DIN 438
For DIN 438, iso standard is DIN EN 27436; part is Slotted Set Screw – Cup; interchangeability verdict is Check spec, verified against its source on 2026-08-05.
- DIN standard
- DIN 438 verified
- ISO standard
- DIN EN 27436 verified
- Part
- Slotted Set Screw – Cup verified
- Interchangeability verdict
- Check spec verified
What the source says
Slotted Set Screw – Cup | DIN 438 | DIN EN 27436 | Check spec | Legacy to EN conversion.
— monsterbolts.com, retrieved 2026-08-05
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
ISO standard
monsterbolts.com says iso standard is DIN EN 27436, as of 2026-08-05.
Slotted Set Screw – Cup | DIN 438 | DIN EN 27436 | Check spec | Legacy to EN conversion.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says iso standard is ISO 7436, as of 2026-08-05.
DIN 438 | ISO 7436 | | Slotted Set Screws with cup point |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Part
monsterbolts.com says part is Slotted Set Screw – Cup, as of 2026-08-05.
Slotted Set Screw – Cup | DIN 438 | DIN EN 27436 | Check spec | Legacy to EN conversion.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says part is Slotted Set Screws with cup point, as of 2026-08-05.
DIN 438 | ISO 7436 | | Slotted Set Screws with cup point |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards