — Determination of total moisture,Houille — Détermination de l'humidité totale,2003-11-10,3,['73.040'],ISO/TC 27/SC 5,9599,[4686],[45370],['en'],7,"
ISO 589:2003 describes two methods for the determination of the total moisture content of hard coals. Depending on the coal rank, there may be systematic differences between the results obtained by applying different methods on subsamples of the same sample. Methods using a nitrogen atmosphere are suitable for all hard coals; methods with drying in air are only suitable for hard coals not susceptible to oxidation.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5892:1981 - **Identifier:** ISO 5892:1981 _(verified: appears in the quote below)_ - **Item title:** Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5892:2013 - **Withdrawn / published date:** 1981-10-01 _(verified: appears in the quote below)_ > 12090,IS,,ISO 5892:1981,Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification,Profilés en caoutchouc pour le bâtiment — Matériaux pour profilés de structure compacts préformés vulcanisés — Spécifications,1981-10-01,1,"['83.140.50','91.100.50']",ISO/TC 45/SC 4,9599,,[56745],"['en','fr']",5,Specifies material requirements in sealing operations where both resistance to stress relaxation and resistance to weathering are essential. Relates particularly to gaskets of the lock-strip type. Does not give the material requirements for gaskets used for sealing glazing and panels. An annex with figures refers to lip seal pressure measurement.
12091, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5892:2013 - **Identifier:** ISO 5892:2013 _(verified: appears in the quote below)_ - **Item title:** Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5892:2024 - **Withdrawn / published date:** 2013-06-03 _(verified: appears in the quote below)_ > 56745,IS,,ISO 5892:2013,Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification,Profilés en caoutchouc pour le bâtiment — Matériaux pour profilés de structure compacts préformés vulcanisés — Spécifications,2013-06-03,2,"['83.140.50','91.100.50']",ISO/TC 45/SC 4,9599,[12090],[85140],['en'],9,"ISO 5892:2013 specifies material requirements for preformed, solid vulcanized rubber structural gaskets in sealing and supporting applications for buildings.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5893:1985 - **Identifier:** ISO 5893:1985 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5893:1993 - **Withdrawn / published date:** 1985-05-23 _(verified: appears in the quote below)_ > 12091,IS,,ISO 5893:1985,"Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description","Appareils d'essai du caoutchouc et des plastiques — Types pour traction, flexion et compression (vitesse de translation constante) — Description",1985-05-23,1,['83.200'],ISO/TC 45/SC 2,9599,,[12092],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5893:1993 - **Identifier:** ISO 5893:1993 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5893:2002 - **Withdrawn / published date:** 1993-09-23 _(verified: appears in the quote below)_ > 12092,IS,,ISO 5893:1993,"Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description","Appareils d'essai du caoutchouc et des plastiques — Types pour traction, flexion et compression (vitesse de translation constante) — Description",1993-09-23,2,['83.200'],ISO/TC 45/SC 2,9599,[12091],[35827],"['en','fr']",6,"Suitable not only for the material mentioned, but also for adhesives. Any system may only be applicable to a narrower range of material. Also covers such systems when used for flexural, shear and compression tests.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5893:2002 - **Identifier:** ISO 5893:2002 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5893:2019 - **Withdrawn / published date:** 2002-06-27 _(verified: appears in the quote below)_ > 35827,IS,,ISO 5893:2002,"Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification","Appareils d'essai du caoutchouc et des plastiques — Types pour traction, flexion et compression (vitesse de translation constante) — Spécifications",2002-06-27,3,['83.200'],ISO/TC 45/SC 2,9599,[12092],[77424],"['en','fr']",6,"ISO 5893:2002 specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbers, plastics and adhesives, although any one system may only be applicable to a narrower range of materials. It also covers such systems when used for flexural, shear and compression tests. Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5894:1978 - **Identifier:** ISO 5894:1978 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Manholes with bolted covers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5894:1999 - **Withdrawn / published date:** 1978-11-01 _(verified: appears in the quote below)_ > 12093,IS,,ISO 5894:1978,Shipbuilding — Manholes with bolted covers,Construction navale — Trous d'homme avec couvercle boulonné,1978-11-01,1,['47.020.10'],ISO/TC 8/SC 8,9599,[9907],[26573],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5894:1999 - **Identifier:** ISO 5894:1999 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Manholes with bolted covers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5894:2018 - **Withdrawn / published date:** 1999-12-02 _(verified: appears in the quote below)_ > 26573,IS,,ISO 5894:1999,Ships and marine technology — Manholes with bolted covers,Navires et technologie maritime — Trous d'homme avec couvercle boulonné,1999-12-02,2,['47.020.10'],ISO/TC 8/SC 8,9599,[12093],[72095],['en'],8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5897:1987 - **Identifier:** ISO 5897:1987 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Rear-window demisting system for passenger cars — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5897:1998 - **Withdrawn / published date:** 1987-10-01 _(verified: appears in the quote below)_ > 12094,IS,,ISO 5897:1987,Road vehicles — Rear-window demisting system for passenger cars — Test method,Véhicules routiers — Dispositif de désembuage de la lunette arrière des voitures particulières — Méthode d'essai,1987-10-01,1,['43.040.60'],ISO/TC 22,9599,,[21535],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5898:1987 - **Identifier:** ISO 5898:1987 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Rear-window defrosting system for passenger cars — Test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5898:1997 - **Withdrawn / published date:** 1987-10-08 _(verified: appears in the quote below)_ > 12095,IS,,ISO 5898:1987,Road vehicles — Rear-window defrosting system for passenger cars — Test method,Véhicules routiers — Dispositif de dégivrage de la lunette arrière des voitures particulières — Méthode d'essai,1987-10-08,1,['43.040.60'],ISO/TC 22,9599,,[21534],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 590:1981 - **Identifier:** ISO 590:1981 _(verified: appears in the quote below)_ - **Item title:** Oil of brazilian sassafras _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 590 - **Withdrawn / published date:** 1981-09-01 _(verified: appears in the quote below)_ > 4687,IS,,ISO 590:1981,Oil of brazilian sassafras,Huile essentielle de sassafras du Brésil,1981-09-01,1,['71.100.60'],ISO/TC 54,9599,,[4688],"['en','fr']",2,"
The oil shall be a clear mobile liquid which may become cloudy or crystalline at low temperatures. The colour shall be yellow to brownish-yellow, the odour characteristic, recalling safrole. The relative density at 20/20 °C has to ly between 1,082 and 1,094 and the refractive index at 20 °C between 1,5330 and 1,5370. The optical rotation shall range from - 0,50 to + 3,0 . The miscibility with 90 % (V/V) ethanol at 20 °C shall be 1 volume in 2 volumes to give a clear solution. The freezing point shall ly between 7,5 °C and 9,5 °C. Samp Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5901:1980 - **Identifier:** ISO 5901:1980 _(verified: appears in the quote below)_ - **Item title:** Alpine skis — Geometry — Terms, definitions and measuring conditions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7796:1985 | ISO 6289:1985 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 12098,IS,,ISO 5901:1980,"Alpine skis — Geometry — Terms, definitions and measuring conditions","Skis alpins — Géométrie, termes, définitions et conditions de mesurage",1980-08-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,"[14690,12573]","['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5902:1980 - **Identifier:** ISO 5902:1980 _(verified: appears in the quote below)_ - **Item title:** Alpine skis — Determination of the elastic properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5902:2013 | ISO/WD 5902 - **Withdrawn / published date:** 1980-05-01 _(verified: appears in the quote below)_ > 12099,IS,,ISO 5902:1980,Alpine skis — Determination of the elastic properties,Skis alpins — Détermination des caractéristiques élastiques,1980-05-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,"[60844,26741]","['en','fr']",6,
Specifies laboratory measurement methods to determine the elastic properties of alpine skis. Its purpose is to calculate the resistance of defined parts of the ski to bending and torsion.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 591:1977 - **Identifier:** ISO 591:1977 _(verified: appears in the quote below)_ - **Item title:** Titanium dioxide pigments for paints _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 591-1:2000 - **Withdrawn / published date:** 1977-04-01 _(verified: appears in the quote below)_ > 4689,IS,,ISO 591:1977,Titanium dioxide pigments for paints,Pigments de dioxyde de titane pour peintures,1977-04-01,1,['87.060.10'],ISO/TC 256,9599,,[19997],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5910:2018 - **Identifier:** ISO 5910:2018 _(verified: appears in the quote below)_ - **Item title:** Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5910:2024 - **Withdrawn / published date:** 2018-05-31 _(verified: appears in the quote below)_ > 66356,IS,,ISO 5910:2018,Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices,Implants cardiovasculaires et circuits extra-corporels — Dispositifs de réparation de valves cardiaques,2018-05-31,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[80224],['en'],126,"1.1 This document applies to all heart valve repair systems that have an intended use to repair and/or improve the function of native human heart valves by acting either on the valve apparatus or on the adjacent anatomy (e.g. ventricle, coronary sinus).
1.2 This document outlines an approach for verifying/validating the design and manufacture of a heart valve repair system through risk management. The s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5912:1993 - **Identifier:** ISO 5912:1993 _(verified: appears in the quote below)_ - **Item title:** Camping tents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5912:2003 - **Withdrawn / published date:** 1993-12-16 _(verified: appears in the quote below)_ > 12106,IS,,ISO 5912:1993,Camping tents,Tentes de camping,1993-12-16,2,['97.200.30'],ISO/TC 83,9599,[12107],[33430],"['en','fr']",18,"
Specifies the requirements on safety, performance and fitness for use. Applies to the following types and classes of camping tents: sleeping tents, touring tents, residential tents. Does not apply to caravan awnings and tents for special applications, such as tents for alpine mountaineering. Requirements for fabrics are specified in ISO 10966.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5912:1993/Amd 1:1998 - **Identifier:** ISO 5912:1993/Amd 1:1998 _(verified: appears in the quote below)_ - **Item title:** Camping tents — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5912:2003 - **Withdrawn / published date:** 1998-06-11 _(verified: appears in the quote below)_ > 27391,IS,Amd,ISO 5912:1993/Amd 1:1998,Camping tents — Amendment 1,Tentes de camping — Amendement 1,1998-06-11,2,['97.200.30'],ISO/TC 83,9599,,[33430],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5912:2003 - **Identifier:** ISO 5912:2003 _(verified: appears in the quote below)_ - **Item title:** Camping tents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5912:2011 | ISO 10966:2011 - **Withdrawn / published date:** 2003-11-07 _(verified: appears in the quote below)_ > 33430,IS,,ISO 5912:2003,Camping tents,Tentes de camping,2003-11-07,3,['97.200.30'],ISO/TC 83,9599,"[12106,27391]","[42074,52654]","['en','fr']",22,"ISO 5912:2003 specifies the requirements on safety, performance and fitness for use of camping tents.
