ISO 4427-1:2007 specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test parameters for the test methods to which it refers.
In Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4427-1:2007/Amd 1:2015 - **Identifier:** ISO 4427-1:2007/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4427-1:2019 - **Withdrawn / published date:** 2015-03-05 _(verified: appears in the quote below)_ > 60828,IS,Amd,ISO 4427-1:2007/Amd 1:2015,Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100,Systèmes de canalisations en plastique — Tubes et raccords en polyéthylène (PE) destinés à l'alimentation en eau — Partie 1: Généralités — Amendement 1: Indice de fluidité à chaud en masse pour PE 80 et PE 100,2015-03-05,1,"['23.040.45','93.025','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[72183],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4427-1:2007/Cor 1:2008 - **Identifier:** ISO 4427-1:2007/Cor 1:2008 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4427-1:2019 - **Withdrawn / published date:** 2008-08-11 _(verified: appears in the quote below)_ > 52225,IS,Cor,ISO 4427-1:2007/Cor 1:2008,Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1,Systèmes de canalisations en plastique — Tubes et raccords en polyéthylène (PE) destinés à l'alimentation en eau — Partie 1: Généralités — Rectificatif technique 1,2008-08-11,1,"['23.040.45','93.025','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[72183],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4427:1996 - **Identifier:** ISO 4427:1996 _(verified: appears in the quote below)_ - **Item title:** Polyethylene (PE) pipes for water supply — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4427-1:2007 | ISO 4427-2:2007 - **Withdrawn / published date:** 1996-12-19 _(verified: appears in the quote below)_ > 10334,IS,,ISO 4427:1996,Polyethylene (PE) pipes for water supply — Specifications,Tubes en polyéthylène (PE) destinés à l'alimentation en eau — Spécifications,1996-12-19,1,"['93.025','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,"[40062,40063]","['en','fr']",13,"
Specifies the required properties of pipes made from polyethylene (PE) to be used for buried water mains and services and for water supply above ground both inside and outside buildings. In addition, it contains specifications for some general properties of the material from which these pipes are made, including a classification scheme.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4427-2:2007 - **Identifier:** ISO 4427-2:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4427-2:2019 - **Withdrawn / published date:** 2007-07-31 _(verified: appears in the quote below)_ > 40063,IS,,ISO 4427-2:2007,Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes,Systèmes de canalisations en plastique — Tubes et raccords en polyéthylène (PE) destinés à l'alimentation en eau — Partie 2: Tubes,2007-07-31,1,"['93.025','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,[10334],[72184],['en'],18,"ISO 4427-2:2007 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test parameters for the test methods to which it refers.
In conjunction with the other parts of ISO 4427, it is applicable Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4427-2:2007/Amd 1:2014 - **Identifier:** ISO 4427-2:2007/Amd 1:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4427-2:2019 - **Withdrawn / published date:** 2014-04-02 _(verified: appears in the quote below)_ > 64583,IS,Amd,ISO 4427-2:2007/Amd 1:2014,Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1,Systèmes de canalisations en plastique — Tubes et raccords en polyéthylène (PE) destinés à l'alimentation en eau — Partie 2: Tubes — Amendement 1,2014-04-02,1,"['93.025','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[72184],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4427-3:2007 - **Identifier:** ISO 4427-3:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4427-3:2019 - **Withdrawn / published date:** 2007-07-31 _(verified: appears in the quote below)_ > 40064,IS,,ISO 4427-3:2007,Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings,Systèmes de canalisations en plastique — Tubes et raccords en polyéthylène (PE) destinés à l'alimentation en eau — Partie 3: Raccords,2007-07-31,1,"['23.040.45','93.025','91.140.60']",ISO/TC 138/SC 2,9599,,[72185],['en'],31,"
ISO 4427-3:2007 specifies the general aspects of fittings made from polyethylene (PE) for piping systems intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test parameters for the test methods to which it refers.
In conjunction with the ot Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4427-5:2007 - **Identifier:** ISO 4427-5:2007 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4427-5:2019 - **Withdrawn / published date:** 2007-07-31 _(verified: appears in the quote below)_ > 40065,IS,,ISO 4427-5:2007,Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system,Systèmes de canalisations en plastique — Tubes et raccords en polyéthylène (PE) destinés à l'alimentation en eau — Partie 5: Aptitude à l'emploi du système,2007-07-31,1,"['23.040.45','93.025','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[72186],['en'],7,"
ISO 4427-5:2007 specifies the characteristics of the fitness for purpose of assembled piping systems made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test pa Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4433:1984 - **Identifier:** ISO 4433:1984 _(verified: appears in the quote below)_ - **Item title:** Polyolefin pipes — Resistance to chemical fluids — Immersion test method — System for preliminary classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4433-2:1997 | ISO 4433-1:1997 | ISO 4433-3:1997 | ISO 4433-4:1997 - **Withdrawn / published date:** 1984-07-01 _(verified: appears in the quote below)_ > 10336,IS,,ISO 4433:1984,Polyolefin pipes — Resistance to chemical fluids — Immersion test method — System for preliminary classification,Tubes en polyoléfines — Résistance aux fluides chimiques — Méthode d'essai par immersion — Système de classification préliminaire,1984-07-01,1,['23.040.20'],ISO/TC 138/SC 3,9599,,"[21622,21521,22531,22532]","['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4434:1977 - **Identifier:** ISO 4434:1977 _(verified: appears in the quote below)_ - **Item title:** Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1452-3:2009 - **Withdrawn / published date:** 1977-09-01 _(verified: appears in the quote below)_ > 10337,IS,,ISO 4434:1977,Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series,Raccords d'adaptation en polychlorure de vinyle (PVC) non plastifié pour tubes sous pression — Cotes de montage et dimension des filetages — Série métrique,1977-09-01,1,['23.040.45'],ISO/TC 138/SC 2,9599,,[50363],"['en','fr']",3,"
Specification of the metric series of diameters to be used and of dimensions, which are common to all types of PVC-adaptor fittings for pipes under pressure to secure the connection to existing metal pipes and/or fittings with pipe threads.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4435:1991 - **Identifier:** ISO 4435:1991 _(verified: appears in the quote below)_ - **Item title:** Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for buried drainage and sewerage systems — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4435:2003 - **Withdrawn / published date:** 1991-05-16 _(verified: appears in the quote below)_ > 10338,IS,,ISO 4435:1991,Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for buried drainage and sewerage systems — Specifications,Tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) pour les systèmes d'assainissement enterrés et les égouts souterrains — Spécifications,1991-05-16,1,"['93.030','83.140.30']",ISO/TC 138/SC 1,9599,,[36994],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4437-1:2014 - **Identifier:** ISO 4437-1:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4437-1:2024 - **Withdrawn / published date:** 2014-01-13 _(verified: appears in the quote below)_ > 59128,IS,,ISO 4437-1:2014,Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Polyéthylène (PE) — Partie 1: Généralités,2014-01-13,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[37627],[79721],"['en','ru']",14,"ISO 4437-1:2014 specifies the general properties of polyethylene (PE) compounds for the manufacture of pipes and fittings intended to be used for the supply of gaseous fuels.
It also specifies the test parameters for the test methods referred to in this International Standard.
