This test method covers the use of an impedance tube, two microphone locations and a digital frequency analysis system for the determination of the sound absorption coefficient of sound absorbers for normal sound incidence. It can also be applied for the determination of the acoustical surface impedance or surface admi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10535:1998 - **Identifier:** ISO 10535:1998 _(verified: appears in the quote below)_ - **Item title:** Hoists for the transfer of disabled persons — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10535:2006 - **Withdrawn / published date:** 1998-10-29 _(verified: appears in the quote below)_ > 18604,IS,,ISO 10535:1998,Hoists for the transfer of disabled persons — Requirements and test methods,Lève-personnes pour transférer des personnes handicapées — Exigences et méthodes d'essai,1998-10-29,1,['11.180.10'],ISO/TC 173,9599,,[32155],"['en','fr']",37, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10535:2006 - **Identifier:** ISO 10535:2006 _(verified: appears in the quote below)_ - **Item title:** Hoists for the transfer of disabled persons — Requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10535:2021 - **Withdrawn / published date:** 2006-12-05 _(verified: appears in the quote below)_ > 32155,IS,,ISO 10535:2006,Hoists for the transfer of disabled persons — Requirements and test methods,Lève-personnes pour transférer des personnes handicapées — Exigences et méthodes d'essai,2006-12-05,2,['11.180.10'],ISO/TC 173,9599,[18604],[72711],"['en','fr']",48,"
ISO 10535:2006 specifies requirements and test methods only for hoists and body-support units intended for the transfer of disabled persons as classified in ISO 9999:2002:
ISO 10537:2010 specifies the encapsulation service which is used by space missions to transfer data units that are not directly transferred by the space data link protocols over a ground-to-space or space-to-space communications link.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10537:2010/Amd 1:2015 - **Identifier:** ISO 10537:2010/Amd 1:2015 _(verified: appears in the quote below)_ - **Item title:** Space data and information transfer systems — Encapsulation service — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10537:2016 - **Withdrawn / published date:** 2015-06-16 _(verified: appears in the quote below)_ > 68743,IS,Amd,ISO 10537:2010/Amd 1:2015,Space data and information transfer systems — Encapsulation service — Amendment 1,Systèmes de transfert des informations et données spatiales — Service d'encapsulation — Amendement 1,2015-06-16,1,['49.140'],ISO/TC 20/SC 13,9599,,[71058],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10542-1:2001 - **Identifier:** ISO 10542-1:2001 _(verified: appears in the quote below)_ - **Item title:** Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10542-1:2012 | ISO/NP 10542 - **Withdrawn / published date:** 2001-08-09 _(verified: appears in the quote below)_ > 30077,IS,,ISO 10542-1:2001,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems,Assistances et aides techniques pour les personnes invalides ou handicapées — Systèmes d'attache du fauteuil roulant et de retenue de l'occupant — Partie 1: Exigences générales et méthodes d'essai pour tous les systèmes,2001-08-09,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[60372,46038]",['en'],40, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10542-2:2001 - **Identifier:** ISO 10542-2:2001 _(verified: appears in the quote below)_ - **Item title:** Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 2: Four-point strap-type tiedown systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10542-1:2012 | ISO/NP 10542 - **Withdrawn / published date:** 2001-08-09 _(verified: appears in the quote below)_ > 21409,IS,,ISO 10542-2:2001,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 2: Four-point strap-type tiedown systems,Assistances et aides techniques pour les personnes invalides ou handicapées — Systèmes d'attache du fauteuil roulant et de retenue de l'occupant — Partie 2: Systèmes de sangles d'attache à quatre points,2001-08-09,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[60372,46038]",['en'],7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10542-3:2005 - **Identifier:** ISO 10542-3:2005 _(verified: appears in the quote below)_ - **Item title:** Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 3: Docking-type tiedown systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10542-1:2012 | ISO/NP 10542 - **Withdrawn / published date:** 2005-01-21 _(verified: appears in the quote below)_ > 30495,IS,,ISO 10542-3:2005,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 3: Docking-type tiedown systems,Assistances et aides techniques pour les personnes invalides ou handicapées — Systèmes d'attache du fauteuil roulant et de retenue de l'occupant — Partie 3: Systèmes de fixation par arrimage,2005-01-21,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[60372,46038]",['en'],16,"ISO 10542-3:2005 specifies design and performance requirements and recommendations, instructions and warnings for both installers and users, and product marking and labelling, for wheelchair tiedown and occupant-restraint systems (WTORS) that use a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10542-4:2004 - **Identifier:** ISO 10542-4:2004 _(verified: appears in the quote below)_ - **Item title:** Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 4: Clamp-type tiedown systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10542-1:2012 | ISO/NP 10542 - **Withdrawn / published date:** 2004-10-01 _(verified: appears in the quote below)_ > 30496,IS,,ISO 10542-4:2004,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 4: Clamp-type tiedown systems,Assistances et aides techniques pour les personnes invalides ou handicapées — Systèmes d'attache du fauteuil roulant et de retenue de l'occupant — Partie 4: Systèmes de fixation par crampon,2004-10-01,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[60372,46038]",['en'],7,"
ISO 10542-4:2004 specifies test methods and requirements for design and performance, instructions to installers and users, and product marking and labelling of wheelchair tiedown and occupant-restraint systems (WTORS).
It is applicable only to WTO Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10542-5:2004 - **Identifier:** ISO 10542-5:2004 _(verified: appears in the quote below)_ - **Item title:** Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 5: Systems for specific wheelchairs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10542-1:2012 | ISO/NP 10542 - **Withdrawn / published date:** 2004-04-01 _(verified: appears in the quote below)_ > 30497,IS,,ISO 10542-5:2004,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 5: Systems for specific wheelchairs,Assistances et aides techniques pour les personnes invalides ou handicapées — Systèmes d'attache du fauteuil roulant et de retenue de l'occupant — Partie 5: Systèmes pour fauteuils roulants particuliers,2004-04-01,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[60372,46038]",['en'],8,"
ISO 10542-5:2004 specifies test methods as well as requirements for design and performance, for instructions and warnings to installers and users, and for product marking and labelling of wheelchair tiedown and occupant restraint syst Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10543:1993 - **Identifier:** ISO 10543:1993 _(verified: appears in the quote below)_ - **Item title:** Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10893-12:2011 - **Withdrawn / published date:** 1993-11-18 _(verified: appears in the quote below)_ > 18613,IS,,ISO 10543:1993,Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness testing,Tubes en acier sans soudure et soudés issus d'un laminoir étireur-réducteur pour service sous pression — Contrôle de l'épaisseur par ultrasons sur toute la circonférence,1993-11-18,1,"['77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,[44670],"['en','fr']",3,"
Specifies general requirements and the requirements with regard to the method of test, reference standards, equipment calibration and checking, acceptance, and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10544:1992 - **Identifier:** ISO 10544:1992 _(verified: appears in the quote below)_ - **Item title:** Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10544:2024 - **Withdrawn / published date:** 1992-12-03 _(verified: appears in the quote below)_ > 18614,IS,,ISO 10544:1992,Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric,Fils en acier à béton transformés à froid pour armatures passives et la fabrication des treillis soudés,1992-12-03,1,"['91.080.40','77.140.15']",ISO/TC 17/SC 16,9599,,[82377],"['en','fr']",10,"Specifies technical requirements and test methods (dimensions, masses, tolerances, geometry of ribbed and indented wires, chemical composition, mechanical properties, designation, marking, certification and inspection). Applies to wire made from rod by working through dies or rollers. For wire supplied in coil form, the requirements apply to the straightened product. Wires produced Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-1:1995 - **Identifier:** ISO 10545-1:1995 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 1: Sampling and basis for acceptance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-1:2014 - **Withdrawn / published date:** 1995-11-16 _(verified: appears in the quote below)_ > 18615,IS,,ISO 10545-1:1995,Ceramic tiles — Part 1: Sampling and basis for acceptance,Carreaux et dalles céramiques — Partie 1: Échantillonnage et conditions de réception,1995-11-16,1,['91.100.23'],ISO/TC 189,9599,,[60974],"['en','fr']",5,"
Specifies rules for batching, sampling, inspection and acceptance/rejection of ceramic tiles.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-10:1995 - **Identifier:** ISO 10545-10:1995 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 10: Determination of moisture expansion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-10:2021 - **Withdrawn / published date:** 1995-11-16 _(verified: appears in the quote below)_ > 18623,IS,,ISO 10545-10:1995,Ceramic tiles — Part 10: Determination of moisture expansion,Carreaux et dalles céramiques — Partie 10: Détermination de la dilatation à l'humidité,1995-11-16,1,['91.100.23'],ISO/TC 189,9599,,[72272],"['en','fr']",3,Contains a method for determining the moisture expansion of ceramic tiles by immersing a reheated tile into boiling water and measurement the proportional change in length.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-13:1995 - **Identifier:** ISO 10545-13:1995 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 13: Determination of chemical resistance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-13:2016 - **Withdrawn / published date:** 1995-10-26 _(verified: appears in the quote below)_ > 18629,IS,,ISO 10545-13:1995,Ceramic tiles — Part 13: Determination of chemical resistance,Carreaux et dalles céramiques — Partie 13: Détermination de la résistance chimique,1995-10-26,1,['91.100.23'],ISO/TC 189,9599,,[60975],"['en','fr']",5,Specifies a test method for determining the chemical resistance of ceramic tiles at room temperature. The method is applicable to all types of ceramic tiles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-14:1995 - **Identifier:** ISO 10545-14:1995 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 14: Determination of resistance to stains _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-14:2015 - **Withdrawn / published date:** 1995-11-16 _(verified: appears in the quote below)_ > 18630,IS,,ISO 10545-14:1995,Ceramic tiles — Part 14: Determination of resistance to stains,Carreaux et dalles céramiques — Partie 14: Détermination de la résistance aux taches,1995-11-16,1,['91.100.23'],ISO/TC 189,9599,,[60972],"['en','fr']",6,Gives a method for determining the resistance to stains of the proper surface of ceramic tiles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-14:1995/Cor 1:1997 - **Identifier:** ISO 10545-14:1995/Cor 1:1997 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 14: Determination of resistance to stains — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-14:2015 - **Withdrawn / published date:** 1997-02-06 _(verified: appears in the quote below)_ > 27489,IS,Cor,ISO 10545-14:1995/Cor 1:1997,Ceramic tiles — Part 14: Determination of resistance to stains — Technical Corrigendum 1,Carreaux et dalles céramiques — Partie 14: Détermination de la résistance aux taches — Rectificatif technique 1,1997-02-06,1,['91.100.23'],ISO/TC 189,9599,,[60972],"['en','fr']",1,Replaces diluted 3 + 97 by 3 % Zeichen(V/V) in subclause 5.1.4.1.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-15:1995 - **Identifier:** ISO 10545-15:1995 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 15: Determination of lead and cadmium given off by glazed tiles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-15:2021 - **Withdrawn / published date:** 1995-10-26 _(verified: appears in the quote below)_ > 18626,IS,,ISO 10545-15:1995,Ceramic tiles — Part 15: Determination of lead and cadmium given off by glazed tiles,Carreaux et dalles céramiques — Partie 15: Détermination de la teneur en plomb et en cadmium dégagés par les carreaux émaillés,1995-10-26,1,['91.100.23'],ISO/TC 189,9599,,[72271],"['en','fr']",3,Describes a method for the determination of lead and cadmium given off by the glaze of ceramic tiles. They are placed in an acetic acid solution and the amount of lead and cadmium released is determined by an appropriate method.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-16:1999 - **Identifier:** ISO 10545-16:1999 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 16: Determination of small colour differences _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-16:2010 - **Withdrawn / published date:** 1999-03-11 _(verified: appears in the quote below)_ > 18627,IS,,ISO 10545-16:1999,Ceramic tiles — Part 16: Determination of small colour differences,Carreaux et dalles céramiques — Partie 16: Détermination de faibles différences de couleur,1999-03-11,1,['91.100.23'],ISO/TC 189,9599,,[51090],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-2:1995 - **Identifier:** ISO 10545-2:1995 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 2: Determination of dimensions and surface quality _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-2:2018 - **Withdrawn / published date:** 1995-10-26 _(verified: appears in the quote below)_ > 18616,IS,,ISO 10545-2:1995,Ceramic tiles — Part 2: Determination of dimensions and surface quality,Carreaux et dalles céramiques — Partie 2: Détermination des caractéristiques dimensionnelles et de la qualité de surface,1995-10-26,1,['91.100.23'],ISO/TC 189,9599,,[72246],"['en','fr']",8,"Describes methods for determining the dimensional characteristics (length, width, thickness, straightness of sides, rectangularity, surface flatness) and the surface quality of ceramic tiles. Spacer lugs, glaze blobs and other irregularities shall be ignored.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-2:1995/Cor 1:1997 - **Identifier:** ISO 10545-2:1995/Cor 1:1997 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 2: Determination of dimensions and surface quality — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-2:2018 - **Withdrawn / published date:** 1997-02-06 _(verified: appears in the quote below)_ > 27486,IS,Cor,ISO 10545-2:1995/Cor 1:1997,Ceramic tiles — Part 2: Determination of dimensions and surface quality — Technical Corrigendum 1,Carreaux et dalles céramiques — Partie 2: Détermination des caractéristiques dimensionnelles et de la qualité de surface — Rectificatif technique 1,1997-02-06,1,['91.100.23'],ISO/TC 189,9599,,[72246],"['en','fr']",1,Contains minor amendments in subclause 4.2 and in subclause 6.1.2 and subclause 6.1.3.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-3:1995 - **Identifier:** ISO 10545-3:1995 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-3:2018 - **Withdrawn / published date:** 1995-11-16 _(verified: appears in the quote below)_ > 18617,IS,,ISO 10545-3:1995,"Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density","Carreaux et dalles céramiques — Partie 3: Détermination de l'absorption d'eau, de la porosité ouverte, de la densité relative apparente et de la masse volumique globale",1995-11-16,1,['91.100.23'],ISO/TC 189,9599,,[68006],"['en','fr']",3,"Specifies two methods for determining water absorption, apparent porosity, apparent relative density and bulk density of ceramic tiles. Impregnation is obtained by immersion into boiling water or by immersion under vacuum.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-3:1995/Cor 1:1997 - **Identifier:** ISO 10545-3:1995/Cor 1:1997 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-3:2018 - **Withdrawn / published date:** 1997-02-06 _(verified: appears in the quote below)_ > 27487,IS,Cor,ISO 10545-3:1995/Cor 1:1997,"Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density — Technical Corrigendum 1","Carreaux et dalles céramiques — Partie 3: Détermination de l'absorption d'eau, de la porosité ouverte, de la densité relative apparente et de la masse volumique globale — Rectificatif technique 1",1997-02-06,1,['91.100.23'],ISO/TC 189,9599,,[68006],"['en','fr']",1,Contains minor amendments in subclause 3.10 and subclause 5.1.2.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-4:1994 - **Identifier:** ISO 10545-4:1994 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-4:2004 - **Withdrawn / published date:** 1994-08-11 _(verified: appears in the quote below)_ > 18618,IS,,ISO 10545-4:1994,Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength,Carreaux et dalles céramiques — Partie 4: Détermination de la résistance à la flexion et de la force de rupture,1994-08-11,1,['91.100.23'],ISO/TC 189,9599,,[40694],"['en','fr']",4,Defines a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-4:2004 - **Identifier:** ISO 10545-4:2004 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-4:2014 - **Withdrawn / published date:** 2004-11-10 _(verified: appears in the quote below)_ > 40694,IS,,ISO 10545-4:2004,Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength,Carreaux et dalles céramiques — Partie 4: Détermination de la résistance à la flexion et de la force de rupture,2004-11-10,2,['91.100.23'],ISO/TC 189,9599,[18618],[60976],"['en','fr']",6,ISO 10545-4:2004 specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-4:2014 - **Identifier:** ISO 10545-4:2014 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-4:2019 - **Withdrawn / published date:** 2014-07-04 _(verified: appears in the quote below)_ > 60976,IS,,ISO 10545-4:2014,Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength,Carreaux et dalles céramiques — Partie 4: Détermination de la résistance à la flexion et de la force de rupture,2014-07-04,3,['91.100.23'],ISO/TC 189,9599,[40694],[69619],"['en','fr']",5,ISO 10545-4:2014 specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-6:1995 - **Identifier:** ISO 10545-6:1995 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 6: Determination of resistance to deep abrasion for unglazed tiles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-6:2010 - **Withdrawn / published date:** 1995-10-26 _(verified: appears in the quote below)_ > 18620,IS,,ISO 10545-6:1995,Ceramic tiles — Part 6: Determination of resistance to deep abrasion for unglazed tiles,Carreaux et dalles céramiques — Partie 6: Détermination de la résistance à l'abrasion profonde pour les carreaux non émaillés,1995-10-26,1,['91.100.23'],ISO/TC 189,9599,,[51089],"['en','fr']",4,Describes a test method for determining the resistance to deep abrasion of all unglazed ceramic tiles used for floor coverings.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-8:1994 - **Identifier:** ISO 10545-8:1994 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 8: Determination of linear thermal expansion _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-8:2014 - **Withdrawn / published date:** 1994-08-11 _(verified: appears in the quote below)_ > 1813,IS,,ISO 10545-8:1994,Ceramic tiles — Part 8: Determination of linear thermal expansion,Carreaux et dalles céramiques — Partie 8: Détermination de la dilatation linéique d'origine thermique,1994-08-11,1,['91.100.23'],ISO/TC 189,9599,,[60973],"['en','fr']",2,Defines a test method for determining the coefficient of linear thermal expansion of ceramic tiles.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-9:1994 - **Identifier:** ISO 10545-9:1994 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 9: Determination of resistance to thermal shock _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-9:2004 - **Withdrawn / published date:** 1994-08-11 _(verified: appears in the quote below)_ > 18622,IS,,ISO 10545-9:1994,Ceramic tiles — Part 9: Determination of resistance to thermal shock,Carreaux et dalles céramiques — Partie 9: Détermination de la résistance aux chocs thermiques,1994-08-11,1,['91.100.23'],ISO/TC 189,9599,,[40695],"['en','fr']",2,"Defines a test method for determining the resistance to thermal shock of all ceramic tiles under normal conditions of use. Depending on the water absorption of the tiles, different procedures (tests with or without immersions) are used unless there is an agreement to the contrary.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10545-9:2004 - **Identifier:** ISO 10545-9:2004 _(verified: appears in the quote below)_ - **Item title:** Ceramic tiles — Part 9: Determination of resistance to thermal shock _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10545-9:2013 - **Withdrawn / published date:** 2004-11-12 _(verified: appears in the quote below)_ > 40695,IS,,ISO 10545-9:2004,Ceramic tiles — Part 9: Determination of resistance to thermal shock,Carreaux et dalles céramiques — Partie 9: Détermination de la résistance aux chocs thermiques,2004-11-12,2,['91.100.23'],ISO/TC 189,9599,[18622],[57241],"['en','fr']",3,ISO 10545-9:2004 specifies a test method for determining the resistance to thermal shock of all ceramic tiles under normal conditions of use.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10548:1994 - **Identifier:** ISO 10548:1994 _(verified: appears in the quote below)_ - **Item title:** Carbon fibre — Determination of size content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10548:2002 - **Withdrawn / published date:** 1994-11-03 _(verified: appears in the quote below)_ > 18633,IS,,ISO 10548:1994,Carbon fibre — Determination of size content,Fibres de carbone — Détermination du taux d'ensimage,1994-11-03,1,['59.100.20'],ISO/TC 61/SC 13,9599,,[33312],"['en','fr']",6,Specifies test methods for the determination of the size content of carbon fibre yarn. Applicable to continuous-filament yarns and staple-fibre yarns.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1055:1975 - **Identifier:** ISO 1055:1975 _(verified: appears in the quote below)_ - **Item title:** Zinc and zinc alloys — Determination of iron content — Spectrophotometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 1055 - **Withdrawn / published date:** 1975-06-01 _(verified: appears in the quote below)_ > 5541,IS,,ISO 1055:1975,Zinc and zinc alloys — Determination of iron content — Spectrophotometric method,Zinc et alliages de zinc — Dosage du fer — Méthode spectrophotométrique,1975-06-01,1,['77.120.60'],ISO/TC 18,9599,,[35630],"['en','fr']",2,"The method is applicable to the following zinc alloys: Zn Al 4, Zn Al 4 Cu 1, Zn Al 4 Cu 3, Zn Al 11 Cu 1. It is moreover applicable to die castings made from these alloys, and to zinc containing more than 0,01 % of copper. The method is suitable for the determination of iron contents between 0,01 and 0,08 %.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10551:1995 - **Identifier:** ISO 10551:1995 _(verified: appears in the quote below)_ - **Item title:** Ergonomics of the thermal environment — Assessment of the influence of the thermal environment using subjective judgement scales _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/PWI 10551 | ISO 10551:2019 - **Withdrawn / published date:** 1995-05-18 _(verified: appears in the quote below)_ > 18636,IS,,ISO 10551:1995,Ergonomics of the thermal environment — Assessment of the influence of the thermal environment using subjective judgement scales,Ergonomie des ambiances thermiques — Évaluation de l'influence des ambiances thermiques à l'aide d'échelles de jugements subjectifs,1995-05-18,1,['13.180'],ISO/TC 159/SC 5,9599,,"[57219,67186]","['en','fr']",18,Covers the construction and use of judgement scales for use in providing reliable and comparative data on the subjective aspects of thermal comfort or thermal stress.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10552:1999 - **Identifier:** ISO 10552:1999 _(verified: appears in the quote below)_ - **Item title:** Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10552:2012 - **Withdrawn / published date:** 1999-04-08 _(verified: appears in the quote below)_ > 18637,IS,,ISO 10552:1999,Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions,Instruments horaires — Couronnes et tubes étanches — Constructions et dimensions,1999-04-08,1,['39.040.01'],ISO/TC 114/SC 7,9599,,[60289],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10552:2012 - **Identifier:** ISO 10552:2012 _(verified: appears in the quote below)_ - **Item title:** Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10552:2014 - **Withdrawn / published date:** 2012-01-24 _(verified: appears in the quote below)_ > 60289,IS,,ISO 10552:2012,Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions,Instruments horaires — Couronnes et tubes étanches — Constructions et dimensions,2012-01-24,2,['39.040.01'],ISO/TC 114/SC 7,9599,[18637],[65373],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10553:2003 - **Identifier:** ISO 10553:2003 _(verified: appears in the quote below)_ - **Item title:** Horology — Procedure for evaluating the accuracy of quartz watches _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10553:2018 - **Withdrawn / published date:** 2003-03-18 _(verified: appears in the quote below)_ > 35356,IS,,ISO 10553:2003,Horology — Procedure for evaluating the accuracy of quartz watches,Horlogerie — Procédure d'évaluation de la précision des montres à quartz,2003-03-18,1,['39.040.10'],ISO/TC 114/SC 11,9599,[18638],[69120],"['en','fr']",14,"ISO 10553:2003 specifies the procedure for evaluating the accuracy of quartz watches, individually and by lot, and the relationship between the accuracy tested and the accuracy classification given by the manufacturer.
It applies to quartz watches having accompanying documents on which the accuracy classification is indicated.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-1:1995 - **Identifier:** ISO 10555-1:1995 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-1:2013 - **Withdrawn / published date:** 1995-06-08 _(verified: appears in the quote below)_ > 18640,IS,,ISO 10555-1:1995,"Sterile, single-use intravascular catheters — Part 1: General requirements","Cathéters intravasculaires stériles, non réutilisables — Partie 1: Prescriptions générales",1995-06-08,1,['11.040.25'],ISO/TC 84,9599,,[54884],"['en','fr']",9,"Specifies general requirements for intravascular catheters, supplied in the sterile condition and intended for single use, for any application. Does not apply to intravascular catheter accessories, which will be covered by a separate standard.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-1:1995/Amd 1:1999 - **Identifier:** ISO 10555-1:1995/Amd 1:1999 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 1: General requirements — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-1:2013 - **Withdrawn / published date:** 1999-07-22 _(verified: appears in the quote below)_ > 29526,IS,Amd,ISO 10555-1:1995/Amd 1:1999,"Sterile, single-use intravascular catheters — Part 1: General requirements — Amendment 1","Cathéters intravasculaires stériles, non réutilisables — Partie 1: Prescriptions générales — Amendement 1",1999-07-22,1,['11.040.25'],ISO/TC 84,9599,,[54884],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-1:1995/Amd 2:2004 - **Identifier:** ISO 10555-1:1995/Amd 2:2004 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 1: General requirements — Amendment 2 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-1:2013 - **Withdrawn / published date:** 2004-05-13 _(verified: appears in the quote below)_ > 33786,IS,Amd,ISO 10555-1:1995/Amd 2:2004,"Sterile, single-use intravascular catheters — Part 1: General requirements — Amendment 2","Cathéters intravasculaires stériles, non réutilisables — Partie 1: Prescriptions générales — Amendement 2",2004-05-13,1,['11.040.25'],ISO/TC 84,9599,,[54884],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-1:2013 - **Identifier:** ISO 10555-1:2013 _(verified: appears in the quote below)_ - **Item title:** Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-1:2023 - **Withdrawn / published date:** 2013-06-06 _(verified: appears in the quote below)_ > 54884,IS,,ISO 10555-1:2013,Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements,Cathéters intravasculaires — Cathéters stériles et non réutilisables — Partie 1: Exigences générales,2013-06-06,2,['11.040.25'],ISO/TC 84,9599,"[19053,33786,18640,29526,37142]",[76494],"['en','fr','ru']",24,"ISO 10555-1:2013 specifies general requirements for intravascular catheters, supplied in the sterile condition and intended for single use, for any application.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-1:2013/Amd 1:2017 - **Identifier:** ISO 10555-1:2013/Amd 1:2017 _(verified: appears in the quote below)_ - **Item title:** Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-1:2023 - **Withdrawn / published date:** 2017-11-16 _(verified: appears in the quote below)_ > 70319,IS,Amd,ISO 10555-1:2013/Amd 1:2017,Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1,Cathéters intravasculaires — Cathéters stériles et non réutilisables — Partie 1: Exigences générales — Amendement 1,2017-11-16,2,['11.040.25'],ISO/TC 84,9599,,[76494],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-2:1996 - **Identifier:** ISO 10555-2:1996 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 2: Angiographic catheters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-1:2013 | ISO/CD 10555-2 - **Withdrawn / published date:** 1996-06-20 _(verified: appears in the quote below)_ > 19053,IS,,ISO 10555-2:1996,"Sterile, single-use intravascular catheters — Part 2: Angiographic catheters","Cathéters intravasculaires stériles, non réutilisables — Partie 2: Cathéters angiographiques",1996-06-20,1,['11.040.25'],ISO/TC 84,9599,,"[54884,60616]","['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-2:1996/Cor 1:2002 - **Identifier:** ISO 10555-2:1996/Cor 1:2002 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 2: Angiographic catheters — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-1:2013 | ISO/CD 10555-2 - **Withdrawn / published date:** 2002-06-06 _(verified: appears in the quote below)_ > 37142,IS,Cor,ISO 10555-2:1996/Cor 1:2002,"Sterile, single-use intravascular catheters — Part 2: Angiographic catheters — Technical Corrigendum 1","Cathéters intravasculaires stériles, non réutilisables — Partie 2: Cathéters angiographiques — Rectificatif technique 1",2002-06-06,1,['11.040.25'],ISO/TC 84,9599,,"[54884,60616]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-3:1996 - **Identifier:** ISO 10555-3:1996 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 3: Central venous catheters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-3:2013 - **Withdrawn / published date:** 1996-06-20 _(verified: appears in the quote below)_ > 19054,IS,,ISO 10555-3:1996,"Sterile, single-use intravascular catheters — Part 3: Central venous catheters","Cathéters intravasculaires stériles, non réutilisables — Partie 3: Cathéters centraux veineux",1996-06-20,1,['11.040.25'],ISO/TC 84,9599,,[57382],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-3:1996/Cor 1:2002 - **Identifier:** ISO 10555-3:1996/Cor 1:2002 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 3: Central venous catheters — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-3:2013 - **Withdrawn / published date:** 2002-06-06 _(verified: appears in the quote below)_ > 37143,IS,Cor,ISO 10555-3:1996/Cor 1:2002,"Sterile, single-use intravascular catheters — Part 3: Central venous catheters — Technical Corrigendum 1","Cathéters intravasculaires stériles, non réutilisables — Partie 3: Cathéters centraux veineux — Rectificatif technique 1",2002-06-06,1,['11.040.25'],ISO/TC 84,9599,,[57382],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-4:1996 - **Identifier:** ISO 10555-4:1996 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 4: Balloon dilatation catheters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-4:2013 - **Withdrawn / published date:** 1996-06-20 _(verified: appears in the quote below)_ > 19056,IS,,ISO 10555-4:1996,"Sterile, single-use intravascular catheters — Part 4: Balloon dilatation catheters","Cathéters intravasculaires stériles, non réutilisables — Partie 4: Cathéters de dilatation à ballonnets",1996-06-20,1,['11.040.25'],ISO/TC 84,9599,,[57383],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-4:1996/Cor 1:2002 - **Identifier:** ISO 10555-4:1996/Cor 1:2002 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 4: Balloon dilatation catheters — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-4:2013 - **Withdrawn / published date:** 2002-06-06 _(verified: appears in the quote below)_ > 37144,IS,Cor,ISO 10555-4:1996/Cor 1:2002,"Sterile, single-use intravascular catheters — Part 4: Balloon dilatation catheters — Technical Corrigendum 1","Cathéters intravasculaires stériles, non réutilisables — Partie 4: Cathéters de dilatation à ballonnets — Rectificatif technique 1",2002-06-06,1,['11.040.25'],ISO/TC 84,9599,,[57383],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-4:2013 - **Identifier:** ISO 10555-4:2013 _(verified: appears in the quote below)_ - **Item title:** Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-4:2023 - **Withdrawn / published date:** 2013-06-06 _(verified: appears in the quote below)_ > 57383,IS,,ISO 10555-4:2013,Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters,Cathéters intravasculaires — Cathéters stériles et non réutilisables — Partie 4: Cathéters de dilatation à ballonnets,2013-06-06,2,['11.040.25'],ISO/TC 84,9599,"[19056,37144]",[76495],"['en','fr','ru']",12,"ISO 10555-4:2013 specifies requirements for balloon dilatation catheters supplied in the sterile condition, and intended for single use.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-5:1996 - **Identifier:** ISO 10555-5:1996 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-5:2013 - **Withdrawn / published date:** 1996-06-20 _(verified: appears in the quote below)_ > 23063,IS,,ISO 10555-5:1996,"Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters","Cathéters intravasculaires stériles, non réutilisables — Partie 5: Cathéters périphériques à aiguille interne",1996-06-20,1,['11.040.25'],ISO/TC 84,9599,,[54885],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-5:1996/Amd 1:1999 - **Identifier:** ISO 10555-5:1996/Amd 1:1999 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-5:2013 - **Withdrawn / published date:** 1999-01-21 _(verified: appears in the quote below)_ > 29092,IS,Amd,ISO 10555-5:1996/Amd 1:1999,"Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters — Amendment 1","Cathéters intravasculaires stériles, non réutilisables — Partie 5: Cathéters périphériques à aiguille interne — Amendement 1",1999-01-21,1,['11.040.25'],ISO/TC 84,9599,,[54885],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10555-5:1996/Cor 1:2002 - **Identifier:** ISO 10555-5:1996/Cor 1:2002 _(verified: appears in the quote below)_ - **Item title:** Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10555-5:2013 - **Withdrawn / published date:** 2002-06-06 _(verified: appears in the quote below)_ > 37145,IS,Cor,ISO 10555-5:1996/Cor 1:2002,"Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters — Technical Corrigendum 1","Cathéters intravasculaires stériles, non réutilisables — Partie 5: Cathéters périphériques à aiguille interne — Rectificatif technique 1",2002-06-06,1,['11.040.25'],ISO/TC 84,9599,,[54885],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1056:1975 - **Identifier:** ISO 1056:1975 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 1056:1975 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6983-1:1982 - **Withdrawn / published date:** 1975-02-01 _(verified: appears in the quote below)_ > 5542,IS,,ISO 1056:1975,Withdrawal of ISO 1056:1975,Annulation de l'ISO 1056:1975,1975-02-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10563:1991 - **Identifier:** ISO 10563:1991 _(verified: appears in the quote below)_ - **Item title:** Building construction — Sealants for joints — Determination of change in mass and volume _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10563:2005 - **Withdrawn / published date:** 1991-07-11 _(verified: appears in the quote below)_ > 18648,IS,,ISO 10563:1991,Building construction — Sealants for joints — Determination of change in mass and volume,Construction immobilière — Mastics pour joints — Détermination des variations de masse et de volume,1991-07-11,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[35009],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10563:2005 - **Identifier:** ISO 10563:2005 _(verified: appears in the quote below)_ - **Item title:** Building construction — Sealants — Determination of change in mass and volume _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10563:2017 - **Withdrawn / published date:** 2005-06-30 _(verified: appears in the quote below)_ > 35009,IS,,ISO 10563:2005,Building construction — Sealants — Determination of change in mass and volume,Construction immobilière — Mastics — Détermination des variations de masse et de volume,2005-06-30,2,['91.100.50'],ISO/TC 59/SC 8,9599,[18648],[68416],"['en','fr']",3,ISO 10563:2005 specifies a method for the determination of the change of mass and the change of volume of sealants used in joints in building construction. It is not suitable for self-levelling sealants.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10563:2017 - **Identifier:** ISO 10563:2017 _(verified: appears in the quote below)_ - **Item title:** Buildings and civil engineering works — Sealants — Determination of change in mass and volume _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10563:2023 - **Withdrawn / published date:** 2017-05-29 _(verified: appears in the quote below)_ > 68416,IS,,ISO 10563:2017,Buildings and civil engineering works — Sealants — Determination of change in mass and volume,Bâtiments et ouvrages de génie civil — Mastics — Détermination des variations de masse et de volume,2017-05-29,3,['91.100.50'],ISO/TC 59/SC 8,9599,[35009],[86193],"['en','fr']",4,ISO 10563:2017 specifies a method for the determination of the change of mass and the change of volume of self-levelling and non-sagging sealants used in joints in building construction.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10565:1993 - **Identifier:** ISO 10565:1993 _(verified: appears in the quote below)_ - **Item title:** Oilseeds — Simultaneous determination of oil and moisture contents — Method using pulsed nuclear magnetic resonance spectrometry _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10565:1998 - **Withdrawn / published date:** 1993-08-12 _(verified: appears in the quote below)_ > 18650,IS,,ISO 10565:1993,Oilseeds — Simultaneous determination of oil and moisture contents — Method using pulsed nuclear magnetic resonance spectrometry,Graines oléagineuses — Détermination simultanée de la teneur en huile et en eau — Méthode par spectrométrie par résonance magnétique nucléaire pulsée,1993-08-12,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[26317],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10567:1992 - **Identifier:** ISO 10567:1992 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery — Hydraulic excavators — Lift capacity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10567:2007 - **Withdrawn / published date:** 1992-07-29 _(verified: appears in the quote below)_ > 18652,IS,,ISO 10567:1992,Earth-moving machinery — Hydraulic excavators — Lift capacity,Engins de terrassement — Pelles hydrauliques — Capacité de levage,1992-07-29,1,['53.100'],ISO/TC 127/SC 2,9599,,[32386],"['en','fr']",10,Provides a uniform method of calculation of tipping load and hydraulic lift capacity as well as a test procedure for verifying the calculations. Annex A describes a typical rated lift capacity chart.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1057:1973 - **Identifier:** ISO 1057:1973 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 1057-1973 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6983-1:1982 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 5544,IS,,ISO 1057:1973,Withdrawal of ISO 1057-1973,Annulation de l'ISO 1057-1973,1973-12-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10570:1992 - **Identifier:** ISO 10570:1992 _(verified: appears in the quote below)_ - **Item title:** Earth-moving machinery — Articulated frame lock — Performance requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 10570 | ISO 10570:2004 - **Withdrawn / published date:** 1992-07-02 _(verified: appears in the quote below)_ > 18655,IS,,ISO 10570:1992,Earth-moving machinery — Articulated frame lock — Performance requirements,Engins de terrassement — Dispositif de verrouillage pour direction par châssis articulé — Exigences de performance,1992-07-02,1,['53.100'],ISO/TC 127/SC 2,9599,,"[31187,37677]","['en','fr']",1,"Defines the requirements for mounting positions, attachment to machine, colour, performance (deformation).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10571:1995 - **Identifier:** ISO 10571:1995 _(verified: appears in the quote below)_ - **Item title:** Tyres for mobile cranes and similar specialized machines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10571:2011 - **Withdrawn / published date:** 1995-09-28 _(verified: appears in the quote below)_ > 23721,IS,,ISO 10571:1995,Tyres for mobile cranes and similar specialized machines,Pneumatiques pour grues mobiles et engins spéciaux similaires,1995-09-28,1,['83.160.99'],ISO/TC 31/SC 6,9599,,[46124],"['en','fr']",6,"Provides the designation, dimensions, load ratings and reference speed for tyres and rims of all-terrain vehicles, mobile cranes and similar specialized vehicles likely to operate on the highway over long distances.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10571:2011 - **Identifier:** ISO 10571:2011 _(verified: appears in the quote below)_ - **Item title:** Tyres for mobile cranes and similar specialized machines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10571:2016 - **Withdrawn / published date:** 2011-06-29 _(verified: appears in the quote below)_ > 46124,IS,,ISO 10571:2011,Tyres for mobile cranes and similar specialized machines,Pneumatiques pour grues mobiles et engins spéciaux similaires,2011-06-29,2,"['53.020.20','83.160.99']",ISO/TC 31/SC 6,9599,[23721],[65217],"['en','fr']",8,"ISO 10571:2011 specifies the designation, dimensions, load ratings and reference speed for tyres and rims fitted to vehicles such as all-terrain equipment, mobile cranes, crash tenders, etc. likely to operate on highway over long distances at reference speed and under constant load.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10571:2016 - **Identifier:** ISO 10571:2016 _(verified: appears in the quote below)_ - **Item title:** Tyres for mobile cranes and similar specialized machines _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10571:2024 - **Withdrawn / published date:** 2016-04-04 _(verified: appears in the quote below)_ > 65217,IS,,ISO 10571:2016,Tyres for mobile cranes and similar specialized machines,Pneumatiques pour grues mobiles et engins spéciaux similaires,2016-04-04,3,"['53.020.20','83.160.99']",ISO/TC 31/SC 6,9599,[46124],[86023],"['en','fr']",9,"ISO 10571:2016 specifies the designation, dimensions, load ratings and reference speed for tyres and rims fitted to vehicles, such as all-terrain equipment, mobile cranes, crash tenders, etc., likely to operate on highway over long distances at reference speed and under constant load.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10574:1993 - **Identifier:** ISO 10574:1993 _(verified: appears in the quote below)_ - **Item title:** Refrigerated light-hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Float-type level gauges _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 18132-1:2006 | ISO 18132-2:2008 | ISO/CD 10574 - **Withdrawn / published date:** 1993-03-11 _(verified: appears in the quote below)_ > 18659,IS,,ISO 10574:1993,Refrigerated light-hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Float-type level gauges,Hydrocarbures légers réfrigérés — Mesurage du niveau de liquide dans les réservoirs contenant des gaz liquéfiés — Jauges à flotteur,1993-03-11,1,['75.180.30'],ISO/TC 28/SC 5,9599,,"[38592,42949,31265]","['en','fr']",7,Specifies the essential requirements and verification procedures for float-type level gauges (including those operated by servomechanism) for ship and shore tanks.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10576-1:2003 - **Identifier:** ISO 10576-1:2003 _(verified: appears in the quote below)_ - **Item title:** Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10576:2022 - **Withdrawn / published date:** 2003-03-10 _(verified: appears in the quote below)_ > 32373,IS,,ISO 10576-1:2003,Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles,Méthodes statistiques — Lignes directrices pour l'évaluation de la conformité à des exigences spécifiques — Partie 1: Principes généraux,2003-03-10,1,['03.120.30'],ISO/TC 69/SC 6,9599,,[78878],"['en','fr']",15,"ISO 10576-1:2002 sets out guidelines for drafting requirements that may be formulated as limiting values for a quantifiable characteristic and for checking conformity to such requirements when the test or measurement result is subject to uncertainty.
It is applicable whenever the uncertainty may be quantified according to the pr Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10578:1992 - **Identifier:** ISO 10578:1992 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Tolerancing of orientation and location — Projected tolerance zone _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1101:2012 - **Withdrawn / published date:** 1992-07-09 _(verified: appears in the quote below)_ > 18662,IS,,ISO 10578:1992,Technical drawings — Tolerancing of orientation and location — Projected tolerance zone,Dessins techniques — Tolérancement d'orientation et de position — Zone de tolérance projetée,1992-07-09,1,['01.100.20'],ISO/TC 213,9599,,[59490],"['en','fr']",6,"
Defines the method of tolerancing by indication of a projected tolerance zone and specifies the method of indication. Annex A gives examples of indication on drawings, interpretation and functional length.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10579:1993 - **Identifier:** ISO 10579:1993 _(verified: appears in the quote below)_ - **Item title:** Technical drawings — Dimensioning and tolerancing — Non-rigid parts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10579:2010 - **Withdrawn / published date:** 1993-01-28 _(verified: appears in the quote below)_ > 18663,IS,,ISO 10579:1993,Technical drawings — Dimensioning and tolerancing — Non-rigid parts,Dessins techniques — Cotation et tolérancement — Pièces non rigides,1993-01-28,1,['01.100.20'],ISO/TC 213,9599,,[54707],"['en','fr']",3,Gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing and specifies indications on drawings.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1058:1973 - **Identifier:** ISO 1058:1973 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 1058-1973 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6983-1:1982 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 5545,IS,,ISO 1058:1973,Withdrawal of ISO 1058-1973,Annulation de l'ISO 1058-1973,1973-12-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10581:2011 - **Identifier:** ISO 10581:2011 _(verified: appears in the quote below)_ - **Item title:** Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10581:2019 - **Withdrawn / published date:** 2011-08-25 _(verified: appears in the quote below)_ > 46013,IS,,ISO 10581:2011,Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications,Revêtements de sol résilients — Revêtements de sol homogènes en poly(chlorure de vinyle) — Spécifications,2011-08-25,1,['97.150'],ISO/TC 219,9599,,[73552],"['en','fr']",7,"ISO 10581:2011 specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10581:2011 includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should giv Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10582:2010 - **Identifier:** ISO 10582:2010 _(verified: appears in the quote below)_ - **Item title:** Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor coverings — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10582:2017 - **Withdrawn / published date:** 2010-09-22 _(verified: appears in the quote below)_ > 46014,IS,,ISO 10582:2010,Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor coverings — Specification,Revêtements de sol résilients — Revêtements de sol hétérogènes en poly(chlorure de vinyle) — Spécifications,2010-09-22,1,['97.150'],ISO/TC 219,9599,,[64608],"['en','fr']",7,"
ISO 10582:2010 specifies the characteristics of non-cushioned, heterogeneous floor coverings, based on poly(vinyl chloride) (PVC), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10582:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10583:1993 - **Identifier:** ISO 10583:1993 _(verified: appears in the quote below)_ - **Item title:** Aerospace fluid systems — Test methods for tube/fitting assemblies _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 10583 | ISO/CD 10583 | ISO/DIS 10583 | ISO 10583:2026 - **Withdrawn / published date:** 1993-05-13 _(verified: appears in the quote below)_ > 18667,IS,,ISO 10583:1993,Aerospace fluid systems — Test methods for tube/fitting assemblies,Circuits de fluides pour l'aérospatiale — Méthodes d'essai des assemblages tube/raccordement,1993-05-13,1,['49.080'],ISO/TC 20/SC 10,9599,,"[62567,40013,80019,88378]","['en','fr']",4,"
The test methods specified apply to fitting assemblies used in aircraft fluid systems in the pressure and temperature ranges covered by pressure classes B, D and E, and temperature types I, II and III of ISO 6771. Applies each time that it is referred to in a procurement specification or other definition document which contain the pass/fail criteria for these tests.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1059:1973 - **Identifier:** ISO 1059:1973 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 1059-1973 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 6983-1:1982 - **Withdrawn / published date:** 1973-12-01 _(verified: appears in the quote below)_ > 5546,IS,,ISO 1059:1973,Withdrawal of ISO 1059-1973,Annulation de l'ISO1059-1973,1973-12-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10590:1991 - **Identifier:** ISO 10590:1991 _(verified: appears in the quote below)_ - **Item title:** Building construction — Sealants — Determination of adhesion/cohesion properties at maintained extension after immersion in water _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10590:2005 - **Withdrawn / published date:** 1991-10-24 _(verified: appears in the quote below)_ > 18674,IS,,ISO 10590:1991,Building construction — Sealants — Determination of adhesion/cohesion properties at maintained extension after immersion in water,Construction immobililère — Mastics — Détermination des propriétés d'adhésivité/cohésion sous traction maintenue après immersion dans l'eau,1991-10-24,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[35010],"['en','fr']",3,"Specifies a method for the determination of the influence of water immersion. Describes the principle, the apparatus, the preparation of specimens, conditioning methods, the test procedure, and the contents of the test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10591:1991 - **Identifier:** ISO 10591:1991 _(verified: appears in the quote below)_ - **Item title:** Building construction — Sealants — Determination of adhesion/cohesion properties after immersion in water _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10591:2005 - **Withdrawn / published date:** 1991-10-24 _(verified: appears in the quote below)_ > 18675,IS,,ISO 10591:1991,Building construction — Sealants — Determination of adhesion/cohesion properties after immersion in water,Construction immobilière — Mastics — Détermination des propriétés d'adhésivité/cohésion après immersion dans l'eau,1991-10-24,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[35011],"['en','fr']",3,"Specifies a method for the determination of the influence of water immersion. Describes the principle, the apparatus, the preparation of specimens, conditioning methods, the test procedure, and the contents of the test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10591:2005 - **Identifier:** ISO 10591:2005 _(verified: appears in the quote below)_ - **Item title:** Building construction — Sealants — Determination of adhesion/cohesion properties of sealants after immersion in water _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10591:2021 - **Withdrawn / published date:** 2005-06-30 _(verified: appears in the quote below)_ > 35011,IS,,ISO 10591:2005,Building construction — Sealants — Determination of adhesion/cohesion properties of sealants after immersion in water,Construction immobilière — Produits pour joints — Détermination des propriétés d'adhésivité/cohésion des mastics après immersion dans l'eau,2005-06-30,2,['91.100.50'],ISO/TC 59/SC 8,9599,[18675],[82036],"['en','fr']",5,ISO 10591:2005 specifies a method for the determination of the influence of water on the adhesion cohesion properties of sealants with predominantly plastic behaviour which are used in joints in building construction.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10592:1994 - **Identifier:** ISO 10592:1994 _(verified: appears in the quote below)_ - **Item title:** Small craft — Hydraulic steering systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10592:2022 - **Withdrawn / published date:** 1994-09-29 _(verified: appears in the quote below)_ > 18676,IS,,ISO 10592:1994,Small craft — Hydraulic steering systems,Navires de plaisance — Appareils à gouverner hydrauliques,1994-09-29,1,['47.080'],ISO/TC 188,9599,,[75811],['en'],8,"Specifies requirements, test methods, manuals for both the owner and the installer, and the designation for hydraulic steering systems and components from the wheel to the interface point for outboard motor, inboard motor and inboard-outdrive steering arrangements, used on small craft of up to 24 m length of hull.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10594:1997 - **Identifier:** ISO 10594:1997 _(verified: appears in the quote below)_ - **Item title:** Micrographics — Rotary camera systems — Test target for checking performance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10594:2006 - **Withdrawn / published date:** 1997-12-11 _(verified: appears in the quote below)_ > 18678,IS,,ISO 10594:1997,Micrographics — Rotary camera systems — Test target for checking performance,Micrographie — Systèmes de caméras cinétiques — Cible de contrôle pour vérifier la performance,1997-12-11,1,['37.080'],ISO/TC 171/SC 1,9599,,[37806],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10597:1998 - **Identifier:** ISO 10597:1998 _(verified: appears in the quote below)_ - **Item title:** Commercial road vehicles — Flat attachment fixing nuts — Test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10597:2004 - **Withdrawn / published date:** 1998-10-08 _(verified: appears in the quote below)_ > 18679,IS,,ISO 10597:1998,Commercial road vehicles — Flat attachment fixing nuts — Test methods,Véhicules utilitaires — Écrous de fixation des roues à attache plate — Méthodes d'essai,1998-10-08,1,['43.040.50'],ISO/TC 22,9599,,[38883],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10597:2004 - **Identifier:** ISO 10597:2004 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10597:2012 - **Withdrawn / published date:** 2004-11-12 _(verified: appears in the quote below)_ > 38883,IS,,ISO 10597:2004,Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods,Véhicules routiers — Écrous de fixation des roues à attache plate pour véhicules utilitaires — Méthodes d'essai,2004-11-12,2,['43.040.50'],ISO/TC 22,9599,[18679],[60393],"['en','fr']",6,"ISO 10597:2004 specifies test methods and performance requirements for ensuring proper wheel or rim assembly on road vehicles by means of hexagonal nuts with a flat seating captive washer used with 18 mm, 20 mm and 22 mm studs. It is applicable to commercial vehicles as defined in ISO 3833 and to those nuts as specified in ISO 7575. It is not applicable to fasteners for less common or special applic Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1060-1:1982 - **Identifier:** ISO 1060-1:1982 _(verified: appears in the quote below)_ - **Item title:** Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1060-1:1998 - **Withdrawn / published date:** 1982-03-01 _(verified: appears in the quote below)_ > 5548,IS,,ISO 1060-1:1982,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation,Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle — Partie 1: Désignation,1982-03-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,"[7789,5547]",[25189],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1060-1:1998 - **Identifier:** ISO 1060-1:1998 _(verified: appears in the quote below)_ - **Item title:** Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 24024-1:2021 - **Withdrawn / published date:** 1998-03-19 _(verified: appears in the quote below)_ > 25189,IS,,ISO 1060-1:1998,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation system and basis for specifications,Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle — Partie 1: Système de désignation et base de spécification,1998-03-19,2,['83.080.20'],ISO/TC 61/SC 9,9599,[5548],[77543],"['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1060:1975 - **Identifier:** ISO 1060:1975 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 1060-1975 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1060-1:1982 - **Withdrawn / published date:** 1975-06-01 _(verified: appears in the quote below)_ > 5547,IS,,ISO 1060:1975,Withdrawal of ISO 1060-1975,Annulation de l'ISO 1060-1975,1975-06-01,1,['83.080.20'],ISO/TC 61,9599,,[5548],['en'],3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1060-2:1978 - **Identifier:** ISO 1060-2:1978 _(verified: appears in the quote below)_ - **Item title:** Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1060-2:1985 - **Withdrawn / published date:** 1978-10-01 _(verified: appears in the quote below)_ > 5549,IS,,ISO 1060-2:1978,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties,Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle — Partie 2: Détermination des propriétés,1978-10-01,1,['83.080.20'],ISO/TC 61,9599,,[5550],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1060-2:1985 - **Identifier:** ISO 1060-2:1985 _(verified: appears in the quote below)_ - **Item title:** Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1060-2:1998 - **Withdrawn / published date:** 1985-01-31 _(verified: appears in the quote below)_ > 5550,IS,,ISO 1060-2:1985,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties,Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle — Partie 2: Détermination des propriétés,1985-01-31,2,['83.080.20'],ISO/TC 61/SC 9,9599,[5549],[25190],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1060-2:1998 - **Identifier:** ISO 1060-2:1998 _(verified: appears in the quote below)_ - **Item title:** Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Preparation of test samples and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 24024-2:2021 | ISO/CD 1060-2 - **Withdrawn / published date:** 1998-03-19 _(verified: appears in the quote below)_ > 25190,IS,,ISO 1060-2:1998,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Preparation of test samples and determination of properties,Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle — Partie 2: Préparation des échantillons pour essai et détermination des propriétés,1998-03-19,3,['83.080.20'],ISO/TC 61/SC 9,9599,[5550],"[77544,52891]","['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10601:1993 - **Identifier:** ISO 10601:1993 _(verified: appears in the quote below)_ - **Item title:** Micaceous iron oxide pigments for paints — Specifications and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10601:2007 - **Withdrawn / published date:** 1993-08-26 _(verified: appears in the quote below)_ > 18684,IS,,ISO 10601:1993,Micaceous iron oxide pigments for paints — Specifications and test methods,Pigments d'oxyde de fer micacé pour peintures — Spécifications et méthodes d'essai,1993-08-26,1,['87.060.10'],ISO/TC 256,9599,,[38753],"['en','fr']",4,"
Specifies the requirements and corresponding test methods for manufactured and natural MIO pigments, in dry form, used primarily in protective coatings for steelwork. In accordance with current practice, the general requirements have been sub-divided to give those that are essential and those that are conditional upon prior agreement between the interested parties.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10602:1993 - **Identifier:** ISO 10602:1993 _(verified: appears in the quote below)_ - **Item title:** Photography — Processed silver-gelatin type black-and-white film — Specifications for stability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10602:1995 - **Withdrawn / published date:** 1993-02-25 _(verified: appears in the quote below)_ > 18685,IS,,ISO 10602:1993,Photography — Processed silver-gelatin type black-and-white film — Specifications for stability,Photographie — Film de type gélatino-argentique noir et blanc traité — Spécifications pour la stabilité,1993-02-25,1,['37.040.20'],ISO/TC 42,9599,"[10207,10209]",[23092],"['en','fr']",18, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10602:1995 - **Identifier:** ISO 10602:1995 _(verified: appears in the quote below)_ - **Item title:** Photography — Processed silver-gelatin type black-and-white film — Specifications for stability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 18901:2002 - **Withdrawn / published date:** 1995-01-26 _(verified: appears in the quote below)_ > 23092,IS,,ISO 10602:1995,Photography — Processed silver-gelatin type black-and-white film — Specifications for stability,Photographie — Film de type gélatino-argentique noir et blanc traité — Spécifications relatives à la stabilité,1995-01-26,2,['37.040.20'],ISO/TC 42,9599,[18685],[31925],['en'],18,"Establishes the specifications for photographic films intended for the storage of records. Applies specifically to films with a base of safety cellulose ester or polyester Äpoly(ethylene terephthalate)Ü having silver-gelatin emulsions, processed to produce a black-and-white silver image by negative or full-reversal processing. The films that may have ultrasonic or dielectric (induction heated) Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10604:1993 - **Identifier:** ISO 10604:1993 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Measurement equipment for orientation of headlamp luminous beams _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10604:2026 - **Withdrawn / published date:** 1993-01-28 _(verified: appears in the quote below)_ > 18687,IS,,ISO 10604:1993,Road vehicles — Measurement equipment for orientation of headlamp luminous beams,Véhicules routiers — Équipement de mesure de l'orientation des faisceaux lumineux émis par les projecteurs,1993-01-28,1,['43.180'],ISO/TC 22/SC 35,9599,,[87235],"['en','fr']",8,"
Specifies the dimensional, mechanical and optical quality criteria for equipment to measure or to verify the orientation of the luminous beams emitted by the headlamps installed on road motor vehicles excluding mopeds and motorcycles. The equipment also allows evaluation of the quality of the luminous beams by visual means. Lays down the requirements for the floor on which the vehicles are placed, the vehicle Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10605:2001 - **Identifier:** ISO 10605:2001 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Test methods for electrical disturbances from electrostatic discharge _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10605:2008 - **Withdrawn / published date:** 2001-12-20 _(verified: appears in the quote below)_ > 24562,IS,,ISO 10605:2001,Road vehicles — Test methods for electrical disturbances from electrostatic discharge,Véhicules routiers — Méthodes d'essai des perturbations électriques provenant de décharges électrostatiques,2001-12-20,1,['43.040.10'],ISO/TC 22,9599,[18688],[41937],"['en','fr']",19,"
This International Standard specifies electrostatic discharge (ESD) test methods for evaluating electronic modules intended for use in road vehicles, including procedures for evaluating electronic modules on both the bench and on completed vehicles. Additionally, it specifies a test procedure for classifying the ESD sensitivity of modules for packaging and handling, a procedure for calibrating the s Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10605:2008 - **Identifier:** ISO 10605:2008 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Test methods for electrical disturbances from electrostatic discharge _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10605:2023 - **Withdrawn / published date:** 2008-07-07 _(verified: appears in the quote below)_ > 41937,IS,,ISO 10605:2008,Road vehicles — Test methods for electrical disturbances from electrostatic discharge,Véhicules routiers — Méthodes d'essai des perturbations électriques provenant de décharges électrostatiques,2008-07-07,2,['43.040.10'],ISO/TC 22/SC 32,9599,[24562],[79094],"['en','fr']",50,"
ISO 10605:2008 specifies the electrostatic discharge (ESD) test methods necessary to evaluate electronic modules intended for vehicle use. It applies to discharges in the following cases:
ESD applied to the device under test (DUT) can directly influence the DUT. ES Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10605:2008/Amd 1:2014 - **Identifier:** ISO 10605:2008/Amd 1:2014 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Test methods for electrical disturbances from electrostatic discharge — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10605:2023 - **Withdrawn / published date:** 2014-04-10 _(verified: appears in the quote below)_ > 61135,IS,Amd,ISO 10605:2008/Amd 1:2014,Road vehicles — Test methods for electrical disturbances from electrostatic discharge — Amendment 1,Véhicules routiers — Méthodes d'essai des perturbations électriques provenant de décharges électrostatiques — Amendement 1,2014-04-10,2,['43.040.10'],ISO/TC 22/SC 32,9599,,[79094],['en'],6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10605:2008/Cor 1:2010 - **Identifier:** ISO 10605:2008/Cor 1:2010 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Test methods for electrical disturbances from electrostatic discharge — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10605:2023 - **Withdrawn / published date:** 2010-02-25 _(verified: appears in the quote below)_ > 55917,IS,Cor,ISO 10605:2008/Cor 1:2010,Road vehicles — Test methods for electrical disturbances from electrostatic discharge — Technical Corrigendum 1,Véhicules routiers — Méthodes d'essai des perturbations électriques provenant de décharges électrostatiques — Rectificatif technique 1,2010-02-25,2,['43.040.10'],ISO/TC 22/SC 32,9599,,[79094],['en'],1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10606:1995 - **Identifier:** ISO 10606:1995 _(verified: appears in the quote below)_ - **Item title:** Steel for the reinforcement of concrete — Determination of percentage total elongation at maximum force _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 15630-2:2002 | ISO 15630-3:2002 | ISO 15630-1:2002 - **Withdrawn / published date:** 1995-09-28 _(verified: appears in the quote below)_ > 18689,IS,,ISO 10606:1995,Steel for the reinforcement of concrete — Determination of percentage total elongation at maximum force,Acier à béton pour armatures passives — Détermination de l'allongement total pour cent sous charge maximale,1995-09-28,1,"['91.080.40','77.140.15']",ISO/TC 17/SC 16,9599,,"[28435,28436,28434]","['en','fr']",4,
Specifies two methods for determining the percentage total elongation at maximum force by tensile testing of ordinary reinforcing steel. One method is based on measurement by means of an extensometer during the tensile test. The other method is based on measurement after fracture.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1061:1975 - **Identifier:** ISO 1061:1975 _(verified: appears in the quote below)_ - **Item title:** Plastics — Unplasticized cellulose acetate — Determination of free acidity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1061:1990 - **Withdrawn / published date:** 1975-06-01 _(verified: appears in the quote below)_ > 5552,IS,,ISO 1061:1975,Plastics — Unplasticized cellulose acetate — Determination of free acidity,Matières plastiques — Acétate de cellulose non plastifié — Détermination de l'acidité libre,1975-06-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[5553],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10618:1999 - **Identifier:** ISO 10618:1999 _(verified: appears in the quote below)_ - **Item title:** Carbon fibre — Determination of tensile properties of resin-impregnated yarn _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10618:2004 - **Withdrawn / published date:** 1999-08-19 _(verified: appears in the quote below)_ > 18711,IS,,ISO 10618:1999,Carbon fibre — Determination of tensile properties of resin-impregnated yarn,Fibres de carbone — Détermination des propriétés en traction sur fils imprégnés de résine,1999-08-19,1,['59.100.20'],ISO/TC 61/SC 13,9599,,[33313],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10619-1:2011 - **Identifier:** ISO 10619-1:2011 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10619-1:2017 - **Withdrawn / published date:** 2011-11-24 _(verified: appears in the quote below)_ > 45965,IS,,ISO 10619-1:2011,Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature,Tuyaux et tubes en caoutchouc et en plastique — Mesurage de la flexibilité et de la rigidité — Partie 1: Essais de courbure à température ambiante,2011-11-24,1,['23.040.70'],ISO/TC 45/SC 1,9599,"[25523,32118]",[72845],"['en','fr']",12,"ISO 10619-1:2011 specifies three methods for measuring the flexibility of rubber and plastics hoses and tubing (methods A1, B and C1), where the deformation of the hose or tubing is measured, and two methods for measuring the stiffness (methods A2 and C2) by measuring the force to bend the hose or tubing w Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10619-2:2011 - **Identifier:** ISO 10619-2:2011 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10619-2:2017 - **Withdrawn / published date:** 2011-11-24 _(verified: appears in the quote below)_ > 45942,IS,,ISO 10619-2:2011,Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures,Tuyaux et tubes en caoutchouc et en plastique — Mesurage de la flexibilité et de la rigidité — Partie 2: Essais de courbure à des températures inférieures à l'ambiante,2011-11-24,1,['23.040.70'],ISO/TC 45/SC 1,9599,[23835],[72846],"['en','fr']",9,
ISO 10619-2:2011 specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at sub-ambient temperatures.
Method A is suitable for non-collapsible rubber and p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10619-2:2017 - **Identifier:** ISO 10619-2:2017 _(verified: appears in the quote below)_ - **Item title:** Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10619-2:2021 - **Withdrawn / published date:** 2017-12-05 _(verified: appears in the quote below)_ > 72846,IS,,ISO 10619-2:2017,Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures,Tuyaux et tubes en caoutchouc et en plastique — Mesurage de la flexibilité et de la rigidité — Partie 2: Essais de courbure à des températures inférieures à l'ambiante,2017-12-05,2,['23.040.70'],ISO/TC 45/SC 1,9599,[45942],[75643],"['en','fr']",10,
ISO 10619-2:2017 specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at sub-ambient temperatures.
Method A is suitable for non-collapsible rubber and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10625:1996 - **Identifier:** ISO 10625:1996 _(verified: appears in the quote below)_ - **Item title:** Equipment for crop protection — Sprayer nozzles — Colour coding for identification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10625:2005 - **Withdrawn / published date:** 1996-11-21 _(verified: appears in the quote below)_ > 18717,IS,,ISO 10625:1996,Equipment for crop protection — Sprayer nozzles — Colour coding for identification,Matériel de protection des cultures — Buses de pulvérisation à jet pinceau — Code de couleur pour l'identification,1996-11-21,1,"['01.070','65.060.40']",ISO/TC 23/SC 6,9599,,[37186],"['en','fr']",2,
Specifies the system of colour coding for identification of flat nozzle tips used in equipment for agricultural crop protection.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 10625:1996/Cor 1:1998 - **Identifier:** ISO 10625:1996/Cor 1:1998 _(verified: appears in the quote below)_ - **Item title:** Equipment for crop protection — Sprayer nozzles — Colour coding for identification — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 10625:2005 - **Withdrawn / published date:** 1998-05-28 _(verified: appears in the quote below)_ > 30357,IS,Cor,ISO 10625:1996/Cor 1:1998,Equipment for crop protection — Sprayer nozzles — Colour coding for identification — Technical Corrigendum 1,Matériel de protection des cultures — Buses de pulvérisation à jet pinceau — Code de couleur pour l'identification — Rectificatif technique 1,1998-05-28,1,"['01.070','65.060.40']",ISO/TC 23/SC 6,9599,,[37186],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 10](https://referencesource.org/iso-standard-supersessions/p/10/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 12](https://referencesource.org/iso-standard-supersessions/p/12/) Last verified: 2026-08-05. Review by: 2027-02-02.