Covers both caseins obtained by acid precipitation or lactic fermentation and rennet caseins. The principle of determination is based on the aqueous extraction of a test portion at 60 degrees centigrade, filtration and titration of the filtrate with a standard volumetric sodium hydroxide solution using phenophthalein as indicator.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5548:1980 - **Identifier:** ISO 5548:1980 _(verified: appears in the quote below)_ - **Item title:** Caseins and caseinates — Determination of lactose content — Photometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5548:2004 | ISO/WD 5548 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 11613,IS,,ISO 5548:1980,Caseins and caseinates — Determination of lactose content — Photometric method,Caséines et caséinates — Détermination de la teneur en lactose — Méthode photométrique,1980-10-01,1,['67.100.99'],ISO/TC 34/SC 5,9599,,"[40466,11614]","['en','fr']",3,Specifies a method for determining the lactose and other soluble carbohydrates content of caseins and caseinates containing less than 2.0 % of total soluble carbohydrates. Before precipitation of the casein with acetic acid and sodium acetate solution and subsequent filtration a test portion is dissolved either in hot water in the case of caseinates or in hot water with the addition of sodium hydrogen carbonate in the case Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5549:1978 - **Identifier:** ISO 5549:1978 _(verified: appears in the quote below)_ - **Item title:** Caseins and caseinates — Determination of protein content (Reference method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 5549 | ISO 8968-1:2014 - **Withdrawn / published date:** 1978-06-01 _(verified: appears in the quote below)_ > 11615,IS,,ISO 5549:1978,Caseins and caseinates — Determination of protein content (Reference method),Caséines et caséinates — Détermination de la teneur en protéines (Méthode de référence),1978-06-01,1,['67.100.99'],ISO/TC 34/SC 5,9599,,"[39611,61020]","['en','fr']",3,"
Does not apply to caseins and caseinates containing ammonium caseinate or other ammonium compounds, or other nitrogenous nonprotein compounds. The principle of determination consists in digesting a test portion with a mixture of potassium sulphate and sulphuric acid, in the presence of copper(II) sulphate as catalyst, to convert organic nitrogen into ammoniacal nitrogen, distilling and absorbing the ammonia in boric acid so Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 555-2:1974 - **Identifier:** ISO 555-2:1974 _(verified: appears in the quote below)_ - **Item title:** Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 2: Integration (sudden injection) method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 555-2:1987 - **Withdrawn / published date:** 1974-12-01 _(verified: appears in the quote below)_ > 4638,IS,,ISO 555-2:1974,Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 2: Integration (sudden injection) method,Mesure de débit des liquides dans les canaux découverts — Méthodes de dilution pour le mesurage du débit en régime permanent — Partie 2: Méthode par intégration (injection instantanée),1974-12-01,1,['17.120.20'],ISO/TC 113,9599,,[4639],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5550:1978 - **Identifier:** ISO 5550:1978 _(verified: appears in the quote below)_ - **Item title:** Caseins and caseinates — Determination of water content (Reference method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5550:2006 | ISO/CD 5550 | ISO/WD 5550 - **Withdrawn / published date:** 1978-11-01 _(verified: appears in the quote below)_ > 11616,IS,,ISO 5550:1978,Caseins and caseinates — Determination of water content (Reference method),Caséines et caséinates — Détermination de la teneur en eau (Méthode de référence),1978-11-01,1,['67.100.99'],ISO/TC 34/SC 5,9599,,"[41681,23035,36877]","['en','fr']",2,
Is applicable to all types of caseins and caseinates. The principle consists in drying a test portion at 102 +/- 1 degree centigrade and weighing to determine the loss of mass which is expressed as a percentage by mass.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5552:1979 - **Identifier:** ISO 5552:1979 _(verified: appears in the quote below)_ - **Item title:** Meat and meat products — Detection and enumeration of Enterobacteriaceae (Reference methods) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5552:1997 - **Withdrawn / published date:** 1979-04-01 _(verified: appears in the quote below)_ > 11618,IS,,ISO 5552:1979,Meat and meat products — Detection and enumeration of Enterobacteriaceae (Reference methods),Viandes et produits à base de viande — Recherche et dénombrement des Enterobacteriaceae (Méthodes de référence),1979-04-01,1,['07.100.30'],ISO/TC 34/SC 6,9599,,[11619],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5552:1997 - **Identifier:** ISO 5552:1997 _(verified: appears in the quote below)_ - **Item title:** Meat and meat products — Detection and enumeration of Enterobacteriaceae without resuscitation — MPN technique and colony-count technique _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 21528-2:2004 | ISO 21528-1:2004 - **Withdrawn / published date:** 1997-12-04 _(verified: appears in the quote below)_ > 11619,IS,,ISO 5552:1997,Meat and meat products — Detection and enumeration of Enterobacteriaceae without resuscitation — MPN technique and colony-count technique,Viande et produits à base de viande — Recherche et dénombrement des Enterobacteriaceae sans ressuscitation — Technique de NPP et technique de comptage de colonies,1997-12-04,2,['07.100.30'],ISO/TC 34/SC 6,9599,[11618],"[34566,34565]",['en'],15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5553:1980 - **Identifier:** ISO 5553:1980 _(verified: appears in the quote below)_ - **Item title:** Meat and meat products — Detection of polyphosphates _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5553:2024 - **Withdrawn / published date:** 1980-09-01 _(verified: appears in the quote below)_ > 11620,IS,,ISO 5553:1980,Meat and meat products — Detection of polyphosphates,Viandes et produits à base de viande — Recherche des polyphosphates,1980-09-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[82656],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5555:1983 - **Identifier:** ISO 5555:1983 _(verified: appears in the quote below)_ - **Item title:** Animal and vegetable fats and oils — Sampling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5555:1991 - **Withdrawn / published date:** 1983-11-01 _(verified: appears in the quote below)_ > 11622,IS,,ISO 5555:1983,Animal and vegetable fats and oils — Sampling,Corps gras d'origines animale et végétale — Échantillonnage,1983-11-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[11623],"['en','fr']",25, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5555:1991 - **Identifier:** ISO 5555:1991 _(verified: appears in the quote below)_ - **Item title:** Animal and vegetable fats and oils — Sampling _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5555:2001 - **Withdrawn / published date:** 1991-10-17 _(verified: appears in the quote below)_ > 11623,IS,,ISO 5555:1991,Animal and vegetable fats and oils — Sampling,Corps gras d'origines animale et végétale — Échantillonnage,1991-10-17,2,['67.200.10'],ISO/TC 34/SC 11,9599,[11622],[33287],"['en','fr']",22,"Describes methods of sampling crude or processed liquid and solid fats. This second edition cancels and replaces the first edition (1983). Annexes A, B and C are for information only.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5559:1983 - **Identifier:** ISO 5559:1983 _(verified: appears in the quote below)_ - **Item title:** Dehydrated onion — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5559:1995 - **Withdrawn / published date:** 1983-04-01 _(verified: appears in the quote below)_ > 11626,IS,,ISO 5559:1983,Dehydrated onion — Specification,Oignon déshydraté — Spécifications,1983-04-01,2,['67.220.10'],ISO/TC 34/SC 7,9599,,[11627],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 556:1980 - **Identifier:** ISO 556:1980 _(verified: appears in the quote below)_ - **Item title:** Coke (greater than 20 mm in size) — Determination of mechanical strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 556:2020 - **Withdrawn / published date:** 1980-11-01 _(verified: appears in the quote below)_ > 4644,IS,,ISO 556:1980,Coke (greater than 20 mm in size) — Determination of mechanical strength,Coke (dimension supérieure à 20 mm) — Détermination de la cohésion,1980-11-01,1,['75.160.10'],ISO/TC 27/SC 3,9599,[6557],[67874],"['en','fr']",5,"A sample of coke greater than 20 mm in size and of known size distribution is subjected to mechanical stresses ina rotating drum. The degree of breakdown of the coke is evaluated by a process of sieving and size analysis after 100 drum revolutions (Micum test) and, if desired, after 500 drum revolutions (Irsid test).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5560:1983 - **Identifier:** ISO 5560:1983 _(verified: appears in the quote below)_ - **Item title:** Dehydrated garlic — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5560:1997 - **Withdrawn / published date:** 1983-05-01 _(verified: appears in the quote below)_ > 11628,IS,,ISO 5560:1983,Dehydrated garlic — Specification,Ail déshydraté — Spécifications,1983-05-01,2,['67.220.10'],ISO/TC 34/SC 7,9599,,[11629],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5561:1981 - **Identifier:** ISO 5561:1981 _(verified: appears in the quote below)_ - **Item title:** Caraway, whole — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5561:1990 - **Withdrawn / published date:** 1981-06-01 _(verified: appears in the quote below)_ > 11630,IS,,ISO 5561:1981,"Caraway, whole — Specification",Carvi entier — Spécifications,1981-06-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[11631],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5565:1982 - **Identifier:** ISO 5565:1982 _(verified: appears in the quote below)_ - **Item title:** Vanilla (Vanilla fragrans (Salisbury) Ames) — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5565-1:1999 | ISO 5565-2:1999 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 11635,IS,,ISO 5565:1982,Vanilla (Vanilla fragrans (Salisbury) Ames) — Specification,Vanille (Vanilla fragrans (Salisbury) Ames) — Spécifications,1982-12-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,"[22116,29155]","['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5577:2000 - **Identifier:** ISO 5577:2000 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic inspection — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5577:2017 - **Withdrawn / published date:** 2000-05-04 _(verified: appears in the quote below)_ > 11644,IS,,ISO 5577:2000,Non-destructive testing — Ultrasonic inspection — Vocabulary,Essais non destructifs — Contrôle par ultrasons — Vocabulaire,2000-05-04,1,"['01.040.19','19.100']",ISO/TC 135/SC 3,9599,,[63662],"['en','fr']",45, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5577:2017 - **Identifier:** ISO 5577:2017 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Ultrasonic testing — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5577:2025 - **Withdrawn / published date:** 2017-01-27 _(verified: appears in the quote below)_ > 63662,IS,,ISO 5577:2017,Non-destructive testing — Ultrasonic testing — Vocabulary,Essais non destructifs — Contrôle par ultrasons — Vocabulaire,2017-01-27,2,"['01.040.19','19.100']",ISO/TC 135/SC 3,9599,[11644],[86363],"['en','fr']",38,ISO 5577:2017 defines the terms used in ultrasonic non-destructive testing and forms a common basis for standards and general use. This document does not cover terms used in ultrasonic testing with phased arrays.
NOTE Terms for phased array ultrasonic testing are defined in EN 16018.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5579:1985 - **Identifier:** ISO 5579:1985 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Radiographic examination of metallic materials by X- and gamma rays — Basic rules _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5579:1998 - **Withdrawn / published date:** 1985-08-08 _(verified: appears in the quote below)_ > 11646,IS,,ISO 5579:1985,Non-destructive testing — Radiographic examination of metallic materials by X- and gamma rays — Basic rules,Essais non destructifs — Contrôle des matériaux métalliques au moyen de rayons X et gamma — Règles de base,1985-08-08,1,['77.040.20'],ISO/TC 135/SC 5,9599,,[11647],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5579:1998 - **Identifier:** ISO 5579:1998 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Radiographic examination of metallic materials by X- and gamma rays — Basic rules _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5579:2013 - **Withdrawn / published date:** 1998-07-02 _(verified: appears in the quote below)_ > 11647,IS,,ISO 5579:1998,Non-destructive testing — Radiographic examination of metallic materials by X- and gamma rays — Basic rules,Essais non destructifs — Examen radiographique des matériaux métalliques au moyen de rayons X et gamma — Règles de base,1998-07-02,2,['77.040.20'],ISO/TC 135/SC 5,9599,[11646],[57742],"['en','fr']",18, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5580:1985 - **Identifier:** ISO 5580:1985 _(verified: appears in the quote below)_ - **Item title:** Non-destructive testing — Industrial radiographic illuminators — Minimum requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5580:2023 - **Withdrawn / published date:** 1985-03-14 _(verified: appears in the quote below)_ > 11648,IS,,ISO 5580:1985,Non-destructive testing — Industrial radiographic illuminators — Minimum requirements,Essais non destructifs — Négatoscopes utilisés en radiographie industrielle — Exigences minimales,1985-03-14,1,['19.100'],ISO/TC 135/SC 5,9599,,[85234],"['en','fr']",3,"The function of illuminators is to allow the viewing of radiographs. The illuminator system shall guarantee the same safety of personnel as an electric apparatus concerning maximum voltage, insulation and earthing.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 559:1977 - **Identifier:** ISO 559:1977 _(verified: appears in the quote below)_ - **Item title:** Welded or seamless steel tubes for water, sewage and gas _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 559:1991 - **Withdrawn / published date:** 1977-04-01 _(verified: appears in the quote below)_ > 4647,IS,,ISO 559:1977,"Welded or seamless steel tubes for water, sewage and gas","Tubes en acier, sans soudure ou soudés, pour canalisations d'eau, d'eaux résiduelles et de gaz",1977-04-01,1,"['91.140.80','77.140.75','91.140.60','91.140.40']",ISO/TC 5,9599,,[4648],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5593:1984 - **Identifier:** ISO 5593:1984 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5593:1997 - **Withdrawn / published date:** 1984-07-01 _(verified: appears in the quote below)_ > 11662,IS,,ISO 5593:1984,Rolling bearings — Vocabulary,Roulements — Vocabulaire,1984-07-01,1,"['21.100.20','01.040.21']",ISO/TC 4,9599,,[11663],"['en','fr']",76, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5593:1997 - **Identifier:** ISO 5593:1997 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5593:2019 - **Withdrawn / published date:** 1997-08-28 _(verified: appears in the quote below)_ > 11663,IS,,ISO 5593:1997,Rolling bearings — Vocabulary,Roulements — Vocabulaire,1997-08-28,2,"['21.100.20','01.040.21']",ISO/TC 4,9599,[11662],[50185],"['en','fr','ru']",185, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5593:1997/Amd 1:2007 - **Identifier:** ISO 5593:1997/Amd 1:2007 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Vocabulary — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5593:2019 - **Withdrawn / published date:** 2007-06-06 _(verified: appears in the quote below)_ > 43557,IS,Amd,ISO 5593:1997/Amd 1:2007,Rolling bearings — Vocabulary — Amendment 1,Roulements — Vocabulaire — Amendement 1,2007-06-06,2,"['21.100.20','01.040.21']",ISO/TC 4,9599,,[50185],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5593:2019 - **Identifier:** ISO 5593:2019 _(verified: appears in the quote below)_ - **Item title:** Rolling bearings — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5593:2023 - **Withdrawn / published date:** 2019-04-30 _(verified: appears in the quote below)_ > 50185,IS,,ISO 5593:2019,Rolling bearings — Vocabulary,Roulements — Vocabulaire,2019-04-30,3,"['21.100.20','01.040.21']",ISO/TC 4,9599,"[11663,43557]",[81829],"['en','fr','ru']",418,"This document establishes a vocabulary of terms, with their definitions, applied in the field of rolling bearings and their technology under ISO Technical Committee TC 4 management.
It includes terms related to all types of rolling bearings wherein the principal degree of freedom is continuous rotation about an axis enabled by an ordered set of rolling elements between two circular raceways such that loads can be transmitted between them in a particular range of radial and/or axial directions. Also inclu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5596:1982 - **Identifier:** ISO 5596:1982 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Gas-loaded accumulators with separators — Range of pressures and volumes, characteristic quantities and identification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5596:1999 - **Withdrawn / published date:** 1982-01-01 _(verified: appears in the quote below)_ > 11665,IS,,ISO 5596:1982,"Hydraulic fluid power — Gas-loaded accumulators with separators — Range of pressures and volumes, characteristic quantities and identification","Transmissions hydrauliques — Accumulateurs hydropneumatiques avec séparateur — Gammes de pressions et de volumes, grandeurs caractéristiques et identification",1982-01-01,1,['23.100.99'],ISO/TC 131,9599,,[29804],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5597-1:1980 - **Identifier:** ISO 5597-1:1980 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Cylinder rod and piston seals for reciprocating applications — Dimensions and tolerances of housings — Part 1: Normal series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5597:1987 - **Withdrawn / published date:** 1980-11-01 _(verified: appears in the quote below)_ > 11667,IS,,ISO 5597-1:1980,Hydraulic fluid power — Cylinder rod and piston seals for reciprocating applications — Dimensions and tolerances of housings — Part 1: Normal series,Transmissions hydrauliques — Joints d'étanchéité pour tiges de piston et pistons de vérins hydrauliques à piston — Dimensions et tolérances des logements — Partie 1: Série normale,1980-11-01,1,['23.100.20'],ISO/TC 131,9599,,[11666],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5597:1987 - **Identifier:** ISO 5597:1987 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Cylinders — Housings for piston and rod seals in reciprocating applications — Dimensions and tolerances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 5597 | ISO 5597:2010 - **Withdrawn / published date:** 1987-12-17 _(verified: appears in the quote below)_ > 11666,IS,,ISO 5597:1987,Hydraulic fluid power — Cylinders — Housings for piston and rod seals in reciprocating applications — Dimensions and tolerances,Transmissions hydrauliques — Vérins — Logements de joints d'étanchéité pour pistons et tiges de piston — Dimensions et tolérances,1987-12-17,1,['23.100.20'],ISO/TC 131/SC 7,9599,[11667],"[37637,52154]","['en','fr']",9,
Establishes the preferred range of nominal dimensions and associated tolerances for a series of housings as follows: for cylinders of 16 to 500 mm; for rods of 6 to 360 mm. For the compact series of ISO 6020-2 the ranges of dimensions are as follows: for cylinders of 25 to 200 mm; for rods of 12 to 140 mm. Does not give detai Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5597:2010 - **Identifier:** ISO 5597:2010 _(verified: appears in the quote below)_ - **Item title:** Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5597:2018 - **Withdrawn / published date:** 2010-05-11 _(verified: appears in the quote below)_ > 52154,IS,,ISO 5597:2010,Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications,Transmissions hydrauliques — Vérins — Dimensions et tolérances des logements de joints d'étanchéité pour pistons et tiges de piston à simple effet dans les applications à mouvement alternatif,2010-05-11,2,['23.100.20'],ISO/TC 131/SC 7,9599,[11666],[74704],"['en','fr']",15,"
ISO 5597:2010 establishes the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder rod and piston seal housings for reciprocating applications in the following range of dimensions: cylinders 16 mm to 500 mm and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5598:1985 - **Identifier:** ISO 5598:1985 _(verified: appears in the quote below)_ - **Item title:** Fluid power systems and components — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5598:2008 | ISO/CD 5598 - **Withdrawn / published date:** 1985-03-28 _(verified: appears in the quote below)_ > 11668,IS,,ISO 5598:1985,Fluid power systems and components — Vocabulary,Transmissions hydrauliques et pneumatiques — Vocabulaire,1985-03-28,1,"['23.100.01','01.040.23']",ISO/TC 131,9599,,"[39562,11669]","['en','fr']",90,"
Provides a comprehensive list of terms and definitions in French and English embracing devices and expressions used in the power fluid industry. It is completed by two indexes, arranged alphabetically in English and French. It applies for all fluid power systems and components excluding aerospace applications.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5598:2008 - **Identifier:** ISO 5598:2008 _(verified: appears in the quote below)_ - **Item title:** Fluid power systems and components — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5598:2020 - **Withdrawn / published date:** 2008-09-19 _(verified: appears in the quote below)_ > 39562,IS,,ISO 5598:2008,Fluid power systems and components — Vocabulary,Transmissions hydrauliques et pneumatiques — Vocabulaire,2008-09-19,2,"['23.100.01','01.040.23']",ISO/TC 131,9599,[11668],[67985],"['de','en','fr']",177,"ISO 5598:2008 establishes the vocabulary, in English, French and German, for all fluid power systems and components, excluding aerospace applications and compressed air supply installations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5599-1:1989 - **Identifier:** ISO 5599-1:1989 _(verified: appears in the quote below)_ - **Item title:** Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5599-1:2001 - **Withdrawn / published date:** 1989-11-02 _(verified: appears in the quote below)_ > 11670,IS,,ISO 5599-1:1989,Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector,Transmissions pneumatiques — Distributeurs à cinq orifices principaux — Partie 1: Plans de pose sans connecteur électrique,1989-11-02,2,['23.100.50'],ISO/TC 131/SC 5,9599,,[33074],"['en','fr']",10,"Specifies: dimensions and tolerances of the interface features; port identification; identification of the result of operator actuation. Does not apply to the functional characteristics of interfaces. Figure 1 and table 1 include the sizes 1, 2 and 3; figure 2 and table 2 include the sizes 4, 5 and 6; figure 3 and table 3 include the form and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5599-2:1990 - **Identifier:** ISO 5599-2:1990 _(verified: appears in the quote below)_ - **Item title:** Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5599-2:2001 - **Withdrawn / published date:** 1990-01-11 _(verified: appears in the quote below)_ > 11671,IS,,ISO 5599-2:1990,Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector,Transmissions pneumatiques — Distributeurs à cinq orifices principaux — Partie 2: Plans de pose avec connecteur électrique facultatif,1990-01-11,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[33075],"['en','fr']",12,"
Specifies: dimensions and tolerances of the interface features; port identification; identification of the result of operator actuation; dimensions, tolerances, and specifications for connector mateability. Does not apply to the functional characteristics of interfaces. The informative annex A contains the bibliography.
" 1 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 560:1975 - **Identifier:** ISO 560:1975 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 560-1975 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4200:1991 - **Withdrawn / published date:** 1975-08-01 _(verified: appears in the quote below)_ > 4649,IS,,ISO 560:1975,Withdrawal of ISO 560-1975,Annulation de l'ISO 560-1975,1975-08-01,1,['23.040.10'],ISO/TC 5,9599,,[9985],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5600:1979 - **Identifier:** ISO 5600:1979 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of adhesion to rigid materials using conical shaped parts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5600:1986 - **Withdrawn / published date:** 1979-02-01 _(verified: appears in the quote below)_ > 11673,IS,,ISO 5600:1979,Rubber — Determination of adhesion to rigid materials using conical shaped parts,Caoutchouc — Détermination de l'adhérence aux matériaux rigides au moyen de pièces coniques,1979-02-01,1,['83.060'],ISO/TC 45,9599,,[11674],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5600:1986 - **Identifier:** ISO 5600:1986 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of adhesion to rigid materials using conical shaped parts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5600:2007 - **Withdrawn / published date:** 1986-09-04 _(verified: appears in the quote below)_ > 11674,IS,,ISO 5600:1986,Rubber — Determination of adhesion to rigid materials using conical shaped parts,Caoutchouc — Détermination de l'adhérence aux matériaux rigides au moyen de pièces coniques,1986-09-04,2,['83.060'],ISO/TC 45/SC 2,9599,[11673],[45388],"['en','fr']",3,"Adhesion is obtained by a bonding system which may include not only the rigid material and the rubber compound, but other elements, e.g. thin alloy coatings etc. The bonding system should be adequately specified by the user, but the standard provides for evaluation of differnt types of failure related to a complex adhesion system. The standard test piece is given in a figure, the test report is prepared as a table.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5600:2007 - **Identifier:** ISO 5600:2007 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of adhesion to rigid materials using conical shaped parts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5600:2011 - **Withdrawn / published date:** 2007-06-21 _(verified: appears in the quote below)_ > 45388,IS,,ISO 5600:2007,Rubber — Determination of adhesion to rigid materials using conical shaped parts,Caoutchouc — Détermination de l'adhérence aux matériaux rigides au moyen de pièces coniques,2007-06-21,3,['83.060'],ISO/TC 45/SC 2,9599,[11674],[57733],"['en','fr']",5,"ISO 5600:2007 specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber.
The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy coatings or chemical tr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5600:2011 - **Identifier:** ISO 5600:2011 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of adhesion to rigid materials using conical shaped parts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5600:2017 - **Withdrawn / published date:** 2011-08-25 _(verified: appears in the quote below)_ > 57733,IS,,ISO 5600:2011,Rubber — Determination of adhesion to rigid materials using conical shaped parts,Caoutchouc — Détermination de l'adhérence aux matériaux rigides au moyen de pièces coniques,2011-08-25,4,['83.060'],ISO/TC 45/SC 2,9599,[45388],[72780],"['en','ru']",7,"
ISO 5600:2011 specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber.
The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy coatings or chemical tr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5600:2017 - **Identifier:** ISO 5600:2017 _(verified: appears in the quote below)_ - **Item title:** Rubber — Determination of adhesion to rigid materials using conical shaped parts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5600:2024 - **Withdrawn / published date:** 2017-06-01 _(verified: appears in the quote below)_ > 72780,IS,,ISO 5600:2017,Rubber — Determination of adhesion to rigid materials using conical shaped parts,Caoutchouc — Détermination de l'adhérence aux matériaux rigides au moyen de pièces coniques,2017-06-01,5,['83.060'],ISO/TC 45/SC 2,9599,[57733],[86888],['en'],7,"
ISO 5600:2017 specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber.
The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy coatings or chemical treatment Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 56000:2020 - **Identifier:** ISO 56000:2020 _(verified: appears in the quote below)_ - **Item title:** Innovation management — Fundamentals and vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 56000:2025 - **Withdrawn / published date:** 2020-02-18 _(verified: appears in the quote below)_ > 69315,IS,,ISO 56000:2020,Innovation management — Fundamentals and vocabulary,Management de l’innovation — Principes essentiels et vocabulaire,2020-02-18,1,"['03.100.40','03.100.01','01.040.03']",ISO/TC 279,9599,,[84436],"['ar','en','es','fr']",37,"
1.1 This document provides the vocabulary, fundamental concepts and principles of innovation management and its systematic implementation. It is applicable to:
a) organizations implementing an innovation management system or performing innovation management assessments;
b) organizations that need to improve their ability to effectively manage innovation activities;
c) users, customers and other relevant interested Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5603:1986 - **Identifier:** ISO 5603:1986 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized — Determination of adhesion to wire cord _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5603:2007 - **Withdrawn / published date:** 1986-10-23 _(verified: appears in the quote below)_ > 11675,IS,,ISO 5603:1986,"Rubber, vulcanized — Determination of adhesion to wire cord",Caoutchouc vulcanisé — Détermination de l'adhérence à un câble métallique,1986-10-23,1,['83.060'],ISO/TC 45/SC 2,9599,,[45389],"['en','fr']",12,"
Two methods are given which are applicable primarily to test pieces prepared in the laboratory under standard conditions, such as may be used for the development and control of materials and processes used in the manufacture of products reinforced with wire cord. Test pieces of cord and rubber are prepared together by vulcanizing them under pressure. In method 1 the exterior surface of the rubber is suitably reinforced. In method 2 such reinforcement is not empl Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5603:2007 - **Identifier:** ISO 5603:2007 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized — Determination of adhesion to wire cord _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5603:2011 - **Withdrawn / published date:** 2007-06-28 _(verified: appears in the quote below)_ > 45389,IS,,ISO 5603:2007,"Rubber, vulcanized — Determination of adhesion to wire cord",Caoutchouc vulcanisé — Détermination de l'adhérence à un câble métallique,2007-06-28,2,['83.060'],ISO/TC 45/SC 2,9599,[11675],[57734],"['en','fr']",14,"
ISO 5603:2007 specifies two methods for determining the adhesion strength of vulcanized rubber to wire cord which is embedded in the rubber.
The two methods are not the same and do not necessarily give the same results.
They are applicable primarily to test pieces prepared in the laboratory under standard conditions and used for the development and control of materials and processes utilized in the manufacture of products reinforced with wire Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5603:2011 - **Identifier:** ISO 5603:2011 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized — Determination of adhesion to wire cord _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5603:2017 - **Withdrawn / published date:** 2011-08-17 _(verified: appears in the quote below)_ > 57734,IS,,ISO 5603:2011,"Rubber, vulcanized — Determination of adhesion to wire cord",Caoutchouc vulcanisé — Détermination de l'adhérence à un câble métallique,2011-08-17,3,['83.060'],ISO/TC 45/SC 2,9599,[45389],[72781],"['en','ru']",16,"
ISO 5603:2011 specifies two methods for determining the adhesion strength of vulcanized rubber to wire cord which is embedded in the rubber.
The two methods do not necessarily give the same results.
They are applicable primarily to test pieces prepared in the laboratory under standard conditions and used for the development and control of materials and processes utilized in the manufacture of products reinforced with wire cord.
The metho Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5603:2017 - **Identifier:** ISO 5603:2017 _(verified: appears in the quote below)_ - **Item title:** Rubber, vulcanized — Determination of adhesion to wire cord _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5603:2024 - **Withdrawn / published date:** 2017-07-31 _(verified: appears in the quote below)_ > 72781,IS,,ISO 5603:2017,"Rubber, vulcanized — Determination of adhesion to wire cord",Caoutchouc vulcanisé — Détermination de l'adhérence à un câble métallique,2017-07-31,4,['83.060'],ISO/TC 45/SC 2,9599,[57734],[86891],['en'],18,"
ISO 5603:2017 specifies two methods for determining the adhesion strength of vulcanized rubber to wire cord which is embedded in the rubber.
The two methods do not necessarily give the same results.
They are applicable primarily to test pieces prepared in the laboratory under standard conditions and used for the development and control of materials and processes utilized in the manufacture of products reinforced with wire cord.
NOTE The m Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5608:1980 - **Identifier:** ISO 5608:1980 _(verified: appears in the quote below)_ - **Item title:** Turning and copying tool holders and cartridges for indexable (throwaway) inserts — Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5608:1989 - **Withdrawn / published date:** 1980-06-01 _(verified: appears in the quote below)_ > 11678,IS,,ISO 5608:1980,Turning and copying tool holders and cartridges for indexable (throwaway) inserts — Designation,Porte-plaquette de tournage et de copiage et cartouches — Désignation,1980-06-01,1,['25.100.10'],ISO/TC 29,9599,,[11679],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5608:1989 - **Identifier:** ISO 5608:1989 _(verified: appears in the quote below)_ - **Item title:** Turning and copying tool holders and cartridges for indexable inserts — Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5608:1995 - **Withdrawn / published date:** 1989-04-13 _(verified: appears in the quote below)_ > 11679,IS,,ISO 5608:1989,Turning and copying tool holders and cartridges for indexable inserts — Designation,Porte-plaquette de tournage et de copiage et cartouches — Désignation,1989-04-13,2,['25.100.10'],ISO/TC 29/SC 9,9599,[11678],[21905],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5608:1995 - **Identifier:** ISO 5608:1995 _(verified: appears in the quote below)_ - **Item title:** Turning and copying tool holders and cartridges for indexable inserts — Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5608:2012 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 21905,IS,,ISO 5608:1995,Turning and copying tool holders and cartridges for indexable inserts — Designation,Porte-plaquette de tournage et de copiage et cartouches — Désignation,1995-08-24,3,['25.100.10'],ISO/TC 29/SC 9,9599,[11679],[60180],"['en','fr']",11,"
Establishes a code for the designation of tool holders and cartridges with a rectangular shank for indexable inserts. Comprises symbols for the designation of dimensions. Cancels and replaces the second edition, which has been technically revised.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5609:1985 - **Identifier:** ISO 5609:1985 _(verified: appears in the quote below)_ - **Item title:** Boring bars for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5609:1989 - **Withdrawn / published date:** 1985-06-27 _(verified: appears in the quote below)_ > 11680,IS,,ISO 5609:1985,Boring bars for indexable inserts — Dimensions,Porte-plaquette de tournage intérieur — Dimensions,1985-06-27,1,['25.100.10'],ISO/TC 29/SC 9,9599,,[11681],,, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5609:1989 - **Identifier:** ISO 5609:1989 _(verified: appears in the quote below)_ - **Item title:** Boring bars for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5609:1995 - **Withdrawn / published date:** 1989-04-06 _(verified: appears in the quote below)_ > 11681,IS,,ISO 5609:1989,Boring bars for indexable inserts — Dimensions,Porte-plaquette de tournage intérieur — Dimensions,1989-04-06,2,['25.100.10'],ISO/TC 29/SC 9,9599,[11680],[22062],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5609:1989/Amd 1:1993 - **Identifier:** ISO 5609:1989/Amd 1:1993 _(verified: appears in the quote below)_ - **Item title:** Boring bars for indexable inserts — Dimensions — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5609:1995 - **Withdrawn / published date:** 1993-07-08 _(verified: appears in the quote below)_ > 11682,IS,Amd,ISO 5609:1989/Amd 1:1993,Boring bars for indexable inserts — Dimensions — Amendment 1,Porte-plaquette de tournage intérieur — Dimensions — Amendement 1,1993-07-08,2,['25.100.10'],ISO/TC 29/SC 9,9599,,[22062],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5609:1995 - **Identifier:** ISO 5609:1995 _(verified: appears in the quote below)_ - **Item title:** Boring bars for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5609:1998 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 22062,IS,,ISO 5609:1995,Boring bars for indexable inserts — Dimensions,Porte-plaquette de tournage intérieur — Dimensions,1995-08-24,3,['25.100.10'],ISO/TC 29/SC 9,9599,"[11681,11682]",[30652],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5609:1998 - **Identifier:** ISO 5609:1998 _(verified: appears in the quote below)_ - **Item title:** Boring bars for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5609-6:2012 | ISO 5609-3:2012 | ISO 5609-4:2012 | ISO 5609-1:2012 | ISO 5609-5:2012 | ISO 5609-2:2012 - **Withdrawn / published date:** 1998-11-12 _(verified: appears in the quote below)_ > 30652,IS,,ISO 5609:1998,Boring bars for indexable inserts — Dimensions,Porte-plaquette de tournage intérieur — Dimensions,1998-11-12,4,['25.100.10'],ISO/TC 29/SC 9,9599,"[22062,28429]","[60129,60126,60127,60124,60128,60125]","['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 561:1974 - **Identifier:** ISO 561:1974 _(verified: appears in the quote below)_ - **Item title:** Coal preparation plant — Graphical symbols _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 561:1989 - **Withdrawn / published date:** 1974-10-01 _(verified: appears in the quote below)_ > 4650,IS,,ISO 561:1974,Coal preparation plant — Graphical symbols,Appareils pour la préparation du charbon — Symboles graphiques,1974-10-01,1,"['01.080.30','73.120']",ISO/TC 27/SC 1,9599,,[4651],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-1:2010 - **Identifier:** ISO 5610-1:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-1:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44718,IS,,ISO 5610-1:2010,"Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions","Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 1: Vue d'ensemble, corrélation et détermination des dimensions",2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64176],"['en','fr']",16,"ISO 5610-1:2010 specifies tool holders with rectangular shank for indexable inserts and specifies their styles in relation to their dimensions according to ISO 5610‑2, ISO 5610‑3, ISO 5610‑4, ISO 5610‑5, ISO 5610‑6, ISO 5610‑7, ISO 5610‑8, ISO 5610‑9, ISO 5610‑10, ISO 5610‑11, ISO 5610‑12, ISO 5610‑13, ISO 5610‑14 and IS Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-10:2010 - **Identifier:** ISO 5610-10:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 10: Style N _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-10:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44727,IS,,ISO 5610-10:2010,Tool holders with rectangular shank for indexable inserts — Part 10: Style N,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 10: Forme N,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64185],"['en','fr']",8,"
ISO 5610-10:2010 specifies tool holders with rectangular shank, style N, i.e. with straight shank and cutting edge angle kr = 63° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-11:2010 - **Identifier:** ISO 5610-11:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 11: Style R _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-11:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44729,IS,,ISO 5610-11:2010,Tool holders with rectangular shank for indexable inserts — Part 11: Style R,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 11: Forme R,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64186],"['en','fr']",7,"ISO 5610-11:2010 specifies tool holders with rectangular shank, style R, i.e. with offset shank and cutting edge angle equal to 75° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-12:2010 - **Identifier:** ISO 5610-12:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 12: Style S _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-12:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44730,IS,,ISO 5610-12:2010,Tool holders with rectangular shank for indexable inserts — Part 12: Style S,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 12: Forme S,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64187],"['en','fr']",11,"ISO 5610-12:2010 specifies tool holders with rectangular shank, style S, i.e. with offset shank and cutting edge angle equal to 45° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-13:2010 - **Identifier:** ISO 5610-13:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 13: Style T _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-13:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44731,IS,,ISO 5610-13:2010,Tool holders with rectangular shank for indexable inserts — Part 13: Style T,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 13: Forme T,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64188],"['en','fr']",6,"ISO 5610-13:2010 specifies tool holders with rectangular shank, style T, i.e. with offset shank and cutting edge angle equal to 60° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-14:2010 - **Identifier:** ISO 5610-14:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 14: Style H _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-14:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44732,IS,,ISO 5610-14:2010,Tool holders with rectangular shank for indexable inserts — Part 14: Style H,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 14: Forme H,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64189],"['en','fr']",8,"ISO 5610-14:2010 specifies tool holders with rectangular shank, style H, i.e. with offset shank and cutting edge angle equal to 107,5° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-15:2010 - **Identifier:** ISO 5610-15:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 15: Style V _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-15:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44733,IS,,ISO 5610-15:2010,Tool holders with rectangular shank for indexable inserts — Part 15: Style V,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 15: Forme V,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64190],"['en','fr']",5,"ISO 5610-15:2010 specifies tool holders with rectangular shank, style V, i.e. with offset shank and cutting edge angle equal to 72,5° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610:1985 - **Identifier:** ISO 5610:1985 _(verified: appears in the quote below)_ - **Item title:** Single point tool holders for turning and copying, for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610:1989 - **Withdrawn / published date:** 1985-09-05 _(verified: appears in the quote below)_ > 11683,IS,,ISO 5610:1985,"Single point tool holders for turning and copying, for indexable inserts — Dimensions",Porte-plaquette de tournage et de copiage à partie active unique — Dimensions,1985-09-05,2,['25.100.10'],ISO/TC 29/SC 9,9599,,[11684],['en'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610:1989 - **Identifier:** ISO 5610:1989 _(verified: appears in the quote below)_ - **Item title:** Single-point tool holders for turning and copying, for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610:1995 - **Withdrawn / published date:** 1989-08-10 _(verified: appears in the quote below)_ > 11684,IS,,ISO 5610:1989,"Single-point tool holders for turning and copying, for indexable inserts — Dimensions",Porte-plaquette de tournage et de copiage à partie active unique — Dimensions,1989-08-10,3,['25.100.10'],ISO/TC 29/SC 9,9599,[11683],[2678],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610:1989/Amd 1:1993 - **Identifier:** ISO 5610:1989/Amd 1:1993 _(verified: appears in the quote below)_ - **Item title:** Single-point tool holders for turning and copying, for indexable inserts — Dimensions — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610:1995 - **Withdrawn / published date:** 1993-07-08 _(verified: appears in the quote below)_ > 11685,IS,Amd,ISO 5610:1989/Amd 1:1993,"Single-point tool holders for turning and copying, for indexable inserts — Dimensions — Amendment 1",Porte-plaquette de tournage et de copiage à partie active unique — Dimensions — Amendement 1,1993-07-08,3,['25.100.10'],ISO/TC 29/SC 9,9599,,[2678],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610:1995 - **Identifier:** ISO 5610:1995 _(verified: appears in the quote below)_ - **Item title:** Single-point tool holders for turning and copying, for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610:1998 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 2678,IS,,ISO 5610:1995,"Single-point tool holders for turning and copying, for indexable inserts — Dimensions",Porte-plaquette de tournage et de copiage à partie active unique — Dimensions,1995-08-24,4,['25.100.10'],ISO/TC 29/SC 9,9599,"[11685,11684]",[30657],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610:1998 - **Identifier:** ISO 5610:1998 _(verified: appears in the quote below)_ - **Item title:** Single-point tool holders for turning and copying, for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-8:2010 | ISO 5610-2:2010 | ISO 5610-9:2010 | ISO 5610-15:2010 | ISO 5610-10:2010 | ISO/WD 5610 | ISO 5610-3:2010 | ISO 5610-4:2010 | ISO 5610-5:2010 | ISO 5610-11:2010 | ISO 5610-6:2010 | ISO 5610-12:2010 | ISO 5610-13:2010 | ISO 5610-14:2010 | ISO 5610-7:2010 | ISO 5610-1:2010 - **Withdrawn / published date:** 1998-11-12 _(verified: appears in the quote below)_ > 30657,IS,,ISO 5610:1998,"Single-point tool holders for turning and copying, for indexable inserts — Dimensions",Porte-plaquette de tournage et de copiage à partie active unique — Dimensions,1998-11-12,5,['25.100.10'],ISO/TC 29/SC 9,9599,"[28429,2678]","[44725,44719,44726,44733,44727,43574,44720,44721,44722,44729,44723,44730,44731,44732,44724,44718]","['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-2:2010 - **Identifier:** ISO 5610-2:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 2: Style A _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-2:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44719,IS,,ISO 5610-2:2010,Tool holders with rectangular shank for indexable inserts — Part 2: Style A,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 2: Forme A,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64177],"['en','fr']",7,"ISO 5610-2:2010 specifies tool holders with rectangular shank, style A, i.e. with straight shank and cutting edge angle equal to 90° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials intended to be mounted by clamping and used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-3:2010 - **Identifier:** ISO 5610-3:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 3: Style B _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-3:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44720,IS,,ISO 5610-3:2010,Tool holders with rectangular shank for indexable inserts — Part 3: Style B,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 3: Forme B,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64178],"['en','fr']",7,"ISO 5610-3:2010 specifies tool holders with rectangular shank, style B, i.e. with straight shank and cutting edge angle equal to 75° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials intended to be mounted by clamping and used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-4:2010 - **Identifier:** ISO 5610-4:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 4: Style D _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-4:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44721,IS,,ISO 5610-4:2010,Tool holders with rectangular shank for indexable inserts — Part 4: Style D,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 4: Forme D,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64179],"['en','fr']",8,"ISO 5610-4:2010 specifies tool holders with rectangular shank, style D, i.e. with straight shank and cutting edge angle equal to 45° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials intended to be mounted by clamping and used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-5:2010 - **Identifier:** ISO 5610-5:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 5: Style F _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-5:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44722,IS,,ISO 5610-5:2010,Tool holders with rectangular shank for indexable inserts — Part 5: Style F,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 5: Forme F,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64180],"['en','fr']",8,"ISO 5610-5:2010 specifies tool holders with rectangular shank, style F, i.e. with straight shank and cutting edge angle equal to 90° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-6:2010 - **Identifier:** ISO 5610-6:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 6: Style G _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-6:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44723,IS,,ISO 5610-6:2010,Tool holders with rectangular shank for indexable inserts — Part 6: Style G,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 6: Forme G,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64181],"['en','fr']",8,"ISO 5610-6:2010 specifies tool holders with rectangular shank, style G, i.e. with offset shank and cutting edge angle equal to 90° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-7:2010 - **Identifier:** ISO 5610-7:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 7: Style J _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-7:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44724,IS,,ISO 5610-7:2010,Tool holders with rectangular shank for indexable inserts — Part 7: Style J,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 7: Forme J,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64182],"['en','fr']",10,"ISO 5610-7:2010 specifies tool holders with rectangular shank, style J, i.e. with offset shank and cutting edge angle equal to 93° for side cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-8:2010 - **Identifier:** ISO 5610-8:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 8: Style K _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-8:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44725,IS,,ISO 5610-8:2010,Tool holders with rectangular shank for indexable inserts — Part 8: Style K,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 8: Forme K,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64183],"['en','fr']",8,"ISO 5610-8:2010 specifies tool holders with rectangular shank, style K, i.e. with offset shank and cutting edge angle equal to 75° for end cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5610-9:2010 - **Identifier:** ISO 5610-9:2010 _(verified: appears in the quote below)_ - **Item title:** Tool holders with rectangular shank for indexable inserts — Part 9: Style L _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5610-9:2014 - **Withdrawn / published date:** 2010-07-14 _(verified: appears in the quote below)_ > 44726,IS,,ISO 5610-9:2010,Tool holders with rectangular shank for indexable inserts — Part 9: Style L,Porte-plaquette à queue rectangulaire pour plaquettes amovibles — Partie 9: Forme L,2010-07-14,1,['25.100.01'],ISO/TC 29/SC 9,9599,[30657],[64184],"['en','fr']",9,"ISO 5610-9:2010 specifies tool holders with rectangular shank, style L, i.e. with offset shank and cutting edge angle equal to 95° for end cutting.
These tool holders are primarily intended for indexable inserts made of hardmetal or other cutting materials to be mounted by clamping and to be used for turning operations.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5611:1981 - **Identifier:** ISO 5611:1981 _(verified: appears in the quote below)_ - **Item title:** Cartridges, type A, for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5611:1989 - **Withdrawn / published date:** 1981-08-01 _(verified: appears in the quote below)_ > 11686,IS,,ISO 5611:1981,"Cartridges, type A, for indexable inserts — Dimensions","Cartouches du type A, à plaquettes amovibles — Dimensions",1981-08-01,1,['25.100.01'],ISO/TC 29,9599,,[11687],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5611:1989 - **Identifier:** ISO 5611:1989 _(verified: appears in the quote below)_ - **Item title:** Cartridges, type A, for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5611:1995 - **Withdrawn / published date:** 1989-08-10 _(verified: appears in the quote below)_ > 11687,IS,,ISO 5611:1989,"Cartridges, type A, for indexable inserts — Dimensions","Cartouches du type A, à plaquettes amovibles — Dimensions",1989-08-10,2,['25.100'],ISO/TC 29/SC 9,9599,[11686],[22064],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5611:1995 - **Identifier:** ISO 5611:1995 _(verified: appears in the quote below)_ - **Item title:** Cartridges, type A, for indexable inserts — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5611-3:2015 | ISO 5611-7:2015 | ISO 5611-4:2015 | ISO 5611-11:2015 | ISO 5611-8:2015 | ISO 5611-5:2015 | ISO 5611-9:2015 | ISO 5611-6:2015 | ISO 5611-1:2015 | ISO 5611-10:2015 | ISO 5611-2:2015 | ISO 5611-12:2015 - **Withdrawn / published date:** 1995-08-24 _(verified: appears in the quote below)_ > 22064,IS,,ISO 5611:1995,"Cartridges, type A, for indexable inserts — Dimensions","Cartouches du type A, à plaquettes amovibles — Dimensions",1995-08-24,3,['25.100.01'],ISO/TC 29/SC 9,9599,[11687],"[66143,66147,66144,66151,66148,66145,66149,66146,64175,66150,66142,66161]","['en','fr']",9,"Specifies general dimensions of type A cartridges for indexable inserts and preferred cartridges. Cancels and replaces the second edition, which has been technically revised.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5612:1984 - **Identifier:** ISO 5612:1984 _(verified: appears in the quote below)_ - **Item title:** Mining — Scraper bars for chain conveyors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5612:1990 - **Withdrawn / published date:** 1984-06-01 _(verified: appears in the quote below)_ > 11689,IS,,ISO 5612:1984,Mining — Scraper bars for chain conveyors,Exploitation minière — Raclettes pour convoyeurs à chaînes,1984-06-01,1,"['53.040.20','73.100.40']",ISO/TC 82,9599,,[11690],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 562:1981 - **Identifier:** ISO 562:1981 _(verified: appears in the quote below)_ - **Item title:** Hard coal and coke — Determination of volatile matter content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 562:1998 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 4652,IS,,ISO 562:1981,Hard coal and coke — Determination of volatile matter content,Houille et coke — Détermination du taux de matières volatiles,1981-11-01,1,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,,[1464],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 562:1998 - **Identifier:** ISO 562:1998 _(verified: appears in the quote below)_ - **Item title:** Hard coal and coke — Determination of volatile matter _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 562:2010 - **Withdrawn / published date:** 1998-01-29 _(verified: appears in the quote below)_ > 1464,IS,,ISO 562:1998,Hard coal and coke — Determination of volatile matter,Houille et coke — Détermination des matières volatiles,1998-01-29,2,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[4652],[55943],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 562:2010 - **Identifier:** ISO 562:2010 _(verified: appears in the quote below)_ - **Item title:** Hard coal and coke — Determination of volatile matter _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 562:2024 - **Withdrawn / published date:** 2010-06-04 _(verified: appears in the quote below)_ > 55943,IS,,ISO 562:2010,Hard coal and coke — Determination of volatile matter,Houille et coke — Détermination des matières volatiles,2010-06-04,3,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[1464],[86976],"['en','ru']",8,ISO 562:2010 specifies a method of determining the volatile matter of hard coal and of coke. It is not applicable to brown coals and lignites.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5620:1978 - **Identifier:** ISO 5620:1978 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Filling connection for drinking water tanks on ships _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5620-1:1992 | ISO 5620-2:1992 - **Withdrawn / published date:** 1978-07-01 _(verified: appears in the quote below)_ > 11693,IS,,ISO 5620:1978,Shipbuilding — Filling connection for drinking water tanks on ships,Construction navale — Raccordement de remplissage des réservoirs à eau potable des navires,1978-07-01,1,['47.020.30'],ISO/TC 8,9599,,"[11694,11695]","['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5626:1978 - **Identifier:** ISO 5626:1978 _(verified: appears in the quote below)_ - **Item title:** Paper — Determination of folding endurance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5626:1993 - **Withdrawn / published date:** 1978-12-01 _(verified: appears in the quote below)_ > 11699,IS,,ISO 5626:1978,Paper — Determination of folding endurance,Papier — Détermination de la résistance au pliage,1978-12-01,3,['85.060'],ISO/TC 6/SC 2,9599,,[11700],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5627:1984 - **Identifier:** ISO 5627:1984 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of smoothness (Bekk method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5627:1995 - **Withdrawn / published date:** 1984-04-01 _(verified: appears in the quote below)_ > 11701,IS,,ISO 5627:1984,Paper and board — Determination of smoothness (Bekk method),Papier et carton — Détermination du lissé (Méthode Bekk),1984-04-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[20129],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5628:1990 - **Identifier:** ISO 5628:1990 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of bending stiffness by static methods — General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5628:2012 - **Withdrawn / published date:** 1990-11-22 _(verified: appears in the quote below)_ > 11703,IS,,ISO 5628:1990,Paper and board — Determination of bending stiffness by static methods — General principles,Papier et carton — Détermination de la résistance à la flexion par des méthodes statiques — Principes généraux,1990-11-22,1,['85.060'],ISO/TC 6/SC 2,9599,,[51264],"['en','fr']",5,"Specifies the general principles to be observed in the preparation of test methods for determining the bending stiffness of all types of paper and board using static methods, by applying line loading to which the mass of the test piece makes negligible contribution. In detail, it describes principle, apparatus, limitations on use of instruments, sampling, conditioning, preparation of test pieces, p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5628:2012 - **Identifier:** ISO 5628:2012 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5628:2019 - **Withdrawn / published date:** 2012-01-20 _(verified: appears in the quote below)_ > 51264,IS,,ISO 5628:2012,"Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods","Papier et carton — Détermination de la rigidité à la flexion — Principes généraux pour les méthodes à deux points, à trois points et à quatre points",2012-01-20,2,['85.060'],ISO/TC 6/SC 2,9599,[11703],[76347],"['en','fr']",10,"
ISO 5628:2012 specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods.
For paper and paperboard in a low thickness range, the two-point bendi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5629:1983 - **Identifier:** ISO 5629:1983 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of bending stiffness — Resonance method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5629:2017 - **Withdrawn / published date:** 1983-12-01 _(verified: appears in the quote below)_ > 11707,IS,,ISO 5629:1983,Paper and board — Determination of bending stiffness — Resonance method,Papier et carton — Détermination de la résistance à la flexion — Méthode par résonance,1983-12-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[69095],"['en','fr']",6,"
Applies to a wide range of papers and boards, but for some materials, such as multi-ply papers and boards, papers and boards with appreciable curl, some soft papers with grammage below about 40 g/m , the measured numerical value may not be strictly identical with the bending stiffness. It does not apply to corrugated boards.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5630-1:1982 - **Identifier:** ISO 5630-1:1982 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Accelerated ageing — Part 1: Dry heat treatment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5630-1:1991 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 11708,IS,,ISO 5630-1:1982,Paper and board — Accelerated ageing — Part 1: Dry heat treatment,Papier et carton — Vieillissement accéléré — Partie 1: Traitement à la chaleur sèche,1982-12-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[11709],['en'],2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5630-3:1986 - **Identifier:** ISO 5630-3:1986 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5630-3:1996 - **Withdrawn / published date:** 1986-12-18 _(verified: appears in the quote below)_ > 11711,IS,,ISO 5630-3:1986,Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity,Papier et carton — Vieillissement accéléré — Partie 3: Traitement à la chaleur humide à 80 degrés C et 65 % d'humidité relative,1986-12-18,1,['85.060'],ISO/TC 6/SC 2,9599,,[23402],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631-1:2009 - **Identifier:** ISO 5631-1:2009 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-1:2015 - **Withdrawn / published date:** 2009-10-13 _(verified: appears in the quote below)_ > 44135,IS,,ISO 5631-1:2009,Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees),Papier et carton — Détermination de la couleur par réflectance diffuse — Partie 1: Conditions d'éclairage intérieur de jour (C/2 degrés),2009-10-13,1,['85.060'],ISO/TC 6,9599,[11713],[66538],"['en','fr']",10,"ISO 5631-1:2009 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss.
ISO 5631-1:2009 is not applicable to coloured papers or boards which incorporate fluorescent dyes or pigments. It may be used to determine the colour of papers or boards which contain flu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631-1:2015 - **Identifier:** ISO 5631-1:2015 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-1:2022 - **Withdrawn / published date:** 2015-10-26 _(verified: appears in the quote below)_ > 66538,IS,,ISO 5631-1:2015,Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees),Papier et carton — Détermination de la couleur par réflectance diffuse — Partie 1: Conditions d'éclairage intérieur de jour (C/2 degrés),2015-10-26,2,['85.060'],ISO/TC 6,9599,[44135],[83365],"['en','fr']",13,"
ISO 5631-1:2015 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss.
ISO 5631-1:2015 is not applicable to coloured papers or boards which incorporate fluorescent dyes or pigments. It may be used to determine the colour of papers or boards which contain flu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631-2:2008 - **Identifier:** ISO 5631-2:2008 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-2:2014 - **Withdrawn / published date:** 2008-12-03 _(verified: appears in the quote below)_ > 38052,IS,,ISO 5631-2:2008,Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees),Papier et carton — Détermination de la couleur par réflectance diffuse — Partie 2: Conditions de lumière du jour extérieure (D65/10 degrés),2008-12-03,1,['85.060'],ISO/TC 6,9599,,[63058],"['en','fr']",10,"
ISO 5631-2:2008 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss.
It may be used to determine the colour of papers or boards that contain fluorescent whitening agents, provided the UV content of the illumination on the test piece has been adjusted to co Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631-2:2014 - **Identifier:** ISO 5631-2:2014 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-2:2015 - **Withdrawn / published date:** 2014-07-18 _(verified: appears in the quote below)_ > 63058,IS,,ISO 5631-2:2014,Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees),Papier et carton — Détermination de la couleur par réflectance diffuse — Partie 2: Conditions de lumière du jour extérieure (D65/10 degrés),2014-07-18,2,['85.060'],ISO/TC 6,9599,[38052],[67155],"['en','fr']",10,"
ISO 5631-2:2014 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss.
It can be used to determine the colour of papers or boards that contain fluorescent whitening agents, provided the UV content of the illumination on the test piece has been previou Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631-2:2015 - **Identifier:** ISO 5631-2:2015 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-2:2022 - **Withdrawn / published date:** 2015-10-26 _(verified: appears in the quote below)_ > 67155,IS,,ISO 5631-2:2015,Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees),Papier et carton — Détermination de la couleur par réflectance diffuse — Partie 2: Conditions de lumière du jour extérieure (D65/10 degrés),2015-10-26,3,['85.060'],ISO/TC 6,9599,[63058],[83367],"['en','fr']",13,"
ISO 5631-2:2015 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss.
It can be used to determine the colour of papers or boards that contain fluorescent whitening agents, provided the UV content of the illumination on the test piece has been previou Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631:2000 - **Identifier:** ISO 5631:2000 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour (C/2 degrees) — Diffuse reflectance method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-1:2009 - **Withdrawn / published date:** 2000-03-09 _(verified: appears in the quote below)_ > 11713,IS,,ISO 5631:2000,Paper and board — Determination of colour (C/2 degrees) — Diffuse reflectance method,Papier et carton — Détermination de la couleur (C/2 degrés) — Méthode par réflectance diffuse,2000-03-09,1,['85.060'],ISO/TC 6,9599,,[44135],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631-3:2008 - **Identifier:** ISO 5631-3:2008 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-3:2014 - **Withdrawn / published date:** 2008-12-03 _(verified: appears in the quote below)_ > 39368,IS,,ISO 5631-3:2008,Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees),Papier et carton — Détermination de la couleur par réflectance diffuse — Partie 3: Conditions d'éclairage intérieur (D50/2 degrés),2008-12-03,1,['85.060'],ISO/TC 6,9599,,[63057],"['en','fr']",10,"
ISO 5631-3:2008 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss.
ISO 5631-3:2008 is primarily intended for measuring the colour of paper and board to be used in the graphic arts industry where that industry specifies the measurement of colour under D50/2° con Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631-3:2014 - **Identifier:** ISO 5631-3:2014 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-3:2015 - **Withdrawn / published date:** 2014-07-18 _(verified: appears in the quote below)_ > 63057,IS,,ISO 5631-3:2014,Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees),Papier et carton — Détermination de la couleur par réflectance diffuse — Partie 3: Conditions d'éclairage intérieur (D50/2 degrés),2014-07-18,2,['85.060'],ISO/TC 6,9599,[39368],[67156],"['en','fr']",10,"
ISO 5631-3:2014 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss.
ISO 5631-3:2014 is primarily intended for measuring the colour of paper and board to be used in the graphic arts industry, where that industry specifies the measurement of colour under D5 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5631-3:2015 - **Identifier:** ISO 5631-3:2015 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5631-3:2022 - **Withdrawn / published date:** 2015-10-26 _(verified: appears in the quote below)_ > 67156,IS,,ISO 5631-3:2015,Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees),Papier et carton — Détermination de la couleur par réflectance diffuse — Partie 3: Conditions d'éclairage intérieur (D50/2 degrés),2015-10-26,3,['85.060'],ISO/TC 6,9599,[63057],[83369],"['en','fr']",13,"
ISO 5631-3:2015 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss.
ISO 5631-3:2015 is primarily intended for measuring the colour of paper and board to be used in the graphic arts industry, where that industry specifies the measurement of colour under D5 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5636-1:1984 - **Identifier:** ISO 5636-1:1984 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of air permeance (medium range) — Part 1: General method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 5636-1 - **Withdrawn / published date:** 1984-04-01 _(verified: appears in the quote below)_ > 11718,IS,,ISO 5636-1:1984,Paper and board — Determination of air permeance (medium range) — Part 1: General method,Papier et carton — Détermination de la perméabilité à l'air (valeur moyenne) — Partie 1: Méthode générale,1984-04-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[43433],"['en','fr']",4,"
Specfies basic requirements for apperatus and general operating procedures for determining the air permeance of paper and board in the medium air permeance range, and is applicable to papers and boards having air permeances between 1 x 10- and 1 x 10 m/(Pa.s), being unsuitable for rough-surface papers such as creped and corrugared papers, which cannot be securely clamped to avoid leakage.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5636-3:1984 - **Identifier:** ISO 5636-3:1984 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5636-3:1992 - **Withdrawn / published date:** 1984-07-01 _(verified: appears in the quote below)_ > 11720,IS,,ISO 5636-3:1984,Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method,Papier et carton — Détermination de la perméabilité à l'air (valeur moyenne) — Partie 3: Méthode Bendtsen,1984-07-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[11721],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 5636-3:1992 - **Identifier:** ISO 5636-3:1992 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5636-3:2013 - **Withdrawn / published date:** 1992-09-03 _(verified: appears in the quote below)_ > 11721,IS,,ISO 5636-3:1992,Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method,Papier et carton — Détermination de la perméabilité à l'air (valeur moyenne) — Partie 3: Méthode Bendtsen,1992-09-03,2,['85.060'],ISO/TC 6/SC 2,9599,[11720],[52431],"['en','fr']",8,"The method determines air permeance in the medium range. It is applicable to papers and boards having air permeance between 0,35 µm/(Pa·s) und 15 µm/(Pa·s). It is unsuitable for rough surfaced papers and boards, such as creped and corrugated papers, which cannot be securely clamped to avoid leakage. Annex A considers maintenance of Bendtsen testers, Annex B calibration of capillary tubes and vari Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 132](https://referencesource.org/iso-standard-supersessions/p/132/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 134](https://referencesource.org/iso-standard-supersessions/p/134/) Last verified: 2026-08-05. Review by: 2027-02-02.