DIN 985
For DIN 985, iso standard is ISO 10511; part is Nylon Insert Lock Nut (thin); interchangeability verdict is Check spec, verified against its source on 2026-08-05.
- DIN standard
- DIN 985 verified
- ISO standard
- ISO 10511 verified
- Part
- Nylon Insert Lock Nut (thin) verified
- Interchangeability verdict
- Check spec verified
What the source says
Nylon Insert Lock Nut (thin) | DIN 985 | ISO 10511 | Check spec | Thin pattern; verify heights.
— monsterbolts.com, retrieved 2026-08-05
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Part
monsterbolts.com says part is Nylon Insert Lock Nut (thin), as of 2026-08-05.
Nylon Insert Lock Nut (thin) | DIN 985 | ISO 10511 | Check spec | Thin pattern; verify heights.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says part is Prevailing torque type Hexagon Thin Nuts with non-metallic insert, as of 2026-08-05.
DIN 985 | ISO 10511 | | Prevailing torque type Hexagon Thin Nuts with non-metallic insert |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards