DIN 6923
For DIN 6923, iso standard is DIN EN 1661; part is Hex Nut with Flange; interchangeability verdict is Check spec, verified against its source on 2026-08-05.
- DIN standard
- DIN 6923 verified
- ISO standard
- DIN EN 1661 verified
- Part
- Hex Nut with Flange verified
- Interchangeability verdict
- Check spec verified
What the source says
Hex Nut with Flange | DIN 6923 | DIN EN 1661 | Check spec | Flange geometry/tolerance.
— monsterbolts.com, retrieved 2026-08-05
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
ISO standard
monsterbolts.com says iso standard is DIN EN 1661, as of 2026-08-05.
Hex Nut with Flange | DIN 6923 | DIN EN 1661 | Check spec | Flange geometry/tolerance.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says iso standard is ISO 1661, as of 2026-08-05.
DIN 6923 | ISO 1661 | | Hexagon Nuts with flange |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Part
monsterbolts.com says part is Hex Nut with Flange, as of 2026-08-05.
Hex Nut with Flange | DIN 6923 | DIN EN 1661 | Check spec | Flange geometry/tolerance.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says part is Hexagon Nuts with flange, as of 2026-08-05.
DIN 6923 | ISO 1661 | | Hexagon Nuts with flange |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards