The principle is based on placing a series of thermometric probes consisting of a rigid tube or flexible cable with one or more temperature-sensing devices throughout the mass of stored grain to detect or monitor changes in temperature. In larger stores, an automated temperature control may be used, the various measuring values being printed on paper. This sec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4113:1988 - **Identifier:** ISO 4113:1988 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Calibration fluid for diesel injection equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 4113 | ISO 4113:2010 - **Withdrawn / published date:** 1988-11-10 _(verified: appears in the quote below)_ > 9858,IS,,ISO 4113:1988,Road vehicles — Calibration fluid for diesel injection equipment,Véhicules routiers — Fluide d'essai pour équipements d'injection à gazole,1988-11-10,2,['43.180'],ISO/TC 22,9599,,"[31216,50636]","['en','fr']",2,"
Specifies the requirements for a calibration fluid with which diesel injection equipment may be calibrated and tested in production, in service, and in laboratories. Tabulates characteristics, units of measurement, desired values, and methods of determination. This second edition cancels and replaces the first edition (1978).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4115:1980 - **Identifier:** ISO 4115:1980 _(verified: appears in the quote below)_ - **Item title:** Air-land cargo pallet nets — Specification and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4115:1987 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 9861,IS,,ISO 4115:1980,Air-land cargo pallet nets — Specification and testing,Filets de palettes pour le transport aérien et de surface — Spécification et essais,1980-10-01,1,['55.180.30'],ISO/TC 20/SC 9,9599,,[9862],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4115:1987 - **Identifier:** ISO 4115:1987 _(verified: appears in the quote below)_ - **Item title:** Air cargo equipment — Air/land pallet nets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4115:1997 - **Withdrawn / published date:** 1987-05-14 _(verified: appears in the quote below)_ > 9862,IS,,ISO 4115:1987,Air cargo equipment — Air/land pallet nets,Équipement pour le fret aérien — Filets de palettes pour transport aérien et de surface,1987-05-14,2,['55.180.30'],ISO/TC 20/SC 9,9599,[9861],[22885],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4116:1980 - **Identifier:** ISO 4116:1980 _(verified: appears in the quote below)_ - **Item title:** Ground equipment requirements for compatibility with aircraft unit load devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4116:1986 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 9863,IS,,ISO 4116:1980,Ground equipment requirements for compatibility with aircraft unit load devices,Caractéristiques de l'équipement au sol en vue d'assurer sa compatibilité avec les unités de charge d'aéronefs,1980-10-01,1,"['49.100','49.120']",ISO/TC 20/SC 9,9599,,[9864],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4117:1980 - **Identifier:** ISO 4117:1980 _(verified: appears in the quote below)_ - **Item title:** Air and air-land cargo pallets — Specification and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4117:1993 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 9865,IS,,ISO 4117:1980,Air and air-land cargo pallets — Specification and testing,Palettes pour le transport aérien et de surface — Spécification et essais,1980-10-01,1,['55.180.30'],ISO/TC 20/SC 9,9599,,[9866],"['en','fr']",27, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4118:1980 - **Identifier:** ISO 4118:1980 _(verified: appears in the quote below)_ - **Item title:** Non-certified lower deck containers for air transport — Specification and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4118:1996 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 9867,IS,,ISO 4118:1980,Non-certified lower deck containers for air transport — Specification and testing,Conteneurs non certifiés de soutes inférieures d'aéronefs de grande capacité — Spécification et essais,1980-10-01,1,['55.180.30'],ISO/TC 20/SC 9,9599,,[9868],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4118:1996 - **Identifier:** ISO 4118:1996 _(verified: appears in the quote below)_ - **Item title:** Non-certified lower-deck containers for air transport — Specification and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4118:2005 - **Withdrawn / published date:** 1996-04-18 _(verified: appears in the quote below)_ > 9868,IS,,ISO 4118:1996,Non-certified lower-deck containers for air transport — Specification and testing,Conteneurs non certifiés de pont inférieur d'aéronefs — Spécification et essais,1996-04-18,2,['55.180.30'],ISO/TC 20/SC 9,9599,[9867],[37209],"['en','fr']",16,"Specifies the general design, performance and testing requirements for compartment-restrained lower-deck containers for air transport which do not require airworthiness certification.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4118:1996/Cor 1:1999 - **Identifier:** ISO 4118:1996/Cor 1:1999 _(verified: appears in the quote below)_ - **Item title:** Non-certified lower-deck containers for air transport — Specification and testing — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4118:2005 - **Withdrawn / published date:** 1999-10-21 _(verified: appears in the quote below)_ > 31672,IS,Cor,ISO 4118:1996/Cor 1:1999,Non-certified lower-deck containers for air transport — Specification and testing — Technical Corrigendum 1,Conteneurs non certifiés de pont inférieur d'aéronefs — Spécification et essais — Rectificatif technique 1,1999-10-21,2,['55.180.30'],ISO/TC 20/SC 9,9599,,[37209],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4118:2005 - **Identifier:** ISO 4118:2005 _(verified: appears in the quote below)_ - **Item title:** Air cargo — Non-certified containers for the lower deck of large-capacity aircraft — Specification and testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4118:2016 - **Withdrawn / published date:** 2005-11-01 _(verified: appears in the quote below)_ > 37209,IS,,ISO 4118:2005,Air cargo — Non-certified containers for the lower deck of large-capacity aircraft — Specification and testing,Fret aérien — Conteneurs non certifiés de pont inférieur d'aéronefs gros porteurs — Spécifications et essais,2005-11-01,3,['55.180.30'],ISO/TC 20/SC 9,9599,"[9868,31672]",[62014],"['en','fr']",32,"ISO 4118:2005 specifies the requirements for lower-deck containers in large-capacity aircraft which do not require airworthiness certification when loaded under the conditions of compartment restraint and/or, where applicable according to aircraft type, ISO 8097 (NAS 3610) equivalent base-plate restraint.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4119:1978 - **Identifier:** ISO 4119:1978 _(verified: appears in the quote below)_ - **Item title:** Pulps — Determination of stock concentration (Rapid method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4119:1995 - **Withdrawn / published date:** 1978-11-01 _(verified: appears in the quote below)_ > 9869,IS,,ISO 4119:1978,Pulps — Determination of stock concentration (Rapid method),Pâtes — Détermination de la concentration en pâte (Méthode rapide),1978-11-01,1,['85.040'],ISO/TC 6,9599,,[1493],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4120:1983 - **Identifier:** ISO 4120:1983 _(verified: appears in the quote below)_ - **Item title:** Sensory analysis — Methodology — Triangular test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 4120 | ISO 4120:2004 - **Withdrawn / published date:** 1983-11-01 _(verified: appears in the quote below)_ > 9870,IS,,ISO 4120:1983,Sensory analysis — Methodology — Triangular test,Analyse sensorielle — Méthodologie — Essai triangulaire,1983-11-01,1,['67.240'],ISO/TC 34/SC 12,9599,,"[21314,33495]","['en','fr']",8,"The method is applicable for revealing slight differences between samples. The differences may concern either all attribute of the samples, the principle consists in simultaneous presentation to the assessors of a set of three samples, two of which are identical. Following testing, written response by the assessors, and interpretation of the replies obtained.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4120:2004 - **Identifier:** ISO 4120:2004 _(verified: appears in the quote below)_ - **Item title:** Sensory analysis — Methodology — Triangle test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4120:2021 - **Withdrawn / published date:** 2004-06-23 _(verified: appears in the quote below)_ > 33495,IS,,ISO 4120:2004,Sensory analysis — Methodology — Triangle test,Analyse sensorielle — Méthodologie — Essai triangulaire,2004-06-23,2,['67.240'],ISO/TC 34/SC 12,9599,[9870],[76666],"['en','fr']",15,"ISO 4120:2004 describes a procedure for determining whether a perceptible sensory difference or similarity exists between samples of two products. The method is a forced-choice procedure. The method applies whether a difference can exist in a single sensory attribute or in several attributes.
The method is statistically more efficient than the duo-trio test, but has limited use with products that exhibit strong carryover and/or lingering flavours.
The method is applicable eve Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4121:1987 - **Identifier:** ISO 4121:1987 _(verified: appears in the quote below)_ - **Item title:** Sensory analysis — Methodology — Evaluation of food products by methods using scales _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4121:2003 | ISO/CD 4121 - **Withdrawn / published date:** 1987-12-17 _(verified: appears in the quote below)_ > 9871,IS,,ISO 4121:1987,Sensory analysis — Methodology — Evaluation of food products by methods using scales,Analyse sensorielle — Méthodologie — Évaluation des produits alimentaires par des méthodes utilisant des échelles,1987-12-17,1,['67.240'],ISO/TC 34/SC 12,9599,,"[33817,20874]","['en','fr']",7,"
Three sections are given: 1. guidance and general conditions for two types of test; 2. tests using interval or ratio scales, for the evaluation of food products by the allocation of scores; 3. tests used evaluating specific food products, consisting of classifying these products as a whole or by their particular attributes, using ordinal scales, by means of a score or expression.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4125:1979 - **Identifier:** ISO 4125:1979 _(verified: appears in the quote below)_ - **Item title:** Dry fruits and dried fruits — Definitions and nomenclature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4125:1991 - **Withdrawn / published date:** 1979-12-01 _(verified: appears in the quote below)_ > 9876,IS,,ISO 4125:1979,Dry fruits and dried fruits — Definitions and nomenclature,Fruits secs et fruits déshydratés — Définitions et nomenclature,1979-12-01,1,"['67.080.10','01.040.67']",ISO/TC 34,9599,,[9877],"['en','fr','ru']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-1:1991 - **Identifier:** ISO 4126-1:1991 _(verified: appears in the quote below)_ - **Item title:** Safety valves — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-1:2004 | ISO/DIS 4126-1 - **Withdrawn / published date:** 1991-12-12 _(verified: appears in the quote below)_ > 9879,IS,,ISO 4126-1:1991,Safety valves — Part 1: General requirements,Soupapes de sûreté — Partie 1: Prescriptions générales,1991-12-12,1,['13.240'],ISO/TC 185,9599,[9878],"[35889,25673]","['en','fr']",25,"Specifies requirements for safety valves irrespective of the fluid for which they are designed. Applies to valves having a flow diameter of 9 mm and above, which are for use at set pressures of 1 bar gauge (0,1 MPa) and above.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-1:2004 - **Identifier:** ISO 4126-1:2004 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 1: Safety valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-1:2013 - **Withdrawn / published date:** 2004-02-24 _(verified: appears in the quote below)_ > 35889,IS,,ISO 4126-1:2004,Safety devices for protection against excessive pressure — Part 1: Safety valves,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 1: Soupapes de sûreté,2004-02-24,2,['13.240'],ISO/TC 185,9599,[9879],[50826],"['en','fr']",24,"ISO 4126-1:2004 specifies general requirements for safety valves irrespective of the fluid for which they are designed. It is applicable to safety valves having a flow diameter of 6 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and is not concerned with applications for safety valves.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-1:2004/Cor 1:2007 - **Identifier:** ISO 4126-1:2004/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 1: Safety valves — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-1:2013 - **Withdrawn / published date:** 2007-08-02 _(verified: appears in the quote below)_ > 46467,IS,Cor,ISO 4126-1:2004/Cor 1:2007,Safety devices for protection against excessive pressure — Part 1: Safety valves — Technical Corrigendum 1,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 1: Soupapes de sûreté — Rectificatif technique 1,2007-08-02,2,['13.240'],ISO/TC 185,9599,,[50826],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-10:2010 - **Identifier:** ISO 4126-10:2010 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 4126-10 | ISO 4126-10:2024 - **Withdrawn / published date:** 2010-09-29 _(verified: appears in the quote below)_ > 45959,IS,,ISO 4126-10:2010,Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 10: Dimensionnement des soupapes de sûreté pour les débits diphasiques gaz/liquide,2010-09-29,1,['13.240'],ISO/TC 185,9599,,"[61429,76057]","['en','fr']",45,"ISO 4126-10:2010 specifies the sizing of safety valves for gas/liquid two-phase flow in pressurized systems such as: reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126:1981 - **Identifier:** ISO 4126:1981 _(verified: appears in the quote below)_ - **Item title:** Safety valves — General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-1:1991 - **Withdrawn / published date:** 1981-04-01 _(verified: appears in the quote below)_ > 9878,IS,,ISO 4126:1981,Safety valves — General requirements,Soupapes de sûreté — Prescriptions générales,1981-04-01,2,['13.240'],ISO/TC 153,9599,,[9879],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-2:2003 - **Identifier:** ISO 4126-2:2003 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-2:2018 - **Withdrawn / published date:** 2003-01-21 _(verified: appears in the quote below)_ > 34605,IS,,ISO 4126-2:2003,Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 2: Dispositifs de sûreté à disque de rupture,2003-01-21,1,['13.240'],ISO/TC 185,9599,"[22788,13162]",[65062],"['en','fr']",31,"ISO 4126-2:2003 specifies the requirements for bursting disc safety devices.
ISO 4126-2:2003 includes the requirements for the design, manufacture, inspection, testing, certification, marking, and packaging.
The requirements for the application, selection and installation of bursting disc safety devices are given in ISO 4126-6.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-3:2006 - **Identifier:** ISO 4126-3:2006 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-3:2020 - **Withdrawn / published date:** 2006-03-03 _(verified: appears in the quote below)_ > 34203,IS,,ISO 4126-3:2006,Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 3: Soupapes de sûreté et dispositifs de sûreté à disque de rupture en combinaison,2006-03-03,1,['13.240'],ISO/TC 185,9599,"[22788,13162]",[69646],"['en','fr']",11,"ISO 4126-3:2006 specifies the requirements for a product assembled from the in-series combination of safety valves or CSPRS (controlled safety pressure relief systems) according to ISO 4126-1, ISO 4126-4 and ISO 4126-5, and bursting disc safety devices according to ISO 4126-2 installed within no Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-4:2004 - **Identifier:** ISO 4126-4:2004 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 4: Pilot-operated safety valves _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-4:2013 - **Withdrawn / published date:** 2004-02-27 _(verified: appears in the quote below)_ > 35405,IS,,ISO 4126-4:2004,Safety devices for protection against excessive pressure — Part 4: Pilot-operated safety valves,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 4: Soupapes de sûreté pilotées,2004-02-27,1,['13.240'],ISO/TC 185,9599,"[22788,13162]",[50827],"['en','fr']",26,"
ISO 4126-4:2003 specifies general requirements for pilot operated safety valves, other than those covered in ISO 4126-1, irrespective of the fluid for which they are designed. In all cases, the operation is carried out by the fluid in the system to be protected.
ISO 4126-4:2003 is applicable to pilot operated safety valves having a valve flow diameter of 6 mm and above whi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-4:2004/Cor 1:2007 - **Identifier:** ISO 4126-4:2004/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 4: Pilot-operated safety valves — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-4:2013 - **Withdrawn / published date:** 2007-08-02 _(verified: appears in the quote below)_ > 46466,IS,Cor,ISO 4126-4:2004/Cor 1:2007,Safety devices for protection against excessive pressure — Part 4: Pilot-operated safety valves — Technical Corrigendum 1,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 4: Soupapes de sûreté pilotées — Rectificatif technique 1,2007-08-02,1,['13.240'],ISO/TC 185,9599,,[50827],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-5:2004 - **Identifier:** ISO 4126-5:2004 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-5:2013 - **Withdrawn / published date:** 2004-03-24 _(verified: appears in the quote below)_ > 34204,IS,,ISO 4126-5:2004,Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS),Dispositifs de sécurité pour protection contre les pressions excessives — Partie 5: Dispositifs de sûreté à décharge contrôlés contre les surpressions (DSDCS),2004-03-24,1,['13.240'],ISO/TC 185,9599,"[22788,13162]",[50828],"['en','fr']",27,"
ISO 4126-5:2004 specifies the requirements for controlled safety pressure relief systems, irrespective of the fluid for which they are designed. It is applicable to main valves having a flow diameter of 6 mm and above for use at pressures of 0,1 bar (= 0,01 MPa) gauge and above. No limitation is placed on temper Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-5:2004/Cor 1:2006 - **Identifier:** ISO 4126-5:2004/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-5:2013 - **Withdrawn / published date:** 2006-09-22 _(verified: appears in the quote below)_ > 44813,IS,Cor,ISO 4126-5:2004/Cor 1:2006,Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Technical Corrigendum 1,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 5: Dispositifs de sûreté à décharge contrôlés contre les surpressions (DSDCS) — Rectificatif technique 1,2006-09-22,1,['13.240'],ISO/TC 185,9599,,[50828],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-5:2004/Cor 2:2007 - **Identifier:** ISO 4126-5:2004/Cor 2:2007 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Technical Corrigendum 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-5:2013 - **Withdrawn / published date:** 2007-07-30 _(verified: appears in the quote below)_ > 46465,IS,Cor,ISO 4126-5:2004/Cor 2:2007,Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Technical Corrigendum 2,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 5: Dispositifs de sûreté à décharge contrôlés contre les surpressions (DSDCS) — Rectificatif technique 2,2007-07-30,1,['13.240'],ISO/TC 185,9599,,[50828],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-6:2003 - **Identifier:** ISO 4126-6:2003 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-6:2014 - **Withdrawn / published date:** 2003-12-10 _(verified: appears in the quote below)_ > 34205,IS,,ISO 4126-6:2003,"Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices","Dispositifs de sécurité pour protection contre les pressions excessives — Partie 6: Application, sélection et installation des dispositifs de sûreté à disque de rupture",2003-12-10,1,['13.240'],ISO/TC 185,9599,"[22788,13162]",[54303],"['en','fr']",33,"
ISO 4126-6:2003 gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-7:2004 - **Identifier:** ISO 4126-7:2004 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 7: Common data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-7:2013 - **Withdrawn / published date:** 2004-02-24 _(verified: appears in the quote below)_ > 34206,IS,,ISO 4126-7:2004,Safety devices for protection against excessive pressure — Part 7: Common data,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 7: Données communes,2004-02-24,1,['13.240'],ISO/TC 185,9599,,[50829],"['en','fr']",33,"ISO 4126-7:2004 contains data common to other parts of ISO 4126, thus avoiding unnecessary repetition, and is referenced in those other parts as appropriate.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4126-7:2004/Cor 1:2006 - **Identifier:** ISO 4126-7:2004/Cor 1:2006 _(verified: appears in the quote below)_ - **Item title:** Safety devices for protection against excessive pressure — Part 7: Common data — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4126-7:2013 - **Withdrawn / published date:** 2006-10-23 _(verified: appears in the quote below)_ > 44814,IS,Cor,ISO 4126-7:2004/Cor 1:2006,Safety devices for protection against excessive pressure — Part 7: Common data — Technical Corrigendum 1,Dispositifs de sécurité pour protection contre les pressions excessives — Partie 7: Données communes — Rectificatif technique 1,2006-10-23,1,['13.240'],ISO/TC 185,9599,,[50829],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4129:1978 - **Identifier:** ISO 4129:1978 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Mopeds — Symbols for controls, indicators and tell-tales _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4129:1990 - **Withdrawn / published date:** 1978-04-01 _(verified: appears in the quote below)_ > 9884,IS,,ISO 4129:1978,"Road vehicles — Mopeds — Symbols for controls, indicators and tell-tales","Véhicules routiers — Cyclomoteurs — Symboles pour les commandes, indicateurs et témoins",1978-04-01,1,['43.140'],ISO/TC 22,9599,,[9885],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4129:1990 - **Identifier:** ISO 4129:1990 _(verified: appears in the quote below)_ - **Item title:** Mopeds — Symbols for controls, indicators and tell-tales _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4129:2012 - **Withdrawn / published date:** 1990-09-20 _(verified: appears in the quote below)_ > 9885,IS,,ISO 4129:1990,"Mopeds — Symbols for controls, indicators and tell-tales","Cyclomoteurs — Symboles pour les commandes, indicateurs et témoins",1990-09-20,2,"['43.140','01.080.20']",ISO/TC 22,9599,[9884],[45395],"['en','fr']",4,"Specifies the symbols, i. e. conventional signs, used to identify certain controls, indicators and tell-tales on a moped and to facilitate their usage. Indicates the colours of possible optical tell-tales which warn the driver of the operation or malfunctioning of devices and equipment connected to the corresponding controls.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4134:1978 - **Identifier:** ISO 4134:1978 _(verified: appears in the quote below)_ - **Item title:** Meat and meat products — Determination of L-(+)- glutamic acid content — Reference method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4134:1999 - **Withdrawn / published date:** 1978-12-01 _(verified: appears in the quote below)_ > 9890,IS,,ISO 4134:1978,Meat and meat products — Determination of L-(+)- glutamic acid content — Reference method,Viandes et produits à base de viande — Détermination de la teneur en acide L-(+)-glutamique — Méthode de référence,1978-12-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[24603],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4134:1999 - **Identifier:** ISO 4134:1999 _(verified: appears in the quote below)_ - **Item title:** Meat and meat products — Determination of L-(+)- glutamic acid content — Reference method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 4134 | ISO 4134:2021 - **Withdrawn / published date:** 1999-11-25 _(verified: appears in the quote below)_ > 24603,IS,,ISO 4134:1999,Meat and meat products — Determination of L-(+)- glutamic acid content — Reference method,Viande et produits à base de viande — Détermination de la teneur en acide L-(+)-glutamique — Méthode de référence,1999-11-25,2,['67.120.10'],ISO/TC 34/SC 6,9599,[9890],"[73382,76936]","['en','fr']",11,"This International Standard specifies a reference method for the determination of the L-(+)-glutamic acid content of
meat and meat products, including poultry.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4135:1979 - **Identifier:** ISO 4135:1979 _(verified: appears in the quote below)_ - **Item title:** Anaesthesiology — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4135:1995 - **Withdrawn / published date:** 1979-09-01 _(verified: appears in the quote below)_ > 9891,IS,,ISO 4135:1979,Anaesthesiology — Vocabulary,Anesthésie — Vocabulaire,1979-09-01,1,"['11.040.10','01.040.11']",ISO/TC 121/SC 4,9599,,[9892],"['en','fr']",17, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4135:1979/Amd 1:1986 - **Identifier:** ISO 4135:1979/Amd 1:1986 _(verified: appears in the quote below)_ - **Item title:** Anaesthesiology — Vocabulary — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4135:1995 - **Withdrawn / published date:** 1986-02-06 _(verified: appears in the quote below)_ > 9893,IS,Amd,ISO 4135:1979/Amd 1:1986,Anaesthesiology — Vocabulary — Amendment 1,Anesthésie — Vocabulaire — Amendement 1,1986-02-06,1,"['11.040.10','01.040.11']",ISO/TC 121/SC 4,9599,,[9892],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4135:1995 - **Identifier:** ISO 4135:1995 _(verified: appears in the quote below)_ - **Item title:** Anaesthesiology — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4135:2001 - **Withdrawn / published date:** 1995-07-13 _(verified: appears in the quote below)_ > 9892,IS,,ISO 4135:1995,Anaesthesiology — Vocabulary,Anesthésie — Vocabulaire,1995-07-13,2,"['11.040.10','01.040.11']",ISO/TC 121/SC 4,9599,"[9893,9891]",[27375],"['en','fr']",51,"A vocabulary of terms used in connection with anesthetic and respiratory equipment and supplies, related devices and supply systems. Cancels and replaces the former edition, which has been technically revised.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4135:2001 - **Identifier:** ISO 4135:2001 _(verified: appears in the quote below)_ - **Item title:** Anaesthetic and respiratory equipment — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4135:2022 - **Withdrawn / published date:** 2001-08-02 _(verified: appears in the quote below)_ > 27375,IS,,ISO 4135:2001,Anaesthetic and respiratory equipment — Vocabulary,Matériel d'anesthésie et de réanimation respiratoire — Vocabulaire,2001-08-02,3,"['11.040.10','01.040.11']",ISO/TC 121/SC 4,9599,[9892],[75315],"['en','fr']",64, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4136:1989 - **Identifier:** ISO 4136:1989 _(verified: appears in the quote below)_ - **Item title:** Fusion-welded butt joints in steel — Transverse tensile test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4136:2001 - **Withdrawn / published date:** 1989-07-20 _(verified: appears in the quote below)_ > 9894,IS,,ISO 4136:1989,Fusion-welded butt joints in steel — Transverse tensile test,Joints soudés bout à bout par fusion dans l'acier — Essai de traction transversale,1989-07-20,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[32828],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4136:2001 - **Identifier:** ISO 4136:2001 _(verified: appears in the quote below)_ - **Item title:** Destructive tests on welds in metallic materials — Transverse tensile test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4136:2012 - **Withdrawn / published date:** 2001-03-15 _(verified: appears in the quote below)_ > 32828,IS,,ISO 4136:2001,Destructive tests on welds in metallic materials — Transverse tensile test,Essais destructifs des soudures sur matériaux métalliques — Essai de traction transversale,2001-03-15,2,['25.160.40'],ISO/TC 44/SC 5,9599,[9894],[62317],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4136:2012 - **Identifier:** ISO 4136:2012 _(verified: appears in the quote below)_ - **Item title:** Destructive tests on welds in metallic materials — Transverse tensile test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4136:2022 - **Withdrawn / published date:** 2012-11-05 _(verified: appears in the quote below)_ > 62317,IS,,ISO 4136:2012,Destructive tests on welds in metallic materials — Transverse tensile test,Essais destructifs des soudures sur matériaux métalliques — Essai de traction transversale,2012-11-05,3,['25.160.40'],ISO/TC 44/SC 5,9599,[32828],[81123],"['en','fr','ru']",9,"ISO 4136:2012 specifies the sizes of test specimen and the procedure for carrying out transverse tensile tests in order to determine the tensile strength and the location of fracture of a welded butt joint.
ISO 4136:2012 applies to metallic materials in all forms of product with joints made by any fusion welding process.
Unless otherwise specified for specific points in ISO 4136:2012, the general principles Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4138:1982 - **Identifier:** ISO 4138:1982 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Steady-state circular test procedure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4138:1996 - **Withdrawn / published date:** 1982-08-01 _(verified: appears in the quote below)_ > 9897,IS,,ISO 4138:1982,Road vehicles — Steady-state circular test procedure,Véhicules routiers — Méthode d'essai en régime permanent sur trajectoire circulaire,1982-08-01,1,['43.020'],ISO/TC 22,9599,,[21461],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4138:1996 - **Identifier:** ISO 4138:1996 _(verified: appears in the quote below)_ - **Item title:** Passenger cars — Steady-state circular driving behaviour — Open-loop test procedure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4138:2004 - **Withdrawn / published date:** 1996-12-26 _(verified: appears in the quote below)_ > 21461,IS,,ISO 4138:1996,Passenger cars — Steady-state circular driving behaviour — Open-loop test procedure,Voitures particulières — Tenue de route en régime permanent sur trajectoire circulaire — Méthode d'essai en boucle ouverte,1996-12-26,2,['43.100'],ISO/TC 22,9599,[9897],[30084],['en'],15,
Describes an open-loop test procedure to determine the steady state directional control response of passenger cars.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4138:2004 - **Identifier:** ISO 4138:2004 _(verified: appears in the quote below)_ - **Item title:** Passenger cars — Steady-state circular driving behaviour — Open-loop test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4138:2012 - **Withdrawn / published date:** 2004-09-20 _(verified: appears in the quote below)_ > 30084,IS,,ISO 4138:2004,Passenger cars — Steady-state circular driving behaviour — Open-loop test methods,Voitures particulières — Tenue de route en régime permanent sur trajectoire circulaire — Méthodes d'essai en boucle ouverte,2004-09-20,3,['43.100'],ISO/TC 22,9599,[21461],[54143],['en'],19,ISO 4138:2004 specifies open-loop test methods for determining the steady-state circular driving behaviour of passenger cars as defined in ISO 3833 and light trucks.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4138:2012 - **Identifier:** ISO 4138:2012 _(verified: appears in the quote below)_ - **Item title:** Passenger cars — Steady-state circular driving behaviour — Open-loop test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4138:2021 - **Withdrawn / published date:** 2012-06-01 _(verified: appears in the quote below)_ > 54143,IS,,ISO 4138:2012,Passenger cars — Steady-state circular driving behaviour — Open-loop test methods,Voitures particulières — Tenue de route en régime permanent sur trajectoire circulaire — Méthodes d'essai en boucle ouverte,2012-06-01,4,['43.100'],ISO/TC 22/SC 33,9599,[30084],[81710],['en'],19,"ISO 4138:2012 specifies open-loop test methods for determining the steady-state circular driving behaviour of passenger cars as defined in ISO 3833 and of light trucks, such behaviour being one of the factors comprising vehicle dynamics and road-holding properties. The open-loop manoeuvres included in these methods are not representative of real driving conditions, but are nevertheless useful Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141-1:1998 - **Identifier:** ISO 4141-1:1998 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multi-core connecting cables — Part 1: Test methods and requirements for basic performance sheathed cables _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-1:2005 - **Withdrawn / published date:** 1998-01-29 _(verified: appears in the quote below)_ > 25756,IS,,ISO 4141-1:1998,Road vehicles — Multi-core connecting cables — Part 1: Test methods and requirements for basic performance sheathed cables,Véhicules routiers — Câbles de raccordement multiconducteurs — Partie 1: Méthodes d'essai et exigences pour les câbles gainés à performances de base,1998-01-29,1,['43.040.10'],ISO/TC 22,9599,[9901],[36606],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141-1:2005 - **Identifier:** ISO 4141-1:2005 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multi-core connecting cables — Part 1: Test methods and requirements for basic performance sheathed cables _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-1:2019 - **Withdrawn / published date:** 2005-09-19 _(verified: appears in the quote below)_ > 36606,IS,,ISO 4141-1:2005,Road vehicles — Multi-core connecting cables — Part 1: Test methods and requirements for basic performance sheathed cables,Véhicules routiers — Câbles de raccordement multiconducteurs — Partie 1: Méthodes d'essai et exigences pour les câbles gainés à performance de base,2005-09-19,2,['43.040.10'],ISO/TC 22/SC 32,9599,[25756],[69565],['en'],12,"
ISO 4141:2005 specifies the test methods and requirements of basic performance multi-core sheathed cables for the connection of towing and towed vehicles, suitable for a temperature range of -40 °C to +85 °C.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141:1978 - **Identifier:** ISO 4141:1978 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Seven-core connecting cable _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141:1988 - **Withdrawn / published date:** 1978-12-01 _(verified: appears in the quote below)_ > 9900,IS,,ISO 4141:1978,Road vehicles — Seven-core connecting cable,Véhicules routiers — Câble de jonction à sept conducteurs,1978-12-01,1,['43.040.10'],ISO/TC 22,9599,,[9901],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141:1988 - **Identifier:** ISO 4141:1988 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Seven-core connecting cables _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-3:1998 | ISO 4141-2:1998 | ISO 4141-1:1998 - **Withdrawn / published date:** 1988-01-21 _(verified: appears in the quote below)_ > 9901,IS,,ISO 4141:1988,Road vehicles — Seven-core connecting cables,Véhicules routiers — Câbles de jonction à sept conducteurs,1988-01-21,2,['43.040.10'],ISO/TC 22,9599,[9900],"[25754,25755,25756]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141-2:1998 - **Identifier:** ISO 4141-2:1998 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multi-core connecting cables — Part 2: Test methods and requirements for high performance sheathed cables _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-2:2006 - **Withdrawn / published date:** 1998-01-29 _(verified: appears in the quote below)_ > 25755,IS,,ISO 4141-2:1998,Road vehicles — Multi-core connecting cables — Part 2: Test methods and requirements for high performance sheathed cables,Véhicules routiers — Câbles de raccordement multiconducteurs — Partie 2: Méthodes d'essai et exigences pour les câbles gainés à hautes performances,1998-01-29,1,['43.040.10'],ISO/TC 22,9599,[9901],[39514],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141-2:2006 - **Identifier:** ISO 4141-2:2006 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multi-core connecting cables — Part 2: Test methods and requirements for high performance sheathed cables _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-2:2019 - **Withdrawn / published date:** 2006-07-05 _(verified: appears in the quote below)_ > 39514,IS,,ISO 4141-2:2006,Road vehicles — Multi-core connecting cables — Part 2: Test methods and requirements for high performance sheathed cables,Véhicules routiers — Câbles de raccordement multiconducteurs — Partie 2: Méthodes d'essai et exigences pour les câbles gainés à hautes performances,2006-07-05,2,['43.040.10'],ISO/TC 22/SC 32,9599,[25755],[69567],"['en','fr']",5,"ISO 4141-2:2006 specifies the test methods and requirements for high performance sheathed multi-core cables for the connection of towing and towed vehicles, suitable for a temperature range of - 40 °C to + 85 °C.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141-3:1998 - **Identifier:** ISO 4141-3:1998 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-3:2006 - **Withdrawn / published date:** 1998-01-29 _(verified: appears in the quote below)_ > 25754,IS,,ISO 4141-3:1998,"Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables","Véhicules routiers — Câbles de raccordement multiconducteurs — Partie 3: Construction, dimensions et marquage des câbles basse tension gainés non blindés",1998-01-29,1,['43.040.10'],ISO/TC 22,9599,[9901],[39515],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141-3:1998/Cor 1:1999 - **Identifier:** ISO 4141-3:1998/Cor 1:1999 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-3:2006 - **Withdrawn / published date:** 1999-03-11 _(verified: appears in the quote below)_ > 30770,IS,Cor,ISO 4141-3:1998/Cor 1:1999,"Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables — Technical Corrigendum 1","Véhicules routiers — Câbles de raccordement multiconducteurs — Partie 3: Construction, dimensions et marquage des câbles basse tension gainés non blindés — Rectificatif technique 1",1999-03-11,1,['43.040.10'],ISO/TC 22,9599,,[39515],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141-3:2006 - **Identifier:** ISO 4141-3:2006 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-3:2019 - **Withdrawn / published date:** 2006-07-11 _(verified: appears in the quote below)_ > 39515,IS,,ISO 4141-3:2006,"Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables","Véhicules routiers — Câbles de raccordement multiconducteurs — Partie 3: Construction, dimensions et marquage des câbles basse tension gainés non blindés",2006-07-11,2,['43.040.10'],ISO/TC 22/SC 32,9599,"[25754,30770]",[70637],['en'],6,"This part of ISO 4141 specifies the construction, dimensions and marking of unscreened sheathed low-voltage multi-core cables for the connection of towing and towed vehicles, suitable for the temperature range -40 °C to +85 °C.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4141-4:2001 - **Identifier:** ISO 4141-4:2001 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Multi-core connecting cables — Part 4: Articulation test method and requirements for coiled cable assemblies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4141-4:2009 - **Withdrawn / published date:** 2001-12-20 _(verified: appears in the quote below)_ > 29887,IS,,ISO 4141-4:2001,Road vehicles — Multi-core connecting cables — Part 4: Articulation test method and requirements for coiled cable assemblies,Véhicules routiers — Câbles de raccordement multiconducteurs — Partie 4: Méthode d'essai d'articulation et exigences pour les câbles spiralés assemblés,2001-12-20,1,['43.040.10'],ISO/TC 22,9599,,[43353],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4142:1997 - **Identifier:** ISO 4142:1997 _(verified: appears in the quote below)_ - **Item title:** Laboratory glassware — Test tubes and culture tubes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4142:2002 - **Withdrawn / published date:** 1997-01-30 _(verified: appears in the quote below)_ > 9902,IS,,ISO 4142:1997,Laboratory glassware — Test tubes and culture tubes,Verrerie de laboratoire — Tubes à essais et tubes à culture,1997-01-30,1,['71.040.20'],ISO/TC 48,9599,,[34397],"['en','fr']",4,Gives dimensions and requirements for reusable and disposable test tubes and culture tubes suitable for general laboratory purposes.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4144:1979 - **Identifier:** ISO 4144:1979 _(verified: appears in the quote below)_ - **Item title:** Stainless steel fittings threaded to with ISO 7-1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4144:2003 - **Withdrawn / published date:** 1979-09-01 _(verified: appears in the quote below)_ > 9904,IS,,ISO 4144:1979,Stainless steel fittings threaded to with ISO 7-1,"Raccords en acier inoxydable, filetés suivant à l'ISO 7-1",1979-09-01,1,['23.040.40'],ISO/TC 5/SC 5,9599,,[30111],"['en','fr']",10,"Specifies requirements for fittings for threaded connections, used mainly for industrial purposes. Table 1 contains diagrams ot types of fittings and their symbols. Tabulates the fitting dimensions (tables 2 to 10) with nominal sizes from DN 6 up to and including DN 80 (thread designation 1/8 to 3).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4145:1979 - **Identifier:** ISO 4145:1979 _(verified: appears in the quote below)_ - **Item title:** Non-alloy steel fittings threaded to ISO 7/1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4145:1986 - **Withdrawn / published date:** 1979-09-01 _(verified: appears in the quote below)_ > 9905,IS,,ISO 4145:1979,Non-alloy steel fittings threaded to ISO 7/1,"Raccords en acier non allié, filetés suivant ISO 7/1",1979-09-01,1,['23.040.40'],ISO/TC 5,9599,,[9906],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4146:1980 - **Identifier:** ISO 4146:1980 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Inland vessels — Manholes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 5894:1978 - **Withdrawn / published date:** 1980-05-01 _(verified: appears in the quote below)_ > 9907,IS,,ISO 4146:1980,Shipbuilding — Inland vessels — Manholes,Construction navale — Bateaux de navigation intérieure — Trous d'homme,1980-05-01,1,['47.060'],ISO/TC 8/SC 7,9599,,[12093],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4147:1983 - **Identifier:** ISO 4147:1983 _(verified: appears in the quote below)_ - **Item title:** Metric fasteners for aerospace construction — Hexagon slotted (castellated) nuts — Strength classification 1 100 MPa — Maximum operating temperature 235 degrees C _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4147:1997 - **Withdrawn / published date:** 1983-09-01 _(verified: appears in the quote below)_ > 9908,IS,,ISO 4147:1983,Metric fasteners for aerospace construction — Hexagon slotted (castellated) nuts — Strength classification 1 100 MPa — Maximum operating temperature 235 degrees C,"Éléments de fixation métriques pour les constructions aérospatiales — Écrous hexagonaux, à créneaux — Classe de résistance 1 100 MPa — Température maximale d'utilisation 235 degrés C",1983-09-01,2,['49.030.30'],ISO/TC 20/SC 4,9599,,[9909],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4148:1978 - **Identifier:** ISO 4148:1978 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Special warning lights — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4148:1988 - **Withdrawn / published date:** 1978-11-01 _(verified: appears in the quote below)_ > 9910,IS,,ISO 4148:1978,Road vehicles — Special warning lights — Dimensions,Véhicules routiers — Feux spéciaux d'alarme — Dimensions,1978-11-01,1,['43.040.20'],ISO/TC 22,9599,,[9911],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4148:1988 - **Identifier:** ISO 4148:1988 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Special warning lamps — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4148:1998 - **Withdrawn / published date:** 1988-10-27 _(verified: appears in the quote below)_ > 9911,IS,,ISO 4148:1988,Road vehicles — Special warning lamps — Dimensions,Véhicules routiers — Feux spéciaux d'avertissement — Dimensions,1988-10-27,2,['43.040.20'],ISO/TC 22,9599,[9910],[23864],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4148:1998 - **Identifier:** ISO 4148:1998 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Special warning lamps — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4148:2004 - **Withdrawn / published date:** 1998-04-02 _(verified: appears in the quote below)_ > 23864,IS,,ISO 4148:1998,Road vehicles — Special warning lamps — Dimensions,Véhicules routiers — Feux spéciaux d'avertissement — Dimensions,1998-04-02,3,['43.040.20'],ISO/TC 22,9599,[9911],[40429],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4149:1980 - **Identifier:** ISO 4149:1980 _(verified: appears in the quote below)_ - **Item title:** Green coffee — Olfactory and visual examination and determination of foreign matter and defects _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4149:2005 | ISO/WD 4149 - **Withdrawn / published date:** 1980-02-01 _(verified: appears in the quote below)_ > 9912,IS,,ISO 4149:1980,Green coffee — Olfactory and visual examination and determination of foreign matter and defects,"Café vert — Examens olfactif et visuel, et détermination des matières étrangères et des défauts",1980-02-01,1,['67.140.20'],ISO/TC 34/SC 15,9599,,"[35894,26855]","['en','fr']",2,"Specification of methods for assessing conformity with a specification or a cotract. The methods specify samlping, the procedure and the evaluation of the examination. The principle of determination of foreign matter and defects consists in separating of foreign matter and defective beans into categories, and weighing and counting.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4149:2005 - **Identifier:** ISO 4149:2005 _(verified: appears in the quote below)_ - **Item title:** Green coffee — Olfactory and visual examination and determination of foreign matter and defects _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4149:2025 - **Withdrawn / published date:** 2005-03-16 _(verified: appears in the quote below)_ > 35894,IS,,ISO 4149:2005,Green coffee — Olfactory and visual examination and determination of foreign matter and defects,"Café vert — Examens olfactif et visuel, et détermination des matières étrangères et des défauts",2005-03-16,2,['67.140.20'],ISO/TC 34/SC 15,9599,[9912],[87699],"['en','fr']",5,"ISO 4149:2005 specifies methods for the olfactory and visual examination and for the determination of foreign matter and defects in green coffee from all origins, in order to assess conformity with a specification or a contract. These methods can also be used for determining one or more of the characteristics of green coffee with an impact on coffee quality for technical, commercial, administrati Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4150:1980 - **Identifier:** ISO 4150:1980 _(verified: appears in the quote below)_ - **Item title:** Green coffee — Size analysis — Manual sieving _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4150:1991 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 9913,IS,,ISO 4150:1980,Green coffee — Size analysis — Manual sieving,Café vert — Analyse granulométrique — Tamisage manuel,1980-08-01,1,['67.140.20'],ISO/TC 34/SC 15,9599,,[9914],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4150:1991 - **Identifier:** ISO 4150:1991 _(verified: appears in the quote below)_ - **Item title:** Green coffee — Size analysis — Manual sieving _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4150:2011 | ISO/CD 4150 | ISO/NP 4150 - **Withdrawn / published date:** 1991-06-27 _(verified: appears in the quote below)_ > 9914,IS,,ISO 4150:1991,Green coffee — Size analysis — Manual sieving,Café vert — Analyse granulométrique — Tamisage manuel,1991-06-27,2,['67.140.20'],ISO/TC 34/SC 15,9599,[9913],"[44602,28541,39822]","['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4151:1978 - **Identifier:** ISO 4151:1978 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Mopeds — Type, location and functions of controls _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4151:1987 - **Withdrawn / published date:** 1978-11-01 _(verified: appears in the quote below)_ > 9915,IS,,ISO 4151:1978,"Road vehicles — Mopeds — Type, location and functions of controls","Véhicules routiers — Cyclomoteurs — Type, positionnement des commandes et leurs fonctions",1978-11-01,1,['43.140'],ISO/TC 22,9599,,[9916],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4156-1:2005 - **Identifier:** ISO 4156-1:2005 _(verified: appears in the quote below)_ - **Item title:** Straight cylindrical involute splines — Metric module, side fit — Part 1: Generalities _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4156-1:2021 - **Withdrawn / published date:** 2005-09-19 _(verified: appears in the quote below)_ > 36497,IS,,ISO 4156-1:2005,"Straight cylindrical involute splines — Metric module, side fit — Part 1: Generalities","Cannelures cylindriques droites à flancs en développante — Module métrique, à centrage sur flancs — Partie 1: Généralités",2005-09-19,1,['21.120.30'],ISO/TC 14,9599,"[9921,9922]",[77819],"['en','fr']",59,
ISO 4156-1:2005 provides the data and indications necessary for the design and manufacture of straight (non-helical) side-fitting cylindrical involute splines.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4156:1981 - **Identifier:** ISO 4156:1981 _(verified: appears in the quote below)_ - **Item title:** Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4156-1:2005 | ISO 4156-2:2005 | ISO 4156-3:2005 - **Withdrawn / published date:** 1981-05-01 _(verified: appears in the quote below)_ > 9921,IS,,ISO 4156:1981,"Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection","Cannelures cylindriques droites à flancs en développante — Module métrique, à centrage sur flancs — Généralités, dimensions et vérification",1981-05-01,1,['21.120.30'],ISO/TC 14,9599,,"[36497,36498,36499]","['en','fr']",138,"Provides data and guidance for the design, manufacture and inspection of the involute splines. Limiting dimensions, tolerances and manufacturing errors are defined and tabulated. Linear and angular dimensions are expressed in mm and degrees, respectively.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4156:1981/Amd 1:1992 - **Identifier:** ISO 4156:1981/Amd 1:1992 _(verified: appears in the quote below)_ - **Item title:** Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection — Amendment 1: Section three: Inspection _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4156-1:2005 | ISO 4156-2:2005 | ISO 4156-3:2005 - **Withdrawn / published date:** 1992-11-19 _(verified: appears in the quote below)_ > 9922,IS,Amd,ISO 4156:1981/Amd 1:1992,"Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection — Amendment 1: Section three: Inspection","Cannelures cylindriques droites à flancs en développante — Module métrique, à centrage sur flancs — Généralités, dimensions et vérification — Amendement 1: Section trois: Vérification",1992-11-19,1,['21.120.30'],ISO/TC 14,9599,,"[36497,36498,36499]","['en','fr']",142,Provides data (in 111 tables) and indications necessary for inspection as well as three methods of inspection by limit gauges.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4156-2:2005 - **Identifier:** ISO 4156-2:2005 _(verified: appears in the quote below)_ - **Item title:** Straight cylindrical involute splines — Metric module, side fit — Part 2: Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4156-2:2021 - **Withdrawn / published date:** 2005-09-19 _(verified: appears in the quote below)_ > 36498,IS,,ISO 4156-2:2005,"Straight cylindrical involute splines — Metric module, side fit — Part 2: Dimensions","Cannelures cylindriques droites à flancs en développante — Module métrique, à centrage sur flancs — Partie 2: Dimensions",2005-09-19,1,['21.120.30'],ISO/TC 14,9599,"[9921,9922]",[77821],"['en','fr']",188,"ISO 4156-2:2005 specifies geometry and inspection dimensions for the design and manufacture of straight (non-helical) side-fitting cylindrical involute splines.
The specified diameters for external splines in the geometry tables and the values in the inspection dimension tables are only valid for fundamental deviation h.
For fundamental deviations other than h, di Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4156-2:2005/Cor 1:2011 - **Identifier:** ISO 4156-2:2005/Cor 1:2011 _(verified: appears in the quote below)_ - **Item title:** Straight cylindrical involute splines — Metric module, side fit — Part 2: Dimensions — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4156-2:2021 - **Withdrawn / published date:** 2011-12-09 _(verified: appears in the quote below)_ > 58000,IS,Cor,ISO 4156-2:2005/Cor 1:2011,"Straight cylindrical involute splines — Metric module, side fit — Part 2: Dimensions — Technical Corrigendum 1","Cannelures cylindriques droites à flancs en développante — Module métrique, à centrage sur flancs — Partie 2: Dimensions — Rectificatif technique 1",2011-12-09,1,['21.120.30'],ISO/TC 14,9599,,[77821],['fr'],, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4156-3:2005 - **Identifier:** ISO 4156-3:2005 _(verified: appears in the quote below)_ - **Item title:** Straight cylindrical involute splines — Metric module, side fit — Part 3: Inspection _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4156-3:2021 - **Withdrawn / published date:** 2005-09-21 _(verified: appears in the quote below)_ > 36499,IS,,ISO 4156-3:2005,"Straight cylindrical involute splines — Metric module, side fit — Part 3: Inspection","Cannelures cylindriques droites à flancs en développante — Module métrique, à centrage sur flancs — Partie 3: Vérification",2005-09-21,1,['21.120.30'],ISO/TC 14,9599,"[9921,9922]",[77822],"['en','fr']",44,
ISO 4156-3:2005 provides data and guidance for the inspection of straight (non-helical) side fitting cylindrical involute splines.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4157-1:1980 - **Identifier:** ISO 4157-1:1980 _(verified: appears in the quote below)_ - **Item title:** Building drawings — Part 1: Designation of buildings and parts of buildings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4157-1:1998 - **Withdrawn / published date:** 1980-03-01 _(verified: appears in the quote below)_ > 9923,IS,,ISO 4157-1:1980,Building drawings — Part 1: Designation of buildings and parts of buildings,Dessins de bâtiment — Partie 1: Désignation des bâtiments et parties de bâtiments,1980-03-01,1,['01.100.30'],ISO/TC 10/SC 8,9599,,[26189],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4157-2:1982 - **Identifier:** ISO 4157-2:1982 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Construction drawings — Designation of buildings and parts of buildings — Part 2: Designation of rooms and other areas _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4157-2:1998 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 9924,IS,,ISO 4157-2:1982,Technical drawings — Construction drawings — Designation of buildings and parts of buildings — Part 2: Designation of rooms and other areas,Dessins techniques — Dessins de construction — Désignation des bâtiments et parties de bâtiments — Partie 2: Désignation de pièces et d'autres extensions,1982-12-01,1,['01.100.30'],ISO/TC 10/SC 8,9599,,[26190],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4161:1983 - **Identifier:** ISO 4161:1983 _(verified: appears in the quote below)_ - **Item title:** Hexagon nuts with flange — Product grade A _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4161:1999 - **Withdrawn / published date:** 1983-10-01 _(verified: appears in the quote below)_ > 9928,IS,,ISO 4161:1983,Hexagon nuts with flange — Product grade A,Écrous hexagonaux à embase cylindro-tronconique — Grade A,1983-10-01,1,['21.060.20'],ISO/TC 2,9599,,[9929],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4161:1999 - **Identifier:** ISO 4161:1999 _(verified: appears in the quote below)_ - **Item title:** Hexagon nuts with flange — Coarse thread _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4161:2012 - **Withdrawn / published date:** 1999-03-18 _(verified: appears in the quote below)_ > 9929,IS,,ISO 4161:1999,Hexagon nuts with flange — Coarse thread,Écrous hexagonaux à embase cylindro-tronconique — Filetage à pas gros,1999-03-18,2,['21.060.20'],ISO/TC 2/SC 12,9599,[9928],[61523],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4162:1990 - **Identifier:** ISO 4162:1990 _(verified: appears in the quote below)_ - **Item title:** Hexagon flange bolts — Small series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4162:2012 | ISO/FDIS 4162 - **Withdrawn / published date:** 1990-05-17 _(verified: appears in the quote below)_ > 9930,IS,,ISO 4162:1990,Hexagon flange bolts — Small series,Vis à tête hexagonale à embase cylindro-tronconique — Série étroite,1990-05-17,1,['21.060.10'],ISO/TC 2/SC 11,9599,,"[56451,26740]","['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4164:1978 - **Identifier:** ISO 4164:1978 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Mopeds — Engine test code — Net power _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4164:2012 - **Withdrawn / published date:** 1978-12-01 _(verified: appears in the quote below)_ > 9932,IS,,ISO 4164:1978,Road vehicles — Mopeds — Engine test code — Net power,Véhicules routiers — Cyclomoteurs — Code d'essai des moteurs — Puissance nette,1978-12-01,1,['43.140'],ISO/TC 22,9599,,[55398],"['en','fr']",11,"Specifies a method for testing engines designed for mopeds, applicable to the evaluation of their performances with a view, in particular, to presenting curves of power and specific fuel consumption at full load as a function of engine rotational frequency. Applies only to the net power study.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4165:1979 - **Identifier:** ISO 4165:1979 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Electrical connections — Double-pole connector _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4165:2001 - **Withdrawn / published date:** 1979-07-01 _(verified: appears in the quote below)_ > 9933,IS,,ISO 4165:1979,Road vehicles — Electrical connections — Double-pole connector,Véhicules routiers — Connexions électriques — Prise bipolaire,1979-07-01,1,['43.040.10'],ISO/TC 22,9599,,[33321],"['en','fr']",1,Specifies characteristics of the double-pole connector for special warning lights and for hand lamps. Two figures illustrate shapes and details of the plug and the socket; details not specified are left to the manufacturer's choice. Dimensions and tolerances are given in millimetres.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4167:1979 - **Identifier:** ISO 4167:1979 _(verified: appears in the quote below)_ - **Item title:** Ropes and cordage — Polyolefin agricultural twines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4167:2006 - **Withdrawn / published date:** 1979-10-01 _(verified: appears in the quote below)_ > 9935,IS,,ISO 4167:1979,Ropes and cordage — Polyolefin agricultural twines,Ficelles agricoles en polyoléfine,1979-10-01,1,['59.080.50'],ISO/TC 38,9599,,[33975],"['en','fr']",5,"Establishes the principal properties of the named product, describes methods of test permitting their verification and specifies the form of commercial presentation for the twines. An example of designation is given.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4168:1979 - **Identifier:** ISO 4168:1979 _(verified: appears in the quote below)_ - **Item title:** Time measurement instruments — Conditions for carrying out checks on radioluminescent deposits _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4168:2002 - **Withdrawn / published date:** 1979-04-01 _(verified: appears in the quote below)_ > 9936,IS,,ISO 4168:1979,Time measurement instruments — Conditions for carrying out checks on radioluminescent deposits,Instruments horaires — Conditions d'exécution des contrôles des dépôts radioluminescents,1979-04-01,1,['39.040.01'],ISO/TC 114,9599,,[30259],"['en','fr']",2,"Supplements ISO 3157, in particular clause 5 of that document 'Specifications and test methods for radioluminescent deposits'. The checks are concerned with the colours, the specific luminous intensity and resistance to ageing as well as adhesion and insolubility. The certificate of conformity is characterized.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4169:1979 - **Identifier:** ISO 4169:1979 _(verified: appears in the quote below)_ - **Item title:** Office machines — Keyboards — Key numbering system and layout charts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 9995-6:1994 | ISO/IEC 9995-2:1994 | ISO/IEC 9995-3:1994 | ISO/IEC 9995-7:1994 | ISO/IEC 9995-4:1994 | ISO/IEC 9995-1:1994 | ISO/IEC 9995-5:1994 - **Withdrawn / published date:** 1979-12-01 _(verified: appears in the quote below)_ > 9937,IS,,ISO 4169:1979,Office machines — Keyboards — Key numbering system and layout charts,Machines de bureau — Claviers — Système de numérotation des touches et grilles de repérage,1979-12-01,1,"['35.180','35.260']",ISO/IEC JTC 1,9599,,"[17914,17910,17911,17915,17912,17909,17913]","['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 417:1977 - **Identifier:** ISO 417:1977 _(verified: appears in the quote below)_ - **Item title:** Photography — Determination of thiosulphate and other residual chemicals in processed photographic films, plates and papers — Methylene blue photometric method and silver sulphide densitometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 417:1993 - **Withdrawn / published date:** 1977-10-01 _(verified: appears in the quote below)_ > 4424,IS,,ISO 417:1977,"Photography — Determination of thiosulphate and other residual chemicals in processed photographic films, plates and papers — Methylene blue photometric method and silver sulphide densitometric method","Photographie — Détermination du thiosulfate et d'autres produits chimiques résiduels dans les films, plaques et papiers photographiques développés — Méthode photométrique au bleu de méthylène et méthode densitométrique au sulfure d'argent",1977-10-01,1,"['37.040.20','37.040.30']",ISO/TC 42,9599,,[4425],['en'],5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 417:1993 - **Identifier:** ISO 417:1993 _(verified: appears in the quote below)_ - **Item title:** Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 18917:1999 - **Withdrawn / published date:** 1993-04-29 _(verified: appears in the quote below)_ > 4425,IS,,ISO 417:1993,"Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide","Photographie — Détermination du thiosulfate résiduel et d'autres produits chimiques dans les produits photographiques traités — Méthodes à l'iode-amylose, au bleu de méthylène et au sulfure d'argent",1993-04-29,2,"['37.040.20','37.040.30']",ISO/TC 42,9599,[4424],[28235],['en'],18, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4170:1980 - **Identifier:** ISO 4170:1980 _(verified: appears in the quote below)_ - **Item title:** Interline air cargo pallet nets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4170:1987 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 9938,IS,,ISO 4170:1980,Interline air cargo pallet nets,Filets de palettes pour le transport aérien,1980-10-01,1,['55.180.30'],ISO/TC 20/SC 9,9599,,[9939],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4170:1987 - **Identifier:** ISO 4170:1987 _(verified: appears in the quote below)_ - **Item title:** Air cargo equipment — Interline pallet nets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4170:1995 - **Withdrawn / published date:** 1987-05-07 _(verified: appears in the quote below)_ > 9939,IS,,ISO 4170:1987,Air cargo equipment — Interline pallet nets,Équipement pour le fret aérien — Filets de palettes pour transport aérien,1987-05-07,2,['55.180.30'],ISO/TC 20/SC 9,9599,[9938],[20263],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4171:1980 - **Identifier:** ISO 4171:1980 _(verified: appears in the quote below)_ - **Item title:** Interline air cargo pallets _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4171:1993 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 9940,IS,,ISO 4171:1980,Interline air cargo pallets,Palettes pour le transport aérien,1980-10-01,1,['55.180.30'],ISO/TC 20/SC 9,9599,,[9941],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4172:1981 - **Identifier:** ISO 4172:1981 _(verified: appears in the quote below)_ - **Item title:** Building and civil engineering drawings — Drawings for the assembly of prefabricated structures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4172:1991 - **Withdrawn / published date:** 1981-04-01 _(verified: appears in the quote below)_ > 9942,IS,,ISO 4172:1981,Building and civil engineering drawings — Drawings for the assembly of prefabricated structures,Dessins de bâtiment et de génie civil — Dessins d'assemblage des structures préfabriquées,1981-04-01,1,['01.100.30'],ISO/TC 10,9599,,[9943],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4172:1991 - **Identifier:** ISO 4172:1991 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4172:2024 - **Withdrawn / published date:** 1991-03-07 _(verified: appears in the quote below)_ > 9943,IS,,ISO 4172:1991,Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures,Dessins techniques — Dessins de construction — Dessins d'assemblage des structures préfabriquées,1991-03-07,2,['01.100.30'],ISO/TC 10/SC 8,9599,[9942],[83162],"['en','fr']",11,"This second edition cancels and replaces the first edition (ISO 4172 :1981), clause 2 and subclause 4.3 of which have been technically revised. Specifies general rules for the preparation of working drawings intended for the field assembly of prefabricated structures for building and civil engineering works. Gives normative references, definitions, documentation, designation of prefabricated str Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4174:1980 - **Identifier:** ISO 4174:1980 _(verified: appears in the quote below)_ - **Item title:** Cereals and pulses — Measurement of unit pressure losses due to single-dimension air flow through a batch of grain _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4174:1998 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 9945,IS,,ISO 4174:1980,Cereals and pulses — Measurement of unit pressure losses due to single-dimension air flow through a batch of grain,Céréales et légumineuses — Mesurage des pertes de charge unitaires dues à l'écoulement unidimensionnel de l'air à travers un lot de grains,1980-08-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[24555],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4179:1980 - **Identifier:** ISO 4179:1980 _(verified: appears in the quote below)_ - **Item title:** Ductile iron pipes for pressure pipelines — Centrifugal cement mortar lining — General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4179:1985 - **Withdrawn / published date:** 1980-02-01 _(verified: appears in the quote below)_ > 9949,IS,,ISO 4179:1980,Ductile iron pipes for pressure pipelines — Centrifugal cement mortar lining — General requirements,Tuyaux en fonte ductile pour canalisations avec pression — Revêtement interne au mortier de ciment centrifugé — Prescriptions générales,1980-02-01,1,"['23.040.10','77.140.75']",ISO/TC 5,9599,,[9950],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4179:1985 - **Identifier:** ISO 4179:1985 _(verified: appears in the quote below)_ - **Item title:** Ductile iron pipes for pressure and non-pressure pipelines — Centrifugal cement mortar lining — General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4179:2005 - **Withdrawn / published date:** 1985-10-17 _(verified: appears in the quote below)_ > 9950,IS,,ISO 4179:1985,Ductile iron pipes for pressure and non-pressure pipelines — Centrifugal cement mortar lining — General requirements,Tuyaux en fonte ductile pour canalisations avec et sans pression — Revêtement interne au mortier de ciment centrifugé — Prescriptions générales,1985-10-17,2,"['23.040.10','77.140.75']",ISO/TC 5/SC 2,9599,[9949],[35244],"['en','fr']",4,"
This second edition cancels and replaces the first edition (1980). Specifies the nature, the method of application, the surface condition and the minimum thickness of internal linings for pipes as defined in ISO 2531 and ISO 7186. Tabulates nominal sizes from DN 40 up to and including DN 2600.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4179:2005 - **Identifier:** ISO 4179:2005 _(verified: appears in the quote below)_ - **Item title:** Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4179:2024 - **Withdrawn / published date:** 2005-02-04 _(verified: appears in the quote below)_ > 35244,IS,,ISO 4179:2005,Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining,Tuyaux et raccords en fonte ductile pour canalisations avec et sans pression — Revêtement interne de mortier de ciment,2005-02-04,3,"['23.040.10','77.140.75']",ISO/TC 5/SC 2,9599,[9950],[82117],"['en','fr']",6,"ISO 4179:2005 specifies the nature, the method of application, the surface condition and the minimum thickness of internal linings of cement mortar for ductile iron pipes and fittings for pressure and non-pressure pipelines as defined in ISO 2531 and ISO 7186.
ISO 4179:2005 covers cement mortar linings which are used to improve the hydraulic properties of pip Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 418:1976 - **Identifier:** ISO 418:1976 _(verified: appears in the quote below)_ - **Item title:** Photographic grade sodium sulphite, anhydrous — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 418:1994 - **Withdrawn / published date:** 1976-07-01 _(verified: appears in the quote below)_ > 4426,IS,,ISO 418:1976,"Photographic grade sodium sulphite, anhydrous — Specification",Sulfite de sodium anhydre de qualité photographique — Spécifications,1976-07-01,1,['37.040.30'],ISO/TC 42,9599,,[20285],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 418:1994 - **Identifier:** ISO 418:1994 _(verified: appears in the quote below)_ - **Item title:** Photography — Processing chemicals — Specifications for anhydrous sodium sulfite _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 418:2001 - **Withdrawn / published date:** 1994-04-21 _(verified: appears in the quote below)_ > 20285,IS,,ISO 418:1994,Photography — Processing chemicals — Specifications for anhydrous sodium sulfite,Photographie — Produits chimiques de traitement — Spécifications relatives au sulfite de sodium anhydre,1994-04-21,2,['37.040.30'],ISO/TC 42,9599,[4426],[33087],"['en','fr']",5,"
Establishes criteria for the purity and describes the test methods for insoluble matter content, heavy metals content, iron content, alkalinity, reaction to ammoniacal silver nitrate, thiosulfate, appearance of solution.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4180-1:1980 - **Identifier:** ISO 4180-1:1980 _(verified: appears in the quote below)_ - **Item title:** Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 1: General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4180:2009 | ISO/WD 4180-1 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 9951,IS,,ISO 4180-1:1980,"Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 1: General principles",Emballages d'expédition complets et pleins — Règles générales pour l'établissement de programmes d'essais d'aptitude à l'emploi — Partie 1: Principes généraux,1980-08-01,1,['55.180.40'],ISO/TC 122/SC 3,9599,,"[46598,42031]","['en','fr']",5,"Basic terms are described, such as distribution systems, hazards during transport, laboratory test of packagesd, performance test schedules. Specification is given for the standardization of test methods and order of tests, selection and modification of test intensities, selection of package attit Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4180-2:1980 - **Identifier:** ISO 4180-2:1980 _(verified: appears in the quote below)_ - **Item title:** Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 2: Quantitative data _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4180:2009 | ISO/WD 4180-2 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 9952,IS,,ISO 4180-2:1980,"Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 2: Quantitative data",Emballages d'expédition complets et pleins — Règles générales pour l'établissement des programmes d'essais d'aptitude à l'emploi — Partie 2: Données quantitatives,1980-08-01,1,['55.180.40'],ISO/TC 122/SC 3,9599,,"[46598,42032]","['en','fr']",15,
This part of ISO 4180 incorporates all the quantitative data necessary to establish test intensities and other quantitative features of test schedules. It consists of various tables: Methods of test and factors requiring quantification; Basic test intensities; Preferred range of test intensitie Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 4180:2009 - **Identifier:** ISO 4180:2009 _(verified: appears in the quote below)_ - **Item title:** Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4180:2019 - **Withdrawn / published date:** 2009-02-16 _(verified: appears in the quote below)_ > 46598,IS,,ISO 4180:2009,"Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules",Emballages — Emballages d'expédition complets et pleins — Règles générales pour l'établissement de programmes d'essais de performance,2009-02-16,1,['55.180.40'],ISO/TC 122/SC 3,9599,"[9951,9952]",[69054],"['en','fr']",18,"
ISO 4180:2009 establishes general rules to be used for the compilation of performance test schedules for complete, filled transport packages intended for use within any distribution system except for the packages used for dangerous goods.
For a known distribution environment with experimental data available (case 1), ISO 4180:2 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 114](https://referencesource.org/iso-standard-supersessions/p/114/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 116](https://referencesource.org/iso-standard-supersessions/p/116/) Last verified: 2026-08-05. Review by: 2027-02-02.