# P01 — Carbide insert grade cross-reference by ISO application group and manufacturer

For P01, manufacturer is Kennametal; grade designation(s) is KC9010 KC910, recorded from its source on 2026-08-11.

- **ISO application code:** P01 _(verified: appears in the quote below)_
- **Manufacturer:** Kennametal _(our reading, not quoted from the source)_
- **Grade designation(s):** KC9010 KC910 _(verified: appears in the quote below)_

## What the source says

> P01 | R-100 R-200 | UE6005 F7010 | GC4015 GC4215 | TX110 | AC1000 | T7005 TD905 T715X | KC9010 KC910 |

## Sources disagree

More than one authority states this, and they do not state the same
thing. Both are reproduced with the source each came from.

### Grade designation(s)

romaycorp.com says grade designation(s) is **KC9010 KC910**, as of 2026-08-11.

> P01 | R-100 R-200 | UE6005 F7010 | GC4015 GC4215 | TX110 | AC1000 | T7005 TD905 T715X | KC9010 KC910 |

Source: https://romaycorp.com/charts/carbide-comparison-chart/

aceratool.com says grade designation(s) is **KC910**, as of 2026-08-11.

> P01 | | GC4005 GC4205 | NC3010 | | WAP01 | UE6005 | AC700G | T9005 | CA5505 | JC110V | HG3305 | KC910 |

Source: https://www.aceratool.com/carbide-insert-grades-chart/


## Source

- https://romaycorp.com/charts/carbide-comparison-chart/
- https://www.aceratool.com/carbide-insert-grades-chart/

Last verified: 2026-08-11. Review by: 2028-08-10.
Part of [Carbide insert grade cross-reference by ISO application group and manufacturer](https://referencesource.org/carbide-insert-grade-cross-reference/).