It applies to types and classes of tents for camping and outdoor purposes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5912:2011 - **Identifier:** ISO 5912:2011 _(verified: appears in the quote below)_ - **Item title:** Camping tents _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5912:2020 - **Withdrawn / published date:** 2011-09-30 _(verified: appears in the quote below)_ > 42074,IS,,ISO 5912:2011,Camping tents,Tentes de camping,2011-09-30,4,['97.200.30'],ISO/TC 83,9599,"[33430,35114]",[72895],"['en','fr']",23,"ISO 5912:2011 specifies requirements for safety, performance and fitness for use of camping tents (referred to as 'tents' throughout).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5913:1985 - **Identifier:** ISO 5913:1985 _(verified: appears in the quote below)_ - **Item title:** Camping tents — Requirements and test methods — Type L (lightweight tents) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5912:1993 - **Withdrawn / published date:** 1985-10-17 _(verified: appears in the quote below)_ > 12107,IS,,ISO 5913:1985,Camping tents — Requirements and test methods — Type L (lightweight tents),Tentes de camping — Exigences et méthodes d'essai — Type L (tentes de poids léger),1985-10-17,1,['97.200.30'],ISO/TC 83,9599,,[12106],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 592:1981 - **Identifier:** ISO 592:1981 _(verified: appears in the quote below)_ - **Item title:** Essential oils — Determination of optical rotation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 592:1998 - **Withdrawn / published date:** 1981-07-01 _(verified: appears in the quote below)_ > 4690,IS,,ISO 592:1981,Essential oils — Determination of optical rotation,Huiles essentielles — Détermination du pouvoir rotatoire,1981-07-01,1,['71.100.60'],ISO/TC 54,9599,,[25311],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5922:1981 - **Identifier:** ISO 5922:1981 _(verified: appears in the quote below)_ - **Item title:** Malleable cast iron _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5922:2005 - **Withdrawn / published date:** 1981-04-01 _(verified: appears in the quote below)_ > 12115,IS,,ISO 5922:1981,Malleable cast iron,Fonte malléable,1981-04-01,1,['77.080.10'],ISO/TC 25,9599,"[5362,5363,5364]",[34666],"['en','fr']",6,"Cancels and replaces ISO Recommendations R 942:1969, R 943:1969 and R 944:1969. Specifies requirements for malleable cast iron and gives a classification on the basis of mechanical properties. An annex gives classification principles.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5923:1984 - **Identifier:** ISO 5923:1984 _(verified: appears in the quote below)_ - **Item title:** Fire protection — Fire extinguishing media — Carbon dioxide _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5923:1989 - **Withdrawn / published date:** 1984-02-01 _(verified: appears in the quote below)_ > 12116,IS,,ISO 5923:1984,Fire protection — Fire extinguishing media — Carbon dioxide,Protection contre l'incendie — Agents extincteurs — Dioxyde de carbone,1984-02-01,1,['13.220.10'],ISO/TC 21/SC 6,9599,,[12117],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5923:1989 - **Identifier:** ISO 5923:1989 _(verified: appears in the quote below)_ - **Item title:** Fire protection — Fire extinguishing media — Carbon dioxide _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6183:2009 | ISO 5923:2012 - **Withdrawn / published date:** 1989-12-14 _(verified: appears in the quote below)_ > 12117,IS,,ISO 5923:1989,Fire protection — Fire extinguishing media — Carbon dioxide,Protection contre l'incendie — Agents extincteurs — Dioxyde de carbone,1989-12-14,2,['13.220.10'],ISO/TC 21/SC 8,9599,[12116],"[50545,57907]","['en','fr']",12,"Specifies requirements for testing by a appropriate method of test given. Annexes A to C specify methods for determining water, oil and total sulfur contents. Annexes D to G provide important information on and give recommendations relating to the safety and use of the medium.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5923:2012 - **Identifier:** ISO 5923:2012 _(verified: appears in the quote below)_ - **Item title:** Equipment for fire protection and fire fighting — Fire extinguishing media — Carbon dioxide _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 5923 - **Withdrawn / published date:** 2012-08-08 _(verified: appears in the quote below)_ > 57907,IS,,ISO 5923:2012,Equipment for fire protection and fire fighting — Fire extinguishing media — Carbon dioxide,Équipement de protection et de lutte contre l'incendie — Agents extincteurs — Dioxyde de carbone,2012-08-08,3,['13.220.10'],ISO/TC 21/SC 8,9599,[12117],[72492],"['en','fr','ru']",15,ISO 5923:2012 specifies requirements for carbon dioxide for use as a fire extinguishing medium.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5925-1:1981 - **Identifier:** ISO 5925-1:1981 _(verified: appears in the quote below)_ - **Item title:** Fire tests — Evaluation of performance of smoke control door assemblies — Part 1: Ambient temperature test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5925-1:2007 | ISO/CD 5925-1 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 12121,IS,,ISO 5925-1:1981,Fire tests — Evaluation of performance of smoke control door assemblies — Part 1: Ambient temperature test,Essais au feu — Évaluation de performance des ensembles-portes pare-fumée — Partie 1: Essai à la température ambiante,1981-11-01,1,"['13.220.50','91.060.50']",ISO/TC 92,9599,,"[35264,12122]","['en','fr']",6,Includes a method for assessing the performance of door and shutter assemblies intended to act as barriers to smoke in a fire. The severity of heat exposure conditions governs the smoke control performance of doors and this has led to the preparation of a series of test methods.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5925-1:2007 - **Identifier:** ISO 5925-1:2007 _(verified: appears in the quote below)_ - **Item title:** Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5925:2025 - **Withdrawn / published date:** 2007-09-13 _(verified: appears in the quote below)_ > 35264,IS,,ISO 5925-1:2007,Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests,Essais au feu — Assemblages porte et volet pare-fumée — Partie 1: Essais de fuite à température ambiante et moyenne,2007-09-13,2,"['13.220.50','13.220.20','91.060.50']",ISO/TC 92/SC 2,9599,[12121],[89416],['en'],11,"The test described in ISO 5925-1:2007 determines the rate of leakage of ambient (cold) and medium (warm) temperature smoke from one side of door and shutter assemblies to the other, under the specified test conditions. The test is applicable to door and shutter assemblies of different configurations intended for purposes of controlling the pa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5925-1:2007/Amd 1:2015 - **Identifier:** ISO 5925-1:2007/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5925:2025 - **Withdrawn / published date:** 2015-01-31 _(verified: appears in the quote below)_ > 63725,IS,Amd,ISO 5925-1:2007/Amd 1:2015,Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests — Amendment 1,Essais au feu — Assemblages porte et volet pare-fumée — Partie 1: Essais de fuite à température ambiante et moyenne — Amendement 1,2015-01-31,2,"['13.220.50','13.220.20','91.060.50']",ISO/TC 92/SC 2,9599,,[89416],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 593:1974 - **Identifier:** ISO 593:1974 _(verified: appears in the quote below)_ - **Item title:** Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 217:1995 - **Withdrawn / published date:** 1974-06-01 _(verified: appears in the quote below)_ > 4691,IS,,ISO 593:1974,Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range,Papier — Dimensions brutes de stock pour la série A-ISO — Série complémentaire ISO,1974-06-01,1,['85.060'],ISO/TC 6,9599,,[20074],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 594-1:1986 - **Identifier:** ISO 594-1:1986 _(verified: appears in the quote below)_ - **Item title:** Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80369-7:2016 - **Withdrawn / published date:** 1986-06-12 _(verified: appears in the quote below)_ > 4693,IS,,ISO 594-1:1986,"Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 1: General requirements",Assemblages coniques à 6 % (Luer) des seringues et aiguilles et de certains autres appareils à usage médical — Partie 1: Spécifications générales,1986-06-12,1,['11.040.25'],ISO/TC 210,9599,[4692],[58011],"['en','fr']",7,
Specification of the requirements for conical (Luer) fittings for use with hyperdemic syringes and needles and with certain other apparatus for medical use such as transfusion and infusion sets. It covers fittings made of rigid and semi-rigid materials and includes test methods for gauging and performance. It excludes p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 594-2:1991 - **Identifier:** ISO 594-2:1991 _(verified: appears in the quote below)_ - **Item title:** Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 594-2:1998 - **Withdrawn / published date:** 1991-05-02 _(verified: appears in the quote below)_ > 4694,IS,,ISO 594-2:1991,"Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings",Assemblages coniques à 6 % (Luer) des seringues et aiguilles et de certains autres appareils à usage médical — Partie 2: Assemblages à verrouillage,1991-05-02,1,['11.040.25'],ISO/TC 84,9599,[4692],[29540],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 594-2:1998 - **Identifier:** ISO 594-2:1998 _(verified: appears in the quote below)_ - **Item title:** Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 80369-7:2016 - **Withdrawn / published date:** 1998-09-03 _(verified: appears in the quote below)_ > 29540,IS,,ISO 594-2:1998,"Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings",Assemblages coniques à 6 % (Luer) des seringues et aiguilles et de certains autres appareils à usage médical — Partie 2: Assemblages à verrouillage,1998-09-03,2,['11.040.25'],ISO/TC 210,9599,[4694],[58011],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5940:1981 - **Identifier:** ISO 5940:1981 _(verified: appears in the quote below)_ - **Item title:** Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of softening point by the ring-and-ball method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5940-1:2019 - **Withdrawn / published date:** 1981-05-01 _(verified: appears in the quote below)_ > 12134,IS,,ISO 5940:1981,Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of softening point by the ring-and-ball method,Produits carbonés utilisés pour la production de l'aluminium — Brai pour électrodes — Détermination du point de ramollissement par la méthode bille et anneau,1981-05-01,1,['71.100.10'],ISO/TC 226,9599,,[73941],"['en','fr']",5,"
Specifies a method using a disc-shped test piece to be prepared by moulding a test portion ina ring which is fitted into a heated bath. A steel ball is placed on the upper surface of the test piece. Then the temperature (softening temperature) is determined at which the test piece, on heating at a prescr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5943:1978 - **Identifier:** ISO 5943:1978 _(verified: appears in the quote below)_ - **Item title:** Cheese and processed cheese products — Determination of chloride content — Potentiometric titration method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5943:1988 - **Withdrawn / published date:** 1978-10-01 _(verified: appears in the quote below)_ > 12136,IS,,ISO 5943:1978,Cheese and processed cheese products — Determination of chloride content — Potentiometric titration method,Fromages et fromages fondus — Détermination de la teneur en chlorures — Méthode par titrage potentiométrique,1978-10-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[12137],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5943:1988 - **Identifier:** ISO 5943:1988 _(verified: appears in the quote below)_ - **Item title:** Cheese and processed cheese products — Determination of chloride content — Potentiometric titration method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5943:2004 | ISO/WD 5943 - **Withdrawn / published date:** 1988-12-08 _(verified: appears in the quote below)_ > 12137,IS,,ISO 5943:1988,Cheese and processed cheese products — Determination of chloride content — Potentiometric titration method,Fromages et fromages fondus — Détermination de la teneur en chlorures — Méthode par titrage potentiométrique,1988-12-08,2,['67.100.30'],ISO/TC 34/SC 5,9599,[12136],"[40467,12138]","['en','fr']",2,"
Is applicable to all cheeses and processed cheese products containing more than 0,2 (m/m) of chloride ion. The principle is based on the suspension of a test portion in water, acidification with nitric acid and subsequent potentiometric titration of chloride ion with standard volumetric silver nitrate solution.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5943:2004 - **Identifier:** ISO 5943:2004 _(verified: appears in the quote below)_ - **Item title:** Cheese and processed cheese products — Determination of chloride content — Potentiometric titration method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5943:2006 - **Withdrawn / published date:** 2004-11-18 _(verified: appears in the quote below)_ > 40467,IS,,ISO 5943:2004,Cheese and processed cheese products — Determination of chloride content — Potentiometric titration method,Fromages et fromages fondus — Détermination de la teneur en chlorures — Méthode par titrage potentiométrique,2004-11-18,3,['67.100.30'],ISO/TC 34/SC 5,9599,[12137],[43922],"['en','fr']",5,"ISO 5943|IDF 88:2004 specifies a potentiometric titration method for the determination of the chloride content of cheese and processed cheese products.
The method is applicable to all cheeses and processed cheese products containing more than 0,2 % (mass fraction) of chloride ion.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5945:1982 - **Identifier:** ISO 5945:1982 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of polyisoprene content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5945:1989 - **Withdrawn / published date:** 1982-04-01 _(verified: appears in the quote below)_ > 12140,IS,,ISO 5945:1982,Rubber — Determination of polyisoprene content,Caoutchouc — Détermination de la teneur en polyisoprène,1982-04-01,1,['83.060'],ISO/TC 45,9599,,[12141],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5945:1989 - **Identifier:** ISO 5945:1989 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of polyisoprene content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 5945 - **Withdrawn / published date:** 1989-11-23 _(verified: appears in the quote below)_ > 12141,IS,,ISO 5945:1989,Rubber — Determination of polyisoprene content,Caoutchouc — Détermination de la teneur en polyisoprène,1989-11-23,2,['83.060'],ISO/TC 45/SC 2,9599,[12140],[43683],"['en','fr']",6,"This ingredient occurs as natural isoprene rubber (NR), synthetic isoprene rubber (IR), balata and gutta percha, in the total solids of NR or IR latices, in solid raw rubbers or in cured or uncured compounds. The method is applicable to these isoprene rubbers alone or in blends. Milling of the test portion as finely as possible is advisable. 2 tables and 2 figures. Annex for information on bibliography. - Replaces the first edition (ISO 5945:1982).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5948:1981 - **Identifier:** ISO 5948:1981 _(verified: appears in the quote below)_ - **Item title:** Railway rolling stock material — Ultrasonic acceptance testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5948:1994 - **Withdrawn / published date:** 1981-03-01 _(verified: appears in the quote below)_ > 12143,IS,,ISO 5948:1981,Railway rolling stock material — Ultrasonic acceptance testing,Matériel roulant de chemin de fer — Essai de réception aux ultra-sons,1981-03-01,1,"['77.040.20','45.060']",ISO/TC 17,9599,,[1165],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5948:1994 - **Identifier:** ISO 5948:1994 _(verified: appears in the quote below)_ - **Item title:** Railway rolling stock material — Ultrasonic acceptance testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 5948 | ISO 5948:2018 - **Withdrawn / published date:** 1994-06-16 _(verified: appears in the quote below)_ > 1165,IS,,ISO 5948:1994,Railway rolling stock material — Ultrasonic acceptance testing,Matériel roulant de chemin de fer — Essai de réception aux ultrasons,1994-06-16,2,"['45.060.01','77.040.20']",ISO/TC 17/SC 15,9599,[12143],"[57410,68532]","['en','fr']",7,"Contains ultrasonic acceptance testing requirements concerning the materials of axles, wheels and tyres.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 595-2:1987 - **Identifier:** ISO 595-2:1987 _(verified: appears in the quote below)_ - **Item title:** Reusable all-glass or metal-and-glass syringes for medical use — Part 2: Design, performance requirements and tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 595-2 - **Withdrawn / published date:** 1987-11-19 _(verified: appears in the quote below)_ > 4697,IS,,ISO 595-2:1987,"Reusable all-glass or metal-and-glass syringes for medical use — Part 2: Design, performance requirements and tests","Seringues réutilisables en verre ou en verre et métal à usage médical — Partie 2: Conception, performances et essais",1987-11-19,1,['11.040.25'],ISO/TC 84,9599,[4695],[60509],"['en','fr']",3,"Specification of the materials, construction and assembly, performance requirements like resistance to dry heat and corrosion, freedom from leakage, etc. and the test methods and procedures of reusable syringes for medical use.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5950:1979 - **Identifier:** ISO 5950:1979 _(verified: appears in the quote below)_ - **Item title:** Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5950:1991 - **Withdrawn / published date:** 1979-10-01 _(verified: appears in the quote below)_ > 12145,IS,,ISO 5950:1979,Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues en continu d'un dépôt électrolytique d'étain, de qualité commerciale et pour emboutissage",1979-10-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[12146],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5950:1991 - **Identifier:** ISO 5950:1991 _(verified: appears in the quote below)_ - **Item title:** Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5950:2000 - **Withdrawn / published date:** 1991-04-11 _(verified: appears in the quote below)_ > 12146,IS,,ISO 5950:1991,Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues en continu d'un dépôt électrolytique d'étain, de qualité commerciale et pour emboutissage",1991-04-11,2,['77.140.50'],ISO/TC 17/SC 12,9599,[12145],[27961],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5950:2000 - **Identifier:** ISO 5950:2000 _(verified: appears in the quote below)_ - **Item title:** Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5950:2008 - **Withdrawn / published date:** 2000-06-08 _(verified: appears in the quote below)_ > 27961,IS,,ISO 5950:2000,Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues en continu d'un dépôt électrolytique d'étain, de qualités commerciale et pour emboutissage",2000-06-08,3,['77.140.50'],ISO/TC 17/SC 12,9599,[12146],[43290],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5950:2008 - **Identifier:** ISO 5950:2008 _(verified: appears in the quote below)_ - **Item title:** Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5950:2012 - **Withdrawn / published date:** 2008-04-01 _(verified: appears in the quote below)_ > 43290,IS,,ISO 5950:2008,Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues en continu d'un dépôt électrolytique d'étain, de qualités commerciale et pour emboutissage",2008-04-01,4,['77.140.50'],ISO/TC 17/SC 12,9599,[27961],[60963],"['en','ru']",9,"ISO 5950:2008 applies to cold-reduced carbon steel sheet of commercial and drawing qualities coated in coil form by electro-deposition of tin. The product is commonly known as electrolytic tin-coated sheet and is used where solderability is desired, appearance is important, or a degree of corrosion resistance under specific conditions is adv Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5951:1980 - **Identifier:** ISO 5951:1980 _(verified: appears in the quote below)_ - **Item title:** Hot-rolled steel sheet of higher yield strength with improved formability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5951:1993 - **Withdrawn / published date:** 1980-09-01 _(verified: appears in the quote below)_ > 12147,IS,,ISO 5951:1980,Hot-rolled steel sheet of higher yield strength with improved formability,Tôles laminées à chaud en acier à limite d'élasticité et aptitude au formage accrues,1980-09-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[12148],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5951:1993 - **Identifier:** ISO 5951:1993 _(verified: appears in the quote below)_ - **Item title:** Hot-rolled steel sheet of higher yield strength with improved formability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5951:2001 - **Withdrawn / published date:** 1993-10-07 _(verified: appears in the quote below)_ > 12148,IS,,ISO 5951:1993,Hot-rolled steel sheet of higher yield strength with improved formability,Tôles laminées à chaud en acier à limite d'élasticité et aptitude au formage accrues,1993-10-07,2,['77.140.50'],ISO/TC 17/SC 12,9599,[12147],[30954],"['en','fr']",10,"
Applies to products produced in thicknesses of 1,6 mm and over and widths of 600 mm and over, in coils and cut lengths. Hot-rolled sheet less than 600 mm wide may be slit from wide sheet and will be considered as sheet. Specifies conditions of manufacture (steelmaking, chemical composition, chemical analysis, weldability, application, mechanical properties, surface condition), dimensional tolerances, sampling, mechanical propert Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5951:2001 - **Identifier:** ISO 5951:2001 _(verified: appears in the quote below)_ - **Item title:** Hot-rolled steel sheet of higher yield strength with improved formability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5951:2008 - **Withdrawn / published date:** 2001-10-18 _(verified: appears in the quote below)_ > 30954,IS,,ISO 5951:2001,Hot-rolled steel sheet of higher yield strength with improved formability,Tôles en acier laminées à chaud à limite d'élasticité et aptitude au formage accrues,2001-10-18,3,['77.140.50'],ISO/TC 17/SC 12,9599,[12148],[45025],['en'],13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5951:2008 - **Identifier:** ISO 5951:2008 _(verified: appears in the quote below)_ - **Item title:** Hot-rolled steel sheet of higher yield strength with improved formability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5951:2013 - **Withdrawn / published date:** 2008-08-11 _(verified: appears in the quote below)_ > 45025,IS,,ISO 5951:2008,Hot-rolled steel sheet of higher yield strength with improved formability,Tôles en acier laminées à chaud à limite d'élasticité et aptitude au formage accrues,2008-08-11,4,['77.140.50'],ISO/TC 17/SC 12,9599,[30954],[61300],"['en','ru']",8,"
ISO 5951:2008 applies to all grades of continuously hot-rolled steel sheet of higher yield strength with improved formability. The steel is killed, made according to a fine grain practice and has a suitable chemical composition, including microalloying elements, to provide improved formability. The product is intended for the fabrication of parts requiring better formability than is provided by normal high yield strength steel sh Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 136](https://referencesource.org/iso-standard-supersessions/p/136/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 138](https://referencesource.org/iso-standard-supersessions/p/138/) Last verified: 2026-08-05. Review by: 2027-02-02.