DIN 6926
For DIN 6926, iso standard is DIN EN 1663, 1666; part is Prevailing Torque Flange Nut; interchangeability verdict is Check spec, verified against its source on 2026-08-05.
- DIN standard
- DIN 6926 verified
- ISO standard
- DIN EN 1663, 1666 verified
- Part
- Prevailing Torque Flange Nut verified
- Interchangeability verdict
- Check spec verified
What the source says
Prevailing Torque Flange Nut | DIN 6926 | DIN EN 1663, 1666 | Check spec | Deformation style/serrations differ.
— monsterbolts.com, retrieved 2026-08-05
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
ISO standard
monsterbolts.com says iso standard is DIN EN 1663, 1666, as of 2026-08-05.
Prevailing Torque Flange Nut | DIN 6926 | DIN EN 1663, 1666 | Check spec | Deformation style/serrations differ.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says iso standard is ISO 7043, as of 2026-08-05.
DIN 6926 | ISO 7043 | | Prevailing torque type Hexagon Nuts with flange and with non-metallic insert |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Part
monsterbolts.com says part is Prevailing Torque Flange Nut, as of 2026-08-05.
Prevailing Torque Flange Nut | DIN 6926 | DIN EN 1663, 1666 | Check spec | Deformation style/serrations differ.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says part is Prevailing torque type Hexagon Nuts with flange and with non-metallic insert, as of 2026-08-05.
DIN 6926 | ISO 7043 | | Prevailing torque type Hexagon Nuts with flange and with non-metallic insert |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards