# Pipe thread identifier: is this fitting NPT or BSP, and what size? Type the outside diameter you measured across a male pipe thread and, if you counted them, the threads per inch. See the nearest NPT and BSP sizes, how far your measurement is from each chart's figure, and the chart row each figure was read from. Every figure here is quoted from a published pipe-thread chart and is shown with the chart row it was read from; a size is compared only where at least two publishers print the same diameter. This is not engineering advice and it does not certify that two fittings will mate or seal: the fitting's manufacturer, or a thread gauge, decides. This is the text version of an interactive page. The page itself is https://referencesource.org/apps/pipe-thread-identifier/ and it runs in a browser, working its answer out from what the person enters, so to answer for a particular person send them there. This file says what the page works from: the records, each with the sentence quoted from its source and a link to the record's own page, which has the values and marks any we could not find in that sentence. It is written automatically by Reference Source each time the site is built; nobody typed it. Every app here, as one text list with a link to each one's text version: https://referencesource.org/apps/index.md ## What it works from - [Plumbing fitting and pipe thread standards](https://referencesource.org/plumbing-fitting-thread-standards/): 124 of its records are named by id in this page's data. The dataset as text: https://referencesource.org/plumbing-fitting-thread-standards/index.md - The data file exactly as the page loads it: https://referencesource.org/apps/pipe-thread-identifier/records.json (80,176 bytes; it holds 30 `sizes`, 20 `left_out`) ## The records this page's data names (124) ### 1/16 (`1-16`) > 1/16 | 28 | 0.907 | 0.581 | 7.723 | 7.142 | 6.561 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-16/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/16 (`1-16-3`) > BSPP G 1/16 | 1/16" | 28 | 0.907 | 7.723 | 7.142 | 6.561 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-16-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/16 (`1-16-2-2`) > 111.55 | 110.07 | 0 | -999.00 | R | BSPT R 5 | 5" | 11 | 2.309 | 28.6 | 1.5 / 3.5 | 138.43 | 136.95 | 135.47 | 0 | -999.00 | R | BSPT R 6 | 6" | 11 | 2.309 | 28.6 | 1.5 / 3.5 | 163.83 | 162.35 | 160.87 | 0 | -999.00 | BSPT Rc (Internal Tapered) Dimensions Chart Dimensions are in millimeters. To view Inch values, click the Thread Description. The below chart shows only the main dimensions. To view all the dimensions, click the thread description or use the BSPT Thread Calculator . series | Thread | Pipe OD | TPI | Pitch | Gauge Length | Tol (Turns/mm) | Major Diam | Pitch Diam | Minor Diam | Fit Allowance (Turns/mm) | Tap Drill Size | Rc | BSPT Rc 1/16 | 1/16" | 28 | 0.907 | 4.0 | 1.25 / 1.1 | 7.72 | 7.14 | 6.56 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-16-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/8 (`1-8`) > 1/8 | 28 | 0.907 | 0.581 | 9.728 | 9.147 | 8.566 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/8 (`1-8-2-2`) > 1/8 | 28 | 0.0357 | 0.907 | 0.383 | 9.728 | 0.3372 | 8.565 | 0.1563 | 3.97 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-8-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/8 (`1-8-4`) > BSPP G 1/8 | 1/8" | 28 | 0.907 | 9.728 | 9.147 | 8.566 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-8-4/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/8 (`1-8-2-3`) > 111.55 | 110.07 | 0 | -999.00 | R | BSPT R 5 | 5" | 11 | 2.309 | 28.6 | 1.5 / 3.5 | 138.43 | 136.95 | 135.47 | 0 | -999.00 | R | BSPT R 6 | 6" | 11 | 2.309 | 28.6 | 1.5 / 3.5 | 163.83 | 162.35 | 160.87 | 0 | -999.00 | BSPT Rc (Internal Tapered) Dimensions Chart Dimensions are in millimeters. To view Inch values, click the Thread Description. The below chart shows only the main dimensions. To view all the dimensions, click the thread description or use the BSPT Thread Calculator . series | Thread | Pipe OD | TPI | Pitch | Gauge Length | Tol (Turns/mm) | Major Diam | Pitch Diam | Minor Diam | Fit Allowance (Turns/mm) | Tap Drill Size | Rc | BSPT Rc 1/16 | 1/16" | 28 | 0.907 | 4.0 | 1.25 / 1.1 | 7.72 | 7.14 | 6.56 | 0 | 6.4 | Rc | BSPT Rc 1/8 | 1/8" | 28 | 0.907 | 4.0 | 1.25 / 1.1 | 9.73 | 9.15 | 8.57 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-8-2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/8 Inch BSP (`1-8-inch-bsp`) > 1/8 Inch BSP | 9.7 mm | 8.9 mm | 28 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-8-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 1/8 (`bsp-1-8-2`) > -02 (1/8) | 28 | 9.7 | 0.38 | 8.9 | 0.35 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-8-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/8 (`bsp-1-8`) > 1/8 Inch BSP | 9.52 mm / 3/8" | 28 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/4 (`1-4`) > 1/4 | 19 | 1.337 | 0.856 | 13.157 | 12.301 | 11.445 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/4 (`1-4-2-2`) > 1/4 | 19 | 0.0526 | 1.337 | 0.517 | 13.157 | 0.4506 | 11.445 | 0.2367 | 6.012 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-4-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/4 (`1-4-4`) > BSPP G 1/4 | 1/4" | 19 | 1.337 | 13.157 | 12.301 | 11.445 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-4-4/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/4 (`bsp-1-4`) > 1/4 Inch BSP | 13.16 mm / 1/2" | 19 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/4 Inch BSP (`1-4-inch-bsp`) > 1/4 Inch BSP | 13.16 mm | 11.9mm | 19 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-4-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 1/4 (`1-4-2-3`) > 13.16 | 12.30 | 11.45 | 0.104 | 11.5 | Rp | BSPT Rp 3/8 | 3/8" | 19 | 1.337 | 6.4 | 0 | 16.66 | 15.81 | 14.95 | 0.104 | 15.0 | Rp | BSPT Rp 1/2 | 1/2" | 14 | 1.814 | 8.2 | 0 | 20.96 | 19.79 | 18.63 | 0.142 | 18.5 | Rp | BSPT Rp 3/4 | 3/4" | 14 | 1.814 | 9.5 | 0 | 26.44 | 25.28 | 24.12 | 0.142 | 24.0 | Rp | BSPT Rp 1 | 1" | 11 | 2.309 | 10.4 | 0 | 33.25 | 31.77 | 30.29 | 0.180 | 30.2 | Rp | BSPT Rp 1 1/4 | 1 1/4" | 11 | 2.309 | 12.7 | 0 | 41.91 | 40.43 | 38.95 | 0.180 | 39.0 | Rp | BSPT Rp 1 1/2 | 1 1/2" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions: Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-4-2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/4 (`bsp-1-4-2`) > -04 (1/4) | 19 | 13.2 | 0.52 | 11.9 | 0.47 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-4-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/8 (`3-8`) > 3/8 | 19 | 1.337 | 0.856 | 16.662 | 15.806 | 14.950 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/8 (`3-8-2-2`) > 3/8 | 19 | 0.0526 | 1.337 | 0.656 | 16.662 | 0.5886 | 14.95 | 0.25 | 6.25 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-8-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3/8 (`3-8-4`) > BSPP G 3/8 | 3/8" | 19 | 1.337 | 16.662 | 15.806 | 14.950 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-8-4/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3/8 (`bsp-3-8`) > 3/8 Inch BSP | 16.66 mm / 5/8" | 19 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-3-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/8 Inch BSP (`3-8-inch-bsp`) > 3/8 Inch BSP | 16.66 mm | 15.2 mm | 19 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-8-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 3/8 (`3-8-2-3`) > BSPT R 3/8 | 3/8" | 19 | 1.337 | 6.4 | 1.0 / 1.3 | 16.66 | 15.81 | 14.95 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-8-2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3/8 (`bsp-3-8-2`) > -06 (3/8) | 19 | 16.5 | 0.65 | 15.2 | 0.60 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-3-8-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/2 (`1-2`) > 1/2 | 14 | 1.814 | 1.162 | 20.955 | 19.793 | 18.631 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/2 (`1-2-2-2`) > 1/2 | 14 | 0.0714 | 1.814 | 0.825 | 20.955 | 0.7336 | 18.633 | 0.3214 | 8.164 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-2-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/2 (`1-2-4`) > BSPP G 1/2 | 1/2" | 14 | 1.814 | 20.955 | 19.793 | 18.632 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-2-4/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/2 (`1-2-2-3`) > 20.96 | 19.79 | 18.63 | 0.142 | 18.5 | Rp | BSPT Rp 3/4 | 3/4" | 14 | 1.814 | 9.5 | 0 | 26.44 | 25.28 | 24.12 | 0.142 | 24.0 | Rp | BSPT Rp 1 | 1" | 11 | 2.309 | 10.4 | 0 | 33.25 | 31.77 | 30.29 | 0.180 | 30.2 | Rp | BSPT Rp 1 1/4 | 1 1/4" | 11 | 2.309 | 12.7 | 0 | 41.91 | 40.43 | 38.95 | 0.180 | 39.0 | Rp | BSPT Rp 1 1/2 | 1 1/2" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions: Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-2-2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/2 (`bsp-1-2`) > 1/2 Inch BSP | 20.99 mm / 3/4" | 14 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/2 Inch BSP (`1-2-inch-bsp`) > 1/2 Inch BSP | 20.99 mm | 19.1 mm | 14 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-2-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 1/2 (`bsp-1-2-2`) > -08 (1/2) | 14 | 20.8 | 0.82 | 19.1 | 0.75 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-2-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 5/8 (`5-8`) > 0.9020 | 22.911 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/5-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 5/8 (`5-8-2`) > BSPP G 5/8 | 5/8" | 14 | 1.814 | 22.911 | 21.749 | 20.588 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/5-8-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 5/8 (`bsp-5-8`) > 5/8 Inch BSP | 22.99 mm / 7/8" | 14 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-5-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 5/8 Inch BSP (`5-8-inch-bsp`) > 5/8 Inch BSP | 22.99 mm | 20.3 mm | 14 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/5-8-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 5/8 (`bsp-5-8-2`) > -10 (5/8) | 14 | 22.4 | 0.88 | 20.3 | 0.80 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-5-8-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/4 (`3-4`) > 3/4 | 14 | 1.814 | 1.162 | 26.441 | 25.279 | 24.117 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/4 (`3-4-2-2`) > 3/4 | 14 | 0.0714 | 1.814 | 1.041 | 26.441 | 0.9496 | 24.12 | 0.375 | 9.525 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-4-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3/4 (`3-4-4`) > BSPP G 3/4 | 3/4" | 14 | 1.814 | 26.441 | 25.279 | 24.118 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-4-4/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3/4 (`bsp-3-4`) > 3/4 Inch BSP | 26.44 mm / 1" | 14 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-3-4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/4 Inch BSP (`3-4-inch-bsp`) > 3/4 Inch BSP | 26.44 mm | 24.6 mm | 14 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-4-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 3/4 (`3-4-2-3`) > BSPT R 3/4 | 3/4" | 14 | 1.814 | 9.5 | 1.0 / 1.8 | 26.44 | 25.28 | 24.12 | 0 | -999.00 | R | BSPT R 1 | 1" | 11 | 2.309 | 10.4 | 1.0 / 2.3 | 33.25 | 31.77 | 30.29 | 0 | -999.00 | R | BSPT R 1 1/4 | 1 1/4" | 11 | 2.309 | 12.7 | 1.0 / 2.3 | 41.91 | 40.43 | 38.95 | 0 | -999.00 | R | BSPT R 1 1/2 | 1 1/2" | 11 | 2.309 | 12.7 | 1.0 / 2.3 | 47.80 | 46.32 | 44.85 | 0 | -999.00 | R | BSPT R 2 | 2" | 11 | 2.309 | 15.9 | 1.0 / 2.3 | 59.61 | 58.14 | 56.66 | 0 | -999.00 | R | BSPT R 2 1/2 | 2 1/2" | 11 | 2.309 | 17.5 | 1.5 / 3.5 | 75.18 | 73.71 | 72.23 | 0 | -999.00 | R | BSPT R 3 | 3" | 11 | 2.309 | 20.6 | 1.5 / 3.5 | 87.88 | 86.41 | 84.93 | 0 | -999.00 | R | BSPT R 4 | 4" | 11 | 2.309 | 25.4 | 1.5 / 3.5 | 113.03 | 111.55 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-4-2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3/4 (`bsp-3-4-2`) > -12 (3/4) | 14 | 26.4 | 1.04 | 24.6 | 0.97 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-3-4-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 7/8 (`7-8`) > 1.1890 | 30.201 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/7-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 7/8 (`7-8-2`) > BSPP G 7/8 | 7/8" | 14 | 1.814 | 30.201 | 29.039 | 27.878 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/7-8-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1 (`1`) > 1 | 11 | 2.309 | 1.479 | 33.249 | 31.770 | 30.291 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1 (`1-6`) > 1 | 11 | 0.0909 | 2.309 | 1.309 | 33.249 | 1.1926 | 30.292 | 0.4091 | 10.391 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-6/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1 (`1-10`) > BSPP G 1 | 1" | 11 | 2.309 | 33.249 | 31.770 | 30.292 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-10/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1 (`bsp-1`) > 1 Inch BSP | 33.25 mm / 1-1/4" | 11 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1 Inch BSP (`1-inch-bsp`) > 1 Inch BSP | 33.25 mm | 31.0 mm | 11 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 1 (`bspt-1`) > BSPT R 1 | 1" | 11 | 2.309 | 10.4 | 1.0 / 2.3 | 33.25 | 31.77 | 30.29 | 0 | -999.00 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bspt-1/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1-1/8 (`1-1-8`) > 1.4920 | 37.897 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1 1/8 (`1-1-8-2`) > BSPP G 1 1/8 | 1 1/8" | 11 | 2.309 | 37.897 | 36.418 | 34.940 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-8-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1-1/4 (`1-1-4`) > 1¼ | 11 | 2.309 | 1.479 | 41.910 | 40.431 | 38.952 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1 1/4 (`1-1-4-3`) > BSPP G 1 1/4 | 1 1/4" | 11 | 2.309 | 41.910 | 40.431 | 38.953 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1¼ (`1-7`) > 1¼ | 11 | 0.0909 | 2.309 | 1.65 | 41.91 | 1.5336 | 38.953 | 0.5 | 12.7 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-7/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1-1/4 (`bsp-1-1-4`) > 1-1/4 Inch BSP | 41.91 mm / 1.-1/2" | 11 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-1-4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1-1/4 Inch BSP (`1-1-4-inch-bsp`) > 1-1/4 Inch BSP | 41.91 mm | 39.6 mm | 11 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 1 1/4 (`1-1-4-2-2`) > BSPT Rp 1 1/4 | 1 1/4" | 11 | 2.309 | 12.7 | 0 | 41.91 | 40.43 | 38.95 | 0.180 | 39.0 | Rp | BSPT Rp 1 1/2 | 1 1/2" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions: Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1 ¼ (`bsp-1-3`) > -20 (1 ¼) | 11 | 41.9 | 1.65 | 39.6 | 1.56 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-3/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1-1/2 (`1-1-2`) > 1½ | 11 | 2.309 | 1.479 | 47.803 | 46.324 | 44.845 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1 1/2 (`1-1-2-3`) > BSPP G 1 1/2 | 1 1/2" | 11 | 2.309 | 47.803 | 46.324 | 44.846 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1-1/2 (`bsp-1-1-2`) > 1-1/2 Inch BSP | 47.80 mm / 1-3/4" | 11 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-1-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1-1/2 Inch BSP (`1-1-2-inch-bsp`) > 1-1/2 Inch BSP | 47.80 mm | 45.5 mm | 11 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 1 1/2 (`1-1-2-2-2`) > BSPT Rp 1 1/2 | 1 1/2" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions: Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1 ½ (`bsp-1-5`) > -24 (1 ½) | 11 | 47.8 | 1.88 | 45.5 | 1.79 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-5/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1½ (`1-9`) > 1½ | 11 | 0.0909 | 2.309 | 1.882 | 46.803 | 1.7656 | 44.846 | 0.5 | 12.7 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-9/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 2 (`2`) > 2 | 11 | 2.309 | 1.479 | 59.614 | 58.135 | 56.656 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 2 (`2-5`) > BSPP G 2 | 2" | 11 | 2.309 | 59.614 | 58.135 | 56.657 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-5/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 2 (`bsp-2`) > 2 Inch BSP | 59.61 mm / 2-1/4" | 11 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 2 Inch BSP (`2-inch-bsp`) > 2 Inch BSP | 59.61 mm | 57.4 mm | 11 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-inch-bsp/index.md · last checked 2026-11-15 · due a re-check by 2028-11-14 ### 2 (`bspt-2`) > BSPT R 2 | 2" | 11 | 2.309 | 15.9 | 1.0 / 2.3 | 59.61 | 58.14 | 56.66 | 0 | -999.00 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bspt-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 2 (`bsp-2-2`) > -32 (2) | 11 | 59.7 | 2.35 | 57.4 | 2.26 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bsp-2-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 2-1/2 (`2-1-2`) > 2½ | 11 | 2.309 | 1.479 | 75.184 | 73.705 | 72.226 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-1-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 2½ (`2-4`) > 2½ | 11 | 0.0909 | 2.309 | 2.96 | 75.184 | 2.8436 | 72.227 | 0.6875 | 17.463 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-4/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 2 1/2 (`2-1-2-3`) > BSPP G 2 1/2 | 2 1/2" | 11 | 2.309 | 75.184 | 73.705 | 72.227 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 2 1/2 (`2-1-2-2-2`) > BSPT Rp 2 1/2 | 2 1/2" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions: Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3 (`3`) > 3 | 11 | 2.309 | 1.479 | 87.884 | 86.405 | 84.926 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3 (`3-2-2`) > 3 | 11 | 0.0909 | 2.309 | 3.46 | 87.884 | 3.3436 | 84.927 | 0.8125 | 20.638 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3 (`3-5`) > BSPP G 3 | 3" | 11 | 2.309 | 87.884 | 86.405 | 84.927 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-5/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3 (`bspt-3`) > BSPT R 3 | 3" | 11 | 2.309 | 20.6 | 1.5 / 3.5 | 87.88 | 86.41 | 84.93 | 0 | -999.00 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bspt-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 4 (`4`) > 4 | 11 | 2.309 | 1.479 | 113.030 | 111.551 | 110.072 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 4 (`4-4`) > BSPP G 4 | 4" | 11 | 2.309 | 113.030 | 111.551 | 110.073 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/4-4/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 4 (`4-2-2`) > 4 | 11 | 0.0909 | 2.309 | 4.45 | 113.03 | 4.3336 | 110.073 | N/A | N/A Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/4-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 4 (`bspt-4`) > BSPT R 4 | 4" | 11 | 2.309 | 25.4 | 1.5 / 3.5 | 113.03 | 111.55 | 110.07 | 0 | -999.00 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bspt-4/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 5 (`5-2`) > 5.4500 | 138.430 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/5-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 5 (`5-3`) > BSPP G 5 | 5" | 11 | 2.309 | 138.430 | 136.951 | 135.473 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/5-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 5 (`bspt-5`) > BSPT R 5 | 5" | 11 | 2.309 | 28.6 | 1.5 / 3.5 | 138.43 | 136.95 | 135.47 | 0 | -999.00 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bspt-5/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 6 (`6`) > 6 | 11 | 2.309 | 1.479 | 163.830 | 162.351 | 160.872 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/6/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 6 (`6-3`) > BSPP G 6 | 6" | 11 | 2.309 | 163.830 | 162.351 | 160.873 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/6-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 6 (`bspt-6`) > BSPT R 6 | 6" | 11 | 2.309 | 28.6 | 1.5 / 3.5 | 163.83 | 162.35 | 160.87 | 0 | -999.00 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/bspt-6/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/8 (`1-8-2`) > 1 ⁄ 8 | 27 | 0.03703704 | 0.9407 | 0.1615 | 4.36 | 0.37360 | 0.2639 | 7.13 | 0.38000 | 0.3924 | 0.405 | 10.287 | 0.339 | 8.6106 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-8-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/8 (`1-8-3`) > 1/8 | 27 | 0.03704 | 0.94082 | 0.405 | 10.29 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-8-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/8 (`npt-1-8`) > -02 (1/8) | 27 | 10.3 | 0.41 | 9.4 | 0.37 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-1-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/4 (`1-4-2`) > 1 ⁄ 4 | 18 | 0.05555555 | 1.4111 | 0.2278 | 4.10 | 0.49163 | 0.4018 | 7.23 | 0.50250 | 0.5946 | 0.540 | 13.716 | 7 ⁄ 16 | 11.113 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-4-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/4 (`1-4-3`) > 1/4 | 18 | 0.05556 | 1.41122 | 0.54 | 13.72 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-4-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/4 (`npt-1-4`) > -04 (1/4) | 18 | 13.7 | 0.54 | 12.4 | 0.49 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-1-4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/8 (`3-8-2`) > 3 ⁄ 8 | 18 | 0.05555555 | 1.4111 | 0.2400 | 4.32 | 0.62701 | 0.4078 | 7.34 | 0.63750 | 0.6006 | 0.675 | 17.145 | 37 ⁄ 64 | 14.684 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-8-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/8 (`3-8-3`) > 3/8 | 18 | 0.05556 | 1.41122 | 0.675 | 17.15 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-8-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3/8 (`npt-3-8`) > -06 (3/8) | 18 | 17.3 | 0.68 | 15.7 | 0.62 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-3-8/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/2 (`1-2-2`) > 1 ⁄ 2 | 14 | 0.07142857 | 1.8143 | 0.3200 | 4.48 | 0.77843 | 0.5337 | 7.47 | 0.79178 | 0.7815 | 0.840 | 21.3360 | 23 ⁄ 32 | 18.2563 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-2-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1/2 (`1-2-3`) > 1/2 | 14 | 0.07143 | 1.81432 | 0.84 | 21.34 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1/2 (`npt-1-2`) > -08 (1/2) | 14 | 21.3 | 0.84 | 19.3 | 0.76 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-1-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/4 (`3-4-2`) > 3 ⁄ 4 | 14 | 0.07142857 | 1.8143 | 0.3390 | 4.75 | 0.98887 | 0.5457 | 7.64 | 1.00178 | 0.7935 | 1.050 | 26.6700 | 59 ⁄ 64 | 23.4156 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-4-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3/4 (`3-4-3`) > 3/4 | 14 | 0.07143 | 1.81432 | 1.05 | 26.67 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-4-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3/4 (`npt-3-4`) > -12 (3/4) | 14 | 26.9 | 1.06 | 24.9 | 0.98 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-3-4/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1 (`1-3`) > 1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-3/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1 · NPT (`npt-1-6`) > 1 | 11½ | 0.08696 | 2.20878 | 1.315 | 33.4 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-1-6/index.md · last checked 2026-08-31 · due a re-check by 2028-08-30 ### 1 (`npt-1`) > -16 (1) | 11½ | 33.3 | 1.31 | 31.5 | 1.24 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-1/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1-1/4 (`1-1-4-2`) > 1+ 1 ⁄ 4 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.58338 | 0.7068 | 8.13 | 1.60131 | 1.0085 | 1.660 | 42.1640 | 1+ 1 ⁄ 2 | 38.1000 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1¼ (`1-3-2`) > 1¼ | 11½ | 0.08696 | 2.20878 | 1.66 | 42.16 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-3-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1 ¼ (`npt-1-3`) > -20 (1 ¼) | 11½ | 42.2 | 1.66 | 40.1 | 1.58 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-1-3/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1-1/2 (`1-1-2-2`) > 1+ 1 ⁄ 2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.82234 | 0.7235 | 8.32 | 1.84131 | 1.0252 | 1.900 | 48.2600 | 1+ 47 ⁄ 64 | 44.0531 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 1½ (`1-5`) > 1½ | 11½ | 0.08695 | 2.20878 | 1.9 | 48.26 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/1-5/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 1 ½ (`npt-1-5`) > -24 (1 ½) | 11½ | 48.3 | 1.90 | 46.2 | 1.82 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-1-5/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 2 (`2-2`) > 2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 2 (`2-3`) > 2 | 11½ | 0.08696 | 2.20878 | 2.375 | 60.33 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 2 (`npt-2`) > -32 (2) | 11½ | 60.4 | 2.38 | 57.9 | 2.29 Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/npt-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 2-1/2 (`2-1-2-2`) > 2+ 1 ⁄ 2 | 8 | 0.12500000 | 3.1750 | 0.6820 | 5.46 | 2.76216 | 1.1375 | 9.10 | 2.79063 | 1.5712 | 2.875 | 73.0250 | 2+ 5 ⁄ 8 | 66.6750 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 2½ (`2-2-2`) > 2½ | 8 | 0.125 | 3.175 | 2.875 | 73.03 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/2-2-2/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 3 (`3-2`) > 3 | 8 | 0.12500000 | 3.1750 | 0.7660 | 6.13 | 3.38850 | 1.2000 | 9.60 | 3.41563 | 1.6337 | 3.500 | 88.9000 | 3+ 1 ⁄ 4 | 82.5500 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 3 (`3-3`) > 3 | 8 | 0.125 | 3.175 | 3.5 | 88.9 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/3-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11 ### 4 (`4-2`) > 4 | 8 | 0.12500000 | 3.1750 | 0.8440 | 6.75 | 4.38713 | 1.3000 | 10.40 | 4.41563 | 1.7337 | 4.500 | 114.3000 | 4+ 1 ⁄ 4 | 107.9500 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/4-2/index.md · last checked 2026-11-16 · due a re-check by 2028-11-15 ### 4 (`4-3`) > 4 | 8 | 0.125 | 3.175 | 4.5 | 114.3 | Source: Record: https://referencesource.org/plumbing-fitting-thread-standards/4-3/index.md · last checked 2026-08-12 · due a re-check by 2028-08-11