The sample of coal is heated at 105 to 110 °C in a stream of oxygen-free, dry nitrogen and the moisture driven off is collected in an absorption tube containing a desiccant. The increase in mass of the absorption tube (after deducting the result of a separate blank determination) is due to moisture in the sample of coal.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3310-1:1982 - **Identifier:** ISO 3310-1:1982 _(verified: appears in the quote below)_ - **Item title:** Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3310-1:1990 - **Withdrawn / published date:** 1982-09-01 _(verified: appears in the quote below)_ > 8562,IS,,ISO 3310-1:1982,Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth,Tamis de contrôle — Exigences techniques et vérifications — Partie 1: Tamis de contrôle en tissus métalliques,1982-09-01,2,['19.120'],ISO/TC 24/SC 8,9599,,[8563],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3310-1:1990 - **Identifier:** ISO 3310-1:1990 _(verified: appears in the quote below)_ - **Item title:** Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3310-1:2000 - **Withdrawn / published date:** 1990-06-28 _(verified: appears in the quote below)_ > 8563,IS,,ISO 3310-1:1990,Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth,Tamis de contrôle — Exigences techniques et vérifications — Partie 1: Tamis de contrôle en tissus métalliques,1990-06-28,3,['19.120'],ISO/TC 24/SC 8,9599,[8562],[25147],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3310-1:2000 - **Identifier:** ISO 3310-1:2000 _(verified: appears in the quote below)_ - **Item title:** Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3310-1:2016 - **Withdrawn / published date:** 2000-07-27 _(verified: appears in the quote below)_ > 25147,IS,,ISO 3310-1:2000,Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth,Tamis de contrôle — Exigences techniques et vérifications — Partie 1: Tamis de contrôle en tissus métalliques,2000-07-27,4,['19.120'],ISO/TC 24/SC 8,9599,[8563],[62410],"['en','fr']",15, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3310-1:2000/Cor 1:2004 - **Identifier:** ISO 3310-1:2000/Cor 1:2004 _(verified: appears in the quote below)_ - **Item title:** Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3310-1:2016 - **Withdrawn / published date:** 2004-09-13 _(verified: appears in the quote below)_ > 41071,IS,Cor,ISO 3310-1:2000/Cor 1:2004,Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth — Technical Corrigendum 1,Tamis de contrôle — Exigences techniques et vérifications — Partie 1: Tamis de contrôle en tissus métalliques — Rectificatif technique 1,2004-09-13,4,['19.120'],ISO/TC 24/SC 8,9599,,[62410],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3310-2:1982 - **Identifier:** ISO 3310-2:1982 _(verified: appears in the quote below)_ - **Item title:** Test sieves — Technical requirements and testing — Part 2: Test sieves of metal perforated plate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3310-2:1990 - **Withdrawn / published date:** 1982-08-01 _(verified: appears in the quote below)_ > 8564,IS,,ISO 3310-2:1982,Test sieves — Technical requirements and testing — Part 2: Test sieves of metal perforated plate,Tamis de contrôle — Exigences techniques et vérifications — Partie 2: Tamis de contrôle en tôles métalliques perforées,1982-08-01,2,['19.120'],ISO/TC 24/SC 8,9599,,[8565],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3310-2:1990 - **Identifier:** ISO 3310-2:1990 _(verified: appears in the quote below)_ - **Item title:** Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3310-2:1999 - **Withdrawn / published date:** 1990-10-25 _(verified: appears in the quote below)_ > 8565,IS,,ISO 3310-2:1990,Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate,Tamis de contrôle — Exigences techniques et vérifications — Partie 2: Tamis de contrôle en tôles métalliques perforées,1990-10-25,3,['19.120'],ISO/TC 24/SC 8,9599,[8564],[25148],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3310-2:1999 - **Identifier:** ISO 3310-2:1999 _(verified: appears in the quote below)_ - **Item title:** Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3310-2:2013 - **Withdrawn / published date:** 1999-08-19 _(verified: appears in the quote below)_ > 25148,IS,,ISO 3310-2:1999,Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate,Tamis de contrôle — Exigences techniques et vérifications — Partie 2: Tamis de contrôle en tôles métalliques perforées,1999-08-19,4,['19.120'],ISO/TC 24/SC 8,9599,[8565],[63508],"['en','fr']",10, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3312:1975 - **Identifier:** ISO 3312:1975 _(verified: appears in the quote below)_ - **Item title:** Sintered metal materials and hardmetals — Determination of Young's modulus _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3312:1987 - **Withdrawn / published date:** 1975-02-01 _(verified: appears in the quote below)_ > 8568,IS,,ISO 3312:1975,Sintered metal materials and hardmetals — Determination of Young's modulus,Matériaux métalliques frittés et métaux durs — Détermination du module de Young,1975-02-01,1,"['77.160','77.040.10']",ISO/TC 119,9599,,[8569],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3315:1975 - **Identifier:** ISO 3315:1975 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3315:1988 - **Withdrawn / published date:** 1975-07-01 _(verified: appears in the quote below)_ > 8573,IS,,ISO 3315:1975,Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing,Outils de manoeuvre pour vis et écrous — Pièces de commande pour douilles à main à carré conducteur — Essai de résistance à la torsion,1975-07-01,1,['25.140.30'],ISO/TC 29,9599,,[8574],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3315:1988 - **Identifier:** ISO 3315:1988 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3315:1996 - **Withdrawn / published date:** 1988-09-29 _(verified: appears in the quote below)_ > 8574,IS,,ISO 3315:1988,Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing,Outils de manoeuvre pour vis et écrous — Pièces de commande pour douilles à main à carré conducteur — Essai de résistance à la torsion,1988-09-29,2,['25.140.30'],ISO/TC 29/SC 10,9599,[8573],[23589],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3315:1996 - **Identifier:** ISO 3315:1996 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3315:2011 - **Withdrawn / published date:** 1996-11-28 _(verified: appears in the quote below)_ > 23589,IS,,ISO 3315:1996,Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests,Outils de manoeuvre pour vis et écrous — Pièces de commande pour douilles à main à carré conducteur — Dimensions et essais,1996-11-28,3,['25.140.30'],ISO/TC 29/SC 10,9599,[8574],[53386],"['en','fr']",6,"Applies to attachments for hand-operated square drive socket wrenches as listed under the numbers 251 to 257 in ISO 1703. Specifies overall dimensions, Rockwell hardness values, minimum torsional strength values, designation and marking.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3315:2011 - **Identifier:** ISO 3315:2011 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3315:2018 - **Withdrawn / published date:** 2011-04-07 _(verified: appears in the quote below)_ > 53386,IS,,ISO 3315:2011,Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests,Outils de manoeuvre pour vis et écrous — Pièces de commande pour douilles à main à carré conducteur — Dimensions et essais,2011-04-07,4,['25.140.30'],ISO/TC 29/SC 10,9599,[23589],[74195],"['en','fr']",7,"ISO 3315:2011 is applicable to the driving parts of hand-operated square drive socket wrenches identified in ISO 1703 under designations 6 1 00 04 0, 6 1 00 06 0, 6 1 00 06 1, 6 1 00 09 0, 6 1 00 10 0, 6 1 00 10 1, 6 1 00 01 0, 6 1 00 01 1, 6 1 00 03 0, 6 1 00 05 0 and 6 1 00 05 1.