In conjunction with ISO 4437-2, ISO 4437-3, ISO 4437-4, a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4437:1988 - **Identifier:** ISO 4437:1988 _(verified: appears in the quote below)_ - **Item title:** Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4437:1997 - **Withdrawn / published date:** 1988-01-21 _(verified: appears in the quote below)_ > 10339,IS,,ISO 4437:1988,Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification,Canalisations enterrées en polyéthylène (PE) pour réseaux de distribution de combustibles gazeux — Série métrique — Spécifications,1988-01-21,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,,[1082],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4437:1997 - **Identifier:** ISO 4437:1997 _(verified: appears in the quote below)_ - **Item title:** Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4437:2007 - **Withdrawn / published date:** 1997-08-28 _(verified: appears in the quote below)_ > 1082,IS,,ISO 4437:1997,Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications,Canalisations enterrées en polyéthylène (PE) pour réseaux de distribution de combustibles gazeux — Série métrique — Spécifications,1997-08-28,2,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[10339],[37627],"['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4437:1997/Cor 1:1999 - **Identifier:** ISO 4437:1997/Cor 1:1999 _(verified: appears in the quote below)_ - **Item title:** Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4437:2007 - **Withdrawn / published date:** 1999-11-25 _(verified: appears in the quote below)_ > 33226,IS,Cor,ISO 4437:1997/Cor 1:1999,Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1,Canalisations enterrées en polyéthylène (PE) pour réseaux de distribution de combustibles gazeux — Série métrique — Spécifications — Rectificatif technique 1,1999-11-25,2,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,,[37627],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4437-2:2014 - **Identifier:** ISO 4437-2:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4437-2:2024 - **Withdrawn / published date:** 2014-01-13 _(verified: appears in the quote below)_ > 59129,IS,,ISO 4437-2:2014,Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes,Systèmes·de·canalisations·en·matières·plastiques·pour·la·distribution·de·combustibles·gazeux·—·Polyéthylène·(PE) — Partie 2: Tuyaux,2014-01-13,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[37627],[79722],"['en','ru']",17,"
ISO 4437-2:2014 specifies the characteristics of pipes made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels.
It also specifies the test parameters for the test methods referred to in this International Standard.
In conjunction with part of ISO 4437-1, ISO 4437-3, ISO 4437-4, and ISO 4437-5, it is applic Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4437:2007 - **Identifier:** ISO 4437:2007 _(verified: appears in the quote below)_ - **Item title:** Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4437-5:2014 | ISO 4437-1:2014 | ISO 4437-2:2014 | ISO 4437-3:2014 - **Withdrawn / published date:** 2007-06-19 _(verified: appears in the quote below)_ > 37627,IS,,ISO 4437:2007,Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications,Canalisations enterrées en polyéthylène (PE) pour réseaux de distribution de combustibles gazeux — Série métrique — Spécifications,2007-06-19,3,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,"[33226,1082]","[59131,59128,59129,59130]",['en'],22,"
ISO 4437:2007 specifies the general properties of the polyethylene (PE) compounds for the manufacture of pipes, the physical and mechanical properties of the pipes made from these compounds and the requirements for the marking of such pipes, intended to be used for the supply of gaseous fuels.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4437-3:2014 - **Identifier:** ISO 4437-3:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4437-3:2024 - **Withdrawn / published date:** 2014-01-13 _(verified: appears in the quote below)_ > 59130,IS,,ISO 4437-3:2014,Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Polyéthylène (PE) — Partie 3: Raccords,2014-01-13,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,"[45807,52267,15118,52268,15119,37627,52269,15120,36293]",[79723],"['en','ru']",31,"ISO 4437-3:2014 specifies the characteristics of fusion fittings made from polyethylene (PE) as well as of mechanical fittings for piping systems in the field of the supply of gaseous fuels.
It also specifies the test parameters for the test methods referred to in this part of ISO 4437.
62613,IS,,ISO 4437-4:2015,Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves,Systèmes de canalisations en plastique pour la distribution des combustibles gazeux — Polyéthylène (PE) — Partie 4: Robinets,2015-03-25,1,"['75.200','83.140.30']",ISO/TC 138/SC 7,9599,[1361],[82300],['en'],16,
ISO 4437-4:2015 specifies the characteristics of valves made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels.
It also specifies the test parameters for the test methods referred to in this part of ISO 4437.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4437-5:2014 - **Identifier:** ISO 4437-5:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4437-5:2024 - **Withdrawn / published date:** 2014-01-13 _(verified: appears in the quote below)_ > 59131,IS,,ISO 4437-5:2014,Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system,Systèmes de canalisations en matières plastiques pour la d istribution de combustibles gazeux — Polyéthylène (PE) — Partie 5: Aptitude à l'emploi du système,2014-01-13,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[37627],[79724],['en'],11,"ISO 4437-5:2014 specifies the requirements of fitness for purpose of the polyethylene (PE) piping system to be used for the supply of gaseous fuels.
It specifies the definitions of electrofusion, socket fusion, butt fusion, and mechanical joints.
It specifies the method of preparation of test pi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4440:1980 - **Identifier:** ISO 4440:1980 _(verified: appears in the quote below)_ - **Item title:** Polyethylene (PE) pipes and fittings — Determination of melt flow rate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4440-1:1994 | ISO 4440-2:1994 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 10342,IS,,ISO 4440:1980,Polyethylene (PE) pipes and fittings — Determination of melt flow rate,Tubes et raccords en polyéthylène (PE) — Détermination de l'indice de fluidité à chaud,1980-08-01,1,"['23.040.45','23.040.20']",ISO/TC 138,9599,,"[10343,10344]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 445:1984 - **Identifier:** ISO 445:1984 _(verified: appears in the quote below)_ - **Item title:** Pallets for materials handling — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 445:1996 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 4462,IS,,ISO 445:1984,Pallets for materials handling — Vocabulary,Palettes pour la manutention et le transport de marchandises — Vocabulaire,1984-12-01,1,"['55.180.20','01.040.55']",ISO/TC 51,9599,,[4463],"['en','fr','ru']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 445:1996 - **Identifier:** ISO 445:1996 _(verified: appears in the quote below)_ - **Item title:** Pallets for materials handling — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 445:2008 - **Withdrawn / published date:** 1996-07-11 _(verified: appears in the quote below)_ > 4463,IS,,ISO 445:1996,Pallets for materials handling — Vocabulary,Palettes pour la manutention et le transport de marchandises — Vocabulaire,1996-07-11,2,"['55.180.20','01.040.55']",ISO/TC 51,9599,[4462],[42053],"['en','fr']",40, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 445:2008 - **Identifier:** ISO 445:2008 _(verified: appears in the quote below)_ - **Item title:** Pallets for materials handling — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 445:2013 - **Withdrawn / published date:** 2008-10-14 _(verified: appears in the quote below)_ > 42053,IS,,ISO 445:2008,Pallets for materials handling — Vocabulary,Palettes pour la manutention et le transport des marchandises — Vocabulaire,2008-10-14,3,"['55.180.20','01.040.55']",ISO/TC 51,9599,[4463],[61915],"['en','fr']",69,
ISO 445:2008 defines terms relating to pallets for unit load methods of materials handling.
