{
  "name": "ASME Code Section stamps and National Board stamps required for boilers and pressure vessels in each US state, Canadian province and US city, county or territory",
  "description": "Which ASME Code Section stamps and which National Board stamps each jurisdiction requires on a boiler or pressure vessel, from the National Board Synopsis (NB-370). A manufacturer or repair shop planning to ship or service equipment in a new jurisdiction needs this before the vessel leaves the shop -- installing a vessel without the required stamps means rejection by the state inspector. The chart covers three groups, and so does this dataset: the 50 US states, the Canadian provinces and territories, and the 16 US cities, counties and territories that set their own stamping rules -- Chicago, New York City, Los Angeles, Seattle, Milwaukee, New Orleans, Washington D.C., Puerto Rico and others. A city can differ sharply from the state around it: Detroit requires no National Board stamp where Michigan requires R; Miami and Miami-Dade County require neither an NB nor an ASME stamp where Florida requires R,VR. Requirements vary just as sharply between states: Alabama requires all ASME stamps and all NB stamps; Idaho requires none of either; California requires all ASME stamps but no NB stamp except at refineries (R stamp); the Canadian provinces generally 'accept' rather than 'require' the NB R stamp for equipment manufactured outside Canada. Each record is one jurisdiction with its NB stamp requirements and ASME stamp requirements listed as the synopsis prints them. Answers 'what ASME stamps does Arizona require', 'does Idaho require a National Board stamp', 'which states require the NB R stamp', 'do I need an ASME U stamp to install a pressure vessel in South Carolina', 'what stamps does a boiler repair shop need in Texas', 'does Chicago have its own boiler stamping requirements', 'what stamps does New York City require'.",
  "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/",
  "licence": "Source is the National Board of Boiler and Pressure Vessel Inspectors Synopsis (NB-370), a freely published compilation. We take facts plus short attributed quotes. The National Board is a not-for-profit organization; its Synopsis is published for public use.",
  "last_verified": "2026-08-28",
  "stale_after": "2027-08-28",
  "sources": [
    "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf"
  ],
  "records": [
    {
      "jurisdiction": "Alabama",
      "national_board_stamps": "All",
      "asme_stamps": "All",
      "country": "United States",
      "id": "alabama",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/alabama/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Alabama          All                     All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Alaska",
      "national_board_stamps": "R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "alaska",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/alaska/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Alaska           R,VR                    All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Alberta",
      "national_board_stamps": "R*",
      "asme_stamps": "All when manufactured outside Canada, and all Section VIII, Division 2 and 3 pressure vessels",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "alberta",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/alberta/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Alberta R* All when manufactured outside Canada, and all Section VIII, Division 2 and 3 pressure vessels",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Albuquerque, New Mexico",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, S, U, UM, UV,V",
      "country": "United States",
      "id": "albuquerque-new-mexico",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/albuquerque-new-mexico/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Albuquerque, New Mexico R,VR               A, E, H, HLW, HV, M, S, U, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Arizona",
      "national_board_stamps": "NB, R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S, U, UM, UV, UD, U2, U3, UV3,V",
      "country": "United States",
      "id": "arizona",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/arizona/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Arizona          NB, R,VR                A, E, H, HLW, HV, M, PP, S, U, UM, UV, UD, U2, U3, UV3,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Arkansas",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "arkansas",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/arkansas/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Arkansas         NR, R,VR                All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "British Columbia",
      "national_board_stamps": "R,VR",
      "asme_stamps": "As per adopted codes",
      "country": "Canada",
      "id": "british-columbia",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/british-columbia/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "British Columbia            R,VR                      As per adopted codes",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Buffalo, New York",
      "national_board_stamps": "R,VR",
      "asme_stamps": "H, S, U",
      "country": "United States",
      "id": "buffalo-new-york",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/buffalo-new-york/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Buffalo, New York          R,VR            H, S, U",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "California",
      "national_board_stamps": "None***",
      "asme_stamps": "All",
      "footnotes": "***Except for refinery and oilfield locations require an R stamp.",
      "country": "United States",
      "id": "california",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/california/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "California       None***                 All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Chicago, Illinois",
      "national_board_stamps": "All",
      "asme_stamps": "All",
      "country": "United States",
      "id": "chicago-illinois",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/chicago-illinois/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Chicago, Illinois          All             All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Colorado",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "colorado",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/colorado/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Colorado         NR, R,VR                All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Connecticut",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, S,V",
      "country": "United States",
      "id": "connecticut",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/connecticut/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Connecticut      R,VR                    A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, S,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Delaware",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "delaware",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/delaware/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Delaware         NR, R,VR                All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Detroit, Michigan",
      "national_board_stamps": "None",
      "asme_stamps": "All",
      "country": "United States",
      "id": "detroit-michigan",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/detroit-michigan/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Detroit, Michigan          None            All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Florida",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S,V",
      "country": "United States",
      "id": "florida",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/florida/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Florida          R,VR                    A, E, H, HLW, HV, M, PP, S,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Georgia",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, RP, S, U, U2, U3, UM, UV,V",
      "country": "United States",
      "id": "georgia",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/georgia/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Georgia          NR, R,VR                A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, RP, S, U, U2, U3, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Hawaii",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S, U, UM, UV,V",
      "country": "United States",
      "id": "hawaii",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/hawaii/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Hawaii           R,VR                    A, E, H, HLW, HV, M, PP, S, U, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Idaho",
      "national_board_stamps": "None",
      "asme_stamps": "None",
      "country": "United States",
      "id": "idaho",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/idaho/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Idaho            None                    None",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Illinois",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, N,* NA,* NPT,* NV,* PP, RP, S, U, U2, UM, UV,V",
      "footnotes": "*Comes under the jurisdiction of the Illinois Emergency Management Agency.",
      "country": "United States",
      "id": "illinois",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/illinois/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Illinois         R,VR                    A, E, H, HLW, HV, M, N,* NA,* NPT,* NV,* PP, RP, S, U, U2, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Indiana",
      "national_board_stamps": "NR, R",
      "asme_stamps": "A, E, H, HLW, HV, M, N, NA, NPT, PP, S, U, U2, U3, UM, UV,V",
      "country": "United States",
      "id": "indiana",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/indiana/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Indiana          NR, R                   A, E, H, HLW, HV, M, N, NA, NPT, PP, S, U, U2, U3, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Iowa",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, N, NA, NPT, PP, S, U, U2, U3, UM, UV,V",
      "country": "United States",
      "id": "iowa",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/iowa/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Iowa             R,VR                    A, E, H, HLW, HV, M, N, NA, NPT, PP, S, U, U2, U3, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Kansas",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S, U, UM,V",
      "country": "United States",
      "id": "kansas",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/kansas/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Kansas           R,VR                    A, E, H, HLW, HV, M, PP, S, U, UM,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Kentucky",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, PP, S, U, UV,V",
      "country": "United States",
      "id": "kentucky",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/kentucky/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Kentucky         R,VR                    A, E, H, HLW, HV, PP, S, U, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Los Angeles, California",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "A, H, HLW, HV, M, PP, S, U, UM, UV,V",
      "country": "United States",
      "id": "los-angeles-california",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/los-angeles-california/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Los Angeles, California    NR, R,VR        A, H, HLW, HV, M, PP, S, U, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Louisiana",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, S",
      "country": "United States",
      "id": "louisiana",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/louisiana/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Louisiana        R,VR                    A, E, H, HLW, HV, M, S",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Maine",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, RP, S, U, U2, U3, UM, UV,V",
      "country": "United States",
      "id": "maine",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/maine/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Maine            R,VR                    A, E, H, HLW, HV, M, PP, RP, S, U, U2, U3, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Manitoba",
      "national_board_stamps": "R*,VR",
      "asme_stamps": "Symbol stamp is mandatory when manufactured outside Canada",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "manitoba",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/manitoba/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Manitoba                    R*,VR                     Symbol stamp is mandatory when manufactured outside Canada",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Maryland",
      "national_board_stamps": "R",
      "asme_stamps": "All",
      "country": "United States",
      "id": "maryland",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/maryland/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Maryland         R                       All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Massachusetts",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "H, M, N, NA, NPT, NV, PP, S, U, UM",
      "country": "United States",
      "id": "massachusetts",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/massachusetts/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Massachusetts    NR, R,VR                H, M, N, NA, NPT, NV, PP, S, U, UM",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Miami-Dade County, Florida",
      "national_board_stamps": "None",
      "asme_stamps": "None",
      "country": "United States",
      "id": "miami-dade-county-florida",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/miami-dade-county-florida/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Miami-Dade County, Florida None            None",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Miami, Florida",
      "national_board_stamps": "None",
      "asme_stamps": "None",
      "country": "United States",
      "id": "miami-florida",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/miami-florida/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Miami, Florida             None            None",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Michigan",
      "national_board_stamps": "R**",
      "asme_stamps": "A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, S, U,V",
      "footnotes": "**High-pressure repairs and/or alterations to any boiler.",
      "country": "United States",
      "id": "michigan",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/michigan/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Michigan         R**                     A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, S, U,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Milwaukee, Wisconsin",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "milwaukee-wisconsin",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/milwaukee-wisconsin/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Milwaukee, Wisconsin       NR, R,VR        All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Minnesota",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "minnesota",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/minnesota/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Minnesota        NR, R,VR                All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Mississippi",
      "national_board_stamps": "VR",
      "asme_stamps": "A, E, H, HLW, HV, M, S, U, UV,V",
      "country": "United States",
      "id": "mississippi",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/mississippi/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Mississippi      VR                      A, E, H, HLW, HV, M, S, U, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Missouri",
      "national_board_stamps": "R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "missouri",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/missouri/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Missouri         R,VR                    All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Montana",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HV, S",
      "country": "United States",
      "id": "montana",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/montana/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Montana          R,VR                    A, E, H, HV, S",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Nebraska",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S, U, U2, U3,V",
      "country": "United States",
      "id": "nebraska",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/nebraska/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Nebraska         R,VR                    A, E, H, HLW, HV, M, PP, S, U, U2, U3,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Nevada",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, NV, PP, S, U, U2, UM, UV,V",
      "country": "United States",
      "id": "nevada",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/nevada/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Nevada           NR, R,VR                A, E, H, HLW, HV, M, NV, PP, S, U, U2, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "New Brunswick",
      "national_board_stamps": "NR, R*,VR",
      "asme_stamps": "H, HLW, N, NV, PP, S, U",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "new-brunswick",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/new-brunswick/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "New Brunswick               NR, R*,VR                 H, HLW, N, NV, PP, S, U",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "New Hampshire",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "A, H, N, NA, NPT, PP, S, U, UV",
      "country": "United States",
      "id": "new-hampshire",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/new-hampshire/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "New Hampshire    NR, R,VR                A, H, N, NA, NPT, PP, S, U, UV",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "New Jersey",
      "national_board_stamps": "R",
      "asme_stamps": "All",
      "country": "United States",
      "id": "new-jersey",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/new-jersey/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "New Jersey       R                       All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "New Mexico",
      "national_board_stamps": "None",
      "asme_stamps": "A, E, H, HLW, HV, PP, S,V",
      "country": "United States",
      "id": "new-mexico",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/new-mexico/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "New Mexico       None                    A, E, H, HLW, HV, PP, S,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "New Orleans, Louisiana",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "new-orleans-louisiana",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/new-orleans-louisiana/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "New Orleans, Louisiana     NR, R,VR        All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "New York",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, M, PP, S, U,V",
      "country": "United States",
      "id": "new-york",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/new-york/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "New York         R,VR                    A, E, H, M, PP, S, U,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "New York, New York",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, H, HLW, M, PP, S, UV,V",
      "country": "United States",
      "id": "new-york-new-york",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/new-york-new-york/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "New York, New York         R,VR            A, H, HLW, M, PP, S, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Newfoundland and Labrador",
      "national_board_stamps": "R*",
      "asme_stamps": "All when manufactured outside Canada",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "newfoundland-and-labrador",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/newfoundland-and-labrador/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Newfoundland and Labra-     R*                        All when manufactured outside Canada",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "North Carolina",
      "national_board_stamps": "R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "north-carolina",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/north-carolina/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "North Carolina   R,VR                    All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "North Dakota",
      "national_board_stamps": "NB, R,VR, T/O",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, RP, S, U, U2, U3, UD, UV, UV3,V",
      "country": "United States",
      "id": "north-dakota",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/north-dakota/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "North Dakota     NB, R,VR, T/O           A, E, H, HLW, HV, M, PP, RP, S, U, U2, U3, UD, UV, UV3,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Northwest Territories",
      "national_board_stamps": "R*",
      "asme_stamps": "A, E, H, HLW, HV, M, S, U, U2, UM, UV,V",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "northwest-territories",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/northwest-territories/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Northwest Territories       R*                        A, E, H, HLW, HV, M, S, U, U2, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Nova Scotia",
      "national_board_stamps": "R*,VR",
      "asme_stamps": "A, H, HLW, HV, M, PP, S, U, U2, U3, UM, UV,V",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "nova-scotia",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/nova-scotia/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Nova Scotia                 R*,VR                     A, H, HLW, HV, M, PP, S, U, U2, U3, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Nunavut Territory",
      "national_board_stamps": "R*",
      "asme_stamps": "A, E, H, HLW, HV, M, S, U, U2, UM, UV,V",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "nunavut-territory",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/nunavut-territory/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Nunavut Territory           R*                        A, E, H, HLW, HV, M, S, U, U2, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Ohio",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "ohio",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/ohio/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Ohio             NR, R,VR                All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Oklahoma",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S, U, U2, U3, UM, UV,V",
      "country": "United States",
      "id": "oklahoma",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/oklahoma/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Oklahoma         R,VR                    A, E, H, HLW, HV, M, PP, S, U, U2, U3, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Omaha, Nebraska",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S, U, U2, U3,V",
      "country": "United States",
      "id": "omaha-nebraska",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/omaha-nebraska/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Omaha, Nebraska            R,VR            A, E, H, HLW, HV, M, PP, S, U, U2, U3,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Ontario",
      "national_board_stamps": "R*",
      "asme_stamps": "All",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "ontario",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/ontario/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Ontario                     R*                        All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Oregon",
      "national_board_stamps": "R,VR, T/O",
      "asme_stamps": "A, H, HLW, PP, S, U, U2, U3, UM,V",
      "country": "United States",
      "id": "oregon",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/oregon/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Oregon           R,VR, T/O               A, H, HLW, PP, S, U, U2, U3, UM,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Pennsylvania",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, S, U, U2, U3, UM, UV,V",
      "country": "United States",
      "id": "pennsylvania",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/pennsylvania/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Pennsylvania     NR, R,VR                A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, S, U, U2, U3, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Prince Edward Island",
      "national_board_stamps": "NR, R*,VR",
      "asme_stamps": "H, HLW, HV, M, N, NA, NPT, NV, S, U, U2, UV,V",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "prince-edward-island",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/prince-edward-island/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Prince Edward Island        NR, R*,VR                 H, HLW, HV, M, N, NA, NPT, NV, S, U, U2, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Puerto Rico",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "puerto-rico",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/puerto-rico/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Puerto Rico                NR, R,VR        All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Qu\u00e9bec",
      "national_board_stamps": "R*",
      "asme_stamps": "All when manufactured in the United States",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "qu-bec",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/qu-bec/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Qu\u00e9bec                      R*                        All when manufactured in the United States",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Rhode Island",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "rhode-island",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/rhode-island/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Rhode Island     NR, R,VR                All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Saskatchewan",
      "national_board_stamps": "R*",
      "asme_stamps": "All",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "saskatchewan",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/saskatchewan/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Saskatchewan                R*                        All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Seattle, Washington",
      "national_board_stamps": "All",
      "asme_stamps": "All",
      "country": "United States",
      "id": "seattle-washington",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/seattle-washington/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Seattle, Washington        All             All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "South Carolina",
      "national_board_stamps": "R",
      "asme_stamps": "H, HLW, S, U (fired meet Sec VIII Div 1 or Div 2)",
      "country": "United States",
      "id": "south-carolina",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/south-carolina/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "South Carolina   R                       H, HLW, S, U (fired meet Sec VIII Div 1 or Div 2)",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "South Dakota",
      "national_board_stamps": "None",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S,V",
      "country": "United States",
      "id": "south-dakota",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/south-dakota/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "South Dakota     None                    A, E, H, HLW, HV, M, PP, S,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Spokane, Washington",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, M, PP, S, U, U2, UV,V",
      "country": "United States",
      "id": "spokane-washington",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/spokane-washington/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Spokane, Washington        R,VR            A, E, H, HLW, M, PP, S, U, U2, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "St. Louis, Missouri",
      "national_board_stamps": "R",
      "asme_stamps": "H, S, U, U2",
      "country": "United States",
      "id": "st-louis-missouri",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/st-louis-missouri/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "St. Louis, Missouri        R               H, S, U, U2",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Tennessee",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "tennessee",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/tennessee/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Tennessee        NR, R,VR                All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Texas",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, S, U, UD, U2, UV,V",
      "country": "United States",
      "id": "texas",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/texas/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Texas                   NR, R,VR                  A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, S, U, UD, U2, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Utah",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, RP, S, U, U2, U3, UM, UV,V",
      "country": "United States",
      "id": "utah",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/utah/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Utah                    NR, R,VR                  A, E, H, HLW, HV, M, N, NA, NPT, NV, PP, RP, S, U, U2, U3, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Vermont",
      "national_board_stamps": "R,VR",
      "asme_stamps": "A, E, H, HLW, HV, M, PP, S, U, U2, UM, UV,V",
      "country": "United States",
      "id": "vermont",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/vermont/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Vermont                 R,VR                      A, E, H, HLW, HV, M, PP, S, U, U2, UM, UV,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Virginia",
      "national_board_stamps": "R",
      "asme_stamps": "All",
      "country": "United States",
      "id": "virginia",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/virginia/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Virginia                R                         All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Washington",
      "national_board_stamps": "NB, NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "washington",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/washington/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Washington              NB, NR, R,VR              All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Washington, D. C.",
      "national_board_stamps": "VR",
      "asme_stamps": "A, E, H, PP, U",
      "country": "United States",
      "id": "washington-d-c",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/washington-d-c/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Washington, D. C.          VR              A, E, H, PP, U",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "West Virginia",
      "national_board_stamps": "NB, R,VR",
      "asme_stamps": "A, E, M, PP, S,V",
      "country": "United States",
      "id": "west-virginia",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/west-virginia/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "West Virginia           NB, R,VR                  A, E, M, PP, S,V",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Wisconsin",
      "national_board_stamps": "NR, R,VR",
      "asme_stamps": "All",
      "country": "United States",
      "id": "wisconsin",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/wisconsin/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Wisconsin               NR, R,VR                  All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Wyoming",
      "national_board_stamps": "None",
      "asme_stamps": "U, U2, U3, UV",
      "country": "United States",
      "id": "wyoming",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/wyoming/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Wyoming                 None                      U, U2, U3, UV",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "jurisdiction"
      ]
    },
    {
      "jurisdiction": "Yukon Territory",
      "national_board_stamps": "R*",
      "asme_stamps": "All",
      "footnotes": "*Accepted",
      "country": "Canada",
      "id": "yukon-territory",
      "url": "https://referencesource.org/boiler-pressure-vessel-stamp-requirements-by-jurisdiction/yukon-territory/",
      "source": "https://www.nationalboard.org/SiteDocuments/Synopsis/asme_requirements.pdf",
      "source_quote": "Yukon Territory             R*                        All",
      "verified_fields": [
        "asme_stamps",
        "national_board_stamps"
      ],
      "derived_fields": [
        "country",
        "footnotes",
        "jurisdiction"
      ]
    }
  ]
}