ISO 3315:2011 specifies the overall dimensions, the minimu Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3316:1975 - **Identifier:** ISO 3316:1975 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3316:1988 - **Withdrawn / published date:** 1975-04-01 _(verified: appears in the quote below)_ > 8575,IS,,ISO 3316:1975,Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing,Outils de manoeuvre pour vis et écrous — Adaptateurs pour douilles à main à carré conducteur — Essai de résistance à la torsion,1975-04-01,1,['25.140.30'],ISO/TC 29,9599,,[8576],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3316:1988 - **Identifier:** ISO 3316:1988 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3316:1996 - **Withdrawn / published date:** 1988-09-29 _(verified: appears in the quote below)_ > 8576,IS,,ISO 3316:1988,Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing,Outils de manoeuvre pour vis et écrous — Adapteurs pour douilles à main à carré conducteur — Essai de résistance à la torsion,1988-09-29,2,['25.140.30'],ISO/TC 29/SC 10,9599,[8575],[21907],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3316:1996 - **Identifier:** ISO 3316:1996 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3316:2012 - **Withdrawn / published date:** 1996-11-28 _(verified: appears in the quote below)_ > 21907,IS,,ISO 3316:1996,Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests,Outils de manoeuvre pour vis et écrous — Adaptateurs pour douilles à main à carré conducteur — Dimensions et essais,1996-11-28,3,['25.140.30'],ISO/TC 29/SC 10,9599,[8576],[53387],"['en','fr']",6,"
Applies to attachments for hand-operated square drive socket wrenches as listed under the numbers 203 to 206 in ISO 1703. Specifies overall dimensions, Rockwell hardness values, minimum torsional strength values, designation and marking.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3316:2012 - **Identifier:** ISO 3316:2012 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3316:2018 - **Withdrawn / published date:** 2012-02-22 _(verified: appears in the quote below)_ > 53387,IS,,ISO 3316:2012,Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests,Outils de manoeuvre pour vis et écrous — Adaptateurs pour douilles à main à carré conducteur — Dimensions et essais,2012-02-22,4,['25.140.30'],ISO/TC 29/SC 10,9599,[21907],[74194],"['en','fr']",6,"ISO 3316:2012 applies to attachments for hand-operated square drive socket wrenches listed in ISO 1703 under designations 5 1 00 03 0, 5 1 00 04 0, 5 1 00 04 1 and 5 1 00 05 0 (corresponding to the former designation numbers 203, 204 and 205).
ISO 3316:2012 specifies the overall dimensions, the minimum Rockwell hardness value for their driving squar Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3317:1974 - **Identifier:** ISO 3317:1974 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Square drive extension hexagon insert, for power socket wrenches _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3317:2009 - **Withdrawn / published date:** 1974-12-01 _(verified: appears in the quote below)_ > 8577,IS,,ISO 3317:1974,"Assembly tools for screws and nuts — Square drive extension hexagon insert, for power socket wrenches","Outils de manoeuvre pour vis et écrous — Adaptateurs à carré mâle avec entraînement hexagone mâle, pour douilles machines",1974-12-01,1,['25.140.01'],ISO/TC 29/SC 10,9599,,[44749],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3317:2009 - **Identifier:** ISO 3317:2009 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3317:2015 - **Withdrawn / published date:** 2009-06-17 _(verified: appears in the quote below)_ > 44749,IS,,ISO 3317:2009,"Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches","Outils de manoeuvre pour vis et écrous — Adaptateurs à carré mâle avec entraînement hexagonal ou cylindrique mâle, pour douilles machines",2009-06-17,2,['25.140.30'],ISO/TC 29/SC 10,9599,[8577],[64799],"['en','fr']",5,"
ISO 3317:2009 prescribes the technical specifications for square drive adaptor hexagon or cylindrical flat inserts for power socket wrenches. It applies to square drive adaptors with hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to driving squares for power socket wrenches as defined in ISO 1174 Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3318:1982 - **Identifier:** ISO 3318:1982 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Open-end double-head engineers' wrenches, double-head box wrenches and combination wrenches — Maximum widths of heads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3318:1990 - **Withdrawn / published date:** 1982-12-01 _(verified: appears in the quote below)_ > 8578,IS,,ISO 3318:1982,"Assembly tools for screws and nuts — Open-end double-head engineers' wrenches, double-head box wrenches and combination wrenches — Maximum widths of heads","Outils de manoeuvre pour vis et écrous — Clés à fourche doubles, polygonales doubles, et clés mixtes — Largeurs maximales d'encombrement des têtes",1982-12-01,2,['25.140.30'],ISO/TC 29,9599,,[8579],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3318:1990 - **Identifier:** ISO 3318:1990 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches — Maximum widths of heads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3318:2009 - **Withdrawn / published date:** 1990-12-06 _(verified: appears in the quote below)_ > 8579,IS,,ISO 3318:1990,"Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches — Maximum widths of heads","Outils de manoeuvre pour vis et écrous — Clés à fourche doubles, polygonales doubles, et clés mixtes — Largeurs maximales d'encombrement des têtes",1990-12-06,3,['25.140.30'],ISO/TC 29/SC 10,9599,[8578],[44750],"['en','fr']",2,"
Specifies the maximum outside head dimensions for wrenches, listed in ISO 1703 under numbers 4 and 8 to 14, except for wrench No. 12. Tabulates widths across flats from 3,2 mm up to 60 mm together with the corresponding outside head dimensions. This third edition cancels and replaces the sec Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3318:2009 - **Identifier:** ISO 3318:2009 _(verified: appears in the quote below)_ - **Item title:** Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches — Maximum widths of heads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3318:2016 - **Withdrawn / published date:** 2009-05-28 _(verified: appears in the quote below)_ > 44750,IS,,ISO 3318:2009,"Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches — Maximum widths of heads","Outils de manoeuvre pour vis et écrous — Clés à fourche doubles, clés polygonales doubles et clés mixtes — Largeurs maximales d'encombrement des têtes",2009-05-28,4,['25.140.30'],ISO/TC 29/SC 10,9599,[8579],[67581],"['en','fr']",3,"
ISO 3318:2009 specifies the maximum outside head dimensions for double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches, identified in ISO 1703 under reference Nos. 1 1 01 02 0, 1 1 01 05 0, 1 1 01 06 0, 1 1 02 03 0, 1 1 02 04 0, 1 1 02 05 0, 1 1 02 06 0.< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3320:1975 - **Identifier:** ISO 3320:1975 _(verified: appears in the quote below)_ - **Item title:** Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3320:1987 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 8580,IS,,ISO 3320:1975,Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series,Transmissions hydrauliques et pneumatiques — Alésages des vérins et diamètres des tiges de piston — Série métrique,1975-11-01,1,['23.100.20'],ISO/TC 131,9599,,[8581],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3320:1987 - **Identifier:** ISO 3320:1987 _(verified: appears in the quote below)_ - **Item title:** Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3320:2013 - **Withdrawn / published date:** 1987-09-10 _(verified: appears in the quote below)_ > 8581,IS,,ISO 3320:1987,Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series,Transmissions hydrauliques et pneumatiques — Alésages des vérins et diamètres des tiges de piston — Série métrique,1987-09-10,2,['23.100.20'],ISO/TC 131/SC 3,9599,[8580],[61647],"['en','fr']",2,
This second edition cancels and replaces the first edition (1975). It establishes a metric series of bores and diameters. It only applies to the dimensional criteria of products manufactured in conformity with this standard; it does not apply to their functional characteristics. A figure shows the identification of bore and rod dimensions.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3322:1975 - **Identifier:** ISO 3322:1975 _(verified: appears in the quote below)_ - **Item title:** Fluid power systems and components — Cylinders — Nominal pressures _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3322:1985 - **Withdrawn / published date:** 1975-11-01 _(verified: appears in the quote below)_ > 8583,IS,,ISO 3322:1975,Fluid power systems and components — Cylinders — Nominal pressures,Transmissions hydrauliques et pneumatiques — Vérins — Pressions nominales,1975-11-01,1,['23.100.20'],ISO/TC 131,9599,,[8584],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3323:1976 - **Identifier:** ISO 3323:1976 _(verified: appears in the quote below)_ - **Item title:** Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3323:1987 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 8585,IS,,ISO 3323:1976,Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved,Aéronefs — Organes hydrauliques — Marquage indiquant le fluide pour lequel les organes sont approuvés,1976-09-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[8586],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3323:1987 - **Identifier:** ISO 3323:1987 _(verified: appears in the quote below)_ - **Item title:** Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3323:2023 - **Withdrawn / published date:** 1987-07-09 _(verified: appears in the quote below)_ > 8586,IS,,ISO 3323:1987,Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved,Aéronefs — Composants hydrauliques — Marquage indiquant le fluide pour lequel les composants sont approuvés,1987-07-09,2,['49.080'],ISO/TC 20/SC 10,9599,[8585],[81756],"['en','fr']",2,"Establishes a scheme for the marking, so that the correct type of fluid is readily apparent during any assembly or testing operations in workshops. The marking is not intended to serve any purpose when a component is installed in an aircraft. Describes the scheme, materials, design and manufacture and gives preferred dimensions of identifications plates.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3324-1:1985 - **Identifier:** ISO 3324-1:1985 _(verified: appears in the quote below)_ - **Item title:** Aircraft tyres and rims — Part 1: Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3324-1:1993 - **Withdrawn / published date:** 1985-10-10 _(verified: appears in the quote below)_ > 8587,IS,,ISO 3324-1:1985,Aircraft tyres and rims — Part 1: Specifications,Pneumatiques et jantes pour aéronefs — Partie 1: Spécifications,1985-10-10,2,['83.160.20'],ISO/TC 31,9599,,[8588],"['en','fr']",48, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3324-1:1993 - **Identifier:** ISO 3324-1:1993 _(verified: appears in the quote below)_ - **Item title:** Aircraft tyres and rims — Part 1: Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3324-1:1997 - **Withdrawn / published date:** 1993-11-18 _(verified: appears in the quote below)_ > 8588,IS,,ISO 3324-1:1993,Aircraft tyres and rims — Part 1: Specifications,Pneumatiques et jantes pour aéronefs — Partie 1: Spécifications,1993-11-18,3,['83.160.20'],ISO/TC 31,9599,[8587],[23723],"['en','fr']",23, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3324-1:1997 - **Identifier:** ISO 3324-1:1997 _(verified: appears in the quote below)_ - **Item title:** Aircraft tyres and rims — Part 1: Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3324-1:2013 - **Withdrawn / published date:** 1997-12-25 _(verified: appears in the quote below)_ > 23723,IS,,ISO 3324-1:1997,Aircraft tyres and rims — Part 1: Specifications,Pneumatiques et jantes pour aéronefs — Partie 1: Spécifications,1997-12-25,4,['83.160.20'],ISO/TC 31,9599,[8588],[54126],"['en','fr']",24, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3324-2:1979 - **Identifier:** ISO 3324-2:1979 _(verified: appears in the quote below)_ - **Item title:** Aircraft tyres and rims — Part 2: Test methods for tyres _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3324-2:1998 - **Withdrawn / published date:** 1979-05-01 _(verified: appears in the quote below)_ > 8589,IS,,ISO 3324-2:1979,Aircraft tyres and rims — Part 2: Test methods for tyres,Pneumatiques et jantes pour aéronefs — Partie 2: Méthodes d'essai pour les pneus,1979-05-01,1,['83.160.20'],ISO/TC 31,9599,,[24305],"['en','fr']",11, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3324-2:1998 - **Identifier:** ISO 3324-2:1998 _(verified: appears in the quote below)_ - **Item title:** Aircraft tyres and rims — Part 2: Test methods for tyres _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3324-2:2013 - **Withdrawn / published date:** 1998-02-01 _(verified: appears in the quote below)_ > 24305,IS,,ISO 3324-2:1998,Aircraft tyres and rims — Part 2: Test methods for tyres,Pneumatiques et jantes pour aéronefs — Partie 2: Méthodes d'essai des pneumatiques,1998-02-01,2,['83.160.20'],ISO/TC 31,9599,[8589],[54125],"['en','fr']",14, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3325:1975 - **Identifier:** ISO 3325:1975 _(verified: appears in the quote below)_ - **Item title:** Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3325:1996 - **Withdrawn / published date:** 1975-07-01 _(verified: appears in the quote below)_ > 8590,IS,,ISO 3325:1975,"Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength","Matériaux métalliques frittés, à l'exclusion des métaux durs — Détermination de la résistance à la flexion",1975-07-01,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,[1584],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3325:1996 - **Identifier:** ISO 3325:1996 _(verified: appears in the quote below)_ - **Item title:** Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3325:2026 - **Withdrawn / published date:** 1996-10-31 _(verified: appears in the quote below)_ > 1584,IS,,ISO 3325:1996,"Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength",Matériaux métalliques frittés à l'exclusion des métaux-durs — Détermination de la résistance à la rupture transversale,1996-10-31,2,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,[8590],[85771],"['en','fr']",3,"Gives a method for the determination of the transverse rupture strength of sintered metals, excluding hardmetals. Particularly suitable for comparing the sintered strength of a batch of metal powder with that of a reference powder or with a reference strength.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3325:1996/Amd 1:2001 - **Identifier:** ISO 3325:1996/Amd 1:2001 _(verified: appears in the quote below)_ - **Item title:** Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength — Amendment 1: Precision statement _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3325:2026 - **Withdrawn / published date:** 2001-02-01 _(verified: appears in the quote below)_ > 31250,IS,Amd,ISO 3325:1996/Amd 1:2001,"Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength — Amendment 1: Precision statement",Matériaux métalliques frittés à l'exclusion des métaux-durs — Détermination de la résistance à la rupture transversale — Amendement 1: Données concernant la fidélité,2001-02-01,2,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,[85771],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3326:1975 - **Identifier:** ISO 3326:1975 _(verified: appears in the quote below)_ - **Item title:** Hardmetals — Determination of (the magnetization) coercivity _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3326:2013 - **Withdrawn / published date:** 1975-02-01 _(verified: appears in the quote below)_ > 8591,IS,,ISO 3326:1975,Hardmetals — Determination of (the magnetization) coercivity,Métaux-durs — Détermination de la coercitivité (d'aimantation),1975-02-01,1,"['77.160','77.040.99']",ISO/TC 119/SC 4,9599,,[61269],"['en','fr']",2,"Applies to hardmetals containing not less than 3% if a ferromagnetic binder by mass. Specifies principle, symbols and designations, apparatus, sampling, procedure, expression of results and test report.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3327:1982 - **Identifier:** ISO 3327:1982 _(verified: appears in the quote below)_ - **Item title:** Hardmetals — Determination of transverse rupture strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3327:2009 | ISO/DIS 3327 - **Withdrawn / published date:** 1982-08-01 _(verified: appears in the quote below)_ > 8592,IS,,ISO 3327:1982,Hardmetals — Determination of transverse rupture strength,Métaux-durs — Détermination de la résistance à la flexion,1982-08-01,2,"['77.160','77.040.10']",ISO/TC 119/SC 4,9599,,"[43511,28562]","['en','fr']",2,"This second edition cancels and replaces the first edition (i.e. ISO 3327:1975). Is applicable to hardmetals of negligible ductility. If it is used for hardmetals showing significant plastic deformation before breaking, incorrect results may be obtained. In such instances, the method may be used for comparison purposes only. Gives symbols and designations in table 1, dimensions of test pieces in table 2, and values of chamfer correction factor in table 3.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 333:1983 - **Identifier:** ISO 333:1983 _(verified: appears in the quote below)_ - **Item title:** Coal — Determination of nitrogen — Semi-micro Kjeldahl method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 333:1996 - **Withdrawn / published date:** 1983-09-01 _(verified: appears in the quote below)_ > 4277,IS,,ISO 333:1983,Coal — Determination of nitrogen — Semi-micro Kjeldahl method,Charbon — Dosage de l'azote — Méthode semi-micrométrique de Kjeldahl,1983-09-01,3,['73.040'],ISO/TC 27/SC 5,9599,[5342],[4278],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3334:1976 - **Identifier:** ISO 3334:1976 _(verified: appears in the quote below)_ - **Item title:** Microcopying — ISO Test chart No. 2 — Description and use in photographic documentary reproduction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3334:1989 - **Withdrawn / published date:** 1976-09-01 _(verified: appears in the quote below)_ > 8599,IS,,ISO 3334:1976,Microcopying — ISO Test chart No. 2 — Description and use in photographic documentary reproduction,Microcopie — Mire ISO no 2 — Description et utilisation dans la reproduction photographique des documents,1976-09-01,1,['37.080'],ISO/TC 171/SC 1,9599,,[8600],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3334:1989 - **Identifier:** ISO 3334:1989 _(verified: appears in the quote below)_ - **Item title:** Micrographics — ISO resolution test chart No. 2 — Description and use _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3334:2006 - **Withdrawn / published date:** 1989-10-26 _(verified: appears in the quote below)_ > 8600,IS,,ISO 3334:1989,Micrographics — ISO resolution test chart No. 2 — Description and use,Micrographie — Mire de résolution ISO no. 2 — Description et utilisation,1989-10-26,2,['37.080'],ISO/TC 171/SC 1,9599,[8599],[36569],"['en','fr']",5,"Constitutes aminor revision of the first edition (ISO 3334:1970). Described is a method of determining the resolving power of a given camera, film and development combination in a microcoping system or the resolution achieved in microcopies therefrom. A test chart is specified for this purpose. Also specified is the manner in which the resolving power is to be quoted or defined.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3335:1977 - **Identifier:** ISO 3335:1977 _(verified: appears in the quote below)_ - **Item title:** Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) — Chemical composition and mechanical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 209-1:1989 - **Withdrawn / published date:** 1977-12-01 _(verified: appears in the quote below)_ > 8601,IS,,ISO 3335:1977,"Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) — Chemical composition and mechanical properties","Profilés pleins en alliage aluminium-zinc- magnésium Al Zn4,5 Mg1 (7020) — Composition chimique et caractéristiques mécaniques",1977-12-01,1,"['77.150.60','77.150.10','77.150.20']",ISO/TC 79/SC 6,9599,,[4076],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3336:1977 - **Identifier:** ISO 3336:1977 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Synthetic resin teeth _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3336:1993 - **Withdrawn / published date:** 1977-10-01 _(verified: appears in the quote below)_ > 8602,IS,,ISO 3336:1977,Dentistry — Synthetic resin teeth,Art dentaire — Dents en résine synthétique,1977-10-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[8603],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3336:1993 - **Identifier:** ISO 3336:1993 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Synthetic polymer teeth _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 22112:2005 - **Withdrawn / published date:** 1993-08-19 _(verified: appears in the quote below)_ > 8603,IS,,ISO 3336:1993,Dentistry — Synthetic polymer teeth,Produits et matériel pour l'art dentaire — Dents en polymères synthétiques,1993-08-19,2,['11.060.10'],ISO/TC 106/SC 2,9599,[8602],[36124],"['en','fr']",8,"Specifies a classification (anterior teeth, posterior teeth), requirements and test methods for teeth which are composed of synthetic polymers such as poly(methyl methacrylate) and its copolymers, and which are manufactured for use in prostheses used in dentistry.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3337:1978 - **Identifier:** ISO 3337:1978 _(verified: appears in the quote below)_ - **Item title:** T-slot cutters with plain or flatted parallel shanks and with Morse taper shanks having tapped hole — Metric series _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3337:2000 - **Withdrawn / published date:** 1978-12-01 _(verified: appears in the quote below)_ > 8604,IS,,ISO 3337:1978,T-slot cutters with plain or flatted parallel shanks and with Morse taper shanks having tapped hole — Metric series,"Fraises pour rainures à T, à queue cylindrique lisse, cylindrique à méplat et à queue cône Morse à trou taraudé — Série métrique",1978-12-01,2,['25.100.20'],ISO/TC 29,9599,,[33368],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3338-1:1977 - **Identifier:** ISO 3338-1:1977 _(verified: appears in the quote below)_ - **Item title:** Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3338-1:1993 - **Withdrawn / published date:** 1977-03-01 _(verified: appears in the quote below)_ > 8605,IS,,ISO 3338-1:1977,Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks,Queues cylindriques d'outils à fraiser — Partie 1: Caractéristiques dimensionnelles des queues cylindriques lisses,1977-03-01,2,['25.100.20'],ISO/TC 29,9599,,[21091],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3338-1:1993 - **Identifier:** ISO 3338-1:1993 _(verified: appears in the quote below)_ - **Item title:** Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3338-1:1996 - **Withdrawn / published date:** 1993-10-21 _(verified: appears in the quote below)_ > 21091,IS,,ISO 3338-1:1993,Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks,Queues cylindriques d'outils à fraiser — Partie 1: Caractéristiques dimensionnelles des queues cylindriques lisses,1993-10-21,3,['25.100.20'],ISO/TC 29,9599,[8605],[27425],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3338-2:1977 - **Identifier:** ISO 3338-2:1977 _(verified: appears in the quote below)_ - **Item title:** Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3338-2:1985 - **Withdrawn / published date:** 1977-03-01 _(verified: appears in the quote below)_ > 8606,IS,,ISO 3338-2:1977,Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks,Queues cylindriques d'outils à fraiser — Partie 2: Caractéristiques dimensionnelles des queues cylindriques à méplat,1977-03-01,2,['25.100.20'],ISO/TC 29,9599,,[8607],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3338-2:1985 - **Identifier:** ISO 3338-2:1985 _(verified: appears in the quote below)_ - **Item title:** Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3338-2:1996 - **Withdrawn / published date:** 1985-10-03 _(verified: appears in the quote below)_ > 8607,IS,,ISO 3338-2:1985,Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks,Queues cylindriques d'outils à fraiser — Partie 2: Caractéristiques dimensionnelles des queues cylindriques à méplat,1985-10-03,3,['25.100.20'],ISO/TC 29,9599,[8606],[27426],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3338-2:1996 - **Identifier:** ISO 3338-2:1996 _(verified: appears in the quote below)_ - **Item title:** Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3338-2:2000 - **Withdrawn / published date:** 1996-12-26 _(verified: appears in the quote below)_ > 27426,IS,,ISO 3338-2:1996,Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks,Queues cylindriques d'outils à fraiser — Partie 2: Caractéristiques dimensionnelles des queues cylindriques à méplat,1996-12-26,4,['25.100.20'],ISO/TC 29,9599,[8607],[33367],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3338-2:2000 - **Identifier:** ISO 3338-2:2000 _(verified: appears in the quote below)_ - **Item title:** Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3338-2:2007 - **Withdrawn / published date:** 2000-06-08 _(verified: appears in the quote below)_ > 33367,IS,,ISO 3338-2:2000,Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks,Queues cylindriques d'outils à fraiser — Partie 2: Caractéristiques dimensionnelles des queues cylindriques à méplat,2000-06-08,5,['25.100.20'],ISO/TC 29,9599,"[28664,27426]",[42234],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3338-2:2007 - **Identifier:** ISO 3338-2:2007 _(verified: appears in the quote below)_ - **Item title:** Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3338-2:2013 - **Withdrawn / published date:** 2007-02-09 _(verified: appears in the quote below)_ > 42234,IS,,ISO 3338-2:2007,Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks,Queues cylindriques d'outils à fraiser — Partie 2: Caractéristiques dimensionnelles des queues cylindriques à méplat,2007-02-09,6,['25.100.20'],ISO/TC 29,9599,[33367],[60699],"['en','fr']",4,"ISO 3338-2:2007 specifies the dimensions of flatted cylindrical shanks for milling cutters — of diameters 6 mm to 20 mm for single-flatted shanks, 25 mm to 63 mm for double-flatted shanks and 6 mm to 32 mm for shanks with an inclined clamping surface. In the case of single-flatted shanks, it is applicable to both single-ended cutters and double-ended cutters, as double- Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3339-0:1979 - **Identifier:** ISO 3339-0:1979 _(verified: appears in the quote below)_ - **Item title:** Tractors and machinery for agriculture and forestry — Classification and terminology — Part 0: Classification system and classification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3339-0:1986 - **Withdrawn / published date:** 1979-05-01 _(verified: appears in the quote below)_ > 8608,IS,,ISO 3339-0:1979,Tractors and machinery for agriculture and forestry — Classification and terminology — Part 0: Classification system and classification,Tracteurs et matériels agricoles et forestiers — Classification et terminologie — Partie 0: Système de classification et classification,1979-05-01,1,"['01.040.65','65.060.01']",ISO/TC 23,9599,,[8609],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 334:1975 - **Identifier:** ISO 334:1975 _(verified: appears in the quote below)_ - **Item title:** Coal and coke — Determination of total sulphur — Eschka method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 334:1992 - **Withdrawn / published date:** 1975-01-01 _(verified: appears in the quote below)_ > 4279,IS,,ISO 334:1975,Coal and coke — Determination of total sulphur — Eschka method,Charbon et coke — Dosage du soufre total — Méthode Eschka,1975-01-01,1,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[5342],[4280],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 334:1992 - **Identifier:** ISO 334:1992 _(verified: appears in the quote below)_ - **Item title:** Solid mineral fuels — Determination of total sulfur — Eschka method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 334:2013 - **Withdrawn / published date:** 1992-12-10 _(verified: appears in the quote below)_ > 4280,IS,,ISO 334:1992,Solid mineral fuels — Determination of total sulfur — Eschka method,Combustibles minéraux solides — Dosage du soufre total — Méthode Eschka,1992-12-10,2,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[4279],[63441],['en'],5,"
The reference method specified is based on igniting a test portion (of hard coal, brown coal, lignite, or coke) in intimate contact with Eschka mixture in an oxidizing atmosphere, removal of combustible matter and conversion of the sulfur to sulfate, extraction of sulfate with hydrochloric acid solution and gravimetric determination by precipitation with barium chloride.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 334:2013 - **Identifier:** ISO 334:2013 _(verified: appears in the quote below)_ - **Item title:** Solid mineral fuels — Determination of total sulfur — Eschka method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 334:2020 - **Withdrawn / published date:** 2013-10-10 _(verified: appears in the quote below)_ > 63441,IS,,ISO 334:2013,Solid mineral fuels — Determination of total sulfur — Eschka method,Combustibles minéraux solides — Dosage du soufre total — Méthode Eschka,2013-10-10,3,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[4280],[79738],['en'],7,"ISO 334:2013 specifies a reference method for determining the total sulfur content of hard coal, brown coals and lignites, and coke by the Eschka method.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3341:1977 - **Identifier:** ISO 3341:1977 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Yarns — Determination of breaking force and breaking elongation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3341:1984 - **Withdrawn / published date:** 1977-12-01 _(verified: appears in the quote below)_ > 8622,IS,,ISO 3341:1977,Textile glass — Yarns — Determination of breaking force and breaking elongation,Verre textile — Fils — Détermination de la force de rupture et de l'allongement de rupture en traction,1977-12-01,1,['59.100.10'],ISO/TC 61,9599,,[8623],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3341:1984 - **Identifier:** ISO 3341:1984 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Yarns — Determination of breaking force and breaking elongation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3341:2000 - **Withdrawn / published date:** 1984-09-01 _(verified: appears in the quote below)_ > 8623,IS,,ISO 3341:1984,Textile glass — Yarns — Determination of breaking force and breaking elongation,Verre textile — Fils — Détermination de la force de rupture et de l'allongement à la rupture en traction,1984-09-01,2,['59.100.10'],ISO/TC 61/SC 13,9599,[8622],[1934],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3342:1975 - **Identifier:** ISO 3342:1975 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Determination of tensile breaking force of mats _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3342:1987 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 8624,IS,,ISO 3342:1975,Textile glass — Determination of tensile breaking force of mats,Verre textile — Détermination de la force de rupture en traction des mats,1975-12-01,1,['59.100.10'],ISO/TC 61,9599,,[8625],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3342:1987 - **Identifier:** ISO 3342:1987 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Mats — Determination of tensile breaking force _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3342:1995 - **Withdrawn / published date:** 1987-04-09 _(verified: appears in the quote below)_ > 8625,IS,,ISO 3342:1987,Textile glass — Mats — Determination of tensile breaking force,Verre textile — Mats — Détermination de la force de rupture en traction,1987-04-09,2,['59.100.10'],ISO/TC 61/SC 13,9599,[8624],[23273],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3342:1995 - **Identifier:** ISO 3342:1995 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Mats — Determination of tensile breaking force _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3342:2011 - **Withdrawn / published date:** 1995-05-18 _(verified: appears in the quote below)_ > 23273,IS,,ISO 3342:1995,Textile glass — Mats — Determination of tensile breaking force,Verre textile — Mats — Détermination de la force de rupture en traction,1995-05-18,3,['59.100.10'],ISO/TC 61/SC 13,9599,[8625],[59251],"['en','fr']",3,Cancels and replaces the second edition (1987). Specifies a method for the determination of the tensile breaking force of textile glass mats. Intended for chopped-strand mat but equally applicable to certain types of continuous-strand mat usually intended for pultrusion.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3343:1975 - **Identifier:** ISO 3343:1975 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Determination of twist balance index of yarns _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3343:1984 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 8626,IS,,ISO 3343:1975,Textile glass — Determination of twist balance index of yarns,Verre textile — Détermination de l'indice d'équilibre en torsion des fils,1975-12-01,1,['59.100.10'],ISO/TC 61,9599,,[8627],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3343:1984 - **Identifier:** ISO 3343:1984 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Yarns — Determination of twist balance index _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3343:2010 - **Withdrawn / published date:** 1984-02-01 _(verified: appears in the quote below)_ > 8627,IS,,ISO 3343:1984,Textile glass — Yarns — Determination of twist balance index,Verre textile — Fils — Détermination de l'indice d'équilibre en torsion,1984-02-01,2,['59.100.10'],ISO/TC 61/SC 13,9599,[8626],[55464],"['en','fr']",1,"Specification of a method for determining the twist balance index of folded and cabled textile glass yarns. Test specimen is 1 m of tangentially from a package unwound yarn. If the specimen hangs down to form an open loop, with the two ends 100 mm apart, the number of turns shall be counted, which the yarn makes on itself. The determination shall be repeated five times.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3344:1977 - **Identifier:** ISO 3344:1977 _(verified: appears in the quote below)_ - **Item title:** Textile glass products — Determination of moisture content _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3344:1997 - **Withdrawn / published date:** 1977-08-01 _(verified: appears in the quote below)_ > 8628,IS,,ISO 3344:1977,Textile glass products — Determination of moisture content,Produits en verre textile — Détermination du taux d'humidité,1977-08-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[23274],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3345:1975 - **Identifier:** ISO 3345:1975 _(verified: appears in the quote below)_ - **Item title:** Wood — Determination of ultimate tensile stress parallel to grain _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13061-6:2014 | ISO/CD 13061-6 - **Withdrawn / published date:** 1975-09-01 _(verified: appears in the quote below)_ > 8629,IS,,ISO 3345:1975,Wood — Determination of ultimate tensile stress parallel to grain,Bois — Détermination de la contrainte de rupture en traction parallèle aux fibres,1975-09-01,1,['79.040'],ISO/TC 218,9599,,"[60068,52508]","['en','fr']",2,"The principle consists in the application of a gradually increasing load to a test piece. Apparatus, preparation of test piece, procedure and calculation and expression of results are described in detail. References are made to ISO 3129 and ISO 3130.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3346:1975 - **Identifier:** ISO 3346:1975 _(verified: appears in the quote below)_ - **Item title:** Wood — Determination of ultimate tensile stress perpendicular to grain _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13061-7:2014 | ISO/WD 13061-7 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 8630,IS,,ISO 3346:1975,Wood — Determination of ultimate tensile stress perpendicular to grain,Bois — Détermination de la contrainte de rupture en traction perpendiculaire aux fibres,1975-12-01,1,['79.040'],ISO/TC 218,9599,,"[60069,52509]","['en','fr']",2,"Covers the radial and tangential directions. The principle consists in the application of a gradually increasing load to a test piece. Apparatus, preparation of test piece, procedure and calculation and expression of results are described in detail. References are made to ISO 3129 and ISO 3130.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3347:1976 - **Identifier:** ISO 3347:1976 _(verified: appears in the quote below)_ - **Item title:** Wood — Determination of ultimate shearing stress parallel to grain _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 13061-8 | ISO 13061-8:2022 - **Withdrawn / published date:** 1976-01-01 _(verified: appears in the quote below)_ > 8631,IS,,ISO 3347:1976,Wood — Determination of ultimate shearing stress parallel to grain,Bois — Détermination de la contrainte de rupture en cisaillement parallèle aux fibres,1976-01-01,1,['79.040'],ISO/TC 218,9599,,"[52510,79914]","['en','fr']",2,"The method described is based on applying a gradually increasing compressive load, either along the radial or along the tangential surface of a test piece. References are made to ISO 3129 and ISO 3130.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3348:1975 - **Identifier:** ISO 3348:1975 _(verified: appears in the quote below)_ - **Item title:** Wood — Determination of impact bending strength _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13061-10:2017 | ISO/WD 13061-10 - **Withdrawn / published date:** 1975-08-01 _(verified: appears in the quote below)_ > 8632,IS,,ISO 3348:1975,Wood — Determination of impact bending strength,Bois — Détermination de la résilience en flexion,1975-08-01,1,['79.040'],ISO/TC 218,9599,,"[60072,52513]","['en','fr']",2,Specifies a method using a pendulum impact testing machine. The test piece is tested for cross-sectional bending under dynamic load application. References are made to ISO 3129 and ISO 3130.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3349:1975 - **Identifier:** ISO 3349:1975 _(verified: appears in the quote below)_ - **Item title:** Wood — Determination of modulus of elasticity in static bending _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13061-4:2014 | ISO/WD 13061-4 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 8633,IS,,ISO 3349:1975,Wood — Determination of modulus of elasticity in static bending,Bois — Détermination du module d'élasticité en flexion statique,1975-12-01,1,['79.040'],ISO/TC 218,9599,,"[60066,52506]","['en','fr']",3,Method described measures the deflection in the net bending area during application of a gradually increasing load to a test piece within the region of proportionality of the load and deflection.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 335:1974 - **Identifier:** ISO 335:1974 _(verified: appears in the quote below)_ - **Item title:** Hard coal — Determination of caking power — Roga test _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 335 - **Withdrawn / published date:** 1974-10-01 _(verified: appears in the quote below)_ > 4281,IS,,ISO 335:1974,Hard coal — Determination of caking power — Roga test,Houille — Détermination du pouvoir agglutinant — Essai Roga,1974-10-01,1,['73.040'],ISO/TC 27,9599,,[1851],"['en','fr']",4,The caking power of a coal is defined by the mechanical strength of the crucible coke obtained by carbonization under standard conditions of an intimate mixture of 1 g of coal and 5 g of standard anthrazite. The crucible coke obtained is then submitted to a drum test in a strictly prescribed manner and the Roga Index is calculated from the results.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3350:1975 - **Identifier:** ISO 3350:1975 _(verified: appears in the quote below)_ - **Item title:** Wood — Determination of static hardness _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 13061-12 | ISO 13061-12:2017 - **Withdrawn / published date:** 1975-08-01 _(verified: appears in the quote below)_ > 8634,IS,,ISO 3350:1975,Wood — Determination of static hardness,Bois — Détermination de la dureté statique,1975-08-01,1,['79.040'],ISO/TC 218,9599,,"[52515,60074]","['en','fr']",2,Specifies a method that determines the resistance of a test piece to the penetration of a plunger to a specified depth under a gradually increasing load. References are made to ISO 3129 and ISO 3130.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3351:1975 - **Identifier:** ISO 3351:1975 _(verified: appears in the quote below)_ - **Item title:** Wood — Determination of resistance to impact indentation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 13061-11:2017 | ISO/WD 13061-11 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 8635,IS,,ISO 3351:1975,Wood — Determination of resistance to impact indentation,Bois — Détermination de la résistance à la pénétration dynamique,1975-12-01,1,['79.040'],ISO/TC 218,9599,,"[60073,52514]","['en','fr']",2,The method described determines the resistance of the surface layer of a test piece to impact indentation by a steel ball being dropped from a height of 500 1 mm. With a pressing mechanism the test piece is held against a massive base-plate.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3353-1:2002 - **Identifier:** ISO 3353-1:2002 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Lead and runout threads — Part 1: Rolled external threads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3353-1:2020 - **Withdrawn / published date:** 2002-08-22 _(verified: appears in the quote below)_ > 31057,IS,,ISO 3353-1:2002,Aerospace — Lead and runout threads — Part 1: Rolled external threads,"Aéronautique et espace — Filets incomplets, débuts et fins de filets — Partie 1: Filetages extérieurs roulés",2002-08-22,1,['49.030.10'],ISO/TC 20/SC 4,9599,[8638],[79753],"['en','fr']",11,"ISO 3353-1:2002 specifies the lead and runout requirements for rolled external threads for aerospace construction, and the inspection method to be used in case of dispute.
