ISO 377:2013 specifies requirements for the identification, location and preparation of samples and test pieces intended for mechanical tests on steel sections, bars, rod, flat products and tubular products as defined in ISO 6929. If agreed in the order, ISO 377:2013 can also apply to other metallic products. These samples and test pieces are for use in tests that are Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3770:1976 - **Identifier:** ISO 3770:1976 _(verified: appears in the quote below)_ - **Item title:** Metallic coatings — Copper-accelerated acetic acid salt spray test (CASS test) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9227:1990 - **Withdrawn / published date:** 1976-11-01 _(verified: appears in the quote below)_ > 9290,IS,,ISO 3770:1976,Metallic coatings — Copper-accelerated acetic acid salt spray test (CASS test),Revêtements métalliques — Essai au brouillard salin cupro-acétique (Essai CASS),1976-11-01,1,['25.220.40'],ISO/TC 107/SC 7,9599,,[16859],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3771:1977 - **Identifier:** ISO 3771:1977 _(verified: appears in the quote below)_ - **Item title:** Petroleum products — Total base number — Perchloric acid potentiometric titration method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3771:1994 - **Withdrawn / published date:** 1977-01-01 _(verified: appears in the quote below)_ > 9291,IS,,ISO 3771:1977,Petroleum products — Total base number — Perchloric acid potentiometric titration method,Produits pétroliers — Détermination de l'indice de base total — Méthode par titrage potentiométrique à l'acide perchlorique,1977-01-01,1,['75.080'],ISO/TC 28,9599,,[21736],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3771:1994 - **Identifier:** ISO 3771:1994 _(verified: appears in the quote below)_ - **Item title:** Petroleum products — Determination of base number — Perchloric acid potentiometric titration method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3771:2011 - **Withdrawn / published date:** 1994-08-04 _(verified: appears in the quote below)_ > 21736,IS,,ISO 3771:1994,Petroleum products — Determination of base number — Perchloric acid potentiometric titration method,Produits pétroliers — Détermination de l'indice de base — Méthode par titrage potentiométrique à l'acide perchlorique,1994-08-04,2,['75.080'],ISO/TC 28,9599,[9291],[44771],['en'],8,"
Cancels and replaces the first edition (1977). Establishes a method for the determination of basic constituents in petroleum products by potentiometric titration with perchloric acid in glacial acetic acid. Two variations of the method are described, using different titration solvent volumes and test sample masses. The ranges of base number values for which precision values for the method Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3772:1976 - **Identifier:** ISO 3772:1976 _(verified: appears in the quote below)_ - **Item title:** Photography — Films (in rolls) for phototypesetting and photolettering devices — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3772:1991 - **Withdrawn / published date:** 1976-04-01 _(verified: appears in the quote below)_ > 9292,IS,,ISO 3772:1976,Photography — Films (in rolls) for phototypesetting and photolettering devices — Dimensions,Photographie — Films (en rouleaux) pour appareils de photocomposition et de phototitrage — Dimensions,1976-04-01,1,['37.040.20'],ISO/TC 42,9599,,[9293],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3772:1991 - **Identifier:** ISO 3772:1991 _(verified: appears in the quote below)_ - **Item title:** Photography — Film dimensions — Rolls for photocomposition _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3772:2000 - **Withdrawn / published date:** 1991-06-06 _(verified: appears in the quote below)_ > 9293,IS,,ISO 3772:1991,Photography — Film dimensions — Rolls for photocomposition,Photographie — Dimensions des films — Rouleaux pour appareils de photocomposition,1991-06-06,2,"['37.040.20','37.100.20']",ISO/TC 42,9599,[9292],[28007],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3774:1982 - **Identifier:** ISO 3774:1982 _(verified: appears in the quote below)_ - **Item title:** Cinematography — 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) — Cutting and perforating dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3774:1988 - **Withdrawn / published date:** 1982-02-01 _(verified: appears in the quote below)_ > 9295,IS,,ISO 3774:1982,Cinematography — 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) — Cutting and perforating dimensions,"Cinématographie — Film cinématographique 35 mm perforé 8 mm, type S (1-3-5-7-0) et (1-0) — Dimensions de coupe et de perforation",1982-02-01,2,['37.060.20'],ISO/TC 36,9599,,[9296],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3775:1978 - **Identifier:** ISO 3775:1978 _(verified: appears in the quote below)_ - **Item title:** Cinematography — Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3) — Position and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3775:1990 - **Withdrawn / published date:** 1978-12-01 _(verified: appears in the quote below)_ > 9297,IS,,ISO 3775:1978,Cinematography — Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3) — Position and dimensions,"Cinématographie — Champ d'image de format 8 mm, type S, pour le tirage sur film cinématographique 16 mm perforé 8 mm, type S (1-3) — Position et dimensions",1978-12-01,1,['37.060.20'],ISO/TC 36,9599,,[9298],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3776:1976 - **Identifier:** ISO 3776:1976 _(verified: appears in the quote below)_ - **Item title:** Agricultural tractors — Anchorages for seat belts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3776:1989 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9299,IS,,ISO 3776:1976,Agricultural tractors — Anchorages for seat belts,Tracteurs agricoles — Ancrages pour ceintures de sécurité,1976-09-01,1,['65.060.10'],ISO/TC 23/SC 3,9599,,[9300],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3776:1989 - **Identifier:** ISO 3776:1989 _(verified: appears in the quote below)_ - **Item title:** Tractors for agriculture — Seat belt anchorages _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3776-2:2007 | ISO 3776-1:2006 - **Withdrawn / published date:** 1989-09-21 _(verified: appears in the quote below)_ > 9300,IS,,ISO 3776:1989,Tractors for agriculture — Seat belt anchorages,Tracteurs agricoles — Ancrages pour ceintures de sécurité,1989-09-21,2,['65.060.10'],ISO/TC 23/SC 3,9599,[9299],"[41717,40662]","['en','fr']",3,"
This second edition cancels and replaces the first editon (1976). Specifies the requirements for the location of the anchorages for pelvic restraint belts for operators of tractors fitted with a protective structure, the force that the anchorages shall be capable of withstanding and the tests to which they be subjected. Figures 1 and 2 illustrate details.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3776-2:2007 - **Identifier:** ISO 3776-2:2007 _(verified: appears in the quote below)_ - **Item title:** Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3776-2:2013 - **Withdrawn / published date:** 2007-06-21 _(verified: appears in the quote below)_ > 41717,IS,,ISO 3776-2:2007,Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements,Tracteurs et matériels agricoles — Ceintures de sécurité — Partie 2: Exigences relatives à la résistance des ancrages,2007-06-21,1,['65.060.10'],ISO/TC 23/SC 2,9599,[9300],[53585],"['en','fr']",3,ISO 3776-2:2007 specifies the strength requirements of the anchorages for pelvic restraint (seat) belts intended to be used by the operators of agricultural tractors and self-propelled machinery.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3779:1983 - **Identifier:** ISO 3779:1983 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Vehicle identification number (VIN) — Content and structure _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3779:2009 - **Withdrawn / published date:** 1983-04-01 _(verified: appears in the quote below)_ > 9305,IS,,ISO 3779:1983,Road vehicles — Vehicle identification number (VIN) — Content and structure,Véhicules routiers — Numéro d'identification des véhicules (VIN) — Contenu et structure,1983-04-01,3,['43.020'],ISO/TC 22,9599,,[52200],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 378:1980 - **Identifier:** ISO 378:1980 _(verified: appears in the quote below)_ - **Item title:** Gymnastic equipment — Parallel bars _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 378 - **Withdrawn / published date:** 1980-09-01 _(verified: appears in the quote below)_ > 4359,IS,,ISO 378:1980,Gymnastic equipment — Parallel bars,Engins de gymnastique — Barres parallèles,1980-09-01,1,['97.220.30'],ISO/TC 83,9599,,[61467],"['en','fr']",3,"Specifies the functional and safety requirements for parallel bars for use in competition and training, in order to permit a true comparison of performance. Lays down dimensions, material, execution and design.