# 933 — Fastener standard equivalences: DIN to ISO / EN crossover For 933, fastener description is Hexagon head screws – Product grades A and B; iso equivalent is 4017; interchangeability is Nominal size extended; width across flats according to DIN ISO 272 included; modification notes is Nominal size extended; width across flats according to DIN ISO 272 included, verified against its source on 2026-08-12. - **DIN standard:** 933 _(verified: appears in the quote below)_ - **Fastener description:** Hexagon head screws – Product grades A and B _(verified: appears in the quote below)_ - **ISO equivalent:** 4017 _(verified: appears in the quote below)_ - **Interchangeability:** Nominal size extended; width across flats according to DIN ISO 272 included _(verified: appears in the quote below)_ - **Modification notes:** Nominal size extended; width across flats according to DIN ISO 272 included _(verified: appears in the quote below)_ - **EN ISO number:** 4017 _(per dinmedia.de, not stated by the source above)_ ## What the source says > 933 | 4017 | 24017 | 4017 | 4017 | 2001-03 | Hexagon head screws – Product grades A and B | Nominal size extended; width across flats according to DIN ISO 272 included | ## Sources disagree More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from. ### Fastener description fullerfasteners.com says fastener description is **Hexagon head screws – Product grades A and B**, as of 2026-08-12. > 933 | 4017 | 24017 | 4017 | 4017 | 2001-03 | Hexagon head screws – Product grades A and B | Nominal size extended; width across flats according to DIN ISO 272 included | Source: https://fullerfasteners.com/tech/din-iso-en-crossover-chart/ monsterbolts.com says fastener description is **Full thread hex bolts.**, as of 2026-08-12. > DIN 933 | ISO 4017 | Fully interchangeable Source: https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners trfastenings.com says fastener description is **M1,6 to M52 Hexagon Cap Screws fully threaded - product grades 8.8**, as of 2026-08-12. > DIN 933 | ISO 4017 | BS3692 | M1,6 to M52 Hexagon Cap Screws fully threaded - product grades 8.8 | Source: https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards dinmedia.de says fastener description is **M 1,6 to M 52 hexagon head screws threaded up to the head; product grades A and B**, as of 2026-08-12. > DIN 933:1983-12 . This document has been replaced by: DIN EN 24017:1992-02 , DIN EN ISO 4017:2001-03 . Source: https://www.dinmedia.de/en/standard/din-933/3071389 wuerth.de says fastener description is **Sechskantschrauben mit Vollgewinde**, as of 2026-08-12. > Die Normen DIN 931 und DIN 933 sind schon vor vielen Jahren zurückgezogen wurden. Die entsprechenden ISO – Nachfolgenormen ISO 4014 und ISO 4017 entsprechen weitestgehend den zurückgezogenen DIN – Normen. Dadurch sind grundsätzliche keine Einschränkungen bei der Verwendungen dieser ISO – Normen zu erwarten. Allerdings sollte beachtet werden, dass sich bei den Abmessungen M10, M12, M14 und M22 die Schlüsselweiten geändert haben und somit andere Verschraubungswerkzeuge eingesetzt werden müssen. Source: https://www.wuerth.de/web/de/awkg/kompetenz/din_iso_normteile/din-933-931-iso-4014-4017-sechskantschrauben.php ### Interchangeability fullerfasteners.com says interchangeability is **Nominal size extended; width across flats according to DIN ISO 272 included**, as of 2026-08-12. > 933 | 4017 | 24017 | 4017 | 4017 | 2001-03 | Hexagon head screws – Product grades A and B | Nominal size extended; width across flats according to DIN ISO 272 included | Source: https://fullerfasteners.com/tech/din-iso-en-crossover-chart/ monsterbolts.com says interchangeability is **Fully interchangeable**, as of 2026-08-12. > DIN 933 | ISO 4017 | Fully interchangeable Source: https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners wuerth.de says interchangeability is **weitestgehend**, as of 2026-08-12. > Die Normen DIN 931 und DIN 933 sind schon vor vielen Jahren zurückgezogen wurden. Die entsprechenden ISO – Nachfolgenormen ISO 4014 und ISO 4017 entsprechen weitestgehend den zurückgezogenen DIN – Normen. Dadurch sind grundsätzliche keine Einschränkungen bei der Verwendungen dieser ISO – Normen zu erwarten. Allerdings sollte beachtet werden, dass sich bei den Abmessungen M10, M12, M14 und M22 die Schlüsselweiten geändert haben und somit andere Verschraubungswerkzeuge eingesetzt werden müssen. Source: https://www.wuerth.de/web/de/awkg/kompetenz/din_iso_normteile/din-933-931-iso-4014-4017-sechskantschrauben.php ### Modification notes fullerfasteners.com says modification notes is **Nominal size extended; width across flats according to DIN ISO 272 included**, as of 2026-08-12. > 933 | 4017 | 24017 | 4017 | 4017 | 2001-03 | Hexagon head screws – Product grades A and B | Nominal size extended; width across flats according to DIN ISO 272 included | Source: https://fullerfasteners.com/tech/din-iso-en-crossover-chart/ wuerth.de says modification notes is **bei den Abmessungen M10, M12, M14 und M22 die Schlüsselweiten geändert haben und somit andere Verschraubungswerkzeuge eingesetzt werden müssen**, as of 2026-08-12. > Die Normen DIN 931 und DIN 933 sind schon vor vielen Jahren zurückgezogen wurden. Die entsprechenden ISO – Nachfolgenormen ISO 4014 und ISO 4017 entsprechen weitestgehend den zurückgezogenen DIN – Normen. Dadurch sind grundsätzliche keine Einschränkungen bei der Verwendungen dieser ISO – Normen zu erwarten. Allerdings sollte beachtet werden, dass sich bei den Abmessungen M10, M12, M14 und M22 die Schlüsselweiten geändert haben und somit andere Verschraubungswerkzeuge eingesetzt werden müssen. Source: https://www.wuerth.de/web/de/awkg/kompetenz/din_iso_normteile/din-933-931-iso-4014-4017-sechskantschrauben.php ## Source - https://fullerfasteners.com/tech/din-iso-en-crossover-chart/ - https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners - https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards - https://www.dinmedia.de/en/standard/din-933/3071389 - https://www.wuerth.de/web/de/awkg/kompetenz/din_iso_normteile/din-933-931-iso-4014-4017-sechskantschrauben.php Last verified: 2026-08-12. Review by: 2028-08-11. Part of [Fastener standard equivalences: DIN to ISO / EN crossover](https://referencesource.org/fastener-thread-standard-equivalence/).