It is applicable whenever it is referenced in a definition document.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3353:1976 - **Identifier:** ISO 3353:1976 _(verified: appears in the quote below)_ - **Item title:** Aerospace construction — Rolled threads — Runout and lead threads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3353:1992 - **Withdrawn / published date:** 1976-10-01 _(verified: appears in the quote below)_ > 8637,IS,,ISO 3353:1976,Aerospace construction — Rolled threads — Runout and lead threads,Constructions aérospatiales — Filetages roulés — Filets incomplets côté tige (ou tête) et côté extrémité,1976-10-01,1,['49.030.10'],ISO/TC 20/SC 4,9599,,[8638],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3353:1992 - **Identifier:** ISO 3353:1992 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Rolled threads for bolts — Lead and runout requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3353-1:2002 | ISO 3353-2:2002 - **Withdrawn / published date:** 1992-10-21 _(verified: appears in the quote below)_ > 8638,IS,,ISO 3353:1992,Aerospace — Rolled threads for bolts — Lead and runout requirements,Aéronautique et espace — Filetages roulés des vis — Filets incomplets côté tige (ou tête) et côté extrémité,1992-10-21,2,['49.030.10'],ISO/TC 20/SC 4,9599,[8637],"[31057,31058]","['en','fr']",9,Specifies appropriate dimensions and the inspection method to be used in case of dispute.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3353-2:2002 - **Identifier:** ISO 3353-2:2002 _(verified: appears in the quote below)_ - **Item title:** Aerospace — Lead and runout threads — Part 2: Internal threads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3353-2:2020 - **Withdrawn / published date:** 2002-08-22 _(verified: appears in the quote below)_ > 31058,IS,,ISO 3353-2:2002,Aerospace — Lead and runout threads — Part 2: Internal threads,"Aéronautique et espace — Filets incomplets, débuts et fins de filets — Partie 2: Filetages intérieurs",2002-08-22,1,['49.030.10'],ISO/TC 20/SC 4,9599,[8638],[79754],"['en','fr']",4,ISO 3353-2:2002 specifies the lead and runout thread and undercut requirements for internal threads (blind tapped holes) for aerospace construction.
It is applicable whenever it is referenced in a definition document.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3354:1975 - **Identifier:** ISO 3354:1975 _(verified: appears in the quote below)_ - **Item title:** Measurement of clean water flow in closed conduits — Velocity-area method using current-meters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3354:1988 - **Withdrawn / published date:** 1975-09-01 _(verified: appears in the quote below)_ > 8639,IS,,ISO 3354:1975,Measurement of clean water flow in closed conduits — Velocity-area method using current-meters,Mesure du débit d'eau propre dans les conduites fermées — Méthode d'exploration du champ des vitesses au moyen de moulinets,1975-09-01,1,['17.120.10'],ISO/TC 30,9599,,[8640],"['en','fr']",26, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3354:1988 - **Identifier:** ISO 3354:1988 _(verified: appears in the quote below)_ - **Item title:** Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3354:2008 - **Withdrawn / published date:** 1988-07-14 _(verified: appears in the quote below)_ > 8640,IS,,ISO 3354:1988,Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions,"Mesure de débit d'eau propre dans les conduites fermées — Méthode d'exploration du champ des vitesses dans les conduites en charge et dans le cas d'un écoulement régulier, au moyen de moulinets",1988-07-14,2,['17.120.10'],ISO/TC 30/SC 5,9599,[8639],[50326],"['en','fr']",37,"The described method is to be used under the following conditions: a) the velocity distribution is regular; b) the fluid is water which is clean or considered to be clean; c) the conduit is full; d) the flow is steady. Deals in particular with the tech Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3355:1975 - **Identifier:** ISO 3355:1975 _(verified: appears in the quote below)_ - **Item title:** Shoe sizes — System of length grading (for use in the Mondopoint system) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 9407:1991 - **Withdrawn / published date:** 1975-01-01 _(verified: appears in the quote below)_ > 8641,IS,,ISO 3355:1975,Shoe sizes — System of length grading (for use in the Mondopoint system),Pointures des chaussures — Système de gradation des longueurs (pour emploi dans le système Mondopoint),1975-01-01,1,['61.060'],ISO/TC 137,9599,,[17106],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3356:1975 - **Identifier:** ISO 3356:1975 _(verified: appears in the quote below)_ - **Item title:** Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder — Determination of phosphatase activity (Reference method) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3356:2009 | ISO/WD 3356 - **Withdrawn / published date:** 1975-07-01 _(verified: appears in the quote below)_ > 8642,IS,,ISO 3356:1975,"Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder — Determination of phosphatase activity (Reference method)","Lait et lait sec, babeurre et poudre de babeurre, sérum et poudre de sérum — Détermination de l'activité phosphatasique (Méthode de référence)",1975-07-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,"[44539,38484]","['en','fr']",3,
Can be applied for the control of proper pasteurization of the products specified in the title of this standard. Uses a principle of determination based on the dilution of the liquid product or the reconstituted liquid product with a buffer at pH 10.6 containing disodium phenylphosphate and incubation at 37 deg Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 336:1976 - **Identifier:** ISO 336:1976 _(verified: appears in the quote below)_ - **Item title:** Withdrawal of ISO 336-1976 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 4200:1991 - **Withdrawn / published date:** 1976-04-01 _(verified: appears in the quote below)_ > 4282,IS,,ISO 336:1976,Withdrawal of ISO 336-1976,Annulation de l'ISO 336-1976,1976-04-01,2,['23.040.10'],ISO/TC 5,9599,,[9985],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3364:1977 - **Identifier:** ISO 3364:1977 _(verified: appears in the quote below)_ - **Item title:** Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3364:1985 - **Withdrawn / published date:** 1977-07-01 _(verified: appears in the quote below)_ > 8650,IS,,ISO 3364:1977,Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions,"Plaquettes amovibles en carbures métalliques, à trou de fixation cylindrique — Dimensions",1977-07-01,1,['25.100.01'],ISO/TC 29,9599,,[8651],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3364:1985 - **Identifier:** ISO 3364:1985 _(verified: appears in the quote below)_ - **Item title:** Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3364:1997 - **Withdrawn / published date:** 1985-07-25 _(verified: appears in the quote below)_ > 8651,IS,,ISO 3364:1985,"Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions",Plaquettes amovibles en métaux-durs (carbures métalliques) avec arrondi de pointe et trou de fixation cylindrique — Dimensions,1985-07-25,2,['25.100.01'],ISO/TC 29/SC 9,9599,[8650],[23733],"['en','fr']",9, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3364:1997 - **Identifier:** ISO 3364:1997 _(verified: appears in the quote below)_ - **Item title:** Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3364:2011 - **Withdrawn / published date:** 1997-01-30 _(verified: appears in the quote below)_ > 23733,IS,,ISO 3364:1997,"Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions",Plaquettes amovibles en métaux-durs (carbures métalliques) avec arrondi de pointe et trou de fixation cylindrique — Dimensions,1997-01-30,3,['25.100.01'],ISO/TC 29/SC 9,9599,[8651],[53792],"['en','fr']",14,"
Gives the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° clearance. Replaces the second edition. Subclause 7.5 has been added and annexes A and C have been completed.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3364:2011 - **Identifier:** ISO 3364:2011 _(verified: appears in the quote below)_ - **Item title:** Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3364:2017 - **Withdrawn / published date:** 2011-12-15 _(verified: appears in the quote below)_ > 53792,IS,,ISO 3364:2011,"Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions",Plaquettes amovibles en métaux-durs (carbures métalliques) avec arrondi de pointe et trou de fixation cylindrique — Dimensions,2011-12-15,4,['25.100.01'],ISO/TC 29/SC 9,9599,[23733],[69204],"['en','fr']",14,"ISO 3364:2011 specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal clearance. These inserts are primarily intended to be mounted by top and hole clamping or by hole clamping alone on turning and boring tools.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3365-1:1977 - **Identifier:** ISO 3365-1:1977 _(verified: appears in the quote below)_ - **Item title:** Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3365:1985 - **Withdrawn / published date:** 1977-07-01 _(verified: appears in the quote below)_ > 8653,IS,,ISO 3365-1:1977,Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts,Plaquettes amovibles en carbures métalliques pour fraises — Dimensions — Partie 1: Plaquettes carrées,1977-07-01,1,['25.100.01'],ISO/TC 29,9599,,[8652],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3365:1985 - **Identifier:** ISO 3365:1985 _(verified: appears in the quote below)_ - **Item title:** Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3365:2016 - **Withdrawn / published date:** 1985-07-25 _(verified: appears in the quote below)_ > 8652,IS,,ISO 3365:1985,"Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions","Plaquettes amovibles en métaux-durs (carbures métalliques) avec arêtes de planage, sans trou de fixation — Dimensions",1985-07-25,2,['25.100.01'],ISO/TC 29/SC 9,9599,"[8653,8654]",[68791],"['en','fr']",12, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3365-2:1980 - **Identifier:** ISO 3365-2:1980 _(verified: appears in the quote below)_ - **Item title:** Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3365:1985 - **Withdrawn / published date:** 1980-05-01 _(verified: appears in the quote below)_ > 8654,IS,,ISO 3365-2:1980,Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts,Plaquettes amovibles en métaux-durs pour fraises — Dimensions — Partie 2: Plaquettes triangulaires,1980-05-01,1,['25.100.01'],ISO/TC 29,9599,,[8652],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3366:1975 - **Identifier:** ISO 3366:1975 _(verified: appears in the quote below)_ - **Item title:** Coated abrasives — General purpose rolls — Any backing — Designation and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3366:1999 - **Withdrawn / published date:** 1975-05-01 _(verified: appears in the quote below)_ > 8656,IS,,ISO 3366:1975,Coated abrasives — General purpose rolls — Any backing — Designation and dimensions,Abrasifs appliqués — Rouleaux dits d'atelier — Tous supports — Désignation et dimensions,1975-05-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[20539],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3367:1975 - **Identifier:** ISO 3367:1975 _(verified: appears in the quote below)_ - **Item title:** Coated abrasives — Rolls for widths of 50 mm and greater — Any backing — Designation and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 3367 | ISO 3366:1999 - **Withdrawn / published date:** 1975-05-01 _(verified: appears in the quote below)_ > 8657,IS,,ISO 3367:1975,Coated abrasives — Rolls for widths of 50 mm and greater — Any backing — Designation and dimensions,Abrasifs appliqués — Rouleaux de largeurs supérieures ou égales à 50 mm — Tous supports — Désignation et dimensions,1975-05-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,"[28470,20539]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3368:1975 - **Identifier:** ISO 3368:1975 _(verified: appears in the quote below)_ - **Item title:** Coated abrasives — Cloth rolls up to and including 40 mm width — Designation and dimensions _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3366:1999 | ISO/WD 3368 - **Withdrawn / published date:** 1975-05-01 _(verified: appears in the quote below)_ > 8658,IS,,ISO 3368:1975,Coated abrasives — Cloth rolls up to and including 40 mm width — Designation and dimensions,Abrasifs appliqués — Rouleaux en toile de largeurs inférieures ou égales à 40 mm — Désignation et dimensions,1975-05-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,"[20539,28471]","['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3369:1975 - **Identifier:** ISO 3369:1975 _(verified: appears in the quote below)_ - **Item title:** Impermeable sintered metal materials and hardmetals — Determination of density _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3369:2006 - **Withdrawn / published date:** 1975-09-01 _(verified: appears in the quote below)_ > 8659,IS,,ISO 3369:1975,Impermeable sintered metal materials and hardmetals — Determination of density,Matériaux en métal fritté imperméable et métaux-durs — Détermination de la masse volumique,1975-09-01,1,['77.160'],ISO/TC 119/SC 3,9599,,[44435],"['en','fr']",3,"For determination of density of permeable sintered metal materials see ISO 2738. Specifies principle, apparatus, sampling, procedure, expression of results and test report. The two figures illustrate the weighing in water and the weighing in air.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3372:1975 - **Identifier:** ISO 3372:1975 _(verified: appears in the quote below)_ - **Item title:** Shipbuilding — Inland vessels — Mushroom-type ventilator heads _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 3372 - **Withdrawn / published date:** 1975-05-01 _(verified: appears in the quote below)_ > 8661,IS,,ISO 3372:1975,Shipbuilding — Inland vessels — Mushroom-type ventilator heads,"Construction navale — Bateaux de navigation intérieure — Aérateurs, type champignon",1975-05-01,1,['47.060'],ISO/TC 8/SC 7,9599,[3674],[8662],"['en','fr']",2,Defines two types of mushroom-type ventilator heads used on vessels for inland waterways and specifies their principal dimensions.
Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3374:1980 - **Identifier:** ISO 3374:1980 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Glass mats — Determination of mass per unit area _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3374:1990 - **Withdrawn / published date:** 1980-08-01 _(verified: appears in the quote below)_ > 8664,IS,,ISO 3374:1980,Textile glass — Glass mats — Determination of mass per unit area,Verre textile — Mats de verre — Détermination de la masse surfacique ou 'grammage',1980-08-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[8665],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3374:1990 - **Identifier:** ISO 3374:1990 _(verified: appears in the quote below)_ - **Item title:** Textile glass mats — Determination of mass per unit area _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3374:2000 - **Withdrawn / published date:** 1990-11-08 _(verified: appears in the quote below)_ > 8665,IS,,ISO 3374:1990,Textile glass mats — Determination of mass per unit area,Verre textile — Mats — Détermination de la masse surfacique ou 'grammage',1990-11-08,2,['59.100.10'],ISO/TC 61/SC 13,9599,[8664],[26877],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3375:1975 - **Identifier:** ISO 3375:1975 _(verified: appears in the quote below)_ - **Item title:** Textile glass — Determination of stiffness of rovings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3375:2009 - **Withdrawn / published date:** 1975-12-01 _(verified: appears in the quote below)_ > 8666,IS,,ISO 3375:1975,Textile glass — Determination of stiffness of rovings,Verre textile — Détermination de la rigidité des stratifils,1975-12-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[52868],"['en','fr']",2,"Suspension of a test piece of roving, 500 mm long, at its centre over a hook with specified dimensions and measurement of the separation of the two hanging ends of the test specimen at a standard distance of 60 mm below the suspension point. A suitable roving stiffness tester is shown in a figure.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 3376:1976 - **Identifier:** ISO 3376:1976 _(verified: appears in the quote below)_ - **Item title:** Leather — Determination of tensile strength and elongation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 3376:2002 - **Withdrawn / published date:** 1976-12-01 _(verified: appears in the quote below)_ > 8667,IS,,ISO 3376:1976,Leather — Determination of tensile strength and elongation,Cuir — Détermination de la résistance à la traction et de l'allongement,1976-12-01,1,['59.140.30'],IULTCS,9599,,[24031],"['en','fr']",3,"Delivers the principles for test methods, which are applicable to all types of leather. Specified apparatus are press knives, thickness gauge and tensile strength testing apparatus. Test pieces are shown by figure.
" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv [page 101](https://referencesource.org/iso-standard-supersessions/p/101/) · [all 246 pages](https://referencesource.org/iso-standard-supersessions/) · [page 103](https://referencesource.org/iso-standard-supersessions/p/103/) Last verified: 2026-08-05. Review by: 2027-02-02.