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3780:1983 - **Identifier:** ISO 3780:1983 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — World manufacturer identifier (WMI) code _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3780:2009 - **Withdrawn / published date:** 1983-04-01 _(verified: appears in the quote below)_ > 9306,IS,,ISO 3780:1983,Road vehicles — World manufacturer identifier (WMI) code,Véhicules routiers — Code d'identification mondiale des constructeurs (WMI),1983-04-01,2,['43.020'],ISO/TC 22,9599,,[45844],"['en','fr']",2,"Specifies the content and structure of an identifier in order to establish, on a world-wide basis, the identification of road vehicle manufacturers. This identifier is the first section of the vehicle identification number (VIN) described in ISO 3779. Applies to motor vehicles, trailers, motorcycles, and mopeds as defined in ISO 3833. This second edition cancels and replaces the first edition (1976).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3781:1983 - **Identifier:** ISO 3781:1983 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of tensile strength after immersion in water _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3781:2011 - **Withdrawn / published date:** 1983-06-01 _(verified: appears in the quote below)_ > 9307,IS,,ISO 3781:1983,Paper and board — Determination of tensile strength after immersion in water,Papier et carton — Détermination de la résistance à la traction après immersion dans l'eau,1983-06-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[56090],"['en','fr']",4,"Is applicable to board as well as to paper, provided that an apropriate soaking time is agreed between the interested parties. Sampling shall be according to ISO 186, conditioning according to ISO 187 and the determination of tensile strength according to ISO 536.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3783:1980 - **Identifier:** ISO 3783:1980 _(verified: appears in the quote below)_ - **Item title:** Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Electric model) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/CD 3783 | ISO 3783:2006 - **Withdrawn / published date:** 1980-02-01 _(verified: appears in the quote below)_ > 9309,IS,,ISO 3783:1980,Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Electric model),Papier et carton — Détermination de la résistance à l'arrachage — Méthode d'impression à vitesse accélérée avec l'appareil IGT (modèle électrique),1980-02-01,1,['85.060'],ISO/TC 6/SC 2,9599,,"[1340,31695]","['en','fr']",7,"Specifies a method of operating the electrical model of the IGT printability tester in order to provide a measure of the picking resistance of paper, and applies to any kind of paper or board likely to be used for printing, mainly by lithographic or letterpress process.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3785:1976 - **Identifier:** ISO 3785:1976 _(verified: appears in the quote below)_ - **Item title:** Steel — Designation of test piece axes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 3785 | ISO 3785:2006 - **Withdrawn / published date:** 1976-12-01 _(verified: appears in the quote below)_ > 9311,IS,,ISO 3785:1976,Steel — Designation of test piece axes,Acier — Désignation des axes des éprouvettes,1976-12-01,1,['77.040.10'],ISO/TC 164/SC 4,9599,,"[23915,35304]","['en','fr']",6,"Specifies a method for the identification of test piece axes in relation to the grain flow, by means of a system of co-ordinates. Applies to both unnotched metal test pieces. The system present is only intended to be applied in situations where a uniform grain flow can be unambiguously indentified (see also 4.2 and the annex).
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3785:2006 - **Identifier:** ISO 3785:2006 _(verified: appears in the quote below)_ - **Item title:** Metallic materials — Designation of test specimen axes in relation to product texture _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3785:2023 - **Withdrawn / published date:** 2006-01-30 _(verified: appears in the quote below)_ > 35304,IS,,ISO 3785:2006,Metallic materials — Designation of test specimen axes in relation to product texture,Matériaux métalliques — Désignation des axes des éprouvettes en relation avec la texture du produit,2006-01-30,2,['77.040.10'],ISO/TC 164/SC 4,9599,[9311],[82165],"['en','fr']",7,ISO 3785:2006 specifies a method for designating test specimen axes in relation to product texture by means of an X-Y-Z orthogonal coordinate system.
The system applies equally to unnotched and notched (or precracked) test specimens.
The method is intended only for metallic materials with uniform texture that can be unambiguously determined.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3787:1976 - **Identifier:** ISO 3787:1976 _(verified: appears in the quote below)_ - **Item title:** Wood — Test methods — Determination of ultimate stress in compression parallel to grain _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13061-17:2017 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9313,IS,,ISO 3787:1976,Wood — Test methods — Determination of ultimate stress in compression parallel to grain,Bois — Méthodes d'essai — Détermination de la contrainte de rupture en compression parallèle aux fibres,1976-09-01,1,['79.040'],ISO/TC 218,9599,,[60079],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3788:1976 - **Identifier:** ISO 3788:1976 _(verified: appears in the quote below)_ - **Item title:** Information processing — 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 63 rpmm (1 600 rpi), phase encoded _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/IEC 3788:1990 - **Withdrawn / published date:** 1976-10-01 _(verified: appears in the quote below)_ > 9314,IS,,ISO 3788:1976,"Information processing — 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 63 rpmm (1 600 rpi), phase encoded","Traitement de l'information — Bande magnétique, à 9 pistes, de 12,7 mm (0,5 in) de large, pour l'échange d'information, enregistrée à 63 rangées par millimètre (1 600 rpi) par codage de phase",1976-10-01,1,['35.220.22'],ISO/IEC JTC 1,9599,,[9315],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3789-1:1982 - **Identifier:** ISO 3789-1:1982 _(verified: appears in the quote below)_ - **Item title:** Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 1: Common controls _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 15077:2002 - **Withdrawn / published date:** 1982-08-01 _(verified: appears in the quote below)_ > 9317,IS,,ISO 3789-1:1982,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 1: Common controls","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Emplacement et mode de fonctionnement des commandes de l'opérateur — Partie 1: Commandes communes",1982-08-01,1,['65.060.01'],ISO/TC 23/SC 14,9599,[9316],[36685],"['en','fr']",4,"Specifies the type, location and method of operation (including direction of motion) of controls. The controls are divided into two categories: - ride-on machinery; -pedestrian-operated machines. The controls included in this part ar Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3789:1976 - **Identifier:** ISO 3789:1976 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 3789-1976 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3789-3:1989 | ISO 3789-1:1982 | ISO 3789-2:1982 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9316,IS,,ISO 3789:1976,Withdrawal of ISO 3789-1976,Annulation de l'ISO 3789-1976,1976-09-01,1,['65.060.01'],ISO/TC 23/SC 14,9599,,"[9320,9317,9318]","['en','fr']",8, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3789-2:1982 - **Identifier:** ISO 3789-2:1982 _(verified: appears in the quote below)_ - **Item title:** Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 2: Controls for agricultural tractors and machinery _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 15077:2002 - **Withdrawn / published date:** 1982-08-01 _(verified: appears in the quote below)_ > 9318,IS,,ISO 3789-2:1982,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 2: Controls for agricultural tractors and machinery","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Emplacement et mode de fonctionnement des commandes de l'opérateur — Partie 2: Commandes pour tracteurs et matériels agricoles",1982-08-01,1,['65.060.01'],ISO/TC 23/SC 14,9599,[9316],[36685],"['en','fr']",7,"
Specifies the type, location and method of operation (including direction of motion) of controls. The controls are divided into two categories: - ride-on machinery; - pede Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3789-3:1982 - **Identifier:** ISO 3789-3:1982 _(verified: appears in the quote below)_ - **Item title:** Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 3: Controls for powered lawn and garden equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3789-3:1989 - **Withdrawn / published date:** 1982-08-01 _(verified: appears in the quote below)_ > 9319,IS,,ISO 3789-3:1982,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 3: Controls for powered lawn and garden equipment","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Emplacement et mode de fonctionnement des commandes de l'opérateur — Partie 3: Commandes pour matériel à moteur pour jardins et pelouses",1982-08-01,1,['65.060.01'],ISO/TC 23/SC 14,9599,,[9320],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3789-3:1989 - **Identifier:** ISO 3789-3:1989 _(verified: appears in the quote below)_ - **Item title:** Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 3: Controls for powered lawn and garden equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/TS 15079:2001 - **Withdrawn / published date:** 1989-11-30 _(verified: appears in the quote below)_ > 9320,IS,,ISO 3789-3:1989,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 3: Controls for powered lawn and garden equipment","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Emplacement et mode de fonctionnement des commande de l'opérateur — Partie 3: Commandes pour matériel à moteur pour jardins et pelouses",1989-11-30,2,['65.060.70'],ISO/TC 23/SC 14,9599,"[9319,9316]",[26395],"['en','fr']",6,"
This second edition cancels and replaces the first edition (1982). Specifies the type, location and method of operation (including direction of motion) of co Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3789-4:1989 - **Identifier:** ISO 3789-4:1989 _(verified: appears in the quote below)_ - **Item title:** Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 4: Controls for forestry log loaders _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 15078:1998 - **Withdrawn / published date:** 1989-06-29 _(verified: appears in the quote below)_ > 9321,IS,,ISO 3789-4:1989,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 4: Controls for forestry log loaders","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Emplacement et mode de fonctionnement des commandes de l'opérateur — Partie 4: Commandes pour chargeurs de grumes forestiers",1989-06-29,1,['65.060.80'],ISO/TC 23/SC 14,9599,,[26394],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 379:1980 - **Identifier:** ISO 379:1980 _(verified: appears in the quote below)_ - **Item title:** Gymnastic equipment — Horizontal bar _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 379 - **Withdrawn / published date:** 1980-10-01 _(verified: appears in the quote below)_ > 4360,IS,,ISO 379:1980,Gymnastic equipment — Horizontal bar,Engins de gymnastique — Barre fixe,1980-10-01,1,['97.220.30'],ISO/TC 83,9599,,[61493],"['en','fr']",2,"
Specifies the functional and safety requirements for horizontal bars for use in competition and training, in order to permit a true comparison of performance. Lays down dimensions, material, execution and design.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3795:1976 - **Identifier:** ISO 3795:1976 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Determination of burning behaviour of interior materials for motor vehicles _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3795:1989 - **Withdrawn / published date:** 1976-08-01 _(verified: appears in the quote below)_ > 9327,IS,,ISO 3795:1976,Road vehicles — Determination of burning behaviour of interior materials for motor vehicles,Véhicules routiers — Détermination des caractéristiques de combustion des matériaux intérieurs des automobiles,1976-08-01,1,"['13.220.40','43.020']",ISO/TC 22,9599,,[9328],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3796:1976 - **Identifier:** ISO 3796:1976 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Clear openings through frames for external single-leaf doors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3796:1999 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9329,IS,,ISO 3796:1976,Shipbuilding — Clear openings through frames for external single-leaf doors,Construction navale — Clairs (ouvertures libres dans les dormants) pour les portes extérieures à un seul battant,1976-09-01,1,['47.020.10'],ISO/TC 8/SC 8,9599,,[26572],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3796:1999 - **Identifier:** ISO 3796:1999 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Clear openings for external single-leaf doors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3796:2023 - **Withdrawn / published date:** 1999-10-28 _(verified: appears in the quote below)_ > 26572,IS,,ISO 3796:1999,Ships and marine technology — Clear openings for external single-leaf doors,Navires et technologie maritime — Ouvertures libres pour les portes extérieures à un seul battant,1999-10-28,2,['47.020.10'],ISO/TC 8/SC 8,9599,[9329],[84541],['en'],2,"This International Standard lays down standardized dimensions of clear openings for all types of external singleleaf
doors, on board ships, for which coamings are required.
These dimensions shall be used as nominal sizes for these doors of ships.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3797:1976 - **Identifier:** ISO 3797:1976 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Vertical steel ladders _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3797:2023 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9330,IS,,ISO 3797:1976,Shipbuilding — Vertical steel ladders,Construction navale — Échelles verticales en acier,1976-09-01,1,['47.020.50'],ISO/TC 8/SC 8,9599,,[84129],"['en','fr']",2,"Specifies the main dimensions and characteristics for the concerned ladders to be fitted on board ships in small holds, between deck spaces, on masts, kingposts, trunks, deck-house tops, maintenance platforms and for similar applications.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3800-1:1977 - **Identifier:** ISO 3800-1:1977 _(verified: appears in the quote below)_ - **Item title:** Threaded fasteners — Axial load fatigue testing — Part 1: Test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3800:1993 - **Withdrawn / published date:** 1977-05-01 _(verified: appears in the quote below)_ > 9334,IS,,ISO 3800-1:1977,Threaded fasteners — Axial load fatigue testing — Part 1: Test methods,Éléments de fixation filetés — Essais de fatigue sous charge axiale — Partie 1: Méthodes d'essai,1977-05-01,1,['21.060'],ISO/TC 2,9599,,[9333],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3803:1976 - **Identifier:** ISO 3803:1976 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Hydraulic pressure test connection for braking equipment _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3803:1984 - **Withdrawn / published date:** 1976-02-01 _(verified: appears in the quote below)_ > 9337,IS,,ISO 3803:1976,Road vehicles — Hydraulic pressure test connection for braking equipment,Véhicules routiers — Prise de pression pour installation de freinage hydraulique,1976-02-01,1,['43.040.40'],ISO/TC 22,9599,,[9338],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3804:1977 - **Identifier:** ISO 3804:1977 _(verified: appears in the quote below)_ - **Item title:** Plywood — Determination of dimensions of test pieces _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9424:1989 - **Withdrawn / published date:** 1977-01-01 _(verified: appears in the quote below)_ > 9339,IS,,ISO 3804:1977,Plywood — Determination of dimensions of test pieces,Contreplaqué — Détermination des dimensions des éprouvettes,1977-01-01,1,['79.060.10'],ISO/TC 89,9599,,[17125],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3805:1977 - **Identifier:** ISO 3805:1977 _(verified: appears in the quote below)_ - **Item title:** Plywood — Determination of density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9427:1989 - **Withdrawn / published date:** 1977-01-01 _(verified: appears in the quote below)_ > 9340,IS,,ISO 3805:1977,Plywood — Determination of density,Contreplaqué — Détermination de la masse volumique,1977-01-01,1,['79.060.10'],ISO/TC 89,9599,,[17129],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3806:1977 - **Identifier:** ISO 3806:1977 _(verified: appears in the quote below)_ - **Item title:** Plywood — Determination of moisture content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9425:1989 - **Withdrawn / published date:** 1977-01-01 _(verified: appears in the quote below)_ > 9341,IS,,ISO 3806:1977,Plywood — Determination of moisture content,Contreplaqué — Détermination de l'humidité,1977-01-01,1,['79.060.10'],ISO/TC 89,9599,,[17126],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3807-1:2000 - **Identifier:** ISO 3807-1:2000 _(verified: appears in the quote below)_ - **Item title:** Cylinders for acetylene — Basic requirements — Part 1: Cylinders without fusible plugs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 3807-1 | ISO 3807:2013 - **Withdrawn / published date:** 2000-03-16 _(verified: appears in the quote below)_ > 27621,IS,,ISO 3807-1:2000,Cylinders for acetylene — Basic requirements — Part 1: Cylinders without fusible plugs,Bouteilles d'acétylène — Prescriptions fondamentales — Partie 1: Bouteilles sans bouchons fusibles,2000-03-16,1,['23.020.35'],ISO/TC 58,9599,[9342],"[54414,59667]","['en','fr']",22, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3807:1977 - **Identifier:** ISO 3807:1977 _(verified: appears in the quote below)_ - **Item title:** Dissolved acetylene cylinders — Basic requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3807-2:2000 | ISO/WD 3807 | ISO 3807-1:2000 - **Withdrawn / published date:** 1977-05-01 _(verified: appears in the quote below)_ > 9342,IS,,ISO 3807:1977,Dissolved acetylene cylinders — Basic requirements,Bouteilles d'acétylène dissous — Conditions requises,1977-05-01,1,['23.020.35'],ISO/TC 58,9599,,"[27622,24949,27621]","['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3807-2:2000 - **Identifier:** ISO 3807-2:2000 _(verified: appears in the quote below)_ - **Item title:** Cylinders for acetylene — Basic requirements — Part 2: Cylinders with fusible plugs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 3807-2 | ISO 3807:2013 - **Withdrawn / published date:** 2000-03-16 _(verified: appears in the quote below)_ > 27622,IS,,ISO 3807-2:2000,Cylinders for acetylene — Basic requirements — Part 2: Cylinders with fusible plugs,Bouteilles d'acétylène — Prescriptions fondamentales — Partie 2: Bouteilles avec bouchons fusibles,2000-03-16,1,['23.020.35'],ISO/TC 58,9599,[9342],"[54415,59667]","['en','fr']",28, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3808-1:1979 - **Identifier:** ISO 3808-1:1979 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Unscreened high-tension ignition cables — Part 1: Dimensions, general requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3808:2002 - **Withdrawn / published date:** 1979-10-01 _(verified: appears in the quote below)_ > 9343,IS,,ISO 3808-1:1979,"Road vehicles — Unscreened high-tension ignition cables — Part 1: Dimensions, general requirements and test methods","Véhicules routiers — Câbles d'allumage haute tension non blindés — Partie 1: Dimensions, spécifications générales et méthodes d'essai",1979-10-01,1,['43.060.50'],ISO/TC 22,9599,,[26261],"['en','fr']",8,"Applies to all types of unscreened high-tension ignition cables used in automotive vehicles. Describes tests for: insulation faults, 30 minute test voltage and breakdown voltage, capacity, resistance to corona effect, pressure at high temperature, thermal overload, shrinkage by heat, resistance to flame propagation, flexibility at low temperature, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3808-2:1980 - **Identifier:** ISO 3808-2:1980 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Unscreened high-tension ignition cables — Part 2: Cable classes, types, applicable tests and special requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3808:2002 - **Withdrawn / published date:** 1980-09-01 _(verified: appears in the quote below)_ > 9344,IS,,ISO 3808-2:1980,"Road vehicles — Unscreened high-tension ignition cables — Part 2: Cable classes, types, applicable tests and special requirements","Véhicules routiers — Câbles d'allumage haute tension non blindés — Partie 2: Classes de câble, types, essais applicables et spécifications particulières",1980-09-01,1,['43.060.50'],ISO/TC 22,9599,,[26261],"['en','fr']",3,"
Applies to all types of unscreened high-tension ignition cables used in automotive vehicles. Tabulates cable classes (A to F), types (1 to 4), applicable tests and special requirements together with the general requirements and test methods which are specified in ISO 3808-1.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3808-2:1980/Amd 1:1985 - **Identifier:** ISO 3808-2:1980/Amd 1:1985 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Unscreened high-tension ignition cables — Part 2: Cable classes, types, applicable tests and special requirements — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3808:2002 - **Withdrawn / published date:** 1985-08-22 _(verified: appears in the quote below)_ > 9345,IS,Amd,ISO 3808-2:1980/Amd 1:1985,"Road vehicles — Unscreened high-tension ignition cables — Part 2: Cable classes, types, applicable tests and special requirements — Amendment 1","Véhicules routiers — Câbles d'allumage haute tension non blindés — Partie 2: Classes de câble, types, essais applicables et spécifications particulières — Amendement 1",1985-08-22,1,['43.060.50'],ISO/TC 22,9599,,[26261],"['en','fr']",1,"Applies to all types of unscreened high-tension ignition cables used in automotive vehicles. Page 2, table, test 5.7 Shrinkage by heat. In the columns for classes A and B, replace the given test temperature of 155 ±2 °C by 150 ±2 °C.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3809:1976 - **Identifier:** ISO 3809:1976 _(verified: appears in the quote below)_ - **Item title:** Oil of lime (obtained by expression of the whole fruit) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3809:1987 - **Withdrawn / published date:** 1976-08-01 _(verified: appears in the quote below)_ > 9346,IS,,ISO 3809:1976,Oil of lime (obtained by expression of the whole fruit),Huile essentielle de lime (obtenue par expression du fruit entier),1976-08-01,1,['71.100.60'],ISO/TC 54,9599,,[9347],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3809:1987 - **Identifier:** ISO 3809:1987 _(verified: appears in the quote below)_ - **Item title:** Oil of lime, Mexico (Citrus aurantiifolia (Christmann) Swingle) obtained by mechanical means _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3809:2004 - **Withdrawn / published date:** 1987-06-18 _(verified: appears in the quote below)_ > 9347,IS,,ISO 3809:1987,"Oil of lime, Mexico (Citrus aurantiifolia (Christmann) Swingle) obtained by mechanical means","Huile essentielle de lime, Mexique (Citrus aurantiifolia (Christmann) Swingle) obtenue par des procédés mécaniques",1987-06-18,2,['71.100.60'],ISO/TC 54,9599,[9346],[28588],"['en','fr']",5,In the Standard two types of oil are distinguished. Typ A is obtained by centrifuging the emulsion of juice and oil obtained by crushing the whole fruits. Typ B is produced by centrifuging the emulsion of water and oil obtained by grating the fruits under water spraying. In a table the requirements for the characteristics of the two types of the oil are listed.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3810:1977 - **Identifier:** ISO 3810:1977 _(verified: appears in the quote below)_ - **Item title:** Cork — Floor tiles of agglomerated cork — Methods of test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3810:1987 - **Withdrawn / published date:** 1977-02-01 _(verified: appears in the quote below)_ > 9348,IS,,ISO 3810:1977,Cork — Floor tiles of agglomerated cork — Methods of test,Liège — Dalles d'aggloméré pour revêtements de sol — Méthodes d'essai,1977-02-01,1,"['79.080','79.100']",ISO/TC 87,9599,,[9349],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3811:1979 - **Identifier:** ISO 3811:1979 _(verified: appears in the quote below)_ - **Item title:** Meat and meat products — Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli — (Reference method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 7251:2005 | ISO 4831:2006 | ISO/DIS 3811 | ISO 4832:2006 - **Withdrawn / published date:** 1979-11-01 _(verified: appears in the quote below)_ > 9352,IS,,ISO 3811:1979,Meat and meat products — Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli — (Reference method),Viande et produits à base de viande — Recherche et dénombrement des bactéries présumées coliformes et présumées Escherichia coli — (Méthode de référence),1979-11-01,1,['07.100.30'],ISO/TC 34/SC 6,9599,,"[34568,38280,20848,38282]","['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3813:1977 - **Identifier:** ISO 3813:1977 _(verified: appears in the quote below)_ - **Item title:** Cork — Floor tiles of agglomerated cork — Characteristics, sampling and packing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3813:1987 - **Withdrawn / published date:** 1977-03-01 _(verified: appears in the quote below)_ > 9355,IS,,ISO 3813:1977,"Cork — Floor tiles of agglomerated cork — Characteristics, sampling and packing","Liège — Dalles d'aggloméré pour revêtement des sols — Caractéristiques, échantillonnage et emballage",1977-03-01,1,"['79.080','79.100']",ISO/TC 87,9599,,[9356],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3813:1987 - **Identifier:** ISO 3813:1987 _(verified: appears in the quote below)_ - **Item title:** Floor tiles of agglomerated cork — Characteristics, sampling and packing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3813:2004 - **Withdrawn / published date:** 1987-05-07 _(verified: appears in the quote below)_ > 9356,IS,,ISO 3813:1987,"Floor tiles of agglomerated cork — Characteristics, sampling and packing","Dalles d'aggloméré de liège pour revêtement des sols — Caractéristiques, échantillonnage et emballage",1987-05-07,2,"['79.080','79.100']",ISO/TC 87,9599,[9355],[38158],"['en','fr']",2,This standard applies to tiles without surface covering. Gives the maximum permissible deviations in characteristics measured and determined in accordance with ISO 3810. Clauses 4 and 5 of the first edition have been technically revised.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3813:2004 - **Identifier:** ISO 3813:2004 _(verified: appears in the quote below)_ - **Item title:** Resilient floor coverings — Cork floor tiles — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 3813 - **Withdrawn / published date:** 2004-04-07 _(verified: appears in the quote below)_ > 38158,IS,,ISO 3813:2004,Resilient floor coverings — Cork floor tiles — Specification,Revêtements de sol résilients — Dalles en aggloméré de liège — Spécification,2004-04-07,3,['79.100'],ISO/TC 87,9599,[9356],[65026],"['en','fr']",6,ISO 3813:2004 specifies the requirements for cork floor coverings made from agglomerated composition cork supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3815:1976 - **Identifier:** ISO 3815:1976 _(verified: appears in the quote below)_ - **Item title:** Zinc and zinc alloys — Spectrographic analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3815-1:2005 | ISO 3815-2:2005 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9359,IS,,ISO 3815:1976,Zinc and zinc alloys — Spectrographic analysis,Zinc et alliages de zinc — Analyse spectrale d'émission,1976-09-01,1,['77.120.60'],ISO/TC 18,9599,,"[36189,35592]","['en','fr']",5,Specifies the objective criteria which make it possible to assess the value of the results obtained in each particular case. It is not intended to prescribe a type of apparatus or a procedure for converting the instrument response to concentrations units because of the broad range of equipment available and the difficulty of completely specifying all working conditions in a spectrographic installation. The spectrographic analysis shall be carried out on solid metallic samples that should ref Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3816:1976 - **Identifier:** ISO 3816:1976 _(verified: appears in the quote below)_ - **Item title:** Zinc ingots — Selection and preparation of samples for spectrographic analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 20081:2005 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9360,IS,,ISO 3816:1976,Zinc ingots — Selection and preparation of samples for spectrographic analysis,Zinc en lingots — Prélèvement et préparation des échantillons pour l'analyse spectrale d'émission,1976-09-01,1,['77.120.60'],ISO/TC 18,9599,,[35285],"['en','fr']",2,"
Sampling may be carried out either by drilling or by sawing slices. Both methods of sampling provide a sample for possible analyses by other standardized methods. ISO 3816 applies only to samples from zinc ingots. Alternatively, the interested parties may agree to select samples of zinc in the liquid state during production.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3817:1976 - **Identifier:** ISO 3817:1976 _(verified: appears in the quote below)_ - **Item title:** Zinc alloy ingots — Selection and preparation of samples for spectrographic analysis _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 20081:2005 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9361,IS,,ISO 3817:1976,Zinc alloy ingots — Selection and preparation of samples for spectrographic analysis,Alliages de zinc en lingots — Prélèvement et préparation des échantillons pour l'analyse spectrale d'émission,1976-09-01,1,['77.120.60'],ISO/TC 18,9599,,[35285],"['en','fr']",2,"Sampling may be carried out either by drilling or by sawing slices. Both methods of sampling provide a sample for possible analyses by other standardized methods. Applies only to samples from zinc alloy ingots. Alternatively, the interested parties may agree to select samples of zinc alloy in the liquid state during production.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3819:1985 - **Identifier:** ISO 3819:1985 _(verified: appears in the quote below)_ - **Item title:** Laboratory glassware — Beakers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3819:2015 - **Withdrawn / published date:** 1985-11-28 _(verified: appears in the quote below)_ > 9363,IS,,ISO 3819:1985,Laboratory glassware — Beakers,Verrerie de laboratoire — Béchers,1985-11-28,1,['17.060'],ISO/TC 48,9599,,[63919],"['en','fr']",2,"The dimensions specified are close to average dimensions of current production in most manufactering countries. The types of beakers are specified: a low-form beaker with spout an a tall-form beaker with spout. The nominal capacities, the material and the construction are described. The basic dimensions are tabulated and the incriptions are defined.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3821:1977 - **Identifier:** ISO 3821:1977 _(verified: appears in the quote below)_ - **Item title:** Welding — Flexible hoses for gas welding and allied processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3821:1992 - **Withdrawn / published date:** 1977-08-01 _(verified: appears in the quote below)_ > 9365,IS,,ISO 3821:1977,Welding — Flexible hoses for gas welding and allied processes,Soudage — Tuyaux souples pour soudage aux gaz et techniques connexes,1977-08-01,1,"['83.140.40','25.160.30']",ISO/TC 44,9599,,[9366],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3821:1992 - **Identifier:** ISO 3821:1992 _(verified: appears in the quote below)_ - **Item title:** Welding — Rubber hoses for welding, cutting and allied processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3821:1998 - **Withdrawn / published date:** 1992-09-17 _(verified: appears in the quote below)_ > 9366,IS,,ISO 3821:1992,"Welding — Rubber hoses for welding, cutting and allied processes","Soudage — Tuyaux souples en caoutchouc pour le soudage, le coupage et techniques connexes",1992-09-17,2,"['83.140.40','25.160.30']",ISO/TC 44/SC 8,9599,[9365],[28763],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3821:1998 - **Identifier:** ISO 3821:1998 _(verified: appears in the quote below)_ - **Item title:** Gas welding equipment — Rubber hoses for welding, cutting and allied processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3821:2008 - **Withdrawn / published date:** 1998-10-29 _(verified: appears in the quote below)_ > 28763,IS,,ISO 3821:1998,"Gas welding equipment — Rubber hoses for welding, cutting and allied processes","Matériel de soudage aux gaz — Tuyaux souples en caoutchouc pour le soudage, le coupage et techniques connexes",1998-10-29,3,"['83.140.40','25.160.30']",ISO/TC 44/SC 8,9599,[9366],[40642],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3821:2008 - **Identifier:** ISO 3821:2008 _(verified: appears in the quote below)_ - **Item title:** Gas welding equipment — Rubber hoses for welding, cutting and allied processes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3821:2019 | ISO/FDIS 3821 - **Withdrawn / published date:** 2008-10-02 _(verified: appears in the quote below)_ > 40642,IS,,ISO 3821:2008,"Gas welding equipment — Rubber hoses for welding, cutting and allied processes","Matériel de soudage aux gaz — Tuyaux souples en caoutchouc pour le soudage, le coupage et les techniques connexes",2008-10-02,4,"['83.140.40','25.160.30']",ISO/TC 44/SC 8,9599,[28763],"[75660,67312]","['en','fr']",16,"ISO 3821:2008 specifies requirements for rubber hoses (including twin hoses) for welding, cutting and allied processes.
ISO 3821:2008 specifies requirements for rubber hoses for normal duty of 2 MPa (20 bar) and light duty [limited to hoses for maximum working pressure of 1 MPa (10 bar) and with bore up to and including 6,3 mm].
ISO 3821:2008 applies to hoses Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3822-1:1983 - **Identifier:** ISO 3822-1:1983 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3822-1:1999 - **Withdrawn / published date:** 1983-12-01 _(verified: appears in the quote below)_ > 9367,IS,,ISO 3822-1:1983,Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement,Acoustique — Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau — Partie 1: Méthode de mesurage,1983-12-01,2,"['91.140.60','17.140.20']",ISO/TC 43/SC 2,9599,,[22121],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3822-2:1984 - **Identifier:** ISO 3822-2:1984 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3822-2:1995 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 9368,IS,,ISO 3822-2:1984,Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps,Acoustique — Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau — Partie 2: Conditions de montage et de fonctionnement des robinets de puisage,1984-12-01,1,"['91.140.60','17.140.20']",ISO/TC 43/SC 2,9599,,[22122],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3822-3:1984 - **Identifier:** ISO 3822-3:1984 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3822-3:1997 - **Withdrawn / published date:** 1984-12-01 _(verified: appears in the quote below)_ > 9369,IS,,ISO 3822-3:1984,Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances,Acoustique — Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau — Partie 3: Conditions de montage et de fonctionnement des robinetteries et des équipements hydrauliques en ligne,1984-12-01,1,"['91.140.60','17.140.20']",ISO/TC 43/SC 2,9599,,[22123],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3822-3:1997 - **Identifier:** ISO 3822-3:1997 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3822-3:2018 - **Withdrawn / published date:** 1997-02-13 _(verified: appears in the quote below)_ > 22123,IS,,ISO 3822-3:1997,Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances,Acoustique — Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau — Partie 3: Conditions de montage et de fonctionnement des robinetteries et des équipements hydrauliques en ligne,1997-02-13,2,"['17.140.20','91.140.60']",ISO/TC 43/SC 2,9599,[9369],[69868],"['en','fr']",8,"
Gives the mounting and operating conditions to be used for in-line valves and appliances, which control the flow, p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3822-3:1997/Amd 1:2009 - **Identifier:** ISO 3822-3:1997/Amd 1:2009 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3822-3:2018 - **Withdrawn / published date:** 2009-10-21 _(verified: appears in the quote below)_ > 51971,IS,Amd,ISO 3822-3:1997/Amd 1:2009,Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances — Amendment 1,Acoustique — Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau — Partie 3: Conditions de montage et de fonctionnement des robinetteries et des équipements hydrauliques en ligne — Amendement 1,2009-10-21,2,"['17.140.20','91.140.60']",ISO/TC 43/SC 2,9599,,[69868],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3822-4:1985 - **Identifier:** ISO 3822-4:1985 _(verified: appears in the quote below)_ - **Item title:** Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3822-4:1997 - **Withdrawn / published date:** 1985-10-24 _(verified: appears in the quote below)_ > 9370,IS,,ISO 3822-4:1985,Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances,Acoustique — Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau — Partie 4: Conditions de montage et de fonctionnement des équipements spéciaux,1985-10-24,1,"['17.140.20','91.140.60']",ISO/TC 43/SC 2,9599,,[22124],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3823-1:1986 - **Identifier:** ISO 3823-1:1986 _(verified: appears in the quote below)_ - **Item title:** Dental rotary instruments — Part 1: Steel and carbide burs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3823-1:1997 - **Withdrawn / published date:** 1986-02-20 _(verified: appears in the quote below)_ > 9371,IS,,ISO 3823-1:1986,Dental rotary instruments — Part 1: Steel and carbide burs,Instruments rotatifs dentaires — Partie 1: Fraises en acier et carbure,1986-02-20,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[19990],"['en','fr']",13, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3823-2:1986 - **Identifier:** ISO 3823-2:1986 _(verified: appears in the quote below)_ - **Item title:** Dental rotary instruments — Part 2: Steel and carbide finishing burs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3823-2:2003 - **Withdrawn / published date:** 1986-02-20 _(verified: appears in the quote below)_ > 9372,IS,,ISO 3823-2:1986,Dental rotary instruments — Part 2: Steel and carbide finishing burs,Instruments rotatifs dentaires — Partie 2: Fraises à finir en acier et carbure,1986-02-20,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[30891],"['en','fr']",14,"
Specification of dimensions of and requirements for the twelfe most commonly used forms of steel and carbide finishing burs to ensure the interchangeability of these instruments. Other characteristics of bur heaeds, for example spiralled blades or cross-cut, are not covered by this standard. Attention is drawn to the number coding system of ISO 6360 which specifies a 15 digit number for identification of dental rotary instruments of all types. 9373,IS,,ISO 3824:1977,Dental silicophosphate cement (hand-mixed),Ciments dentaires aux silicophosphates (mélangés à la main),1977-02-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[9374],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3824:1984 - **Identifier:** ISO 3824:1984 _(verified: appears in the quote below)_ - **Item title:** Dental silicophosphate cement (hand-mixed) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9917:1991 - **Withdrawn / published date:** 1984-05-01 _(verified: appears in the quote below)_ > 9374,IS,,ISO 3824:1984,Dental silicophosphate cement (hand-mixed),Ciments dentaires aux silicophosphates (mélange manuel),1984-05-01,2,['11.060.10'],ISO/TC 106/SC 1,9599,[9373],[17800],"['en','fr']",30, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3826-1:2003 - **Identifier:** ISO 3826-1:2003 _(verified: appears in the quote below)_ - **Item title:** Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3826-1:2013 - **Withdrawn / published date:** 2003-11-13 _(verified: appears in the quote below)_ > 37720,IS,,ISO 3826-1:2003,Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers,Poches en plastique souple pour le sang et les composants du sang — Partie 1: Poches conventionnelles,2003-11-13,1,['11.040.20'],ISO/TC 76,9599,"[9376,28159]",[56075],"['en','fr']",20,"
ISO 3826-1:2003 specifies requirements, including performance requirements, for plastics collapsible, non-vented, sterile containers complete with collecting tube outlet port(s), integral needle and with optional transfer tube(s), for the collection, storage, processing, transport, separation and administration of blood and blood components. The plastics containers may contain ant Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3826-1:2013 - **Identifier:** ISO 3826-1:2013 _(verified: appears in the quote below)_ - **Item title:** Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3826-1:2019 - **Withdrawn / published date:** 2013-05-16 _(verified: appears in the quote below)_ > 56075,IS,,ISO 3826-1:2013,Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers,Poches en plastique souple pour le sang et les composants du sang — Partie 1: Poches conventionnelles,2013-05-16,2,['11.040.20'],ISO/TC 76,9599,[37720],[70726],"['en','fr']",23,"
ISO 3826-1:2013 specifies requirements, including performance requirements, for plastics collapsible, non-vented, sterile containers complete with collecting tube outlet port(s), integral needle, and with optional transfer tube(s), for the collection, storage, processing, transport, separation, and administration of blood and blood components. The plastics containers may contain anticoag Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3826:1993 - **Identifier:** ISO 3826:1993 _(verified: appears in the quote below)_ - **Item title:** Plastics collapsible containers for human blood and blood components _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3826-1:2003 - **Withdrawn / published date:** 1993-03-04 _(verified: appears in the quote below)_ > 9376,IS,,ISO 3826:1993,Plastics collapsible containers for human blood and blood components,Poches en plastique souple pour le sang et les produits du sang,1993-03-04,1,['11.040.20'],ISO/TC 76,9599,,[37720],"['en','fr']",16,"
Specifies requirements, including performance requirements (dimensions, design, conditions of manufacture, sterilization, transparency, coloration, thermal stability, vapour transmission, resistance to distortion, resistance to leakage, chemical requirements, biological requirements, packaging, marking and labelling) for di-(2-ethylhexyl)phthalate plasticized polyvinyl chloride for complete plastics collapsible, non-vented, sterile containers.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3828:1976 - **Identifier:** ISO 3828:1976 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Deck machinery — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3828:1984 - **Withdrawn / published date:** 1976-11-01 _(verified: appears in the quote below)_ > 9382,IS,,ISO 3828:1976,Shipbuilding — Deck machinery — Vocabulary,Construction navale — Auxiliaires de pont — Vocabulaire,1976-11-01,1,"['01.040.47','47.020.50']",ISO/TC 8,9599,,[9383],"['en','fr']",20, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3828:1984 - **Identifier:** ISO 3828:1984 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding and marine structures — Deck machinery — Vocabulary _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3828:2008 - **Withdrawn / published date:** 1984-07-01 _(verified: appears in the quote below)_ > 9383,IS,,ISO 3828:1984,Shipbuilding and marine structures — Deck machinery — Vocabulary,Construction navale et structures maritimes — Auxiliaires de pont — Vocabulaire,1984-07-01,2,"['01.040.47','47.020.50']",ISO/TC 8/SC 4,9599,[9382],[37152],"['en','fr']",24,"Defines general terms used in connection with this subject and includes specific terms associated with cargo handling, anchoring and mooring, towing and ancillary deck equipment. The annex contains an multilingual vocabulary.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3830:1981 - **Identifier:** ISO 3830:1981 _(verified: appears in the quote below)_ - **Item title:** Petroleum products — Gasoline — Determination of lead content — Iodine monochloride method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3830:1993 - **Withdrawn / published date:** 1981-10-01 _(verified: appears in the quote below)_ > 9385,IS,,ISO 3830:1981,Petroleum products — Gasoline — Determination of lead content — Iodine monochloride method,Produits pétroliers — Essence — Détermination de la teneur en plomb — Méthode au monochlorure d'iode,1981-10-01,2,['75.160.20'],ISO/TC 28,9599,,[20778],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3832:1976 - **Identifier:** ISO 3832:1976 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Luggage compartments of passenger cars — Method of measuring the reference volume _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3832:1991 - **Withdrawn / published date:** 1976-05-01 _(verified: appears in the quote below)_ > 9387,IS,,ISO 3832:1976,Road vehicles — Luggage compartments of passenger cars — Method of measuring the reference volume,Véhicules routiers — Coffres à bagages des voitures particulières — Méthode de mesurage du volume de référence,1976-05-01,1,['43.040.60'],ISO/TC 22,9599,,[9388],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3832:1991 - **Identifier:** ISO 3832:1991 _(verified: appears in the quote below)_ - **Item title:** Passenger cars — Luggage compartments — Method of measuring reference volume _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3832:2002 - **Withdrawn / published date:** 1991-09-12 _(verified: appears in the quote below)_ > 9388,IS,,ISO 3832:1991,Passenger cars — Luggage compartments — Method of measuring reference volume,Voitures particulières — Coffres à bagages — Méthode de mesure du volume de référence,1991-09-12,2,['43.040.60'],ISO/TC 22,9599,[9387],[32995],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-1:1994 - **Identifier:** ISO 3834-1:1994 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for welding — Fusion welding of metallic materials — Part 1: Guidelines for selection and use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-1:2005 - **Withdrawn / published date:** 1994-12-15 _(verified: appears in the quote below)_ > 9392,IS,,ISO 3834-1:1994,Quality requirements for welding — Fusion welding of metallic materials — Part 1: Guidelines for selection and use,Exigences de qualité en soudage — Soudage par fusion des matériaux métalliques — Partie 1: Lignes directrices pour la sélection et l'utilisation,1994-12-15,1,['25.160.01'],ISO/TC 44/SC 10,9599,"[9391,12487]",[35144],"['en','fr']",6,"Gives guidelines have been prepared to describe welding quality requirements suitable for application by manufactures using welding as a means of fabrication. They are structured such that they can be used for fabrication of any type of fusion welded construction. These guidelines are intended as a guide for the preparatio Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-1:2005 - **Identifier:** ISO 3834-1:2005 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of the appropriate level of quality requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-1:2021 - **Withdrawn / published date:** 2005-12-09 _(verified: appears in the quote below)_ > 35144,IS,,ISO 3834-1:2005,Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of the appropriate level of quality requirements,Exigences de qualité en soudage par fusion des matériaux métalliques — Partie 1: Critères pour la sélection du niveau approprié d'exigences de qualité,2005-12-09,2,['25.160.01'],ISO/TC 44/SC 10,9599,[9392],[81650],"['en','fr']",7,"
ISO 3834-1:2005 provides criteria to be taken into account for the selection of the appropriate level of quality requirements for fusion welding of metallic materials, among the three levels specified in ISO 3834-2:2005 ISO 3834-3:2005 and ISO 3834-4:2005. It applies to manufacturing, both i Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834:1978 - **Identifier:** ISO 3834:1978 _(verified: appears in the quote below)_ - **Item title:** Welding — Factors to be considered when assessing firms using welding as a prime means of fabrication _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-1:1994 | ISO 3834-2:1994 | ISO 3834-3:1994 | ISO 3834-4:1994 - **Withdrawn / published date:** 1978-02-01 _(verified: appears in the quote below)_ > 9391,IS,,ISO 3834:1978,Welding — Factors to be considered when assessing firms using welding as a prime means of fabrication,Soudure — Facteurs à prendre en considération pour l'appréciation des entreprises utilisant le soudage comme moyen principal de fabrication,1978-02-01,1,['25.160.10'],ISO/TC 44,9599,,"[9392,21155,21156,21157]","['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-2:1994 - **Identifier:** ISO 3834-2:1994 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for welding — Fusion welding of metallic materials — Part 2: Comprehensive quality requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-2:2005 - **Withdrawn / published date:** 1994-12-15 _(verified: appears in the quote below)_ > 21155,IS,,ISO 3834-2:1994,Quality requirements for welding — Fusion welding of metallic materials — Part 2: Comprehensive quality requirements,Exigences de qualité en soudage — Soudage par fusion des matériaux métalliques — Partie 2: Exigences de qualité complète,1994-12-15,1,['25.160.01'],ISO/TC 44/SC 10,9599,"[9391,12487]",[35145],"['en','fr']",8,
Prepared such that it is independent of the type of welded construction to be manufactured; it defines quality requirements for welding both in workshops and on site; it provides guidance for describing a manufacturer's capability to produce welded constructions to meet specified requirements; it may also be used as a basis for assessing the ma Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-2:2005 - **Identifier:** ISO 3834-2:2005 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-2:2021 - **Withdrawn / published date:** 2005-12-09 _(verified: appears in the quote below)_ > 35145,IS,,ISO 3834-2:2005,Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements,Exigences de qualité en soudage par fusion des matériaux métalliques — Partie 2: Exigences de qualité complète,2005-12-09,2,['25.160.01'],ISO/TC 44/SC 10,9599,[21155],[81651],"['en','fr']",10,
ISO 3834-2:2005 defines comprehensive quality requirements for fusion welding of metallic materials both in workshops and at field installation sites
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-3:1994 - **Identifier:** ISO 3834-3:1994 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for welding — Fusion welding of metallic materials — Part 3: Standard quality requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-3:2005 - **Withdrawn / published date:** 1994-12-15 _(verified: appears in the quote below)_ > 21156,IS,,ISO 3834-3:1994,Quality requirements for welding — Fusion welding of metallic materials — Part 3: Standard quality requirements,Exigences de qualité en soudage — Soudage par fusion des matériaux métalliques — Partie 3: Exigences de qualité normale,1994-12-15,1,['25.160.01'],ISO/TC 44/SC 10,9599,"[9391,12487]",[35146],"['en','fr']",7,Prepared such that it is independent of the type of welded construction to be manufactured; it defines quality requirements for welding both in workshops and on site; it provides guidance for describing a manufacturer's capability to produce welded constructions to meet specified requirements; it may also be used as a basis for assessing the manufact Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-3:2005 - **Identifier:** ISO 3834-3:2005 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-3:2021 - **Withdrawn / published date:** 2005-12-09 _(verified: appears in the quote below)_ > 35146,IS,,ISO 3834-3:2005,Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements,Exigences de qualité en soudage par fusion des matériaux métalliques — Partie 3: Exigences de qualité normale,2005-12-09,2,['25.160.01'],ISO/TC 44/SC 10,9599,[21156],[81652],"['en','fr']",9,
ISO 3834-3:2005 defines standard quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-4:1994 - **Identifier:** ISO 3834-4:1994 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for welding — Fusion welding of metallic materials — Part 4: Elementary quality requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-4:2005 - **Withdrawn / published date:** 1994-12-15 _(verified: appears in the quote below)_ > 21157,IS,,ISO 3834-4:1994,Quality requirements for welding — Fusion welding of metallic materials — Part 4: Elementary quality requirements,Exigences de qualité en soudage — Soudage par fusion des matériaux métalliques — Partie 4: Exigences de qualité élémentaire,1994-12-15,1,['25.160.01'],ISO/TC 44/SC 10,9599,"[9391,12487]",[35147],"['en','fr']",3,Prepared such that it is independent of the type of welded construction to be manufactured; it defines quality requirements for welding both in workshops and on site; it provides guidance for describing a manufacturer's capability to produce welded constructions to meet specified requirements; it may also be used as a basis for assessing the ma Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-4:2005 - **Identifier:** ISO 3834-4:2005 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for fusion welding of metallic materials — Part 4: Elementary quality requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-4:2021 - **Withdrawn / published date:** 2005-12-09 _(verified: appears in the quote below)_ > 35147,IS,,ISO 3834-4:2005,Quality requirements for fusion welding of metallic materials — Part 4: Elementary quality requirements,Exigences de qualité en soudage par fusion des matériaux métalliques — Partie 4: Exigences de qualité élémentaire,2005-12-09,2,['25.160.01'],ISO/TC 44/SC 10,9599,[21157],[81653],"['en','fr']",3,
ISO 3834-4:2005 defines elementary quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-5:2005 - **Identifier:** ISO 3834-5:2005 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-5:2015 - **Withdrawn / published date:** 2005-12-09 _(verified: appears in the quote below)_ > 38135,IS,,ISO 3834-5:2005,"Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4","Exigences de qualité en soudage par fusion des matériaux métalliques — Partie 5: Documents auxquels il est nécessaire de se conformer pour déclarer la conformité aux exigences de qualité de l'ISO 3834-2, l'ISO 3834-3 ou l'ISO 3834-4",2005-12-09,1,['25.160.01'],ISO/TC 44/SC 10,9599,,[63729],"['en','fr']",8,"ISO 3834-5:2005 specifies the documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-5:2005/Cor 1:2007 - **Identifier:** ISO 3834-5:2005/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-5:2015 - **Withdrawn / published date:** 2007-08-02 _(verified: appears in the quote below)_ > 46473,IS,Cor,ISO 3834-5:2005/Cor 1:2007,"Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 — Technical Corrigendum 1","Exigences de qualité en soudage par fusion des matériaux métalliques — Partie 5: Documents auxquels il est nécessaire de se conformer pour déclarer la conformité aux exigences de qualité de l'ISO 3834-2, l'ISO 3834-3 ou l'ISO 3834-4 — Rectificatif technique 1",2007-08-02,1,['25.160.01'],ISO/TC 44/SC 10,9599,,[63729],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3834-5:2015 - **Identifier:** ISO 3834-5:2015 _(verified: appears in the quote below)_ - **Item title:** Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3834-5:2021 - **Withdrawn / published date:** 2015-06-08 _(verified: appears in the quote below)_ > 63729,IS,,ISO 3834-5:2015,"Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4","Exigences de qualité en soudage par fusion des matériaux métalliques — Partie 5: Documents auxquels il est nécessaire de se conformer pour déclarer la conformité aux exigences de qualité de l'ISO 3834-2, l'ISO 3834-3 ou l'ISO 3834-4",2015-06-08,2,['25.160.01'],ISO/TC 44/SC 10,9599,"[38135,46473]",[80112],"['en','fr']",8,"
ISO 3834-5:2015 specifies the International Standards with which it is necessary to conform to claim conformity to the quality requiremen Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3838:1983 - **Identifier:** ISO 3838:1983 _(verified: appears in the quote below)_ - **Item title:** Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3838:2004 - **Withdrawn / published date:** 1983-06-01 _(verified: appears in the quote below)_ > 9400,IS,,ISO 3838:1983,Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods,Pétrole brut et produits pétroliers liquides ou solides — Détermination de la masse volumique ou de la densité relative — Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué,1983-06-01,1,['75.080'],ISO/TC 28/SC 2,9599,,[33724],"['en','fr']",11,"
The first method is also for use with solids and this method may also be used for coal tar products, including road tars, creosote and tar pitches or for mixture of these with petroleum products. This method is not suita Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3839:1978 - **Identifier:** ISO 3839:1978 _(verified: appears in the quote below)_ - **Item title:** Petroleum distillates and commercial aliphatic olefins — Determination of bromine number — Electrometric method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3839:1996 - **Withdrawn / published date:** 1978-04-01 _(verified: appears in the quote below)_ > 9401,IS,,ISO 3839:1978,Petroleum distillates and commercial aliphatic olefins — Determination of bromine number — Electrometric method,Distillats du pétrole et oléfines aliphatiques commerciales — Détermination de l'indice de brome — Méthode électrométrique,1978-04-01,1,"['75.080','71.080.10']",ISO/TC 28,9599,,[22154],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 384:1978 - **Identifier:** ISO 384:1978 _(verified: appears in the quote below)_ - **Item title:** Laboratory glassware — Principles of design and construction of volumetric glassware _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/NP 384 | ISO 384:2015 - **Withdrawn / published date:** 1978-01-01 _(verified: appears in the quote below)_ > 4365,IS,,ISO 384:1978,Laboratory glassware — Principles of design and construction of volumetric glassware,Verrerie de laboratoire — Principes de conception et de construction de la verrerie volumétrique,1978-01-01,1,['17.060'],ISO/TC 48,9599,,"[56901,63918]","['en','fr']",13,"
Reference temperatur, volumetric accuracy, methods of verification and construction are considered. The annexes deal with the limits of volumetric error in relation to capacity and to the diameter at the meniscus. The interrelation between standard deviation, limit of volumetric error, and line thickness is described.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3841:1977 - **Identifier:** ISO 3841:1977 _(verified: appears in the quote below)_ - **Item title:** Petroleum waxes — Determination of melting point (cooling curve) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 3841 - **Withdrawn / published date:** 1977-02-01 _(verified: appears in the quote below)_ > 9403,IS,,ISO 3841:1977,Petroleum waxes — Determination of melting point (cooling curve),Cires de pétrole — Détermination du point de fusion (courbe de refroidissement),1977-02-01,1,['75.140'],ISO/TC 28,9599,,[26578],"['en','fr']",2,"The method specified is unsuitable for waxes of the petroleum group, the microcrystalline waxes, or blends of such waxes with paraffin wax or scale wax. The test is particularly applicable to substances that are rather highly paraffinic or crystalline in nature.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3842:1976 - **Identifier:** ISO 3842:1976 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Fifth wheel mounting _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3842:1984 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 9404,IS,,ISO 3842:1976,Road vehicles — Fifth wheel mounting,Véhicules routiers — Fixation des coupleurs d'attelage,1976-09-01,1,['43.040.70'],ISO/TC 22,9599,,[9405],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3842:1984 - **Identifier:** ISO 3842:1984 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Fifth wheel mounting _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3842:2001 - **Withdrawn / published date:** 1984-10-01 _(verified: appears in the quote below)_ > 9405,IS,,ISO 3842:1984,Road vehicles — Fifth wheel mounting,Véhicules routiers — Fixation des coupleurs d'attelage,1984-10-01,2,['43.040.70'],ISO/TC 22,9599,[9404],[24841],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3842:2001 - **Identifier:** ISO 3842:2001 _(verified: appears in the quote below)_ - **Item title:** Road vehicles — Fifth wheels — Interchangeability _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3842:2006 - **Withdrawn / published date:** 2001-02-15 _(verified: appears in the quote below)_ > 24841,IS,,ISO 3842:2001,Road vehicles — Fifth wheels — Interchangeability,Véhicules routiers — Sellette d'attelage — Interchangeabilité,2001-02-15,3,['43.040.70'],ISO/TC 22,9599,[9405],[36949],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 108](https://referencesource.org/iso-standard-supersessions/p/108/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 110](https://referencesource.org/iso-standard-supersessions/p/110/) Last verified: 2026-08-05. Review by: 2027-02-02.