# DIN 1 — Cone Pins, untempered — ISO 2339

For DIN 1, fastener description is Cone Pins, untempered; iso equivalent is 2339, verified against its source on 2026-10-12.

- **DIN standard:** 1 _(verified: appears in the quote below)_
- **Fastener description:** Cone Pins, untempered _(verified: appears in the quote below)_
- **ISO equivalent:** 2339 _(verified: appears in the quote below)_
- **EN ISO number:** 22339 _(per fullerfasteners.com, not stated by the source above)_
- **Date of current standard/modified:** 1992-10 _(per fullerfasteners.com, not stated by the source above)_
- **Title of replacement standard:** Unhardened taper pins _(per fullerfasteners.com, not stated by the source above)_
- **Modification notes:** Nominal length redefined (with round end) _(per fullerfasteners.com, not stated by the source above)_

## What the source says

> DIN 1 | ISO 2339 | | Cone Pins, untempered |

## Sources disagree

More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from.

### Fastener description

trfastenings.com says fastener description is **Cone Pins, untempered**, as of 2026-09-21.

> DIN 1 | ISO 2339 | | Cone Pins, untempered |

Source: https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards

fullerfasteners.com says fastener description is **Unhardened taper pins**, as of 2026-09-22.

> Unhardened taper pins | 1 | | 22339 | | 2339 | 1992-10 | Unhardened taper pins | Nominal length redefined (with round end) |

Source: https://fullerfasteners.com/tech/din-iso-en-crossover-chart/


## Source

- https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
- https://fullerfasteners.com/tech/din-iso-en-crossover-chart/

Last verified: 2026-10-12. Review by: 2028-10-11.
Part of [Fastener standard equivalences: DIN to ISO / EN crossover](https://referencesource.org/fastener-thread-standard-equivalence/).