It also includes an informative annex listing general terms relating to materials handling.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 446:1975 - **Identifier:** ISO 446:1975 _(verified: appears in the quote below)_ - **Item title:** Microcopying — ISO No. 1 Mire — Description and use in photographic documentary reproduction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 446:1991 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 4464,IS,,ISO 446:1975,Microcopying — ISO No. 1 Mire — Description and use in photographic documentary reproduction,Microcopie — Mire ISO no 1 — Description et utilisation dans la reproduction photographique des documents,1975-11-01,1,['37.080'],ISO/TC 171/SC 1,9599,,[4465],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 446:1991 - **Identifier:** ISO 446:1991 _(verified: appears in the quote below)_ - **Item title:** Micrographics — ISO character and ISO test chart No. 1 — Description and use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 446:2004 - **Withdrawn / published date:** 1991-02-14 _(verified: appears in the quote below)_ > 4465,IS,,ISO 446:1991,Micrographics — ISO character and ISO test chart No. 1 — Description and use,Micrographie — Caractère ISO et mire ISO no. 1 — Description et utilisation,1991-02-14,2,['37.080'],ISO/TC 171/SC 1,9599,"[4448,4464]",[36140],"['en','fr']",5,"Applies to the quality testing of microimages produced with a given micrographic system and allows to determine the potential legibility of documents recorded with that system. Annex A gives optional features for ISO test chart No. 1. This second edition cancels and replaces the first editions (ISO 435:1975 and ISO 446:1975), which have been merged into a single International Standard.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4463:1979 - **Identifier:** ISO 4463:1979 _(verified: appears in the quote below)_ - **Item title:** Measurement methods for building — Setting out and measurement — Permissible measuring deviations _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4463-2:1995 | ISO 4463-3:1995 | ISO 4463-1:1989 - **Withdrawn / published date:** 1979-12-01 _(verified: appears in the quote below)_ > 10355,IS,,ISO 4463:1979,Measurement methods for building — Setting out and measurement — Permissible measuring deviations,Méthodes de mesurage pour la construction — Piquetage et mesurage — Écarts de mesurage admissibles,1979-12-01,1,['91.200'],ISO/TC 59,9599,,"[10357,10358,10356]","['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4464:1980 - **Identifier:** ISO 4464:1980 _(verified: appears in the quote below)_ - **Item title:** Tolerances for building — Relationship between the different types of deviations and tolerances used for specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1803:1997 - **Withdrawn / published date:** 1980-12-01 _(verified: appears in the quote below)_ > 10359,IS,,ISO 4464:1980,Tolerances for building — Relationship between the different types of deviations and tolerances used for specification,Tolérances pour le bâtiment — Liaison entre les divers types d'écarts et de tolérances utilisés pour la spécification,1980-12-01,1,['91.010.30'],ISO/TC 59,9599,,[6440],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4468:1982 - **Identifier:** ISO 4468:1982 _(verified: appears in the quote below)_ - **Item title:** Gear hobs — Single start — Accuracy requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4468:2009 | ISO/WD 4468 - **Withdrawn / published date:** 1982-01-01 _(verified: appears in the quote below)_ > 10363,IS,,ISO 4468:1982,Gear hobs — Single start — Accuracy requirements,Fraises-mères à une entrée — Tolérances,1982-01-01,1,['21.200'],ISO/TC 60,9599,,"[39216,33093]","['en','fr']",16,"Applies to single start hobs of 1 to 40 module and 25 to 0,625 diametral pitch for helical and straight spur gears. It applies to solid and inserted blade hobs. Accuracy grades are AA, A, B and C where grade AA is the highest order of precision. Gives elemental tests for hobs and permitted tolerances for the practical test consisting of the measurement of the position of the cutting edges along a line of action which requires special equipment.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4468:2009 - **Identifier:** ISO 4468:2009 _(verified: appears in the quote below)_ - **Item title:** Gear hobs — Accuracy requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4468:2020 | ISO/NP 4468 - **Withdrawn / published date:** 2009-05-18 _(verified: appears in the quote below)_ > 39216,IS,,ISO 4468:2009,Gear hobs — Accuracy requirements,Fraises-mères — Exigences d'exactitude,2009-05-18,2,['21.200'],ISO/TC 60/SC 1,9599,[10363],"[75592,68727]",['en'],32,"ISO 4468:2009 specifies requirements for the accuracy of general-purpose hobs of 0,5 module to 40 module. These hobs are intended for producing gears which conform to ISO 53 and ISO 54. ISO 4468:2009 applies to hobs for spur and helical gears and to solid (monobloc) and inserted blade hobs.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4468:2009/Cor 1:2009 - **Identifier:** ISO 4468:2009/Cor 1:2009 _(verified: appears in the quote below)_ - **Item title:** Gear hobs — Accuracy requirements — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4468:2020 | ISO/NP 4468 - **Withdrawn / published date:** 2009-11-05 _(verified: appears in the quote below)_ > 55519,IS,Cor,ISO 4468:2009/Cor 1:2009,Gear hobs — Accuracy requirements — Technical Corrigendum 1,Fraises-mères — Exigences d'exactitude — Rectificatif technique 1,2009-11-05,2,['21.200'],ISO/TC 60/SC 1,9599,,"[75592,68727]",['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4469:1981 - **Identifier:** ISO 4469:1981 _(verified: appears in the quote below)_ - **Item title:** Wood — Determination of radial and tangential shrinkage _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13061-13:2016 | ISO/WD 13061-13 - **Withdrawn / published date:** 1981-11-01 _(verified: appears in the quote below)_ > 10364,IS,,ISO 4469:1981,Wood — Determination of radial and tangential shrinkage,Bois — Détermination des retraits radial et tangentiel,1981-11-01,1,['79.040'],ISO/TC 218,9599,,"[60075,52516]","['en','fr']",2,Specifies a method which determines the linear dimensions of test pieces after drying at a moisture content in equilibrium with the normal environment and at a moisture content equal to or greater than the saturation point of the cellular wall of wood.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 447:1973 - **Identifier:** ISO 447:1973 _(verified: appears in the quote below)_ - **Item title:** Machine tools — Direction of operation of controls _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 447:1984 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 4466,IS,,ISO 447:1973,Machine tools — Direction of operation of controls,Machines-outils — Sens de manoeuvre des organes de commande,1973-12-01,1,['25.080.01'],ISO/TC 39,9599,,[4467],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4473:1988 - **Identifier:** ISO 4473:1988 _(verified: appears in the quote below)_ - **Item title:** Coniferous and broadleaved tree sawlogs — Visible defects — Classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 4473 | ISO/DIS 24294 | ISO 24294:2013 - **Withdrawn / published date:** 1988-08-25 _(verified: appears in the quote below)_ > 10368,IS,,ISO 4473:1988,Coniferous and broadleaved tree sawlogs — Visible defects — Classification,Billes à sciages de bois résineux et feuillus — Défauts apparents — Classification,1988-08-25,1,['79.040'],ISO/TC 218,9599,,"[30570,37126,52502]","['en','fr']",2,"Refers to the terms and definitions given in ISO 4474. The following six groups are listed in a table in connection with their subgroups and varieties: Knots, shakes, defects of trunk shape, defects of wood structure, defects caused by fungi and damage.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4474:1989 - **Identifier:** ISO 4474:1989 _(verified: appears in the quote below)_ - **Item title:** Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 24294 | ISO 24294:2013 - **Withdrawn / published date:** 1989-09-07 _(verified: appears in the quote below)_ > 10369,IS,,ISO 4474:1989,Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions,Billes à sciages de bois résineux et feuillus — Défauts apparents — Termes et définitions,1989-09-07,1,"['79.040','01.040.79']",ISO/TC 218,9599,,"[37126,52502]","['en','fr','ru']",15,"Refers to ISO 4473 and is a trilingual edition. Examples are illustrated in six figures. Includes an alphabetical index in English, French and Russian.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4476:1983 - **Identifier:** ISO 4476:1983 _(verified: appears in the quote below)_ - **Item title:** Coniferous and broadleaved sawlogs — Sizes — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 24294 | ISO 24294:2013 - **Withdrawn / published date:** 1983-04-01 _(verified: appears in the quote below)_ > 10371,IS,,ISO 4476:1983,Coniferous and broadleaved sawlogs — Sizes — Vocabulary,Billes à sciages de bois résineux et feuillus — Dimensions — Vocabulaire,1983-04-01,1,"['79.040','01.040.79']",ISO/TC 218,9599,,"[37126,52502]","['en','fr','ru']",2,"The terms and definitions include the different types of ends, of diameters and other dimensions. This standard is a trilingual edition.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4480:1983 - **Identifier:** ISO 4480:1983 _(verified: appears in the quote below)_ - **Item title:** Coniferous sawlogs — Measurement of sizes and determination of volume _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13059:2011 - **Withdrawn / published date:** 1983-08-01 _(verified: appears in the quote below)_ > 10375,IS,,ISO 4480:1983,Coniferous sawlogs — Measurement of sizes and determination of volume,Billes à sciages de bois résineux — Mesurage des dimensions et détermination du volume,1983-08-01,1,['79.040'],ISO/TC 218,9599,,[52486],"['en','fr']",1,"The vocabulary given in ISO 4476 applies to the methods specified. The thickness shall be taken as the middle diameter or the diameter of the upper end. The length shall be measured in metres, rounded to two decimal places. The volume shall be determined in cubic metres to two decimal places.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4489:1978 - **Identifier:** ISO 4489:1978 _(verified: appears in the quote below)_ - **Item title:** Sintered hardmetals — Sampling and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4489:2019 - **Withdrawn / published date:** 1978-06-01 _(verified: appears in the quote below)_ > 10381,IS,,ISO 4489:1978,Sintered hardmetals — Sampling and testing,Métaux-durs frittés — Échantillonnage et essais,1978-06-01,1,['77.160'],ISO/TC 119/SC 4,9599,,[74887],"['en','fr']",1,Applies to the determination of the physical and mechanical properties of sintered hardmetals. Defines the terms 'lot' and 'test sample' and specifies test report.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 449:1979 - **Identifier:** ISO 449:1979 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Magnetic compasses and binnacles, class A _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 449:1997 - **Withdrawn / published date:** 1979-04-01 _(verified: appears in the quote below)_ > 4469,IS,,ISO 449:1979,"Shipbuilding — Magnetic compasses and binnacles, class A","Construction navale — Compas magnétiques et habitacles, classe A",1979-04-01,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[4470],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 449:1997 - **Identifier:** ISO 449:1997 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class A _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 25862:2009 - **Withdrawn / published date:** 1997-06-19 _(verified: appears in the quote below)_ > 4470,IS,,ISO 449:1997,"Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class A","Navires et technologie maritime — Compas magnétiques, habitacles et alidades — Classe A",1997-06-19,2,['47.020.70'],ISO/TC 8/SC 6,9599,[4469],[43301],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4490:1978 - **Identifier:** ISO 4490:1978 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of flowability by means of a calibrated funnel (Hall flowmeter) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4490:2001 - **Withdrawn / published date:** 1978-07-01 _(verified: appears in the quote below)_ > 10382,IS,,ISO 4490:1978,Metallic powders — Determination of flowability by means of a calibrated funnel (Hall flowmeter),Poudres métalliques — Détermination de l'aptitude à l'écoulement au moyen d'un entonnoir calibré (Appareil de Hall),1978-07-01,1,['77.160'],ISO/TC 119/SC 2,9599,,[31605],"['en','fr']",3,"The method is applicable only to powders which flow freely through the specified test orifice. It measures the time required for 50 g of a metallic powder to flow through the orifice of a calibrated funnel. Specifies apparatus, calibration of the funnel, sampling, procedure, expression of results and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4490:2001 - **Identifier:** ISO 4490:2001 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of flow time by means of a calibrated funnel (Hall flowmeter) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4490:2008 - **Withdrawn / published date:** 2001-12-20 _(verified: appears in the quote below)_ > 31605,IS,,ISO 4490:2001,Metallic powders — Determination of flow time by means of a calibrated funnel (Hall flowmeter),Poudres métalliques — Détermination du temps d'écoulement au moyen d'un entonnoir calibré (appareil de Hall),2001-12-20,2,['77.160'],ISO/TC 119/SC 2,9599,[10382],[50688],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4490:2008 - **Identifier:** ISO 4490:2008 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4490:2014 - **Withdrawn / published date:** 2008-05-27 _(verified: appears in the quote below)_ > 50688,IS,,ISO 4490:2008,Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter),Poudres métalliques — Détermination du temps d'écoulement au moyen d'un entonnoir calibré (appareil de Hall),2008-05-27,3,['77.160'],ISO/TC 119/SC 2,9599,[31605],[65132],"['en','fr','ru']",4,"ISO 4490:2008 specifies a method for determining the flow rate of metallic powders, including powders for hardmetals, by means of a calibrated funnel (Hall flowmeter).
The method is applicable only to powders which flow freely through the specified test orifice.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4490:2014 - **Identifier:** ISO 4490:2014 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4490:2018 - **Withdrawn / published date:** 2014-08-07 _(verified: appears in the quote below)_ > 65132,IS,,ISO 4490:2014,Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter),Poudres métalliques — Détermination du temps d'écoulement au moyen d'un entonnoir calibré (appareil de Hall),2014-08-07,4,['77.160'],ISO/TC 119/SC 2,9599,[50688],[69218],"['en','fr']",4,"ISO 4490:2014 specifies a method for determining the flow rate of metallic powders, including powders for hard metals, by means of a calibrated funnel (Hall flowmeter). The method is applicable only to powders which flow freely through the specified test orifice.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4491-1:1989 - **Identifier:** ISO 4491-1:1989 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of oxygen content by reduction methods — Part 1: General guidelines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4491-1:2023 - **Withdrawn / published date:** 1989-09-28 _(verified: appears in the quote below)_ > 10384,IS,,ISO 4491-1:1989,Metallic powders — Determination of oxygen content by reduction methods — Part 1: General guidelines,Poudres métalliques — Dosage de l'oxygène par les méthodes de réduction — Partie 1: Directives générales,1989-09-28,1,['77.160'],ISO/TC 119/SC 2,9599,,[85817],"['en','fr']",3,"Gives some recommendations for the correct interpretation of the results obtained. The test methods are applicable generally to all powders of metals, alloys, carbides and mixtures thereof. The constituents of the powder shall be non-volatile and free of lubricant or organic binder. The limitations of the methods which depend upon the nature of the analysed metal are discussed in clause 4. 10383,IS,,ISO 4491:1978,Metallic powders — Determination of loss of mass on hydrogen reduction (hydrogen loss),Poudres métalliques — Détermination de la perte de masse après réduction par l'hydrogène (perte dans l'hydrogène),1978-06-01,1,['77.160'],ISO/TC 119/SC 2,9599,,[10385],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4491-2:1989 - **Identifier:** ISO 4491-2:1989 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of oxygen content by reduction methods — Part 2: Loss of mass on hydrogen reduction (hydrogen loss) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4491-2:1997 - **Withdrawn / published date:** 1989-09-28 _(verified: appears in the quote below)_ > 10385,IS,,ISO 4491-2:1989,Metallic powders — Determination of oxygen content by reduction methods — Part 2: Loss of mass on hydrogen reduction (hydrogen loss),Poudres métalliques — Dosage de l'oxygène par les méthodes de réduction — Partie 2: Perte de masse par réduction dans l'hydrogène (perte dans l'hydrogène),1989-09-28,1,['77.160'],ISO/TC 119/SC 2,9599,[10383],[25354],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4491-2:1997 - **Identifier:** ISO 4491-2:1997 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of oxygen content by reduction methods — Part 2: Loss of mass on hydrogen reduction (hydrogen loss) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4491-2:2023 - **Withdrawn / published date:** 1997-04-03 _(verified: appears in the quote below)_ > 25354,IS,,ISO 4491-2:1997,Metallic powders — Determination of oxygen content by reduction methods — Part 2: Loss of mass on hydrogen reduction (hydrogen loss),Poudres métalliques — Dosage de l'oxygène par les méthodes de réduction — Partie 2: Perte de masse par réduction dans l'hydrogène (perte dans l'hydrogène),1997-04-03,2,['77.160'],ISO/TC 119/SC 2,9599,[10385],[84162],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4491-3:1989 - **Identifier:** ISO 4491-3:1989 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of oxygen content by reduction methods — Part 3: Hydrogen-reducible oxygen _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4491-3:1997 - **Withdrawn / published date:** 1989-09-28 _(verified: appears in the quote below)_ > 10386,IS,,ISO 4491-3:1989,Metallic powders — Determination of oxygen content by reduction methods — Part 3: Hydrogen-reducible oxygen,Poudres métalliques — Dosage de l'oxygène par les méthodes de réduction — Partie 3: oxygène réductible par l'hydrogène,1989-09-28,1,['77.160'],ISO/TC 119/SC 2,9599,[10390],[25355],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4491-3:1997 - **Identifier:** ISO 4491-3:1997 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of oxygen content by reduction methods — Part 3: Hydrogen-reducible oxygen _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4491-3:2025 - **Withdrawn / published date:** 1997-03-27 _(verified: appears in the quote below)_ > 25355,IS,,ISO 4491-3:1997,Metallic powders — Determination of oxygen content by reduction methods — Part 3: Hydrogen-reducible oxygen,Poudres métalliques — Dosage de l'oxygène par les méthodes de réduction — Partie 3: Oxygène réductible par l'hydrogène,1997-03-27,2,['77.160'],ISO/TC 119/SC 2,9599,[10386],[90535],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4491-4:1989 - **Identifier:** ISO 4491-4:1989 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of oxygen content by reduction methods — Part 4: Total oxygen by reduction-extraction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4491-4:2013 - **Withdrawn / published date:** 1989-09-28 _(verified: appears in the quote below)_ > 10387,IS,,ISO 4491-4:1989,Metallic powders — Determination of oxygen content by reduction methods — Part 4: Total oxygen by reduction-extraction,Poudres métalliques — Dosage de l'oxygène par les méthodes de réduction — Partie 4: Oxygène total par réduction-extraction,1989-09-28,1,['77.160'],ISO/TC 119/SC 2,9599,,[61879],"['en','fr']",4,"
The test method is applicable to all powders of metals, alloys, carbides and mixtures thereof which are non-volatile under the test conditions. The sample may be in powder or compact form. The test is not applicable if the powder contains a lubricant or binder. This part of ISO 4491 shall be read in conjunction with ISO 4491-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4491-4:2013 - **Identifier:** ISO 4491-4:2013 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of oxygen content by reduction methods — Part 4: Total oxygen by reduction-extraction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4491-4:2019 - **Withdrawn / published date:** 2013-05-02 _(verified: appears in the quote below)_ > 61879,IS,,ISO 4491-4:2013,Metallic powders — Determination of oxygen content by reduction methods — Part 4: Total oxygen by reduction-extraction,Poudres métalliques — Dosage de l'oxygène par les méthodes de réduction — Partie 4: Oxygène total par réduction-extraction,2013-05-02,2,['77.160'],ISO/TC 119/SC 2,9599,[10387],[77184],"['en','fr']",5,"ISO 4491-4:2013 specifies a method for the determination of the total oxygen content of metallic powders by reduction-extraction at high temperature.
By agreement, this method is also applicable to the determination of the total oxygen content of sintered metal materials.
The method is applicable to all powders of metals, alloys, carbide Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4492:1978 - **Identifier:** ISO 4492:1978 _(verified: appears in the quote below)_ - **Item title:** Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4492:1985 - **Withdrawn / published date:** 1978-07-01 _(verified: appears in the quote below)_ > 10388,IS,,ISO 4492:1978,"Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering",Poudres métalliques à l'exclusion des poudres pour métaux-durs — Détermination des changements dimensionnels liés à la compression et au frittage,1978-07-01,1,['77.160'],ISO/TC 119,9599,,[10389],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4492:1985 - **Identifier:** ISO 4492:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4492:2013 - **Withdrawn / published date:** 1985-06-20 _(verified: appears in the quote below)_ > 10389,IS,,ISO 4492:1985,"Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering",Poudres métalliques à l'exclusion des poudres pour métaux-durs — Détermination de changements dimensionnels liés à la compression et au frittage,1985-06-20,2,['77.160'],ISO/TC 119/SC 2,9599,[10388],[61878],"['en','fr']",5,"
This second edition cancels and replaces the first edition (i. e. ISO 4492:1978). The method is applicable to the determination of three types of dimensional changes involved with the processing of metallic powders. Gives principle, test parameters, symbols and designations, apparatus, sampling, procedure, expressio Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4492:2013 - **Identifier:** ISO 4492:2013 _(verified: appears in the quote below)_ - **Item title:** Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4492:2017 - **Withdrawn / published date:** 2013-03-14 _(verified: appears in the quote below)_ > 61878,IS,,ISO 4492:2013,"Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering",Poudres métalliques à l'exclusion des poudres pour métaux-durs — Détermination de changements dimensionnels liés à la compression et au frittage,2013-03-14,3,['77.160'],ISO/TC 119/SC 2,9599,[10389],[72857],"['en','fr']",8,"
ISO 4492:2013 specifies a method by which the dimensional changes associated with compacting and sintering of metallic powders are compared with those of a reference powder when processed under similar conditions.
The method applies to the determination of three types of dimensional changes involved with the p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4493:1981 - **Identifier:** ISO 4493:1981 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of hydrogen reducible oxygen content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4491-3:1989 - **Withdrawn / published date:** 1981-08-01 _(verified: appears in the quote below)_ > 10390,IS,,ISO 4493:1981,Metallic powders — Determination of hydrogen reducible oxygen content,Poudres métalliques — Détermination de la teneur en oxygène réductible par l'hydrogène,1981-08-01,1,['77.160'],ISO/TC 119/SC 2,9599,,[10386],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4495:1978 - **Identifier:** ISO 4495:1978 _(verified: appears in the quote below)_ - **Item title:** Lubricated metallic powders — Determination of lubricant content — Soxhlet extraction method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13944:1996 - **Withdrawn / published date:** 1978-08-01 _(verified: appears in the quote below)_ > 10391,IS,,ISO 4495:1978,Lubricated metallic powders — Determination of lubricant content — Soxhlet extraction method,Poudres métalliques lubrifiées — Détermination de la teneur en lubrifiant — Méthode d'extraction au Soxhlet,1978-08-01,1,['77.160'],ISO/TC 119/SC 2,9599,,[23395],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4496:1978 - **Identifier:** ISO 4496:1978 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of acid insoluble content in iron, copper, tin and bronze powders _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 4496 | ISO 4496:2017 - **Withdrawn / published date:** 1978-08-01 _(verified: appears in the quote below)_ > 10392,IS,,ISO 4496:1978,"Metallic powders — Determination of acid insoluble content in iron, copper, tin and bronze powders","Poudres métalliques — Détermination de la teneur en insolubles dans les acides pour les poudres de fer, de cuivre, d'étain et de bronze",1978-08-01,1,['77.160'],ISO/TC 119/SC 2,9599,,"[34926,69210]","['en','fr']",3,"
The insoluble matter is generally considered to be acid-insoluble silica and silicates, carbides, alumina, and clays. The methods are applicable to lubricant-free powders. ISO 4496 specifies apparatus and reagents, sampling, procedure, expression of results and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4497:1983 - **Identifier:** ISO 4497:1983 _(verified: appears in the quote below)_ - **Item title:** Metallic powders — Determination of particle size by dry sieving _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 4497 | ISO/WD 4497 | ISO 4497:2020 | ISO/PWI 4497 - **Withdrawn / published date:** 1983-06-01 _(verified: appears in the quote below)_ > 10393,IS,,ISO 4497:1983,Metallic powders — Determination of particle size by dry sieving,Poudres métalliques — Détermination de la granulométrie par tamisage à sec,1983-06-01,1,['77.160'],ISO/TC 119/SC 2,9599,,"[1980,34927,77183,69235]","['en','fr']",2,"The method is applicable to dry, unlubricated powders, but not applicable to powders in which the morphology differs markedly from being equiaxial, for example flake-type powders. Is not applicable to metallic powders having a particle size wholly or mostly unter 45 /u. Specifies principle, apparatus, preparation of test portion, procedure, expression of results and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4498-1:1978 - **Identifier:** ISO 4498-1:1978 _(verified: appears in the quote below)_ - **Item title:** Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4498-1:1990 - **Withdrawn / published date:** 1978-07-01 _(verified: appears in the quote below)_ > 10394,IS,,ISO 4498-1:1978,"Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness",Matériaux métalliques frittés à l'exclusion des métaux-durs — Détermination de la dureté apparente — Partie 1: Matériaux ayant essentiellement une dureté uniforme dans la section,1978-07-01,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,[10395],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4498-1:1990 - **Identifier:** ISO 4498-1:1990 _(verified: appears in the quote below)_ - **Item title:** Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 4498 | ISO 4498:2005 - **Withdrawn / published date:** 1990-08-23 _(verified: appears in the quote below)_ > 10395,IS,,ISO 4498-1:1990,"Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness",Matériaux métalliques frittés à l'exclusion des métaux-durs - Détermination de la dureté apparente — Partie 1: Matériaux ayant essentiellement une dureté uniforme dans la section,1990-08-23,2,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,[10394],"[25003,39961]","['en','fr']",3,"Applies to sintered materials not subjected to heat treatment and sintered materials heat treated in such a way that hardness is essentially uniform to a depth of at least 5 mm below the surface. Gives apparatus, sampling and preparation of test Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4498-2:1981 - **Identifier:** ISO 4498-2:1981 _(verified: appears in the quote below)_ - **Item title:** Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 4498 | ISO 4498:2005 - **Withdrawn / published date:** 1981-12-01 _(verified: appears in the quote below)_ > 10396,IS,,ISO 4498-2:1981,"Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen",Matériaux métalliques frittés à l'exclusion des métaux-durs — Détermination de la dureté apparente — Partie 2: Matériaux ferreux durcis en surface par enrichissement superficiel en carbone ou carbone et azote,1981-12-01,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,"[25003,39961]","['en','fr']",2,"
Applies to sintered materials which have been heat treated in such a way that hardness is not uniform in the section to a depth of 5 mm below the surface (by treatments such as carburizing, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4498:2005 - **Identifier:** ISO 4498:2005 _(verified: appears in the quote below)_ - **Item title:** Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4498:2010 - **Withdrawn / published date:** 2005-06-13 _(verified: appears in the quote below)_ > 39961,IS,,ISO 4498:2005,"Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness","Matériaux métalliques frittés, à l'exclusion des métaux-durs — Détermination de la dureté apparente et de la microdureté",2005-06-13,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,"[10396,10395]",[55425],"['en','fr']",12,"
ISO 4498:2005 specifies methods of hardness testing of sintered metal materials, excluding hardmetals.
Procedure 1 determines the apparent hardness of the whole material.
Procedure 2 determines the microhardness of the metal phase.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4499-1:2008 - **Identifier:** ISO 4499-1:2008 _(verified: appears in the quote below)_ - **Item title:** Hardmetals — Metallographic determination of microstructure — Part 1: Photomicrographs and description _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4499-1:2020 - **Withdrawn / published date:** 2008-09-15 _(verified: appears in the quote below)_ > 43500,IS,,ISO 4499-1:2008,Hardmetals — Metallographic determination of microstructure — Part 1: Photomicrographs and description,Métaux-durs — Détermination métallographique de la microstructure — Partie 1: Prises de vue photomicrographiques et description,2008-09-15,1,"['77.160','77.040.99']",ISO/TC 119/SC 4,9599,[10398],[74883],"['en','fr']",9,ISO 4499-1:2008 specifies the methods of metallographic determination of the microstructure of hardmetals using photomicrographs.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4499:1978 - **Identifier:** ISO 4499:1978 _(verified: appears in the quote below)_ - **Item title:** Hardmetals — Metallographic determination of microstructure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4499-1:2008 | ISO 4499-2:2008 - **Withdrawn / published date:** 1978-08-01 _(verified: appears in the quote below)_ > 10398,IS,,ISO 4499:1978,Hardmetals — Metallographic determination of microstructure,Métaux-durs — Détermination métallographique de la microstructure,1978-08-01,1,"['77.160','77.040.99']",ISO/TC 119/SC 4,9599,,"[43500,43501]","['en','fr']",4,"Specifies symbols and designations, apparatus, preparation of test- pieces, procedure and test report. Figures show the different phases.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4499-2:2008 - **Identifier:** ISO 4499-2:2008 _(verified: appears in the quote below)_ - **Item title:** Hardmetals — Metallographic determination of microstructure — Part 2: Measurement of WC grain size _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4499-2:2020 - **Withdrawn / published date:** 2008-09-15 _(verified: appears in the quote below)_ > 43501,IS,,ISO 4499-2:2008,Hardmetals — Metallographic determination of microstructure — Part 2: Measurement of WC grain size,Métaux-durs — Détermination métallographique de la microstructure — Partie 2: Mesurage de la taille des grains de WC,2008-09-15,1,"['77.160','77.040.99']",ISO/TC 119/SC 4,9599,[10398],[74884],"['en','fr']",17,"ISO 4499-2:2008 gives guidelines for the measurement of hardmetal grain size by metallographic techniques only using optical or electron microscopy. It is intended for sintered WC/Co hardmetals (also called cemented carbides or cermets) containing primarily WC as the hard phase. It is also intended for measuring the grain size and distribution by the linear-in Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 45:1980 - **Identifier:** ISO 45:1980 _(verified: appears in the quote below)_ - **Item title:** Aircraft — Pressure refuelling connections _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 45:1990 - **Withdrawn / published date:** 1980-05-01 _(verified: appears in the quote below)_ > 3677,IS,,ISO 45:1980,Aircraft — Pressure refuelling connections,Aéronefs — Raccords de remplissage sous pression en combustible à bord des aéronefs,1980-05-01,1,"['49.100','49.050']",ISO/TC 20/SC 10,9599,,[3678],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 450:1976 - **Identifier:** ISO 450:1976 _(verified: appears in the quote below)_ - **Item title:** Aircraft — Connection for water of drinkable quality _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 17775:2006 - **Withdrawn / published date:** 1976-06-01 _(verified: appears in the quote below)_ > 4471,IS,,ISO 450:1976,Aircraft — Connection for water of drinkable quality,Aéronefs — Raccord pour l'alimentation en eau potable,1976-06-01,1,"['49.100','49.080']",ISO/TC 20/SC 9,9599,,[40698],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4504:2023 - **Identifier:** ISO 4504:2023 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polyethylene (PE) — Determination of co-monomer content by solution state 13C-NMR spectrometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4504:2025 - **Withdrawn / published date:** 2023-06-16 _(verified: appears in the quote below)_ > 80039,IS,,ISO 4504:2023,Plastics — Polyethylene (PE) — Determination of co-monomer content by solution state 13C-NMR spectrometry,Plastiques — polyéthylène (PE) — Détermination de la teneur en co-monomères par spectroscopie RMN du carbone 13,2023-06-16,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[88256],['en'],25,
This document specifies two methods for the determination of co-monomer contents of polyethylene products by solution state 13C-NMR spectrometry (nuclear magnetic resonance spectrometry):
Specifies a method of determining the ultimate strength and proof stress of hardmetals under uniaxial compressive loads: a test piece, placed between two hardmetal bearing blocks, is axial loaded, until the intended deformation occurs or until the test apparatus, test piece, procedure, expression of results and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4507:1978 - **Identifier:** ISO 4507:1978 _(verified: appears in the quote below)_ - **Item title:** Sintered ferrous materials, carburized or carbonitrided — Determination and verification of effective case depth by the Vickers microhardness testing method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4507:2000 - **Withdrawn / published date:** 1978-09-01 _(verified: appears in the quote below)_ > 10403,IS,,ISO 4507:1978,"Sintered ferrous materials, carburized or carbonitrided — Determination and verification of effective case depth by the Vickers microhardness testing method","Matériaux ferreux frittés, cémentés ou carbonitrurés — Détermination et vérification de la profondeur effective de cémentation par le mesurage de la microdureté Vickers",1978-09-01,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,[22231],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4510-1:1986 - **Identifier:** ISO 4510-1:1986 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery — Service tools — Part 1: Common maintenance and adjustment tools _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4510-1:1987 - **Withdrawn / published date:** 1986-06-26 _(verified: appears in the quote below)_ > 10405,IS,,ISO 4510-1:1986,Earth-moving machinery — Service tools — Part 1: Common maintenance and adjustment tools,Engins de terrassement — Outils d'entretien et de dépannage — Partie 1: Outils courants pour l'entretien et les réglages,1986-06-26,1,['53.100'],ISO/TC 127/SC 3,9599,,[10406],"['en','fr']",, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4510:1976 - **Identifier:** ISO 4510:1976 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery — Maintenance and adjustment tools _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4510-1:1987 - **Withdrawn / published date:** 1976-12-01 _(verified: appears in the quote below)_ > 10404,IS,,ISO 4510:1976,Earth-moving machinery — Maintenance and adjustment tools,Engins de terrassement — Outils pour l'entretien et le réglage,1976-12-01,1,['53.100'],ISO/TC 127/SC 3,9599,,[10406],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4510-2:1986 - **Identifier:** ISO 4510-2:1986 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery — Service tools — Part 2: Common repair tools — Mechanical pullers and pushers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4510-2:1996 - **Withdrawn / published date:** 1986-06-26 _(verified: appears in the quote below)_ > 10407,IS,,ISO 4510-2:1986,Earth-moving machinery — Service tools — Part 2: Common repair tools — Mechanical pullers and pushers,Engins de terrassement — Outils d'entretien et de dépannage — Partie 2: Outils de réparation courants — Extracteurs mécaniques par traction et par pression,1986-06-26,1,['53.100'],ISO/TC 127/SC 3,9599,,[22996],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4513:1978 - **Identifier:** ISO 4513:1978 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 4513 | ISO 4513:2003 - **Withdrawn / published date:** 1978-02-01 _(verified: appears in the quote below)_ > 10410,IS,,ISO 4513:1978,Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location,Véhicules routiers — Visibilité — Méthode de détermination des ellipses oculaires correspondant à l'emplacement des yeux des conducteurs,1978-02-01,1,['43.040.60'],ISO/TC 22,9599,,"[22860,36126]","['en','fr']",11,"Establishes two-dimensional eyellipses representative of driver eye locations corresponding to the 90th, 95th, and 99th percentiles. The statistical representation of the driver's eye location contained in this Standard applies as a design tool to those road vehicles referred to in subclause 3.1.1 of ISO 3833. Some figures illustrate shapes and reference quantiti Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4513:2003 - **Identifier:** ISO 4513:2003 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4513:2010 - **Withdrawn / published date:** 2003-10-16 _(verified: appears in the quote below)_ > 36126,IS,,ISO 4513:2003,Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location,Véhicules routiers — Visibilité — Méthode de détermination des ellipses oculaires correspondant à l'emplacement des yeux des conducteurs,2003-10-16,2,['43.020'],ISO/TC 22,9599,[10410],[45845],['en'],19,"
ISO 4513:2003 specifies a method for establishing an eyellipse for locating driver's eyes inside a road vehicle for the purpose of measuring the driver's field of view. Elliptical (eyellipse) models in both two and three dimensions are used to represent 95th and 99th percentiles of driver eye locations. Its procedures, which differ depending on the type of vehicle considere Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4513:2010 - **Identifier:** ISO 4513:2010 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4513:2022 - **Withdrawn / published date:** 2010-05-10 _(verified: appears in the quote below)_ > 45845,IS,,ISO 4513:2010,Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location,Véhicules routiers — Visibilité — Méthode de détermination des ellipses oculaires correspondant à l'emplacement des yeux des conducteurs,2010-05-10,3,['43.020'],ISO/TC 22/SC 35,9599,[36126],[72001],['en'],34,"
ISO 4513:2010 establishes the location of drivers' eyes inside a vehicle. Elliptical (eyellipse) models in three dimensions are used to represent tangent cut-off percentiles of driver eye locations. Procedures are provided to construct 95th and 99th percentile tangent cut-off eyellipses for a 50/50 gender mix, adult user population.
Neck pivot, P, points are def Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4516:1980 - **Identifier:** ISO 4516:1980 _(verified: appears in the quote below)_ - **Item title:** Metallic and related coatings — Vickers and Knoop microhardness tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 4516 | ISO 4516:2002 - **Withdrawn / published date:** 1980-05-01 _(verified: appears in the quote below)_ > 10412,IS,,ISO 4516:1980,Metallic and related coatings — Vickers and Knoop microhardness tests,Revêtements métalliques — Essais de microdureté Vickers et Knoop,1980-05-01,1,['25.220.40'],ISO/TC 107,9599,,"[10413,31876]","['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4516:2002 - **Identifier:** ISO 4516:2002 _(verified: appears in the quote below)_ - **Item title:** Metallic and other inorganic coatings — Vickers and Knoop microhardness tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4545-1:2023 | ISO 6507-1:2023 - **Withdrawn / published date:** 2002-06-20 _(verified: appears in the quote below)_ > 31876,IS,,ISO 4516:2002,Metallic and other inorganic coatings — Vickers and Knoop microhardness tests,Revêtements métalliques et autres revêtements inorganiques — Essais de microdureté Vickers et Knoop,2002-06-20,2,['25.220.40'],ISO/TC 164/SC 3,9599,[10412],"[83897,83898]","['en','fr']",12,"
ISO 4516 describes the application of the Vickers and Knoop micro-indentation tests for determining the microhardness of metallic and other inorganic coatings. This method is applicable where indenter forces generally need to be below 10 N, e.g., for electrodeposited coatings, autocatalytic coatings, sprayed coatings and anodic coatings on aluminium. It is applicable to measurements normal to the coate Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4518:1980 - **Identifier:** ISO 4518:1980 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Measurement of coating thickness — Profilometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4518:2021 | ISO/WD 4518 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 10414,IS,,ISO 4518:1980,Metallic coatings — Measurement of coating thickness — Profilometric method,Revêtements métalliques — Mesurage de l'épaisseur — Méthode profilométrique,1980-08-01,1,['25.220.40'],ISO/TC 107,9599,,"[78375,10415]","['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4521:1985 - **Identifier:** ISO 4521:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 4521 | ISO/CD 4521 | ISO 4521:2008 - **Withdrawn / published date:** 1985-02-14 _(verified: appears in the quote below)_ > 10419,IS,,ISO 4521:1985,Metallic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes,Revêtements métalliques — Dépôts électrolytiques d'argent et d'alliages d'argent pour applications industrielles,1985-02-14,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[33857,10420,44332]","['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4522-1:1985 - **Identifier:** ISO 4522-1:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Test methods for electrodeposited silver and silver alloy coatings — Part 1: Determination of coating thickness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 4521 | ISO/CD 4521 | ISO 4521:2008 - **Withdrawn / published date:** 1985-03-14 _(verified: appears in the quote below)_ > 10421,IS,,ISO 4522-1:1985,Metallic coatings — Test methods for electrodeposited silver and silver alloy coatings — Part 1: Determination of coating thickness,Revêtements métalliques — Méthodes d'essai des dépôts électrolytiques d'argent et d'alliages d'argent — Partie 1: Détermination de l'épaisseur du dépôt,1985-03-14,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[33857,10420,44332]","['en','fr']",2,"
Specifies methods for the determination of the thickness of electrodeposited coatings for engineering, and decorative and protective purposes. The methods given here are considered to have an adequate accuracy when properly used with test specimens suitable for the particular method. If a referee m Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4522-2:1985 - **Identifier:** ISO 4522-2:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Test methods for electrodeposited silver and silver alloy coatings — Part 2: Adhesion tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 4521 | ISO/CD 4521 | ISO 4521:2008 - **Withdrawn / published date:** 1985-03-21 _(verified: appears in the quote below)_ > 10422,IS,,ISO 4522-2:1985,Metallic coatings — Test methods for electrodeposited silver and silver alloy coatings — Part 2: Adhesion tests,Revêtements métalliques — Méthodes d'essais des dépôts électrolytiques d'argent et d'alliages d'argent — Partie 2: Essais d'adhérence,1985-03-21,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[33857,10420,44332]","['en','fr']",3,"
Specifies the burnishing test, the barrel burnishing test, the peel test, the bend test, the shear test, the shot peening test, and the thermal shock test for assessing the adhesion aof coatings for engineering, and decorative and protective purposes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4522-3:1988 - **Identifier:** ISO 4522-3:1988 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Test methods for electrodeposited silver and silver alloy coatings — Part 3: Determination of the presence of residual salts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4521:2008 - **Withdrawn / published date:** 1988-11-03 _(verified: appears in the quote below)_ > 10423,IS,,ISO 4522-3:1988,Metallic coatings — Test methods for electrodeposited silver and silver alloy coatings — Part 3: Determination of the presence of residual salts,Revêtements métalliques — Méthodes d'essai des dépôts électrolytiques d'argent et d'alliages d'argent — Partie 3: Recherche des sels résiduels,1988-11-03,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[44332],"['en','fr']",2,Specifies a method of boiling specimens in water having a known electrical conductivity. Any increase of the conductivity indicates residual salt or other conducting impurities.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4523:1985 - **Identifier:** ISO 4523:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Electrodeposited gold and gold alloy coatings for engineering purposes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 4523 | ISO/DIS 4523 | ISO 27874:2008 - **Withdrawn / published date:** 1985-02-21 _(verified: appears in the quote below)_ > 10424,IS,,ISO 4523:1985,Metallic coatings — Electrodeposited gold and gold alloy coatings for engineering purposes,Revêtements métalliques — Dépôts électrolytiques d'or et d'alliages d'or pour applications industrielles,1985-02-21,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[10425,33858,44390]","['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4524-1:1985 - **Identifier:** ISO 4524-1:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 1: Determination of coating thickness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 4523 | ISO 27874:2008 - **Withdrawn / published date:** 1985-03-14 _(verified: appears in the quote below)_ > 10426,IS,,ISO 4524-1:1985,Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 1: Determination of coating thickness,Revêtements métalliques — Méthodes d'essai des dépôts électrolytiques d'or et d'alliages d'or — Partie 1: Détermination de l'épaisseur du dépôt,1985-03-14,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[10425,44390]","['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4524-2:1985 - **Identifier:** ISO 4524-2:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 2: Environmental tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4524-2:2000 - **Withdrawn / published date:** 1985-03-14 _(verified: appears in the quote below)_ > 10427,IS,,ISO 4524-2:1985,Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 2: Environmental tests,Revêtements métalliques — Méthodes d'essai des dépôts électrolytiques d'or et d'alliages d'or — Partie 2: Essais climatiques,1985-03-14,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[10428],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4524-3:1985 - **Identifier:** ISO 4524-3:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 3: Electrographic tests for porosity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 4524-3 | ISO 4524-3:2021 - **Withdrawn / published date:** 1985-04-04 _(verified: appears in the quote below)_ > 10429,IS,,ISO 4524-3:1985,Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 3: Electrographic tests for porosity,Revêtements métalliques — Méthodes d'essai des dépôts électrolytiques d'or et d'alliages d'or — Partie 3: Détermination électrographique de la porosité,1985-04-04,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[10430,75380]","['en','fr']",3,"Specifies five electrographic tests for assessing the porosity of these gold and gold alloy coatings for engineering, and decorative and protective purposes. The methods are: cadmium sulfide paper test, nioxime paper test, dye-transfer paper test 1 and 2, and electrographic gelatine film test.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4524-4:1985 - **Identifier:** ISO 4524-4:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 4: Determination of gold content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 4523 | ISO 27874:2008 - **Withdrawn / published date:** 1985-03-21 _(verified: appears in the quote below)_ > 10431,IS,,ISO 4524-4:1985,Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 4: Determination of gold content,Revêtements métalliques — Méthodes d'essai des dépôts électrolytiques d'or et d'alliages d'or — Partie 4: Détermination de la teneur en or,1985-03-21,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[10425,44390]","['en','fr']",2,"Applies to coatings for engineering, and decorative and protective purposes. Specifies general, removal of gold coating from basis metal and undercoats, fire assay, spectrophotometric and atomic absorption spectrometric methods and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4524-5:1985 - **Identifier:** ISO 4524-5:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 5: Adhesion tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 4523 | ISO/WD 4524-5 | ISO 27874:2008 - **Withdrawn / published date:** 1985-01-31 _(verified: appears in the quote below)_ > 10432,IS,,ISO 4524-5:1985,Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 5: Adhesion tests,Revêtements métalliques — Méthodes d'essai des dépôts électrolytiques d'or et d'alliages d'or — Partie 5: Essais d'adhérence,1985-01-31,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[10425,10433,44390]","['en','fr']",1,"Specifies four methods (burnishing test, adhesive tape test, thermal shock test, and bend test) for qualitatively assessing the adhesion of these coatings for engineering, and decorative and protective purposes.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4525:1985 - **Identifier:** ISO 4525:1985 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Electroplated coatings of nickel plus chromium on plastics materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 4525.2 | ISO 4525:2003 - **Withdrawn / published date:** 1985-10-03 _(verified: appears in the quote below)_ > 10436,IS,,ISO 4525:1985,Metallic coatings — Electroplated coatings of nickel plus chromium on plastics materials,Revêtements métalliques — Dépôts électrolytiques de nickel plus chrome sur matières plastiques,1985-10-03,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[10437,36754]","['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4526:1984 - **Identifier:** ISO 4526:1984 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Electroplated coatings of nickel for engineering purposes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4526:2004 - **Withdrawn / published date:** 1984-07-01 _(verified: appears in the quote below)_ > 10438,IS,,ISO 4526:1984,Metallic coatings — Electroplated coatings of nickel for engineering purposes,Revêtements métalliques — Dépôts électrolytiques de nickel pour usages industriels,1984-07-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[37513],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4527:1987 - **Identifier:** ISO 4527:1987 _(verified: appears in the quote below)_ - **Item title:** Autocatalytic nickel-phosphorus coatings — Specification and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4527:2003 | ISO/DIS 4527 - **Withdrawn / published date:** 1987-07-09 _(verified: appears in the quote below)_ > 10439,IS,,ISO 4527:1987,Autocatalytic nickel-phosphorus coatings — Specification and test methods,Dépôts autocatalytiques de nickel-phosphore — Spécifications et méthodes d'essai,1987-07-09,1,['25.220.40'],ISO/TC 107/SC 3,9599,,"[36258,23054]","['en','fr']",24, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4528:2000 - **Identifier:** ISO 4528:2000 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4528:2015 - **Withdrawn / published date:** 2000-03-16 _(verified: appears in the quote below)_ > 32382,IS,,ISO 4528:2000,Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles,Finitions des émaux vitrifiés — Choix des méthodes d'essai applicables aux surfaces émaillées de pièces,2000-03-16,1,['25.220.50'],ISO/TC 107,9599,,[61465],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4528:2015 - **Identifier:** ISO 4528:2015 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4528:2022 - **Withdrawn / published date:** 2015-02-05 _(verified: appears in the quote below)_ > 61465,IS,,ISO 4528:2015,Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles,Finitions en émail vitrifié — Guide pour le choix des méthodes d'essai applicables aux surfaces émaillées de pièces,2015-02-05,2,['25.220.50'],ISO/TC 107,9599,[32382],[82606],"['en','fr']",11,ISO 4528:2015 is a guide to the selection of test methods for evaluating the performance of vitreous and porcelain enamelled finishes in different applications. It references the test methods available for measuring the properties of these finishes and correlates these properties to the requirements of specific enamelled articles.
It is limit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4530:1983 - **Identifier:** ISO 4530:1983 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4530:2022 - **Withdrawn / published date:** 1983-10-01 _(verified: appears in the quote below)_ > 10441,IS,,ISO 4530:1983,Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat,Pièces manufacturées recouvertes d'émaux vitrifiés — Détermination de la résistance à la chaleur,1983-10-01,1,['25.220.50'],ISO/TC 107,9599,,[82860],"['en','fr']",2,"
The method described is applicable to enamelled articles that will, in service, be subjected to high temperature. Supplementary information on test temperature, test of heating, temperature measuring points, rate of temperature increase, duration of maintaining the test temperature, number of single heating and cooling tests and damage criteria of the evaluation the enamel finishes shall be derived from standar Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4531-1:1998 - **Identifier:** ISO 4531-1:1998 _(verified: appears in the quote below)_ - **Item title:** Vitreous and porcelain enamels — Release of lead and cadmium from enamelled ware in contact with food — Part 1: Method of test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4531:2018 - **Withdrawn / published date:** 1998-10-01 _(verified: appears in the quote below)_ > 10442,IS,,ISO 4531-1:1998,Vitreous and porcelain enamels — Release of lead and cadmium from enamelled ware in contact with food — Part 1: Method of test,Émaux vitrifiés — Émission de plomb et de cadmium d'articles émaillés en contact avec les aliments — Partie 1: Méthode d'essai,1998-10-01,1,"['97.040.60','25.220.50','67.250']",ISO/TC 107,9599,,[70990],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 119](https://referencesource.org/iso-standard-supersessions/p/119/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 121](https://referencesource.org/iso-standard-supersessions/p/121/) Last verified: 2026-08-05. Review by: 2027-02-02.